periodSeconds: 30
service:
- type: NodePort
+ type: ClusterIP
name: aaf-sms
portName: aaf-sms
internalPort: 10443
- nodePort: 43
+ externalPort: 10443
persistence:
enabled: true
{
"type": "VF",
"name": "generic-vnf",
- "deleteFlag": false,
+ "deleteFlag": true,
"modelVersionId": "93a6166f-b3d5-4f06-b4ba-aed48d009ad9",
"modelInvariantId": "acc6edd8-a8d4-4b93-afaa-0994068be14c"
},
#################################################################
# application image
-image: onap/champ:1.3.0
+image: onap/champ:1.4-STAGING-latest
flavor: small
# HTTP
# basic (challenging)
# proxy (not challenging, needs xff)
-# kerberos (challenging) NOT FREE FOR COMMERCIAL
+# kerberos (challenging)
# clientcert (not challenging, needs https)
-# jwt (not challenging) NOT FREE FOR COMMERCIAL
+# jwt (not challenging)
# host (not challenging) #DEPRECATED, will be removed in a future version.
# host based authentication is configurable in sg_roles_mapping
# Authc
# internal
# noop
-# ldap NOT FREE FOR COMMERCIAL USE
+# ldap
# Authz
-# ldap NOT FREE FOR COMMERCIAL USE
+# ldap
# noop
searchguard:
# Set filtered_alias_mode to 'nowarn' to allow more than 2 filtered aliases per index silently
#filtered_alias_mode: warn
#kibana:
- # Kibana multitenancy - NOT FREE FOR COMMERCIAL USE
+ # Kibana multitenancy
# see https://github.com/floragunncom/search-guard-docs/blob/master/multitenancy.md
# To make this work you need to install https://github.com/floragunncom/search-guard-module-kibana-multitenancy/wiki
#multitenancy_enabled: true
transport_enabled: false
order: 6
http_authenticator:
- type: kerberos # NOT FREE FOR COMMERCIAL USE
+ type: kerberos
challenge: true
config:
# If true a lot of kerberos/security related debugging output will be logged to standard out
challenge: false
authentication_backend:
# LDAP authentication backend (authenticate users against a LDAP or Active Directory)
- type: ldap # NOT FREE FOR COMMERCIAL USE
+ type: ldap
config:
# enable ldaps
enable_ssl: false
transport_enabled: false
authorization_backend:
# LDAP authorization backend (gather roles from a LDAP or Active Directory, you have to configure the above LDAP authentication backend settings too)
- type: ldap # NOT FREE FOR COMMERCIAL USE
+ type: ldap
config:
# enable ldaps
enable_ssl: false
roles_from_another_ldap:
enabled: false
authorization_backend:
- type: ldap # NOT FREE FOR COMMERCIAL USE
+ type: ldap
#config goes here ...
-2otP92kNFHdexroZxvgYY7ffslFiwCD3CiVYMIfUF2edqZK7972NwkvE_mbaBo6jh8lByLIqrWAf
-jyzoiVsvQ_kCa0cS1xaRLpcxv3bx1b7o3hGPBqpd6vmSG4y2JLzNlCBZWuTJz827wr8p_fWrYuUm
-4L1WoaEe8W5PRnXjl4hDqbJBAlEoRIBXugUDt_7O5wgx2Rl3HVoOczZtf0RzONZ1F0BmKf3QlAUe
-moSbARitYRgIPt5sLbT7qPyoEpGDhQ1XBowR744-wsjBc-14yO62Ajp5xWKTp15uWn3_HHuw1SAf
-GWSBRGlSlEVkXQqi9Hw5jDttKVzHX1ckwR0SQOirbtHPHplxPX3WKjKhSdSeMzw6LOAHIQYRMKBT
-74oGnULAfPtV7TaGwOKriT3P49CoPdt9On89-LGyCZSxDWKH0K-rgB6I2_hPT2Uzr3jmXiMa-sfh
-iMvyQ7ABBVx0OFsUuNb5mcU2O6dWiQreL5RerrloV_X3ZtnNjxENXKjQ5KBR1A5ISPjFFK-kf4Rb
-p6FSII8LcsiqgdWuZ4GX_C6x8HX4A-vD0x3Uc9CfoXY-k23cNIy-R-W-oB-P2OgdWDNgZ7VaOLNt
-3L-NwWpNblfYvs93cNmkbVAwCZ3r0OP7RFeuON84TRaynK_Fh2S3rypRyJcUmM1pvpZqJ5_-umSW
-hUs1OqkdLv3xjlVzzK-3nMr0q3Zcyp4XdyLYtcX5I3Xqk9ZcsyAT7ghmHhV8KjUjue7OcfAWg0m7
-RJLGq6VC8HeK4HEMa4lF677Qh7DRufghIDEmQSIDfGA790WGSA8HqcOvAL4hURCHyCWiPa5i8ksX
-xX4HyqF8PCVCLJ_ZhzcuIlc0jStAexWbJU_vcyX7XgUaHCkF-M-zv1FP6Z3DHBMD2QqSWjmyNCCk
-8sIuwzs62P_j2o9jG33kssedCrUWOwZancU107-5H0Zw-UWvtCqUfmRZ7TsEbWY7lk_SKfLfAN5q
-ncOQgU_VxDXUFDST4LN_WVECRafK3UtwWomxWSji25Lbf6NVni3ok-yLMDZR-wrE-54jLPES9j0i
-5N0xrk9CfsvGUpUZ1_XQcgaxI6m27DtCCJXb5ywenPBiUIJCMCTq88CqNZxGpju2i4BJcUH2hUHe
-GKhO8pgslwhtEVot9EDwdzSrJkWFCfb6ud4zMxrqdi7-mLWMOydg6lhpEFEX5wu2BLIujGsZlEGE
-_K9jGfBypjXuJCKDZIuPfEnf_7idjKis_JcFB7x4Hx2HHDcBjlWWFZN_VIEnPkQSyZEC26RTFP3k
-zkY3GwUfA36a4XW2pu3gE9wz-W6fkONfzOZ6YiyCm_dRFUVuGSdJG02Hh5iXYlMOGJltPzWH2jVf
-S-QTOmXQTKSOheXoJO6O-9uQbsRf-kq-6w1pvIOp4ms35w4_0Xj0Xr2a9y-L9PdBZvrUsa-jxsZU
-LyA-YY4Ej6QwDBDTD2MGjF1E5_ekYgjoNlltM9rJjofruM4ym0n7LPHC7YXXQSEFOZYeTKi6wUDw
-hQ1DoWHgu4PQ2lexada8sxQdConbPe2iW16h-PrO5D12E4XbT00fqaMlBmjQwzdNRdCC2NRPIQ5W
-nwaO8dZ9yjxsjT7ZVHb9-DRblb3XDocponzxVXqUGtJAie4WXQnerX0ApTWGaHEr5y56JJVS_3LP
-bKrbXBXcs4jTUX4ECXRrOs8JQDQNysXhvTPCu0XUxNZpjx6KLxDs93k2OcESHjl5J6n6OKKJqqoN
-JEyFO5LGXpnmUJbn0-CaHHPRI1mHwEu4brY8wDZd9A0PD1KGXDoCHMfEk1lGblQdyOcVrXZ6uSBk
-Z6zHDnwSCHO1mPYqtelJQehZoFuPSv9PIgKLxs_qJOtZFnXII5YO1mGXgiIBWBjUFDR5HG4ENS6y
-J4MCF-JLMp-PVMAkOaCIQRRDpRnMm_fT1sc_P562Diu_pcdt-r55pMFQYGoGfjRmxQBKk0-SsdnP
-mlZIiis9DfQEN0q3QQdNRYBJD7tmhUwhAPZdLgXqJA8sZf8UyFQhhpsky79NT343YL9smUlF
\ No newline at end of file
+yf1wUdfxbhVQQq5UF8hzWB_01VVrRIkC8BaLT7NMTrmv30RsMj3lvlaX3_CnVC1emYgmiUfWnT7k
+brk0m-URJAKM8Pm6PrnOyKlx3U7NS8HVcFdKpVm_bx0CFsA3eY2NGe-D0gd35V1MohCbABZ8G2a6
+AgE7QmToHCwclXW_goK5P7lmJX1HaMVAIydMreP1m9sSR4UboRlvkH6VsMM1H1Y9ZhhXF--RkWAM
+EcIspNTQE4ef3ZvYtSzuWssGZP8Hjo4XJlXz1uCSkyczw0IR19n-lspF9S0cIMro6QqvJsyjyjRo
+UdYgxdwmQ_st4P43TZ8YEBQyE8r7VUoh_EqUx9ldilxGA0kBOQcTdtd805Kf98grXiQXeT-8UD1L
+02aLzbz8Md7f8foGS1oGLfoImdjYCzOOZs3qHmKSb6YoHY8VcBCxIEfCznYl8wLYLRsSZ0tV4SAM
+qCM_KHOM0HOZrNfSSAW5ZVZb67U9NI9SLFRV8gkmqxMspfjSLJCyHhq0D6RMECSpeAeVgoh6SWDw
+mBSXunY5ZWVzdUyEezjCcl3NqTahrlfMSV5xkfUmSNFe_WW9rIXF0vD6MHAEW62yA1OA8WoMUqp2
+VKkUzWGVGAdMvbU52D6hqmGXER44kxAHVgEwPdhQhqgk4BpjR2v9ozQ6E_xNGkSRnriNB-H6BSN0
+vZa0pNJfvmBCjwGeoyRbCJrN1grLoDHQ3_6g-IwsD3NugKp6SHxUgfiPAUMGz-J2ZdbAlU0SNQgM
+8gn6_cOaXvhqHBwh9SfT4jXyuCJru0zw3pyOjuw6fLMezvJDPvFfIgWllzc2IQ7_bufMZgCr2yAe
+O-nBzsXK8aqItzCti53sZLSM1YC6OuRaiIt2i0yTVa7koFYSFhyELqEco5cFKMs0c6SrgIxnRrBT
+x0RPXIyLdiRr76uP2wxL8KDfJ1vbCKi1xkZRchvQfm3ssgpzXVz8lnZ-HxacEhhAfGdDV56ZgRhu
+5UVQd2RdP9JVpnXRJPhVwlQeQlrIXWHp01efBPRMTZQd2lpaNqn5v5chzpi9bbM3P3-BLxnN2NID
+dv1E9Ox7MH-m3IQT9yFUi-UrDxAId4dnpgeCvyxhfnc1HJ9B71x9wmryC9PJWiKs3K-T_eC9pR4o
+eN5PUZZ7arwdMUmzqKPNAtyMqaJCWfD3GZ1KsC8OV5Ze0DRQZPeT3IHg2BUC1NGj2SdjcwaGP_zl
+uytFZWN7kQjnI4brorkO_jzjf7SEPCO7Vy2Z2vikIv7O8bSWZWDGYCcxUoYigFYcjZFirRYr3Yvl
+YZU-F_qh6ZvrVxStSpz6iYDAzPW9v4ZyLSHyWe5H2AN89uRdnvag1769KpjsmGVYbn5jabgCJFs8
+EL7rxymrXri5cKsGH8XC1E0a-kP6vvhdHJhx5eFsFmKJaWh3RCJ8_I5CSzSRsK8JvE1Z6nGFn_SI
+dpeNjf66lbm4y68loUh5Q4BDce3YaCT1gHmluBzXnv1vFzuvJ2jcVyq-nUDjdTqvM9okW8Prmt7l
+ttQ3MVZI4rd-tXJfV4lxaI6wF4LIwiMJmY2tiCHoJ5nbLfHvMG7G5K1NAbizPltQxURPiMPZeCDZ
+15SXI9vdCR-FyQikzp1hUUMMqz231-6BDDTKMOXpicQRQ0CHpEfxY4Rq3mu0QmRi-EIs6JAzfuLi
+ba7fbfHnkhl3GWkj0CVZD8uDbzJceSTHICqVt-3qECUSG3ZfsuebWAEWED_xQoXyAL7kK8fMOPwl
+m6qEk4z7boiJSrcQ2ZIdyPs2bZNvlv4wYg0F3BhFf2HeCYwR3BKXQGlDXGOAD5GuRpHHBch9JfVa
+iUbvCEF23mee633C_K4zCaaVR9UqXMefzqFxSsobMp3heo3eIcQzLhe2SL2xpI9TbsvN2N4c9UMk
+_TnQBHiYBgPxtB_j8bnVu7C__lTTpPKYLpUPxgWEIzljZzbkF37QQ1XtAc2EzcOi2FT4qsjlNgPw
+PbL6ZihWEYZrZUilTSLzzjcQDLzoaF6BL2LOOS-Uju-B7COhcSMc0JLYOob6RDBE9T6HUMuZ
# Properties Generated by AT&T Certificate Manager
# @copyright 2016, AT&T
############################################################
-cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US
+cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
cadi_keyfile=/opt/app/aai-resources/resources/aaf/org.onap.aai.keyfile
cadi_keystore=/opt/app/aai-resources/resources/aaf/org.onap.aai.p12
