#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
mountPath: /dockerdata-nfs
mountSubPath: aai/data-router/logs
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
+
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Release.Namespace}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
enableClustering: true
configDir: /opt/onap/appc/data/properties
dmaapTopic: SUCCESS
+ logstashServiceName: log-ls
+ logstashPort: 5044
mysql:
nameOverride: appc-db
+++ /dev/null
-DCAE Port mapping
------------------------------------------------------------------------------------------
-Container name | Connector name | Node port | Target port |
------------------------------------------------------------------------------------------
-dcae-collector-common-event | dcae-ce1 | 30236 | 8080 |
------------------------------------------------------------------------------------------
- | dcae-ce2 | 30237 | 8443 |
------------------------------------------------------------------------------------------
- | dcae-ce3 | 30238 | 9999 |
------------------------------------------------------------------------------------------
-dcae-collector-dmaapbc | dcae-bc1 | 30239 | 8080 |
------------------------------------------------------------------------------------------
- | dcae-bc2 | 30240 | 8443 |
------------------------------------------------------------------------------------------
-dcae-ves-collector | dcae-ves1 | 30241 | 8080 |
------------------------------------------------------------------------------------------
- | dcae-ves2 | 30242 | 9999 |
------------------------------------------------------------------------------------------
+++ /dev/null
-#!/bin/bash
-set -x
-
-export DEBIAN_FRONTEND=noninteractive
-
-##############################################################
-################### File provisioning ########################
-##############################################################
-
-cd /tmp
-
-
-## Adding configuration file: mount_config
-cat > /tmp/dcae-mount.conf << EOF_CONFIG
-osType: ubuntu
-volumes:
- ephemeral:
- uuid: ephemeral
- size: 80
- filesystems:
- /opt/tools:
- size: 80
- type: ext4
- mount_opts: ''
- data:
- uuid: cinder
- size: 75
- filesystems:
- /opt/data:
- size: 75
- type: ext4
- mount_opts: ''
-EOF_CONFIG
-
-
-## Adding configuration file: ecomp-nexus
-cat > /tmp/ecomp-nexus.crt << EOF_CONFIG
------BEGIN CERTIFICATE-----
-MIIFRTCCBC2gAwIBAgIQM/5eM8D0jY3yHTSyN5iO9zANBgkqhkiG9w0BAQsFADCB
-kDELMAkGA1UEBhMCR0IxGzAZBgNVBAgTEkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4G
-A1UEBxMHU2FsZm9yZDEaMBgGA1UEChMRQ09NT0RPIENBIExpbWl0ZWQxNjA0BgNV
-BAMTLUNPTU9ETyBSU0EgRG9tYWluIFZhbGlkYXRpb24gU2VjdXJlIFNlcnZlciBD
-QTAeFw0xNzAzMjgwMDAwMDBaFw0xODAzMjgyMzU5NTlaMFcxITAfBgNVBAsTGERv
-bWFpbiBDb250cm9sIFZhbGlkYXRlZDEdMBsGA1UECxMUUG9zaXRpdmVTU0wgV2ls
-ZGNhcmQxEzARBgNVBAMMCioub25hcC5vcmcwggEiMA0GCSqGSIb3DQEBAQUAA4IB
-DwAwggEKAoIBAQDIVo+kmG2sGaeIJy5pqP6mzlIwqYUXcFOG2fodsCPg9CEdlsBO
-IECuoPYmCqrJ/MHLfs+F+SjEoBfpJlqyrpLhVj8O/9xCp4Tda/YJ18n59uDJ7Rpq
-omqZlFCj/B4+H6+dkWCFy1FxYBBAIO52iscd4F6YHD1p3xUjJRd9Yf6qnktmSooI
-hbIKzPIpSTsYiN3ArWbrGeucoQUdKX+intRHFLkKay88R7yqoqguPFIEtkXwDoJj
-aV+rC103eZ1RLwtBcS/4UcDXRDfkyQANAYvKGeHiyGuRQqEUyGEmKz2i11m1oyEP
-uD1AK+zPd33wBdOe8iZMr0CxcOGhgcKOWJ7vAgMBAAGjggHRMIIBzTAfBgNVHSME
-GDAWgBSQr2o6lFoL2JDqElZz30O0Oija5zAdBgNVHQ4EFgQUMVkz3DD9qwhzY5WT
-/P1mCVpsauQwDgYDVR0PAQH/BAQDAgWgMAwGA1UdEwEB/wQCMAAwHQYDVR0lBBYw
-FAYIKwYBBQUHAwEGCCsGAQUFBwMCME8GA1UdIARIMEYwOgYLKwYBBAGyMQECAgcw
-KzApBggrBgEFBQcCARYdaHR0cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9DUFMwCAYG
-Z4EMAQIBMFQGA1UdHwRNMEswSaBHoEWGQ2h0dHA6Ly9jcmwuY29tb2RvY2EuY29t
-L0NPTU9ET1JTQURvbWFpblZhbGlkYXRpb25TZWN1cmVTZXJ2ZXJDQS5jcmwwgYUG
-CCsGAQUFBwEBBHkwdzBPBggrBgEFBQcwAoZDaHR0cDovL2NydC5jb21vZG9jYS5j
-b20vQ09NT0RPUlNBRG9tYWluVmFsaWRhdGlvblNlY3VyZVNlcnZlckNBLmNydDAk
-BggrBgEFBQcwAYYYaHR0cDovL29jc3AuY29tb2RvY2EuY29tMB8GA1UdEQQYMBaC
-Cioub25hcC5vcmeCCG9uYXAub3JnMA0GCSqGSIb3DQEBCwUAA4IBAQAd5mu22sts
-at/bdRlIOz3dbqGwIFOo8XajlAs6ApMpyx/xetcgIKipzvGp9Wc1X8lDZl4boCH6
-KQ1//4tpksYj8RsZSZeac8vQLKggWO107sBa33yFg6Y1Dk2DdgOKZ+lNbvB1iMwK
-hSGtV3HYx1jLyQRoeYby4R7+kTI1lHAiOgT+vn5C9Z3TxqfgWuBf24CFp/95gki6
-vRysJh9Jf7A8JrrMGykC94Tpo6OiUehtQ+f65xtetvwsfNHVp3hsLzR5KwIMDARI
-IgXKyROodILsOXfR9qdA9klcXUSi6qvKF8wAopNuot4Ltyz8chiFKISjxqVrKnY2
-M7En/HyX0s1I
------END CERTIFICATE-----
-EOF_CONFIG
-
-
-## Adding configuration file: vm-cdap-cluster-cdap.properties
-cat > /tmp/vm-cdap-cluster-cdap.properties << EOF_CONFIG
-cluster.endpoint= foobar
-cluster.user= foobar
-cluster.password= foobar
-EOF_CONFIG
-
-
-## Adding configuration file: vm-cdap-cluster-console.properties
-cat > /tmp/vm-cdap-cluster-console.properties << EOF_CONFIG
-localhost.endpoint=http://localhost:1999
-localhost.user=console
-localhost.password=NTJhYWU1NzAwMzc3OTk1
-EOF_CONFIG
-
-
-## Adding configuration file: vm-cdap-cluster-gui.properties
-cat > /tmp/vm-cdap-cluster-gui.properties << EOF_CONFIG
-EOF_CONFIG
-
-
-## Adding configuration file: vm-cdap-cluster-log4j.properties
-cat > /tmp/vm-cdap-cluster-log4j.properties << EOF_CONFIG
-#log4j.debug=0
-log4j.rootLogger=warn, file
-log4j.logger.org.openecomp.ncomp=info, file
-log4j.additivity.org.openecomp.ncomp=false
-
-#log4j.logger.org.apache.http.headers=debug, file
-#log4j.logger.org.apache.http.wire=debug, file
-## uploaded logger
-log4j.logger.org.openecomp.ncomp.sirius.manager.uploaded=info, uploaded
-log4j.additivity.org.openecomp.ncomp.sirius.manager.uploaded=false
-## request logging
-log4j.logger.org.openecomp.ncomp.sirius.manager.ManagementServer.requests=info, requests
-log4j.additivity.org.openecomp.ncomp.sirius.manager.ManagementServer.requests=false
-## openstack polling
-log4j.logger.org.openecomp.ncomp.openstack.OpenStackUtil.polling=info, polling
-log4j.additivity.org.openecomp.ncomp.openstack.OpenStackUtil.polling=false
-log4j.appender.file=org.apache.log4j.RollingFileAppender
-log4j.appender.file.File=logs/manager.log
-log4j.appender.file.layout=org.apache.log4j.PatternLayout
-log4j.appender.file.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.file.MaxFileSize=50MB
-log4j.appender.file.MaxBackupIndex=5
-
-log4j.appender.uploaded=org.apache.log4j.RollingFileAppender
-log4j.appender.uploaded.File=logs/manager-uploaded.log
-log4j.appender.uploaded.layout=org.apache.log4j.PatternLayout
-log4j.appender.uploaded.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.uploaded.MaxFileSize=50MB
-log4j.appender.uploaded.MaxBackupIndex=5
-
-log4j.appender.requests=org.apache.log4j.RollingFileAppender
-log4j.appender.requests.File=logs/manager-requests.log
-log4j.appender.requests.layout=org.apache.log4j.PatternLayout
-log4j.appender.requests.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.requests.MaxFileSize=50MB
-log4j.appender.requests.MaxBackupIndex=5
-log4j.appender.polling=org.apache.log4j.RollingFileAppender
-log4j.appender.polling.File=logs/manager-polling.log
-log4j.appender.polling.layout=org.apache.log4j.PatternLayout
-log4j.appender.polling.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.polling.MaxFileSize=50MB
-log4j.appender.polling.MaxBackupIndex=5
-
-### ECOMP Logging
-log4j.logger.org.openecomp.audit=info, audit
-log4j.additivity.org.openecomp.audit=false
-log4j.logger.org.openecomp.metrics=info, metrics
-log4j.additivity.org.openecomp.metrics=false
-log4j.logger.org.openecomp.error=info, error
-log4j.additivity.org.openecomp.error=false
-log4j.logger.com.att.eelf.debug=info, debug
-log4j.additivity.org.openecomp.debug=false
-log4j.appender.audit=org.apache.log4j.RollingFileAppender
-log4j.appender.audit.File=logs/audit.log
-log4j.appender.audit.layout=org.apache.log4j.PatternLayout
-log4j.appender.audit.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%5p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.audit.MaxFileSize=50MB
-log4j.appender.audit.MaxBackupIndex=5
-log4j.appender.metrics=org.apache.log4j.RollingFileAppender
-log4j.appender.metrics.File=logs/metrics.log
-log4j.appender.metrics.layout=org.apache.log4j.PatternLayout
-log4j.appender.metrics.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.metrics.MaxFileSize=50MB
