+++ /dev/null
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
-
-#ignore config docker image files
-docker
-createConfig.sh
\ No newline at end of file
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP configuration pod
-name: config
-version: 1.1.0
+++ /dev/null
-#!/bin/bash
-
-usage() {
- cat <<EOF
-Usage: $0 [PARAMs]
--u : Display usage
--n [NAMESPACE] : Kubernetes namespace (required)
-EOF
-}
-
-create_namespace() {
- kubectl create namespace $1
-}
-
-create_configuration() {
- create_namespace $1
- helm install . --name "$1-config" --namespace $1 --set nsPrefix=$1
-}
-
-#MAINs
-NS=
-
-while getopts ":n:u:" PARAM; do
- case $PARAM in
- u)
- usage
- exit 1
- ;;
- n)
- NS=${OPTARG}
- ;;
- ?)
- usage
- exit
- ;;
- esac
-done
-
-if [[ -z $NS ]]; then
- usage
- exit 1
-fi
-
-printf "\n**** Creating configuration for ONAP instance: $NS\n"
-create_configuration $NS
-
-printf "**** Done ****\n"
+++ /dev/null
-from ubuntu:16.04
-
-ENV no_proxy "localhost,127.0.0.1,.cluster.local,$KUBERNETES_SERVICE_HOST"
-# Setup Corporate proxy
-ENV https_proxy ${HTTPS_PROXY}
-ENV http_proxy ${HTTP_PROXY}
-
-# Additional packages
-RUN apt-get update
-RUN apt-get install -y openssl vim-common
-RUN mkdir -p /opt/config/src/
-
-COPY onap-cfg.tar.gz /tmp/
-RUN tar -zxvf /tmp/onap-cfg.tar.gz -C /opt/config/src/
-COPY config-init.sh /root/config-init.sh
-RUN chmod a+x /root/config-init.sh
-ENTRYPOINT /root/config-init.sh
+++ /dev/null
-#!/bin/bash -x
-
-concat_array() {
- local arr=("$@")
- local str=''
- for i in ${!arr[@]}; do
- if (( $i > 0 )); then
- str="${str};"
- fi
- str="${str}${arr[$i]}"
- done
- echo "$str"
-}
-
-echo "Validating onap-parameters.yaml has been populated"
-[[ -z "$OPENSTACK_UBUNTU_14_IMAGE" ]] && { echo "Error: OPENSTACK_UBUNTU_14_IMAGE must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_PUBLIC_NET_ID" ]] && { echo "Error: OPENSTACK_PUBLIC_NET_ID must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_OAM_NETWORK_ID" ]] && { echo "Error: OPENSTACK_OAM_NETWORK_ID must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_OAM_SUBNET_ID" ]] && { echo "Error: OPENSTACK_OAM_SUBNET_ID must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_OAM_NETWORK_CIDR" ]] && { echo "Error: OPENSTACK_OAM_NETWORK_CIDR must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_USERNAME" ]] && { echo "Error: OPENSTACK_USERNAME must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_TENANT_ID" ]] && { echo "Error: OPENSTACK_TENANT_ID must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_API_KEY" ]] && { echo "Error: OPENSTACK_API_KEY must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_REGION" ]] && { echo "Error: OPENSTACK_REGION must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_KEYSTONE_URL" ]] && { echo "Error: OPENSTACK_KEYSTONE_URL must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_FLAVOUR_MEDIUM" ]] && { echo "Error: OPENSTACK_FLAVOUR_MEDIUM must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_SERVICE_TENANT_NAME" ]] && { echo "Error: OPENSTACK_SERVICE_TENANT_NAME must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$DMAAP_TOPIC" ]] && { echo "Error: DMAAP_TOPIC must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$DEMO_ARTIFACTS_VERSION" ]] && { echo "Error: DEMO_ARTIFACTS_VERSION must be set in onap-parameters.yaml"; exit 1; }
-[[ -z "$OPENSTACK_TENANT_NAME" ]] && { echo "Error: OPENSTACK_TENANT_NAME must be set in onap-parameters.yaml"; exit 1; }
-
-#make NAMESPACE directory
-echo "Creating $NAMESPACE directory if it doesn't exist"
-mkdir -p /config-init/$NAMESPACE/
-
-#unzip the configs in the NAMESPACEs directory ensuring no overwriting of files
-echo "Installing configuration files"
-cp -vnpr /opt/config/src/* /config-init/$NAMESPACE/
-
-#ensure db directories exist.
