--- /dev/null
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+ #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+ paths:
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
+
+ # The below commented properties are for time-based rolling policy. But as the log4j 1.2x does not support time-based rolling these properties are not set
+ #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+ #ignore_older: 48h
+ # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+ #clean_inactive: 96h
+
+ #Multiline properties for log4j xml log events
+ multiline.pattern: '</log4j:event>'
+ multiline.negate: true
+ multiline.match: before
+ #multiline.max_lines: 500
+ #multiline.timeout: 5s
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+ #List of logstash server ip addresses with port number.
+ #But, in our case, this will be the loadbalancer IP address.
+ #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+ hosts: ["logstash.onap-log:5044"]
+ #If enable will do load balancing among availabe Logstash, automatically.
+ loadbalance: true
+
+ #The list of root certificates for server verifications.
+ #If certificate_authorities is empty or not set, the trusted
+ #certificate authorities of the host system are used.
+ #ssl.certificate_authorities: $ssl.certificate_authorities
+
+ #The path to the certificate for SSL client authentication. If the certificate is not specified,
+ #client authentication is not available.
+ #ssl.certificate: $ssl.certificate
+
+ #The client certificate key used for client authentication.
+ #ssl.key: $ssl.key
+
+ #The passphrase used to decrypt an encrypted key stored in the configured key file
+ #ssl.key_passphrase: $ssl.key_passphrase
--- /dev/null
+#{{ if not .Values.disableAppcAppc }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: appc-conf-configmap
+ namespace: {{ .Values.nsPrefix }}-appc
+data:
+{{ tpl (.Files.Glob "resources/config/conf/*").AsConfig . | indent 2 }}
+#{{ end }}
name: localtime
readOnly: true
- mountPath: /opt/openecomp/appc/data/properties/appc.properties
- name: appc-properties
+ name: appc-conf
+ subPath: appc.properties
- mountPath: /opt/openecomp/appc/data/properties/aaiclient.properties
- name: appc-aaiclient-properties
+ name: appc-conf
+ subPath: aaiclient.properties
- mountPath: /opt/onap/sdnc/data/properties/aaiclient.properties
- name: sdnc-aaiclient-properties
+ name: appc-conf
+ subPath: aaiclient.properties
- mountPath: /var/log/onap
name: appc-logs
- mountPath: /opt/opendaylight/current/etc/org.ops4j.pax.logging.cfg
name: appc-log-config
+ subPath: org.ops4j.pax.logging.cfg
ports:
- containerPort: 8181
- containerPort: 1830
volumeMounts:
- mountPath: /usr/share/filebeat/filebeat.yml
name: filebeat-conf
+ subPath: filebeat.yml
- mountPath: /var/log/onap
name: appc-logs
- mountPath: /usr/share/filebeat/data
hostPath:
path: /etc/localtime
- name: filebeat-conf
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/filebeat/log4j/filebeat.yml
+ configMap:
+ name: appc-filebeat-configmap
- name: appc-log-config
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/appc/org.ops4j.pax.logging.cfg
+ configMap:
+ name: appc-logging-cfg-configmap
- name: appc-logs
emptyDir: {}
- name: appc-data-filebeat
emptyDir: {}
- - name: appc-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/appc/conf/appc.properties
- - name: appc-aaiclient-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/appc/conf/aaiclient.properties
- - name: sdnc-aaiclient-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/conf/aaiclient.properties
+ - name: appc-conf
+ configMap:
+ name: appc-conf-configmap
imagePullSecrets:
- name: "{{ .Values.nsPrefix }}-docker-registry-key"
#{{ end }}
--- /dev/null
+#{{ if not .Values.disableAppcAppc }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: appc-filebeat-configmap
+ namespace: {{ .Values.nsPrefix }}-appc
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/log4j/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: appc-logging-cfg-configmap
