packages/docker/src/main/docker/docker-install.sh

   1 #!/bin/bash
   2 #
   3 #============LICENSE_START==================================================
   4 #  ONAP Policy Engine
   5 #===========================================================================
   6 #  Copyright (C) 2017-2018 AT&T Intellectual Property. All rights reserved.
   7 #===========================================================================
   8 # Licensed under the Apache License, Version 2.0 (the "License");
   9 # you may not use this file except in compliance with the License.
  10 # You may obtain a copy of the License at
  11 #
  12 #         http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 # Unless required by applicable law or agreed to in writing, software
  15 # distributed under the License is distributed on an "AS IS" BASIS,
  16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  17 # See the License for the specific language governing permissions and
  18 # limitations under the License.
  19 #============LICENSE_END==================================================
  20 #
  21
  22
  23 #########################################################################
  24 ##
  25 ## Functions
  26 ##
  27 #########################################################################
  28
  29 function usage() {
  30         echo -n "syntax: $(basename $0) "
  31         echo -n "--debug ("
  32         echo -n "[--install base|pap|pdp|console|mysql|elk|brmsgw|paplp|pdplp] | "
  33         echo -n "[--configure base|pap|pdp|console|mysql|elk|brmsgw|paplp|pdplp] | "
  34 }
  35
  36 function check_java() {
  37         if [[ $DEBUG == y ]]; then
  38                 echo "-- ${FUNCNAME[0]} $@ --"
  39                 set -x
  40         fi
  41
  42         TARGET_JAVA_VERSION=$1
  43
  44         if [[ -z ${JAVA_HOME} ]]; then
  45                 echo "error: ${JAVA_HOME} is not set"
  46                 return 1
  47         fi
  48
  49         if ! check_x_file "${JAVA_HOME}/bin/java"; then
  50                 echo "error: ${JAVA_HOME}/bin/java is not accessible"
  51                 return 1
  52         fi
  53
  54         INSTALLED_JAVA_VERSION=$("${JAVA_HOME}/bin/java" -version 2>&1 | awk -F '"' '/version/ {print $2}')
  55         if [[ -z $INSTALLED_JAVA_VERSION ]]; then
  56                 echo "error: ${JAVA_HOME}/bin/java is invalid"
  57                 return 1
  58         fi
  59
  60         if [[ "${INSTALLED_JAVA_VERSION}" != ${TARGET_JAVA_VERSION}* ]]; then
  61                 echo "error: java version (${INSTALLED_JAVA_VERSION}) does not"\
  62                          "march desired version ${TARGET_JAVA_VERSION}"
  63                 return 1
  64         fi
  65
  66         echo "OK: java ${INSTALLED_JAVA_VERSION} installed"
  67
  68 }
  69
  70 function process_configuration() {
  71         if [[ $DEBUG == y ]]; then
  72                 echo "-- ${FUNCNAME[0]} $@ --"
  73                 set -x
  74         fi
  75
  76         CONF_FILE=$1
  77         while read line || [ -n "${line}" ]; do
  78         if [[ -n ${line} ]] && [[ ${line} != \#* ]]; then
  79                 name=$(echo "${line%%=*}")
  80                 value=$(echo "${line#*=}")
  81                 # escape ampersand so that sed does not replace it with the search string
  82             value=${value//&/\\&}
  83                 if [[ -z ${name} ]] || [[ -z $value ]]; then
  84                         echo "WARNING: ${line} missing name or value"
  85                 fi
  86                 export ${name}="${value}"
  87                 eval "${name}" "${value}" 2> /dev/null
  88         fi
  89         done < "${CONF_FILE}"
  90         return 0
  91 }
  92
  93 function component_preconfigure() {
  94         if [[ $DEBUG == y ]]; then
  95                 echo "-- ${FUNCNAME[0]} $@ --"
  96                 set -x
  97         fi
  98
  99         /bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \
 100                 -e 's!${{FQDN}}!'"${FQDN}!g" \
 101                 *.conf > /dev/null 2>&1
 102 }
 103
 104 function tomcat_component() {
 105         if [[ $DEBUG == y ]]; then
 106                 echo "-- ${FUNCNAME[0]} $@ --"
 107                 set -x
 108         fi
 109
 110         TOMCAT_TARGET_INSTALL_DIR=${POLICY_HOME}/servers/${COMPONENT_TYPE}
 111         if [[ -d ${TOMCAT_TARGET_INSTALL_DIR} ]]; then
 112                 echo "error: ${TOMCAT_TARGET_INSTALL_DIR} exists."
