# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# limitations under the License.
apiVersion: v1
-description: ONAP DMaaP Data Router
-name: dmaap-data-router
-version: 1.0
+description: ONAP Common Design Studio
+name: cds
+version: 4.0.0
--- /dev/null
+# CDS
+
+## Introduction
+
+CDS stands for Common Design Studio. It helps developping service specific
+artifacts for pre instanciation and post configuration.
+
+Full description is on [ONAP Read the Doc](https://docs.onap.org/en/latest/submodules/ccsdk/cds.git/docs/index.html).
+
+Charts has an UI and blueprints processort and controllers.
+Trigger to enable it is on SDNC chart has of today.
+
+## Requirements
+
+CDS needs the following ONAP projects to work:
+
+- AAI
+- SO
+- SDC
+- SDNC
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
- name: common
version: ~4.x-0
repository: '@local'
- - name: mariadb-galera
- alias: mariadb
- version: ~4.x-0
- repository: '@local'
-
--- /dev/null
+# Copyright © 2018 Orange
+# Modifications Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ name: {{ include "common.fullname" . }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ env:
+ - name: HOST
+ value: 0.0.0.0
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ # side car containers
+ # - name: filebeat-onap
+ # image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ # imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ # volumeMounts:
+ # - mountPath: /usr/share/filebeat/filebeat.yml
+ # name: filebeat-conf
+ # subPath: filebeat.yml
+ # - mountPath: /home/esr/works/logs
+ # name: esr-server-logs
+ # - mountPath: /usr/share/filebeat/data
+ # name: esr-server-filebeat
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ # - name: filebeat-conf
+ # configMap:
+ # name: {{ include "common.fullname" . }}-esr-filebeat
+ # - name: esr-server-logs
+ # emptyDir: {}
+ # - name: esr-server-filebeat
+ # emptyDir: {}
+ # - name: esrserver-log
+ # configMap:
+ # name: {{ include "common.fullname" . }}-esr-esrserver-log
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada, Orange
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}-{{ .Values.service.internalPort }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Orange
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Global configuration defaults.
#################################################################
global:
- nodePortPrefix: 302
+ nodePortPrefix: 303
readinessRepository: oomk8s
- readinessImage: readiness-check:2.0.0
+ readinessImage: readiness-check:1.1.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
-#################################################################
-# Application configuration defaults.
-#################################################################
+subChartsOnly:
+ enabled: true
+
# application image
repository: nexus3.onap.org:10001
-image: onap/dmaap/datarouter-prov:2.0.0
+image: onap/ccsdk-cds-ui:1.0.0-STAGING-latest
pullPolicy: Always
-# flag to enable debugging - application support required
-debugEnabled: false
+# application configuration
+config:
-# application configuration - see parent values chart
# default number of instances
replicaCount: 1
# probe configuration parameters
liveness:
+ httpGet:
+ path: /
+ port: 3000
initialDelaySeconds: 30
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
enabled: true
readiness:
+ httpGet:
+ path: /ping
+ port: 3000
initialDelaySeconds: 30
periodSeconds: 10
-## Persist data to a persitent volume
-persistence:
- enabled: false
+service:
+ type: NodePort
+ portName: ui
+ name: cds
+ nodePort: 97
+ internalPort: 3000
ingress:
enabled: false
-
# Resource Limit flavor -By Default using small
flavor: small
# Segregation for Different environment (Small and Large)
resources:
small:
limits:
- cpu: 2000m
- memory: 4Gi
- requests:
- cpu: 500m
+ cpu: 1
memory: 1Gi
+ requests:
+ cpu: 10m
+ memory: 100Mi
large:
limits:
- cpu: 4000m
- memory: 8Gi
- requests:
- cpu: 1000m
+ cpu: 2
memory: 2Gi
+ requests:
+ cpu: 200m
+ memory: 200Mi
unlimited: {}
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# See the License for the specific language governing permissions and
# limitations under the License.
-make-dmaap: make-bus-controller make-message-router make-dmaap-data-router
+make-dmaap: make-bus-controller make-message-router make-dmaap-dr-node make-dmaap-dr-prov
make-bus-controller:
- cd charts && helm dep up dmaap-bus-controller && helm lint dmaap-bus-controller
+ cd components && helm dep up dmaap-bus-controller && helm lint dmaap-bus-controller
make-message-router:
- cd charts && helm dep up message-router && helm lint message-router
+ cd components && helm dep up message-router && helm lint message-router
-make-dmaap-data-router:
- cd charts && helm dep up dmaap-data-router && helm lint dmaap-data-router
+make-dmaap-dr-node:
+ cd components && helm dep up dmaap-dr-node && helm lint dmaap-dr-node
+
+make-dmaap-dr-prov:
+ cd components && helm dep up dmaap-dr-prov && helm lint dmaap-dr-prov
clean:
@find . -type f -name '*.tgz' -delete
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# DMaap Data Router Global config defaults.