+ namespace: {{ .Values.nsPrefix }}-appc
+data:
+{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }}
+#{{ end }}
--- /dev/null
+#{{ if not .Values.disableClampClampMariadb }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: clamp-entrypoint-initdb-configmap
+ namespace: {{ .Values.nsPrefix }}-clamp
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: clamp-entrypoint-drop-configmap
+ namespace: {{ .Values.nsPrefix }}-clamp
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/drop/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: clamp-entrypoint-bulkload-configmap
+ namespace: {{ .Values.nsPrefix }}-clamp
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: clamp-mariadb-conf-configmap
+ namespace: {{ .Values.nsPrefix }}-clamp
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }}
+#{{ end }}
- name: MYSQL_ROOT_PASSWORD
value: {{ .Values.mysqlPassword }}
volumeMounts:
- - mountPath: /docker-entrypoint-initdb.d
+ - mountPath: /docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh
name: docker-entrypoint-initdb
- - mountPath: /etc/mysql/conf.d
+ subPath: load-sql-files-tests-automation.sh
+ - mountPath: /docker-entrypoint-initdb.d/drop/
+ name: docker-entrypoint-clds-drop
+ - mountPath: /docker-entrypoint-initdb.d/bulkload/
+ name: docker-entrypoint-bulkload
+ - mountPath: /etc/mysql/conf.d/conf1/
name: clamp-mariadb-conf
- mountPath: /var/lib/mysql
name: clamp-mariadb-data
periodSeconds: 10
volumes:
- name: docker-entrypoint-initdb
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/clamp/mariadb/docker-entrypoint-initdb.d
+ configMap:
+ name: clamp-entrypoint-initdb-configmap
+ - name: docker-entrypoint-clds-drop
+ configMap:
+ name: clamp-entrypoint-drop-configmap
+ - name: docker-entrypoint-bulkload
+ configMap:
+ name: clamp-entrypoint-bulkload-configmap
- name: clamp-mariadb-conf
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/clamp/mariadb/conf.d
+ configMap:
+ name: clamp-mariadb-conf-configmap
- name: clamp-mariadb-data
persistentVolumeClaim:
claimName: clamp-db
imagePullSecrets:
- name: {{ .Values.nsPrefix }}-docker-registry-key
-#{{ end }}
\ No newline at end of file
+#{{ end }}
spec:
initContainers:
- command:
- - sysctl
- - -w
- - vm.max_map_count=262144
+ - /bin/sh
+ - -c
+ - |
+ sysctl -w vm.max_map_count=262144
+ mkdir -p /logroot/elasticsearch/logs
+ mkdir -p /logroot/elasticsearch/data
+ chmod -R 777 /logroot/elasticsearch
+ chown -R root:root /logroot
env:
- name: NAMESPACE
valueFrom:
image: {{ .Values.image.es_bb }}
imagePullPolicy: {{ .Values.pullPolicy }}
name: init-sysctl
+ volumeMounts:
+ - name: elasticsearch-logs
+ mountPath: /logroot/
containers:
- name: elasticsearch
image: {{ .Values.image.elasticsearch}}
claimName: elasticsearch-db
- name: elasticsearch-logs
hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/elasticsearch/logs
+ path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/
- name: elasticsearch-conf
configMap:
name: elasticsearch-configmap
nsPrefix: onap
-pullPolicy: Always
+pullPolicy: Always
nodePortPrefix: 302
image:
readiness: oomk8s/readiness-check:1.0.0
kibana: docker.elastic.co/kibana/kibana:5.5.0
elasticsearch: docker.elastic.co/elasticsearch/elasticsearch:5.5.0
es_bb: busybox
-
--- /dev/null
+#{{ if not .Values.disableMsoMariadb }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-confd-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-docker-entry-initd-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-automated-tests-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/automated-tests/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-bulkload-default-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/default/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-demo-dns-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/demo-dns/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-demo-vfw-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/demo-vfw/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-scripts-camunda-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/db-sql-scripts/camunda/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: mso-main-schemas-configmap