-mkdir -p /config-init/$NAMESPACE/appc/data/
-mkdir -p /config-init/$NAMESPACE/dcae/pgaas/pgdata/
-mkdir -p /config-init/$NAMESPACE/portal/mariadb/data/
-mkdir -p /config-init/$NAMESPACE/portal/logs/
-mkdir -p /config-init/$NAMESPACE/sdnc/data/
-mkdir -p /config-init/$NAMESPACE/vid/mariadb/data/
-mkdir -p /config-init/$NAMESPACE/sdc/sdc-cs/CS/
-mkdir -p /config-init/$NAMESPACE/sdc/logs/ASDC/ASDC-ES/
-mkdir -p /config-init/$NAMESPACE/sdc/logs/ASDC/ASDC-CS/
-mkdir -p /config-init/$NAMESPACE/sdc/logs/ASDC/ASDC-KB/
-mkdir -p /config-init/$NAMESPACE/sdc/logs/ASDC/ASDC-BE/
-mkdir -p /config-init/$NAMESPACE/sdc/logs/ASDC/ASDC-FE/
-mkdir -p /config-init/$NAMESPACE/aai/opt/aai/logroot/
-mkdir -p /config-init/$NAMESPACE/aai/model-loader/logs/
-mkdir -p /config-init/$NAMESPACE/aai/aai-traversal/logs/
-mkdir -p /config-init/$NAMESPACE/aai/aai-resources/logs/
-mkdir -p /config-init/$NAMESPACE/aai/sparky-be/logs/
-mkdir -p /config-init/$NAMESPACE/aai/elasticsearch/es-data/
-mkdir -p /config-init/$NAMESPACE/aai/search-data-service/logs/
-mkdir -p /config-init/$NAMESPACE/aai/data-router/logs/
-mkdir -p /config-init/$NAMESPACE/mso/mariadb/data
-mkdir -p /config-init/$NAMESPACE/clamp/mariadb/data
-mkdir -p /config-init/$NAMESPACE/log/elasticsearch/data
-mkdir -p /config-init/$NAMESPACE/consul/consul-agent-config/bin
-mkdir -p /config-init/$NAMESPACE/consul/consul-agent-config/scripts
-mkdir -p /config-init/$NAMESPACE/consul/consul-server-config
-
-echo "Setting permissions to container writeable directories"
-chmod -R 777 /config-init/$NAMESPACE/sdc/logs/
-chmod -R 777 /config-init/$NAMESPACE/portal/logs/
-chmod -R 777 /config-init/$NAMESPACE/aai/aai-config/
-chmod -R 777 /config-init/$NAMESPACE/aai/aai-data/
-chmod -R 777 /config-init/$NAMESPACE/aai/opt/aai/logroot/
-chmod -R 777 /config-init/$NAMESPACE/aai/model-loader/logs/
-chmod -R 777 /config-init/$NAMESPACE/aai/haproxy/log/
-chmod -R 777 /config-init/$NAMESPACE/aai/aai-traversal/logs/
-chmod -R 777 /config-init/$NAMESPACE/aai/aai-resources/logs/
-chmod -R 777 /config-init/$NAMESPACE/aai/sparky-be/logs/
-chmod -R 777 /config-init/$NAMESPACE/aai/elasticsearch/es-data/
-chmod -R 777 /config-init/$NAMESPACE/aai/search-data-service/logs/
-chmod -R 777 /config-init/$NAMESPACE/aai/data-router/logs/
-chmod -R 777 /config-init/$NAMESPACE/log/elasticsearch
-chown -R root:root /config-init/$NAMESPACE/log
-
-# SDNC/Robot preload files manipulation
-OPENSTACK_OAM_NETWORK_CIDR_PREFIX=`cut -d. -f1-3 <<<"$OPENSTACK_OAM_NETWORK_CIDR"`
-# MSO post install steps to encrypt openstack password
-MSO_ENCRYPTION_KEY=$(cat /config-init/$NAMESPACE/mso/mso/encryption.key)
-OPENSTACK_API_ENCRYPTED_KEY=`echo -n "$OPENSTACK_API_KEY" | openssl aes-128-ecb -e -K $MSO_ENCRYPTION_KEY -nosalt | xxd -c 256 -p`
-
-echo "Substituting configuration parameters"
-
-# replace the default 'onap' namespace qualification of K8s hostnames within the config files
-SED_NS_PATHS="/config-init/$NAMESPACE/"
-SED_NS_STRINGS=(
- "s/\.namespace-placeholder/\.${NAMESPACE}/g"
- "s/kubectl -n namespace-placeholder/kubectl -n ${NAMESPACE}/g"
-)
-SED_NS_STRING=$(concat_array "${SED_NS_STRINGS[@]}")
-find $SED_NS_PATHS -type f -exec sed -i -e "${SED_NS_STRING}" {} \;
-
-# set variable parameters
-# ATTENTION: the list of the paths must be verified if more parameters are added!
