if not ctx.instance.runtime_properties.get('plugins_uploaded'):
try:
run(
- "cfy plugins upload https://nexus.onap.org/content/sites/raw/org.onap.ccsdk.platform.plugins/plugins/helm-3.0.0-py27-none-linux_x86_64.wgn -y https://nexus.onap.org/content/sites/raw/org.onap.ccsdk.platform.plugins/type_files/helm/1.1.0/helm-type.yaml")
+ "cfy plugins upload https://nexus.onap.org/content/sites/raw/org.onap.ccsdk.platform.plugins/plugins/helm-3.0.0-py27-none-linux_x86_64.wgn -y https://nexus.onap.org/content/sites/raw/org.onap.ccsdk.platform.plugins/type_files/helm/3.0.0/helm-type.yaml")
except Exception as e:
raise NonRecoverableError(str(e))
ctx.instance.runtime_properties['plugins_uploaded'] = plugins_upload()
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_cm:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_cm:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 800Mi
+ requests:
+ cpu: 20m
+ memory: 500Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 40m
+ memory: 600Mi
+ unlimited: {}
\ No newline at end of file
#################################################################
global:
nodePortPrefix: 302
-
+flavor: small
#################################################################
# Application configuration defaults.
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 10000Mi
+ requests:
+ cpu: 10m
+ memory: 8500Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 12000Mi
+ requests:
+ cpu: 40m
+ memory: 9000Mi
+ unlimited: {}
\ No newline at end of file
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_fs:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_fs:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 600Mi
+ requests:
+ cpu: 10m
+ memory: 300Mi
+ large:
+ limits:
+ cpu: 500m
+ memory: 700Mi
+ requests:
+ cpu: 100m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_gui:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_gui:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 100m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 200m
+ memory: 1Gi
+ requests:
+ cpu: 100m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_hello:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_hello:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 20m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines.
# persistence:
# mountPath: /dockerdata
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_locate:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_locate:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 600Mi
+ requests:
+ cpu: 20m
+ memory: 300Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 40m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_oauth:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_oauth:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 400Mi
+ requests:
+ cpu: 20m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 600Mi
+ requests:
+ cpu: 40m
+ memory: 200Mi
+ unlimited: {}
\ No newline at end of file
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_service:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_service:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 600Mi
+ requests:
+ cpu: 20m
+ memory: 300Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 40m
+ memory: 300Mi
+ unlimited: {}
\ No newline at end of file
- mountPath: /quorumclient/auth
name: {{ include "common.fullname" . }}-auth
resources:
-{{ include "common.resources" . | indent 12 }}
+{{ include "common.resources" . | indent 10 }}
{{- if .Values.nodeSelector }}
nodeSelector:
{{ toYaml .Values.nodeSelector | indent 10 }}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient:2.0.0
+image: onap/aaf/smsquorumclient:latest
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 10Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 700Mi
+ requests:
+ cpu: 10m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
- mountPath: /etc/localtime
name: localtime
readOnly: true
-
+ resources:
+{{ include "common.resources" . | indent 10 }}
- image: "{{ include "common.repository" . }}/{{ .Values.image.consul }}"
name: {{ include "common.name" . }}-backend
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- mountPath: /etc/localtime
name: localtime
readOnly: true
+ resources:
+{{ include "common.resources" . | indent 10 }}
volumes:
- name: {{ include "common.fullname" . }}-consuldata
persistentVolumeClaim:
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 10Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 700Mi
+ requests:
+ cpu: 10m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
- mountPath: /sms/auth
name: {{ include "common.fullname" . }}-auth
resources:
-{{ include "common.resources" . | indent 12 }}
+{{ include "common.resources" . | indent 10 }}
{{- if .Values.nodeSelector }}
nodeSelector:
{{ toYaml .Values.nodeSelector | indent 10 }}
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
persistence: {}
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/sms:2.0.0
+image: onap/aaf/sms:latest
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 10Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 10m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
persistence:
