platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_vf-module-topology-operation-activate.xml

   1 <service-logic\r
   2     xmlns='http://www.onap.org/sdnc/svclogic'\r
   3     xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='GENERIC-RESOURCE-API' version='${project.version}'>\r
   4     <method rpc='vf-module-topology-operation-activate' mode='sync'>\r
   5         <block atomic="true">\r
   6             <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode' method='readProperties' >\r
   7                 <parameter name='fileName' value='%SDNC_CONFIG_DIR%/generic-resource-api-dg.properties' />\r
   8                 <parameter name='contextPrefix' value='prop' />\r
   9             </execute>\r
  10             <switch test='`$vf-module-topology-operation-input.request-information.request-action`'>\r
  11                 <outcome value='CreateVfModuleInstance'>\r
  12                     <block></block>\r
  13                 </outcome>\r
  14                 <outcome value='Other'>\r
  15                     <return status='failure'>\r
  16                         <parameter name='ack-final' value='Y'/>\r
  17                         <parameter name="error-code" value="500" />\r
  18                         <parameter name="error-message" value="If svc-action is 'activate' then request-action must be 'CreateVfModuleInstance'" />\r
  19                     </return>\r
  20                 </outcome>\r
  21             </switch>\r
  22             <set>\r
  23                 <parameter name='vnf-index' value='-1' />\r
  24             </set>\r
  25             <switch test='`$service-data.vnfs.vnf_length`'>\r
  26                 <outcome value=''>\r
  27                     <return status='failure'>\r
  28                         <parameter name='ack-final' value='Y'/>\r
  29                         <parameter name="error-code" value="500" />\r
  30                         <parameter name="error-message" value="There are no VNFs defined in MD-SAL" />\r
  31                     </return>\r
  32                 </outcome>\r
  33                 <outcome value='Other'>\r
  34                     <for index='idx' start='0' end='`$service-data.vnfs.vnf_length`' >\r
  35                         <switch test='`$service-data.vnfs.vnf[$idx].vnf-id == $vf-module-topology-operation-input.vnf-information.vnf-id`'>\r
  36                             <outcome value='true'>\r
  37                                 <block>\r
  38                                     <set>\r
  39                                         <parameter name='vnf-index' value='`$idx`' />\r
  40                                     </set>\r
  41                                     <break/>\r
  42                                 </block>\r
  43                             </outcome>\r
  44                         </switch>\r
  45                     </for>\r
  46                 </outcome>\r
  47             </switch>\r
  48             <switch test='`$vnf-index`'>\r
  49                 <outcome value='-1'>\r
  50                     <return status='failure'>\r
  51                         <parameter name='ack-final' value='Y'/>\r
  52                         <parameter name="error-code" value="500" />\r
  53                         <parameter name="error-message" value="`'Unable to find VNF ID ' + $vf-module-topology-operation-input.vnf-information.vnf-id + ' in MD-SAL'`" />\r
  54                     </return>\r
  55                 </outcome>\r
  56             </switch>\r
  57             <set>\r
  58                 <parameter name='vf-module-index' value='-1' />\r
  59             </set>\r
  60             <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`'>\r
  61                 <outcome value=''>\r
  62                     <return status='failure'>\r
  63                         <parameter name='ack-final' value='Y'/>\r
  64                         <parameter name="error-code" value="500" />\r
  65                         <parameter name="error-message" value="`'There are no VF modules defined in MD-SAL for VNF ' + $vf-module-topology-operation-input.vnf-information.vnf-id`" />\r
  66                     </return>\r
  67                 </outcome>\r
  68                 <outcome value='Other'>\r
  69                     <for index='idx' start='0' end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`' >\r
  70                         <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$idx].vf-module-id == $vf-module-topology-operation-input.vf-module-information.vf-module-id`'>\r
  71                             <outcome value='true'>\r
  72                                 <block>\r
  73                                     <set>\r
  74                                         <parameter name='vf-module-index' value='`$idx`' />\r
  75                                     </set>\r
  76                                     <break/>\r
  77                                 </block>\r
  78                             </outcome>\r
  79                         </switch>\r
  80                     </for>\r
  81                 </outcome>\r
  82             </switch>\r
  83             <switch test='`$vf-module-index`'>\r
  84                 <outcome value='-1'>\r
  85                     <return status='failure'>\r
  86                         <parameter name='ack-final' value='Y'/>\r
  87                         <parameter name="error-code" value="500" />\r
  88                         <parameter name="error-message" value="`'Unable to find VF module ID ' + $vf-module-topology-operation-input.vf-module-information.vf-module-id + ' in MD-SAL'`" />\r
  89                     </return>\r
  90                 </outcome>\r
  91             </switch>\r
  92             <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vlan-vnfc-instance-groups.vlan-vnfc-instance-group_length`'>\r
  93                 <outcome value=''>\r
  94                     <block></block>\r
  95                 </outcome>\r
  96                 <outcome value='0'>\r
  97                     <block></block>\r
  98                 </outcome>\r
  99                 <outcome value='Other'>\r
 100                     <call module='GENERIC-RESOURCE-API' rpc='vf-module-topology-vlan-tagging-activate' mode='sync' >\r
 101                         <outcome value='failure'>\r
