Some remaining warnings in the documentaiton build ar fixed.
Issue-ID: POLICY-3710
Change-Id: I4d41c3db48d4384cd03f4e9205cf0dcad6f684d4
Signed-off-by: liamfallon <liam.fallon@est.tech>
.. image:: ../../images/participants/k8s-participant.png
Defining a TOSCA CL definition for kubernetes participant:
--------------------------------------------------------
+----------------------------------------------------------
+
A *chart* parameter map describes the helm chart parameters in tosca template for a microservice that is used by the kubernetes participant for the deployment.
A Control Loop element in TOSCA is mapped to the kubernetes participant and also holds the helm chart parameters for a microservice defined under the properties of the Control Loop Element.
Policy Type and Policy References
+++++++++++++++++++++++++++++++++
-The Policy Framework uses the policyType and policyId properties defined in the Policy Control Loop Element type references to specify what policy type and policy should be used by a Policy Control Loop Element.
+The Policy Framework uses the policyType and policyId properties defined in the Policy Control Loop Element type references to specify what policy type and policy should be used by a Policy Control Loop Element.
The Policy Type and Policy specified in the policyType and policyId reference must of course be available in the Policy Framework in order for them to be used in Control Loop instances. In some cases, the Policy Type and/or the Policy may be already loaded in the Policy Framework. In other cases, the Policy Framework participant must load the Policy Type and/or policy.
The Policy Participant uses the following steps for Policy Type References:
- 1. The Policy Participant reads the Policy Type ID from the policyType property specified for the Control Loop Element
- 2. It checks if a Policy Type with that Policy Type ID has been specified in the ToscaServiceTemplateFragment field in the ControLoopElement definition in the
- ControlLoopUpdate message, see The CLAMP Control Loop Participant Protocol#Messages.
- a. If the Policy Type has been specified, the Participant stores the Policy Type in the Policy framework. If the Policy Type is successfully stored, execution proceeds, otherwise an error is reported
- b. If the Policy Type has not been specified, the Participant checks that the Policy Type is already in the Policy framework. If the Policy Type already exists, execution proceeds, otherwise an error is reported
+#. The Policy Participant reads the Policy Type ID from the policyType property specified for the Control Loop Element.
+
+#. It checks if a Policy Type with that Policy Type ID has been specified in the ToscaServiceTemplateFragment field in
+ the ControLoopElement definition in the ControlLoopUpdate message, see :ref:`controlloop-participant-protocol-label`.
+
+ #. If the Policy Type has been specified, the Participant stores the Policy Type in the Policy framework. If the
+ Policy Type is successfully stored, execution proceeds, otherwise an error is reported.
+
+ #. If the Policy Type has not been specified, the Participant checks that the Policy Type is already in the Policy
+ framework. If the Policy Type already exists, execution proceeds, otherwise an error is reported.
Policy References
*****************
The Policy Participant uses the following steps for Policy References:
- 1. The Policy Participant reads the Policy ID from the policyId property specified for the Control Loop Element
- 2. It checks if a Policy with that Policy ID has been specified in the ToscaServiceTemplateFragment field in the ControLoopElement definition in the
- ControlLoopUpdate message, see The CLAMP Control Loop Participant Protocol#Messages.
- a. If the Policy has been specified, the Participant stores the Policy in the Policy framework. If the Policy is successfully stored, execution proceeds, otherwise an error is reported
- b. If the Policy has not been specified, the Participant checks that the Policy is already in the Policy framework. If the Policy already exists, execution proceeds, otherwise an error is reported
\ No newline at end of file
+#. The Policy Participant reads the Policy ID from the policyId property specified for the Control Loop Element.
+
+#. It checks if a Policy with that Policy ID has been specified in the ToscaServiceTemplateFragment field in the
+ ControLoopElement definition in the ControlLoopUpdate message, :ref:`controlloop-participant-protocol-label`.
+
+ #. If the Policy has been specified, the Participant stores the Policy in the Policy framework. If the Policy is
+ successfully stored, execution proceeds, otherwise an error is reported.