enabled: true
-
#################################################################
# Application configuration defaults.
#################################################################
csServiceName: aaf-cass
# gerrit branch where the latest aaf/auth/sample/public code exists
gerritProject: http://gerrit.onap.org/r/aaf/authz.git
- gerritBranch: master
+ gerritBranch: 2.0.0-ONAP
+flavor: small
# default number of instances
replicaCount: 1
mountPath: /dockerdata-nfs
mountSubPath: aaf/data
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 2
+ memory: 3Gi
+ requests:
+ cpu: 2
+ memory: 3Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 6Gi
+ requests:
+ cpu: 4
+ memory: 6Gi
+ unlimited: {}
--- /dev/null
+<!--
+ ============LICENSE_START=======================================================
+ org.onap.aai
+ ================================================================================
+ Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+ Copyright © 2018 Amdocs
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ ============LICENSE_END=========================================================
+-->
+<configuration scan="true" scanPeriod="3 seconds" debug="false">
+ <!--<jmxConfigurator /> -->
+ <!-- directory path for all other type logs -->
+
+ <property name="logDir" value="/var/log/onap" />
+
+ <!-- specify the component name -->
+ <property name="componentName" value="AAI-DR" />
+
+ <!-- default eelf log file names -->
+ <property name="generalLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="errorLogPattern" value="%d{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%mdc{RequestId}|%thread|data-router|%mdc{PartnerName}|%logger||%.-5level|%msg%n" />
+ <property name="auditMetricPattern" value="%m%n" />
+
+ <property name="logDirectory" value="${logDir}/${componentName}" />
+
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder>
+ <pattern>${errorLogPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <!-- ============================================================================ -->
+ <!-- EELF Appenders -->
+ <!-- ============================================================================ -->
+
+ <!-- The EELFAppender is used to record events to the general application
+ log -->
+
+ <appender name="EELF"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${generalLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${errorLogPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELF" />
+ </appender>
+
+ <!-- EELF Audit Appender. This appender is used to record audit engine
+ related logging events. The audit logger and appender are specializations
+ of the EELF application root logger and appender. This can be used to segregate
+ Policy engine events from other components, or it can be eliminated to record
+ these events as part of the application root log. -->
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${auditMetricPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+ <appender name="EELFMetrics"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} -
+ %msg%n"</pattern> -->
+ <pattern>${auditMetricPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${errorLogPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>false</includeCallerData>
+ </appender>
+
+ <!-- ============================================================================ -->
+ <!-- EELF loggers -->
+ <!-- ============================================================================ -->
+ <logger name="com.att.eelf" level="info" additivity="false">
+ <appender-ref ref="asyncEELF" />
+ <appender-ref ref="asyncEELFDebug" />
+ </logger>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="WARN" />
+ <logger name="org.springframework.beans" level="WARN" />
+ <logger name="org.springframework.web" level="WARN" />
+ <logger name="com.blog.spring.jms" level="WARN" />
+
+ <!-- Data Router service loggers -->
+ <logger name="org.onap.aai.data-router" level="INFO" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="net.sf" level="WARN" />
+ <logger name="org.apache" level="WARN" />
+ <logger name="org.apache.commons.httpclient" level="WARN" />
+ <logger name="org.apache.commons" level="WARN" />
+ <logger name="org.apache.coyote" level="WARN" />
+ <logger name="org.apache.jasper" level="WARN" />
+
+ <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging.
