chart-version: { get_input: chart-version }
namespace: { get_input: namespace }
stable-repo-url: { get_input: stable-repo-url}
- config: '{ "aaf": {"enabled": false}, "aai": {"enabled": false}, "appc": {"enabled": false}, "clamp": {"enabled": false}, "cli": {"enabled": false}, "consul": {"enabled": false}, "dcaegen2": {"enabled": false}, "dmaap": {"enabled": false}, "esr": {"enabled": false}, "log": {"enabled": false}, "sniro-emulator": {"enabled": false}, "msb": {"enabled": false}, "multicloud": {"enabled": false}, "nbi": {"enabled": false}, "oof": {"enabled": false}, "policy": {"enabled": false}, "pomba": {"enabled": false}, "portal": {"enabled": false}, "robot": {"enabled": false}, "sdc": {"enabled": false}, "sdnc": {"enabled": false}, "so": {"enabled": false}, "uui": {"enabled": false}, "vfc": {"enabled": false}, "vid": {"enabled": false}, "vnfsdk": {"enabled": false} }'
+ config: '{ "aaf": {"enabled": false}, "aai": {"enabled": false}, "appc": {"enabled": false}, "clamp": {"enabled": false}, "cli": {"enabled": false}, "consul": {"enabled": false}, "dcaegen2": {"enabled": false}, "dmaap": {"enabled": false}, "log": {"enabled": false}, "sniro-emulator": {"enabled": false}, "msb": {"enabled": false}, "multicloud": {"enabled": false}, "nbi": {"enabled": false}, "oof": {"enabled": false}, "policy": {"enabled": false}, "pomba": {"enabled": false}, "portal": {"enabled": false}, "robot": {"enabled": false}, "sdc": {"enabled": false}, "sdnc": {"enabled": false}, "so": {"enabled": false}, "uui": {"enabled": false}, "vfc": {"enabled": false}, "vid": {"enabled": false}, "vnfsdk": {"enabled": false} }'
aaf:
type: onap.nodes.component
- type: cloudify.relationships.connected_to
target: onap_env
- esr:
- type: onap.nodes.component
- properties:
- tiller-server-ip: { get_input: tiller-server-ip }
- tiller-server-port: { get_input: tiller-server-port }
- component-name: esr
- chart-repo-url: { get_input: chart-repo-url }
- chart-version: { get_input: chart-version }
- namespace: { get_input: namespace }
- stable-repo-url: { get_input: stable-repo-url}
- relationships:
- - type: cloudify.relationships.connected_to
- target: onap_env
-
log:
type: onap.nodes.component
properties:
stable-repo-url: { get_input: stable-repo-url}
relationships:
- type: cloudify.relationships.connected_to
- target: onap_env
\ No newline at end of file
+ target: onap_env
enabled: false
dcaegen2:
enabled: false
-esr:
- enabled: false
log:
enabled: false
message-router:
local/dcaegen2 8.0.0 ONAP DCAE Gen2
local/dgbuilder 8.0.0 D.G. Builder application
local/dmaap 8.0.0 ONAP DMaaP components
-local/esr 8.0.0 ONAP External System Register
local/log 8.0.0 ONAP Logging ElasticStack
local/mariadb-galera 8.0.0 Chart for MariaDB Galera cluster
local/mongo 8.0.0 MongoDB Server
# Dont use onap truststore when aaf is disabled
continue
fi
- if [ ${f: -3} = ".sh" ]; then
+ if echo $f | grep '\.sh$' >/dev/null; then
continue
fi
- if [ ${f: -4} = ".b64" ]
+ if echo $f | grep '\.b64$' >/dev/null; then
then
base64 -d $f > $WORK_DIR/`basename $f .b64`
else
done
for f in $MORE_CERTS_DIR/*; do
- if [ ${f: -4} == ".pem" ]
- then
+ if echo $f | grep '\.pem$' >/dev/null; then
cp $f $WORK_DIR/.
fi
done
# Import Custom Certificates
for f in $WORK_DIR/*; do
- if [ ${f: -4} = ".pem" ]; then
+ if echo $f | grep '\.pem$' >/dev/null; then
echo "importing certificate: $f"
keytool -import -file $f -alias `basename $f` -keystore $WORK_DIR/$TRUSTSTORE_OUTPUT_FILENAME -storepass $TRUSTSTORE_PASSWORD -noprompt
if [ $? != 0 ]; then
--- /dev/null
+{{/*
+# Copyright © 2021 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{/*
+ Resolve the name of a chart's serviceMonitor.