 113                 return 1
 114         fi
 115
 116         TOMCAT_INSTALL_DIR=${POLICY_HOME}/install/3rdparty/${TOMCAT_PACKAGE_NAME}/
 117         if [[ -d ${TOMCAT_INSTALL_DIR} ]]; then
 118                 echo "error: ${TOMCAT_INSTALL_DIR} exists."
 119                 return 1
 120         fi
 121
 122         tar -C "${POLICY_HOME}/servers" -xf "${POLICY_HOME}/install/3rdparty/${TOMCAT_PACKAGE_NAME}.tar.gz"
 123
 124         mv "${POLICY_HOME}/servers/${TOMCAT_PACKAGE_NAME}" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/"
 125         /bin/cp "${POLICY_HOME}"/install/servers/common/tomcat/bin/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/bin"
 126         /bin/cp "${POLICY_HOME}"/install/servers/common/tomcat/conf/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/conf"
 127
 128         /bin/cp "${POLICY_HOME}/install/servers/common/tomcat/init.d/tomcatd" "${POLICY_HOME}/etc/init.d/${COMPONENT_TYPE}"
 129         /bin/sed -i -e "s!\${{COMPONENT_TYPE}}!${COMPONENT_TYPE}!g" "${POLICY_HOME}/etc/init.d/${COMPONENT_TYPE}" >/dev/null 2>&1
 130
 131
 132         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/webapps/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps"
 133         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/bin/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/bin" >/dev/null 2>&1
 134         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/conf/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/conf" >/dev/null 2>&1
 135
 136         /bin/rm -fr "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/docs" \
 137                  "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/examples" \
 138                  "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/ROOT" \
 139                  "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/manager" \
 140                  "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/host-manager"
 141
 142         if [[ ${COMPONENT_TYPE} == console ]]; then
 143                 install_onap_portal_settings
 144         fi
 145
 146         return 0
 147 }
 148
 149 function configure_tomcat_component() {
 150         configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/"
 151 }
 152
 153 function configure_component() {
 154         if [[ $DEBUG == y ]]; then
 155                 echo "-- ${FUNCNAME[0]} $@ --"
 156                 set -x
 157         fi
 158
 159         if ! process_configuration "${COMPONENT_TYPE}.conf"; then
 160                 echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf"
 161                 exit 1
 162         fi
 163
 164         CONF_FILE=$1
 165         COMPONENT_ROOT_DIR=$2
 166
 167         SED_LINE="sed -i"
 168         SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' "
 169         SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' "
 170         SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' "
 171         SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' "
 172         SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' "
 173         SED_LINE+=" -e 's!\${{COMPONENT_TYPE}}!${COMPONENT_TYPE}!g' "
 174         SED_LINE+=" -e 's!\${{POLICY_LOGS}}!${POLICY_LOGS}!g' "
 175
 176         while read line || [ -n "${line}" ]; do
 177         if [[ -n $line ]] && [[ $line != \#* ]]; then
 178                 name=$(echo "${line%%=*}")
 179                 value=$(echo "${line#*=}")
 180                 # escape ampersand so that sed does not replace it with the search string
 181                 value=${value//&/\\&}
 182                 if [[ -z ${name} ]] || [[ -z ${value} ]]; then