-#################################################################
-global:
- env:
- name: AUTO
- ubuntuInitRepository: oomk8s
- ubuntuInitImage: ubuntu-init:1.0.0
- loggingDirectory: /opt/app/datartr/logs
-
- config:
-# dr provisioning server configuration
- dmaapDrProv:
- servicetype: NodePort
- name: dmaap-dr-prov
- externalPort: 8080
- externalPort2: 8443
- internalPort: 8080
- internalPort2: 8443
- portName: dr-prov-port
- portName2: dr-prov-port2
- nodePort: 59
- nodePort2: 69
-# dr node server configuration
- dmaapDrNode:
- servicetype: ClusterIP
- name: dmaap-dr-node
- externalPort: 8080
- externalPort2: 8443
- internalPort: 8080
- internalPort2: 8443
- portName: dr-node-port
- portName2: dr-node-port2
-# dr-prov db configuration
- dmaapDrDb:
- mariadbServiceName: dmaap-dr-db-svc
- mariadbServicePort: 3306
- mariadbContName: dmaap-dr-db
-
-# mariadb-galera configuration
-mariadb:
- name: dmaap-dr-db
- nameOverride: dmaap-dr-db
- replicaCount: 2
- config:
- mariadbRootPassword: datarouter
- userName: datarouter
- userPassword: datarouter
- mysqlDatabase: datarouter
- service:
- name: dmaap-dr-db-svc
- portName: dmaap-dr-db-svc
- nfsprovisionerPrefix: dmaap-dr-db
- persistence:
- size: 1Gi
- mountSubPath: data-router/dr-db-data
- disableNfsProvisioner: true
\ No newline at end of file
# application images
repository: nexus3.onap.org:10001
-image: onap/dmaap/buscontroller:1.0.26
+image: onap/dmaap/buscontroller:1.0.23
# application configuration
apiVersion: v1
description: ONAP DMaaP Data Router Node Server
name: dmaap-dr-node
-version: 1.0
+version: 4.0.0
--- /dev/null
+#
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 Nordix Foundation.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+#
+
+dependencies:
+ - name: common
+ version: ~4.x-0
+ repository: '@local'
#!/bin/sh
-dr_prov_url="{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.internalPort2}}"
+dr_prov_url="{{.Values.config.dmaapDrProv.name}}:{{.Values.config.dmaapDrProv.internalPort2}}"
ct_header="Content-Type:application/vnd.dmaap-dr.feed"
obo_header="X-DMAAP-DR-ON-BEHALF-OF:dradmin"
feed_payload=/opt/app/datartr/etc/dedicatedFeed.json
# URL to retrieve dynamic configuration
#
#ProvisioningURL: ${DRTR_PROV_INTURL}
-ProvisioningURL=https://{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.externalPort2}}/internal/prov
+ProvisioningURL=https://{{.Values.config.dmaapDrProv.name}}:{{.Values.config.dmaapDrProv.externalPort2}}/internal/prov
#
# URL to upload PUB/DEL/EXP logs
#
#LogUploadURL: ${DRTR_LOG_URL}
-LogUploadURL=https://{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.externalPort2}}/internal/logs
+LogUploadURL=https://{{.Values.config.dmaapDrProv.name}}:{{.Values.config.dmaapDrProv.externalPort2}}/internal/logs
#
# The port number for http as seen within the server
#
#IntHttpPort: ${DRTR_NODE_INTHTTPPORT:-8080}
-IntHttpPort={{.Values.global.config.dmaapDrNode.internalPort}}
+IntHttpPort={{.Values.config.dmaapDrNode.internalPort}}
#
# The port number for https as seen within the server
#
-IntHttpsPort={{.Values.global.config.dmaapDrNode.internalPort2}}
+IntHttpsPort={{.Values.config.dmaapDrNode.internalPort2}}
#
# The external port number for https taking port mapping into account
#
#
# The password for the https keystore
#
-KeyStorePassword=4*&GD+w58RUM]01No.CYY;z6
+KeyStorePassword=]3V)($O&.Mv]W{f8^]6SxGNL
#
# The password for the private key in the https keystore
#
-KeyPassword=4*&GD+w58RUM]01No.CYY;z6
+KeyPassword=]3V)($O&.Mv]W{f8^]6SxGNL
#
# The type of truststore for https
#
#
# The password for the https truststore
#
-TrustStorePassword=UDXlT6Iu[F)k,Htk92+B,0Xj
+TrustStorePassword=(Rd,&{]%ePdp}4JZjqoJ2G+g
#
# The path to the file used to trigger an orderly shutdown
#
{{- range .Values.ingress.hosts }}
http://{{ . }}
{{- end }}
-{{- else if contains "NodePort" .Values.global.config.dmaapDrNode.servicetype }}
+{{- else if contains "NodePort" .Values.config.dmaapDrNode.servicetype }}
export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.global.config.dmaapDrNode.servicetype }}
+{{- else if contains "LoadBalancer" .Values.config.dmaapDrNode.servicetype }}
NOTE: It may take a few minutes for the LoadBalancer IP to be available.