+ May aid in troubleshooting) -->
+ <logger name="org.apache.camel" level="WARN" />
+ <logger name="org.apache.cxf" level="WARN" />
+ <logger name="org.apache.camel.processor.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.service" level="WARN" />
+ <logger name="org.restlet" level="WARN" />
+ <logger name="org.apache.camel.component.restlet" level="WARN" />
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="WARN" />
+ <logger name="ch.qos.logback.core" level="WARN" />
+
+ <root>
+ <appender-ref ref="asyncEELF" />
+ <!-- <appender-ref ref="asyncEELFDebug" /> -->
+ </root>
+
+</configuration>
<property name="searchKeystore" value="tomcat_keystore" />
</bean>
- <bean id="consumerBeanEntityEvent" class="org.onap.aai.event.client.DMaaPEventConsumer " >
- <constructor-arg name="host" value="message-router.{{.Release.Namespace}}:3904" />
- <constructor-arg name="topic" value="AAI-EVENT" />
+ <bean id="consumerBeanEntityEvent" class="org.onap.aai.event.client.DMaaPEventConsumer" >
+ <constructor-arg name="host" value="message-router.{{.Release.Namespace}}:{{.Values.event.port.dmaap}}" />
+ <constructor-arg name="topic" value="{{.Values.event.consumer.topic}}" />
<constructor-arg name="username" value="" />
<constructor-arg name="password" value="" />
<constructor-arg name="consumerGroup" value="datarouter" />
<constructor-arg name="timeoutMs" value="1000" />
<constructor-arg name="messageLimit" value="100" />
<constructor-arg name="transportType" value="HTTPAUTH" />
+ <constructor-arg name="protocol" value="{{.Values.event.protocol}}" />
+ <constructor-arg name="contentType" value="application/json" />
</bean>
<bean id="entityEventPolicy" class="org.onap.aai.datarouter.policy.EntityEventPolicy" init-method="startup" >
data:
{{ tpl (.Files.Glob "resources/dynamic/routes/entity-event.route").AsConfig . | indent 2 }}
{{ tpl (.Files.Glob "resources/dynamic/conf/entity-event-policy.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-filebeat-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
\ No newline at end of file
- mountPath: /opt/app/data-router/dynamic/conf/entity-event-policy.xml
subPath: entity-event-policy.xml
name: {{ include "common.fullname" . }}-dynamic-policy
- - mountPath: /logs/
+ - mountPath: /opt/app/data-router/bundleconfig/etc/logback.xml
+ name: {{ include "common.fullname" . }}-logback-config
+ subPath: logback.xml
+ - mountPath: /var/log/onap
name: {{ include "common.fullname" . }}-logs
ports:
- containerPort: {{ .Values.service.internalPort }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
resources:
{{ include "common.resources" . | indent 12 }}
+
+ # side car containers
+ - name: filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ name: filebeat-conf
+ - mountPath: /var/log/onap
+ name: {{ include "common.fullname" . }}-logs
+ - mountPath: /usr/share/filebeat/data
+ name: aai-filebeat
volumes:
- name: localtime
hostPath:
path: /etc/localtime
+ - name: filebeat-conf
+ configMap:
+ name: aai-filebeat
+ - name: aai-filebeat
+ emptyDir: {}
- name: {{ include "common.fullname" . }}-auth
secret:
secretName: {{ include "common.fullname" . }}
configMap:
name: {{ include "common.fullname" . }}-dynamic
- name: {{ include "common.fullname" . }}-logs
- hostPath:
- path: {{ .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logback-config
+ configMap:
+ name: {{ include "common.fullname" . }}-log-configmap
+ items:
+ - key: logback.xml
+ path: logback.xml
restartPolicy: {{ .Values.global.restartPolicy | default .Values.restartPolicy }}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
# Declare variables to be passed into your templates.
global: # global defaults
nodePortPrefix: 302
-
+ loggingImage: beats/filebeat:5.5.0
# application image
repository: nexus3.onap.org:10001
requests:
cpu: 4
memory: 8Gi
- unlimited: {}
\ No newline at end of file
+ unlimited: {}
+
+# Entity Event route configuration
+event:
+ port:
+ dmaap: 3905
+ protocol: https
+ consumer:
+ topic: AAI-EVENT
"http": "https://drools:6969/healthcheck",
"method": "GET",
"header": {
- "Authorization": ["Basic aGVhbHRoY2hlY2s6emIhWHp0RzM0"],
+ "Authorization": ["Basic ZGVtb0BwZW9wbGUub3NhYWYub3JnOmRlbW8xMjM0NTYh"],
"Cache-Control": ["no-cache"],
"Content-Type": ["application/json"],
"Accept": ["application/json"]
target_entity : "deployment_handler"