 183                         echo "WARNING: ${line} missing name or value"
 184                 fi
 185                 SED_LINE+=" -e 's!\${{${name}}}!${value}!g' "
 186
 187         fi
 188         done < "$CONF_FILE"
 189
 190         SED_FILES=""
 191         for sed_file in $(find "${COMPONENT_ROOT_DIR}" -name '*.xml' -o -name '*.sh' -o -name '*.properties' -o -name '*.conf' -o -name '*.cfg' -o -name '*.template' -o -name '*.conf' -o -name '*.cron' -o -name '*.json' | grep -v /backup/); do
 192                 if fgrep -l '${{' ${sed_file} > /dev/null 2>&1; then
 193                         SED_FILES+="${sed_file} "
 194                 fi
 195         done
 196
 197         if [[ -f $HOME/.m2/settings.xml ]]; then
 198                 SED_FILES+="$HOME/.m2/settings.xml "
 199         fi
 200
 201
 202         if [[ -z ${SED_FILES} ]]; then
 203                 echo "WARNING: no xml, sh, properties, or conf files to perform configuration expansion"
 204         else
 205                 SED_LINE+=${SED_FILES}
 206                 eval "${SED_LINE}"
 207         fi
 208
 209         list_unexpanded_files ${POLICY_HOME}
 210 }
 211
 212 function install_onap_portal_settings() {
 213         echo "Install onap portal settings"
 214
 215         # unpack onap war file
 216         mkdir -p "${POLICY_HOME}"/servers/console/webapps/onap
 217         cd "${POLICY_HOME}"/servers/console/webapps/onap
 218         unzip -q ../onap.war
 219         cd ${INSTALL_DIR}
 220
 221         # copy over the configured settings
 222         /bin/cp -fr "${POLICY_HOME}"/install/servers/onap/* "${POLICY_HOME}/servers/console/webapps/onap"
 223 }
 224
 225 function check_r_file() {
 226         if [[ $DEBUG == y ]]; then
 227                 echo "-- ${FUNCNAME[0]} $@ --"
 228                 set -x
 229         fi
 230
 231         FILE=$1
 232         if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then
 233         return 1
 234         fi
 235
 236         return 0
 237 }
 238
 239 function check_x_file() {
 240         if [[ $DEBUG == y ]]; then
 241                 echo "-- ${FUNCNAME[0]} $@ --"
 242                 set -x
 243         fi
 244
 245         FILE=$1
 246         if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then
 247         return 1
 248         fi
 249
 250         return 0
 251 }
 252
 253 function install_prereqs() {
 254         if [[ $DEBUG == y ]]; then
 255                 echo "-- ${FUNCNAME[0]} $@ --"
 256                 set -x
 257         fi
 258
 259         CONF_FILE=$1
 260
 261         if ! check_r_file "${CONF_FILE}"; then
 262                 echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible"
 263                 exit 1
 264         fi
 265
 266         if ! process_configuration "${CONF_FILE}"; then
 267                 echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}"
 268                 exit 1
 269         fi
 270
 271 #       if ! check_java "1.8"; then
 272 #               echo "error: aborting ${COMPONENT_TYPE} installation: invalid java version"
 273 #               exit 1
 274 #       fi
 275
 276         if [[ -z ${POLICY_HOME} ]]; then
 277                 echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set"
 278                 exit 1
 279         fi
 280
 281         HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}')
 282         if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then
 283                 echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory"
 284                 exit 1
 285         fi
 286
 287         echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} "
 288         echo "ownership with umask $(umask)."