+ namespace: {{ .Values.nsPrefix }}-mso
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/db-sql-scripts/main-schemas/*").AsConfig . | indent 2 }}
+#{{ end }}
readOnly: true
- mountPath: /etc/mysql/conf.d
name: mso-mariadb-conf
- - mountPath: /docker-entrypoint-initdb.d
+ - mountPath: /docker-entrypoint-initdb.d/02-load-additional-changes.sh
name: mso-mariadb-docker-entrypoint-initdb
+ subPath: 02-load-additional-changes.sh
+ - mountPath: /docker-entrypoint-initdb.d/01-load-default-sql-files.sh
+ name: mso-mariadb-docker-entrypoint-initdb
+ subPath: 01-load-default-sql-files.sh
+ - mountPath: /docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/automated-tests
+ name: mso-mariadb-docker-entrypoint-automated-tests
+ - mountPath: /docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/default
+ name: mso-mariadb-docker-entrypoint-bulkload-default
+ - mountPath: /docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/demo-dns
+ name: mso-mariadb-docker-entrypoint-demo-dns
+ - mountPath: /docker-entrypoint-initdb.d/db-sql-scripts/bulkload-files/demo-vfw
+ name: mso-mariadb-docker-entrypoint-demo-vfw
+ - mountPath: /docker-entrypoint-initdb.d/db-sql-scripts/camunda
+ name: mso-mariadb-docker-entrypoint-camunda
+ - mountPath: /docker-entrypoint-initdb.d/db-sql-scripts/main-schemas
+ name: mso-mariadb-docker-entrypoint-main-schemas
- mountPath: /var/lib/mysql
name: mso-mariadb-data
ports:
initialDelaySeconds: 5
periodSeconds: 10
volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- name: mso-mariadb-conf
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/mso/mariadb/conf.d
+ configMap:
+ name: mso-confd-configmap
- name: mso-mariadb-docker-entrypoint-initdb
+ configMap:
+ name: mso-docker-entry-initd-configmap
+ - name: mso-mariadb-docker-entrypoint-automated-tests
+ configMap:
+ name: mso-automated-tests-configmap
+ - name: mso-mariadb-docker-entrypoint-bulkload-default
+ configMap:
+ name: mso-bulkload-default-configmap
+ - name: mso-mariadb-docker-entrypoint-demo-dns
+ configMap:
+ name: mso-demo-dns-configmap
+ - name: mso-mariadb-docker-entrypoint-demo-vfw
+ configMap:
+ name: mso-demo-vfw-configmap
+ - name: mso-mariadb-docker-entrypoint-camunda
+ configMap:
+ name: mso-scripts-camunda-configmap
+ - name: mso-mariadb-docker-entrypoint-main-schemas
+ configMap:
+ name: mso-main-schemas-configmap
+ - name: localtime
hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/mso/mariadb/docker-entrypoint-initdb.d
+ path: /etc/localtime
- name: mso-mariadb-data
persistentVolumeClaim:
claimName: mso-db
imagePullSecrets:
- name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
\ No newline at end of file
+#{{ end }}
--- /dev/null
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+ #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+ paths:
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
+ #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+ ignore_older: 48h
+ # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+ clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+ #List of logstash server ip addresses with port number.
+ #But, in our case, this will be the loadbalancer IP address.
+ #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+ hosts: ["logstash.onap-log:5044"]
+ #If enable will do load balancing among availabe Logstash, automatically.
+ loadbalance: true
+
+ #The list of root certificates for server verifications.
+ #If certificate_authorities is empty or not set, the trusted
+ #certificate authorities of the host system are used.
+ #ssl.certificate_authorities: $ssl.certificate_authorities
+
+ #The path to the certificate for SSL client authentication. If the certificate is not specified,
+ #client authentication is not available.
+ #ssl.certificate: $ssl.certificate
+
+ #The client certificate key used for client authentication.