+
+ The default will be the chart name (or $dot.Values.nameOverride if set).
+ And the use of .Values.metrics.serviceMonitor.name overrides all.
+
+ - .Values.metrics.serviceMonitor.name: override default serviceMonitor (ie. chart) name
+ Example values file addition:
+ metrics:
+ serviceMonitor:
+ enabled: true
+ port: blueprints-processor-http
+ ## specify target port if name is not given to the port in the service definition
+ ##
+ # targetPort: 8080
+ path: /metrics
+ basicAuth:
+ enabled: false
+ externalSecretName: mysecretname
+ externalSecretUserKey: login
+ externalSecretPasswordKey: password
+
+ ## Namespace in which Prometheus is running
+ ##
+ # namespace: monitoring
+
+ ## Interval at which metrics should be scraped.
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
+ ##
+ # interval: 60s
+
+ ## Timeout after which the scrape is ended
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
+ ##
+ # scrapeTimeout: 10s
+
+ ## ServiceMonitor selector labels
+ ## ref: https://github.com/bitnami/charts/tree/master/bitnami/prometheus-operator#prometheus-configuration
+ ##
+ selector:
+ app: '{{ include "common.name" . }}'
+ chart: '{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}'
+ release: '{{ include "common.release" . }}'
+ heritage: '{{ .Release.Service }}'
+
+ ## RelabelConfigs to apply to samples before scraping
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#relabelconfig
+ ## Value is evalued as a template
+ ##
+ relabelings: []
+
+ ## MetricRelabelConfigs to apply to samples before ingestion
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#relabelconfig
+ ## Value is evalued as a template
+ ##
+ metricRelabelings: []
+ # - sourceLabels:
+ # - "__name__"
+ # targetLabel: "__name__"
+ # action: replace
+ # regex: '(.*)'
+ # replacement: 'example_prefix_$1'
+
+*/}}
+{{/*
+ Expand the serviceMonitor name for a chart.
+*/}}
+{{- define "common.serviceMonitorName" -}}
+ {{- $name := default .Chart.Name .Values.nameOverride -}}
+ {{- default $name .Values.metrics.serviceMonitor.name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/* Define the metadata of serviceMonitor
+ The function takes from one to four arguments (inside a dictionary):
+ - .dot : environment (.)
+ - .suffix : a string which will be added at the end of the name (with a '-').