 289 }
 290
 291 function list_unexpanded_files() {
 292         ROOT_DIR=$1
 293         SEARCH_LIST=$(find ${ROOT_DIR} -type f -name '*.properties' -o -name '*.sh'  -o -name '*.conf' -o -name '*.yml' -o -name '*.template' -o -name '*.xml' -o -name '*.cfg' -o -name '*.json' -o -path "${ROOT_DIR}/etc/init.d/*" | egrep -v '/m2/|/install/|/logs/')
 294     NOT_EXPANDED_BASE_FILES=$(grep -l '${{' ${SEARCH_LIST} 2> /dev/null)
 295         if [[ -n ${NOT_EXPANDED_BASE_FILES} ]]; then
 296                 echo "error: component installation has completed but some base files have not been expanded:"
 297                 echo "${NOT_EXPANDED_BASE_FILES}"
 298                 return 1
 299         fi
 300         return 0
 301 }
 302
 303 function install_base() {
 304         if [[ $DEBUG == y ]]; then
 305                 echo "-- ${FUNCNAME[0]} $@ --"
 306                 set -x
 307         fi
 308
 309         install_prereqs "${BASE_CONF}"
 310
 311         if [[ -z ${POLICY_HOME} ]]; then
 312                 echo "error: ${POLICY_HOME} is not set"
 313                 exit 1
 314         fi
 315
 316         POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2> /dev/null)
 317         if [[ -n ${POLICY_HOME_CONTENTS} ]]; then
 318                 echo "error: aborting base installation: ${POLICY_HOME} directory is not empty"
 319                 exit 1
 320         fi
 321
 322         if [[ ! -d ${POLICY_HOME} ]]; then
 323                 echo "error: aborting base installation: ${POLICY_HOME} is not a directory."
 324                 exit 1
 325         fi
 326
 327         if ! /bin/mkdir -p "${POLICY_HOME}/servers/" > /dev/null 2>&1; then
 328                 echo "error: aborting base installation: cannot create ${POLICY_HOME}/servers/"
 329                 exit 1
 330         fi
 331
 332         if ! /bin/mkdir -p "${POLICY_LOGS}" > /dev/null 2>&1; then
 333                 echo "error: aborting base installation: cannot create ${POLICY_LOGS}"
 334                 exit 1
 335         fi
 336
 337         if ! /bin/mkdir -p "${POLICY_HOME}/logs/" > /dev/null 2>&1; then
 338                 echo "error: aborting base installation: cannot create ${POLICY_HOME}/logs/"
 339                 exit 1
 340         fi
 341
 342         BASE_TGZ=$(ls base-*.tar.gz)
 343         if [ ! -r ${BASE_TGZ} ]; then
 344                 echo "error: aborting base installation: ${POLICY_USER} cannot access tar file: ${BASE_TGZ}"
 345                 exit 1
 346         fi
 347
 348         tar -tzf ${BASE_TGZ} > /dev/null 2>&1
 349         if [[ $? != 0 ]]; then
 350                 echo >&2 "error: aborting base installation: invalid base package tar file: ${BASE_TGZ}"
 351                 exit 1
 352         fi
 353
 354         BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
 355         PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
 356
 357         tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner
 358         if [[ $? != 0 ]]; then
 359                 # this should not happened
 360                 echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}"
 361                 exit 1
 362         fi
 363
 364         /bin/mkdir -p ${POLICY_HOME}/etc/init.d > /dev/null 2>&1
 365         /bin/mkdir -p ${POLICY_HOME}/tmp > /dev/null 2>&1
 366         /bin/mkdir -p ${POLICY_HOME}/var > /dev/null 2>&1
 367
 368         #list_unexpanded_files ${POLICY_HOME}
 369 }
 370
 371
 372 function configure_base() {
 373         if [[ $DEBUG == y ]]; then
 374                 echo "-- ${FUNCNAME[0]} $@ --"
 375                 set -x
 376         fi
 377
 378         # check if fqdn is set in base.conf and use that value if set
 379         if [[ -z ${INSTALL_FQDN} ]]
 380         then
 381                 echo "FQDN not set in config...using the default FQDN ${FQDN}"
 382         else
 383                 echo "Using FQDN ${INSTALL_FQDN} from config"
 384                 FQDN=${INSTALL_FQDN}
 385         fi
 386
 387         configure_component "${BASE_CONF}" "${POLICY_HOME}"
 388
 389         BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
