.. Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
-#################
+.. _aai-label:
+
+##########
A&AI Actor
-#################
+##########
.. contents::
:depth: 3
Overview of A&AI Actor
-#############################
+######################
+ONAP Policy Framework enables various actors, several of which require additional
+data to be gathered from A&AI via a REST call. Previously, the request was built,
+and the REST call made, by the application. However, A&AI queries have now been
+implemented using the new Actor framework.
+
+Each operation supported by the actor is associated with its own java class, which is
+responsible for populating the request structure and invoking the REST service. The
+class hierarchy is shown below.
+
+.. image:: classHierarchy.png
+
+Currently, the following operations are supported:
+
+- Tenant
+- Pnf
+- CustomQuery
+
+One thing that sets the A&AI Actor implementation apart from the other Actor
+implementations is that it is typically used to gather data for input to the
+other actors. Consequently, when an A&AI operation completes, it places its
+response into the *properties* field of the *context*, which is passed via the
+*ControlLoopOperationParams*. The names of the keys within the *properties*
+field are typically of the form, "AAI.<operation>.<targetEntity>", where
+"operation" is the name of the operation, and "targetEntity" is the *targetEntity*
+passed via the *ControlLoopOperationParams*. For example, the response for
+the Tenant query for a target entity named "ozVserver" would be stored as a
+*properties* named "AAI.Tenant.ozVserver".
+
+On the other hand, as there is only one "custom query" for a given ONSET, the
+*Custom Query* operation deviates from this, in that it always stores its response
+using the key, "AAI.AaiCqResponse".
+
+
+Request
+#######
+
+Most of the the A&AI operations use "GET" requests and thus do not populate
+a request structure. However, for those that do, the request structure is
+described in the table below.
+
+Note: the Custom Query Operation requires tenant data, thus it performs a *Tenant*
+operation before sending its request. The tenant data is gathered for the vserver
+whose name is found in the "vserver.vserver-name" field of the enrichment data provided
+by DCAE with the ONSET event.
+
++----------------------------------+---------+----------------------------------------------------------------------+
+| Field Name | Type | Description |
++----------------------------------+---------+----------------------------------------------------------------------+
++----------------------------------+---------+----------------------------------------------------------------------+
+| Custom Query: | | |
++----------------------------------+---------+----------------------------------------------------------------------+
+| *start* | string | Extracted from the *result-data[0].resource-link* field of the |
+| | | Tenant query response. |
++----------------------------------+---------+----------------------------------------------------------------------+
+
+
+Examples
+########
+
+Suppose the *ControlLoopOperationParams* were populated as follows, with the tenant
+query having already been performed:
+
+.. code-block:: bash
+
+ {
+ "actor": "AAI",
+ "operation": "CustomQuery",
+ "context": {
+ "enrichment": {
+ "vserver.vserver-name": "Ete_vFWCLvFWSNK_7ba1fbde_0"
+ },
+ "properties": {
+ "AAI.Tenant.Ete_vFWCLvFWSNK_7ba1fbde_0": {
+ "result-data": [
+ {
+ "resource-type": "vserver",
+ "resource-link": "/aai/v15/cloud-infrastructure/cloud-regions/cloud-region/CloudOwner/RegionOne/tenants/tenant/3f2aaef74ecb4b19b35e26d0849fe9a2/vservers/vserver/6c3b3714-e36c-45af-9f16-7d3a73d99497"
+ }
+ ]
+ }
+ }
+ }
+ }
+
+An example of a Custom Query request constructed by the actor using the above
+parameters, sent to the A&AI REST server:
+
+.. code-block:: bash
+
+ {
+ "start": "/aai/v15/cloud-infrastructure/cloud-regions/cloud-region/CloudOwner/RegionOne/tenants/tenant/3f2aaef74ecb4b19b35e26d0849fe9a2/vservers/vserver/6c3b3714-e36c-45af-9f16-7d3a73d99497",
+ "query": "query/closed-loop"
+ }
+
+
+An example response received from the A&AI REST service:
+
+.. code-block:: bash
+
+ {
+ "results": [
+ {
+ "vserver": {
+ "vserver-id": "f953c499-4b1e-426b-8c6d-e9e9f1fc730f",
+ "vserver-name": "Ete_vFWCLvFWSNK_7ba1fbde_0",
+ "vserver-name2": "Ete_vFWCLvFWSNK_7ba1fbde_0",
+ "prov-status": "ACTIVE",
+ "vserver-selflink": "http://10.12.25.2:8774/v2.1/41d6d38489bd40b09ea8a6b6b852dcbd/servers/f953c499-4b1e-426b-8c6d-e9e9f1fc730f",
+ "in-maint": false,
+ "is-closed-loop-disabled": false,
+ ...
