Many words were advertised by the spell checker.
Some of them are obviously mispelled and are fixed here.
Issue-ID: DOC-710
Signed-off-by: guillaume.lambert <guillaume.lambert@orange.com>
Change-Id: I4108ba7e5d89099d16ae5714609a9701137ae83c
> ./install-metallb-on-cluster.sh
> ./install-metallb-on-cluster.sh
-Configuration Ngninx ingress controller
-=======================================
+Configuration Nginx ingress controller
+======================================
After installation DNS server and ingress controller we can install and
configure ingress controller.
After installation DNS server and ingress controller we can install and
configure ingress controller.
NFS Master, and configure all Worker nodes a Kubernetes cluster to play
the role of NFS slaves.
NFS Master, and configure all Worker nodes a Kubernetes cluster to play
the role of NFS slaves.
-It is recommneded that a separate VM, outside of the kubernetes
+It is recommended that a separate VM, outside of the kubernetes
cluster, be used. This is to ensure that the NFS Master does not compete for
resources with Kubernetes Control Plane or Worker Nodes.
cluster, be used. This is to ensure that the NFS Master does not compete for
resources with Kubernetes Control Plane or Worker Nodes.
of k8s PaaS for ONAP operations and can be installed to provide
additional functionality for ONAP engineers.
of k8s PaaS for ONAP operations and can be installed to provide
additional functionality for ONAP engineers.
-The versions of PaaS compoents that are supported by OOM are as follows:
+The versions of PaaS components that are supported by OOM are as follows:
.. table:: ONAP PaaS components
.. table:: ONAP PaaS components
Here the Name column shows the RELEASE NAME, In our case we want to try the
scale operation on cassandra, thus the RELEASE NAME would be dev-cassandra.
Here the Name column shows the RELEASE NAME, In our case we want to try the
scale operation on cassandra, thus the RELEASE NAME would be dev-cassandra.
-Now we need to obtain the chart name for casssandra. Use the below
+Now we need to obtain the chart name for cassandra. Use the below
command to get the chart name::
> helm search cassandra
command to get the chart name::
> helm search cassandra
local/sdc-cs 8.0.0 ONAP Service Design and Creation Cassandra
Here the Name column shows the chart name. As we want to try the scale
local/sdc-cs 8.0.0 ONAP Service Design and Creation Cassandra
Here the Name column shows the chart name. As we want to try the scale
-operation for cassandra, thus the correponding chart name is local/cassandra
+operation for cassandra, thus the corresponding chart name is local/cassandra
Now we have both the command's arguments, thus we can perform the
Now we have both the command's arguments, thus we can perform the
-scale opeartion for cassandra as follows::
+scale operation for cassandra as follows::
> helm upgrade dev-cassandra local/cassandra --set replicaCount=3
> helm upgrade dev-cassandra local/cassandra --set replicaCount=3
-Using this command we can scale up or scale down the cassadra db instances.
+Using this command we can scale up or scale down the cassandra db instances.
The ONAP components use Kubernetes provided facilities to build clustered,
The ONAP components use Kubernetes provided facilities to build clustered,
* [`OOM-514 <https://jira.onap.org/browse/OOM-514>`_] - Readiness prob fails sometimes even though the relevant pods are running
* [`OOM-539 <https://jira.onap.org/browse/OOM-539>`_] - Kube2MSB registrator doesn't support https REST service registration
* [`OOM-570 <https://jira.onap.org/browse/OOM-570>`_] - Wrong value is assigned to kube2msb AUTH_TOKEN environment variable
* [`OOM-514 <https://jira.onap.org/browse/OOM-514>`_] - Readiness prob fails sometimes even though the relevant pods are running
* [`OOM-539 <https://jira.onap.org/browse/OOM-539>`_] - Kube2MSB registrator doesn't support https REST service registration
* [`OOM-570 <https://jira.onap.org/browse/OOM-570>`_] - Wrong value is assigned to kube2msb AUTH_TOKEN environment variable
-* [`OOM-574 <https://jira.onap.org/browse/OOM-574>`_] - OOM configuration for robot doesnt copy heat templatese in dockerdata-nfs
+* [`OOM-574 <https://jira.onap.org/browse/OOM-574>`_] - OOM configuration for robot does not copy heat templatese in dockerdata-nfs