+ #ssl.key: $ssl.key
+
+ #The passphrase used to decrypt an encrypted key stored in the configured key file
+ #ssl.key_passphrase: $ssl.key_passphrase
--- /dev/null
+#{{ if not .Values.disablePortalPortalapps }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: portal-onap-portal-sdk-configmap
+ namespace: {{ .Values.nsPrefix }}-portal
+data:
+{{ tpl (.Files.Glob "resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: portal-onap-portal-configmap
+ namespace: {{ .Values.nsPrefix }}-portal
+data:
+{{ tpl (.Files.Glob "resources/config/portal-fe/webapps/etc/ONAPPORTAL/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: portal-mariadb-configmap
+ namespace: {{ .Values.nsPrefix }}-portal
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/oom_updates.sql").AsConfig . | indent 2 }}
+#{{ end }}
+---
+#{{ if not .Values.disablePortalPortalwidgets }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: portal-onapwidgetms-configmap
+ namespace: {{ .Values.nsPrefix }}-portal
+data:
+{{ tpl (.Files.Glob "resources/config/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties").AsConfig . | indent 2 }}
+#{{ end }}
volumeMounts:
- mountPath: /portal-mysql/oom_updates.sql
name: portal-mariadb-onboarding-sql
+ subPath: oom_updates.sql
- mountPath: /portal_root/
name: portal-root
image: {{ .Values.image.mariadbClient }}
imagePullPolicy: {{ .Values.pullPolicy }}
name: provision-portaldb-users
+ - command: ["/bin/bash", "-c", "mkdir -p /ubuntu-init/ && chmod -R 777 /ubuntu-init/"]
+ volumeMounts:
+ - name: portal-logs
+ mountPath: /ubuntu-init/
+ image: {{ .Values.image.ubuntuInit }}
+ imagePullPolicy: {{ .Values.pullPolicy }}
+ name: portal-app-logs-init
containers:
- image: {{ .Values.image.portalapps }}
imagePullPolicy: {{ .Values.pullPolicy }}
name: localtime
readOnly: true
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTAL/WEB-INF/fusion/conf/fusion.properties"
- name: portal-fusion-properties
+ name: onap-portal-properties
+ subPath: fusion.properties
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTAL/WEB-INF/classes/openid-connect.properties"
- name: portal-openid-connect-properties
+ name: onap-portal-properties
+ subPath: openid-connect.properties
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTAL/WEB-INF/conf/system.properties"
- name: portal-system-properties
+ name: onap-portal-properties
+ subPath: system.properties
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTAL/WEB-INF/classes/portal.properties"
- name: portal-portal-properties
+ name: onap-portal-properties
+ subPath: portal.properties
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTAL/WEB-INF/classes/logback.xml"
name: portal-logback
+ subPath: logback.xml
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTALSDK/WEB-INF/conf/system.properties"
- name: sdkapp-system-properties
+ name: portal-sdkapp-properties
+ subPath: system.properties
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTALSDK/WEB-INF/classes/portal.properties"
- name: sdkapp-portal-properties
+ name: portal-sdkapp-properties
+ subPath: portal.properties
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTALSDK/WEB-INF/fusion/conf/fusion.properties"
- name: sdkapp-fusion-properties
+ name: portal-sdkapp-properties
+ subPath: fusion.properties
- mountPath: "{{ .Values.onapPortal.webappsDir }}/ONAPPORTALSDK/WEB-INF/classes/logback.xml"
name: sdkapp-logback
+ subPath: logback.xml
- mountPath: /portal_root/
name: portal-root
- mountPath: "{{ .Values.onapPortal.webappsDir }}/logs"
volumeMounts:
- mountPath: /usr/share/filebeat/filebeat.yml
name: filebeat-conf
+ subPath: filebeat.yml
- mountPath: /var/log/onap
name: portal-logs2
- mountPath: /usr/share/filebeat/data
hostPath:
path: /etc/localtime
- name: filebeat-conf
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/filebeat/logback/filebeat.yml
+ configMap:
+ name: portal-filebeat-configmap
- name: portal-logs2
emptyDir: {}
- name: portal-data-filebeat
emptyDir: {}
- - name: portal-fusion-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPPORTAL/fusion.properties
- - name: portal-openid-connect-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPPORTAL/openid-connect.properties
- - name: portal-system-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPPORTAL/system.properties