-cadi_keystore_password=enc:383RDJRFA6yQz9AOxUxC1iIg3xTJXityw05MswnpnEtelRQy2D4r5INQjrea7GTV
-#cadi_key_password=enc:<KEY PASSWORD (optional if the same as KEYSTORE PASSWORD)>
+cadi_keystore_password=enc:nF3D1h00vVoLZkCnFtTCJAiH6maEiA3933rI3ctap9Ggjlm2SMg_dxk6ui9iiDwr
+#cadi_key_password=enc:9xs_lJ9QQRDoMcHqLbGg40-gefGrw-sLMjWL40ejbyqdC7Jt_pQfY6ajBLGcbLuL
cadi_alias=aai@aai.onap.org
cadi_truststore=/opt/app/aai-resources/resources/aaf/truststoreONAPall.jks
-cadi_truststore_password=enc:s77wlnZFoQ08NhnU3OSeWO6uKgRwC6sAK-wTvVubNz2
+cadi_truststore_password=enc:8BxmWFFRI9wcf2jVixnfdK2GPI4veaXofZ65fcYThHv
cadi_loglevel=INFO
cadi_bath_convert=/opt/app/aai-resources/resources/aaf/bath_config.csv
"visualRange": "1",
"path": "/aai/v14/cloud-infrastructure"
},
+ {
+ "serviceName": "_aai-cloudInfrastructure",
+ "version": "v15",
+ "url": "/aai/v15/cloud-infrastructure",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/cloud-infrastructure"
+ },
+ {
+ "serviceName": "_aai-cloudInfrastructure",
+ "version": "v16",
+ "url": "/aai/v16/cloud-infrastructure",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/cloud-infrastructure"
+ },
{
"serviceName": "_aai-business",
"version": "v11",
"visualRange": "1",
"path": "/aai/v14/business"
},
+ {
+ "serviceName": "_aai-business",
+ "version": "v15",
+ "url": "/aai/v15/business",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/business"
+ },
+ {
+ "serviceName": "_aai-business",
+ "version": "v16",
+ "url": "/aai/v16/business",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/business"
+ },
{
"serviceName": "_aai-actions",
"version": "v11",
"visualRange": "1",
"path": "/aai/v14/actions"
},
+ {
+ "serviceName": "_aai-actions",
+ "version": "v15",
+ "url": "/aai/v15/actions",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/actions"
+ },
+ {
+ "serviceName": "_aai-actions",
+ "version": "v16",
+ "url": "/aai/v16/actions",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/actions"
+ },
{
"serviceName": "_aai-service-design-and-creation",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1",
"path": "/aai/v14/service-design-and-creation"
+ },
+ {
+ "serviceName": "_aai-service-design-and-creation",
+ "version": "v15",
+ "url": "/aai/v15/service-design-and-creation",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/service-design-and-creation"
+ },
+ {
+ "serviceName": "_aai-service-design-and-creation",
+ "version": "v16",
+ "url": "/aai/v16/service-design-and-creation",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/service-design-and-creation"
},
{
"serviceName": "_aai-network",
"visualRange": "1",
"path": "/aai/v14/network"
},
+ {
+ "serviceName": "_aai-network",
+ "version": "v15",
+ "url": "/aai/v15/network",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/network"
+ },
+ {
+ "serviceName": "_aai-network",
+ "version": "v16",
+ "url": "/aai/v16/network",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/network"
+ },
{
"serviceName": "_aai-externalSystem",
"version": "v11",
"visualRange": "1",
"path": "/aai/v14/external-system"
},
+ {
+ "serviceName": "_aai-externalSystem",
+ "version": "v15",
+ "url": "/aai/v15/external-system",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/external-system"
+ },
+ {
+ "serviceName": "_aai-externalSystem",
+ "version": "v16",
+ "url": "/aai/v16/external-system",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/external-system"
+ },
{
"serviceName": "aai-cloudInfrastructure",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-cloudInfrastructure",
+ "version": "v15",
+ "url": "/aai/v15/cloud-infrastructure",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-cloudInfrastructure",
+ "version": "v16",
+ "url": "/aai/v16/cloud-infrastructure",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-business",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-business",
+ "version": "v15",
+ "url": "/aai/v15/business",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-business",
+ "version": "v16",
+ "url": "/aai/v16/business",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-actions",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-actions",
+ "version": "v15",
+ "url": "/aai/v15/actions",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-actions",
+ "version": "v16",
+ "url": "/aai/v16/actions",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-service-design-and-creation",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-service-design-and-creation",
+ "version": "v15",
+ "url": "/aai/v15/service-design-and-creation",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-service-design-and-creation",
+ "version": "v16",
+ "url": "/aai/v16/service-design-and-creation",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-network",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-network",
+ "version": "v15",
+ "url": "/aai/v15/network",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-network",
+ "version": "v16",
+ "url": "/aai/v16/network",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-externalSystem",
"version": "v11",
"enable_ssl": true,
"lb_policy":"ip_hash",
"visualRange": "1"
+ },
+ {
+ "serviceName": "aai-externalSystem",
+ "version": "v15",
+ "url": "/aai/v15/external-system",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-externalSystem",
+ "version": "v16",
+ "url": "/aai/v16/external-system",
+ "protocol": "REST",
+ "port": "8447",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
}
]'
spec:
-2otP92kNFHdexroZxvgYY7ffslFiwCD3CiVYMIfUF2edqZK7972NwkvE_mbaBo6jh8lByLIqrWAf
-jyzoiVsvQ_kCa0cS1xaRLpcxv3bx1b7o3hGPBqpd6vmSG4y2JLzNlCBZWuTJz827wr8p_fWrYuUm
-4L1WoaEe8W5PRnXjl4hDqbJBAlEoRIBXugUDt_7O5wgx2Rl3HVoOczZtf0RzONZ1F0BmKf3QlAUe
-moSbARitYRgIPt5sLbT7qPyoEpGDhQ1XBowR744-wsjBc-14yO62Ajp5xWKTp15uWn3_HHuw1SAf
-GWSBRGlSlEVkXQqi9Hw5jDttKVzHX1ckwR0SQOirbtHPHplxPX3WKjKhSdSeMzw6LOAHIQYRMKBT
-74oGnULAfPtV7TaGwOKriT3P49CoPdt9On89-LGyCZSxDWKH0K-rgB6I2_hPT2Uzr3jmXiMa-sfh
-iMvyQ7ABBVx0OFsUuNb5mcU2O6dWiQreL5RerrloV_X3ZtnNjxENXKjQ5KBR1A5ISPjFFK-kf4Rb
-p6FSII8LcsiqgdWuZ4GX_C6x8HX4A-vD0x3Uc9CfoXY-k23cNIy-R-W-oB-P2OgdWDNgZ7VaOLNt
-3L-NwWpNblfYvs93cNmkbVAwCZ3r0OP7RFeuON84TRaynK_Fh2S3rypRyJcUmM1pvpZqJ5_-umSW
-hUs1OqkdLv3xjlVzzK-3nMr0q3Zcyp4XdyLYtcX5I3Xqk9ZcsyAT7ghmHhV8KjUjue7OcfAWg0m7
-RJLGq6VC8HeK4HEMa4lF677Qh7DRufghIDEmQSIDfGA790WGSA8HqcOvAL4hURCHyCWiPa5i8ksX
-xX4HyqF8PCVCLJ_ZhzcuIlc0jStAexWbJU_vcyX7XgUaHCkF-M-zv1FP6Z3DHBMD2QqSWjmyNCCk
-8sIuwzs62P_j2o9jG33kssedCrUWOwZancU107-5H0Zw-UWvtCqUfmRZ7TsEbWY7lk_SKfLfAN5q
-ncOQgU_VxDXUFDST4LN_WVECRafK3UtwWomxWSji25Lbf6NVni3ok-yLMDZR-wrE-54jLPES9j0i
-5N0xrk9CfsvGUpUZ1_XQcgaxI6m27DtCCJXb5ywenPBiUIJCMCTq88CqNZxGpju2i4BJcUH2hUHe
-GKhO8pgslwhtEVot9EDwdzSrJkWFCfb6ud4zMxrqdi7-mLWMOydg6lhpEFEX5wu2BLIujGsZlEGE
-_K9jGfBypjXuJCKDZIuPfEnf_7idjKis_JcFB7x4Hx2HHDcBjlWWFZN_VIEnPkQSyZEC26RTFP3k
-zkY3GwUfA36a4XW2pu3gE9wz-W6fkONfzOZ6YiyCm_dRFUVuGSdJG02Hh5iXYlMOGJltPzWH2jVf
-S-QTOmXQTKSOheXoJO6O-9uQbsRf-kq-6w1pvIOp4ms35w4_0Xj0Xr2a9y-L9PdBZvrUsa-jxsZU
-LyA-YY4Ej6QwDBDTD2MGjF1E5_ekYgjoNlltM9rJjofruM4ym0n7LPHC7YXXQSEFOZYeTKi6wUDw