* [`OOM-577 <https://jira.onap.org/browse/OOM-577>`_] - Incorrect evaluation of bash command in yaml template file (portal-vnc-dep.yaml)
* [`OOM-578 <https://jira.onap.org/browse/OOM-578>`_] - Hard coded token in oom/kubernetes/kube2msb/values.yaml file
* [`OOM-589 <https://jira.onap.org/browse/OOM-589>`_] - Can not acces CLI in vnc-portal
* [`OOM-577 <https://jira.onap.org/browse/OOM-577>`_] - Incorrect evaluation of bash command in yaml template file (portal-vnc-dep.yaml)
* [`OOM-578 <https://jira.onap.org/browse/OOM-578>`_] - Hard coded token in oom/kubernetes/kube2msb/values.yaml file
* [`OOM-589 <https://jira.onap.org/browse/OOM-589>`_] - Can not acces CLI in vnc-portal
* [`OOM-913 <https://jira.onap.org/browse/OOM-913>`_] - Consul agent pod is failing
* [`OOM-916 <https://jira.onap.org/browse/OOM-916>`_] - Used to fix testing issues related to usability
* [`OOM-918 <https://jira.onap.org/browse/OOM-918>`_] - Policy - incorrect configmap mount causes base.conf to disappear
* [`OOM-913 <https://jira.onap.org/browse/OOM-913>`_] - Consul agent pod is failing
* [`OOM-916 <https://jira.onap.org/browse/OOM-916>`_] - Used to fix testing issues related to usability
* [`OOM-918 <https://jira.onap.org/browse/OOM-918>`_] - Policy - incorrect configmap mount causes base.conf to disappear
-* [`OOM-920 <https://jira.onap.org/browse/OOM-920>`_] - Issue with CLAMP configuation
+* [`OOM-920 <https://jira.onap.org/browse/OOM-920>`_] - Issue with CLAMP configuration
* [`OOM-921 <https://jira.onap.org/browse/OOM-921>`_] - align onap/values.yaml and onap/resources/environments/dev.yaml - different /dockerdata-nfs
* [`OOM-926 <https://jira.onap.org/browse/OOM-926>`_] - Disable clustering for APP-C out-of-the-box
* [`OOM-927 <https://jira.onap.org/browse/OOM-927>`_] - Need a production grade configuration override file of ONAP deployment
* [`OOM-921 <https://jira.onap.org/browse/OOM-921>`_] - align onap/values.yaml and onap/resources/environments/dev.yaml - different /dockerdata-nfs
* [`OOM-926 <https://jira.onap.org/browse/OOM-926>`_] - Disable clustering for APP-C out-of-the-box
* [`OOM-927 <https://jira.onap.org/browse/OOM-927>`_] - Need a production grade configuration override file of ONAP deployment
* [`OOM-948 <https://jira.onap.org/browse/OOM-948>`_] - make vfc got an error
* [`OOM-951 <https://jira.onap.org/browse/OOM-951>`_] - Update APPC charts based on on changes for ccsdk and Nitrogen ODL
* [`OOM-953 <https://jira.onap.org/browse/OOM-953>`_] - switch aai haproxy/hbase repo from hub.docker.com to nexus3
* [`OOM-948 <https://jira.onap.org/browse/OOM-948>`_] - make vfc got an error
* [`OOM-951 <https://jira.onap.org/browse/OOM-951>`_] - Update APPC charts based on on changes for ccsdk and Nitrogen ODL
* [`OOM-953 <https://jira.onap.org/browse/OOM-953>`_] - switch aai haproxy/hbase repo from hub.docker.com to nexus3
-* [`OOM-958 <https://jira.onap.org/browse/OOM-958>`_] - SDC-be deployment missing environment paramter
+* [`OOM-958 <https://jira.onap.org/browse/OOM-958>`_] - SDC-be deployment missing environment parameter
* [`OOM-964 <https://jira.onap.org/browse/OOM-964>`_] - SDC Healthcheck failure on sdc-be and sdc-kb containers down
* [`OOM-968 <https://jira.onap.org/browse/OOM-968>`_] - warning on default deployment values.yaml
* [`OOM-969 <https://jira.onap.org/browse/OOM-969>`_] - oomk8s images have no Dockerfile's
* [`OOM-964 <https://jira.onap.org/browse/OOM-964>`_] - SDC Healthcheck failure on sdc-be and sdc-kb containers down
* [`OOM-968 <https://jira.onap.org/browse/OOM-968>`_] - warning on default deployment values.yaml
* [`OOM-969 <https://jira.onap.org/browse/OOM-969>`_] - oomk8s images have no Dockerfile's
* [`OOM-993 <https://jira.onap.org/browse/OOM-993>`_] - AAI model-loader.properties not in sync with project file
* [`OOM-994 <https://jira.onap.org/browse/OOM-994>`_] - DCAE cloudify controller docker image 1.1.0 N/A - use 1.2.0/1.3.0
* [`OOM-1003 <https://jira.onap.org/browse/OOM-1003>`_] - dcae-cloudify-manager chart references obsolete image version
* [`OOM-993 <https://jira.onap.org/browse/OOM-993>`_] - AAI model-loader.properties not in sync with project file
* [`OOM-994 <https://jira.onap.org/browse/OOM-994>`_] - DCAE cloudify controller docker image 1.1.0 N/A - use 1.2.0/1.3.0