You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{.Values.global.config.dmaapDrNode.externalPort}}
-{{- else if contains "ClusterIP" .Values.global.config.dmaapDrNode.servicetype }}
+ echo http://$SERVICE_IP:{{.Values.config.dmaapDrNode.externalPort}}
+{{- else if contains "ClusterIP" .Values.config.dmaapDrNode.servicetype }}
export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{.Values.global.config.dmaapDrNode.internalPort}}
+ kubectl port-forward $POD_NAME 8080:{{.Values.config.dmaapDrNode.internalPort}}
{{- end }}
\ No newline at end of file
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
- hostname: {{.Values.global.config.dmaapDrNode.name}}
+ hostname: {{.Values.config.dmaapDrNode.name}}
initContainers:
- name: {{ include "common.name" . }}-readiness
image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
- /root/ready.py
args:
- --container-name
- - {{.Values.global.config.dmaapDrProv.name}}
+ - dmaap-dr-prov
env:
- name: NAMESPACE
valueFrom:
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- - containerPort: {{.Values.global.config.dmaapDrNode.externalPort}}
- - containerPort: {{.Values.global.config.dmaapDrNode.externalPort2}}
+ - containerPort: {{.Values.config.dmaapDrNode.externalPort}}
+ - containerPort: {{.Values.config.dmaapDrNode.externalPort2}}
{{- if eq .Values.liveness.enabled true }}
livenessProbe:
tcpSocket:
- port: {{.Values.global.config.dmaapDrNode.internalPort}}
+ port: {{.Values.config.dmaapDrNode.internalPort}}
initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
periodSeconds: {{ .Values.liveness.periodSeconds }}
{{ end -}}
readinessProbe:
tcpSocket:
- port: {{.Values.global.config.dmaapDrNode.internalPort}}
+ port: {{.Values.config.dmaapDrNode.internalPort}}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
volumeMounts:
apiVersion: v1
kind: Service
metadata:
- name: {{.Values.global.config.dmaapDrNode.name}}
+ name: {{.Values.config.dmaapDrNode.name}}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
annotations:
service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
spec:
- type: {{.Values.global.config.dmaapDrNode.servicetype}}
+ type: {{.Values.config.dmaapDrNode.servicetype}}
ports:
- {{if eq .Values.global.config.dmaapDrNode.servicetype "NodePort" -}}
- - port: {{.Values.global.config.dmaapDrNode.externalPort}}
- targetPort: {{.Values.global.config.dmaapDrNode.internalPort}}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrNode.nodePort}}
- name: {{.Values.global.config.dmaapDrNode.name}}
- - port: {{.Values.global.config.dmaapDrNode.externalPort2}}
- targetPort: {{.Values.global.config.dmaapDrNode.internalPort2}}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrNode.nodePort2}}
- name: {{.Values.global.config.dmaapDrNode.name}}2
+ {{if eq .Values.config.dmaapDrNode.servicetype "NodePort" -}}
+ - port: {{.Values.config.dmaapDrNode.externalPort}}
+ targetPort: {{.Values.config.dmaapDrNode.internalPort}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrNode.nodePort}}
+ name: {{.Values.config.dmaapDrNode.name}}
+ - port: {{.Values.config.dmaapDrNode.externalPort2}}
+ targetPort: {{.Values.config.dmaapDrNode.internalPort2}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrNode.nodePort2}}
+ name: {{.Values.config.dmaapDrNode.name}}2
{{- else -}}
- - port: {{.Values.global.config.dmaapDrNode.externalPort}}
- targetPort: {{.Values.global.config.dmaapDrNode.internalPort}}
- name: {{.Values.global.config.dmaapDrNode.name}}
- - port: {{.Values.global.config.dmaapDrNode.externalPort2}}
- targetPort: {{.Values.global.config.dmaapDrNode.internalPort2}}
- name: {{.Values.global.config.dmaapDrNode.name}}2
+ - port: {{.Values.config.dmaapDrNode.externalPort}}
+ targetPort: {{.Values.config.dmaapDrNode.internalPort}}
+ name: {{.Values.config.dmaapDrNode.name}}