- - name: portal-portal-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPPORTAL/portal.properties
+ - name: onap-portal-properties
+ configMap:
+ defaultMode: 0755
+ name: portal-onap-portal-configmap
+ - name: portal-sdkapp-properties
+ configMap:
+ defaultMode: 0755
+ name: portal-onap-portal-sdk-configmap
- name: portal-logback
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/portal/onapportal/logback.xml
- - name: sdkapp-system-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPPORTALSDK/system.properties
- - name: sdkapp-portal-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPPORTALSDK/portal.properties
- - name: sdkapp-fusion-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPPORTALSDK/fusion.properties
+ configMap:
+ name: portal-onapportal-log-configmap
- name: sdkapp-logback
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/portal/onapportalsdk/logback.xml
+ configMap:
+ name: portal-onapportalsdk-log-configmap
- name: portal-mariadb-onboarding-sql
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/mariadb/oom_updates.sql
+ configMap:
+ name: portal-mariadb-configmap
- name: portal-root
hostPath:
path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal
--- /dev/null
+#{{ if not .Values.disablePortalPortalapps }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: portal-filebeat-configmap
+ namespace: {{ .Values.nsPrefix }}-portal
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: portal-onapportal-log-configmap
+ namespace: {{ .Values.nsPrefix }}-portal
+data:
+{{ tpl (.Files.Glob "resources/config/log/portal/onapportal/logback.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: portal-onapportalsdk-log-configmap
+ namespace: {{ .Values.nsPrefix }}-portal
+data:
+{{ tpl (.Files.Glob "resources/config/log/portal/onapportalsdk/logback.xml").AsConfig . | indent 2 }}
+#{{ end }}
+
name: portalapps-readiness
containers:
- image: {{ .Values.image.portalwms }}
- imagePullPolicy: {{ .Values.pullPolicy }}
+ imagePullPolicy: {{ .Values.pullPolicy }}
name: portalwidgets
volumeMounts:
- mountPath: /etc/localtime
readOnly: true
- mountPath: /application.properties
name: portalwidgets-application-properties
+ subPath: application.properties
ports:
- containerPort: 8082
readinessProbe:
hostPath:
path: /etc/localtime
- name: portalwidgets-application-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/portal/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties
+ configMap:
+ name: portal-onapwidgetms-configmap
imagePullSecrets:
- name: "{{ .Values.nsPrefix }}-docker-registry-key"
#{{ end }}
portalwms: nexus3.onap.org:10001/onap/portal-wms:v1.3.0
ubuntuDesktop: dorowu/ubuntu-desktop-lxde-vnc
filebeat: docker.elastic.co/beats/filebeat:5.5.0
+ ubuntuInit: oomk8s/ubuntu-init:1.0.0
onapPortal:
webappsDir: "/opt/apache-tomcat-8.0.37/webapps"
--- /dev/null
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+ #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+ paths:
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
+
+ # The below commented properties are for time-based rolling policy. But as the log4j 1.2x does not support time-based rolling these properties are not set
+ #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+ #ignore_older: 48h
+ # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+ #clean_inactive: 96h
+
+ #Multiline properties for log4j xml log events
+ multiline.pattern: '</log4j:event>'
+ multiline.negate: true
+ multiline.match: before
+ #multiline.max_lines: 500
+ #multiline.timeout: 5s
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+ #List of logstash server ip addresses with port number.
+ #But, in our case, this will be the loadbalancer IP address.
+ #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+ hosts: ["logstash.onap-log:5044"]
+ #If enable will do load balancing among availabe Logstash, automatically.
+ loadbalance: true
+
+ #The list of root certificates for server verifications.
+ #If certificate_authorities is empty or not set, the trusted
+ #certificate authorities of the host system are used.
+ #ssl.certificate_authorities: $ssl.certificate_authorities
+
+ #The path to the certificate for SSL client authentication. If the certificate is not specified,
+ #client authentication is not available.
+ #ssl.certificate: $ssl.certificate
+
+ #The client certificate key used for client authentication.