-log4j.appender.metrics.MaxBackupIndex=5
-log4j.appender.error=org.apache.log4j.RollingFileAppender
-log4j.appender.error.File=logs/error.log
-log4j.appender.error.layout=org.apache.log4j.PatternLayout
-log4j.appender.error.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.error.MaxFileSize=50MB
-log4j.appender.error.MaxBackupIndex=5
-log4j.appender.debug=org.apache.log4j.RollingFileAppender
-log4j.appender.debug.File=logs/debug.log
-log4j.appender.debug.layout=org.apache.log4j.PatternLayout
-log4j.appender.debug.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.debug.MaxFileSize=50MB
-log4j.appender.debug.MaxBackupIndex=5
-EOF_CONFIG
-
-
-## Adding configuration file: vm-cdap-cluster-manager.properties
-cat > /tmp/vm-cdap-cluster-manager.properties << EOF_CONFIG
-server.dir = data/resources
-metrics.dir = data/metrics
-properties.dir = data/properties
-server.port = 1999
-server.user.console = NTJhYWU1NzAwMzc3OTk1
-server.user.gui = MDlhZWVjZWEwMmFiOTJi
-server.user.client = YmE2OGE1N2U5NzRmMDg1
-EOF_CONFIG
-
-
-## Adding configuration file: vm-cdap-cluster-runtime.properties
-cat > /tmp/vm-cdap-cluster-runtime.properties << EOF_CONFIG
-factory.vm=org.openecomp.dcae.controller.service.servers.vm.DcaeVmFactory
-
-## Adding configuration file: monitoring-agent-gui.properties
-cat > /tmp/monitoring-agent-gui.properties << EOF_CONFIG
-EOF_CONFIG
-
-
-cat > /tmp/certificate.pkcs12.b64code << EOF_CERT
-EOF_CERT
-
-
-##############################################################
-################## Config Provisioning #######################
-##############################################################
-
-mkdir -p ~/.ssh
-touch ~/.ssh/authorized_keys
-echo ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDBn8Ctt5hJGkTQaffuSeINeABV4viBIM4TcP14kaLiWR1LkyNY+TaUnjxODobtZa4YW1lxFtoMCfZt2A5W9ZZPM+shZr4BOj+wU+xIrzn7ezN/CQjH7c4Wh0mWteuPnJrtdpyGQ/qBI2T+xo5G/Tl++SPUvvN2D4H8vl0miEgVPR47/P7Ba6kl7Bmrf9m0VDPdS69Qr2AhgBq5Qi/fTeGZA4sfKDHHRJxkQIXYmS8R5FISRpBD7ta2NTHapRz9dC6Cw8UttEFiWFUBjN6lwF9LUOkj9MiqiTQaElKKQzMIHr0AhlgIkwBLKAJoDrGQD9GKPwKCdW3OmnODMPxJjXc3 > ~/.ssh/authorized_keys
-
-cp /tmp/ecomp-nexus.crt /usr/local/share/ca-certificates/ ; update-ca-certificates
-
-wget https://nexus.onap.org/content/repositories/staging/org/openecomp/dcae/controller/dcae-controller-core-utils/1.1.0/dcae-controller-core-utils-1.1.0-runtime.zip -P /opt/app/dcae-controller-core-utils
-
-cd /opt/app/dcae-controller-core-utils
-unzip -o dcae-controller-core-utils*.zip
-
-chown -R dcae:dcae /opt/app/dcae-controller-core-utils
-
-/opt/app/dcae-controller-core-utils/bin/fs-init.py
-
-wget https://nexus.onap.org/content/repositories/staging/org/openecomp/dcae/controller/dcae-controller-service-cdap-cluster-manager/1.1.0/dcae-controller-service-cdap-cluster-manager-1.1.0-runtime.zip -P /opt/app/dcae-controller-service-cdap-cluster-manager
-
-cd /opt/app/dcae-controller-service-cdap-cluster-manager
-unzip -o dcae-controller-service-cdap-cluster-manager*.zip
-
-chown -R dcae:dcae /opt/app/dcae-controller-service-cdap-cluster-manager
-
-wget https://nexus.onap.org/content/repositories/staging/org/openecomp/dcae/controller/dcae-controller-service-dmaap-drsub/1.1.0/dcae-controller-service-dmaap-drsub-1.1.0.pom -P /opt/app/dcae-controller-service-dmaap-drsub
-
-chown -R dcae:dcae /opt/app/dcae-controller-service-dmaap-drsub
-
-curl -s -k -f -o /tmp/dcae-apod-cdap-small-hadoop_1.1.0.deb https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.apod.cdap/deb-releases/dcae-apod-cdap-small-hadoop_1.1.0.deb
-
-curl -s -k -f -o /tmp/dcae-apod-analytics-tca_1.1.0.deb https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.apod.analytics/deb-releases/dcae-apod-analytics-tca_1.1.0.deb
-
-curl -s -k -f -o /tmp/HelloWorld-3.5.1.jar http://repo1.maven.org/maven2/co/cask/cdap/HelloWorld/3.5.1/HelloWorld-3.5.1.jar
-mkdir -p /opt/app/cask-hello-world/lib
-mv /tmp/HelloWorld-3.5.1.jar /opt/app/cask-hello-world/lib
-
-find /opt -type f -exec sed -i 's/sudo//g' {} \;
-
-apt-key adv --keyserver-options --keyserver keyserver.ubuntu.com --recv 07513CAD
-wget -qO - http://repository.cask.co/ubuntu/precise/amd64/cdap/3.5/pubkey.gpg | apt-key add -
-
-wget https://nexus.onap.org/content/repositories/staging/org/openecomp/dcae/controller/dcae-controller-service-dmaap-drsub-manager/1.1.0/dcae-controller-service-dmaap-drsub-manager-1.1.0-runtime.zip -P /opt/app/dcae-controller-service-dmaap-drsub-manager
-
-cd /opt/app/dcae-controller-service-dmaap-drsub-manager
-unzip -o dcae-controller-service-dmaap-drsub-manager-1.1.0-runtime.zip
-
-chown -R dcae:dcae /opt/app/dcae-controller-service-dmaap-drsub-manager
-
-mkdir /home/dcae/.ssh
-chmod og-rwx /home/dcae/.ssh
-chown -R dcae:dcae /home/dcae/.ssh
-touch /home/dcae/.ssh/authorized_keys
-chmod og-rwx /home/dcae/.ssh/authorized_keys
-chown -R dcae:dcae /home/dcae/.ssh/authorized_keys
-echo ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDBn8Ctt5hJGkTQaffuSeINeABV4viBIM4TcP14kaLiWR1LkyNY+TaUnjxODobtZa4YW1lxFtoMCfZt2A5W9ZZPM+shZr4BOj+wU+xIrzn7ezN/CQjH7c4Wh0mWteuPnJrtdpyGQ/qBI2T+xo5G/Tl++SPUvvN2D4H8vl0miEgVPR47/P7Ba6kl7Bmrf9m0VDPdS69Qr2AhgBq5Qi/fTeGZA4sfKDHHRJxkQIXYmS8R5FISRpBD7ta2NTHapRz9dC6Cw8UttEFiWFUBjN6lwF9LUOkj9MiqiTQaElKKQzMIHr0AhlgIkwBLKAJoDrGQD9GKPwKCdW3OmnODMPxJjXc3 >> /home/dcae/.ssh/authorized_keys
-
-#bash /opt/app/dcae-cdap-small-hadoop/install.sh
+++ /dev/null
-#!/bin/bash
-
-dpkg --install /tmp/dcae-apod-cdap-small-hadoop_1.1.0.deb
-dpkg --install /tmp/dcae-apod-analytics-tca_1.1.0.deb
-
-bash /opt/app/dcae-cdap-small-hadoop/install.sh
-su dcae -c "/opt/app/dcae-controller-service-cdap-cluster-manager/bin/manager.sh config"
-su dcae -c "/opt/app/dcae-controller-service-cdap-cluster-manager/bin/manager.sh restart"
\ No newline at end of file
+++ /dev/null
-FROM ubuntu:16.04
-
-# Setup apt.conf proxy settings
-#RUN echo 'Acquire::http::proxy "http://some.proxy:8084/";' >> /etc/apt/apt.conf
-
-# Setup Corporate proxy
-#ENV no_proxy "localhost,127.0.0.1,localaddress,.localdomain.com,192.168.141.0/24"
-#ENV https_proxy http://some.proxy:8084/
-#ENV http_proxy http://fsome.proxy:8084/
-#ENV HTTP_PROXY http://some.proxy:8084/
-#ENV HTTPS_PROXY http://some.proxy:8084/
-#ENV FTP_PROXY http://some.proxy:8084/
-#ENV NO_PROXY "localhost,127.0.0.1,localaddress,.localdomain.com,192.168.141.0/24"
-
-# Additional packages
-RUN apt-get update -y
-RUN apt-get install -y git wget unzip curl dnsutils sudo
-RUN apt-get install -y maven unzip
-
-# Install python and pip
-RUN apt-get install -y python
-RUN wget https://bootstrap.pypa.io/get-pip.py
-RUN python get-pip.py
-RUN rm get-pip.py
-RUN pip install pyyaml
-
-# Install Groovy
-RUN mkdir -p /opt/app
-RUN (cd /opt/app ; curl -Lo apache-groovy-binary-2.4.6.zip https://dl.bintray.com/groovy/maven/apache-groovy-binary-2.4.6.zip )
-RUN (cd /opt/app ; unzip apache-groovy-binary-2.4.6.zip )
-RUN mkdir -p /opt/app/java/jdk
-RUN ln -s /usr /opt/app/java/jdk/jdk170
-RUN mkdir -p /opt/app/groovy
-RUN ln -s /opt/app/groovy-2.4.6 /opt/app/groovy/246
-ENV JAVA_HOME /opt/app/java/jdk/jdk170
-
-# Create user dcae
-RUN if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-# Hadoop
-EXPOSE 8020 8025 50070 50075 50010 50020
-
-# Zookeeper
-EXPOSE 3888 2888 2181
-
-VOLUME /opt/tools
-VOLUME /opt/data
-
-# Provisioning
-COPY 00-provisioning.sh /usr/local/bin/00-provisioning.sh
-RUN chmod a+x /usr/local/bin/00-provisioning.sh
-RUN /usr/local/bin/00-provisioning.sh
-
-# define the entrypoint
-COPY 01-entrypoint.sh /usr/local/bin/01-entrypoint.sh
-RUN chmod a+x /usr/local/bin/01-entrypoint.sh
-ENTRYPOINT ["/usr/local/bin/01-entrypoint.sh"]
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-version: '2'
-services:
- cdap00:
- build: .
- hostname: zldcprivatecloudtruecdap00
- image: cdap
- ports:
- - 8020
- - 50070
- - 50075
- - 50010
- - 50020
- - 3888
- - 2888
- - 2181
- - 8025
- cdap01:
- build: .
- hostname: zldcprivatecloudtruecdap01
- image: cdap
- ports:
- - 8020
- - 50070
- - 50075
- - 50010
- - 50020
- - 3888
- - 2888
- - 2181
- - 8025
- cdap02:
- build: .
