VM Details
----------
-The stability and performance tests are performed on VM's running in the OpenStack cloud environment in the ONAP integration lab. There are two separate VMs, one for running backend policy services which policy distribution needs, and the other for the policy distribution service itself and Jmeter.
+The stability and performance tests are performed on VM's running in the OpenStack cloud
+environment in the ONAP integration lab. There are two separate VMs, one for running backend policy
+services which policy distribution needs, and the other for the policy distribution service itself
+and Jmeter.
**OpenStack environment details**
- Docker version 19.03.8, build afacb8b7f0
- Java: openjdk 11.0.8 2020-07-14
-**JMeter and Distribution VM details (VM2)**
-- OS: Ubuntu 18.04.5 LTS
-- CPU: 8 core, Intel Xeon E3-12xx v2 (Ivy Bridge), 2693.668 MHz, 16384 kB cache
-- RAM: 32 GB
-- HardDisk: 200 GB
-- Docker version 19.03.8, build afacb8b7f0
-- Java: openjdk 11.0.8 2020-07-14
-- JMeter: 5.1.1
-
-
-VM1 & VM2: Common Setup
------------------------
-Make sure to execute below commands on both VM1 & VM2
+Common Setup
+------------
Update the ubuntu software installer
OpenJDK Runtime Environment (build 11.0.8+10-post-Ubuntu-0ubuntu118.04.1)
OpenJDK 64-Bit Server VM (build 11.0.8+10-post-Ubuntu-0ubuntu118.04.1, mixed mode, sharing)
-Install Docker
+Install Docker and Docker Compose
.. code-block:: bash
# Add docker repository
- curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
- sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
- sudo apt update
+ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
+
+ echo "deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu \
+ $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
- # Check available docker versions (if necessary)
- apt-cache policy docker-ce
+ sudo apt update
# Install docker
- sudo apt install -y docker-ce=5:19.03.8~3-0~ubuntu-bionic docker-ce-cli=5:19.03.8~3-0~ubuntu-bionic containerd.io
+ sudo apt-get install docker-ce docker-ce-cli containerd.io
Change the permissions of the Docker socket file
.. code-block:: bash
- $ systemctl status --no-pager docker
+ systemctl status --no-pager docker
docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2020-10-14 13:59:40 UTC; 1 weeks 0 days ago
# ... (truncated for brevity)
- $ docker ps
+ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
-Clone the policy-distribution repo to access the test scripts
+Install and verify docker-compose
.. code-block:: bash
- git clone https://gerrit.onap.org/r/policy/distribution
+ # Install compose
+ sudo curl -L "https://github.com/docker/compose/releases/download/1.29.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
+ sudo chmod +x /usr/local/bin/docker-compose
+ # Check if install was successful
+ docker-compose --version
-VM1 Only: Install Simulators, Policy-PAP, Policy-API and MariaDB
-----------------------------------------------------------------
+Clone the policy-distribution repo to access the test scripts
-Modify the setup_components.sh script located at:
+.. code-block:: bash
-- ~/distribution/testsuites/stability/src/main/resources/simulatorsetup/setup_components.sh
+ git clone https://gerrit.onap.org/r/policy/distribution
-Ensure the correct docker image versions are specified - e.g. for Guilin-RC0
+.. _setup-distribution-s3p-components:
-- nexus3.onap.org:10001/onap/policy-api:2.3.2
-- nexus3.onap.org:10001/onap/policy-pap:2.3.2
+Start services for MariaDB, Policy API, PAP and Distribution
+------------------------------------------------------------
-Run the setup_components.sh script to start the test support components:
+Navigate to the main folder for scripts to setup services:
.. code-block:: bash
- ~/distribution/testsuites/stability/src/main/resources/simulatorsetup/setup_components.sh
+ cd ~/distribution/testsuites/stability/src/main/resources/setup
-After installation, ensure the following docker containers are up and running:
+Modify the versions.sh script to match all the versions being tested.