# url of the deployment-handler service for policy-handler to direct the policy-updates to
# - expecting dns to resolve the hostname deployment-handler to ip address
- url : "http://deployment-handler:8188"
+ url : "https://deployment-handler:8443"
# limit the size of a single data segment for policy-update messages
# from policy-handler to deployment-handler in megabytes
max_msg_length_mb : 5
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.2
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.3
# DCAE component images to be deployed via Cloudify Manager
# Use to override default setting in blueprints
componentImages:
config_binding_service: onap/org.onap.dcaegen2.platform.configbinding.app-app:2.2.3
- datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:latest
+ datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.0.0
deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:3.0.2
holmes_rules: onap/holmes/rule-management:1.2.0-STAGING-latest
holmes_engine: onap/holmes/engine-management:1.2.0-STAGING-latest
periodSeconds: 10
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.1.0
+image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.1.2
# Resource Limit flavor -By Default using small
flavor: small
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 1Gi
+ requests:
+ cpu: 500m
+ memory: 500Mi
+ large:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ unlimited: {}
\ No newline at end of file
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 20m
+ memory: 100Mi
+ requests:
+ cpu: 10m
+ memory: 50Mi
+ large:
+ limits:
+ cpu: 40m
+ memory: 200Mi
+ requests:
+ cpu: 20m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_discovery:1.2.0-STAGING-latest
+image: onap/msb/msb_discovery:1.2.0-SNAPSHOT-latest
pullPolicy: Always
istioSidecar: true
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 400m
+ memory: 400Mi
+ requests:
+ cpu: 200m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 800m
+ memory: 800Mi
+ requests:
+ cpu: 400m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
pullPolicy: Always
istioSidecar: true
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 800Mi
+ requests:
+ cpu: 200m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
pullPolicy: Always
istioSidecar: true
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 100m
+ memory: 400Mi
+ requests:
+ cpu: 50m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 200m
+ memory: 800Mi
+ requests:
+ cpu: 100m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
resources:
small:
limits:
- cpu: 2
- memory: 4Gi
- requests:
cpu: 1
- memory: 2Gi
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 200Mi
large:
limits:
- cpu: 4
- memory: 8Gi
+ cpu: 1
+ memory: 1Gi
requests:
- cpu: 2
- memory: 4Gi
+ cpu: 20m
+ memory: 400Mi
unlimited: {}
enabled: false
consul:
enabled: false
+contrib:
+ enabled: false
dcaegen2:
enabled: false
dmaap:
enabled: false
policy:
enabled: false
+pomba:
+ enabled: false
portal:
enabled: false
robot:
enabled: false
consul:
enabled: false
+contrib:
+ enabled: false
dcaegen2:
enabled: false
dmaap:
ENGINE_MANAGEMENT_PORT=9696
ENGINE_MANAGEMENT_HOST=0.0.0.0
-ENGINE_MANAGEMENT_USER=@1b3rt
-ENGINE_MANAGEMENT_PASSWORD=31nst31n
+ENGINE_MANAGEMENT_USER=demo@people.osaaf.org
+ENGINE_MANAGEMENT_PASSWORD=demo123456!
# nexus repository
-# Copyright © 2017 Amdocs, Bell Canada, AT&T
+# Copyright © 2017-2018 Amdocs, Bell Canada, AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# See the License for the specific language governing permissions and
# limitations under the License.
-HEALTHCHECK_USER=healthcheck
-HEALTHCHECK_PASSWORD=zb!XztG34
+HEALTHCHECK_USER=demo@people.osaaf.org
+HEALTHCHECK_PASSWORD=demo123456!
echo
echo
-curl -vvv -k --silent --user @1b3rt:31nst31n -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools | python -m json.tool
+curl -vvv -k --silent --user "demo@people.osaaf.org:demo123456!" -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools | python -m json.tool
echo
echo
echo
-curl -v -k --silent --user @1b3rt:31nst31n -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools/facts/closedloop-amsterdam/org.onap.policy.controlloop.Params | python -m json.tool
+curl -v -k --silent --user "demo@people.osaaf.org:demo123456!" -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools/facts/closedloop-amsterdam/org.onap.policy.controlloop.Params | python -m json.tool
