auth/sample/bin/service.sh

   1 #!/bin/bash
   2 #########
   3 #  ============LICENSE_START====================================================
   4 #  org.onap.aaf
   5 #  ===========================================================================
   6 #  Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
   7 #  ===========================================================================
   8 #  Licensed under the Apache License, Version 2.0 (the "License");
   9 #  you may not use this file except in compliance with the License.
  10 #  You may obtain a copy of the License at
  11 #
  12 #       http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 #  Unless required by applicable law or agreed to in writing, software
  15 #  distributed under the License is distributed on an "AS IS" BASIS,
  16 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  17 #  See the License for the specific language governing permissions and
  18 #  limitations under the License.
  19 #  ============LICENSE_END====================================================
  20 #
  21 # This script is run when starting aaf_config Container.
  22 #  It needs to cover the cases where the initial data doesn't exist, and when it has already been configured (don't overwrite)
  23 #
  24
  25 echo "# Properties passed in"
  26     for P in `env`; do
  27       if [[ "$P" == cadi* ]] || [[ "$P" == aaf* ]] || [[ "$P" == HOSTNAME* ]]; then
  28         S="${P/_helm/.helm}"
  29         S="${S/_oom/.oom}"
  30         echo "$S"
  31       fi
  32     done
  33
  34 # Set from CAP Based PROPS, if necessary
  35 aaf_env=${aaf_env:-"${AAF_ENV}"}
  36 aaf_deployed_version=${aaf_deployed_version:-"${VERSION}"}
  37 cadi_latitude=${cadi_latitude:-"${LATITUDE}"}
  38 cadi_longitude=${cadi_longitude:-"${LONGITUDE}"}
  39 cadi_x509_issuers=${cadi_x509_issuers:-"${CADI_X509_ISSUERS}"}
  40 aaf_locate_url=${aaf_locate_url:-"https://${HOSTNAME}:8095"}
  41
  42 JAVA=${JAVA_HOME}/bin/java
  43
  44 OSAAF=/opt/app/osaaf
  45 LOCAL=$OSAAF/local
  46 DATA=$OSAAF/data
  47 PUBLIC=$OSAAF/public
  48 CONFIG=/opt/app/aaf_config
  49
  50 JAVA_CADI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar org.onap.aaf.cadi.CmdLine"
  51 JAVA_AGENT="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.cadi.configure.Agent"
  52 JAVA_AAFCLI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.auth.cmd.AAFcli"
  53 JAVA_AAFBATCH="$JAVA -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.batch.props -jar $CONFIG/bin/aaf-auth-batch-*-full.jar"
  54
  55 # If doesn't exist... still create
  56 mkdir -p $OSAAF
  57
  58 # If not created by separate PV, create
  59 mkdir -p /opt/app/aaf/status
  60
  61 # Temp use for clarity of code
  62 FILE=
  63
  64 # Setup Bash, first time only
  65 if [ ! -e "$HOME/.bashrc" ] || [ -z "$(grep cadi $HOME/.bashrc)" ]; then
  66   echo "alias cadi='$JAVA_CADI \$*'" >>$HOME/.bashrc
  67   echo "alias agent='$CONFIG/bin/agent.sh \$*'" >>$HOME/.bashrc
  68   echo "alias aafcli='$JAVA_AAFCLI \$*'" >>$HOME/.bashrc
  69   echo "alias batch='$JAVA_AAFBATCH \$*'" >>$HOME/.bashrc
  70   chmod a+x $CONFIG/bin/agent.sh
  71   . $HOME/.bashrc
  72 fi
  73
  74 # Only load Identities once
  75 # echo "Check Identities"
  76 FILE="$DATA/identities.dat"
  77 if [ ! -e $FILE ]; then
  78     mkdir -p $DATA
  79     cp $CONFIG/data/sample.identities.dat $FILE
  80     echo "Set Identities"
  81     INITIALIZED="true"
  82 fi
  83
  84 # Should we clean up?