-hQ1DoWHgu4PQ2lexada8sxQdConbPe2iW16h-PrO5D12E4XbT00fqaMlBmjQwzdNRdCC2NRPIQ5W
-nwaO8dZ9yjxsjT7ZVHb9-DRblb3XDocponzxVXqUGtJAie4WXQnerX0ApTWGaHEr5y56JJVS_3LP
-bKrbXBXcs4jTUX4ECXRrOs8JQDQNysXhvTPCu0XUxNZpjx6KLxDs93k2OcESHjl5J6n6OKKJqqoN
-JEyFO5LGXpnmUJbn0-CaHHPRI1mHwEu4brY8wDZd9A0PD1KGXDoCHMfEk1lGblQdyOcVrXZ6uSBk
-Z6zHDnwSCHO1mPYqtelJQehZoFuPSv9PIgKLxs_qJOtZFnXII5YO1mGXgiIBWBjUFDR5HG4ENS6y
-J4MCF-JLMp-PVMAkOaCIQRRDpRnMm_fT1sc_P562Diu_pcdt-r55pMFQYGoGfjRmxQBKk0-SsdnP
-mlZIiis9DfQEN0q3QQdNRYBJD7tmhUwhAPZdLgXqJA8sZf8UyFQhhpsky79NT343YL9smUlF
\ No newline at end of file
+yf1wUdfxbhVQQq5UF8hzWB_01VVrRIkC8BaLT7NMTrmv30RsMj3lvlaX3_CnVC1emYgmiUfWnT7k
+brk0m-URJAKM8Pm6PrnOyKlx3U7NS8HVcFdKpVm_bx0CFsA3eY2NGe-D0gd35V1MohCbABZ8G2a6
+AgE7QmToHCwclXW_goK5P7lmJX1HaMVAIydMreP1m9sSR4UboRlvkH6VsMM1H1Y9ZhhXF--RkWAM
+EcIspNTQE4ef3ZvYtSzuWssGZP8Hjo4XJlXz1uCSkyczw0IR19n-lspF9S0cIMro6QqvJsyjyjRo
+UdYgxdwmQ_st4P43TZ8YEBQyE8r7VUoh_EqUx9ldilxGA0kBOQcTdtd805Kf98grXiQXeT-8UD1L
+02aLzbz8Md7f8foGS1oGLfoImdjYCzOOZs3qHmKSb6YoHY8VcBCxIEfCznYl8wLYLRsSZ0tV4SAM
+qCM_KHOM0HOZrNfSSAW5ZVZb67U9NI9SLFRV8gkmqxMspfjSLJCyHhq0D6RMECSpeAeVgoh6SWDw
+mBSXunY5ZWVzdUyEezjCcl3NqTahrlfMSV5xkfUmSNFe_WW9rIXF0vD6MHAEW62yA1OA8WoMUqp2
+VKkUzWGVGAdMvbU52D6hqmGXER44kxAHVgEwPdhQhqgk4BpjR2v9ozQ6E_xNGkSRnriNB-H6BSN0
+vZa0pNJfvmBCjwGeoyRbCJrN1grLoDHQ3_6g-IwsD3NugKp6SHxUgfiPAUMGz-J2ZdbAlU0SNQgM
+8gn6_cOaXvhqHBwh9SfT4jXyuCJru0zw3pyOjuw6fLMezvJDPvFfIgWllzc2IQ7_bufMZgCr2yAe
+O-nBzsXK8aqItzCti53sZLSM1YC6OuRaiIt2i0yTVa7koFYSFhyELqEco5cFKMs0c6SrgIxnRrBT
+x0RPXIyLdiRr76uP2wxL8KDfJ1vbCKi1xkZRchvQfm3ssgpzXVz8lnZ-HxacEhhAfGdDV56ZgRhu
+5UVQd2RdP9JVpnXRJPhVwlQeQlrIXWHp01efBPRMTZQd2lpaNqn5v5chzpi9bbM3P3-BLxnN2NID
+dv1E9Ox7MH-m3IQT9yFUi-UrDxAId4dnpgeCvyxhfnc1HJ9B71x9wmryC9PJWiKs3K-T_eC9pR4o
+eN5PUZZ7arwdMUmzqKPNAtyMqaJCWfD3GZ1KsC8OV5Ze0DRQZPeT3IHg2BUC1NGj2SdjcwaGP_zl
+uytFZWN7kQjnI4brorkO_jzjf7SEPCO7Vy2Z2vikIv7O8bSWZWDGYCcxUoYigFYcjZFirRYr3Yvl
+YZU-F_qh6ZvrVxStSpz6iYDAzPW9v4ZyLSHyWe5H2AN89uRdnvag1769KpjsmGVYbn5jabgCJFs8
+EL7rxymrXri5cKsGH8XC1E0a-kP6vvhdHJhx5eFsFmKJaWh3RCJ8_I5CSzSRsK8JvE1Z6nGFn_SI
+dpeNjf66lbm4y68loUh5Q4BDce3YaCT1gHmluBzXnv1vFzuvJ2jcVyq-nUDjdTqvM9okW8Prmt7l
+ttQ3MVZI4rd-tXJfV4lxaI6wF4LIwiMJmY2tiCHoJ5nbLfHvMG7G5K1NAbizPltQxURPiMPZeCDZ
+15SXI9vdCR-FyQikzp1hUUMMqz231-6BDDTKMOXpicQRQ0CHpEfxY4Rq3mu0QmRi-EIs6JAzfuLi
+ba7fbfHnkhl3GWkj0CVZD8uDbzJceSTHICqVt-3qECUSG3ZfsuebWAEWED_xQoXyAL7kK8fMOPwl
+m6qEk4z7boiJSrcQ2ZIdyPs2bZNvlv4wYg0F3BhFf2HeCYwR3BKXQGlDXGOAD5GuRpHHBch9JfVa
+iUbvCEF23mee633C_K4zCaaVR9UqXMefzqFxSsobMp3heo3eIcQzLhe2SL2xpI9TbsvN2N4c9UMk
+_TnQBHiYBgPxtB_j8bnVu7C__lTTpPKYLpUPxgWEIzljZzbkF37QQ1XtAc2EzcOi2FT4qsjlNgPw
+PbL6ZihWEYZrZUilTSLzzjcQDLzoaF6BL2LOOS-Uju-B7COhcSMc0JLYOob6RDBE9T6HUMuZ
# Properties Generated by AT&T Certificate Manager
# @copyright 2016, AT&T
############################################################
-cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US
+cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
cadi_keyfile=/opt/app/aai-traversal/resources/aaf/org.onap.aai.keyfile
cadi_keystore=/opt/app/aai-traversal/resources/aaf/org.onap.aai.p12
-cadi_keystore_password=enc:383RDJRFA6yQz9AOxUxC1iIg3xTJXityw05MswnpnEtelRQy2D4r5INQjrea7GTV
-#cadi_key_password=enc:<KEY PASSWORD (optional if the same as KEYSTORE PASSWORD)>
+cadi_keystore_password=enc:nF3D1h00vVoLZkCnFtTCJAiH6maEiA3933rI3ctap9Ggjlm2SMg_dxk6ui9iiDwr
+#cadi_key_password=enc:9xs_lJ9QQRDoMcHqLbGg40-gefGrw-sLMjWL40ejbyqdC7Jt_pQfY6ajBLGcbLuL
cadi_alias=aai@aai.onap.org
cadi_truststore=/opt/app/aai-traversal/resources/aaf/truststoreONAPall.jks
-cadi_truststore_password=enc:s77wlnZFoQ08NhnU3OSeWO6uKgRwC6sAK-wTvVubNz2
+cadi_truststore_password=enc:8BxmWFFRI9wcf2jVixnfdK2GPI4veaXofZ65fcYThHv
cadi_loglevel=INFO
cadi_bath_convert=/opt/app/aai-traversal/resources/aaf/bath_config.csv
"visualRange": "1",
"path": "/aai/v14/search/generic-query"
},
+ {
+ "serviceName": "_aai-generic-query",
+ "version": "v15",
+ "url": "/aai/v15/search/generic-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/search/generic-query"
+ },
+ {
+ "serviceName": "_aai-generic-query",
+ "version": "v16",
+ "url": "/aai/v16/search/generic-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/search/generic-query"
+ },
{
"serviceName": "_aai-nodes-query",
"version": "v11",
"visualRange": "1",
"path": "/aai/v14/search/nodes-query"
},
+ {
+ "serviceName": "_aai-nodes-query",
+ "version": "v15",
+ "url": "/aai/v15/search/nodes-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/search/nodes-query"
+ },
+ {
+ "serviceName": "_aai-nodes-query",
+ "version": "v16",
+ "url": "/aai/v16/search/nodes-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/search/nodes-query"
+ },
{
"serviceName": "_aai-query",
"version": "v11",
"visualRange": "1",
"path": "/aai/v14/query"
},
+ {
+ "serviceName": "_aai-query",
+ "version": "v15",
+ "url": "/aai/v15/query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v15/query"
+ },
+ {
+ "serviceName": "_aai-query",
+ "version": "v16",
+ "url": "/aai/v16/query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1",
+ "path": "/aai/v16/query"
+ },
{
"serviceName": "_aai-named-query",
"url": "/aai/search",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-generic-query",
+ "version": "v15",
+ "url": "/aai/v15/search/generic-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-generic-query",
+ "version": "v16",
+ "url": "/aai/v16/search/generic-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-nodes-query",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-nodes-query",
+ "version": "v15",
+ "url": "/aai/v15/search/nodes-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-nodes-query",
+ "version": "v16",
+ "url": "/aai/v16/search/nodes-query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-query",
"version": "v11",
"lb_policy":"ip_hash",
"visualRange": "1"
},
+ {
+ "serviceName": "aai-query",
+ "version": "v15",
+ "url": "/aai/v15/query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "aai-query",
+ "version": "v16",
+ "url": "/aai/v16/query",
+ "protocol": "REST",
+ "port": "8446",
+ "enable_ssl": true,
+ "lb_policy":"ip_hash",
+ "visualRange": "1"
+ },
{
"serviceName": "aai-named-query",
"url": "/aai/search",
--- /dev/null
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
subPath: haproxy.cfg
{{ end }}
name: haproxy-cfg
+ - mountPath: /etc/ssl/private/aai.pem
+ name: aai-pem
+ subPath: aai.pem
ports:
- containerPort: {{ .Values.service.internalPort }}
- containerPort: {{ .Values.service.internalPort2 }}
- name: haproxy-cfg
configMap:
name: aai-deployment-configmap
+ - name: aai-pem
+ secret:
+ secretName: aai-haproxy-secret
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
# application image
loggingRepository: docker.elastic.co
-image: elasticsearch/elasticsearch-oss:6.1.3
+image: elasticsearch/elasticsearch-oss:6.6.2
pullPolicy: Always
# flag to enable debugging - application support required
drop { }
}
- if [http_request_failure] or [@metadata][code] != "200" {
+ if [http_request_failure] or [@metadata][code] != 200 {
mutate {
add_tag => [ "error" ]