# See the License for the specific language governing permissions and
# limitations under the License.
-server.host={{ .Values.config.networkdiscoveryCtxBuilderHost }}
+server.host={{ .Values.global.networkdiscoveryCtxBuilderHost }}
basicauth.username={{ .Values.config.networkdiscoveryCtxBuilderUsername }}
basicauth.password={{ .Values.config.networkdiscoveryCtxBuilderPassword }}
server.port={{ .Values.config.ctxBuilderExternalPort }}
sdncCtxBuilderHost: pomba-sdncctxbuilder
sdncCtxBuilderUsername: admin
sdncCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30
- networkdiscoveryCtxBuilderHost: pomba-networkdiscoveryctxbuilder
networkdiscoveryCtxBuilderUsername: admin
networkdiscoveryCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30
ctxBuilderExternalPort: 9530
# Network Discovery Context Builder REST Service
networkDiscoveryCtxBuilder.httpProtocol={{ .Values.config.networkDiscoveryCtxBuilderHttpProtocol }}
+networkDiscoveryCtxBuilder.serviceName={{ .Values.global.networkdiscoveryCtxBuilderHost }}
networkDiscoveryCtxBuilder.port={{ .Values.config.networkDiscoveryCtxBuilderPort }}
# Basic Authorization credentials for Network Discovery Context Builder REST Service
networkDiscoveryCtxBuilder.userId={{ .Values.config.networkDiscoveryCtxBuilderUserId }}
rule {
name 'SDC-AAI-vnfc-type'
- category 'INVALID_VALUE'
+ category 'VNFC Consistency'
description 'Validate that each VNFC instance in AAI conforms to a VNFC type defined in SDC model'
errorText 'AAI VNFC instance includes non-specified type in design SDC model'
severity 'ERROR'
def aaiTypes = getVnfcTypes(slurper.parseText(aaiList.toString()))
// each type in AAI must exist in SDC
- return aaiTypes.containsAll(sdcTypes)
+ return sdcTypes.containsAll(aaiTypes)
'''
}
rule {
name 'SDC-AAI-vnfc-node-count'
- category 'INVALID_VALUE'
+ category 'VNFC Consistency'
description 'Validate that for each VNFC node defined in SDC model, there is at least one VNFC instance in AAI'
errorText 'Design has specified types but not all of them exist in AAI'
severity 'WARNING'
rule {
name 'SDC-AAI-vf-module-instance-check'
- category 'INVALID_VALUE'
+ category 'VF Consistency'
description 'Validate that each VF module instance in AAI conforms to a VF module defined in SDC service model'
errorText 'One or more AAI VF module instance(s) not defined in SDC model'
severity 'CRITICAL'
rule {
name 'NDCB-AAI-attribute-comparison'
- category 'INVALID_VALUE'
+ category 'Attribute Mismatch'
description 'Verify that all attributes in Network-Discovery are the same as in AAI'
errorText 'Error found with attribute "{0}"; value "{1}" does not exist in Network-Discovery'
severity 'ERROR'
loggingImage: beats/filebeat:5.5.0
repository: nexus3.onap.org:10001
dockerhubRepository: docker.io
+ networkdiscoveryCtxBuilderHost: pomba-networkdiscoveryctxbuilder
# application configuration
config:
--- /dev/null
+<?xml version='1.0' encoding='utf-8'?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<!-- Note: A "Server" is not itself a "Container", so you may not
+ define subcomponents such as "Valves" at this level.
+ Documentation at /docs/config/server.html
+ -->
+<Server port="8005" shutdown="SHUTDOWN">
+ <Listener className="org.apache.catalina.startup.VersionLoggerListener" />
+ <!-- Security listener. Documentation at /docs/config/listeners.html
+ <Listener className="org.apache.catalina.security.SecurityListener" />
+ -->
+ <!--APR library loader. Documentation at /docs/apr.html -->
+ <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
+ <!-- Prevent memory leaks due to use of particular java/javax APIs-->
+ <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
+ <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
+ <Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" />
+
+ <!-- Global JNDI resources
+ Documentation at /docs/jndi-resources-howto.html
+ -->
+ <GlobalNamingResources>
+ <!-- Editable user database that can also be used by
+ UserDatabaseRealm to authenticate users
+ -->
+ <Resource name="UserDatabase" auth="Container"
+ type="org.apache.catalina.UserDatabase"
+ description="User database that can be updated and saved"
+ factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
+ pathname="conf/tomcat-users.xml" />
+ </GlobalNamingResources>
+
+ <!-- A "Service" is a collection of one or more "Connectors" that share
+ a single "Container" Note: A "Service" is not itself a "Container",
+ so you may not define subcomponents such as "Valves" at this level.