+ - .annotations: the annotations to add
+ - .labels : labels to add
+ Usage example:
+ {{ include "common.serviceMonitorMetadata" ( dict "suffix" "myService" "dot" .) }}
+ {{ include "common.serviceMonitorMetadata" ( dict "annotations" .Values.metrics.serviceMonitor.annotation "dot" .) }}
+*/}}
+
+{{- define "common.serviceMonitorMetadata" -}}
+{{- $dot := default . .dot -}}
+{{- $annotations := default "" .annotations -}}
+{{- $labels := default (dict) .labels -}}
+{{- if $annotations -}}
+annotations:
+{{ include "common.tplValue" (dict "value" $annotations "context" $dot) | indent 2 }}
+{{- end }}
+name: {{ include "common.serviceMonitorName" $dot }}
+{{- if $dot.Values.metrics.serviceMonitor.namespace }}
+namespace: {{ $dot.Values.metrics.serviceMonitor.namespace }}
+{{- else }}
+namespace: {{ include "common.namespace" $dot }}
+{{- end }}
+labels: {{- include "common.labels" (dict "labels" $labels "dot" $dot) | nindent 2 }}
+{{- end -}}
+
+{{/*
+ Create service monitor template
+*/}}
+{{- define "common.serviceMonitor" -}}
+{{- $dot := default . .dot -}}
+{{- $labels := default (dict) .labels -}}
+apiVersion: monitoring.coreos.com/v1
+kind: ServiceMonitor
+metadata:
+{{- include "common.serviceMonitorMetadata" $dot | nindent 2 }}
+spec:
+ endpoints:
+ - path: {{ default "/metrics" $dot.Values.metrics.serviceMonitor.path }}
+ {{- if $dot.Values.metrics.serviceMonitor.port }}
+ port: {{ $dot.Values.metrics.serviceMonitor.port }}
+ {{- else if $dot.Values.metrics.serviceMonitor.targetPort }}
+ targetPort: {{ $dot.Values.metrics.serviceMonitor.targetPort }}
+ {{- else }}
+ port: metrics
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.basicAuth.enabled }}
+ basicAuth:
+ username:
+ key: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretUserKey }}
+ name: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretName }}
+ password:
+ key: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretPasswordKey }}
+ name: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretName }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.interval }}
+ interval: {{ $dot.Values.metrics.serviceMonitor.interval }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.scrapeTimeout }}
+ scrapeTimeout: {{ $dot.Values.metrics.serviceMonitor.scrapeTimeout }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.relabelings }}
+ relabelings: {{- include "common.tplValue" ( dict "value" $dot.Values.metrics.serviceMonitor.relabelings "context" $dot) | nindent 6 }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.metricRelabelings }}
+ metricRelabelings: {{- include "common.tplValue" ( dict "value" $dot.Values.metrics.serviceMonitor.metricRelabelings "context" $dot) | nindent 6 }}
+ {{- end }}
+ namespaceSelector:
+ matchNames:
+ - {{ include "common.namespace" $dot }}
+ selector:
+ {{- if $dot.Values.metrics.serviceMonitor.selector }}
+ matchLabels: {{- include "common.tplValue" ( dict "value" $dot.Values.metrics.serviceMonitor.selector "context" $dot) | nindent 6 }}
+ {{- else }}
+ matchLabels: {{- include "common.labels" (dict "labels" $labels "dot" $dot) | nindent 6 }}
+ {{- end }}
+{{- end -}}
{{/*
-# Copyright © 2020 Bitnami, Orange
+# Copyright © 2021 Bitnami, Orange, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# limitations under the License.
*/}}
-{{- if default false (and .Values.global.metrics.enabled .Values.global.metrics.custom_resources) }}
-apiVersion: monitoring.coreos.com/v1
-kind: ServiceMonitor
-metadata:
- name: {{ template "common.fullname" . }}
- {{- if .Values.metrics.serviceMonitor.namespace }}
- namespace: {{ .Values.metrics.serviceMonitor.namespace }}
- {{- else }}
- namespace: {{ include "common.namespace" . }}
- {{- end }}
- labels: {{- include "common.labels" . | nindent 4 }}
- {{- range $key, $value := .Values.metrics.serviceMonitor.selector }}
- {{ $key }}: {{ $value | quote }}
- {{- end }}
-spec:
- selector:
- matchLabels: {{- include "common.matchLabels" . | nindent 6 }}
- endpoints:
- - port: metrics
- {{- if .Values.metrics.serviceMonitor.interval }}
- interval: {{ .Values.metrics.serviceMonitor.interval }}
- {{- end }}
- {{- if .Values.metrics.serviceMonitor.scrapeTimeout }}
- scrapeTimeout: {{ .Values.metrics.serviceMonitor.scrapeTimeout }}
- {{- end }}
- {{- if .Values.metrics.serviceMonitor.relabelings }}
- relabelings: {{- include "common.tplValue" ( dict "value" .Values.metrics.serviceMonitor.relabelings "context" $) | nindent 8 }}