}
}
- if "dmaap_source" in [tags] {
+ if "dmaap_source" in [@metadata][request][tags] {
#
# Dmaap provides a json list, whose items are Strings containing the event
# provided to Dmaap, which itself is an escaped json.
source => "[message]"
target => "message"
}
- ruby {
- code => "
- for ev in event.get('message', [])
- ev.set('@metadata', event.get('@metadata'))
- end
- "
- }
-
+
split {
field => "message"
}
}
- if "error" not in [tags] {
+ if "error" not in [@metadata][request][tags]{
#
# Creating data for a secondary index
#
add_tag => [ "event-cl-aggs" ]
}
- if "event-cl-aggs" in [tags] {
+ if "event-cl-aggs" in [@metadata][request][tags]{
#
# we only need a few fields for aggregations; remove all fields from clone except :
# vmName,vnfName,vnfType,requestID,closedLoopAlarmStart, closedLoopControlName,closedLoopAlarmEnd,abated,nbrDmaapevents,finalFailure
--- /dev/null
+#!/bin/bash
+#############################################################################
+# Copyright © 2019 Bell.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#############################################################################
+#
+# This installation is for an RKE install of kubernetes
+# after this run the standard oom install
+# this installation can be run on amy ubuntu 16.04 VM, RHEL 7.6 (root only), physical or cloud azure/aws host
+# https://wiki.onap.org/display/DW/OOM+RKE+Kubernetes+Deployment
+# source from https://jira.onap.org/browse/OOM-1598
+#
+# master/dublin
+# RKE 0.1.16 Kubernetes 1.11.6, kubectl 1.11.6, Helm 2.9.1, Docker 18.06
+# single node install, HA pending
+
+usage() {
+cat <<EOF
+Usage: $0 [PARAMs]
+example
+sudo ./rke_setup.sh -b dublin -s rke.onap.cloud -e onap -l amdocs -v true
+-u : Display usage
+-b [branch] : branch = master or dublin (required)
+-s [server] : server = IP or DNS name (required)
+-e [environment] : use the default (onap)
+-k [key] : ssh key name
+-l [username] : login username account (use ubuntu for example)
+EOF
+}
+
+install_onap() {
+ #constants
+ PORT=8880
+ if [ "$BRANCH" == "casablanca" ]; then
+ KUBERNETES_VERSION=
+ RKE_VERSION=0.1.15
+ KUBECTL_VERSION=1.11.3
+ HELM_VERSION=2.9.1
+ DOCKER_VERSION=17.03
+ else
+ KUBERNETES_VERSION=
+ RKE_VERSION=0.1.16
+ KUBECTL_VERSION=1.11.6
+ HELM_VERSION=2.9.1
+ DOCKER_VERSION=18.06
+ fi
+
+ # copy your private ssh key and cluster.yml file to the vm
+ # on your dev machine
+ #sudo cp ~/.ssh/onap_rsa .
+ #sudo chmod 777 onap_rsa
+ #scp onap_rsa ubuntu@192.168.241.132:~/
+ # on this vm
+ #sudo chmod 400 onap_rsa
+ #sudo cp onap_rsa ~/.ssh
+ # make sure public key is insetup correctly in
+ # sudo vi ~/.ssh/authorized_keys
+
+ echo "please supply your ssh key as provided by the -k keyname - it must be be chmod 400 and chown user:user in ~/.ssh/"
+ echo "The RKE version specific cluster.yaml is already integrated in this script for 0.1.15/0.1.16 no need for below generation..."
+ echo "rke config --name cluster.yml"
+ echo "specifically"
+ echo "address: $SERVER"
+ echo "user: $USERNAME"
+ echo "ssh_key_path: $SSHPATH_PREFIX/$SSHKEY"
+
+ RKETOOLS=
+ HYPERCUBE=
+ POD_INFRA_CONTAINER=
+ if [ "$RKE_VERSION" == "0.1.16" ]; then
+ RKETOOLS=0.1.15
+ HYPERCUBE=1.11.6-rancher1
+ POD_INFRA_CONTAINER=rancher/pause-amd64:3.1
+ else
+ # 0.1.15
+ RKETOOLS=0.1.14
+ HYPERCUBE=1.11.3-rancher1
+ POD_INFRA_CONTAINER=gcr.io.google_containers/pause-amd64:3.1
+ fi
+
+ cat > cluster.yml <<EOF
+# generated from rke_setup.sh
+nodes:
+- address: $SERVER
+ port: "22"
+ internal_address: ""
+ role:
+ - controlplane
+ - worker
+ - etcd
+ hostname_override: ""
+ user: $USERNAME
+ docker_socket: /var/run/docker.sock
+ ssh_key: ""
+ ssh_key_path: $SSHPATH_PREFIX/$SSHKEY
+ labels: {}
+services:
+ etcd:
+ image: ""
+ extra_args: {}
+ extra_binds: []
+ extra_env: []
+ external_urls: []
+ ca_cert: ""
+ cert: ""
+ key: ""
+ path: ""
+ snapshot: null
+ retention: ""
+ creation: ""
+ kube-api:
+ image: ""
+ extra_args: {}
+ extra_binds: []
+ extra_env: []
+ service_cluster_ip_range: 10.43.0.0/16
+ service_node_port_range: ""
+ pod_security_policy: false
+ kube-controller:
+ image: ""
+ extra_args: {}
+ extra_binds: []
+ extra_env: []
+ cluster_cidr: 10.42.0.0/16
+ service_cluster_ip_range: 10.43.0.0/16
+ scheduler:
+ image: ""
+ extra_args: {}
+ extra_binds: []
+ extra_env: []
+ kubelet:
+ image: ""
+ extra_args:
+ max-pods: 900
+ extra_binds: []
+ extra_env: []
+ cluster_domain: cluster.local
+ infra_container_image: ""
+ cluster_dns_server: 10.43.0.10
+ fail_swap_on: false
+ kubeproxy:
+ image: ""
+ extra_args: {}
+ extra_binds: []
+ extra_env: []
+network:
+ plugin: canal
+ options: {}
+authentication:
+ strategy: x509
+ options: {}
+ sans: []
+system_images:
+ etcd: rancher/coreos-etcd:v3.2.18
+ alpine: rancher/rke-tools:v$RKETOOLS
+ nginx_proxy: rancher/rke-tools:v$RKETOOLS
+ cert_downloader: rancher/rke-tools:v$RKETOOLS
+ kubernetes_services_sidecar: rancher/rke-tools:v$RKETOOLS
+ kubedns: rancher/k8s-dns-kube-dns-amd64:1.14.10
+ dnsmasq: rancher/k8s-dns-dnsmasq-nanny-amd64:1.14.10
+ kubedns_sidecar: rancher/k8s-dns-sidecar-amd64:1.14.10
+ kubedns_autoscaler: rancher/cluster-proportional-autoscaler-amd64:1.0.0
+ kubernetes: rancher/hyperkube:v$HYPERCUBE
+ flannel: rancher/coreos-flannel:v0.10.0
+ flannel_cni: rancher/coreos-flannel-cni:v0.3.0
+ calico_node: rancher/calico-node:v3.1.3
+ calico_cni: rancher/calico-cni:v3.1.3
+ calico_controllers: ""
+ calico_ctl: rancher/calico-ctl:v2.0.0
+ canal_node: rancher/calico-node:v3.1.3
+ canal_cni: rancher/calico-cni:v3.1.3
+ canal_flannel: rancher/coreos-flannel:v0.10.0
+ wave_node: weaveworks/weave-kube:2.1.2
+ weave_cni: weaveworks/weave-npc:2.1.2
+ pod_infra_container: $POD_INFRA_CONTAINER
+ ingress: rancher/nginx-ingress-controller:0.16.2-rancher1
+ ingress_backend: rancher/nginx-ingress-controller-defaultbackend:1.4
+ metrics_server: rancher/metrics-server-amd64:v0.2.1
+ssh_key_path: $SSHPATH
+ssh_agent_auth: false
+authorization:
+ mode: rbac
+ options: {}
+ignore_docker_version: false
+kubernetes_version: "$KUBERNETES_VERSION"
+private_registries: []
+ingress:
+ provider: ""
+ options: {}
+ node_selector: {}
+ extra_args: {}
+cluster_name: ""
+cloud_provider:
+ name: ""
+prefix_path: ""
+addon_job_timeout: 0
+bastion_host:
+ address: ""
+ port: ""
+ user: ""
+ ssh_key: ""
+ ssh_key_path: ""
+monitoring:
+ provider: ""
+ options: {}
+EOF
+
+
+
+ echo "Installing on ${SERVER} for ${BRANCH}: RKE: ${RKE_VERSION} Kubectl: ${KUBECTL_VERSION} Helm: ${HELM_VERSION} Docker: ${DOCKER_VERSION} username: ${USERNAME}"
+ sudo echo "127.0.0.1 ${SERVER}" >> /etc/hosts
+ echo "Install docker - If you must install as non-root - comment out the docker install below - run it separately, run the user mod, logout/login and continue this script"
+ curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
+ sudo usermod -aG docker $USERNAME
+
+ echo "Install RKE"
+ sudo wget https://github.com/rancher/rke/releases/download/v$RKE_VERSION/rke_linux-amd64
+ mv rke_linux-amd64 rke
+ sudo chmod +x rke