+ Documentation at /docs/config/service.html
+ -->
+ <Service name="Catalina">
+
+ <!--The connectors can use a shared executor, you can define one or more named thread pools-->
+ <!--
+ <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
+ maxThreads="150" minSpareThreads="4"/>
+ -->
+
+
+ <!-- A "Connector" represents an endpoint by which requests are received
+ and responses are returned. Documentation at :
+ Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
+ Java AJP Connector: /docs/config/ajp.html
+ APR (HTTP/AJP) Connector: /docs/apr.html
+ Define a non-SSL/TLS HTTP/1.1 Connector on port 8080
+ -->
+ <Connector port="8080" protocol="HTTP/1.1"
+ connectionTimeout="20000"
+ redirectPort="8443" />
+ <!-- A "Connector" using the shared thread pool-->
+ <!--
+ <Connector executor="tomcatThreadPool"
+ port="8080" protocol="HTTP/1.1"
+ connectionTimeout="20000"
+ redirectPort="8443" />
+ -->
+ <!-- Define a SSL/TLS HTTP/1.1 Connector on port 8443
+ This connector uses the NIO implementation that requires the JSSE
+ style configuration. When using the APR/native implementation, the
+ OpenSSL style configuration is required as described in the APR/native
+ documentation -->
+ <!--
+ <Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol"
+ maxThreads="150" SSLEnabled="true" scheme="https" secure="true"
+ clientAuth="false" sslProtocol="TLS" />
+ -->
+
+ <Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol"
+ maxThreads="150" SSLEnabled="true" scheme="https" secure="true"
+ keystoreFile="keystoreONAP.keystore" keystorePass="{{ .Values.global.keypass }}"
+ clientAuth="false" sslProtocol="TLS" />
+
+ <!-- Define an AJP 1.3 Connector on port 8009 -->
+ <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
+
+
+ <!-- An Engine represents the entry point (within Catalina) that processes
+ every request. The Engine implementation for Tomcat stand alone
+ analyzes the HTTP headers included with the request, and passes them
+ on to the appropriate Host (virtual host).
+ Documentation at /docs/config/engine.html -->
+
+ <!-- You should set jvmRoute to support load-balancing via AJP ie :
+ <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
+ -->
+ <Engine name="Catalina" defaultHost="localhost">
+
+ <!--For clustering, please take a look at documentation at:
+ /docs/cluster-howto.html (simple how to)
+ /docs/config/cluster.html (reference documentation) -->
+ <!--
+ <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
+ -->
+
+ <!-- Use the LockOutRealm to prevent attempts to guess user passwords
+ via a brute-force attack -->
+ <Realm className="org.apache.catalina.realm.LockOutRealm">
+ <!-- This Realm uses the UserDatabase configured in the global JNDI
+ resources under the key "UserDatabase". Any edits
+ that are performed against this UserDatabase are immediately
+ available for use by the Realm. -->
+ <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
+ resourceName="UserDatabase"/>
+ </Realm>
+
+ <Host name="localhost" appBase="webapps"
+ unpackWARs="true" autoDeploy="true">
+
+ <!-- SingleSignOn valve, share authentication between web applications
+ Documentation at: /docs/config/valve.html -->
+ <!--
+ <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
+ -->
+
+ <!-- Access log processes all example.
+ Documentation at: /docs/config/valve.html
+ Note: The pattern used is equivalent to using pattern="common" -->
+ <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
+ prefix="localhost_access_log" suffix=".txt"
+ pattern="%h %l %u %t "%r" %s %b" />
+
+ </Host>
+ </Engine>
+ </Service>
+</Server>
\ No newline at end of file
heritage: {{ .Release.Service }}
data:
{{ tpl (.Files.Glob "resources/config/deliveries/properties/ONAPPORTAL/*").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/server/*").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/certs/*").AsConfig . | indent 2 }}
- ""
- -n
- ""
+ env:
+ - name: javax.net.ssl.keyStore
