Disabling policy retrieval for pci opt
[optf/osdf.git] / osdfapp.py
1 # -------------------------------------------------------------------------
2 #   Copyright (c) 2015-2017 AT&T Intellectual Property
3 #
4 #   Licensed under the Apache License, Version 2.0 (the "License");
5 #   you may not use this file except in compliance with the License.
6 #   You may obtain a copy of the License at
7 #
8 #       http://www.apache.org/licenses/LICENSE-2.0
9 #
10 #   Unless required by applicable law or agreed to in writing, software
11 #   distributed under the License is distributed on an "AS IS" BASIS,
12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 #   See the License for the specific language governing permissions and
14 #   limitations under the License.
15 #
16 # -------------------------------------------------------------------------
17 #
18
19 """
20 OSDF Manager Main Flask Application
21 """
22
23 import sys
24 from threading import Thread  # for scaling up, may need celery with RabbitMQ or redis
25
26 from flask import Flask, request, Response, g
27
28 import osdf
29 import pydevd
30 import json
31 import osdf.adapters.policy.interface
32 import osdf.config.credentials
33 import osdf.config.loader
34 import osdf.operation.error_handling
35 import osdf.operation.responses
36 import traceback
37 from osdf.adapters.policy.interface import get_policies
38 from osdf.config.base import osdf_config
39 from osdf.optimizers.placementopt.conductor.remote_opt_processor import process_placement_opt
40 from osdf.webapp.appcontroller import auth_basic
41 from optparse import OptionParser
42 from osdf.operation.exceptions import BusinessException
43 from osdf.operation.error_handling import request_exception_to_json_body, internal_error_message
44 from requests import RequestException
45 from schematics.exceptions import DataError
46 from osdf.logging.osdf_logging import MH, audit_log, error_log, debug_log
47 from osdf.models.api.placementRequest import PlacementAPI
48 from osdf.models.api.pciOptimizationRequest import PCIOptimizationAPI
49 from osdf.operation.responses import osdf_response_for_request_accept as req_accept
50 from osdf.optimizers.routeopt.simple_route_opt import RouteOpt
51 from osdf.optimizers.pciopt.pci_opt_processor import process_pci_optimation
52 from osdf.utils import api_data_utils
53
54 ERROR_TEMPLATE = osdf.ERROR_TEMPLATE
55
56 app = Flask(__name__)
57
58 BAD_CLIENT_REQUEST_MESSAGE = 'Client sent an invalid request'
59
60
61 @app.errorhandler(BusinessException)
62 def handle_business_exception(e):
63     """An exception explicitly raised due to some business rule"""
64     error_log.error("Synchronous error for request id {} {}".format(g.request_id, traceback.format_exc()))
65     err_msg = ERROR_TEMPLATE.render(description=str(e))
66     response = Response(err_msg, content_type='application/json; charset=utf-8')
67     response.status_code = 400
68     return response
69
70
71 @app.errorhandler(RequestException)
72 def handle_request_exception(e):
73     """Returns a detailed synchronous message to the calling client
74     when osdf fails due to a remote call to another system"""
75     error_log.error("Synchronous error for request id {} {}".format(g.request_id, traceback.format_exc()))
76     err_msg = request_exception_to_json_body(e)
77     response = Response(err_msg, content_type='application/json; charset=utf-8')
78     response.status_code = 400
79     return response
80
81
82 @app.errorhandler(DataError)
83 def handle_data_error(e):
84     """Returns a detailed message to the calling client when the initial synchronous message is invalid"""
85     error_log.error("Synchronous error for request id {} {}".format(g.request_id, traceback.format_exc()))
86
87     body_dictionary = {
88         "serviceException": {
89             "text": BAD_CLIENT_REQUEST_MESSAGE,
90             "exceptionMessage": str(e.errors),
91             "errorType": "InvalidClientRequest"
92         }
93     }
94
95     body_as_json = json.dumps(body_dictionary)
96     response = Response(body_as_json, content_type='application/json; charset=utf-8')
97     response.status_code = 400
98     return response
99
100
101 @app.route("/api/oof/v1/healthcheck", methods=["GET"])
102 def do_osdf_health_check():
103     """Simple health check"""
104     audit_log.info("A health check request is processed!")
105     return "OK"
106
107
108 @app.route("/api/oof/v1/placement", methods=["POST"])
109 @auth_basic.login_required
110 def do_placement_opt():
111     return placement_rest_api()
112
113
114 @app.route("/api/oof/placement/v1", methods=["POST"])
115 @auth_basic.login_required
116 def do_placement_opt_common_versioning():
117     return placement_rest_api()
118
119
120 def placement_rest_api():
121     """Perform placement optimization after validating the request and fetching policies
122     Make a call to the call-back URL with the output of the placement request.
123     Note: Call to Conductor for placement optimization may have redirects, so account for them
124     """
125     request_json = request.get_json()
126     req_id = request_json['requestInfo']['requestId']
127     g.request_id = req_id
128     audit_log.info(MH.received_request(request.url, request.remote_addr, json.dumps(request_json)))
129     api_version_info = api_data_utils.retrieve_version_info(request, req_id)
130     PlacementAPI(request_json).validate()
131     policies = get_policies(request_json, "placement")
132     audit_log.info(MH.new_worker_thread(req_id, "[for placement]"))
133     t = Thread(target=process_placement_opt, args=(request_json, policies, osdf_config))
134     t.start()
135     audit_log.info(MH.accepted_valid_request(req_id, request))
136     return req_accept(request_id=req_id,
137                       transaction_id=request_json['requestInfo']['transactionId'],
138                       version_info=api_version_info, request_status="accepted", status_message="")
139
140
141 @app.route("/api/oof/v1/route", methods=["POST"])
142 def do_route_calc():
143     """
144     Perform the basic route calculations and returnn the vpn-bindings
145     """
146     request_json = request.get_json()
147     audit_log.info("Calculate Route request received!")