+ sudo mv ./rke /usr/local/bin/rke
+
+ echo "Install make - required for beijing+ - installed via yum groupinstall Development Tools in RHEL"
+ # ubuntu specific
+ sudo apt-get install make -y
+
+ sudo curl -LO https://storage.googleapis.com/kubernetes-release/release/v$KUBECTL_VERSION/bin/linux/amd64/kubectl
+ sudo chmod +x ./kubectl
+ sudo mv ./kubectl /usr/local/bin/kubectl
+ sudo mkdir ~/.kube
+ wget http://storage.googleapis.com/kubernetes-helm/helm-v${HELM_VERSION}-linux-amd64.tar.gz
+ sudo tar -zxvf helm-v${HELM_VERSION}-linux-amd64.tar.gz
+ sudo mv linux-amd64/helm /usr/local/bin/helm
+
+ echo "Bringing RKE up - using supplied cluster.yml"
+ sudo rke up
+ echo "wait 2 extra min for the cluster"
+ sleep 60
+ echo "1 more min"
+ sleep 60
+ echo "copy kube_config_cluter.yaml generated - to ~/.kube/config"
+ sudo cp kube_config_cluster.yml ~/.kube/config
+ # avoid using sudo for kubectl
+ sudo chmod 777 ~/.kube/config
+ echo "Verify all pods up on the kubernetes system - will return localhost:8080 until a host is added"
+ echo "kubectl get pods --all-namespaces"
+ kubectl get pods --all-namespaces
+ echo "install tiller/helm"
+ kubectl -n kube-system create serviceaccount tiller
+ kubectl create clusterrolebinding tiller --clusterrole=cluster-admin --serviceaccount=kube-system:tiller
+ helm init --service-account tiller
+ kubectl -n kube-system rollout status deploy/tiller-deploy
+ echo "upgrade server side of helm in kubernetes"
+ if [ "$USERNAME" == "root" ]; then
+ helm version
+ else
+ sudo helm version
+ fi
+ echo "sleep 30"
+ sleep 30
+ if [ "$USERNAME" == "root" ]; then
+ helm init --upgrade
+ else
+ sudo helm init --upgrade
+ fi
+ echo "sleep 30"
+ sleep 30
+ echo "verify both versions are the same below"
+ if [ "$USERNAME" == "root" ]; then
+ helm version
+ else
+ sudo helm version
+ fi
+ echo "start helm server"
+ if [ "$USERNAME" == "root" ]; then
+ helm serve &
+ else
+ sudo helm serve &
+ fi
+ echo "sleep 30"
+ sleep 30
+ echo "add local helm repo"
+ if [ "$USERNAME" == "root" ]; then
+ helm repo add local http://127.0.0.1:8879
+ helm repo list
+ else
+ sudo helm repo add local http://127.0.0.1:8879
+ sudo helm repo list
+ fi
+ echo "To enable grafana dashboard - do this after running cd.sh which brings up onap - or you may get a 302xx port conflict"
+ echo "kubectl expose -n kube-system deployment monitoring-grafana --type=LoadBalancer --name monitoring-grafana-client"
+ echo "to get the nodeport for a specific VM running grafana"
+ echo "kubectl get services --all-namespaces | grep graf"
+ sudo docker version
+ helm version
+ kubectl version
+ kubectl get services --all-namespaces
+ kubectl get pods --all-namespaces
+ echo "finished!"
+}
+
+BRANCH=
+SERVER=
+ENVIRON=
+VALIDATE=false
+USERNAME=ubuntu
+SSHPATH_PREFIX=~/.ssh
+
+while getopts ":b:s:e:u:l:k:v" PARAM; do
+ case $PARAM in
+ u)
+ usage
+ exit 1
+ ;;
+ b)
+ BRANCH=${OPTARG}
+ ;;
+ e)
+ ENVIRON=${OPTARG}
+ ;;
+ s)
+ SERVER=${OPTARG}
+ ;;
+ l)
+ USERNAME=${OPTARG}
+ ;;
+ k)
+ SSHKEY=${OPTARG}
+ ;;
+ v)
+ VALIDATE=${OPTARG}
+ ;;
+ ?)
+ usage
+ exit
+ ;;
+ esac
+done
+
+if [[ -z $BRANCH ]]; then
+ usage
+ exit 1
+fi
+
+install_onap $BRANCH $SERVER $ENVIRON $USERNAME $SSHPATH_PREFIX $SSHKEY $VALIDATE
{
"namespace" : "{{ if .Values.dcae_ns }}{{ .Values.dcae_ns}}{{ else }}{{include "common.namespace" . }}{{ end}}",
"consul_dns_name" : "{{ .Values.config.address.consul.host }}.{{ include "common.namespace" . }}",
+ "default_k8s_location" : "{{ .Values.default_k8s_location }}",
"image_pull_secrets" : ["{{ include "common.namespace" . }}-docker-registry-key"],
"filebeat":
{
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.9
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.10-STAGING-latest
+default_k8s_location: central
# DCAE component images to be deployed via Cloudify Manager
# Use to override default setting in blueprints
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.cm-container:1.5.1
+image: onap/org.onap.dcaegen2.deployments.cm-container:1.5.2-STAGING-latest
pullPolicy: Always
# probe configuration parameters
ports:
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.externalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ nodePort: {{ .Values.global.nodePortPrefixExt| default .Values.nodePortPrefixExt }}{{ .Values.service.nodePort }}
name: {{ .Values.service.name }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
#################################################################
global:
nodePortPrefix: 302
+ nodePortPrefixExt: 304
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
path: /healthcheck
service:
- type: ClusterIP
+ type: NodePort
name: config-binding-service
externalPort: 10000
internalPort: 10000
+ nodePort: 15
# Resource Limit flavor -By Default using small
flavor: small
tlsRepository: nexus3.onap.org:10001
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.1-STAGING-latest
consulLoaderRepository: nexus3.onap.org:10001
- consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0
+ consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0-STAGING-latest
repositoryCred:
user: docker
password: docker
periodSeconds: 10
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.4
+image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.4-STAGING-latest
# Resource Limit flavor -By Default using small
flavor: small
tlsRepository: nexus3.onap.org:10001
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.1-STAGING-latest
consulLoaderRepository: nexus3.onap.org:10001
- consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0
+ consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0-STAGING-latest
repositoryCred:
user: docker
password: docker
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.platform.policy-handler:4.6.0
+image: onap/org.onap.dcaegen2.platform.policy-handler:4.6.0-STAGING-latest
pullPolicy: Always
# probe configuration parameters
--- /dev/null
+cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
+cadi_keyfile=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.keyfile
+cadi_keystore=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks
+cadi_keystore_password=]3V)($O&.Mv]W{f8^]6SxGNL
+cadi_key_password=]3V)($O&.Mv]W{f8^]6SxGNL
+cadi_alias=dmaap-dr-node@dmaap-dr.onap.org
+cadi_truststore=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks
+cadi_truststore_password=(Rd,&{]%ePdp}4JZjqoJ2G+g
+
+aaf_env=DEV
+aaf_locate_url=https://aaf-onap-test.osaaf.org:8095
+aaf_oauth2_introspect_url=https://AAF_LOCATE_URL/AAF_NS.introspect:2.1/introspect
+aaf_oauth2_token_url=https://AAF_LOCATE_URL/AAF_NS.token:2.1/token
+aaf_url=https://AAF_LOCATE_URL/AAF_NS.service:2.1
+cadi_protocols=TLSv1.1,TLSv1.2
+cm_url=https://AAF_LOCATE_URL/AAF_NS.cm:2.1
+fs_url=https://AAF_LOCATE_URL/AAF_NS.fs.2.1
+gui_url=https://AAF_LOCATE_URL/AAF_NS.gui.2.1
+
+cadi_latitude=53.423
+cadi_longitude=7.940
+
+cadi_loglevel=INFO
\ No newline at end of file
# The key used to generate passwords for node to node transfers
#
NodeAuthKey=Node123!