+ - port: {{.Values.config.dmaapDrNode.externalPort2}}
+ targetPort: {{.Values.config.dmaapDrNode.internalPort2}}
+ name: {{.Values.config.dmaapDrNode.name}}2
{{- end}}
selector:
app: {{ include "common.name" . }}
readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
+ loggingDirectory: /opt/app/datartr/logs
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/dmaap/datarouter-node:2.0.0
+image: onap/dmaap/datarouter-node:2.0.1
pullPolicy: Always
# flag to enable debugging - application support required
cpu: 1000m
memory: 2Gi
unlimited: {}
+
+config:
+ # dr node server configuration
+ dmaapDrNode:
+ servicetype: ClusterIP
+ name: dmaap-dr-node
+ externalPort: 8080
+ externalPort2: 8443
+ internalPort: 8080
+ internalPort2: 8443
+ portName: dr-node-port
+ portName2: dr-node-port2
+
+# dr provisioning server configuration
+ dmaapDrProv:
+ name: dmaap-dr-prov
+ externalPort2: 8443
+ internalPort2: 8443
apiVersion: v1
description: ONAP DMaaP Data Router Provisioning Server
name: dmaap-dr-prov
-version: 1.0
+version: 4.0.0
--- /dev/null
+#
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 Nordix Foundation.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+#
+
+dependencies:
+ - name: common
+ version: ~4.x-0
+ repository: '@local'
+ - name: mariadb-galera
+ alias: mariadb
+ version: ~4.x-0
+ repository: '@local'
\ No newline at end of file
#Jetty Server properties
-org.onap.dmaap.datarouter.provserver.http.port = {{.Values.global.config.dmaapDrProv.externalPort}}
-org.onap.dmaap.datarouter.provserver.https.port = {{.Values.global.config.dmaapDrProv.externalPort2}}
+org.onap.dmaap.datarouter.provserver.http.port = {{.Values.config.dmaapDrProv.externalPort}}
+org.onap.dmaap.datarouter.provserver.https.port = {{.Values.config.dmaapDrProv.externalPort2}}
org.onap.dmaap.datarouter.provserver.https.relaxation = true
-org.onap.dmaap.datarouter.provserver.keymanager.password = Qgw77oaQcdP*F8Pwa[&.,.Ab
+org.onap.dmaap.datarouter.provserver.keymanager.password = AT{];bvaDiytVD&oWhMZj0N5
org.onap.dmaap.datarouter.provserver.keystore.type = jks
org.onap.dmaap.datarouter.provserver.keystore.path = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks
-org.onap.dmaap.datarouter.provserver.keystore.password = Qgw77oaQcdP*F8Pwa[&.,.Ab
+org.onap.dmaap.datarouter.provserver.keystore.password = AT{];bvaDiytVD&oWhMZj0N5
org.onap.dmaap.datarouter.provserver.truststore.path = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks
-org.onap.dmaap.datarouter.provserver.truststore.password = 9M?)?:KAj1z6gpLhNrVUG@0T
+org.onap.dmaap.datarouter.provserver.truststore.password = ljlS@Y}0]{UO(TnwvEWkgJ%]
org.onap.dmaap.datarouter.provserver.accesslog.dir = /opt/app/datartr/logs
org.onap.dmaap.datarouter.provserver.spooldir = /opt/app/datartr/spool
org.onap.dmaap.datarouter.provserver.dbscripts = /opt/app/datartr/etc/misc
# Database access
org.onap.dmaap.datarouter.db.driver = org.mariadb.jdbc.Driver
-org.onap.dmaap.datarouter.db.url = jdbc:mariadb://{{.Values.global.config.dmaapDrDb.mariadbServiceName}}:{{.Values.global.config.dmaapDrDb.mariadbServicePort}}/datarouter
+org.onap.dmaap.datarouter.db.url = jdbc:mariadb://{{.Values.config.dmaapDrDb.mariadbServiceName}}:{{.Values.config.dmaapDrDb.mariadbServicePort}}/datarouter
org.onap.dmaap.datarouter.db.login = datarouter
org.onap.dmaap.datarouter.db.password = datarouter
{{- range .Values.ingress.hosts }}
http://{{ . }}
{{- end }}
-{{- else if contains "NodePort" .Values.global.config.dmaapDrProv.servicetype }}
+{{- else if contains "NodePort" .Values.config.dmaapDrProv.servicetype }}
export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.global.config.dmaapDrProv.servicetype }}
+{{- else if contains "LoadBalancer" .Values.config.dmaapDrProv.servicetype }}
NOTE: It may take a few minutes for the LoadBalancer IP to be available.