- {{- end }}
- {{- if .Values.metrics.serviceMonitor.metricRelabelings }}
- metricRelabelings: {{- include "common.tplValue" ( dict "value" .Values.metrics.serviceMonitor.metricRelabelings "context" $) | nindent 8 }}
- {{- end }}
- namespaceSelector:
- matchNames:
- - {{ .Release.Namespace }}
+{{- if .Values.metrics.serviceMonitor.enabled }}
+{{ include "common.serviceMonitor" . }}
{{- end }}
for line in `parse_yaml $filename`
do
#skiping commented line
- if [ "${line:0:1}" != '#' ]; then
+ if echo "$line" | grep -v '^#' >/dev/null; then
#find all image subtag inside converted values.yaml file's lines
if echo $line | grep -q $IMAGE_TEXT ; then
#find imageName inside line
-# Copyright © 2020 Samsung Electronics
+# Copyright © 2020 Samsung Electronics, Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2020 Samsung Electronics
+# Copyright © 2020 Samsung Electronics, Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# a part of this chart's package and will not
# be published independently to a repo (at this point)
repository: '@local'
+ - name: serviceAccount
+ version: ~8.x-0
+ repository: '@local'
+ - name: repositoryGenerator
+ version: ~8.x-0
+ repository: '@local'
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
resources: {{ include "common.resources" . | nindent 10 }}
+ serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
fsGroup: 1000
runAsUser: 100
runAsGroup: 1000
+
+#Pods Service Account
+serviceAccount:
+ nameOverride: consul-server
+ roles:
+ - read
- name: consul-server
version: ~8.x-0
repository: 'file://components/consul-server'
- condition: cds-command-executor.enabled
+ condition: consul-server.enabled
+ - name: serviceAccount
+ version: ~8.x-0
+ repository: '@local'
- mountPath: /consul/certs
name: consul-agent-certs-config
resources: {{ include "common.resources" . | nindent 10 }}
+ serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
volumes:
- name: consul-agent-config-dir
emptyDir: {}
fsGroup: 1000
runAsUser: 100
runAsGroup: 1000
+
+#Pods Service Account
+serviceAccount:
+ nameOverride: consul
+ roles:
+ - read
# Application Configuration Defaults.
#################################################################
# Application Image
-image: onap/org.onap.dcaegen2.services.mapper.vesadapter.universalvesadaptor:1.2.0
+image: onap/org.onap.dcaegen2.services.mapper.vesadapter.universalvesadaptor:1.3.0
pullPolicy: Always
# Log directory where logging sidecar should look for log files
disableNfsProvisioner: true
# application image
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:3.3.3
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:3.3.4
default_k8s_location: central
# DCAE component images to be deployed via Cloudify Manager
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.dcaegen2.deployments.cm-container:4.6.0
+image: onap/org.onap.dcaegen2.deployments.cm-container:4.6.1
pullPolicy: Always
# name of shared ConfigMap with kubeconfig for multiple clusters
importCloudify: https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
importK8S: plugin:k8splugin?version=>=3.5.1,<4.0.0
importPostgres: plugin:pgaas?version=1.3.0
- importClamp: plugin:clamppolicyplugin?version=1.1.0
+ importClamp: plugin:clamppolicyplugin?version=1.1.1
importDMaaP: plugin:dmaap?version=>=1.5.1,<2.0.0
useDmaapPlugin: false
bpResourcesCpuLimit: 250m
+++ /dev/null
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
-components/
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP External System Register
-name: esr
-version: 8.0.0
+++ /dev/null
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP External System Register GUI
-name: esr-gui
-version: 8.0.0
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
- - name: common
- version: ~8.x-0
- # local reference to common chart, as it is
- # a part of this chart's package and will not
- # be published independently to a repo (at this point)
- repository: '@local'
- - name: repositoryGenerator
- version: ~8.x-0
- repository: '@local'
+++ /dev/null
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- securityContext:
- runAsUser: 1000
- runAsGroup: 1001
- fsGroup: 1001
- initContainers:
- - command:
- - cp
- args:
- - -r
- - -T
- - /home/esr/tomcat
- - /opt/tomcat
- securityContext:
- privileged: true
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: create-tomcat-dir
- volumeMounts:
- - name: tomcat-workdir
- mountPath: /opt/tomcat
-