+
+ #. If the Policy has not been specified, the Participant checks that the Policy is already in the Policy framework. If
+ the Policy already exists, execution proceeds, otherwise an error is reported.
\ No newline at end of file
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. _clamp-gui-controlloop-smoke-tests:
+.. _clamp-participant-protocol-smoke-tests:
+
CLAMP Participant Protocol Smoke Tests
----------------------------
+--------------------------------------
+
1. Introduction
***************
+
The CLAMP Control Loop Participant protocol is an asynchronous protocol that is used by the CLAMP runtime
to coordinate life cycle management of Control Loop instances.
This document will serve as a guide to do smoke tests on the different usecases that are involved when
2. Setup Guide
**************
-This section will show the developer how to set up their environment to start testing participants with some instruction on how to carry out the tests. There are a number of prerequisites. Note that this guide is written by a Linux user - although the majority of the steps show will be exactly the same in Windows or other systems.
+
+This section will show the developer how to set up their environment to start testing participants with some
+instructions on how to carry out the tests. There are a number of prerequisites. Note that this guide is written by a
+Linux user - although the majority of the steps show will be exactly the same in Windows or other systems.
2.1 Prerequisites
=================
+
- Java 11
- Docker
- Maven 3
2.2 Setting up the components
=============================
+
- Controlloop runtime component docker image is started and running.
- Participant docker images policy-clamp-cl-pf-ppnt, policy-clamp-cl-http-ppnt, policy-clamp-cl-k8s-ppnt are started and running.
- Dmaap simulator for communication between components.
- mariadb docker container for policy and controlloop database.
- policy-api for communication between policy participant and policy-framework
-In this setup guide, we will be setting up all the components technically required for a working convenient dev environment. We will not be setting up all of the participants - we will setup only the policy participant as an example.
+
+In this setup guide, we will be setting up all the components technically required for a working convenient
+dev environment. We will not be setting up all of the participants - we will setup only the policy participant as an
+example.
2.2.1 MariaDB Setup
===================
+
We will be using Docker to run our mariadb instance. It will have a total of two databases running in it.
+
- controlloop: the runtime-controlloop db
- policyadmin: the policy-api db
3. Running Tests of protocol dialogues
**************************************
-lloop type definitions and common property values for participant types
+
+loop type definitions and common property values for participant types.
+
In this section, we will run through the functionalities mentioned at the start of this document is section 1. Each functionality will be tested and we will confirm that they were carried out successfully. There is a tosca service template that can be used for this test
:download:`Tosca Service Template <tosca/tosca-for-gui-smoke-tests.yaml>`
3.1 Participant Registration
============================
+
Action: Bring up the participant
+
Test result:
+
- Observe PARTICIPANT_REGISTER going from participant to runtime
- Observe PARTICIPANT_REGISTER_ACK going from runtime to participant
- Observe PARTICIPANT_UPDATE going from runtime to participant
3.2 Participant Deregistration
==============================
+
Action: Bring down the participant
Test result:
+
- Observe PARTICIPANT_DEREGISTER going from participant to runtime
- Observe PARTICIPANT_DEREGISTER_ACK going from runtime to participant
3.3 Participant Priming
=======================
+
When a control loop is primed, the portion of the Control Loop Type Definition and Common Property values for the participants
of each participant type mentioned in the Control Loop Definition are sent to the participants.
Action: Invoke a REST API to prime controlloop type definitions and set values of common properties
+
Test result:
+
- Observe PARTICIPANT_UPDATE going from runtime to participant with controlloop type definitions and common property values for participant types
- Observe that the controlloop type definitions and common property values for participant types are stored on ParticipantHandler
- Observe PARTICIPANT_UPDATE_ACK going from runtime to participant
3.4 Participant DePriming
=========================
+
When a control loop is de-primed, the portion of the Control Loop Type Definition and Common Property values for the participants
of each participant type mentioned in the Control Loop Definition are deleted on participants.