  85 if [ ! -e "${LOCAL}/VERSION" ] || [ "${VERSION}" != "$(cat ${LOCAL}/VERSION)" ]; then
  86   echo "Clean up directory ${LOCAL}"
  87   rm -Rf ${LOCAL}/org.osaaf.aaf.*props ${LOCAL}/org.osaaf.aaf.p12
  88   ls ${LOCAL}
  89 fi
  90 echo "${VERSION}" > $LOCAL/VERSION
  91
  92 # Load up Cert/X509 Artifacts
  93 # echo "Check Signer Keyfile"
  94 FILE="$LOCAL/org.osaaf.aaf.signer.p12"
  95 if [ ! -e $FILE ]; then
  96     mkdir -p $LOCAL
  97     mkdir -p $PUBLIC
  98     if [ -e $CONFIG/cert/org.osaaf.aaf.signer.p12 ]; then
  99         cp $CONFIG/cert/org.osaaf.aaf.signer.p12 $FILE
 100         echo "Installed Signer P12"
 101         INITIALIZED="true"
 102     else
 103         echo "Decode"
 104         base64 -d $CONFIG/cert/demoONAPsigner.p12.b64 > $FILE
 105         base64 -d $CONFIG/cert/truststoreONAP.p12.b64 > $PUBLIC/truststoreONAP.p12
 106         base64 -d $CONFIG/cert/truststoreONAPall.jks.b64 > $PUBLIC/truststoreONAPall.jks
 107         ln -s $PUBLIC/truststoreONAPall.jks $LOCAL
 108         cp $CONFIG/cert/AAF_RootCA.cer $PUBLIC
 109         CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
 110         echo "Setup ONAP Test CAs and Signers"
 111         INITIALIZED="true"
 112     fi
 113 fi
 114
 115 FILE="$LOCAL/org.osaaf.aaf.p12"
 116 if [ ! -e $FILE ]; then
 117     if [ -e $CONFIG/cert/org.osaaf.aaf.p12 ]; then
 118         cp $CONFIG/cert/org.osaaf.aaf.p12 $FILE
 119         echo "Installed AAF P12"
 120         INITIALIZED="true"
 121     else
 122         echo "Bootstrap Creation of Keystore from Signer"
 123         cd $CONFIG/CA
 124
 125         # Redo all of this after Dublin
 126         export cadi_x509_issuers="CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US"
 127         export signer_subj="/CN=intermediateCA_9/OU=OSAAF/O=ONAP/C=US"
 128         bash bootstrap.sh $LOCAL/org.osaaf.aaf.signer.p12 'something easy'
 129         cp aaf.bootstrap.p12 $FILE
 130         if [ -n "$CADI_X509_ISSUERS" ]; then
 131             CADI_X509_ISSUERS="$CADI_X509_ISSUERS:"
 132         fi
 133         BOOT_ISSUER="$(cat aaf.bootstrap.issuer)"
 134         CADI_X509_ISSUERS="$CADI_X509_ISSUERS$BOOT_ISSUER"
 135
 136         I=${BOOT_ISSUER##CN=};I=${I%%,*}
 137         CM_CA_PASS="something easy"
 138         CM_CA_LOCAL="org.onap.aaf.auth.cm.ca.LocalCA,$LOCAL/org.osaaf.aaf.signer.p12;aaf_intermediate_9;enc:"
 139         CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
 140         echo "Generated ONAP Test AAF certs"
 141         INITIALIZED="true"
 142     fi
 143 fi
 144
 145 # Only initialize once, automatically...