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- - name: MSB_ADDR
- value: {{ tpl .Values.msbaddr . }}
- volumeMounts:
- - name: tomcat-workdir
- mountPath: /home/esr/tomcat/
- resources:
-{{ include "common.resources" . | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
-
- volumes:
- - name: tomcat-workdir
- emptyDir: {}
-
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ include "common.servicename" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
- msb.onap.org/service-info: '[
- {
- "serviceName": "aai-esr-gui",
- "version": "v1",
- "url": "/esr-gui",
- "protocol": "UI",
- "port": "{{ .Values.service.internalPort }}",
- "visualRange":"1",
- "path":"/iui/aai-esr-gui"
- }
- ]'
-spec:
- ports:
- - port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- persistence: {}
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-image: onap/aai/esr-gui:1.4.0
-pullPolicy: Always
-msbaddr: msb-iag.{{ include "common.namespace" . }}:443
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- name: esr-gui
- internalPort: 8080
-
-ingress:
- enabled: false
-
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+++ /dev/null
-# Copyright © 2018 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP External System Register GUI
-name: esr-server
-version: 8.0.0
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
- - name: common
- version: ~8.x-0
- # local reference to common chart, as it is
- # a part of this chart's package and will not
- # be published independently to a repo (at this point)
- repository: '@local'
- - name: repositoryGenerator
- version: ~8.x-0
- repository: '@local'
+++ /dev/null
-{{/*
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- clean_inactive: 96h
-
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-# Copyright © 2018 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
--->
-
-<configuration scan="{{ .Values.log.scan.enabled }}" debug="{{ .Values.log.debug }}">
-
- <property name="componentName" value='{{default "UNSET_COMPONENT" .Values.log.componentName}}'/>
- <property name="subcomponentName" value='{{default "UNSET_SUBCOMPONENT" .Values.log.subcomponentName}}'/>
-
- <property name="logDir" value="{{ .Values.log.logDir }}" />
- <property name="queueSize" value="{{ .Values.log.queueSize }}"/>
-
- <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
- <property name="p_lvl" value="%level"/>
- <property name="p_log" value="%logger"/>
- <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
- <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
- <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
- <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
- <property name="p_thr" value="%thread"/>
- <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
-
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
-
- <property name="errorPattern" value="${p_tim}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
- <property name="debugPattern" value="${p_tim}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
- <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
- <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
-
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
-
- <!-- Console (human-readable) logging -->
- <property name="consolePattern" value="%nopexception${p_log}\t${p_tim}\t${p_lvl}\t%message\t${p_mdc}\t%rootException\t${p_mak}\t${p_thr}%n"/>
-
- <appender name="EELFAudit"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <encoder>
- <pattern>${auditPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
-
- <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <encoder>
- <pattern>${metricPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics"/>
- </appender>
-
- <appender name="EELFError"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- <encoder>
- <pattern>${errorPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError"/>
- </appender>
-
- <appender name="EELFDebug"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <encoder>
- <pattern>${debugPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
- <encoder>
- <pattern>${consolePattern}</pattern>
- </encoder>
- </appender>
-
- <logger name="com.att.eelf.audit" level="info" additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
-
- <logger name="com.att.eelf.metrics" level="info" additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
-
- <logger name="com.att.eelf.error" level="debug" additivity="false">
- <appender-ref ref="asyncEELFError" />