+ value: {{ .Values.global.env.tomcatDir }}/{{ .Values.global.truststoreFile}}
+ - name: javax.net.ssl.keyStorePassword
+ value: {{ .Values.global.keypass }}
+ - name: javax.net.ssl.trustStore
+ value: {{ .Values.global.env.tomcatDir }}/{{ .Values.global.truststoreFile}}
+ - name: javax.net.ssl.trustStorePassword
+ value: {{ .Values.global.keypass }}
ports:
- containerPort: {{ .Values.service.internalPort }}
- containerPort: {{ .Values.service.internalPort2 }}
- containerPort: {{ .Values.service.internalPort3 }}
+ - containerPort: {{ .Values.service.internalPort4 }}
{{- if eq .Values.liveness.enabled true }}
livenessProbe:
tcpSocket:
- name: properties-onapportal
mountPath: "{{ .Values.global.env.tomcatDir }}/webapps/ONAPPORTAL/WEB-INF/classes/logback.xml"
subPath: logback.xml
- - name: portal-tomcat-logs
- mountPath: "{{ .Values.global.env.tomcatDir }}/logs"
+ - name: properties-onapportal
+ mountPath: "{{ .Values.global.env.tomcatDir }}/conf/server.xml"
+ subPath: server.xml
+ - name: properties-onapportal
+ mountPath: "{{ .Values.global.env.tomcatDir }}/{{ .Values.global.keystoreFile}}"
+ subPath: {{ .Values.global.keystoreFile}}
+ - name: properties-onapportal
+ mountPath: "{{ .Values.global.env.tomcatDir }}/{{ .Values.global.truststoreFile}}"
+ subPath: {{ .Values.global.truststoreFile}}
- name: var-log-onap
mountPath: /var/log/onap
resources:
externalPort3: 8010
internalPort3: 8009
nodePort3: 14
+ externalPort4: 8443
+ internalPort4: 8443
+ nodePort4: 16
mariadb:
service:
portalPort: "8989"
# application's front end hostname. Must be resolvable on the client side environment
portalHostName: "portal.api.simpledemo.onap.org"
+ keystoreFile: "keystoreONAP.keystore"
+ truststoreFile: "keystoreONAPall.jks"
+ keypass: "changeit"
config:
logstashServiceName: log-ls
logstashPort: 5044
-
+
portal-mariadb:
nameOverride: portal-db
GLOBAL_DMAAP_DR_NODE_SERVER_PORT = "8080"
# DROOL server port and credentials
GLOBAL_DROOLS_SERVER_PORT = "9696"
-GLOBAL_DROOLS_USERNAME = "@1b3rt"
-GLOBAL_DROOLS_PASSWORD = "31nst31n"
+GLOBAL_DROOLS_USERNAME = "demo@people.osaaf.org"
+GLOBAL_DROOLS_PASSWORD = "demo123456!"
# log server config - NOTE: no log server is run in HEAT; only on OOM
GLOBAL_LOG_SERVER_PROTOCOL = "http"
GLOBAL_LOG_ELASTICSEARCH_PORT = "9200"
GLOBAL_POLICY_HEALTHCHECK_PORT = "6969"
GLOBAL_POLICY_AUTH = "dGVzdHBkcDphbHBoYTEyMw=="
GLOBAL_POLICY_CLIENTAUTH = "cHl0aG9uOnRlc3Q="
-GLOBAL_POLICY_USERNAME = "healthcheck"
-GLOBAL_POLICY_PASSWORD = "zb!XztG34"
+GLOBAL_POLICY_USERNAME = "demo@people.osaaf.org"
+GLOBAL_POLICY_PASSWORD = "demo123456!"
# portal info - everything is from the private oam network (also called onap private network)
GLOBAL_PORTAL_SERVER_PROTOCOL = "http"
GLOBAL_PORTAL_SERVER_PORT = "8989"
GLOBAL_INJECTED_OPENSTACK_PASSWORD = "{{ .Values.openStackPassword }}"
GLOBAL_INJECTED_OPENSTACK_TENANT_ID = "{{ .Values.openStackTenantId }}"
GLOBAL_INJECTED_OPENSTACK_USERNAME = "{{ .Values.openStackUserName }}"
+GLOBAL_INJECTED_OPENSTACK_PROJECT_NAME = "{{ .Values.openStackProjectName }}"
+GLOBAL_INJECTED_OPENSTACK_DOMAIN_ID = "{{ .Values.openStackDomainId }}"
+GLOBAL_INJECTED_OPENSTACK_KEYSTONE_API_VERSION = "{{ .Values.openStackKeystoneAPIVersion }}"
GLOBAL_INJECTED_POLICY_IP_ADDR = "pdp.{{include "common.namespace" .}}"
GLOBAL_INJECTED_POLICY_HEALTHCHECK_IP_ADDR = "drools.{{include "common.namespace" .}}"
GLOBAL_INJECTED_PORTAL_IP_ADDR = "portal-app.{{include "common.namespace" .}}"
"GLOBAL_INJECTED_OPENSTACK_PASSWORD" : "{{ .Values.openStackPassword }}",
"GLOBAL_INJECTED_OPENSTACK_TENANT_ID" : "{{ .Values.openStackTenantId }}",
"GLOBAL_INJECTED_OPENSTACK_USERNAME" : "{{ .Values.openStackUserName }}",
+ "GLOBAL_INJECTED_OPENSTACK_PROJECT_NAME" : "{{ .Values.openStackProjectName }}",
+ "GLOBAL_INJECTED_OPENSTACK_DOMAIN_ID" : "{{ .Values.openStackDomainId }}",
+ "GLOBAL_INJECTED_OPENSTACK_KEYSTONE_API_VERSION" : "{{ .Values.openStackKeystoneAPIVersion }}",