- hostname: zldcprivatecloudtruecdap02
- image: cdap
- ports:
- - 8020
- - 50070
- - 50075
- - 50010
- - 50020
- - 3888
- - 2888
- - 2181
- - 8025
\ No newline at end of file
+++ /dev/null
-FROM ubuntu:16.04
-
-RUN mkdir -p /cdap
-VOLUME /cdap
\ No newline at end of file
+++ /dev/null
-FROM ubuntu:16.04
-
-# Install additional packages
-RUN apt-get update && apt-get -y install maven openjdk-8-jdk unzip python-pip curl dnsutils vim gawk wget openssh-client-ssh1
-RUN pip install pyyaml
-
-RUN apt-get update && apt-get install -y postgresql libpq5 repmgr python-psycopg2 python3-psycopg2 libgetopt-java
-RUN rm -f /usr/sbin/policy-rc.d
-
-# Install Groovy
-RUN mkdir -p /opt/app
-RUN (cd /opt/app ; curl -Lo apache-groovy-binary-2.4.6.zip https://dl.bintray.com/groovy/maven/apache-groovy-binary-2.4.6.zip )
-RUN (cd /opt/app ; unzip apache-groovy-binary-2.4.6.zip )
-RUN mkdir -p /opt/app/java/jdk
-RUN ln -s /usr /opt/app/java/jdk/jdk170
-RUN mkdir -p /opt/app/groovy
-RUN ln -s /opt/app/groovy-2.4.6 /opt/app/groovy/246
-
-# Create user dcae
-RUN if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-# Download required packages
-RUN curl -s -k -f -o /tmp/org.openecomp.dcae.storage.pgaas-cdf_1.0.0.deb https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-cdf_1.0.0.deb
-RUN curl -s -k -f -o /tmp/org.openecomp.dcae.storage.pgaas-postgresql-prep_1.0.0.deb https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-postgresql-prep_1.0.0.deb
-RUN curl -s -k -f -o /tmp/org.openecomp.dcae.storage.pgaas-postgresql-config_1.0.0.deb https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-postgresql-config_1.0.0.deb
-RUN curl -s -k -f -o /tmp/org.openecomp.dcae.storage.pgaas-pgaas_1.0.0.deb https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-pgaas_1.0.0.deb
-RUN curl -s -k -f -o /tmp/org.openecomp.dcae.storage.pgaas-pgaas-post_1.0.0.deb https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-pgaas-post_1.0.0.deb
-
-RUN apt-get update && apt-get install -y sudo && rm -rf /var/lib/apt/lists/*
-
-RUN mkdir -p /opt/tools
-RUN mkdir -p /dbroot/pgdata
-RUN mkdir -p /dbroot/pglogs
-
-EXPOSE 5432
-
-VOLUME /opt/tools
-VOLUME /dbroot/pgdata
-VOLUME /dbroot/pglogs
-
-# Setup the entrypoint
-COPY setup.sh /usr/local/bin/entrypoint.sh
-RUN chmod a+x /usr/local/bin/entrypoint.sh
-
-ENTRYPOINT ["usr/local/bin/entrypoint.sh"]
+++ /dev/null
-#!/bin/bash
-cat > /tmp/dcae_install.sh << EOF_DCAE_INSTALL
-#!/bin/bash
-set -x
-cd /tmp
-
-export DEBIAN_FRONTEND=noninteractive
-
-#### Using special configuration resource: instances/vm-postgresql/iad4.yaml
-## Adding configuration file: main
-cat | cat > /tmp/postgres.conf << EOF_CONFIG
-master: zldciad4vipstg00
-secondmaster: notused
-DRTR_NODE_KSTOREFILE: /opt/app/dcae-certificate/keystore.jks
-DRTR_NODE_KSTOREPASS: "No Certificate"
-DRTR_NODE_PVTKEYPASS: "No Certificate"
-PG_NODES : zldciad4vipstg00
-PG_JAVA_HOME : /opt/app/java/jdk/jdk170
-PG_CLUSTER : site
-EOF_CONFIG
-
-## Adding configuration file: mount_config
-cat | cat > /tmp/dcae-mount.conf << EOF_CONFIG
-osType: ubuntu
-volumes:
- opt:
- uuid: ephemeral
- size: 80
- filesystems:
- /opt/tools:
- size: 80
- type: ext4
- mount_opts: ''
- dbroot:
- uuid: cinder
- size: 75
- filesystems:
- /dbroot/pgdata:
- size: 50
- type: ext4
- mount_opts: ''
- /dbroot/pglogs:
- size: 25
- type: ext4
- mount_opts: ''
-
-EOF_CONFIG
-
-## Adding configuration file: ecomp-nexus
-cat > /tmp/ecomp-nexus.crt << EOF_CONFIG
------BEGIN CERTIFICATE-----
-MIIDtzCCAp+gAwIBAgIEet16RjANBgkqhkiG9w0BAQsFADB2MQswCQYDVQQGEwJVUzEUMBIGA1UE
-CBMLVW5zcGVjaWZpZWQxFDASBgNVBAcTC1Vuc3BlY2lmaWVkMREwDwYDVQQKEwhTb25hdHlwZTEQ
-MA4GA1UECxMHRXhhbXBsZTEWMBQGA1UEAwwNKi5lY29tcC1uZXh1czAeFw0xNjExMTQxMDE5NDJa
-Fw0zMDA3MjQxMDE5NDJaMHYxCzAJBgNVBAYTAlVTMRQwEgYDVQQIEwtVbnNwZWNpZmllZDEUMBIG
-A1UEBxMLVW5zcGVjaWZpZWQxETAPBgNVBAoTCFNvbmF0eXBlMRAwDgYDVQQLEwdFeGFtcGxlMRYw
-FAYDVQQDDA0qLmVjb21wLW5leHVzMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAqkDu
-vC91cZxOaRMYGHSyDeuw4hyXjqyD5Etl5L5TNN7+uFKEtvXsRYOxtD62TqWHKozffLE5o6zoRZL4
-8qNTQyAx0LaEfWfR2w0jat+UqtqEtW0xpOD0/O0qRq5Y/XG3Yr8SQ/y84Pr1FIflM7pM4PZTt3kc
-UfqzbaONW5K8t+UG+5jgNXdRk3hln8WMunVZeci0J6TV+tWs9tOeAKBdpI7K7LV+FJBaF8vBAw2x
-8AhlNPXKQUhK+M3DD73c1aLWrZ3mIwJXt2oQUDwgtXGCPR1/Z9f2tTAoDxpzvkwtP/BtH3qvgtpY
-QfDNmWbJVHh6ll39Hapt7V0v4aCRSN21ZQIDAQABo00wSzAMBgNVHRMEBTADAQH/MBwGA1UdEQQV
-MBOCC2Vjb21wLW5leHVzhwQK0MVLMB0GA1UdDgQWBBQxcUlk/lkKkwSz0GuewbXptJxl+zANBgkq
-hkiG9w0BAQsFAAOCAQEAPnNbtdreMZaUSjv+1eqpriLKquwnZhnwWENn1u3sw4hTAWQc+ehhogGg
-eIqPN81Dt3jhr0bYZW+r3gGq7tgrLxdSXso8bTtqHsFLszirgWcQXDlBQGnw9wqp/KBzeDJInJep
-d6aGu3yBXV6459S/mClxZTSvsR+Vz3rRWxx01R3/ft5/myqrRMDnEncqPopTbEamBuUJL3eJDpFO
-xlVqYR3y6AXwwguMaTiHMfFBmDOVaz4K8Qy6AaHH9eoch9fxOJ/7ASvqSwkC9GYTJSnF2vE37rmH
-kPp//Vm4WSnQ2NrBGkH9rUUdYdDdgWJYnTeZ+YFd8J6z9xNiEn9QKQNNcA==
------END CERTIFICATE-----
-
-EOF_CONFIG
-## Adding configuration file: vm-postgresql-console.properties
-cat > /tmp/vm-postgresql-console.properties << EOF_CONFIG
-localhost.endpoint=http://localhost:9999
-localhost.user=console
-localhost.password=MDBmMzE0NTgyMDU1NmVj
-EOF_CONFIG
-
-## Adding configuration file: vm-postgresql-gui.properties
-cat > /tmp/vm-postgresql-gui.properties << EOF_CONFIG
-EOF_CONFIG
-
-## Adding configuration file: vm-postgresql-log4j.properties
-cat > /tmp/vm-postgresql-log4j.properties << EOF_CONFIG
-#log4j.debug=0
-log4j.rootLogger=warn, file
-log4j.logger.org.openecomp.ncomp=info, file
-log4j.additivity.org.openecomp.ncomp=false
-
-#log4j.logger.org.apache.http.headers=debug, file
-#log4j.logger.org.apache.http.wire=debug, file
-## uploaded logger
-log4j.logger.org.openecomp.ncomp.sirius.manager.uploaded=info, uploaded
-log4j.additivity.org.openecomp.ncomp.sirius.manager.uploaded=false
-## request logging
-log4j.logger.org.openecomp.ncomp.sirius.manager.ManagementServer.requests=info, requests
-log4j.additivity.org.openecomp.ncomp.sirius.manager.ManagementServer.requests=false
-## openstack polling
-log4j.logger.org.openecomp.ncomp.openstack.OpenStackUtil.polling=info, polling
-log4j.additivity.org.openecomp.ncomp.openstack.OpenStackUtil.polling=false
-log4j.appender.file=org.apache.log4j.RollingFileAppender
-log4j.appender.file.File=logs/manager.log
-log4j.appender.file.layout=org.apache.log4j.PatternLayout
-log4j.appender.file.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.file.MaxFileSize=50MB
-log4j.appender.file.MaxBackupIndex=5
-
-log4j.appender.uploaded=org.apache.log4j.RollingFileAppender
-log4j.appender.uploaded.File=logs/manager-uploaded.log
-log4j.appender.uploaded.layout=org.apache.log4j.PatternLayout
-log4j.appender.uploaded.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.uploaded.MaxFileSize=50MB
-log4j.appender.uploaded.MaxBackupIndex=5
-
-log4j.appender.requests=org.apache.log4j.RollingFileAppender
-log4j.appender.requests.File=logs/manager-requests.log
-log4j.appender.requests.layout=org.apache.log4j.PatternLayout
-log4j.appender.requests.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.requests.MaxFileSize=50MB
-log4j.appender.requests.MaxBackupIndex=5
-log4j.appender.polling=org.apache.log4j.RollingFileAppender
-log4j.appender.polling.File=logs/manager-polling.log
-log4j.appender.polling.layout=org.apache.log4j.PatternLayout
-log4j.appender.polling.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
-log4j.appender.polling.MaxFileSize=50MB
-log4j.appender.polling.MaxBackupIndex=5
-
-### ECOMP Logging
-log4j.logger.org.openecomp.audit=info, audit
-log4j.additivity.org.openecomp.audit=false
-log4j.logger.org.openecomp.metrics=info, metrics
-log4j.additivity.org.openecomp.metrics=false
-log4j.logger.org.openecomp.error=info, error
-log4j.additivity.org.openecomp.error=false
-log4j.logger.com.att.eelf.debug=info, debug
-log4j.additivity.org.openecomp.debug=false
-log4j.appender.audit=org.apache.log4j.RollingFileAppender
-log4j.appender.audit.File=logs/audit.log
-log4j.appender.audit.layout=org.apache.log4j.PatternLayout
-log4j.appender.audit.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%5p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.audit.MaxFileSize=50MB
-log4j.appender.audit.MaxBackupIndex=5
-log4j.appender.metrics=org.apache.log4j.RollingFileAppender
-log4j.appender.metrics.File=logs/metrics.log
-log4j.appender.metrics.layout=org.apache.log4j.PatternLayout
-log4j.appender.metrics.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.metrics.MaxFileSize=50MB
-log4j.appender.metrics.MaxBackupIndex=5
-log4j.appender.error=org.apache.log4j.RollingFileAppender
-log4j.appender.error.File=logs/error.log
-log4j.appender.error.layout=org.apache.log4j.PatternLayout
-log4j.appender.error.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.error.MaxFileSize=50MB
-log4j.appender.error.MaxBackupIndex=5
-log4j.appender.debug=org.apache.log4j.RollingFileAppender
-log4j.appender.debug.File=logs/debug.log
-log4j.appender.debug.layout=org.apache.log4j.PatternLayout
-log4j.appender.debug.layout.ConversionPattern=%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%t|%X{ServiceName}|%X{InstanceUUID}|%p|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|%m%n
-log4j.appender.debug.MaxFileSize=50MB
-log4j.appender.debug.MaxBackupIndex=5
-EOF_CONFIG
-
-## Adding configuration file: vm-postgresql-manager.properties
-cat > /tmp/vm-postgresql-manager.properties << EOF_CONFIG
-server.dir = data/resources
-metrics.dir = data/metrics
-properties.dir = data/properties
-server.port = 9999
-server.user.console = MDBmMzE0NTgyMDU1NmVj
-server.user.gui = M2NiOTg1YzNiYTI2NTJh
-server.user.client = OTNmMmFkYzkxMzYzNTk0
-EOF_CONFIG
-
-## Adding configuration file: vm-postgresql-runtime.properties
-cat > /tmp/vm-postgresql-runtime.properties << EOF_CONFIG
-factory.vm=org.openecomp.dcae.controller.service.servers.vm.DcaeVmFactory
-factory.postgres=org.openecomp.dcae.controller.service.storage.postgres.service.impl.ServicePackageImpl
-EOF_CONFIG
-
-## Adding configuration file: vm-postgresql-hosts
-cat > /tmp/vm-postgresql-hosts << EOF_CONFIG
-EOF_CONFIG
-
-## Adding configuration file: monitoring-agent-gui.properties
-cat > /tmp/monitoring-agent-gui.properties << EOF_CONFIG
-EOF_CONFIG
-
-cat >> /etc/hosts << HOSTS_EOF
-HOSTS_EOF
-
-cat > /tmp/certificate.pkcs12.b64code << EOF_CERT
-EOF_CERT
-
-##############################################################
-##################### CLOUDINIT ##############################
-##############################################################
-
-## need to fix cloudinit in Centos.