- </logger>
-
- <root level="{{ .Values.log.root.level }}">
- <appender-ref ref="asyncEELFDebug" />
- <appender-ref ref="STDOUT" />
- </root>
-
-</configuration>
\ No newline at end of file
+++ /dev/null
-# Copyright © 2018 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-log
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-esr-filebeat-configmap
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- securityContext:
- runAsUser: 1000
- runAsGroup: 1001
- fsGroup: 1001
- initContainers:
- - command:
- - cp
- args:
- - -r
- - -T
- - /home/esr/conf
- - /opt/conf
- securityContext:
- privileged: true
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: create-conf-dir
- volumeMounts:
- - name: conf-dir
- mountPath: /opt/conf
-
- containers:
- - name: {{ .Chart.Name }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- - name: MSB_ADDR
- value: {{ tpl .Values.msbaddr . }}
- volumeMounts:
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: /home/esr/works/logs
- name: {{ include "common.fullname" . }}-logs
- - mountPath: /home/esr/conf
- name: conf-dir
- resources:
-{{ include "common.resources" . | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
- # Filebeat sidecar container
- - name: {{ include "common.name" . }}-filebeat-onap
- securityContext:
- runAsUser: 1000
- runAsGroup: 1000
- image: {{ include "repositoryGenerator.image.logging" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- volumeMounts:
- - name: {{ include "common.fullname" . }}-filebeat-conf
- mountPath: /usr/share/filebeat/filebeat.yml
- subPath: filebeat.yml
- - name: {{ include "common.fullname" . }}-data-filebeat
- mountPath: /usr/share/filebeat/data
- - name: {{ include "common.fullname" . }}-logs
- mountPath: /var/log/onap/esr/esr-server
- - mountPath: /opt/ajsc/etc/config/logback.xml
- name: {{ include "common.fullname" . }}-log-conf
- subPath: logback.xml
- volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- - name: {{ include "common.fullname" . }}-log-conf
- configMap:
- name: {{ include "common.fullname" . }}-log
- - name: {{ include "common.fullname" . }}-filebeat-conf
- configMap:
- name: {{ include "common.fullname" . }}-esr-filebeat-configmap
- - name: {{ include "common.fullname" . }}-data-filebeat
- emptyDir: {}
- - name: {{ include "common.fullname" . }}-logs
- emptyDir: {}
- - name: conf-dir
- emptyDir: {}
-
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ include "common.servicename" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
- msb.onap.org/service-info: '[
- {
- "serviceName": "aai-esr-server",
- "version": "v1",
- "url": "/api/aai-esr-server/v1",
- "protocol": "REST",
- "port": "{{.Values.service.internalPort}}",
- "enable_ssl": true,
- "visualRange":"1"
- }
- ]'
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
-
-subChartsOnly:
- enabled: true
-
-# application image
-image: onap/aai/esr-server:1.5.2
-pullPolicy: Always
-msbaddr: msb-iag.{{ include "common.namespace" . }}:443
-
-# application configuration
-config:
- logstashServiceName: log-ls
- logstashPort: 5044
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- type: ClusterIP
- name: esr-server
- portName: esr-server
- externalPort: 9518
- internalPort: 9518
-
-ingress:
- enabled: false
-
-log:
- componentName: esr
- subcomponentName: esr-server
- debug: true
- scan:
- enabled: false
- logDir: /var/log/onap
- queueSize: 256
- root:
- level: INFO
-
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
- - name: esr-gui
- version: ~8.x-0
- repository: 'file://components/esr-gui'
- condition: esr-gui.enabled
- - name: esr-server
- version: ~8.x-0
- repository: 'file://components/esr-server'
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-
-# application configuration
-config:
- logstashServiceName: log-ls
- logstashPort: 5044
-
-esr-gui:
- enabled: true
\ No newline at end of file
RELEASE=$1
CHART_URL=$2
- FLAGS=${@:3}
- CHART_REPO="$(echo "$CHART_URL" |cut -d'/' -f1)"
- CHART_NAME="$(echo "$CHART_URL" |cut -d'/' -f2)"
+ FLAGS=$(echo ${@} | sed 's/^ *[^ ]* *[^ ]* *//')
+ CHART_REPO="$(echo "$CHART_URL" | cut -d'/' -f1)"
+ CHART_NAME="$(echo "$CHART_URL" | cut -d'/' -f2)"
if expr "$HELM_VER" : "v3\..*" ; then
CACHE_DIR=~/.local/share/helm/plugins/deploy/cache
else
usage
;;
*)
- deploy $1 $2 ${@:3}
+ deploy $1 $2 $(echo ${@} | sed 's/^ *[^ ]* *[^ ]* *//')
;;
esac
usage
;;
*)
- undeploy $1 ${@:2}
+ undeploy $1 $(echo ${@} | sed 's/^ *[^ ]* *//')
;;