.. code-block:: bash
- $ docker ps
- CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
- a187cb0ff08a nexus3.onap.org:10001/onap/policy-pap:2.3.2 "bash ./policy-pap.sh" 4 days ago Up 4 days 0.0.0.0:7000->6969/tcp policy-pap
- 2f7632fe90c3 nexus3.onap.org:10001/onap/policy-api:2.3.2 "bash ./policy-api.sh" 4 days ago Up 4 days 0.0.0.0:6969->6969/tcp policy-api
- 70fa27d6d992 pdp/simulator:latest "bash pdp-sim.sh" 4 days ago Up 4 days pdp-simulator
- 3c9ff28ba050 dmaap/simulator:latest "bash dmaap-sim.sh" 4 days ago Up 4 days 0.0.0.0:3904->3904/tcp message-router
- 60cfcf8cfe65 mariadb:10.2.14 "docker-entrypoint.s…" 4 days ago Up 4 days 0.0.0.0:3306->3306/tcp mariadb
-
+ vi ~/distribution/testsuites/stability/src/main/resources/setup/versions.sh
-VM2 Only: Install Distribution
-------------------------------
+Ensure the correct docker image versions are specified - e.g. for Istanbul-M4
-Modify the setup_distribution.sh script located at:
+- export POLICY_DIST_VERSION=2.6.1-SNAPSHOT
-- ~/distribution/testsuites/stability/src/main/resources/distributionsetup/setup_distribution.sh
-
-Ensure the correct docker image version is specified - e.g. for Guilin-RC0:
-
-- nexus3.onap.org:10001/onap/policy-distribution:2.4.2
-
-Run the setup_distribution.sh script to install the distribution service, provide the IP of VM1 (twice) as the arguments to the script:
+Run the start.sh script to start the components. After installation, script will execute
+``docker ps`` and show the running containers.
.. code-block:: bash
- ~/distribution/testsuites/stability/src/main/resources/distributionsetup/setup_distribution.sh <vm1-ipaddr> <vm1-ipaddr>
+ ./start.sh
-Ensure the distribution container is running.
+ Creating network "setup_default" with the default driver
+ Creating policy-distribution ... done
+ Creating mariadb ... done
+ Creating simulator ... done
+ Creating policy-db-migrator ... done
+ Creating policy-api ... done
+ Creating policy-pap ... done
+
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ f91be98ad1f4 nexus3.onap.org:10001/onap/policy-pap:2.5.1-SNAPSHOT "/opt/app/policy/pap…" 1 second ago Up Less than a second 6969/tcp policy-pap
+ d92cdbe971d4 nexus3.onap.org:10001/onap/policy-api:2.5.1-SNAPSHOT "/opt/app/policy/api…" 1 second ago Up Less than a second 6969/tcp policy-api
+ 9a019f5d641e nexus3.onap.org:10001/onap/policy-db-migrator:2.3.1-SNAPSHOT "/opt/app/policy/bin…" 2 seconds ago Up 1 second 6824/tcp policy-db-migrator
+ 108ba238edeb nexus3.onap.org:10001/mariadb:10.5.8 "docker-entrypoint.s…" 3 seconds ago Up 1 second 3306/tcp mariadb
+ bec9b223e79f nexus3.onap.org:10001/onap/policy-models-simulator:2.5.1-SNAPSHOT "simulators.sh" 3 seconds ago Up 1 second 3905/tcp simulator
+ 74aa5abeeb08 nexus3.onap.org:10001/onap/policy-distribution:2.6.1-SNAPSHOT "/opt/app/policy/bin…" 3 seconds ago Up 1 second 6969/tcp, 9090/tcp policy-distribution
-.. code-block:: bash
- $ docker ps
- CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
- 9a8db2bad156 nexus3.onap.org:10001/onap/policy-distribution:2.4.2 "bash ./policy-dist.…" 29 hours ago Up 29 hours 0.0.0.0:6969->6969/tcp, 0.0.0.0:9090->9090/tcp policy-distribution
+.. note::
+ The containers on this docker-compose are running with HTTP configuration. For HTTPS, ports
+ and configurations will need to be changed, as well certificates and keys must be generated
+ for security.
-VM2 Only: Install JMeter
-------------------------
+Install JMeter
+--------------
Download and install JMeter
# Install JMeter
mkdir -p jmeter
- wget https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.1.1.zip
- unzip -qd jmeter apache-jmeter-5.1.1.zip
- rm apache-jmeter-5.1.1.zip
+ cd jmeter
+ wget https://dlcdn.apache.org//jmeter/binaries/apache-jmeter-5.4.1.zip
+ unzip -q apache-jmeter-5.4.1.zip
+ rm apache-jmeter-5.4.1.zip
-VM2 Only: Install & configure visualVM
+Install & configure visualVM
--------------------------------------
-VisualVM needs to be installed in the virtual machine running Distribution (VM2). It will be used to monitor CPU, Memory and GC for Distribution while the stability tests are running.