You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{.Values.global.config.dmaapDrProv.externalPort}}
-{{- else if contains "ClusterIP" .Values.global.config.dmaapDrProv.servicetype }}
+ echo http://$SERVICE_IP:{{.Values.config.dmaapDrProv.externalPort}}
+{{- else if contains "ClusterIP" .Values.config.dmaapDrProv.servicetype }}
export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{.Values.global.config.dmaapDrProv.internalPort}}
+ kubectl port-forward $POD_NAME 8080:{{.Values.config.dmaapDrProv.internalPort}}
{{- end }}
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
- hostname: {{.Values.global.config.dmaapDrProv.name}}
+ hostname: {{.Values.config.dmaapDrProv.name}}
initContainers:
- command:
- /root/ready.py
args:
- --container-name
- - {{.Values.global.config.dmaapDrDb.mariadbContName}}
+ - {{.Values.config.dmaapDrDb.mariadbContName}}
env:
- name: NAMESPACE
valueFrom:
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- - containerPort: {{.Values.global.config.dmaapDrProv.externalPort}}
- - containerPort: {{.Values.global.config.dmaapDrProv.externalPort2}}
+ - containerPort: {{.Values.config.dmaapDrProv.externalPort}}
+ - containerPort: {{.Values.config.dmaapDrProv.externalPort2}}
{{- if eq .Values.liveness.enabled true }}
livenessProbe:
tcpSocket:
- port: {{.Values.global.config.dmaapDrProv.externalPort}}
+ port: {{.Values.config.dmaapDrProv.externalPort}}
initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
periodSeconds: {{ .Values.liveness.periodSeconds }}
{{ end -}}
readinessProbe:
tcpSocket:
- port: {{.Values.global.config.dmaapDrProv.externalPort}}
+ port: {{.Values.config.dmaapDrProv.externalPort}}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
volumeMounts:
apiVersion: v1
kind: Service
metadata:
- name: {{.Values.global.config.dmaapDrProv.name}}
+ name: {{.Values.config.dmaapDrProv.name}}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
msb.onap.org/service-info: '[
{
- "serviceName": "{{.Values.global.config.dmaapDrProv.name}}",
+ "serviceName": "{{.Values.config.dmaapDrProv.name}}",
"version": "v1",
"url": "/",
"protocol": "REST",
- "port": "{{.Values.global.config.dmaapDrProv.externalPort}}",
+ "port": "{{.Values.config.dmaapDrProv.externalPort}}",
"visualRange":"1"
}
]'
spec:
- type: {{.Values.global.config.dmaapDrProv.servicetype}}
+ type: {{.Values.config.dmaapDrProv.servicetype}}
ports:
- {{if eq .Values.global.config.dmaapDrProv.servicetype "NodePort" -}}
- - port: {{.Values.global.config.dmaapDrProv.externalPort}}
- targetPort: {{.Values.global.config.dmaapDrProv.internalPort}}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrProv.nodePort}}
- name: {{.Values.global.config.dmaapDrProv.name}}
- - port: {{.Values.global.config.dmaapDrProv.externalPort2}}
- targetPort: {{.Values.global.config.dmaapDrProv.internalPort2}}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrProv.nodePort2}}
- name: {{.Values.global.config.dmaapDrProv.name}}2
+ {{if eq .Values.config.dmaapDrProv.servicetype "NodePort" -}}
+ - port: {{.Values.config.dmaapDrProv.externalPort}}
+ targetPort: {{.Values.config.dmaapDrProv.internalPort}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrProv.nodePort}}