esac
# If the user is trying to run Consul directly with some arguments, then
# pass them to Consul.
-if [ "${1:0:1}" = '-' ]; then
+if echo "$1" | grep '^-' >/dev/null; then
set -- consul "$@"
fi
version: ~8.x-0
repository: '@local'
condition: dmaap.enabled
- - name: esr
- version: ~8.x-0
- repository: '@local'
- condition: esr.enabled
- name: log
version: ~8.x-0
repository: '@local'
enabled: false
dmaap:
enabled: true
-esr:
- enabled: false
log:
enabled: false
mariadb-galera:
enabled: false
dmaap:
enabled: false
-esr:
- enabled: false
log:
enabled: false
log-logstash:
enabled: false
dmaap:
enabled: false
-esr:
- enabled: false
log:
enabled: false
sniro-emulator:
enabled: false
dmaap:
enabled: true
-esr:
- enabled: false
log:
enabled: false
mariadb-galera:
enabled: false
dmaap:
enabled: true
-esr:
- enabled: true
log:
enabled: true
sniro-emulator:
enabled: true
dmaap:
enabled: true
-esr:
- enabled: true
oof:
enabled: true
msb:
enabled: true
dmaap:
enabled: true
-esr:
- enabled: true
oof:
enabled: true
msb:
enabled: false
holmes:
enabled: false
-esr:
- enabled: false
log:
enabled: false
mariadb-galera:
enabled: false
dmaap:
enabled: false
-esr:
- enabled: false
# Today, "logging" chart that perform the central part of logging must also be
# enabled in order to make it work. So `logging.enabled` must have the same
# value than centralizedLoggingEnabled
"$@" --skip-networking --socket="${SOCKET}" &
mysql_note "Waiting for server startup"
local i
- for i in {30..0}; do
+ for i in $(seq 30 -1 0); do
# only use the root password if the database has already been initializaed
# so that it won't try to fill in a password file when it hasn't been set yet
extraArgs=""
installArgs=${installArgs}" --auth-root-authentication-method=normal"
fi
# "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here)
- mysql_install_db ${installArgs} "${@:2}"
+ mysql_install_db ${installArgs} "$(echo ${@} | sed 's/^ *[^ ]* *//')"
mysql_note "Database files initialized"
}
if [ -n "$MYSQL_DATABASE" ]; then
mysql_note "Giving user ${MYSQL_USER} access to schema ${MYSQL_DATABASE}"
- echo "GRANT ALL ON \`${MYSQL_DATABASE//_/\\_}\`.* TO '$MYSQL_USER'@'%' ;" |docker_process_sql --database=mysql
+ echo "GRANT ALL ON \`$(echo $MYSQL_DATABASE | sed 's@_@\\_@g')\`.* TO '$MYSQL_USER'@'%' ;" | docker_process_sql --database=mysql
fi
- echo "FLUSH PRIVILEGES ;" |docker_process_sql --database=mysql
+ echo "FLUSH PRIVILEGES ;" | docker_process_sql --database=mysql
fi
}
_main() {
# if command starts with an option, prepend mysqld
- if [ "${1:0:1}" = '-' ]; then
+ if echo "$1" | grep '^-' >/dev/null; then
set -- mysqld "$@"
fi
}
copy_server_certs_to_hvves () {
- for f in {ca.p12,server.p12}
+ for f in ca.p12 server.p12
do
kubectl cp $1/$f $2/$3:$4
done
}
copy_client_certs_to_robot () {
- for f in {ca.pem,client.key,client.pem}
+ for f in ca.pem client.key client.pem
do
kubectl cp $1/$f $2/$3:$4
done
}
cleanup () {
- rm -f $1/{ca,server,client}.???
+ rm -f $1/ca.??? $1/server.??? s$1/client.???
}
Code Review / oom.git / commitdiff