+#
+# DR_NODE DEFAULT ENABLED TLS PROTOCOLS
+NodeHttpsProtocols = TLSv1.1|TLSv1.2
+#
+# AAF type to generate permission string
+AAFType = org.onap.dmaap-dr.feed
+#
+# AAF default instance to generate permission string - default should be legacy
+AAFInstance = legacy
+#
+# AAF action to generate permission string - default should be publish
+AAFAction = publish
+#
+# AAF URL to connect to AAF server
+AafUrl = https://aaf-onap-test.osaaf.org:8095
+#
+# AAF CADI enabled flag
+CadiEnabled = false
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}-node-props-configmap
+ name: {{ include "common.fullname" . }}-configmap
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
data:
-{{ tpl (.Files.Glob "resources/config/node.properties").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
---
apiVersion: v1
kind: ConfigMap
name: localtime
readOnly: false
- mountPath: /opt/app/datartr/etc/dedicatedFeed.json
+ name: {{ include "common.fullname" . }}-create-feed-config
subPath: dedicatedFeed.json
- name: create-feed
- mountPath: /opt/app/datartr/etc/createFeed.sh
+ name: {{ include "common.fullname" . }}-create-feed-config
subPath: createFeed.sh
- name: create-feed
- mountPath: /opt/app/datartr/etc/node.properties
+ name: {{ include "common.fullname" . }}-config
subPath: node.properties
- name: node-props
+ - mountPath: /opt/app/datartr/etc/drNodeCadi.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: drNodeCadi.properties
lifecycle:
postStart:
exec:
- name: localtime
hostPath:
path: /etc/localtime
- - name: create-feed
+ - name: {{ include "common.fullname" . }}-create-feed-config
configMap:
name: {{ include "common.fullname" . }}-create-feed-configmap
defaultMode: 0755
- - name: node-props
+ items:
+ - key: createFeed.sh
+ path: createFeed.sh
+ - key: dedicatedFeed.json
+ path: dedicatedFeed.json
+ - name: {{ include "common.fullname" . }}-config
configMap:
- name: {{ include "common.fullname" . }}-node-props-configmap
+ name: {{ include "common.fullname" . }}-configmap
+ items:
+ - key: node.properties
+ path: node.properties
+ - key: drNodeCadi.properties
+ path: drNodeCadi.properties
- name: {{ include "common.fullname" . }}-log-conf
configMap:
name: {{ include "common.fullname" . }}-log
--- /dev/null
+cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
+cadi_keyfile=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.keyfile
+cadi_keystore=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks
+cadi_keystore_password=AT{];bvaDiytVD&oWhMZj0N5
+cadi_key_password=AT{];bvaDiytVD&oWhMZj0N5
+cadi_alias=dmaap-dr-prov@dmaap-dr.onap.org
+cadi_truststore=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks
+cadi_truststore_password=ljlS@Y}0]{UO(TnwvEWkgJ%]
+
+aaf_env=DEV
+aaf_locate_url=https://aaf-onap-test.osaaf.org:8095
+aaf_oauth2_introspect_url=https://AAF_LOCATE_URL/AAF_NS.introspect:2.1/introspect
+aaf_oauth2_token_url=https://AAF_LOCATE_URL/AAF_NS.token:2.1/token
+aaf_url=https://AAF_LOCATE_URL/AAF_NS.service:2.1
+cadi_protocols=TLSv1.1,TLSv1.2
+cm_url=https://AAF_LOCATE_URL/AAF_NS.cm:2.1
+fs_url=https://AAF_LOCATE_URL/AAF_NS.fs.2.1
+gui_url=https://AAF_LOCATE_URL/AAF_NS.gui.2.1
+
+cadi_latitude=53.423
+cadi_longitude=7.940
+
+cadi_loglevel=INFO
\ No newline at end of file
org.onap.dmaap.datarouter.db.url = jdbc:mariadb://{{.Values.config.dmaapDrDb.mariadbServiceName}}:{{.Values.config.dmaapDrDb.mariadbServicePort}}/datarouter
org.onap.dmaap.datarouter.db.login = datarouter
org.onap.dmaap.datarouter.db.password = datarouter
+
+# PROV - DEFAULT ENABLED TLS PROTOCOLS
+org.onap.dmaap.datarouter.provserver.https.include.protocols = TLSv1.1|TLSv1.2
+
+# AAF config
+org.onap.dmaap.datarouter.provserver.cadi.enabled = false
+
+org.onap.dmaap.datarouter.provserver.passwordencryption = PasswordEncryptionKey#@$%^&1234#
+org.onap.dmaap.datarouter.provserver.aaf.feed.type = org.onap.dmaap-dr.feed
+org.onap.dmaap.datarouter.provserver.aaf.sub.type = org.onap.dmaap-dr.sub
+org.onap.dmaap.datarouter.provserver.aaf.instance = legacy
+org.onap.dmaap.datarouter.provserver.aaf.action.publish = publish
+org.onap.dmaap.datarouter.provserver.aaf.action.subscribe = subscribe
+
+# AAF URL to connect to AAF server
+org.onap.dmaap.datarouter.provserver.cadi.aaf.url = https://aaf-onap-test.osaaf.org:8095
+
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}-prov-props-configmap
+ name: {{ include "common.fullname" . }}-configmap
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
data:
-{{ tpl (.Files.Glob "resources/config/provserver.properties").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
---
apiVersion: v1
kind: ConfigMap
name: localtime
readOnly: false
- mountPath: /opt/app/datartr/etc/provserver.properties
+ name: {{ include "common.fullname" . }}-config
subPath: provserver.properties
- name: prov-props
- - name: {{ include "common.fullname" . }}-logs
- mountPath: {{ .Values.global.loggingDirectory }}
+ - mountPath: /opt/app/datartr/etc/drProvCadi.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: drProvCadi.properties
+ - mountPath: {{ .Values.global.loggingDirectory }}
+ name: {{ include "common.fullname" . }}-logs
resources:
{{ include "common.resources" . | indent 12 }}
{{- if .Values.nodeSelector }}
- name: localtime
hostPath:
path: /etc/localtime
- - name: prov-props
+ - name: {{ include "common.fullname" . }}-config
configMap:
- name: {{ include "common.fullname" . }}-prov-props-configmap
+ name: {{ include "common.fullname" . }}-configmap
+ items:
+ - key: provserver.properties
+ path: provserver.properties
+ - key: drProvCadi.properties
+ path: drProvCadi.properties
- name: {{ include "common.fullname" . }}-log-conf
configMap:
name: {{ include "common.fullname" . }}-log
--- /dev/null
+{{/*
+# Copyright © 2019 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- /*
+ Calculate the maximum number of zk server down in order to guarantee ZK quorum.
+ For guaranteeing ZK quorum we need half of the server + 1 up.
+
+ div in go template cast return an int64
+ so we need to know if it is an even number or an odd.
+ For this we are doing (n/2)*2=n?
+ if true it is even else it is even
+*/ -}}
+{{- define "zk.maxUnavailable" -}}
+{{- $halfReplica := div .Values.replicaCount 2 -}}
+ {{/* divide by 2 and multiply by 2 in order to know if it is an even number*/}}
+ {{if eq (mul $halfReplica 2) (int .Values.replicaCount) }}
+ {{- toYaml (sub $halfReplica 1) -}}
+ {{else}}
+ {{- toYaml $halfReplica -}}
+ {{end}}
+{{- end -}}
selector:
matchLabels:
app: {{ include "common.name" . }}
- maxUnavailable: {{ div (sub .Values.replicaCount 1) 2 }}
+ maxUnavailable: {{ include "zk.maxUnavailable" . }}
"txenabled": false,
"clients": [{
"dcaeLocationName": "san-francisco",
- "clientIdentity" "dcae@dcae.onap.org",
+ "clientIdentity": "dcae@dcae.onap.org",
"action": [
"pub",
"view"
- name: dmaap-bc
version: ~4.x-0
repository: 'file://components/dmaap-bc'
- condition: dmaap-bus-controller.enabled
+ condition: dmaap-bc.enabled
- name: dmaap-dr-node
version: ~4.x-0
repository: 'file://components/dmaap-dr-node'
# probe configuration parameters
liveness:
httpGet:
- path: /nbi/api/v3/status
+ path: /nbi/api/v4/status
port: 8080
initialDelaySeconds: 180
periodSeconds: 30
readiness:
httpGet:
- path: /nbi/api/v3/status
+ path: /nbi/api/v4/status
port: 8080
initialDelaySeconds: 185
periodSeconds: 30
--- /dev/null
+# Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Chart for Change Management Service Orchestrator (CMSO) Optimizer
+name: oof-cmso-optimizer
+version: 4.0.0
--- /dev/null
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a
+# copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
+# or implied. See the License for the specific language governing
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+#
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
--- /dev/null
+###
+# Copyright (c) 2019 AT&T Intellectual Property.
+# Modifications Copyright (c) 2018 IBM.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the ââ?¬Å"Licenseââ?¬);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# https://creativecommons.org/licenses/by/4.0/
+#
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###
+spring.datasource.jdbcUrl=jdbc:mariadb://${DB_HOST}:${DB_PORT}/${DB_SCHEMA}?createDatabaseIfNotExist=true
+spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
+spring.datasource.username=${DB_USERNAME}
+spring.datasource.password=${DB_PASSWORD}
+
+spring.datasource.initialize=false
+spring.datasource.tomcat.max-wait=10000
+spring.datasource.tomcat.initialSize=5
+spring.datasource.tomcat.max-active=25
+spring.datasource.tomcat.test-on-borrow=true
+
+
+changeLogFile=optimizer-liquibase-changeLog.xml
--- /dev/null
+<?xml version = "1.0" encoding = "UTF-8" ?>
+<!--
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<included>
+ <jmxConfigurator />
+ <!-- Example evaluator filter applied against console appender -->
+<property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="defaultPattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+ <property name="debugPattern" value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n"/>
+
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="ERROR"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <file>${logDirectory}/error2.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/cmso/error.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+
+ <appender name="DEBUG"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/debug.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/cmso/debug.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ </appender>
+
+
+ <appender name="AUDIT"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/audit.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/audit.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFAudit"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="AUDIT" />
+ </appender>
+