-
-CLOUDHOSTCFG=/etc/cloud/cloud.cfg.d/99_hostname.cfg
-if [ -f /etc/redhat-release ]; then
- # CentOS/RHEL
- ( echo "hostname: \$(hostname)"; echo "fqdn: \$(hostname -f)" ) > \$CLOUDHOSTCFG
-fi
-
-mkdir -p ~/.ssh
-touch ~/.ssh/authorized_keys
-
-echo ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCYz++VKcW3Sw0Sh7fFyTIjXED6NUUNYbje7awcnvaHHAC0rUxs7boX6hmWDViXoGZA5xw4Xhk5kIEs+zxMCDlF1q/9rbyq5ndonlBz3aPx7+SBqVR5sPalbSr8dJhGPwpj/0Df+FzqjGVL2p2d4VV7SeT/kKrNcSY6SmYHln6osoGFAHsOZC0d+fiba4zfCI9EI6zHdyCujwayjQ5W5UgA50XQ0KXpI5WtF6MOwO6jPL3SNNDlWobG/nsCAMxTQ04dALpYSoamM12Ps72MfxEwaKkoAcsH6WsFbuvoUSXwNcosmyxYrxNynsUz4C2Tz+PZqelGvm8Y8MtNuhN7oqAD root@ecomp-jumpbox >> /home/ubuntu/.ssh/authorized_keys
-
-######### step-1
-
-cp /tmp/ecomp-nexus.crt /usr/local/share/ca-certificates/ ; update-ca-certificates
-
-######### step-2
-
-echo 162.242.254.138 ecomp-nexus >> /etc/hosts
-
-######### step-3
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-case runtime in
- %*)
- A1=org.openecomp.dcae.controller:dcae-controller-core-utils:1.0.0:zip
- ;;
- *)
- A1=org.openecomp.dcae.controller:dcae-controller-core-utils:1.0.0:zip:runtime
- ;;
-esac
-
-wget https://nexus.onap.org/content/repositories/staging/org/openecomp/dcae/controller/dcae-controller-core-utils/1.0.0/dcae-controller-core-utils-1.0.0-runtime.zip -P /opt/app/dcae-controller-core-utils
-
-case zip in
- jar)
- mkdir /opt/app/dcae-controller-core-utils/lib
- mv /opt/app/dcae-controller-core-utils/*.jar /opt/app/dcae-controller-core-utils/lib
- ;;
- zip)
- ( cd /opt/app/dcae-controller-core-utils ; unzip -o dcae-controller-core-utils*.zip )
- ;;
-esac
-
-chown -R dcae:dcae /opt/app/dcae-controller-core-utils
-
-######### step-4
-
-/opt/app/dcae-controller-core-utils/bin/fs-init.py
-
-######### step-5
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-case runtime in
- %*)
- A1=org.openecomp.dcae.controller:dcae-controller-service-common-vm-manager:1.0.0:zip
- ;;
- *)
- A1=org.openecomp.dcae.controller:dcae-controller-service-common-vm-manager:1.0.0:zip:runtime
- ;;
-esac
-
-wget https://nexus.onap.org/content/repositories/staging/org/openecomp/dcae/controller/dcae-controller-service-common-vm-manager/1.0.0/dcae-controller-service-common-vm-manager-1.0.0-runtime.zip -P /opt/app/dcae-controller-service-common-vm-manager
-
-case zip in
- jar)
- mkdir /opt/app/dcae-controller-service-common-vm-manager/lib
- mv /opt/app/dcae-controller-service-common-vm-manager/*.jar /opt/app/dcae-controller-service-common-vm-manager/lib
- ;;
- zip)
- ( cd /opt/app/dcae-controller-service-common-vm-manager ; unzip -o dcae-controller-service-common-vm-manager*.zip )
- ;;
-esac
-
-chown -R dcae:dcae /opt/app/dcae-controller-service-common-vm-manager
-
-######### step-6
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-case %{assemblyId} in
- %*)
- A1=org.openecomp.dcae.controller:dcae-controller-service-storage-postgres-model:1.0.0:jar
- ;;
- *)
- A1=org.openecomp.dcae.controller:dcae-controller-service-storage-postgres-model:1.0.0:jar:%{assemblyId}
- ;;
-esac
-
-wget https://nexus.onap.org/content/repositories/staging/org/openecomp/dcae/controller/dcae-controller-service-storage-postgres-model/1.0.0/dcae-controller-service-storage-postgres-model-1.0.0.jar -P /opt/app/dcae-controller-service-storage-postgres-model
-
-case jar in
- jar)
- mkdir /opt/app/dcae-controller-service-storage-postgres-model/lib
- mv /opt/app/dcae-controller-service-storage-postgres-model/*.jar /opt/app/dcae-controller-service-storage-postgres-model/lib
- ;;
- zip)
- ( cd /opt/app/dcae-controller-service-storage-postgres-model ; unzip -o dcae-controller-service-storage-postgres-model*.zip )
- ;;
-esac
-
-chown -R dcae:dcae /opt/app/dcae-controller-service-storage-postgres-model
-
-######### step-7
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-OUT=/tmp/`basename https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-cdf_1.0.0.deb`
-
-case deb in
- deb)
- dpkg --install \$OUT
- ;;
- jar)
- mkdir -p /opt/app/%{artifactId}/lib
- mv \$OUT /opt/app/%{artifactId}/lib
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
- zip)
- mkdir -p /opt/app/%{artifactId}/lib
- ( cd /opt/app/%{artifactId} ; cp -p \$OUT . ; unzip -o \$OUT )
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
-esac
-
-######### step-8
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-OUT=/tmp/`basename https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-postgresql-prep_1.0.0.deb`
-
-case deb in
- deb)
- dpkg --install \$OUT
- ;;
- jar)
- mkdir -p /opt/app/%{artifactId}/lib
- mv \$OUT /opt/app/%{artifactId}/lib
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
- zip)
- mkdir -p /opt/app/%{artifactId}/lib
- ( cd /opt/app/%{artifactId} ; cp -p \$OUT . ; unzip -o \$OUT )
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
-esac
-
-######### step-9
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-OUT=/tmp/`basename https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-postgresql-config_1.0.0.deb`
-
-case deb in
- deb)
- dpkg --install \$OUT
- ;;
- jar)
- mkdir -p /opt/app/%{artifactId}/lib
- mv \$OUT /opt/app/%{artifactId}/lib
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
- zip)
- mkdir -p /opt/app/%{artifactId}/lib
- ( cd /opt/app/%{artifactId} ; cp -p \$OUT . ; unzip -o \$OUT )
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
-esac
-
-######### step-10
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-OUT=/tmp/`basename https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-pgaas_1.0.0.deb`
-
-case deb in
- deb)
- dpkg --install \$OUT
- ;;
- jar)
- mkdir -p /opt/app/%{artifactId}/lib
- mv \$OUT /opt/app/%{artifactId}/lib
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
- zip)
- mkdir -p /opt/app/%{artifactId}/lib
- ( cd /opt/app/%{artifactId} ; cp -p \$OUT . ; unzip -o \$OUT )
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
-esac
-
-touch /etc/sudoers.d/dcae-postgres
-echo "dcae ALL=(postgres) NOPASSWD: ALL" > /etc/sudoers.d/dcae-postgres
-
-/opt/app/postgresql-prep/bin/iDNS-responder.py &
-
-/etc/init.d/cron restart
-
-######### step-11
-
-if [ ! -e /home/dcae ]; then useradd -m -s /bin/bash dcae; fi
-
-OUT=/tmp/`basename https://nexus.onap.org/content/sites/raw/org.openecomp.dcae.pgaas/deb-releases/org.openecomp.dcae.storage.pgaas-pgaas-post_1.0.0.deb`
-case deb in
- deb)
- dpkg --install \$OUT
- ;;
- jar)
- mkdir -p /opt/app/%{artifactId}/lib
- mv \$OUT /opt/app/%{artifactId}/lib
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
- zip)
- mkdir -p /opt/app/%{artifactId}/lib
- ( cd /opt/app/%{artifactId} ; cp -p \$OUT . ; unzip -o \$OUT )
- chown -R dcae:dcae /opt/app/%{artifactId}
- ;;
-esac
-
-######### step-12
-
-find /opt -type f -exec sed -i 's/sudo//g' {} \;
-su dcae -c "/opt/app/dcae-controller-service-common-vm-manager/bin/manager.sh config"
-su dcae -c "/opt/app/dcae-controller-service-common-vm-manager/bin/manager.sh restart"
-
-mkdir /home/dcae/.ssh
-chmod og-rwx /home/dcae/.ssh
-chown -R dcae:dcae /home/dcae/.ssh
-touch /home/dcae/.ssh/authorized_keys
-chmod og-rwx /home/dcae/.ssh/authorized_keys
-chown -R dcae:dcae /home/dcae/.ssh/authorized_keys
-echo ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCYz++VKcW3Sw0Sh7fFyTIjXED6NUUNYbje7awcnvaHHAC0rUxs7boX6hmWDViXoGZA5xw4Xhk5kIEs+zxMCDlF1q/9rbyq5ndonlBz3aPx7+SBqVR5sPalbSr8dJhGPwpj/0Df+FzqjGVL2p2d4VV7SeT/kKrNcSY6SmYHln6osoGFAHsOZC0d+fiba4zfCI9EI6zHdyCujwayjQ5W5UgA50XQ0KXpI5WtF6MOwO6jPL3SNNDlWobG/nsCAMxTQ04dALpYSoamM12Ps72MfxEwaKkoAcsH6WsFbuvoUSXwNcosmyxYrxNynsUz4C2Tz+PZqelGvm8Y8MtNuhN7oqAD root@ecomp-jumpbox >> /home/dcae/.ssh/authorized_keys
-#no final script: vm-postgresql.userdata
-EOF_DCAE_INSTALL
-echo null > /tmp/.password
-chmod u+x /tmp/dcae_install.sh
-/tmp/dcae_install.sh 2>&1 | tee /tmp/dcae_install.log
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeZookeeper }}
-apiVersion: v1
-kind: Service
-metadata:
- name: zookeeper
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: zookeeper
-spec:
- ports:
- - name: zookeeper1
- port: 2181
- selector:
- app: zookeeper
- clusterIP: None
-#{{ end }}
-#{{ if not .Values.disableDcaeKafka }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: kafka
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: kafka
-spec:
- ports:
- - name: kafka1
- port: 9092
- selector:
- app: kafka
- clusterIP: None
-#{{ end }}
-#{{ if not .Values.disableDcaeDmaap }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: dmaap
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: dmaap
- version: 1.1.0
-spec:
- ports:
- - name: mr1
- port: 3904
- #nodePort: {{ .Values.nodePortPrefix }}27
- - name: mr2
- port: 3905
- #nodePort: {{ .Values.nodePortPrefix }}26
- selector:
- app: dmaap
- #type: NodePort
- clusterIP: None
-#{{ end }}
-#{{ if not .Values.disableDcaeDcaePgaas }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: zldciad4vipstg00
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: dcae-pgaas
-spec:
- selector:
- app: dcae-pgaas
- ports:
- - port: 5432
- protocol: TCP
- targetPort: 5432
- nodePort: {{ .Values.nodePortPrefix }}45
- type: NodePort
-#{{ end }}
-#{{ if not .Values.disableDcaeDcaeCollectorCommonEvent }}
----
-apiVersion: v1
-kind: Service
-metadata:
- labels:
- app: dcae-collector-common-event
- version: latest
- name: dcae-collector-common-event
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- ports:
- - name: dcae-ce1
- port: 8080
- protocol: TCP
- nodePort: {{ .Values.nodePortPrefix }}36
- - name: dcae-ce2
- port: 8443
- protocol: TCP
- nodePort: {{ .Values.nodePortPrefix }}37
- - name: dcae-ce3
- port: 9999
- protocol: TCP
- nodePort: {{ .Values.nodePortPrefix }}38
- selector:
- app: dcae-collector-common-event
- type: NodePort
-#{{ end }}
-#{{ if not .Values.disableDcaeDcaeCollectorDmaapbc }}
----
-apiVersion: v1
-kind: Service
-metadata:
- labels:
- app: dcae-collector-dmaapbc
- version: latest
- name: dcae-collector-dmaapbc
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- ports:
- - name: dcae-bc1
- port: 8080
- protocol: TCP
- targetPort: 8080
- nodePort: {{ .Values.nodePortPrefix }}39
- - name: dcae-bc2
- port: 8443
- protocol: TCP
- targetPort: 8443
- nodePort: {{ .Values.nodePortPrefix }}40
- selector:
- app: dcae-collector-dmaapbc
- type: NodePort
-#{{ end }}
\ No newline at end of file
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeCdap }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- annotations:
- deployment.kubernetes.io/revision: "1"
- labels:
- app: cdap0
- name: cdap0
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: cdap0
- strategy:
- rollingUpdate:
- maxSurge: 1
- maxUnavailable: 1
- type: RollingUpdate
- template:
- metadata:
- labels:
- app: cdap0
- name: cdap0
- spec:
- initContainers:
- - command: ["/bin/bash", "-c", "mkdir -p /cdap/{cdap0-opt-tools,cdap0-opt-data,pod-ip}; grep `hostname` /etc/hosts > /cdap/pod-ip/`hostname`_ip.txt; while [`ls /cdap/pod-ip | wc -l` < 3]; do sleep 1; done"]