* [`OOM-1003 <https://jira.onap.org/browse/OOM-1003>`_] - dcae-cloudify-manager chart references obsolete image version
-* [`OOM-1004 <https://jira.onap.org/browse/OOM-1004>`_] - aai-resources constantly fails due to cassanda hostname
+* [`OOM-1004 <https://jira.onap.org/browse/OOM-1004>`_] - aai-resources constantly fails due to cassandra hostname
* [`OOM-1005 <https://jira.onap.org/browse/OOM-1005>`_] - AAI Widgets not loading due to duplicate volumes
* [`OOM-1007 <https://jira.onap.org/browse/OOM-1007>`_] - Update dcae robot health check config
* [`OOM-1008 <https://jira.onap.org/browse/OOM-1008>`_] - Set default consul server replica count to 1
* [`OOM-1005 <https://jira.onap.org/browse/OOM-1005>`_] - AAI Widgets not loading due to duplicate volumes
* [`OOM-1007 <https://jira.onap.org/browse/OOM-1007>`_] - Update dcae robot health check config
* [`OOM-1008 <https://jira.onap.org/browse/OOM-1008>`_] - Set default consul server replica count to 1
* [`OOM-1068 <https://jira.onap.org/browse/OOM-1068>`_] - Update SO with new AAI cert
* [`OOM-1076 <https://jira.onap.org/browse/OOM-1076>`_] - some charts still using readiness check image from amsterdam 1.x
* [`OOM-1077 <https://jira.onap.org/browse/OOM-1077>`_] - AAI resources and traversal deployment failure on non-rancher envs
* [`OOM-1068 <https://jira.onap.org/browse/OOM-1068>`_] - Update SO with new AAI cert
* [`OOM-1076 <https://jira.onap.org/browse/OOM-1076>`_] - some charts still using readiness check image from amsterdam 1.x
* [`OOM-1077 <https://jira.onap.org/browse/OOM-1077>`_] - AAI resources and traversal deployment failure on non-rancher envs
-* [`OOM-1079 <https://jira.onap.org/browse/OOM-1079>`_] - Robot charts dont allow over ride of pub_key, dcae_collector_ip and dcae_collector_port
+* [`OOM-1079 <https://jira.onap.org/browse/OOM-1079>`_] - Robot charts do not allow over ride of pub_key, dcae_collector_ip and dcae_collector_port
* [`OOM-1081 <https://jira.onap.org/browse/OOM-1081>`_] - Remove component 'mock' from TOSCA deployment
* [`OOM-1082 <https://jira.onap.org/browse/OOM-1082>`_] - Wrong pv location of dcae postgres
* [`OOM-1085 <https://jira.onap.org/browse/OOM-1085>`_] - appc hostname is incorrect in url
* [`OOM-1081 <https://jira.onap.org/browse/OOM-1081>`_] - Remove component 'mock' from TOSCA deployment
* [`OOM-1082 <https://jira.onap.org/browse/OOM-1082>`_] - Wrong pv location of dcae postgres
* [`OOM-1085 <https://jira.onap.org/browse/OOM-1085>`_] - appc hostname is incorrect in url
class provisioner
* CPU and Memory limits in Helm Charts to improve Pod placement based on
class provisioner
* CPU and Memory limits in Helm Charts to improve Pod placement based on
- resource availablity in Kubernetes Cluster
+ resource availability in Kubernetes Cluster
* Support of Node Selectors for Pod placement
* Support of Node Selectors for Pod placement
-* Documenation of a Highly-Available Kubernetes Cluster Deployment
+* Documentation of a Highly-Available Kubernetes Cluster Deployment
* Availability of a Default Storage Class Provisioner for improved Persistent
Storage resiliency
* Availability of a CNI reference integration for Multi-site support
* Availability of a Default Storage Class Provisioner for improved Persistent
Storage resiliency
* Availability of a CNI reference integration for Multi-site support
-The focus of this release was on maintanence and as such no new features were
+The focus of this release was on maintenance and as such no new features were
delivered.
A list of issues resolved in this release can be found here: https://jira.onap.org/projects/OOM/versions/10726
delivered.
A list of issues resolved in this release can be found here: https://jira.onap.org/projects/OOM/versions/10726
-----------
- `<https://github.com/bitnami/bitnami-docker-mariadb-galera/issues/35>`_
-----------
- `<https://github.com/bitnami/bitnami-docker-mariadb-galera/issues/35>`_
- Workaround is to generate a password with "short" strenght or pregenerate
+ Workaround is to generate a password with "short" strength or pregenerate
passwords without single quote in it. Default deployment is using "short"
password generation for mariadb.
passwords without single quote in it. Default deployment is using "short"
password generation for mariadb.