148     src_access_node_id = ""
149     dst_access_node_id = ""
150     try:
151         src_access_node_id = request_json["srcPort"]["src-access-node-id"]
152         audit_log.info( src_access_node_id )
153         dst_access_node_id = request_json["dstPort"]["dst-access-node-id"]
154     except Exception as ex:
155         error_log.error("Exception while retriving the src and dst node info")
156     # for the case of request_json for same domain, return the same node with destination update
157     if src_access_node_id == dst_access_node_id:
158         audit_log.info("src and dst are same")
159         data = '{'\
160                 '"vpns":['\
161                     '{'\
162                         '"access-topology-id": "' + request_json["srcPort"]["src-access-topology-id"] + '",'\
163                         '"access-client-id": "' + request_json["srcPort"]["src-access-client-id"] + '",'\
164                         '"access-provider-id": "' + request_json["srcPort"]["src-access-provider-id"]+ '",'\
165                         '"access-node-id": "' + request_json["srcPort"]["src-access-node-id"]+ '",'\
166                         '"src-access-ltp-id": "' + request_json["srcPort"]["src-access-ltp-id"]+ '",'\
167                         '"dst-access-ltp-id": "' + request_json["dstPort"]["dst-access-ltp-id"]  +'"'\
168                     '}'\
169                 ']'\
170             '}'
171         return data
172     else:
173         return RouteOpt.getRoute(request_json)
174
175 @app.route("/api/oof/v1/pci", methods=["POST"])
176 @auth_basic.login_required
177 def do_pci_optimization():
178     request_json = request.get_json()
179     req_id = request_json['requestInfo']['requestId']
180     g.request_id = req_id
181     audit_log.info(MH.received_request(request.url, request.remote_addr, json.dumps(request_json)))
182     PCIOptimizationAPI(request_json).validate()
183     #disable policy retrieval
184     # policies = get_policies(request_json, "pciopt")
185     audit_log.info(MH.new_worker_thread(req_id, "[for pciopt]"))
186     t = Thread(target=process_pci_optimation, args=(request_json, osdf_config, None))
187     t.start()
188     audit_log.info(MH.accepted_valid_request(req_id, request))
189     return req_accept(request_id=req_id,
190                       transaction_id=request_json['requestInfo']['transactionId'],
191                       request_status="accepted", status_message="")
192
193
194 @app.errorhandler(500)
195 def internal_failure(error):
196     """Returned when unexpected coding errors occur during initial synchronous processing"""
197     error_log.error("Synchronous error for request id {} {}".format(g.request_id, traceback.format_exc()))
198     response = Response(internal_error_message, content_type='application/json; charset=utf-8')
199     response.status_code = 500
200     return response
201
202
203 def get_options(argv):
204     program_version_string = '%%prog %s' % "v1.0"
205     program_longdesc = ""
206     program_license = ""
207
208     parser = OptionParser(version=program_version_string, epilog=program_longdesc, description=program_license)
209     parser.add_option("-l", "--local", dest="local", help="run locally", action="store_true", default=False)
210     parser.add_option("-t", "--devtest", dest="devtest", help="run in dev/test environment", action="store_true",
211                       default=False)
212     parser.add_option("-d", "--debughost", dest="debughost", help="IP Address of host running debug server", default='')
213     parser.add_option("-p", "--debugport", dest="debugport", help="Port number of debug server", type=int, default=5678)
214     opts, args = parser.parse_args(argv)
215
216     if opts.debughost:
217         debug_log.debug('pydevd.settrace({}, port={})'.format(opts.debughost, opts.debugport))
218         pydevd.settrace(opts.debughost, port=opts.debugport)
219     return opts
220
221
222 if __name__ == "__main__":
223
224     sys_conf = osdf_config['core']['osdf_system']
225     ports = sys_conf['osdf_ports']
226     internal_port, external_port = ports['internal'], ports['external']
227
228     local_host = sys_conf['osdf_ip_default']
229     common_app_opts = dict(host=local_host, threaded=True, use_reloader=False)
230
231     ssl_opts = sys_conf.get('ssl_context')
232     if ssl_opts:
233         common_app_opts.update({'ssl_context': tuple(ssl_opts)})
234
235     opts = get_options(sys.argv)
236     if not opts.local and not opts.devtest:  # normal deployment
237         app.run(port=internal_port, debug=False, **common_app_opts)
238     else:
239         port = internal_port if opts.local else external_port
240         app.run(port=port, debug=True, **common_app_opts)