- name: create-fs
- image: {{ .Values.image.cdapfs }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- volumeMounts:
- - mountPath: /cdap
- name: cdap-root
- hostname: zldcprivatecloudtruecdap00
- containers:
- - image: {{ .Values.image.cdap }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- command: ["/bin/bash"]
- args: ["-c", "cat /cdap/pod-ip/* >> /etc/hosts; /usr/local/bin/01-entrypoint.sh; sleep infinity;"]
- name: cdap0
- ports:
- - containerPort: 8020
- protocol: TCP
- - containerPort: 8025
- protocol: TCP
- - containerPort: 50070
- protocol: TCP
- - containerPort: 50075
- protocol: TCP
- - containerPort: 50010
- protocol: TCP
- - containerPort: 50020
- protocol: TCP
- - containerPort: 3888
- protocol: TCP
- - containerPort: 2888
- protocol: TCP
- - containerPort: 2181
- protocol: TCP
- volumeMounts:
- - mountPath: /cdap
- name: cdap-root
- - mountPath: /opt/tools
- name: dcae-cdap0-opt-tools
- - mountPath: /opt/data
- name: dcae-cdap0-opt-data
- volumes:
- - name: cdap-root
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap
- - name: dcae-cdap0-opt-tools
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap/cdap0-opt-tools
- - name: dcae-cdap0-opt-data
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap/cdap0-opt-data
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeCdap }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- annotations:
- deployment.kubernetes.io/revision: "1"
- labels:
- app: cdap1
- name: cdap1
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: cdap1
- strategy:
- rollingUpdate:
- maxSurge: 1
- maxUnavailable: 1
- type: RollingUpdate
- template:
- metadata:
- labels:
- app: cdap1
- name: cdap1
- spec:
- initContainers:
- - command: ["/bin/bash", "-c", "mkdir -p /cdap/{cdap1-opt-tools,cdap1-opt-data}; grep `hostname` /etc/hosts > /cdap/pod-ip/`hostname`_ip.txt; while [`ls /cdap/pod-ip | wc -l` < 3]; do sleep 1; done"]
- name: create-fs
- image: {{ .Values.image.cdapfs }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- volumeMounts:
- - mountPath: /cdap
- name: cdap-root
- hostname: zldcprivatecloudtruecdap01
- containers:
- - image: {{ .Values.image.cdap }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- command: ["/bin/bash"]
- args: ["-c", "cat /cdap/pod-ip/* >> /etc/hosts; /usr/local/bin/01-entrypoint.sh; sleep infinity;"]
- name: cdap1
- ports:
- - containerPort: 8020
- protocol: TCP
- - containerPort: 8025
- protocol: TCP
- - containerPort: 50070
- protocol: TCP
- - containerPort: 50075
- protocol: TCP
- - containerPort: 50010
- protocol: TCP
- - containerPort: 50020
- protocol: TCP
- - containerPort: 3888
- protocol: TCP
- - containerPort: 2888
- protocol: TCP
- - containerPort: 2181
- protocol: TCP
- volumeMounts:
- - mountPath: /cdap
- name: cdap-root
- - mountPath: /opt/tools
- name: dcae-cdap1-opt-tools
- - mountPath: /opt/data
- name: dcae-cdap1-opt-data
- volumes:
- - name: cdap-root
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap
- - name: dcae-cdap1-opt-tools
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap/cdap1-opt-tools
- - name: dcae-cdap1-opt-data
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap/cdap1-opt-data
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeCdap }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- annotations:
- deployment.kubernetes.io/revision: "1"
- labels:
- app: cdap2
- name: cdap2
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: cdap2
- strategy:
- rollingUpdate:
- maxSurge: 1
- maxUnavailable: 1
- type: RollingUpdate
- template:
- metadata:
- labels:
- app: cdap2
- name: cdap2
- spec:
- initContainers:
- - command: ["/bin/bash", "-c", "mkdir -p /cdap/{cdap2-opt-tools,cdap2-opt-data}; grep `hostname` /etc/hosts > /cdap/pod-ip/`hostname`_ip.txt; while [`ls /cdap/pod-ip | wc -l` < 3]; do sleep 1; done"]
- name: create-fs
- image: {{ .Values.image.cdapfs }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- volumeMounts:
- - mountPath: /cdap
- name: cdap-root
- hostname: zldcprivatecloudtruecdap02
- containers:
- - image: {{ .Values.image.cdap }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- command: ["/bin/bash"]
- args: ["-c", "cat /cdap/pod-ip/* >> /etc/hosts; /usr/local/bin/01-entrypoint.sh; sleep infinity;"]
- name: cdap2
- ports:
- - containerPort: 8020
- protocol: TCP
- - containerPort: 8025
- protocol: TCP
- - containerPort: 50070
- protocol: TCP
- - containerPort: 50075
- protocol: TCP
- - containerPort: 50010
- protocol: TCP
- - containerPort: 50020
- protocol: TCP
- - containerPort: 3888
- protocol: TCP
- - containerPort: 2888
- protocol: TCP
- - containerPort: 2181
- protocol: TCP
- volumeMounts:
- - mountPath: /cdap
- name: cdap-root
- - mountPath: /opt/tools
- name: dcae-cdap2-opt-tools
- - mountPath: /opt/data
- name: dcae-cdap2-opt-data
- volumes:
- - name: cdap-root
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap
- - name: dcae-cdap2-opt-tools
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap/cdap2-opt-tools
- - name: dcae-cdap2-opt-data
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/cdap/cdap2-opt-data
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeDcaeCollectorCommonEvent }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: dcae-collector-common-event
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: dcae-collector-common-event
- template:
- metadata:
- labels:
- app: dcae-collector-common-event
- name: dcae-collector-common-event
- spec:
- containers:
- - image: {{ .Values.image.commonevent }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: dcae-collector-common-event
- ports:
- - containerPort: 8080
- - containerPort: 8443
- - containerPort: 9999
- env:
-# - name: KAFKA_ZOOKEEPER_CONNECT
-# value: "zookeeper:2181"
-# command:
-# - start-kafka.sh
- volumeMounts:
- - mountPath: /opt/app/manager/config
- name: dcae-collector-common-event-config
- restartPolicy: Always
- volumes:
- - name: dcae-collector-common-event-config
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/common-event/config
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeDcaeCollectorDmaapbc }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: dcae-collector-dmaapbc
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: dcae-collector-dmaapbc
- template:
- metadata:
- labels:
- app: dcae-collector-dmaapbc
- name: dcae-collector-dmaapbc
- spec:
- containers:
- - image: {{ .Values.image.dmaapbc }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: dcae-collector-dmaapbc
- ports:
- - containerPort: 18080
- - containerPort: 18443
- env:
-# - name: KAFKA_ZOOKEEPER_CONNECT
-# value: "zookeeper:2181"
-# command:
-# - start-kafka.sh
- volumeMounts:
- - mountPath: /opt/app/config
- name: dcae-collector-dmaapbc-config
- restartPolicy: Always
- volumes:
- - name: dcae-collector-dmaapbc-config
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/dmaapbc/config
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeDcaeController }}
-apiVersion: v1
-kind: Service
-metadata:
- labels:
- app: dcae-controller
- version: latest
- name: dcae-controller
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- ports:
- - name: dcae-con1
- port: 8000
- protocol: TCP
- targetPort: 8000
- nodePort: {{ .Values.nodePortPrefix }}34
- - name: dcae-con2
- port: 9998
- protocol: TCP
- targetPort: 9998
- nodePort: {{ .Values.nodePortPrefix }}35
- selector:
- app: dcae-controller
- type: NodePort
----
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: dcae-controller
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: dcae-controller
- template:
- metadata:
- labels:
- app: dcae-controller
- name: dcae-controller
- spec:
- containers:
- - image: {{ .Values.image.controller }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: dcae-controller
- ports:
- - containerPort: 8000
- - containerPort: 9998
- env:
-# - name: KAFKA_ZOOKEEPER_CONNECT
-# value: "zookeeper:2181"
-# command:
-# - start-kafka.sh
- volumeMounts:
- - mountPath: /opt/app/config
- name: dcae-controller-config
- restartPolicy: Always
- volumes:
- - name: dcae-controller-config
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/dcae-controller/config
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeDmaap }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: dmaap
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: dmaap
- template:
- metadata:
- labels:
- app: dmaap
- name: dmaap
- spec:
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - kafka
- - --container-name
- - zookeeper
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: dmaap-readiness
- containers:
- - image: {{ .Values.image.dmaap }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: dmaap
- ports:
- - containerPort: 3904
- - containerPort: 3905
- readinessProbe:
- tcpSocket:
- port: 3904
- initialDelaySeconds: 5
- periodSeconds: 10
- volumeMounts:
- - mountPath: /appl/dmaapMR1/bundleconfig/etc/appprops/MsgRtrApi.properties
- name: appprops
- - mountPath: /appl/dmaapMR1/etc/cadi.properties
- name: cadi
- - mountPath: /appl/dmaapMR1/etc/keyfile
- name: mykey
- restartPolicy: Always
- volumes:
- - name: appprops
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/message-router/dmaap/MsgRtrApi.properties
- - name: cadi
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/message-router/dmaap/cadi.properties
- - name: mykey
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/message-router/dmaap/mykey
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeKafka }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: kafka
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: kafka
- template:
- metadata:
- labels:
- app: kafka
- name: kafka
- spec:
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - zookeeper
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: kafka-readiness
- containers:
- - image: {{ .Values.image.kafka }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: kafka
- ports:
- - containerPort: 9092
- readinessProbe:
- tcpSocket:
- port: 9092
- initialDelaySeconds: 5
- periodSeconds: 10
- env:
- - name: KAFKA_ZOOKEEPER_CONNECT
- value: "zookeeper.{{ .Values.nsPrefix }}"
- - name: KAFKA_ADVERTISED_HOST_NAME
- value: "kafka"
- - name: KAFKA_BROKER_ID
- value: "1"
- - name: KAFKA_ADVERTISED_PORT
- value: "9092"
- - name: KAFKA_PORT
- value: "9092"
- volumeMounts:
- - mountPath: /var/run/docker.sock
- name: docker-socket
- - mountPath: /kafka
- name: kafka-data
- - mountPath: /start-kafka.sh
- name: start-kafka
- restartPolicy: Always
- volumes:
- - name: docker-socket
- hostPath:
- path: /var/run/docker.sock
- - name: kafka-data
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/message-router/dcae-startup-vm-message-router/docker_files/data-kafka/
- - name: start-kafka
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/message-router/dcae-startup-vm-message-router/docker_files/start-kafka.sh