 146 if [ ! -e $LOCAL/org.osaaf.aaf.props ]; then
 147     cp  $CONFIG/local/org.osaaf.aaf* $LOCAL
 148     for D in public etc logs; do
 149         mkdir -p $OSAAF/$D
 150         cp $CONFIG/$D/* $OSAAF/$D
 151     done
 152
 153     TMP=$(mktemp)
 154     for P in `env`; do
 155       if [[ "$P" == aaf_* ]] || [[ "$P" == cadi_* ]]; then
 156         S="${P/_helm/.helm}"
 157         S="${S/_oom/.oom}"
 158         echo "$S" >> ${TMP}
 159       fi
 160     done
 161     cat $TMP
 162
 163     $JAVA_AGENT config \
 164         aaf@aaf.osaaf.org \
 165         cadi_etc_dir=$LOCAL \
 166         cadi_latitude=${cadi_latitude} \
 167         cadi_longitude=${cadi_longitude} \
 168         cadi_prop_files=$CONFIG/local/initialConfig.props:$CONFIG/local/aaf.props:${TMP}
 169     rm ${TMP}
 170     echo "cm_always_ignore_ips=${cm_always_ignore_ips:=false}" >> $LOCAL/org.osaaf.aaf.props;
 171
 172     # Cassandra Config stuff
 173     # Default is expect a Cassandra on same Node
 174     CASS_HOST=${CASS_HOST:="aaf-cass"}
 175     CASS_PASS=$($JAVA_CADI digest "${CASSANDRA_PASSWORD:-cassandra}" $LOCAL/org.osaaf.aaf.keyfile)
 176     CASS_NAME=${CASS_HOST/:*/}
 177     sed -i.backup -e "s/\\(cassandra.clusters=\\).*/\\1${CASSANDRA_CLUSTER:=$CASS_HOST}/" \
 178                   -e "s/\\(cassandra.clusters.user=\\).*/\\1${CASSANDRA_USER:=cassandra}/" \
 179                   -e "s/\\(cassandra.clusters.password=enc:\\).*/\\1$CASS_PASS/" \
 180                   -e "s/\\(cassandra.clusters.port=\\).*/\\1${CASSANDRA_PORT:=9042}/" \
 181                   $LOCAL/org.osaaf.aaf.cassandra.props
 182
 183     if [ -n "$CM_CA_LOCAL" ]; then
 184       if [ -n "$CM_CA_PASS" ]; then
 185           CM_CA_LOCAL=$CM_CA_LOCAL$($JAVA_CADI digest "$CM_CA_PASS" $LOCAL/org.osaaf.aaf.keyfile)
 186       fi
 187       # Move and copy method, rather than sed, because of slashes in CM_CA_LOCAL makes too complex
 188       FILE=$LOCAL/org.osaaf.aaf.cm.ca.props
 189       mv $FILE $FILE.backup
 190       grep -v "cm_ca.local=" $FILE.backup > $FILE
 191       echo "cm_ca.local=$CM_CA_LOCAL" >> $FILE
 192       echo "cm_trust_cas=$CM_TRUST_CAS" >> $FILE
 193     fi
 194     echo "Created AAF Initial Configurations"
 195     INITIALIZED="true"
 196     if [ -n ${DUSER} ]; then
 197       mkdir -p /opt/app/osaaf/logs
 198       chown -R 1000:1000 /opt/app/aaf /opt/app/osaaf
 199     fi
 200 fi
 201
 202
 203 # Now run a command
 204 CMD=$1
 205 if [ -z "$CMD"  ]; then
 206     if [ -n "$INITIALIZED" ]; then
 207         echo "Initialization Complete"
 208     else
 209         echo "No Additional Initialization required"
 210     fi
 211 else
 212     shift
 213     case "$CMD" in
 214     ls)
 215         echo ls requested
 216         find $OSAAF -depth
 217         ;;
 218     cat)
 219         if [ "$1" = "" ]; then
 220             echo "usage: cat <file... ONLY files ending in .props>"
 221         else
 222             if [[ $1 == *.props ]]; then
 223                 echo
 224                 echo "## CONTENTS OF $3"
 225                 echo
 226                 cat "$1"
 227             else
 228                 echo "### ERROR ####"
 229                 echo "   \"cat\" may only be used with files ending with \".props\""
 230             fi
 231         fi
 232         ;;
 233     validate)
 234         echo "## validate requested"
 235         $JAVA_AAFCLI perm list user aaf@aaf.osaaf.org
 236         ;;
 237     onap)
 238         #echo Initializing ONAP configurations.
