--- /dev/null
+.. This work is licensed under a
+.. Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+.. _distribution-s3p-label:
+
+Policy Distribution component
+#############################
+
+72 Hours Stability Test of Distribution
++++++++++++++++++++++++++++++++++++++++
+
+Introduction
+------------
+The 72 hour Stability Test for policy distribution has the goal of introducing a steady flow of transactions initiated from a test client server running JMeter. The policy distribution is configured with a special FileSystemReception plugin to monitor a local directory for newly added csar files to be processed by itself. The input CSAR will be added/removed by the test client(JMeter) and the result will be pulled from the backend(PAP and PolicyAPI) by the test client(JMeter).
+
+
+The test will be performed in an environment where Jmeter will continuously add/remove a test csar into the special directory where policy distribuion is monitoring and will then get the processed results from PAP and PolicyAPI to verify the successful deployment of the policy. The policy will then be undeployed and the test will loop continuously until 72 hours have elapsed.
+
+Setup details
+-------------
+
+The stability test is performed on VM's running in the OpenStack cloud environment in the ONAP integration lab. There are 2 separate VMs, one for running backend policy services which policy distribution needs, and the other is for policy distribution service itself and Jmeter.
+
+**OpenStack environment details**
+
+Version: Windriver Titanium
+
+**Policy Backend VM details(VM1)**
+
+OS:Ubuntu 18.04.4 LTS
+
+CPU: 8 core
+
+RAM: 32 GB
+
+HardDisk: 160 GB
+
+Docker version 19.03.8, build afacb8b7f0
+
+Java: openjdk version "11.0.7"
+
+**JMeter and Distribution VM details(VM2)**
+
+OS: Ubuntu 18.04.4 LTS
+
+CPU: 8 core
+
+RAM: 32 GB
+
+HardDisk: 160 GB
+
+Docker version 19.03.8, build afacb8b7f0
+
+Java: openjdk version "11.0.7"
+
+JMeter: 5.1.1
+
+Install Docker in VM1 & VM2
+---------------------------
+Make sure to execute below commands in VM1 & VM2 both.
+
+Update the ubuntu software installer
+
+.. code-block:: bash
+
+ $ apt-get update
+
+Install and check Java
+
+.. code-block:: bash
+
+ $ apt-get install -y openjdk-11-jdk
+ $ java -version
+
+Ensure that the Java version that is executing is OpenJDK version 11
+
+Install and check Docker
+
+.. code-block:: bash
+
+ $ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add - add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
+ $ apt-get update
+ $ apt-cache policy docker-ce
+ $ apt-get install -y docker-ce
+ $ systemctl status docker
+ $ docker ps
+
+Change the permissions of the Docker socket file
+
+.. code-block:: bash
+
+ $ sudo chmod 666 /var/run/docker.sock
+
+Check the status of the Docker service and ensure it is running correctly
+
+.. code-block:: bash
+
+ $ service docker status
+ $ docker ps
+
+Install Simulators, PAP, PolicyAPI and MariaDB in VM1
+-----------------------------------------------------
+
+To install all the components needed for Distribution, copy over the script and related files found within the simulatorsetup directory within $(REPOPATH)/distribution/testsuites/stability/src/main/resources
+
+Run setup_components.sh script to bring up the required docker containers
+
+After installation, ensure the following docker containers are up and running:
+
+.. code-block:: bash
+
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ 11195b01300a nexus3.onap.org:10001/onap/policy-pap:2.2.2-SNAPSHOT "bash ./policy-pap.sh" 13 seconds ago Up 9 seconds 0.0.0.0:7000->6969/tcp policy-pap
+ 6266aa6b0137 nexus3.onap.org:10001/onap/policy-api:2.2.3-SNAPSHOT "bash ./policy-api.sh" 25 seconds ago Up 22 seconds 0.0.0.0:6969->6969/tcp policy-api
+ 6a85d155aa8a pdp/simulator:latest "bash pdp-sim.sh" About a minute ago Up About a minute pdp-simulator
+ 0b41992ccfd7 dmaap/simulator:latest "bash dmaap-sim.sh" About a minute ago Up About a minute 0.0.0.0:3904->3904/tcp message-router
+ 595056b2a094 mariadb:10.2.14 "docker-entrypoint.s…" About a minute ago Up About a minute 0.0.0.0:3306->3306/tcp mariadb
+
+Install Distribution in VM2
+---------------------------
+
+To install the Distribution service, copy over the script and related files found within the distributionsetup directory within $(REPOPATH)/distribution/testsuites/stability/src/main/resources
+
+Run setup_distribution.sh script to install the distribution service, provide the IP of VM1 as the arguments to the script.
+
+e.g
+.. code-block:: bash
+
+ $ ./setup_distribution.sh 10.2.0.24 10.2.0.24
+
+Ensure the distribution container is running.