+ <appender name="METRIC"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/metric.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+ %msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/metric.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFMetrics"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="METRIC" />
+ </appender>
+
+ <!-- SECURITY related loggers -->
+ <appender name="SECURITY"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/security.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/security.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFSecurity"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="SECURITY" />
+ </appender>
+ <!-- AAF related loggers -->
+ <logger name="org.onap.aaf" level="INFO" additivity="true">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <logger name="org.apache.catalina.core" level="INFO"
+ additivity="true">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <logger name="org.onap.cmso" level="INFO"
+ additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger name="com.att.eelf.error" level="OFF" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+ <!-- EELF related loggers -->
+ <logger name="com.att.eelf.audit" level="INFO"
+ additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger name="com.att.eelf.security" level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="DEBUG" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="org.apache" level="DEBUG" />
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="INFO" />
+ <logger name="ch.qos.logback.core" level="INFO" />
+
+ <!-- logback jms appenders & loggers definition starts here -->
+ <appender name="auditLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <appender name="perfLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <logger name="AuditRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="AuditRecord_DirectCall" level="INFO"
+ additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="PerfTrackerRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="perfLogs" />
+ </logger>
+ <!-- logback jms appenders & loggers definition ends here -->
+
+ <root level="DEBUG">
+ <appender-ref ref="DEBUG" />
+ <appender-ref ref="STDOUT" />
+ </root>
+</included>
+
--- /dev/null
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a
+# copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
+# or implied. See the License for the specific language governing
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+#
+#-------------------------------------------------------------------------------
+spring.datasource.url=jdbc:mariadb://${DB_HOST}:${DB_PORT}/${DB_SCHEMA}
+spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
+spring.datasource.username=${DB_USERNAME}
+spring.datasource.password=${DB_PASSWORD}
+cmso.database.password=${DB_PASSWORD}
+
+spring.datasource.initialize=false
+spring.datasource.tomcat.max-wait=10000
+spring.datasource.tomcat.initialSize=5
+spring.datasource.tomcat.max-active=25
+spring.datasource.tomcat.test-on-borrow=true
+
+spring.jpa.show-sql=false
+spring.jpa.hibernate.ddl-auto=none
+spring.jpa.hibernate.naming.strategy=org.hibernate.cfg.EJB3NamingStrategy
+spring.jpa.database-platform=org.hibernate.dialect.MySQL5InnoDBDialect
+spring.jpa.hibernate.naming.physical-strategy=org.hibernate.boot.model.naming.PhysicalNamingStrategyStandardImpl
+spring.jpa.hibernate.id.new_generator_mappings=false
+hibernate.id.new_generator_mappings=false
+
+logging.level.org.hibernate.SQL=WARN
+logging.level.org.hibernate=WARN
+#-------------------------------------------------------------------------------
+
+
+cmso.topology.create.request.url=http://${TOPOLOGY_HOST}:${TOPOLOGY_PORT}/topology/v1/current
+cmso.ticket.create.request.url=http://${TICKETMGT_HOST}:${TICKETMGT_PORT}/ticketmgt/v1/activetickets
+cmso.local.policy.folder=data/policies
+
+cmso.minizinc.command.exe=/mz-dist/bin/minizinc
+cmso.minizinc.command.solver=OSICBC
+cmso.minizinc.command.timelimit=60000
+cmso.minizinc.command.mzn=scripts/minizinc/generic_attributes.mzn
+
+mechid.user=oof@oof.onap.org
+mechid.pass=changeit
--- /dev/null
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ .Values.mariadb.nameOverride }}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ - name: db-init
+ image: "{{ include "common.repository" . }}/{{ .Values.dbinit.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ env:
+ - name: DB_HOST
+ value: {{ .Values.config.db_host }}.{{.Release.Namespace}}
+ - name: DB_PORT
+ value: {{ .Values.config.db_port | quote}}
+ - name: DB_USERNAME
+ value: {{ .Values.config.db_root }}
+ - name: DB_SCHEMA
+ value: {{ .Values.config.mysqlDatabase }}
+ - name: DB_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ .Release.Name}}-cmso-db
+ key: db-root-password
+ terminationMessagePolicy: File
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-config
+ mountPath: /share/etc/config
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /share/logs
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ env:
+ - name: TOPOLOGY_HOST
+ value: {{ .Values.config.topology_host }}.{{.Release.Namespace}}
+ - name: TOPOLOGY_PORT
+ value: {{ .Values.config.topology_port | quote}}
+ - name: TICKETMGT_HOST
+ value: {{ .Values.config.ticketmgt_host }}.{{.Release.Namespace}}
+ - name: TICKETMGT_PORT
+ value: {{ .Values.config.ticketmgt_port | quote}}
+ - name: DB_HOST
+ value: {{ .Values.config.db_host }}.{{.Release.Namespace}}
+ - name: DB_PORT
+ value: {{ .Values.config.db_port | quote}}
+ - name: DB_USERNAME
+ value: {{ .Values.config.db_root }}
+ - name: DB_SCHEMA
+ value: {{ .Values.config.mysqlDatabase }}
+ - name: DB_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ .Release.Name}}-cmso-db
+ key: db-root-password
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /share/logs
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /share/debug-logs
+ - name: {{ include "common.fullname" . }}-config
+ mountPath: /share/etc/config
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: logback.xml
+ path: logback.xml
+ - key: cadi.properties
+ path: cadi.properties
+ - key: optimizer.properties
+ path: optimizer.properties
+ - key: liquibase.properties
+ path: liquibase.properties
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+
+subChartsOnly:
+ enabled: true
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/optf-cmso-optimizer:latest
+pullPolicy: Always
+
+#init container image
+dbinit:
+ image: onap/optf-cmso-dbinit:latest
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+
+service:
+ type: ClusterIP
+ name: oof-cmso-optimizer
+ portName: cmso
+ internalPort: 7997
+ externalPort: 7997
+ #nodePort: 23
+ # as of 20181022 port 23 is reserved for cmso
+ # see https://wiki.onap.org/display/DW/OOM+NodePort+List
+
+
+config:
+ db_root: root
+ db_user: cmso-admin
+ mysqlDatabase: optimizer
+ db_host: oof-cmso-dbhost
+ db_port: 3306
+ topology_host: oof-cmso-topology
+ topology_port: 7998
+ ticketmgt_host: oof-cmso-ticketmgt
+ ticketmgt_port: 7999
+
+mariadb:
+ nameOverride: cmso-db
+
+ingress:
+ enabled: false
+
+#resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ unlimited: {}
--- /dev/null
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a
+# copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
+# or implied. See the License for the specific language governing
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+#
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
#-------------------------------------------------------------------------------
-# Copyright © 2017-2018 AT&T Intellectual Property.
-# Modifications Copyright © 2018 IBM.
+# Copyright (c) 2017-2018 AT&T Intellectual Property.
+# Modifications Copyright (c) 2018 IBM.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#
#
# Unless otherwise specified, all documentation contained herein is licensed
-# under the Creative Commons License, Attribution 4.0 Intl. (the â??Licenseâ?\9d);
+# under the Creative Commons License, Attribution 4.0 Intl. (the ???License???);
# you may not use this documentation except in compliance with the License.
# You may obtain a copy of the License at
#
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
-###
-### MySQL DB.
+#-------------------------------------------------------------------------------
spring.datasource.url=jdbc:mariadb://${DB_HOST}:${DB_PORT}/${DB_SCHEMA}
spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
spring.datasource.username=${DB_USERNAME}
spring.datasource.tomcat.max-active=25
spring.datasource.tomcat.test-on-borrow=true
-spring.jpa.show-sql=true
+spring.jpa.show-sql=false
spring.jpa.hibernate.ddl-auto=none
spring.jpa.hibernate.naming.strategy=org.hibernate.cfg.EJB3NamingStrategy
spring.jpa.database-platform=org.hibernate.dialect.MySQL5InnoDBDialect
spring.jpa.hibernate.id.new_generator_mappings=false
hibernate.id.new_generator_mappings=false
-logging.level.org.hibernate.SQL=TRACE
-
-logging.level.org.hibernate=TRACE
+logging.level.org.hibernate.SQL=WARN
+logging.level.org.hibernate=WARN
+#-------------------------------------------------------------------------------
#
cmso.aaf.enabled=false
## loopback settings
so.url=http://localhost:8080/cmso/v1/loopbacktest/onap/so/infra/orchestrationRequests/v7
-so.user=cmso@onap.org
-so.pass=enc:bfodXf8qRfCqMvlxVBYNWQ==
+so.user=oof@oof.onap.org
+so.pass=changeit
-mechid.user=cmso@onap.org
-mechid.pass=enc:bfodXf8qRfCqMvlxVBYNWQ==
+mechid.user=oof@oof.onap.org
+mechid.pass=changeit
cmso.dispatch.url=http://localhost:8089
#-------------------------------------------------------------------------------
-# Copyright © 2017-2018 AT&T Intellectual Property.
-# Modifications Copyright © 2018 IBM.
+# Copyright (c) 2017-2018 AT&T Intellectual Property.
+# Modifications Copyright ? 2018 IBM.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#
#
# Unless otherwise specified, all documentation contained herein is licensed
-# under the Creative Commons License, Attribution 4.0 Intl. (the â??Licenseâ?\9d);
+# under the Creative Commons License, Attribution 4.0 Intl. (the ???License???);