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeZookeeper }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: zookeeper
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: zookeeper
- template:
- metadata:
- labels:
- app: zookeeper
- name: zookeeper
- spec:
- containers:
- - image: {{ .Values.image.zookeeper }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: zookeeper
- ports:
- - containerPort: 2181
- volumeMounts:
- - mountPath: /opt/zookeeper-3.4.9/data
- name: zookeeper-data
- restartPolicy: Always
- volumes:
- - name: zookeeper-data
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/message-router/dcae-startup-vm-message-router/docker_files/data-zookeeper
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableDcaeDcaePgaas }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- annotations:
- deployment.kubernetes.io/revision: "1"
- labels:
- app: dcae-pgaas
- name: dcae-pgaas
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: 1
- selector:
- matchLabels:
- app: dcae-pgaas
- template:
- metadata:
- labels:
- app: dcae-pgaas
- spec:
- hostname: zldciad4vipstg00
- containers:
- - image: {{ .Values.image.pgaas }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- command: ["/bin/bash"]
- args: ["-c", "/usr/local/bin/entrypoint.sh; sleep infinity;"]
- name: dcae-pgaas
- ports:
- - containerPort: 5432
- volumeMounts:
- - mountPath: /dbroot/pgdata
- name: dcae-pgaas-pgdata
- - mountPath: /dbroot/pglogs
- name: dcae-pgaas-pglogs
- - mountPath: /opt/tools
- name: dcae-pgaas-tools
- volumes:
- - name: dcae-pgaas-pgdata
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/pgaas/pgdata
- - name: dcae-pgaas-pglogs
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/pgaas/pglogs
- - name: dcae-pgaas-tools
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/dcae/pgaas/tools
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
replicas: 1
filebeat:
image: docker.elastic.co/beats/filebeat:5.5.0
+
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
+
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
# limitations under the License.
apiVersion: v1
-description: A Helm chart for Kubernetes
+description: ONAP Logging ElasticStack
name: log
-version: 0.1.0
+version: 2.0.0
# See the License for the specific language governing permissions and
# limitations under the License.
-nsPrefix: onap
-pullPolicy: Always
-nodePortPrefix: 302
-image:
- readiness: oomk8s/readiness-check:1.1.0
- pgaas: oomk8s/pgaas:1
- cdapfs: oomk8s/cdap-fs:1.0.0
- cdap: oomk8s/cdap:1.0.7
- dmaap: attos/dmaap:latest
- kafka: wurstmeister/kafka:latest
- zookeeper: wurstmeister/zookeeper:latest
- dmaapbc: nexus3.onap.org:10001/openecomp/dcae-dmaapbc:1.1-STAGING-latest
- commonevent: nexus3.onap.org:10001/openecomp/dcae-collector-common-event:1.1-STAGING-latest
- controller: nexus3.onap.org:10001/openecomp/dcae-controller:1.1-STAGING-latest
+apiVersion: v1
+description: ONAP Logging Elasticsearch
+name: log-elasticsearch
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
#action.destructive_requires_name: true
# Set a custom port for HTTP: If required, default is 9200-9300
# This is used for REST APIs
-http.port: 9200
+http.port: {{.Values.service.externalPort}}
# Port to bind for communication between nodes. Accepts a single value or a range.
# If a range is specified, the node will bind to the first available port in the range.
# Defaults to 9300-9400.
# More info:
-transport.tcp.port: 9300
+transport.tcp.port: {{.Values.service.externalPortTcp}}
xpack.graph.enabled: false
#Set to false to disable X-Pack graph features.
--- /dev/null
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /bin/sh
+ - -c
+ - |
+ sysctl -w vm.max_map_count=262144
+ mkdir -p /logroot/elasticsearch/logs
+ mkdir -p /logroot/elasticsearch/data
+ chmod -R 777 /logroot/elasticsearch
+ chown -R root:root /logroot
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ securityContext:
+ privileged: true
+ image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: init-sysctl
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /logroot/
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - containerPort: {{ .Values.service.internalPortTcp }}
+ name: {{ .Values.service.name }}-tcp
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPortTcp }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
+ name: {{ include "common.fullname" . }}-config
+ subPath: elasticsearch.yml
+ - mountPath: /usr/share/elasticsearch/data/
+ name: {{ include "common.fullname" . }}-data
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ items:
+ - key: elasticsearch.yml
+ path: elasticsearch.yml
+ - name: {{ include "common.fullname" . }}-data
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ - name: {{ include "common.fullname" . }}-logs
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Namespace }}/{{ .Values.persistence.mountSubPathLogs }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Namespace }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
--- /dev/null
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- end -}}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.internalPortTcp }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.externalPortTcp }}
+ name: {{ .Values.service.name }}-tcp
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.externalPortTcp }}
+ targetPort: {{ .Values.service.internalPortTcp }}
+ name: {{ .Values.service.name }}-tcp
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+loggingRepository: docker.elastic.co
+image: elasticsearch/elasticsearch:5.5.0
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ accessMode: ReadWriteMany
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: log/elasticsearch/data
+ mountSubPathLogs: log
+
+service:
+ #Example service definition with external, internal and node ports.
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ name: log-es
+ externalPort: 9200
+ internalPort: 9200
+ externalPortTcp: 9300
+ internalPortTcp: 9300
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
# limitations under the License.
apiVersion: v1
-description: DCAE Gen 1
-name: DCAE
-version: 1.1.0
+description: ONAP Logging Kibana
+name: log-kibana
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
xpack.watcher.enabled: false
#Set to false to disable Watcher.
# Kibana is served by a back end server. This setting specifies the port to use.
-server.port: 5601
+server.port: {{.Values.service.externalPort}}
# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
# The default is 'localhost', which usually means remote machines will not be able to connect.
server.name: "Kibana"
# The URL of the Elasticsearch instance to use for all your queries.
-# OOM-427, OOM-441 hardcoded onap workspace to avoid helm upgrade past 2.3
-elasticsearch.url: "http://elasticsearch.{{.Values.nsPrefix}}:9200"
-#elasticsearch-service.{{.Values.nsPrefix}}:9200"
-#elasticsearch.url: "http://10.247.47.3:9200"
+elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"
# When this setting's value is true Kibana uses the hostname specified in the server.host
# setting. When the value of this setting is false, Kibana uses the hostname of the host
# that connects to this Kibana instance.
--- /dev/null
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - log-elasticsearch
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/kibana/config/kibana.yml
+ name: {{ include "common.fullname" . }}
+ subPath: kibana.yml
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: kibana.yml
+ path: kibana.yml
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+loggingRepository: docker.elastic.co
+image: kibana/kibana:5.5.0
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+ elasticsearchServiceName: log-es
+ elasticsearchPort: 9200
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ #Example service definition with external, internal and node ports.
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: NodePort
+ name: log-kibana
+ externalPort: 5601
+ internalPort: 5601
+ nodePort: 53
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Logging Logstash
+name: log-logstash
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
http.host: "0.0.0.0"
## Path where pipeline configurations reside
path.config: /usr/share/logstash/pipeline
-
+
## Type of queue : memeory based or file based
#queue.type: persisted
## Size of queue
#queue.max_bytes: 1024mb
## Setting true makes logstash check periodically for change in pipeline configurations
config.reload.automatic: true
-
+
## xpack configurations
#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"]
#xpack.monitoring.elasticsearch.username: elastic
######## Connection configurations ########
## The port to listen on.
- port => 5044
+ port => {{.Values.service.externalPort}}
## Close Idle clients after the specified time in seconds. Default is 60 seconds
#client_inactivity_timeout => 60
######### Elasticsearchcluster and host configurations #########
-#can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered
-##Also protocol can be specified like ["http://10.247.186.12:9200"]
-## OOM-427, OOM-441 hardcoded onap workspace to avoid helm upgrade past 2.3
- hosts => ["http://elasticsearch.{{.Values.nsPrefix}}:9200"]
+ ##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered
+ hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"]
## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false.
--- /dev/null
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - log-elasticsearch
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository| default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - containerPort: {{ .Values.service.internalPortHttp }}
+ name: {{ .Values.service.name }}-http
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/logstash/config/logstash.yml
+ name: {{ include "common.fullname" . }}
+ subPath: logstash.yml
+ - mountPath: /usr/share/logstash/pipeline/onap-pipeline.conf
+ name: {{ include "common.fullname" . }}
+ subPath: onap-pipeline.conf
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: logstash.yml
+ path: logstash.yml
+ - key: onap-pipeline.conf
+ path: onap-pipeline.conf
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.internalPortHttp }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.externalPortHttp }}
+ name: {{ .Values.service.name }}-http
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.externalPortHttp }}
+ targetPort: {{ .Values.service.internalPortHttp }}
+ name: {{ .Values.service.name }}-http
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# application image
+loggingRepository: docker.elastic.co
+image: logstash/logstash:5.4.3
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+ elasticsearchServiceName: log-es
+ elasticsearchPort: 9200
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ #Example service definition with external, internal and node ports.