+VisualVM needs to be installed in the virtual machine running Distribution. It will be used to
+monitor CPU, Memory and GC for Distribution while the stability tests are running.
.. code-block:: bash
.. code-block:: bash
+ # Set globally accessable permissions on policy file
+ sudo chmod 777 /usr/lib/jvm/java-11-openjdk-amd64/bin/visualvm.policy
+
# Create Java security policy file for VisualVM
sudo cat > /usr/lib/jvm/java-11-openjdk-amd64/bin/visualvm.policy << EOF
grant codebase "jrt:/jdk.jstatd" {
};
EOF
- # Set globally accessable permissions on policy file
- sudo chmod 777 /usr/lib/jvm/java-11-openjdk-amd64/bin/visualvm.policy
-
Run the following command to start jstatd using port 1111
.. code-block:: bash
/usr/lib/jvm/java-11-openjdk-amd64/bin/jstatd -p 1111 -J-Djava.security.policy=/usr/lib/jvm/java-11-openjdk-amd64/bin/visualvm.policy &
-Run visualVM to connect to localhost:9090
+Run visualVM to connect to POLICY_DISTRIBUTION_IP:9090
.. code-block:: bash
+ # Get the Policy Distribution container IP
+ echo $(docker inspect -f '{{range.NetworkSettings.Networks}}{{.IPAddress}}{{end}}' policy-distribution)
+
+ # Start visual vm
visualvm &
This will load up the visualVM GUI
Connect to Distribution JMX Port.
1. Right click on "Local" in the left panel of the screen and select "Add JMX Connection"
- 2. Enter the Port 9090. this is the JMX port exposed by the distribution container
+ 2. Enter the Distribution container IP and Port 9090. This is the JMX port exposed by the
+ distribution container
3. Double click on the newly added nodes under "Local" to start monitoring CPU, Memory & GC.
Example Screenshot of visualVM
-.. image:: images/distribution-s3p-vvm-sample.png
+.. image:: images/distribution/distribution-s3p-vvm-sample.png
Stability Test of Policy Distribution
Introduction
------------
-The 72 hour Stability Test for policy distribution has the goal of introducing a steady flow of transactions initiated from a test client server running JMeter. The policy distribution is configured with a special FileSystemReception plugin to monitor a local directory for newly added csar files to be processed by itself. The input CSAR will be added/removed by the test client(JMeter) and the result will be pulled from the backend (PAP and PolicyAPI) by the test client (JMeter).
+The 72 hour Stability Test for policy distribution has the goal of introducing a steady flow of
+transactions initiated from a test client server running JMeter. The policy distribution is
+configured with a special FileSystemReception plugin to monitor a local directory for newly added
+csar files to be processed by itself. The input CSAR will be added/removed by the test client
+(JMeter) and the result will be pulled from the backend (PAP and PolicyAPI) by the test client
+(JMeter).
-The test will be performed in an environment where Jmeter will continuously add/remove a test csar into the special directory where policy distribution is monitoring and will then get the processed results from PAP and PolicyAPI to verify the successful deployment of the policy. The policy will then be undeployed and the test will loop continuously until 72 hours have elapsed.
+The test will be performed in an environment where Jmeter will continuously add/remove a test csar
+into the special directory where policy distribution is monitoring and will then get the processed
+results from PAP and PolicyAPI to verify the successful deployment of the policy. The policy will
+then be undeployed and the test will loop continuously until 72 hours have elapsed.
Test Plan Sequence
Screenshot of Distribution stability test plan
-.. image:: images/distribution-s3p-testplan.png
+.. image:: images/distribution/distribution-s3p-testplan.png
Running the Test Plan
---------------------
-Edit the /tmp folder permissions to allow the testplan to insert the CSAR into the /tmp/policydistribution/distributionmount folder
+Check if the /tmp/policydistribution/distributionmount exists as it was created during the start.sh
+script execution. If not, run the following commands to create folder and change folder permissions
+to allow the testplan to insert the CSAR into the /tmp/policydistribution/distributionmount folder.