 102                             <return status='failure'></return>\r
 103                         </outcome>\r
 104                     </call>\r
 105                 </outcome>\r
 106             </switch>\r
 107             <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"\r
 108    resource="vf-module"\r
 109    key="vf-module.vf-module-id = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id\r
 110       AND generic-vnf.vnf-id = $service-data.vnfs.vnf[$vnf-index].vnf-id"\r
 111    force="true" pfx="tmp.AnAI-data">\r
 112                 <parameter name="orchestration-status" value="Active" />\r
 113                 <outcome value='failure'>\r
 114                     <return status='failure'>\r
 115                         <parameter name='ack-final' value='Y'/>\r
 116                         <parameter name="error-code" value="500" />\r
 117                         <parameter name="error-message" value="Error updating vf-module in AAI" />\r
 118                     </return>\r
 119                 </outcome>\r
 120                 <outcome value='not-found'>\r
 121                     <return status='failure'>\r
 122                         <parameter name='ack-final' value='Y'/>\r
 123                         <parameter name="error-code" value="500" />\r
 124                         <parameter name="error-message" value="`'No vf-module found in AAI for vf module ID ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id`" />\r
 125                     </return>\r
 126                 </outcome>\r
 127             </update>\r
 128             <for silentFailure='true' index='vm-type-index' start='0'\r
 129   end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm_length`' >\r
 130                 <for silentFailure='true' index='vnfc-index' start='0' end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vnfc-names_length`' >\r
 131                     <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"\r
 132    resource="vnfc"\r
 133    key="vnfc.vnfc-name = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vnfc-names[$vnfc-index].vnfc-name"\r
 134    force="true" pfx="tmp.AnAI-data">\r
 135                         <parameter name="orchestration-status" value="Active" />\r
 136                         <parameter name="prov-status" value="NVTPROV" />\r
 137                         <outcome value='failure'>\r
 138                             <return status='failure'>\r
 139                                 <parameter name='ack-final' value='Y'/>\r
 140                                 <parameter name="error-code" value="500" />\r
 141                                 <parameter name="error-message" value="Error updating vnfc in AAI" />\r
 142                             </return>\r
 143                         </outcome>\r
 144                         <outcome value='not-found'>\r
 145                             <return status='failure'>\r
 146                                 <parameter name='ack-final' value='Y'/>\r
 147                                 <parameter name="error-code" value="500" />\r
 148                                 <parameter name="error-message" value="`'No vnfc found in AAI for vnfc name ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vnfc-names[$vnfc-index].vnfc-name`" />\r
 149                             </return>\r
 150                         </outcome>\r
 151                     </update>\r
 152                 </for>\r
 153             </for>\r
 154             <update resource='SQL' force='true' plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' \r
 155   key='UPDATE EIPAM_IP_ASSIGNMENTS SET status = "ACTIVE" WHERE info = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id'>\r
 156                 <outcome value='failure'>\r
 157                     <return status='failure'>\r
 158                         <parameter name='ack-final' value='Y'/>\r
 159                         <parameter name="error-code" value="500" />\r
 160                         <parameter name="error-message" value="Error updating EIPAM_IP_ASSIGNMENTS table" />\r
 161                     </return>\r
 162                 </outcome>\r
 163             </update>\r
 164             <set>\r
 165                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.sdnc-request-header.'\r
 166    value='$vf-module-topology-operation-input.sdnc-request-header.' />\r
 167                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.request-information.'\r
 168    value='$vf-module-topology-operation-input.request-information.' />\r
 169                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.service-information.'\r
 170    value='$vf-module-topology-operation-input.service-information.' />\r
 171                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vnf-information.'\r
 172    value='$vf-module-topology-operation-input.vnf-information.' />\r
 173                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-information.'\r
 174    value='$vf-module-topology-operation-input.vf-module-information.' />\r
 175                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-request-input.'\r
 176    value='$vf-module-topology-operation-input.vf-module-request-input.' />\r
 177             </set>\r
 178             <set>\r
 179                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.order-status'\r
 180   value='Created' />\r
 181                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.last-rpc-action'\r
 182   value='`$vf-module-topology-operation-input.sdnc-request-header.svc-action`' />\r
 183                 <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.last-action'\r
 184   value='`$vf-module-topology-operation-input.sdnc-request-header.request-action`' />\r
 185             </set>\r
 186             <execute plugin='org.onap.ccsdk.sli.core.slipluginutils.SliPluginUtils' method='printContext' >\r
 187                 <parameter name='filename' value='/var/tmp/bgb-vfmoduleactivate.log' />\r
 188             </execute>\r
 189             <return status='success'>\r
 190                 <parameter name="ack-final-indicator" value="Y" />\r
 191                 <parameter name="error-code" value="200" />\r
 192                 <parameter name="error-message" value="`$error-message`" />\r
 193             </return>\r
 194         </block>\r
 195     </method>\r
 196 </service-logic>