+ name: {{.Values.config.dmaapDrProv.name}}
+ - port: {{.Values.config.dmaapDrProv.externalPort2}}
+ targetPort: {{.Values.config.dmaapDrProv.internalPort2}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrProv.nodePort2}}
+ name: {{.Values.config.dmaapDrProv.name}}2
{{- else -}}
- - port: {{.Values.global.config.dmaapDrProv.externalPort}}
- targetPort: {{.Values.global.config.dmaapDrProv.internalPort}}
- name: {{.Values.global.config.dmaapDrProv.name}}
- - port: {{.Values.global.config.dmaapDrProv.externalPort2}}
- targetPort: {{.Values.global.config.dmaapDrProv.internalPort2}}
- name: {{.Values.global.config.dmaapDrProv.name}}2
+ - port: {{.Values.config.dmaapDrProv.externalPort}}
+ targetPort: {{.Values.config.dmaapDrProv.internalPort}}
+ name: {{.Values.config.dmaapDrProv.name}}
+ - port: {{.Values.config.dmaapDrProv.externalPort2}}
+ targetPort: {{.Values.config.dmaapDrProv.internalPort2}}
+ name: {{.Values.config.dmaapDrProv.name}}2
{{- end}}
selector:
app: {{ include "common.name" . }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+ loggingDirectory: /opt/app/datartr/logs
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dmaap/datarouter-prov:2.0.1
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration - see parent values chart
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: false
+
+ingress:
+ enabled: false
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 2000m
+ memory: 4Gi
+ requests:
+ cpu: 500m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 4000m
+ memory: 8Gi
+ requests:
+ cpu: 1000m
+ memory: 2Gi
+ unlimited: {}
+
+config:
+ # dr provisioning server configuration
+ dmaapDrProv:
+ servicetype: NodePort
+ name: dmaap-dr-prov
+ externalPort: 8080
+ externalPort2: 8443
+ internalPort: 8080
+ internalPort2: 8443
+ portName: dr-prov-port
+ portName2: dr-prov-port2
+ nodePort: 59
+ nodePort2: 69
+ # dr-prov db configuration
+ dmaapDrDb:
+ mariadbServiceName: dmaap-dr-db-svc
+ mariadbServicePort: 3306
+ mariadbContName: dmaap-dr-db
+
+# mariadb-galera configuration
+mariadb:
+ name: dmaap-dr-db
+ nameOverride: dmaap-dr-db
+ replicaCount: 2
+ config:
+ mariadbRootPassword: datarouter
+ userName: datarouter
+ userPassword: datarouter
+ mysqlDatabase: datarouter
+ service:
+ name: dmaap-dr-db-svc
+ portName: dmaap-dr-db-svc
+ nfsprovisionerPrefix: dmaap-dr-db
+ persistence:
+ size: 1Gi
+ mountSubPath: data-router/dr-db-data
+ disableNfsProvisioner: true
\ No newline at end of file
- name: common
version: ~4.x-0
repository: '@local'
+ - name: message-router
+ version: ~4.x-0
+ repository: 'file://components/message-router'
+ condition: message-router.enabled
+ - name: dmaap-bus-controller
+ version: ~4.x-0
+ repository: 'file://components/dmaap-bus-controller'
+ condition: dmaap-bus-controller.enabled
+ - name: dmaap-dr-node
+ version: ~4.x-0
+ repository: 'file://components/dmaap-dr-node'
+ condition: dmaap-dr-node.enabled
+ - name: dmaap-dr-prov
+ version: ~4.x-0
+ repository: 'file://components/dmaap-dr-prov'
+ condition: dmaap-dr-prov.enabled
config:
logstashServiceName: log-ls
logstashPort: 5044
+
+message-router:
+ enabled: true
+dmaap-bus-controller:
+ enabled: true
+dmaap-dr-node:
+ enabled: true
+dmaap-dr-prov:
+ enabled: true
\ No newline at end of file
# See the License for the specific language governing permissions and
# limitations under the License.
+# JVM options
+
+JVM_OPTIONS=-server -Xms1024m -Xmx2048m
+
# SYSTEM software configuration
POLICY_HOME=/opt/app/policy
PDPD_CONFIGURATION_CONSUMER_INSTANCE=
PDPD_CONFIGURATION_PARTITION_KEY=
+# PAP-PDP configuration channel
+
+POLICY_PDP_PAP_TOPIC=POLICY-PDP-PAP
+POLICY_PDP_PAP_API_KEY=
+POLICY_PDP_PAP_API_SECRET=
+
# PAP
PAP_HOST={{.Values.global.pap.nameOverride}}
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP Policy Design API
+name: policy-api
+version: 4.0.0
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+dependencies:
+ - name: common
+ version: ~4.x-0
+ repository: '@local'
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+{
+ "name":"ApiGroup",
+ "restServerParameters":{
+ "host":"0.0.0.0",
+ "port":6969,
+ "userName":"healthcheck",
+ "password":"zb!XztG34"
+ }
+}
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/config.json").AsConfig . | indent 2 }}
--- /dev/null
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/opt/app/policy/api/bin/policy-api.sh"]
+ args: ["/opt/app/policy/api/etc/mounted/config.json"]
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /opt/app/policy/api/etc/mounted
+ name: apiconfig
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: apiconfig
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ defaultMode: 0755
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.internalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 304
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/policy-api:2.0.0-SNAPSHOT-latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 20
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 20
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: policy-api
+ portName: policy-api
+ internalPort: 6969
+ nodePort: 40
+
+ingress:
+ enabled: false
+
+resources: {}
http.userId={{ .Values.config.httpUserId }}
http.password={{ .Values.config.httpPassword }}
-aai.searchNodeQuery=/aai/v13/search/nodes-query?search-node-type=service-instance&filter=service-instance-id:EQUALS:
+aai.searchNodeQuery=/aai/v13/nodes/service-instance/{0}
#Servlet context parameters
server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
-<configuration>\r
- <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>\r
- <property name="p_lvl" value="%level"/>\r
- <property name="p_log" value="%logger"/>\r
- <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>\r
- <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
- <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
- <!-- tabs -->\r
- <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
- <property name="p_thr" value="%thread"/>\r
- <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>\r
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">\r
- <encoder>\r
- <pattern>${pattern}</pattern>\r
- </encoder>\r
- </appender>\r
- <appender name="FILE" class="ch.qos.logback.core.FileAppender">\r
- <file>output.log</file>\r
- <encoder>\r
- <pattern>${pattern}</pattern>\r
- </encoder>\r
- </appender>\r
- <logger level="INFO" name="org.onap.logging.ref.slf4j" additivity="false">\r
- <appender-ref ref="STDOUT" />\r
- <appender-ref ref="FILE" />\r
- </logger>\r
- <root level="INFO">\r
- <appender-ref ref="STDOUT" />\r
- </root>\r
-</configuration>\r
+<configuration>
+ <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <!-- tabs -->
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="FILE" class="ch.qos.logback.core.FileAppender">
+ <file>logs/EELF/output.log</file>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <logger level="INFO" name="org.onap.logging.ref.slf4j" additivity="false">
+ <appender-ref ref="STDOUT" />
+ <appender-ref ref="FILE" />
+ </logger>
+ <root level="INFO">
+ <appender-ref ref="STDOUT" />
+ <appender-ref ref="FILE" />
+ </root>
+</configuration>
\ No newline at end of file
- name: common
version: ~4.x-0
repository: '@local'
- - name: controller-blueprints
+ - name: cds
version: ~4.x-0
repository: '@local'
+ condition: cds.enabled
- name: mysql
version: ~4.x-0
repository: '@local'
javaHome: /usr/lib/jvm/java-1.8-openjdk
# dependency / sub-chart configuration
+cds:
+ enabled: true
+
dmaap-listener:
nameOverride: sdnc-dmaap-listener
config:
retrycount: 5
retryinterval: -15
retrylist: 408,429,500,502,503,504,900
+ encryptionKey: 07a7159d3bf51a0e53be7a8f89699be7
tenant:
default_keystone_url_version: /v2.0
default_keystone_reg_ex: "/[vV][0-9]"
max-total: 20
validation-query: select 1
test-on-borrow: true
+org:
+ onap:
+ so:
+ cloud-owner: onap
+ adapters:
+ network:
+ encryptionKey: 07a7159d3bf51a0e53be7a8f89699be7