+ #ssl.key: $ssl.key
+
+ #The passphrase used to decrypt an encrypted key stored in the configured key file
+ #ssl.key_passphrase: $ssl.key_passphrase
--- /dev/null
+#{{ if not .Values.disableSdncSdnc }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: sdnc-conf-configmap
+ namespace: {{ .Values.nsPrefix }}-sdnc
+data:
+{{ tpl (.Files.Glob "resources/config/conf/*").AsConfig . | indent 2 }}
+#{{ end }}
--- /dev/null
+#{{ if not .Values.disableSdncSdnc }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: sdnc-log-configmap
+ namespace: {{ .Values.nsPrefix }}-sdnc
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/log4j/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: sdnc-logging-cfg-configmap
+ namespace: {{ .Values.nsPrefix }}-sdnc
+data:
+{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }}
+#{{ end }}
- mountPath: /etc/localtime
name: localtime
readOnly: true
- - mountPath: /opt/onap/sdnc/data/properties/aaiclient.properties
- name: sdnc-aaiclient-properties
- mountPath: /opt/onap/sdnc/data/properties/admportal.json
- name: sdnc-admportal-json
+ name: sdnc-conf
+ subPath: admportal.json
+ - mountPath: /opt/onap/sdnc/data/properties/aaiclient.properties
+ name: sdnc-conf
+ subPath: aaiclient.properties
- mountPath: /var/log/onap
name: sdnc-logs
- mountPath: /opt/opendaylight/current/etc/org.ops4j.pax.logging.cfg
- name: sdnc-log-config
+ name: sdnc-logging-cfg-config
+ subPath: org.ops4j.pax.logging.cfg
ports:
- containerPort: 8181
- containerPort: 8101
volumeMounts:
- mountPath: /usr/share/filebeat/filebeat.yml
name: filebeat-conf
+ subPath: filebeat.yml
- mountPath: /var/log/onap
name: sdnc-logs
- mountPath: /usr/share/filebeat/data
hostPath:
path: /etc/localtime
- name: filebeat-conf
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/filebeat/log4j/filebeat.yml
- - name: sdnc-log-config
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/log/sdnc/org.ops4j.pax.logging.cfg
+ configMap:
+ name: sdnc-log-configmap
+ - name: sdnc-logging-cfg-config
+ configMap:
+ name: sdnc-logging-cfg-configmap
- name: sdnc-logs
emptyDir: {}
- name: sdnc-data-filebeat
emptyDir: {}
- - name: sdnc-aaiclient-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/conf/aaiclient.properties
- - name: sdnc-admportal-json
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/conf/admportal.json
+ - name: sdnc-conf
+ configMap:
+ name: sdnc-conf-configmap
+ items:
+ - key: admportal.json
+ path: admportal.json
+ mode: 0755
+ - key: aaiclient.properties
+ path: aaiclient.properties
+ mode: 0755
imagePullSecrets:
- name: "{{ .Values.nsPrefix }}-docker-registry-key"
#{{ end }}
- name: localtime
mountPath: /etc/localtime
readOnly: true
- - mountPath: /opt/onap/sdnc/data/properties/aaiclient.properties
- name: sdnc-aaiclient-properties
- - mountPath: /opt/onap/sdnc/data/properties/admportal.json
- name: sdnc-admportal-json
+ - mountPath: /opt/onap/sdnc/data/properties/
+ name: sdnc-conf
readinessProbe:
tcpSocket:
port: 8843
- name: localtime
hostPath:
path: /etc/localtime
- - name: sdnc-aaiclient-properties
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/conf/aaiclient.properties
- - name: sdnc-admportal-json
- hostPath:
- path: /dockerdata-nfs/{{ .Values.nsPrefix }}/sdnc/conf/admportal.json
+ - name: sdnc-conf
+ configMap:
+ name: sdnc-conf-configmap
imagePullSecrets:
- name: "{{ .Values.nsPrefix }}-docker-registry-key"
#{{ end }}
Code Review / oom.git / commitdiff