 390         PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
 391
 392         if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bash_profile" >/dev/null 2>&1; then
 393                 echo "${BASH_PROFILE_LINE}" >> "${HOME}/.bash_profile"
 394         fi
 395
 396         if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then
 397                 echo "${PROFILE_LINE}" >> "${HOME}/.profile"
 398         fi
 399 }
 400
 401 function configure_keystore() {
 402         if [[ $DEBUG == y ]]; then
 403                 echo "-- ${FUNCNAME[0]} --"
 404                 set -x
 405         fi
 406
 407     local DEFAULT_KEYSTORE_PASSWORD="Pol1cy_0nap"
 408
 409         if [[ -n ${KEYSTORE_PASSWD} ]]; then
 410             keytool -storepasswd -storepass ${DEFAULT_KEYSTORE_PASSWORD} -keystore ${POLICY_HOME}/etc/ssl/policy-keystore -new ${KEYSTORE_PASSWD}
 411             keytool -list -keystore ${POLICY_HOME}/etc/ssl/policy-keystore -storepass ${KEYSTORE_PASSWD}
 412         fi
 413 }
 414
 415
 416 function install_tomcat_component() {
 417         if [[ $DEBUG == y ]]; then
 418                 echo "-- ${FUNCNAME[0]} $@ --"
 419                 set -x
 420         fi
 421
 422         install_prereqs "${BASE_CONF}"
 423
 424         if ! process_configuration "${COMPONENT_TYPE}.conf"; then
 425                 echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf"
 426                 exit 1
 427         fi
 428
 429         if ! tomcat_component; then
 430                 echo "error: aborting ${COMPONENT_TYPE} installation: tomcat installation failed."
 431                 exit 1
 432         fi
 433
 434 }
 435
 436 # This function installs mysql related shell scripts and sql files in the proper locations
 437 # under $POLICY_HOME. It also adds the MySQL client bin to the PATH based on configuration.
 438 #
 439 function install_mysql() {
 440         if [[ $DEBUG == y ]]; then
 441                 echo "-- ${FUNCNAME[0]} $@ --"
 442                 set -x
 443         fi
 444
 445         install_prereqs "${BASE_CONF}"
 446
 447         if ! process_configuration "${COMPONENT_TYPE}.conf"; then
 448                 echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf"
 449                 exit 1
 450         fi
 451
 452         MYSQL_DATA_PATH=${POLICY_HOME}/data/mysql
 453         /bin/mkdir -p ${MYSQL_DATA_PATH} > /dev/null 2>&1
 454
 455         /bin/cp -f "${POLICY_HOME}"/install/mysql/data/* "${MYSQL_DATA_PATH}"
 456         /bin/chmod 555 "${MYSQL_DATA_PATH}"/*
 457
 458         MYSQL_BIN_SOURCE=${POLICY_HOME}/install/mysql/bin
 459         /bin/mkdir -p ${POLICY_HOME}/bin > /dev/null 2>&1
 460         for script in $(/bin/ls "${MYSQL_BIN_SOURCE}"); do
 461                 /bin/cp ${MYSQL_BIN_SOURCE}/${script} ${POLICY_HOME}/bin
 462                 /bin/chmod 555 "${POLICY_HOME}/bin/${script}"
 463         done
 464 }
 465
 466 function configure_mysql() {
 467         if [[ $DEBUG == y ]]; then
 468                 echo "-- ${FUNCNAME[0]} $@ --"
 469                 set -x
 470         fi
 471
 472         # nothing to do
 473 }
 474
 475 # This function installs elk related shell scripts and sql files in the proper locations
 476 # under $POLICY_HOME. It also adds the Elk to the PATH based on configuration.
 477 #
 478 function configure_elk() {
 479         if [[ $DEBUG == y ]]; then
 480                 echo "-- ${FUNCNAME[0]} $@ --"
 481                 set -x
 482         fi
 483
 484         # nothing to do
 485 }
 486
 487 function install_elk() {
 488         if [[ $DEBUG == y ]]; then
 489                 echo "-- ${FUNCNAME[0]} $@ --"
 490                 set -x
 491         fi
 492
 493         if [[ -f "${HOME}/.bash_profile" ]]; then
 494                 source "${HOME}/.bash_profile"
 495         fi
 496
 497         if [[ -f "${HOME}/.profile" ]]; then
 498                 source "${HOME}/.profile"
 499         fi
 500
 501         ELK_TARGET_INSTALL_DIR="${POLICY_HOME}"/elk
 502
 503         if [[ -d ${ELK_TARGET_INSTALL_DIR} ]]; then
 504                 echo "WARNING: ${ELK_TARGET_INSTALL_DIR} exists."