Action: Invoke a REST API to deprime controlloop type definitions
+
Test result:
+
- If controlloop instances exist in runtime database, return a response for the REST API with error response saying "Cannot decommission controlloop type definition"
- If no controlloop instances exist in runtime database, Observe PARTICIPANT_UPDATE going from runtime to participant with definitions as null
- Observe that the controlloop type definitions and common property values for participant types are removed on ParticipantHandler
3.5 Control Loop Update
=======================
+
Control Loop Update handles creation, change, and deletion of control loops on participants.
Action: Trigger controlloop instantiation from GUI
+
Test result:
+
- Observe CONTROL_LOOP_UPDATE going from runtime to participant
- Observe that the controlloop type instances and respective property values for participant types are stored on ControlLoopHandler
- Observe that the controlloop state is UNINITIALISED
3.6 Control Loop state change to PASSIVE
========================================
+
Control Loop Update handles creation, change, and deletion of control loops on participants.
Action: Change state of the controlloop to PASSIVE
+
Test result:
+
- Observe CONTROL_LOOP_STATE_CHANGE going from runtime to participant
- Observe that the ControlLoopElements state is PASSIVE
- Observe that the controlloop state is PASSIVE
3.7 Control Loop state change to RUNNING
========================================
+
Control Loop Update handles creation, change, and deletion of control loops on participants.
Action: Change state of the controlloop to RUNNING
+
Test result:
+
- Observe CONTROL_LOOP_STATE_CHANGE going from runtime to participant
- Observe that the ControlLoopElements state is RUNNING
- Observe that the controlloop state is RUNNING
3.8 Control Loop state change to PASSIVE
========================================
+
Control Loop Update handles creation, change, and deletion of control loops on participants.
Action: Change state of the controlloop to PASSIVE
+
Test result:
+
- Observe CONTROL_LOOP_STATE_CHANGE going from runtime to participant
- Observe that the ControlLoopElements state is PASSIVE
- Observe that the controlloop state is PASSIVE
3.9 Control Loop state change to UNINITIALISED
==============================================
+
Control Loop Update handles creation, change, and deletion of control loops on participants.
Action: Change state of the controlloop to UNINITIALISED
+
Test result:
+
- Observe CONTROL_LOOP_STATE_CHANGE going from runtime to participant
- Observe that the ControlLoopElements state is UNINITIALISED
- Observe that the controlloop state is UNINITIALISED
3.10 Control Loop monitoring and reporting
==========================================
+
This dialogue is used as a heartbeat mechanism for participants, to monitor the status of Control Loop Elements, and to gather statistics on control loops. The ParticipantStatus message is sent periodically by each participant. The reporting interval for sending the message is configurable
Action: Bring up participant
+
Test result:
+
- Observe that PARTICIPANT_STATUS message is sent from participants to runtime in a regular interval
- Trigger a PARTICIPANT_STATUS_REQ from runtime and observe a PARTICIPANT_STATUS message with tosca definitions of control loop type definitions sent
-from all the participants to runtime
+ from all the participants to runtime
This concluded the required smoke tests
.. Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
-.. _policy-development-tools-label:
+.. _policy-clamp-runtime-smoke-label:
CLAMP control loop runtime Smoke Tests
######################################
policy/xacml-pdp \
policy/distribution \
policy/gui \
- policy/engine "
+ policy/clamp "
##
## Help screen and exit condition (i.e. too few arguments)
* ~/git/onap/policy/docker
* ~/git/onap/policy/drools-applications
* ~/git/onap/policy/drools-pdp
- * ~/git/onap/policy/engine
+ * ~/git/onap/policy/clamp
* ~/git/onap/policy/apex-pdp
* ~/git/onap/policy/xacml-pdp
* ~/git/onap/policy/distribution
<module>drools-applications</module>
<module>distribution</module>
<module>gui</module>
- <!-- The engine repo is being deprecated,
- and can be ommitted if not working with
- legacy api and components. -->
- <module>engine</module>
+ <module>clamp</module>
</modules>
</project>
:maxdepth: 1
policy-gui-controlloop-smoke.rst
-
- policy-participant-smoke.rst
-
db-migrator-smoke.rst
-
cl-participants-smoke.rst
+ clamp-smoke.rst
+ clamp-cl-participant-protocol-smoke.rst
+ policy-participant-smoke.rst
+
..
api-smoke.rst
..
distribution-smoke.rst
-..