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ name: log-ls
+ externalPort: 5044
+ internalPort: 5044
+ externalPortHttp: 9600
+ internalPortHttp: 9600
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableLogElasticsearch }}
-apiVersion: v1
-kind: Service
-metadata:
- labels:
- app: elasticsearch
- name: elasticsearch
- namespace: {{ .Values.nsPrefix }}
-spec:
- ports:
- - name: http
- port: 9200
- targetPort: 9200
- nodePort: {{ .Values.nodePortPrefix }}54
- selector:
- app: elasticsearch
- type: NodePort
----
-apiVersion: v1
-kind: Service
-metadata:
- name: elasticsearchtcp
- namespace: {{ .Values.nsPrefix }}
- labels:
- app: elasticsearch
-spec:
- ports:
- - name: tcp
- port: 9300
- targetPort: 9300
- selector:
- app: elasticsearch
-#{{ end }}
-#{{ if not .Values.disableLogLogstash }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: logstashinternal
- namespace: {{ .Values.nsPrefix }}
- labels:
- app: logstash
-spec:
- ports:
- - name: http
- port: 9600
- targetPort: 9600
- selector:
- app: logstash
----
-apiVersion: v1
-kind: Service
-metadata:
- name: logstash
- namespace: {{ .Values.nsPrefix }}
- labels:
- app: logstash
-spec:
- ports:
- - name: transport
- port: 5044
- targetPort: 5044
- nodePort: {{ .Values.nodePortPrefix }}55
- selector:
- app: logstash
- type: NodePort
-#{{ end }}
-#{{ if not .Values.disableLogKibana }}
----
-apiVersion: v1
-kind: Service
-metadata:
- labels:
- app: kibana
- name: kibana
- namespace: {{ .Values.nsPrefix }}
-spec:
- ports:
- - name: tcp-ks
- port: 5601
- targetPort: 5601
- nodePort: {{ .Values.nodePortPrefix }}53
- selector:
- app: kibana
- type: NodePort
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableLogElasticsearch }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- labels:
- app: elasticsearch
- name: log-elasticsearch
- namespace: {{ .Values.nsPrefix }}
-spec:
- replicas: {{ .Values.elasticsearchReplicas }}
- selector:
- matchLabels:
- app: elasticsearch
- template:
- metadata:
- labels:
- app: elasticsearch
- name: log-elasticsearch
- spec:
- initContainers:
- - command:
- - /bin/sh
- - -c
- - |
- sysctl -w vm.max_map_count=262144
- mkdir -p /logroot/elasticsearch/logs
- mkdir -p /logroot/elasticsearch/data
- chmod -R 777 /logroot/elasticsearch
- chown -R root:root /logroot
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- securityContext:
- privileged: true
- image: {{ .Values.image.es_bb }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: init-sysctl
- volumeMounts:
- - name: elasticsearch-logs
- mountPath: /logroot/
- containers:
- - name: elasticsearch
- image: {{ .Values.image.elasticsearch}}
- ports:
- - containerPort: 9200
- name: http
- protocol: TCP
- - containerPort: 9300
- name: transport
- protocol: TCP
- readinessProbe:
- tcpSocket:
- port: 9300
- volumeMounts:
- - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
- name: elasticsearch-conf
- subPath: elasticsearch.yml
- - mountPath: /usr/share/elasticsearch/data/
- name: elasticsearch-data
- - mountPath: /usr/share/elasticsearch/logs/
- name: elasticsearch-logs
- volumes:
- - name: elasticsearch-data
- persistentVolumeClaim:
- claimName: elasticsearch-db
- - name: elasticsearch-logs
- hostPath:
- path: {{ .Values.dataRootDir }}/{{ .Values.nsPrefix }}/log/
- - name: elasticsearch-conf
- configMap:
- name: log-elasticsearch-configmap
- items:
- - key: elasticsearch.yml
- path: elasticsearch.yml
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: log-elasticsearch-configmap
- namespace: {{ .Values.nsPrefix }}
-data:
-{{ (.Files.Glob "resources/elasticsearch/conf/elasticsearch.yml").AsConfig | indent 2 }}
-#{{ end }}
-
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableLogKibana }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- labels:
- app: kibana
- name: log-kibana
- namespace: {{ .Values.nsPrefix }}
-spec:
- replicas: {{ .Values.kibanaReplicas }}
- selector:
- matchLabels:
- app: kibana
- template:
- metadata:
- labels:
- app: kibana
- name: log-kibana
- spec:
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - elasticsearch
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: kibana-readiness
- containers:
- - name: kibana
- image: {{ .Values.image.kibana }}
- ports:
- - containerPort: 5601
- name: http
- protocol: TCP
- readinessProbe:
- tcpSocket:
- port: 5601
- volumeMounts:
- - name: kibana-conf
- mountPath: /usr/share/kibana/config/
- volumes:
- - name: kibana-conf
- configMap:
- name: log-kibana-configmap
- items:
- - key: kibana.yml
- path: kibana.yml
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: log-kibana-configmap
- namespace: {{ .Values.nsPrefix }}
-data:
-{{ tpl (.Files.Glob "resources/kibana/conf/kibana.yml").AsConfig . | indent 2 }}
-#{{ end }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-#{{ if not .Values.disableLogElasticsearch }}
-apiVersion: v1
-kind: PersistentVolume
-metadata:
- name: {{ .Values.nsPrefix }}-elasticsearch-db
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- name: {{ .Values.nsPrefix }}-elasticsearch-db
-spec:
- capacity:
- storage: 2Gi
- accessModes:
- - ReadWriteMany
- persistentVolumeReclaimPolicy: Retain
- hostPath:
- path: {{ .Values.dataRootDir }}/{{ .Values.nsPrefix }}/log/elasticsearch/data
----
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
- name: elasticsearch-db
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- accessModes:
- - ReadWriteMany
- resources:
- requests:
- storage: 2Gi
- selector:
- matchLabels:
- name: {{ .Values.nsPrefix }}-elasticsearch-db
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableLogLogstash }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- labels:
- app: logstash
- name: log-logstash
- namespace: {{ .Values.nsPrefix }}
-spec:
- replicas: {{ .Values.logstashReplicas }}
- selector:
- matchLabels:
- app: logstash
- template:
- metadata:
- labels:
- app: logstash
- name: log-logstash
- spec:
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - elasticsearch
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: logstash-readiness
- containers:
- - name: logstash
- image: {{ .Values.image.logstash }}
- ports:
- - containerPort: 5044
- name: transport
- protocol: TCP
- - containerPort: 9600
- name: http
- protocol: TCP
- readinessProbe:
- tcpSocket:
- port: 5044
- volumeMounts:
- - mountPath: /usr/share/logstash/config/
- name: logstash-conf
- - mountPath: /usr/share/logstash/pipeline/
- name: logstash-pipeline
- volumes:
- - name: logstash-conf
- configMap:
- name: log-logstash-configmap
- items:
- - key: logstash.yml
- path: logstash.yml
- - name: logstash-pipeline
- configMap:
- name: log-logstash-configmap
- items:
- - key: onap-pipeline.conf
- path: onap-pipeline.conf
-
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: log-logstash-configmap
- namespace: {{ .Values.nsPrefix }}
-data:
-{{ tpl (.Files.Glob "resources/logstash/conf/logstash.yml").AsConfig . | indent 2 }}
-{{ tpl (.Files.Glob "resources/logstash/pipeline/onap-pipeline.conf").AsConfig . | indent 2 }}
-#{{ end }}
# See the License for the specific language governing permissions and
# limitations under the License.
-nsPrefix: onap
-pullPolicy: Always
-nodePortPrefix: 302
-dataRootDir: /dockerdata-nfs
-elasticsearchReplicas: 1
-kibanaReplicas: 1
-logstashReplicas: 1
-image:
- readiness: oomk8s/readiness-check:1.1.0
- logstash: docker.elastic.co/logstash/logstash:5.4.3
- kibana: docker.elastic.co/kibana/kibana:5.5.0
- elasticsearch: docker.elastic.co/elasticsearch/elasticsearch:5.5.0
- es_bb: busybox
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
# limitations under the License.
apiVersion: v1
-description: A Helm chart for Kubernetes
+description: ONAP MicroServices Bus
name: msb
-version: 0.1.0
+version: 2.0.0
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+apiVersion: v1
+description: ONAP MicroServices Bus Kube2MSB Registrator
+name: kube2msb
+version: 2.0.0
--- /dev/null
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - msb-discovery
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ # TODO: Temporary command:
+ command:
+ - /bin/sh
+ - -c
+ - export AUTH_TOKEN=$(cat /var/run/secrets/kubernetes.io/serviceaccount/token); /bin/kube2msb --kube_master_url=${KUBE_MASTER_URL} --msb_url=${MSB_URL}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ env:
+ - name: KUBE_MASTER_URL
+ value: {{ .Values.config.kubeMasterUrl }}
+ - name: MSB_URL
+ value: {{tpl $.Values.config.discoveryUrl .}}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/oom/kube2msb:latest
+pullPolicy: Always
+
+# application configuration
+config:
+ routeLabels: "visualRange:1"
+ kubeMasterUrl: https://kubernetes.default:443
+ discoveryUrl: http://{{.Release.Name}}-msb-discovery.{{include "common.namespace" .}}:10081
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness: {}
+
+readiness: {}
+
+service: {}
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+apiVersion: v1
+description: ONAP MicroServices Bus Consul
+name: msb-consul
+version: 2.0.0
--- /dev/null
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.dockerHubRepository | default .Values.dockerHubRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+dockerHubRepository: registry.hub.docker.com
+image: library/consul:0.9.3
+pullPolicy: Always
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: NodePort
+ name: msb-consul
+ externalPort: 8500
+ internalPort: 8500
+ nodePort: 85
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+apiVersion: v1
+description: ONAP MicroServices Bus Discovery
+name: msb-discovery
+version: 2.0.0
--- /dev/null
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - msb-consul
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: CONSUL_IP
+ value: {{.Release.Name}}-msb-consul.{{ include "common.namespace" . }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/msb/msb_discovery:1.1.0-SNAPSHOT-latest
+pullPolicy: Always
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: NodePort
+ name: msb-discovery
+ externalPort: 10081
+ internalPort: 10081
+ nodePort: 81
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+apiVersion: v1
+description: ONAP MicroServices Bus Internal API Gateway
+name: msb-eag
+version: 2.0.0
--- /dev/null
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - msb-discovery
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - containerPort: {{ .Values.service.internalPortHttps }}
+ name: {{ .Values.service.name }}-https
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: CONSUL_IP
+ value: {{.Release.Name}}-msb-consul.{{ include "common.namespace" . }}
+ - name: SDCLIENT_IP
+ value: {{.Release.Name}}-msb-discovery.{{ include "common.namespace" . }}
+ - name: ROUTE_LABELS
+ value: {{ .Values.config.routeLabels }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.externalPortHttps }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePortHttps }}
+ name: {{ .Values.service.name }}-https
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.externalPortHttps }}
+ targetPort: {{ .Values.service.internalPortHttps }}
+ name: {{ .Values.service.name }}-https
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/msb/msb_apigateway:1.1.0-SNAPSHOT-latest
+pullPolicy: Always
+
+# application configuration
+config:
+ routeLabels: "visualRange:0"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: NodePort
+ name: msb-eag
+ externalPort: 80
+ internalPort: 80
+ nodePort: 82
+ externalPortHttps: 443
+ internalPortHttps: 443
+ nodePortHttps: 84
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+apiVersion: v1
+description: ONAP MicroServices Bus Internal API Gateway
+name: msb-iag
+version: 2.0.0
--- /dev/null