 505                 return 1
 506         fi
 507
 508         /bin/mkdir -p "${ELK_TARGET_INSTALL_DIR}" > /dev/null 2>&1
 509
 510         if [[ ! -d ${ELK_TARGET_INSTALL_DIR} ]]; then
 511                 echo "WARNING: ${ELK_TARGET_INSTALL_DIR} doesn't exist."
 512                 return 1
 513         fi
 514
 515         cd ${ELK_TARGET_INSTALL_DIR}
 516         curl -L -O https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-5.4.0.tar.gz
 517
 518         tar xvzf elasticsearch-5.4.0.tar.gz -C .
 519         /bin/rm -fr elasticsearch-5.4.0.tar.gz
 520         /bin/mv  ${ELK_TARGET_INSTALL_DIR}/elasticsearch-5.4.0/* .
 521         /bin/rm -fr ${ELK_TARGET_INSTALL_DIR}/elasticsearch-5.4.0
 522
 523         /bin/cp "${POLICY_HOME}"/install/elk/bin/* "${POLICY_HOME}/bin"
 524         /bin/cp -f "${POLICY_HOME}"/install/elk/config/* "${ELK_TARGET_INSTALL_DIR}/config"
 525         /bin/cp -f "${POLICY_HOME}/install/elk/init.d/elkd" "${POLICY_HOME}/etc/init.d/elk"
 526
 527         install_prereqs "${COMPONENT_TYPE}.conf"
 528
 529         /bin/sed -i -e "s!\${{POLICY_HOME}}!${POLICY_HOME}!g" \
 530                 -e "s!\${{FQDN}}!${FQDN}!g" \
 531                 -e "s!\${{ELK_JMX_PORT}}!${ELK_JMX_PORT}!g" \
 532                 "${ELK_TARGET_INSTALL_DIR}"/config/* "${POLICY_HOME}/etc/init.d/elk" > /dev/null 2>&1
 533
 534
 535         list_unexpanded_files ${POLICY_HOME}
 536
 537         return $?
 538 }
 539
 540 # This function installs brmsgw related shell scripts and config files in the proper
 541 # locations under $POLICY_HOME.
 542 #
 543
 544 function install_brmsgw() {
 545         if [[ $DEBUG == y ]]; then
 546                 echo "-- ${FUNCNAME[0]} $@ --"
 547                 set -x
 548         fi
 549
 550         install_prereqs "${BASE_CONF}"
 551
 552         if [[ -n ${BUILD_VERSION} ]]; then
 553                 echo "Replacing ${BUILD_VERSION} in ${COMPONENT_TYPE}.conf"
 554                 sed -i -e "s/^BRMS_DEPENDENCY_VERSION=.*$/BRMS_DEPENDENCY_VERSION=${BUILD_VERSION}/g" "${COMPONENT_TYPE}.conf"
 555         fi
 556
 557         if ! process_configuration "${COMPONENT_TYPE}.conf"; then
 558                 echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf"
 559                 exit 1
 560         fi
 561
 562         if [ -z "$M2_HOME" ]; then
 563                 echo "error: aborting ${COMPONENT_TYPE} installation: M2_HOME must be set in brmsgw.conf"
 564                 exit 1
 565         fi
 566
 567         echo "export M2_HOME=$M2_HOME" >>$POLICY_HOME/etc/profile.d/env.sh
 568
 569         /bin/cp -f "${POLICY_HOME}/install/servers/brmsgw/init.d/brmsgw" "${POLICY_HOME}/etc/init.d/brmsgw"
 570
 571         if ! /bin/mkdir -p "${POLICY_HOME}/servers/${COMPONENT_TYPE}" > /dev/null 2>&1; then
 572                 echo "error: aborting base installation: cannot create ${POLICY_HOME}/servers/${COMPONENT_TYPE}"
 573                 exit 1
 574         fi
 575
 576         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/BRMSGateway.jar "${POLICY_HOME}/servers/${COMPONENT_TYPE}"
 577         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/*.properties "${POLICY_HOME}/servers/${COMPONENT_TYPE}"
 578         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/config "${POLICY_HOME}/servers/${COMPONENT_TYPE}"
 579         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/dependency.json "${POLICY_HOME}/servers/${COMPONENT_TYPE}"
 580
 581         /bin/mv $POLICY_HOME/m2 $HOME/.m2
 582
 583         return 0
 584 }
 585
 586
 587 function install_logparser() {
 588         if [[ $DEBUG == y ]]; then
 589                 echo "-- ${FUNCNAME[0]} $@ --"
 590                 set -x
 591         fi
 592
 593         install_prereqs "${BASE_CONF}"
 594