.. code-block:: bash
sudo mkdir -p /tmp/policydistribution/distributionmount
sudo chmod -R a+trwx /tmp
-From the apache JMeter folder run the test for 72h, pointing it towards the stability.jmx file inside the testplans folder and specifying a logfile to collect the results
+
+Navigate to the stability test folder.
+
+.. code-block:: bash
+
+ cd ~/distribution/testsuites/stability/src/main/resources/testplans/
+
+Execute the run_test.sh
.. code-block:: bash
- ~/jmeter/apache-jmeter-5.1.1/bin/jmeter -n -t ~/distribution/testsuites/stability/src/main/resources/testplans/stability.jmx -Jduration=259200 -l ~/distr-stability.jtl &
+ ./run_test.sh
Test Results
**Test Statistics**
-.. image:: images/dist_stability_statistics.PNG
-.. image:: images/dist_stability_threshold.PNG
+.. image:: images/distribution/dist_stability_statistics.PNG
+.. image:: images/distribution/dist_stability_threshold.PNG
**VisualVM Screenshots**
-.. image:: images/dist_stability_monitor.PNG
-.. image:: images/dist_stability_threads.PNG
+.. image:: images/distribution/dist_stability_monitor.PNG
+.. image:: images/distribution/dist_stability_threads.PNG
Performance Test of Policy Distribution
Introduction
------------
-The 4h Performance Test of Policy Distribution has the goal of testing the min/avg/max processing time and rest call throughput for all the requests when the number of requests are large enough to saturate the resource and find the bottleneck.
+The 4h Performance Test of Policy Distribution has the goal of testing the min/avg/max processing
+time and rest call throughput for all the requests when the number of requests are large enough to
+saturate the resource and find the bottleneck.
-It also tests that distribution can handle multiple policy CSARs and that these are deployed within 30 seconds consistently.
+It also tests that distribution can handle multiple policy CSARs and that these are deployed within
+30 seconds consistently.
Setup Details
Performance test plan is different from the stability test plan.
-- Instead of handling one policy csar at a time, multiple csar's are deployed within the watched folder at the exact same time.
+- Instead of handling one policy csar at a time, multiple csar's are deployed within the watched
+ folder at the exact same time.
- We expect all policies from these csar's to be deployed within 30 seconds.
-- There are also multithreaded tests running towards the healthcheck and statistics endpoints of the distribution service.
+- There are also multithreaded tests running towards the healthcheck and statistics endpoints of
+ the distribution service.
Running the Test Plan
---------------------
-Edit the /tmp folder permissions to allow the Testplan to insert the CSAR into the /tmp/policydistribution/distributionmount folder.
+Check if /tmp folder permissions to allow the Testplan to insert the CSAR into the
+/tmp/policydistribution/distributionmount folder.
+Clean up from previous run. If necessary, put containers down with script `down.sh` from setup
+folder mentioned on :ref:`Setup components <setup-distribution-s3p-components>`
.. code-block:: bash
sudo mkdir -p /tmp/policydistribution/distributionmount
sudo chmod -R a+trwx /tmp
-From the apache JMeter folder run the test for 4h, pointing it towards the performance.jmx file inside the testplans folder and specifying a logfile to collect the results
+Navigate to the testplan folder and execute the test script:
.. code-block:: bash
- ~/jmeter/apache-jmeter-5.1.1/bin/jmeter -n -t ~/distribution/testsuites/performance/src/main/resources/testplans/performance.jmx -Jduration=14400 -l ~/distr-performance.jtl &
+ cd ~/distribution/testsuites/performance/src/main/resources/testplans/
+ ./run_test.sh
+
Test Results
------------
**Test Statistics**
-.. image:: images/dist_perf_statistics.PNG
-.. image:: images/dist_perf_threshold.PNG
+.. image:: images/distribution/performance-statistics.png
+.. image:: images/distribution/performance-threshold.png
**VisualVM Screenshots**
-.. image:: images/20201020-1730-distr-performance-20201020T2025-monitor.png
-.. image:: images/20201020-1730-distr-performance-20201020T2025-threads.png
+.. image:: images/distribution/performance-monitor.png
+.. image:: images/distribution/performance-threads.png
Code Review / policy / parent.git / commitdiff