- clamp-smoke.rst
-
-..
- clamp-cl-participant-protocol-smoke.rst
Running the Stability/Performance Tests
***************************************
CLAMP Policy Participant Smoke Tests
------------------------------------
+
1. Introduction
***************
+
The Smoke testing of the policy participant is executed in a local CLAMP/Policy environment. The CLAMP-Controlloop interfaces interact with the Policy Framework to perform actions based on the state of the policy participant. The goal of the Smoke tests is the ensure that CLAMP Policy Participant and Policy Framework work together as expected.
2. Setup Guide
**************
+
This section will show the developer how to set up their environment to start testing in GUI with some instruction on how to carry out the tests. There are a number of prerequisites. Note that this guide is written by a Linux user - although the majority of the steps show will be exactly the same in Windows or other systems.
2.1 Prerequisites
=================
+
- Java 11
- Maven 3
- Git
- policy/docker
- policy/gui
- policy/api
+
In this setup guide, we will be setting up all the components technically required for a working convenient dev environment.
2.3 Setting up the components
2.3.2 DMAAP Simulator
^^^^^^^^^^^^^^^^^^^^^
+
For convenience, a dmaap simulator has been provided in the policy/models repository. To start the simulator, you can do the following:
1. Navigate to /models-sim/policy-models-simulators in the policy/models repository.
2. Add a configuration file to src/test/resources with the following contents:
2.3.3 Policy API
^^^^^^^^^^^^^^^^
+
In the policy-api repo, you should find the file "src/main/resources/etc/defaultConfig.json". This file must be altered slightly - as below with the restServerParameters and databaseProviderParameters shown. Note how the database parameters match-up with what you setup in Mariadb:
.. code-block:: json
2.3.4 Policy PAP
^^^^^^^^^^^^^^^^
+
In the policy-pap repo, you should find the file 'main/src/test/resources/parameters/PapConfigParameters.json'. This file may need to be altered slightly as below:
.. code-block:: json
2.3.5 Controlloop Runtime
^^^^^^^^^^^^^^^^^^^^^^^^^
+
To start the controlloop runtime we need to go the "runtime-controlloop" directory in the clamp repo. There is a config file that is used, by default, for the controlloop runtime. That config file is here: "src/main/resources/application.yaml". For development in your local environment, it shouldn't need any adjustment and we can just run the controlloop runtime with:
.. code-block:: bash
2.3.6 Controlloop Policy Participant
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
To start the policy participant we need to go to the "participant-impl/participant-impl-policy" directory in the clamp repo. There is a config file under "src/main/resources/config/application.yaml". For development in your local environment, we will need to adjust this file slightly:
.. code-block:: yaml
3.1 Testing Outline
^^^^^^^^^^^^^^^^^^^
+
To perform the Smoke testing of the policy-participant we will be verifying the behaviours of the participant when the control loop changes state. The scenarios are:
- UNINITIALISED to PASSIVE: participant creates policies and policyTypes specified in the ToscaServiceTemplate using policy-api
Creation of Controlloop:
************************
+
A Control Loop is created by commissioning a Tosca template with Control loop definitions and instantiating the Control Loop with the state "UNINITIALISED".
Using postman, commision a TOSCA template and instantiate using the following template:
Creation of policies and policyTypes:
*************************************
+
The Controlloop STATE is changed from UNINITIALISED to PASSIVE using postman:
.. code-block:: json
Deployment of policies:
***********************
+
The Controlloop STATE is changed from PASSIVE to RUNNING using postman:
.. code-block:: json
Undeployment of policies:
*************************
+
The Controlloop STATE is changed from RUNNING to PASSIVE using postman:
.. code-block:: json
Deletion of policies and policyTypes:
*************************************
+
The Controlloop STATE is changed from PASSIVE to UNINITIALISED using postman:
.. code-block:: json
.. image:: images/pol-part-controlloop-sirisha-nf.png
.. image:: images/pol-part-controlloop-pmcontrol-nf.png
-
Code Review / policy / parent.git / commitdiff