 239         ;;
 240     bash)
 241         shift
 242         cd $LOCAL || exit
 243         exec /bin/bash -c "$@"
 244         ;;
 245     setProp)
 246         cd $LOCAL || exit
 247         FILES=$(grep -l "$1" ./*.props)
 248         if [ -z "$FILES" ]; then
 249             if [ -z "$3" ]; then
 250                FILES=org.osaaf.aaf.props
 251             else
 252                FILES="$3"
 253             fi
 254             ADD=Y
 255         fi
 256         for F in $FILES; do
 257             if [ "$ADD" = "Y" ]; then
 258                 echo "Changing $1 for $F"
 259                 echo "$1=$2" >> $F
 260             else
 261                echo "Changing $1 in $F"
 262                sed -i.backup -e "s/\\(${1}=\\).*/\\1${2}/" $F
 263             fi
 264             cat $F
 265         done
 266         ;;
 267     encrypt)
 268         cd $LOCAL || exit
 269         echo $1
 270         FILES=$(grep -l "$1" ./*.props)
 271         if [ "$FILES" = "" ]; then
 272              FILES=$LOCAL/org.osaaf.aaf.cred.props
 273              ADD=Y
 274         fi
 275         for F in $FILES; do
 276             echo "Changing $1 in $F"
 277             if [ "$2" = "" ]; then
 278                 read -r -p "Password (leave blank to cancel): " -s ORIG_PW
 279                 echo " "
 280                 if [ "$ORIG_PW" = "" ]; then
 281                     echo canceling...
 282                     break
 283                 fi
 284             else
 285                 ORIG_PW="$2"
 286             fi
 287             PWD=$($JAVA_CADI digest "$ORIG_PW" $LOCAL/org.osaaf.aaf.keyfile)
 288             if [ "$ADD" = "Y" ]; then
 289                   echo "$1=enc:$PWD" >> $F
 290             else
 291                 sed -i.backup -e "s/\\($1.*enc:\\).*/\\1$PWD/" $F
 292            fi
 293             cat $F
 294         done
 295         ;;
 296     taillog)
 297         sh $OSAAF/logs/taillog
 298         ;;
 299     wait)
 300         bash $CONFIG/bin/pod_wait.sh wait $1
 301         ;;
 302     --help | -?)
 303         case "$1" in
 304         "")
 305             echo "--- Agent Container Comands ---"
 306             echo "  ls                      - Lists all files in Configuration"
 307             echo "  cat <file.props>>       - Shows the contents (Prop files only)"
 308             echo "  validate                - Runs a test using Configuration"
 309             echo "  setProp <tag> [<value>] - set value on 'tag' (if no value, it will be queried from config)"
 310             echo "  encrypt <tag> [<pass>]  - set passwords on Configuration (if no pass, it will be queried)"
 311             echo "  bash                    - run bash in Container"
 312             echo "     Note: the following aliases are preset"
 313             echo "       cadi               - CADI CmdLine tool"
 314             echo "       agent              - Agent Java tool (see above help)"
 315             echo ""
 316             echo " --help|-? [cadi|agent]   - This help, cadi help or agent help"
 317             ;;
 318         cadi)
 319             echo "--- cadi Tool Comands ---"
 320             $JAVA_CADI
 321             ;;
 322         agent)
 323             echo "--- agent Tool Comands ---"
 324             $JAVA_AGENT
 325             ;;
 326         aafcli)
 327             echo "--- aafcli Tool Comands ---"
 328             $JAVA_AAFCLI
 329             ;;
 330         esac
 331         echo ""
 332         ;;
 333     *)
 334         $JAVA_AGENT "$CMD" "$@" cadi_prop_files=$LOCAL/org.osaaf.aaf.props
 335         ;;
 336     esac
 337 fi