# you may not use this documentation except in compliance with the License.
# You may obtain a copy of the License at
#
# limitations under the License.
#-------------------------------------------------------------------------------
-cmso.optimizer.url=http://localhost:8080/cmso/v1/loopbacktest/optimizer
-cmso.optimizer.callbackurl=http://localhost:8080/cmso/v1/optimizerCallback
-
+cmso.optimizer.request.url=$http://${OPTIMIZER_HOST}:${OPTIMIZER_PORT}/optimizer/v1/optimize/schedule
+cmso.optimizer.status.url=http://${OPTIMIZER_HOST}:${OPTIMIZER_PORT}/optimizer/v1/optimize/schedule
+cmso.optimizer.health.url=http://${OPTIMIZER_HOST}:${OPTIMIZER_PORT}/optimizer/v1/health?checkInterfaces=true
\ No newline at end of file
-# Copyright © 2018 AT&T
+# Copyright (c) 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
secretKeyRef:
name: {{ .Release.Name}}-cmso-db
key: user-password
+ - name: OPTIMIZER_HOST
+ value: {{ .Values.config.optimizer_host }}.{{.Release.Namespace}}
+ - name: OPTIMIZER_PORT
+ value: {{ .Values.config.optimizer_port | quote}}
ports:
- containerPort: {{ .Values.service.internalPort }}
# disable liveness probe when breakpoints set in debugger
path: logback.xml
- key: cmso.properties
path: cmso.properties
+ - key: cadi.properties
+ path: cadi.properties
- key: optimizer.properties
path: optimizer.properties
- key: ticketmgt.properties
-# Copyright © 2018 AT&T
+# Copyright © 2018-2019 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# application image
repository: nexus3.onap.org:10001
-image: onap/optf-cmso-service:1.0.1
+image: onap/optf-cmso-service:latest
pullPolicy: Always
#init container image
dbinit:
- image: onap/optf-cmso-dbinit:1.0.1
+ image: onap/optf-cmso-dbinit:latest
# flag to enable debugging - application support required
debugEnabled: false
mysqlDatabase: cmso
db_host: oof-cmso-dbhost
db_port: 3306
+ optimizer_host: oof-cmso-optimizer
+ optimizer_port: 7997
mariadb:
nameOverride: cmso-db
--- /dev/null
+# Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Chart for Change Management Service Orchestrator (CMSO) Ticket Management
+name: oof-cmso-ticketmgt
+version: 4.0.0
--- /dev/null
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a
+# copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
+# or implied. See the License for the specific language governing
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+#
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
--- /dev/null
+<?xml version = "1.0" encoding = "UTF-8" ?>
+<!--
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<included>
+ <jmxConfigurator />
+ <!-- Example evaluator filter applied against console appender -->
+<property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="defaultPattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+ <property name="debugPattern" value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n"/>
+
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="ERROR"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <file>${logDirectory}/error2.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/cmso/error.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+
+ <appender name="DEBUG"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/debug.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/cmso/debug.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ </appender>
+
+
+ <appender name="AUDIT"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/audit.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/audit.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFAudit"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="AUDIT" />
+ </appender>
+
+ <appender name="METRIC"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/metric.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+ %msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/metric.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFMetrics"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="METRIC" />
+ </appender>
+
+ <!-- SECURITY related loggers -->
+ <appender name="SECURITY"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/security.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/security.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFSecurity"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="SECURITY" />
+ </appender>
+ <!-- AAF related loggers -->
+ <logger name="org.onap.aaf" level="INFO" additivity="true">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <logger name="org.apache.catalina.core" level="INFO"
+ additivity="true">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <logger name="org.onap.cmso" level="INFO"
+ additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger name="com.att.eelf.error" level="OFF" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+ <!-- EELF related loggers -->
+ <logger name="com.att.eelf.audit" level="INFO"
+ additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger name="com.att.eelf.security" level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="DEBUG" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="org.apache" level="DEBUG" />
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="INFO" />
+ <logger name="ch.qos.logback.core" level="INFO" />
+
+ <!-- logback jms appenders & loggers definition starts here -->
+ <appender name="auditLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <appender name="perfLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <logger name="AuditRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="AuditRecord_DirectCall" level="INFO"
+ additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="PerfTrackerRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="perfLogs" />
+ </logger>
+ <!-- logback jms appenders & loggers definition ends here -->
+
+ <root level="DEBUG">
+ <appender-ref ref="DEBUG" />
+ <appender-ref ref="STDOUT" />
+ </root>
+</included>
+
--- /dev/null
+#-------------------------------------------------------------------------------
+# Copyright © 2017-2019 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the â??Licenseâ?\9d);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# https://creativecommons.org/licenses/by/4.0/
+#
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
--- /dev/null
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /share/logs
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /share/debug-logs
+ - name: {{ include "common.fullname" . }}-config
+ mountPath: /share/etc/config
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: logback.xml
+ path: logback.xml
+ - key: ticketmgt.properties
+ path: ticketmgt.properties
+ - key: cadi.properties
+ path: cadi.properties
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright (c) 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+
+subChartsOnly:
+ enabled: true
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/optf-cmso-ticketmgt:latest
+pullPolicy: Always
+
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+
+service:
+ type: ClusterIP
+ name: oof-cmso-ticketmgt
+ portName: cmso-ticketmgt
+ internalPort: 7999
+ externalPort: 7999
+ #nodePort: 23
+ # as of 20181022 port 23 is reserved for cmso
+ # see https://wiki.onap.org/display/DW/OOM+NodePort+List
+
+
+config:
+
+
+ingress:
+ enabled: false
+
+#resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ unlimited: {}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Chart for Change Management Service Orchestrator (CMSO) Service
+name: oof-cmso-topology
+version: 4.0.0
--- /dev/null
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a
+# copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
+# or implied. See the License for the specific language governing
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+#
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
--- /dev/null
+<?xml version = "1.0" encoding = "UTF-8" ?>
+<!--
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<included>
+ <jmxConfigurator />
+ <!-- Example evaluator filter applied against console appender -->
+<property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="defaultPattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+ <property name="debugPattern" value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n"/>
+
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="ERROR"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <file>${logDirectory}/error2.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/cmso/error.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+
+ <appender name="DEBUG"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/debug.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/cmso/debug.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ </appender>
+
+
+ <appender name="AUDIT"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/audit.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/audit.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFAudit"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="AUDIT" />
+ </appender>
+
+ <appender name="METRIC"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/metric.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+ %msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/metric.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFMetrics"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="METRIC" />
+ </appender>
+
+ <!-- SECURITY related loggers -->
+ <appender name="SECURITY"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/security.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/security.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFSecurity"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="SECURITY" />
+ </appender>
+ <!-- AAF related loggers -->
+ <logger name="org.onap.aaf" level="INFO" additivity="true">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <logger name="org.apache.catalina.core" level="INFO"
+ additivity="true">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <logger name="org.onap.cmso" level="INFO"
+ additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger name="com.att.eelf.error" level="OFF" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+ <!-- EELF related loggers -->
+ <logger name="com.att.eelf.audit" level="INFO"
+ additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger name="com.att.eelf.security" level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="DEBUG" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="org.apache" level="DEBUG" />
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="INFO" />
+ <logger name="ch.qos.logback.core" level="INFO" />
+
+ <!-- logback jms appenders & loggers definition starts here -->
+ <appender name="auditLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <appender name="perfLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <logger name="AuditRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="AuditRecord_DirectCall" level="INFO"
+ additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="PerfTrackerRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="perfLogs" />
+ </logger>
+ <!-- logback jms appenders & loggers definition ends here -->
+
+ <root level="DEBUG">
+ <appender-ref ref="DEBUG" />
+ <appender-ref ref="STDOUT" />
+ </root>
+</included>
+
--- /dev/null
+#-------------------------------------------------------------------------------
+# Copyright © 2017-2019 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the â??Licenseâ?\9d);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# https://creativecommons.org/licenses/by/4.0/
+#
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
--- /dev/null
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /share/logs
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /share/debug-logs
+ - name: {{ include "common.fullname" . }}-config
+ mountPath: /share/etc/config
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: logback.xml
+ path: logback.xml
+ - key: cadi.properties
+ path: cadi.properties
+ - key: topology.properties
+ path: topology.properties
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+
+subChartsOnly:
+ enabled: true
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/optf-cmso-topology:latest
+pullPolicy: Always
+
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+
+service:
+ type: ClusterIP
+ name: oof-cmso-topology
+ portName: cmso-topology
+ internalPort: 7998
+ externalPort: 7998
+ #nodePort: 23
+ # as of 20181022 port 23 is reserved for cmso
+ # see https://wiki.onap.org/display/DW/OOM+NodePort+List
+
+
+config:
+
+ingress:
+ enabled: false
+
+#resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ unlimited: {}
osUser: centos
nameserver: 8.8.8.8
ntp: pool.ntp.org
- mirrorNodePort: 88
apps:
fsType: local
networkCidr: 10.0.0.0/16
},
"cassandra": {
+ "cassandra_port": 9042,
"concurrent_reads": "32",
"num_tokens": "256",
"data_dir": "/var/lib/cassandra/data",
# ============LICENSE_END=========================================================
###
+# Append features to karaf boot feature configuration
+# $1 additional feature to be added
+# $2 repositories to be added (optional)
+function addToFeatureBoot() {
+ CFG=$ODL_HOME/etc/org.apache.karaf.features.cfg
+ ORIG=$CFG.orig
+ if [ -n "$2" ] ; then
+ echo "Add repository: $2"
+ mv $CFG $ORIG
+ cat $ORIG | sed -e "\|featuresRepositories|s|$|,$2|" > $CFG
+ fi
+ echo "Add boot feature: $1"
+ mv $CFG $ORIG
+ cat $ORIG | sed -e "\|featuresBoot *=|s|$|,$1|" > $CFG
+}
+
+# Append features to karaf boot feature configuration
+# $1 search pattern
+# $2 replacement
+function replaceFeatureBoot() {
+ CFG=$ODL_HOME/etc/org.apache.karaf.features.cfg
+ ORIG=$CFG.orig
+ echo "Replace boot feature $1 with: $2"
+ sed -i "/featuresBoot/ s/$1/$2/g" $CFG
+}
+
+function install_sdnrwt_features() {
+ addToFeatureBoot "$SDNRWT_BOOTFEATURES" $SDNRWT_REPOSITORY
+}
+
function enable_odl_cluster(){
if [ -z $SDNC_REPLICAS ]; then
echo "SDNC_REPLICAS is not configured in Env field"
exit
fi
+ #Be sure to remove feature odl-netconf-connector-all from list
+ replaceFeatureBoot "odl-netconf-connector-all,"
+
echo "Installing Opendaylight cluster features"
- mv $ODL_HOME/etc/org.apache.karaf.features.cfg $ODL_HOME/etc/org.apache.karaf.features.cfg.orig
- cat $ODL_HOME/etc/org.apache.karaf.features.cfg.orig | sed -e "\|featuresBoot=config|s|$|,odl-mdsal-clustering,odl-jolokia|" > $ODL_HOME/etc/org.apache.karaf.features.cfg
+ replaceFeatureBoot odl-netconf-topology odl-netconf-clustered-topology
+ replaceFeatureBoot odl-mdsal-all odl-mdsal-all,odl-mdsal-clustering
+ addToFeatureBoot odl-jolokia
#${ODL_HOME}/bin/client feature:install odl-mdsal-clustering
#${ODL_HOME}/bin/client feature:install odl-jolokia
+
echo "Update cluster information statically"
hm=$(hostname)
ENABLE_ODL_CLUSTER=${ENABLE_ODL_CLUSTER:-false}
GEO_ENABLED=${GEO_ENABLED:-false}
DBINIT_DIR=${DBINIT_DIR:-/opt/opendaylight/current/daexim}
+SDNRWT=${SDNRWT:-false}
+SDNRWT_BOOTFEATURES=${SDNRWT_BOOTFEATURES:-sdnr-wt-feature-aggregator}
+
+echo "Settings:"
+echo " ENABLE_ODL_CLUSTER=$ENABLE_ODL_CLUSTER"
+echo " SDNC_REPLICAS=$SDNC_REPLICAS"
+echo " SDNRWT=$SDNRWT"
#
# Wait for database to init properly
if $ENABLE_ODL_CLUSTER ; then enable_odl_cluster ; fi
+ if $SDNRWT ; then install_sdnrwt_features ; fi
+
echo "Installed at `date`" > ${SDNC_HOME}/.installed
fi
mso:
auth: D1A67FA93B6A6419132D0F83CC771AF774FD3C60853C50C22C8C6FC5088CC79E9E81EDE9EA39F22B2F66A0068E
logPath: ./logs/openstack
+ msb-ip: msb-iag.{{ include "common.namespace" . }}
+ msb-port: 80
workflow:
endpoint: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/sobpmnengine
msoKey: 07a7159d3bf51a0e53be7a8f89699be7
aai:
endpoint: https://aai.{{ include "common.namespace" . }}:8443
auth: 6E081E10B1CA43A843E303733A74D9B23B601A6E22A21C7EF2C7F15A42F81A1A4E85E65268C2661F71321052C7F3E55B96A8E1E951F8BF6F
+ extApi:
+ endpoint: http://nbi.onap:8080/nbi/api/v3
so:
operational-environment:
dmaap:
Code Review / oom.git / commitdiff