+
+Install JMeter in VM2
+---------------------
+
+Download and install jMeter
+
+.. code-block:: bash
+
+ $ mkdir jMeter
+ $ cd jMeter
+ $ wget https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.1.1.zip
+ $ unzip apache-jmeter-5.1.1.zip
+
+Install & configure visualVM in VM2
+-----------------------------------
+VisualVM needs to be installed in the virtual machine running Distrbution. It will be used to monitor CPU, Memory and GC for Distribution while the stability tests are running.
+
+.. code-block:: bash
+
+ $ sudo apt-get install visualVM
+
+Run these commands to configure permissions
+
+.. code-block:: bash
+
+ $ cd /usr/lib/jvm/java-11-openjdk-amd64/bin/
+ $ sudo touch visualvm.policy
+ $ sudo chmod 777 visualvm.policy
+
+ $ vi visualvm.policy
+
+ Add the following in visualvm.policy
+
+ grant codebase "file:/usr/lib/jvm/java-11-openjdk-amd64/lib/tools.jar" {
+ permission java.security.AllPermission;
+ };
+
+Run the following commands to start jstatd using port 1111
+
+.. code-block:: bash
+
+ $ cd /usr/lib/jvm/java-8-openjdk-amd64/bin/
+ $ ./jstatd -p 1111 -J-Djava.security.policy=visualvm.policy &
+
+Using the VM2 Desktop, run visualVM to connect to localhost:9090
+Run the command
+
+.. code-block:: bash
+
+ $ visualvm
+
+This will load up the visualVM GUI
+
+Connect to Distribution JMX Port.
+
+ 1. Right click on "Local" in the left panel of the screen and select "Add JMX Connection"
+ 2. Enter the Port 9090. this is the JMX port exposed by the dsitribution container
+ 3. Double click on the newly added nodes under "Local" to start monitoring CPU, Memory & GC.
+
+Example Screenshot
+
+Sample Screenshot of visualVM
+
+.. image:: images/distribution-s3p-vvm-sample.png
+
+Test Plan Setup
+---------------
+
+The 72 hours stability test will run the following steps sequentially in a single threaded loop.
+
+- **Delete Old CSAR** - Checks if CSAR already exists in the watched directory, if so it deletes it
+- **Add CSAR** - Adds CSAR to the directory that distribution is watching
+- **Get Healthcheck** - Ensures Healthcheck is returning 200 OK
+- **Get Statistics** - Ensures Statistics is returning 200 OK
+- **CheckPDPGroupQuery** - Checks that PDPGroupQuery contains the deployed policy
+- **CheckPolicyDeployed** - Checks that the policy is deployed
+- **Undeploy Policy** - Undeploys the policy
+- **Delete Policy** - Deletes the Policy for the next loop
+- **Check PDP Group for Deletion** - Ensures the policy has been removed and does not exist
+
+The following steps can be used to configure the parameters of the test plan.
+
+- **HTTP Authorization Manager** - used to store user/password authentication details.
+- **HTTP Header Manager** - used to store headers which will be used for making HTTP requests.
+- **User Defined Variables** - used to store following user defined parameters.
+
+========== ===============================================
+ **Name** **Description**
+========== ===============================================
+ PAP_HOST IP Address or host name of PAP component
+ PAP_PORT Port number of PAP for making REST API calls
+ API_HOST IP Address or host name of API component
+ API_PORT Port number of API for making REST API calls
+ DURATION Duration of Test
+========== ===============================================
+
+Screenshot of Distribution stability test plan
+
+.. image:: images/distribution-s3p-testplan.png
+
+Running the Test Plan
+---------------------
+
+Copy the Test Plans folder onto VM2
+Edit the /tmp/ folder permissions to allow the Testplan to insert the CSAR into the /tmp/policydistribution/distributionmount/ folder
+
+.. code-block:: bash
+
+ $ sudo chmod a+trwx /tmp
+
+From the apache jMeter folder run the test, pointing it towards the stabiltiy.jmx file inside the testplans folder
+
+.. code-block:: bash
+
+ $ ./bin/jmeter -n -t /home/rossc/testplans/stability.jmx -Jduration=259200 -l testresults.jtl
+
+Test Results
+------------
+
+**Summary**
+
+Stability test plan was triggered for 72 hours.
+
+**Test Statistics**
+
+======================= ================= ================== ==================================
+**Total # of requests** **Success %** **Error %** **Average time taken per request**
+======================= ================= ================== ==================================
+194313 100 % 0 % 145 ms
+======================= ================= ================== ==================================
+
+**VisualVM Screenshot**
+
+.. image:: images/distribution-vvm-monitor.png
+.. image:: images/distribution-vvm-threads.png
+
+**JMeter Screenshot**
+
+.. image:: images/distribution-summary-report.png
+.. image:: images/distribution-results-tree.png
Code Review / policy / parent.git / commitdiff