 595         if ! process_configuration "${COMPONENT_TYPE}.conf"; then
 596                 echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf"
 597                 exit 1
 598         fi
 599
 600         LP_TARGET_DIR=${POLICY_HOME}/servers/${COMPONENT_TYPE}
 601         /bin/mkdir -p ${LP_TARGET_DIR}/bin > /dev/null 2>&1
 602         /bin/mkdir -p ${LP_TARGET_DIR}/logs > /dev/null 2>&1
 603
 604         # copy binaries, initialization script and configuration
 605         /bin/cp "${POLICY_HOME}"/install/servers/common/logparser/bin/*jar "${LP_TARGET_DIR}/bin"
 606         /bin/cp "${POLICY_HOME}/install/servers/common/logparser/init.d/logparserd" "${POLICY_HOME}/etc/init.d/${COMPONENT_TYPE}"
 607         /bin/cp "${POLICY_HOME}/install/servers/${COMPONENT_TYPE}/bin/parserlog.properties" "${LP_TARGET_DIR}/bin"
 608         /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/bin/config "${POLICY_HOME}/servers/${COMPONENT_TYPE}/bin"
 609
 610 }
 611
 612 #########################################################################
 613 ##
 614 ## script execution body
 615 ##
 616 #########################################################################
 617
 618
 619 OPERATION=none
 620 COMPONENT_TYPE=none
 621 DEBUG=n
 622
 623 BASE_CONF=base.conf
 624
 625 TOMCAT_PACKAGE_NAME=apache-tomcat-8.0.50
 626
 627 INSTALL_DIR="$(pwd)"
 628
 629 export POLICY_USER=$(/usr/bin/id -un)
 630
 631 # command line options parsing
 632 until [[ -z "$1" ]]; do
 633         case $1 in
 634                 -d|--debug)     DEBUG=y
 635                                                 set -x
 636                                                 ;;
 637                 -i|--install)   OPERATION=install
 638                                                 shift
 639                                                 COMPONENT_TYPE=$1
 640                                                 ;;
 641                 -c|--configure) OPERATION=configure
 642                                                 shift
 643                                                 COMPONENT_TYPE=$1
 644                                                 ;;
 645                 *)                              usage
 646                                                 exit 1
 647                                                 ;;
 648         esac
 649         shift
 650 done
 651
 652 # component-type validation
 653 case $COMPONENT_TYPE in
 654         base)   ;;
 655         pdp)    ;;
 656         pap)    ;;
 657         console)        ;;
 658         mysql)  ;;
 659         elk)    ;;
 660         brmsgw) ;;
 661         paplp)  ;;
 662         pdplp)  ;;
 663         skip)   ;;
 664         *)              echo "invalid component type (${COMPONENT_TYPE}): must be in {base|pdp|pap|console|mysql|elk|brmsgw|paplp|pdplp}";
 665                         usage
 666                         exit 1
 667                         ;;
 668 esac
 669
 670 # operation validation
 671 case $OPERATION in
 672         install|configure)      ;;
 673         *)              echo "invalid operation (${OPERATION}): must be in {install|configure}";
 674                         usage
 675                         exit 1
 676                         ;;
 677 esac
 678
 679 if [[ -n ${POLICY_GROUP} ]]; then
 680         groups=$(groups)
 681         if ! echo ${groups} | grep -qP "\b${POLICY_GROUP}"; then
 682                 echo "error: ${POLICY_GROUP} is not a valid group for account ${POLICY_USER}"
 683                 exit 1
 684         fi
 685 fi
 686
 687 if [[ -z ${POLICY_GROUP} ]]; then
 688         numGroups=$(groups | sed "s/^.*: *//g" | wc -w)
 689         if [ ${numGroups} -eq 1 ]; then
 690                 export POLICY_GROUP=$(groups ${POLICY_USER} | sed "s/^.*: *//g")
 691         else