"GLOBAL_INJECTED_POLICY_IP_ADDR" : "pdp.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_POLICY_HEALTHCHECK_IP_ADDR" : "drools.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_PORTAL_IP_ADDR" : "portal-app.{{include "common.namespace" .}}",
openStackTenantId: "47899782ed714295b1151681fdfd51f5"
# username for Openstack tenant where VNFs will be spawned. Maps to GLOBAL_INJECTED_OPENSTACK_USERNAME
openStackUserName: "tenantUsername"
+# Project name of Openstack where VNFs will be spawned. Maps to GLOBAL_INJECTED_OPENSTACK_PROJECT_NAME
+openStackProjectName: "onap"
+# Domain id of openstack where VNFs will be deployed. Maps to GLOBAL_INJECTED_OPENSTACK_DOMAIN_ID
+openStackDomainId: "default"
+# Openstack Keystone API version. Valid values are [ v2.0, v3 ]. Maps to GLOBAL_INJECTED_OPENSTACK_KEYSTONE_API_VERSION
+openStackKeystoneAPIVersion: "v2.0"
# Openstack glance image name for Ubuntu 14. Maps to GLOBAL_INJECTED_UBUNTU_1404_IMAGE
ubuntu14Image: "Ubuntu_14_trusty"
# Openstack glance image name for Ubuntu 16. Maps to GLOBAL_INJECTED_UBUNTU_1604_IMAGE
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
data:
- mariadb.readwrite.host : {{ .Values.db_host | b64enc | quote}}
- mariadb.readwrite.port : {{ .Values.db_port | b64enc | quote}}
- mariadb.readwrite.rolename: {{ .Values.db_admin_username | b64enc | quote}}
- mariadb.readwrite.password: {{ .Values.db_admin_password | b64enc | quote}}
- mariadb.admin.rolename: {{ .Values.db_username | b64enc | quote}}
- mariadb.admin.password: {{ .Values.db_password | b64enc | quote}}
+ mariadb.readwrite.host : {{ .Values.db_host | b64enc | quote }}
+ mariadb.readwrite.port : {{ .Values.db_port | b64enc | quote }}
+ mariadb.readwrite.rolename: {{ .Values.db_username | b64enc | quote }}
+ mariadb.readwrite.password: {{ .Values.db_password | b64enc | quote }}
+ mariadb.admin.rolename: {{ .Values.db_admin_username| b64enc | quote }}
+ mariadb.admin.password: {{ .Values.db_admin_password | b64enc | quote }}
type: Opaque
# limitations under the License.
db_host: so-mariadb
db_port: "3306"
-db_admin_username: root
-db_admin_password: password
-db_username: root
-db_password: password
+db_admin_username: so_admin
+db_admin_password: so_Admin123
+db_username: so_user
+db_password: so_User123
+
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/catalog:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
-image: onap/vfc/db:1.1.0-STAGING-latest
+image: onap/vfc/db:latest
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/emsdriver:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/gvnfmdriver:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nfvo/svnfm/huawei:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/jujudriver:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/multivimproxy:1.0.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nfvo/svnfm/nokiav2:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 5000Mi
+ requests:
+ cpu: 100m
+ memory: 3000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 7000Mi
+ requests:
+ cpu: 200m
+ memory: 5000Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nfvo/svnfm/nokia:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nslcm:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/resmanagement:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/vnflcm:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/vnfmgr:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/vnfres:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/wfengine-activiti:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/wfengine-mgrservice:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/ztesdncdriver:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/ztevnfmdriver:1.1.0
pullPolicy: Always
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 100m
+ memory: 500Mi
+ requests:
+ cpu: 50m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 200m
+ memory: 1000Mi
+ requests:
+ cpu: 100m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
Code Review / oom.git / commitdiff