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - msb-discovery
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - containerPort: {{ .Values.service.internalPortHttps }}
+ name: {{ .Values.service.name }}-https
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: CONSUL_IP
+ value: {{.Release.Name}}-msb-consul.{{ include "common.namespace" . }}
+ - name: SDCLIENT_IP
+ value: {{.Release.Name}}-msb-discovery.{{ include "common.namespace" . }}
+ - name: ROUTE_LABELS
+ value: {{ .Values.config.routeLabels }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.externalPortHttps }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePortHttps }}
+ name: {{ .Values.service.name }}-https
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - port: {{ .Values.service.externalPortHttps }}
+ targetPort: {{ .Values.service.internalPortHttps }}
+ name: {{ .Values.service.name }}-https
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/msb/msb_apigateway:1.1.0-SNAPSHOT-latest
+pullPolicy: Always
+
+# application configuration
+config:
+ routeLabels: "visualRange:1"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: NodePort
+ name: msb-iag
+ externalPort: 80
+ internalPort: 80
+ nodePort: 80
+ externalPortHttps: 443
+ internalPortHttps: 443
+ nodePortHttps: 83
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableMsbMsbConsul }}
-apiVersion: v1
-kind: Service
-metadata:
- name: msb-consul
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: msb-consul
-spec:
- ports:
- - port: {{ .Values.consulPort }}
- nodePort: {{ .Values.consulNodePort }}
- selector:
- app: msb-consul
- type: NodePort
-#{{ end }}
-#{{ if not .Values.disableMsbMsbDiscovery }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: msb-discovery
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: msb-discovery
-spec:
- clusterIP: "{{ .Values.discoveryClusterIP }}"
- ports:
- - port: {{ .Values.discoveryPort }}
- nodePort: {{ .Values.discoveryNodePort }}
- selector:
- app: msb-discovery
- type: NodePort
-#{{ end }}
-#{{ if not .Values.disableMsbMsbIag }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: msb-iag
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: msb-iag
-spec:
- ports:
- - name: http
- port: {{ .Values.iagPort }}
- nodePort: {{ .Values.iagNodePort }}
- - name: https
- port: {{ .Values.iagPort_https }}
- nodePort: {{ .Values.iagNodePort_https }}
- selector:
- app: msb-iag
- type: NodePort
-#{{ end }}
-#{{ if not .Values.disableMsbMsbEag }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: msb-eag
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: msb-eag
-spec:
- ports:
- - name: http
- port: {{ .Values.eagPort }}
- nodePort: {{ .Values.eagNodePort }}
- - name: https
- port: {{ .Values.eagPort_https }}
- nodePort: {{ .Values.eagNodePort_https }}
- selector:
- app: msb-eag
- type: NodePort
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableKube2MsbKube2MsbRegistrator }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: kube2msb-registrator
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: 1
- selector:
- matchLabels:
- app: kube2msb-registrator
- template:
- metadata:
- labels:
- app: kube2msb-registrator
- name: kube2msb-registrator
- spec:
- hostname: kube2msb-registrator
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - msb-discovery
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: kube2msb-registrator-readiness
- containers:
- - args:
- image: {{ .Values.image.kube2msb }}
- name: kube2msb-registrator
- env:
- - name: KUBE_MASTER_URL
- value: {{ .Values.kubeMasterUrl }}
- - name: MSB_URL
- value: {{tpl $.Values.discoveryUrl .}}
- imagePullPolicy: {{ .Values.pullPolicy }}
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableMsbMsbConsul }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: msb-consul
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.msbConsulReplicas }}
- selector:
- matchLabels:
- app: msb-consul
- template:
- metadata:
- labels:
- app: msb-consul
- name: msb-consul
- spec:
- hostname: msb-consul
- containers:
- - args:
- image: {{ .Values.image.consul }}
- name: msb-consul
- ports:
- - containerPort: {{ .Values.consulPort }}
- name: msb-consul
- readinessProbe:
- tcpSocket:
- port: {{ .Values.consulPort }}
- initialDelaySeconds: 5
- periodSeconds: 10
- imagePullPolicy: {{ .Values.pullPolicy }}
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableMsbMsbDiscovery }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: msb-discovery
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.discoveryReplicas }}
- selector:
- matchLabels:
- app: msb-discovery
- template:
- metadata:
- labels:
- app: msb-discovery
- name: msb-discovery
- spec:
- hostname: msb-discovery
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - msb-consul
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: msb-discovery-readiness
- containers:
- - args:
- image: {{ .Values.image.discovery }}
- name: "msb-discovery"
- env:
- - name: CONSUL_IP
- value: msb-consul.{{ .Values.nsPrefix }}
- ports:
- - containerPort: {{ .Values.discoveryPort }}
- name: msb-discovery
- readinessProbe:
- tcpSocket:
- port: {{ .Values.discoveryPort }}
- initialDelaySeconds: 5
- periodSeconds: 10
- imagePullPolicy: {{ .Values.pullPolicy }}
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableMsbMsbEag }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: msb-eag
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.eagReplicas }}
- selector:
- matchLabels:
- app: msb-eag
- template:
- metadata:
- labels:
- app: msb-eag
- name: msb-eag
- spec:
- hostname: msb-eag
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - msb-discovery
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: msb-eag-readiness
- containers:
- - args:
- image: {{ .Values.image.apigateway }}
- name: "msb-eag"
- env:
- - name: CONSUL_IP
- value: msb-consul.{{ .Values.nsPrefix }}
- - name: SDCLIENT_IP
- value: msb-discovery.{{ .Values.nsPrefix }}
- - name: ROUTE_LABELS
- value: "visualRange:0"
- ports:
- - containerPort: {{ .Values.eagPort }}
- name: msb-eag
- readinessProbe:
- tcpSocket:
- port: {{ .Values.eagPort }}
- initialDelaySeconds: 5
- periodSeconds: 10
- imagePullPolicy: {{ .Values.pullPolicy}}
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableMsbMsbIag }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: msb-iag
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.iagReplicas }}
- selector:
- matchLabels:
- app: msb-iag
- template:
- metadata:
- labels:
- app: msb-iag
- name: msb-iag
- spec:
- hostname: msb-iag
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - msb-discovery
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: msb-iag-readiness
- containers:
- - args:
- image: {{ .Values.image.apigateway }}
- name: "msb-iag"
- env:
- - name: CONSUL_IP
- value: msb-consul.{{ .Values.nsPrefix }}
- - name: SDCLIENT_IP
- value: msb-discovery.{{ .Values.nsPrefix }}
- - name: ROUTE_LABELS
- value: "visualRange:1"
- ports:
- - containerPort: {{ .Values.iagPort }}
- name: msb-iag
- readinessProbe:
- tcpSocket:
- port: {{ .Values.iagPort }}
- initialDelaySeconds: 5
- periodSeconds: 10
- imagePullPolicy: "{{ .Values.pullPolicy}}"
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
# See the License for the specific language governing permissions and
# limitations under the License.
-nsPrefix: onap
-pullPolicy: IfNotPresent
-image:
- readiness: oomk8s/readiness-check:1.1.0
- consul: consul:0.9.3
- discovery: nexus3.onap.org:10001/onap/msb/msb_discovery:1.1.0-SNAPSHOT-latest
- apigateway: nexus3.onap.org:10001/onap/msb/msb_apigateway:1.1.0-SNAPSHOT-latest
- kube2msb: nexus3.onap.org:10001/onap/oom/kube2msb
-
-consulPort: 8500
-consulNodePort: 30500
-msbConsulReplicas: 1
-
-discoveryPort: 10081
-discoveryNodePort: 30081
-discoveryReplicas: 1
-
-iagPort: 80
-iagPort_https: 443
-iagNodePort: 30080
-iagNodePort_https: 30443
-iagReplicas: 2
-
-eagPort: 80
-eagPort_https: 443
-eagNodePort: 30082
-eagNodePort_https: 30446
-eagReplicas: 2
-
-kubeMasterUrl: https://kubernetes.default.svc.cluster.local:443
-discoveryUrl: http://msb-discovery.{{ .Values.nsPrefix }}:10081
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
mso: nexus3.onap.org:10001/openecomp/mso:v1.1.2
mariadb: nexus3.onap.org:10001/mariadb:10.1.11
filebeat: docker.elastic.co/beats/filebeat:5.5.0
+
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
# domain name of msb gateway
msbgateway: msb-iag.{{ .Values.nsPrefix }}
msbPort: 80
+
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
repository: '@local'
condition: esr.enabled
- name: log
- version: ~0.1.0
+ version: ~2.0.0
repository: '@local'
condition: log.enabled
- name: message-router
repository: '@local'
condition: mock.enabled
- name: msb
- version: ~0.1.0
+ version: ~2.0.0
repository: '@local'
condition: msb.enabled
- name: multicloud
enabled: true
esr:
enabled: true
-log:
+log: # ONAP Logging ElasticStack
enabled: true
message-router:
enabled: true
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
policyNexusVersion: v1.1.1
ubuntu: ubuntu:16.04
filebeat: docker.elastic.co/beats/filebeat:5.5.0
+
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
ubuntuInit: oomk8s/ubuntu-init:1.0.0
onapPortal:
webappsDir: "/opt/apache-tomcat-8.0.37/webapps"
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
-# File generated from /opt/config
+#file generated from /opt/config
#
GLOBAL_INJECTED_AAI1_IP_ADDR = "{{.Release.Name}}-aai.{{include "common.namespace" .}}"
GLOBAL_INJECTED_AAI2_IP_ADDR = "N/A"
GLOBAL_INJECTED_VM_FLAVOR = "{{ .Values.openStackFlavourMedium }}"
GLOBAL_INJECTED_VM_IMAGE_NAME = "{{ .Values.ubuntuImage }}"
GLOBAL_INJECTED_PUBLIC_NET_ID = "{{ .Values.openStackPublicNetId }}"
+GLOBAL_INJECTED_SCRIPT_VERSION = "{{ .Values.scriptVersion }}"
GLOBAL_INJECTED_PROPERTIES = {
"GLOBAL_INJECTED_AAI1_IP_ADDR" : "{{.Release.Name}}-aai.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_APPC_IP_ADDR" : "{{.Release.Name}}-appc-sdnhost.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_VID_IP_ADDR" : "{{.Release.Name}}-vid-server.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_VM_FLAVOR" : "{{ .Values.openStackFlavourMedium }}",
"GLOBAL_INJECTED_VM_IMAGE_NAME" : "{{ .Values.ubuntuImage }}",
- "GLOBAL_INJECTED_PUBLIC_NET_ID" : "{{ .Values.openStackPublicNetId }}"
+ "GLOBAL_INJECTED_PUBLIC_NET_ID" : "{{ .Values.openStackPublicNetId }}",
+ "GLOBAL_INJECTED_SCRIPT_VERSION" : "{{ .Values.scriptVersion }}"
}
openStackTenantId: "47899782ed714295b1151681fdfd51f5"
openStackUserName: "vnf_user"
ubuntuImage: "Ubuntu_14.04.5_LTS"
+scriptVersion: "1.1.1"
# default number of instances
robotReplicas: 1
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
sdcBackend: nexus3.onap.org:10001/openecomp/sdc-backend:v1.1.0
filebeat: docker.elastic.co/beats/filebeat:5.5.0
ubuntuInit: oomk8s/ubuntu-init:1.0.0
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
disableSdncSdncDgbuilder: false
disableSdncSdncPortal: false
disableNfsProvisioner: false
-
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{ .Release.Name }}-log:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
openStackKeyStoneUrl: "http://1.2.3.4:5000"
openStackServiceTenantName: "service"
openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
-
+ logstashServiceName: log-ls
+ logstashPort: 5044
# default number of instances
replicaCount: 1
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
mariadb: nexus3.onap.org:10001/library/mariadb:10
vid: nexus3.onap.org:10001/openecomp/vid:v1.1.1
filebeat: docker.elastic.co/beats/filebeat:5.5.0
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
Code Review / oom.git / commitdiff