 692                 echo "error: ${POLICY_USER} belongs to multiple groups, one group \
 693               must be provided for the installation"
 694                 usage
 695                 exit 1
 696         fi
 697 fi
 698
 699 if [[ -z ${POLICY_GROUP} ]]; then
 700         echo "error: installation of root section must not provide the \
 701               installation group owner argument."
 702         usage
 703         exit 1
 704 fi
 705
 706 if [[ -z ${POLICY_LOGS} ]]; then
 707     echo "POLICY_LOGS environment variable NOT set, default to /var/log/onap"
 708     export POLICY_LOGS="/var/log/onap"
 709 fi
 710
 711 FQDN=$(hostname -f 2> /dev/null)
 712 if [[ $? != 0 || -z ${FQDN} ]]; then
 713         echo "error: cannot determine the FQDN for this host $(hostname)."
 714         exit 1
 715 fi
 716
 717 if [[ ${OPERATION} == install ]]; then
 718         case $COMPONENT_TYPE in
 719                 base)
 720                         install_base
 721                         ;;
 722                 pdp)
 723                         install_tomcat_component
 724                         ;;
 725                 pap)
 726                         install_tomcat_component
 727                         ;;
 728                 console)
 729                         install_tomcat_component
 730                         ;;
 731                 mysql)
 732                         install_mysql
 733                         ;;
 734                 elk)
 735                         install_elk
 736                         ;;
 737                 brmsgw)
 738                         install_brmsgw
 739                         ;;
 740                 paplp|pdplp)
 741                         install_logparser
 742                         ;;
 743                 *)
 744                         echo "invalid component type (${COMPONENT_TYPE}): must be in {base|pdp|pap|console|mysql|elk|brmsgw|paplp|pdplp}";
 745                         usage
 746                         exit 1
 747                         ;;
 748         esac
 749 fi
 750 if [[ ${OPERATION} == configure ]]; then
 751
 752         install_prereqs "${BASE_CONF}"
 753
 754         case $COMPONENT_TYPE in
 755                 base)
 756                         configure_base
 757                         component_preconfigure
 758                         configure_keystore
 759                         ;;
 760                 pdp)
 761                         configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/"
 762                         ;;
 763                 pap)
 764                         configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/"
 765                         ;;
 766                 console)
 767                         configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/"
 768                         ;;
 769                 mysql)
 770                         configure_mysql
 771                         ;;
 772                 elk)
 773                         configure_elk
 774                         ;;
 775                 brmsgw)
 776                         configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/"
 777                         ;;
 778                 paplp|pdplp)
 779                         configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/"
 780                         ;;
 781                 *)
 782                         echo "invalid component type (${COMPONENT_TYPE}): must be in {base|pdp|pap|console|mysql|elk|brmsgw|paplp|pdplp}";
 783                         usage
 784                         exit 1
 785                         ;;
 786         esac
 787 fi
 788
 789
 790 echo -n "Successful ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} "
 791 echo "ownership with umask $(umask)."