+ }
+
+
+Configuration of the A&AI Actor
+###############################
+
+The following table specifies the fields that should be provided to configure the A&AI
+actor.
+
+=============================== ==================== ==================================================================
+Field name type Description
+=============================== ==================== ==================================================================
+clientName string Name of the HTTP client to use to send the request to the
+ A&AI REST server.
+timeoutSec integer (optional) Maximum time, in seconds, to wait for a response to be received
+ from the REST server. Defaults to 90s.
+path string URI appended to the URL. This field only applies to individual
+ operations; it does not apply at the actor level. Note: the
+ *path* should not include a leading or trailing slash.
+=============================== ==================== ==================================================================
-This is a place-holder for the actor documentation.
+The individual operations are configured using these same field names. However, all
+of them, except the *path*, are optional, as they inherit their values from the
+corresponding actor-level fields.
.. Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
-#################
+.. _sdnr-label:
+
+##########
SDNR Actor
-#################
+##########
.. contents::
:depth: 3
Overview of SDNR Actor
-#############################
+######################
+ONAP Policy Framework enables SDNR as one of the supported actors. SDNR uses two
+DMaaP topics, one to which requests are published, and another from which responses
+are received. SDNR may generate more than one response for a particular request,
+the first response simply indicating that the request was accepted, while the second
+response indicates completion of the request. For each request, a unique sub-request
+ID is generated. This is used to match the received responses with the published
+requests.
+
+When an SDNR request completes, whether successfully or unsuccessfully, the actor
+populates the *controlLoopResponse* within the *OperationOutcome*. The application
+will typically publish this to a notification topic so that downstream systems can
+take appropriate action.
+
+All SDNR operations are currently supported by a single java class,
+*SdnrOperation*, which is responsible for populating the request structure
+appropriately. This class is derived from *BidirectionalTopicOperation*.
+
+
+Request
+#######
+
+CommonHeader
+************
+
+The "CommonHeader" field in the request is built by policy.
+
+=============================== =========== ==================================================================
+ "CommonHeader" field name type Description
+=============================== =========== ==================================================================
+SubRequestID string Generated by Policy. Is a UUID and used internally by policy
+ to match the response with the request.
+RequestID string Inserted by Policy. Maps to the UUID sent by DCAE i.e. the ID
+ used throughout the closed loop lifecycle to identify a request.
+=============================== =========== ==================================================================
+
+
+Action
+******
+
+The "action" field uniquely identifies the operation to perform. Operation names are
+not validated. Instead, they are passed to SDNR, untouched.
+
+
+RPC Name
+********
+
+The "rpc-name" field is the same as the "action" field, with everything mapped to lower
+case.
+
+
+Payload
+*******
+
+The "payload" field is populated with the *payload* text that is provided within the
+ONSET event; no additional transformation is applied.
+
+
+Examples
+########
+
+Suppose the *ControlLoopOperationParams* were populated as follows:
+
+.. code-block:: bash
+
+ {
+ "actor": "SDNR",
+ "operation": "ModifyConfig",
+ "context": {
+ "event": {
+ "requestId": "664be3d2-6c12-4f4b-a3e7-c349acced200",
+ "payload": "some text"
+ }
+ }
+ }
+
+An example of a request constructed by the actor using the above parameters, published
+to the SDNR request topic:
+
+.. code-block:: bash
+
+ {
+ "body": {
+ "input": {
+ "CommonHeader": {
+ "TimeStamp": "2020-05-18T14:43:58.550499700Z",
+ "APIVer": "1.0",
+ "RequestID": "664be3d2-6c12-4f4b-a3e7-c349acced200",
+ "SubRequestID": "848bfd15-b189-43a1-bdea-80982b41fa24",
+ "RequestTrack": {},
+ "Flags": {}
+ },
+ "Action": "ModifyConfig",
+ "Payload": "some text"
+ }
+ },
+ "version": "1.0",
+ "rpc-name": "modifyconfig",
+ "correlation-id": "664be3d2-6c12-4f4b-a3e7-c349acced200-848bfd15-b189-43a1-bdea-80982b41fa24",
+ "type": "request"
+ }
+
+
+An example initial response received from the SDNR response topic:
+
+.. code-block:: bash
+
+ {
+ "body": {
+ "output": {
+ "CommonHeader": {
+ "TimeStamp": "2020-05-18T14:44:10.000Z",
+ "APIver": "1.0",
+ "RequestID": "664be3d2-6c12-4f4b-a3e7-c349acced200",
+ "SubRequestID": "848bfd15-b189-43a1-bdea-80982b41fa24",
+ "RequestTrack": [],
+ "Flags": []
+ },
+ "Status": {
+ "Code": 100,
+ "Value": "ACCEPTED"
+ }
+ }
+ },
+ "version": "1.0",
+ "rpc-name": "modifyconfig",
+ "correlation-id": "664be3d2-6c12-4f4b-a3e7-c349acced200-848bfd15-b189-43a1-bdea-80982b41fa24",
+ "type": "response"
+ }
+
+
+An example final response received from the SDNR on the same response topic:
+
+.. code-block:: bash
+
+ {
+ "body": {
+ "output": {
+ "CommonHeader": {
+ "TimeStamp": "2020-05-18T14:44:20.000Z",
+ "APIver": "1.0",
+ "RequestID": "664be3d2-6c12-4f4b-a3e7-c349acced200",
+ "SubRequestID": "848bfd15-b189-43a1-bdea-80982b41fa24",
+ "RequestTrack": [],
+ "Flags": []
+ },
+ "Status": {
+ "Code": 200,
+ "Value": "SUCCESS"
+ },
+ "Payload": "{ \"Configurations\":[ { \"Status\": { \"Code\": 200, \"Value\": \"SUCCESS\" }, \"data\":{\"FAPService\":{\"alias\":\"Chn0330\",\"X0005b9Lte\":{\"phyCellIdInUse\":6,\"pnfName\":\"ncserver23\"},\"CellConfig\":{\"LTE\":{\"RAN\":{\"Common\":{\"CellIdentity\":\"Chn0330\"}}}}}} } ] }"
+ }
+ },
+ "version": "1.0",
+ "rpc-name": "modifyconfig",
+ "correlation-id": "664be3d2-6c12-4f4b-a3e7-c349acced200-848bfd15-b189-43a1-bdea-80982b41fa24",
+ "type": "response"
+ }
+
+
+Configuration of the SDNR Actor
+###############################
+
+The following table specifies the fields that should be provided to configure the SNDR
+actor.
+
+=============================== ==================== ==================================================================
+Field name type Description
+=============================== ==================== ==================================================================
+sinkTopic string Name of the topic to which the request should be published.
+sourceTopic string Name of the topic from which the response should be read.
+ This must not be the same as the *sinkTopic*.
+timeoutSec integer (optional) Maximum time, in seconds, to wait for a response to be received
+ on the topic.
+=============================== ==================== ==================================================================
-This is a place-holder for the actor documentation.
+The individual operations are configured using these same field names. However, all
+of them are optional, as they inherit their values from the corresponding actor-level
+fields.
.. image:: images/distribution-summary-report.png
.. image:: images/distribution-results-tree.png
+
+Performance Test of Policy Distribution
++++++++++++++++++++++++++++++++++++++++
+
+Introduction
+------------
+
+Performance test of distribution has the goal of testing the min/avg/max processing time and
+rest call throughput for all the requests when the number of requests are large enough to saturate
+the resource and find the bottleneck.
+It also tests that distribution can handle multiple policy csar's and that these are deployed within 30 seconds consistently.
+
+Setup Details
+-------------
+
+The performance test is based on the same setup as the distribution stability tests.
+
+Test Plan
+---------
+
+Performance test plan is different from the stability test plan.
+Instead of handling one policy csar at a time, multiple csar's are deployed within the watched folder at the exact same time.
+We then expect all policies from these csar's to be deployed within 30 seconds.
+Alongside these, there are multithreaded tests running towards the healtchcheck and statistics endpoints of the distribution service.
+
+Run Test
+--------
+
+Copy the performance test plans folder onto VM2.
+Edit the /tmp/ folder permissions to allow the Testplan to insert the CSAR into the /tmp/policydistribution/distributionmount/ folder.
+
+.. code-block:: bash
+
+ $ sudo chmod a+trwx /tmp
+
+From the apache jMeter folder run the test, pointing it towards the stabiltiy.jmx file inside the testplans folder
+
+.. code-block:: bash
+
+ $ ./bin/jmeter -n -t /home/rossc/testplans/performance.jmx -Jduration=259200 -l testresults.jtl
+
+Test Results
+------------
+
+**Summary**
+
+Performance test plan was triggered for 4 hours.
+
+**Test Statistics**
+
+======================= ================= ================== ==================================
+**Total # of requests** **Success %** **Error %** **Average time taken per request**
+======================= ================= ================== ==================================
+239819 100 % 0 % 100 ms
+======================= ================= ================== ==================================
+
+**JMeter Screenshot**
+
+.. image:: images/distribution-performance-summary-report.png
+.. image:: images/distribution-performance-api-report.png
Code Review / policy / parent.git / commitdiff