-SED_CONFIG_PATHS="/config-init/$NAMESPACE/robot/ /config-init/$NAMESPACE/mso/"
-SED_CONFIG_STRINGS=( \
- "s/UBUNTU_14_IMAGE_NAME_HERE/${OPENSTACK_UBUNTU_14_IMAGE}/g" \
- "s/OPENSTACK_PUBLIC_NET_ID_HERE/${OPENSTACK_PUBLIC_NET_ID}/g" \
- "s/OPENSTACK_NETWORK_ID_WITH_ONAP_ROUTE_HERE/${OPENSTACK_OAM_NETWORK_ID}/g" \
- "s/OPENSTACK_SUBNET_ID_WITH_ONAP_ROUTE_HERE/${OPENSTACK_OAM_SUBNET_ID}/g" \
- "s,NETWORK_CIDR_WITH_ONAP_ROUTE_HERE,${OPENSTACK_OAM_NETWORK_CIDR},g" \
- "s/OPENSTACK_USERNAME_HERE/${OPENSTACK_USERNAME}/g" \
- "s/OPENSTACK_TENANT_ID_HERE/${OPENSTACK_TENANT_ID}/g" \
- "s/OPENSTACK_PASSWORD_HERE/${OPENSTACK_API_KEY}/g" \
- "s/OPENSTACK_REGION_HERE/${OPENSTACK_REGION}/g" \
- "s,OPENSTACK_KEYSTONE_IP_HERE,${OPENSTACK_KEYSTONE_URL},g" \
- "s/OPENSTACK_FLAVOUR_MEDIUM_HERE/${OPENSTACK_FLAVOUR_MEDIUM}/g" \
- "s/DMAAP_TOPIC_HERE/${DMAAP_TOPIC}/g" \
- "s/OPENSTACK_SERVICE_TENANT_NAME_HERE/${OPENSTACK_SERVICE_TENANT_NAME}/g" \
- "s/DEMO_ARTIFACTS_VERSION_HERE/${DEMO_ARTIFACTS_VERSION}/g" \
- "s/OPENSTACK_OAM_NETWORK_CIDR_PREFIX_HERE/${OPENSTACK_OAM_NETWORK_CIDR_PREFIX}/g" \
- "s/OPENSTACK_ENCRYPTED_PASSWORD_HERE/${OPENSTACK_API_ENCRYPTED_KEY}/g" \
- "s/OPENSTACK_TENANT_NAME_HERE/${OPENSTACK_TENANT_NAME}/g" \
-)
-SED_CONFIG_STRING=$(concat_array "${SED_CONFIG_STRINGS[@]}")
-find $SED_CONFIG_PATHS -type f -exec sed -i -e "${SED_CONFIG_STRING}" {} \;
-
-echo "Done!"
+++ /dev/null
-#!/bin/bash
-
-cd src/config
-
-TAR=/usr/local/opt/gnu-tar/libexec/gnubin/tar
-OS="`uname`"
-case $OS in
- 'Linux')
- OS='Linux'
- TAR=/usr/bin/tar
- ;;
- 'Darwin')
- OS='Mac'
- ;;
- *) ;;
-esac
-
-$TAR -cvzf ../../onap-cfg.tar.gz *
+++ /dev/null
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
-
- # The below commented properties are for time-based rolling policy. But as the log4j 1.2x does not support time-based rolling these properties are not set
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- #ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- #clean_inactive: 96h
-
- #Multiline properties for log4j xml log events
- multiline.pattern: '</log4j:event>'
- multiline.negate: true
- multiline.match: before
- #multiline.max_lines: 500
- #multiline.timeout: 5s
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.namespace-placeholder:5044"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
+++ /dev/null
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- clean_inactive: 96h
-
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["logstash.namespace-placeholder:5044"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
+++ /dev/null
-0
-25
-ECOMP-PORTAL-OUTBOX-VID1 0 0
-PDPD-CONFIGURATION 0 2
-msgrtr.apinode.metrics.dmaap 1 26
-unauthenticated.SEC_MEASUREMENT_OUTPUT 1 1
-APPC-TEST2 0 0
-unauthenticated.TCA_EVENT_OUTPUT 1 1
-APPC-TEST1 0 0
-APPC-CL 0 2
-ECOMP-PORTAL-INBOX 0 0
-APPC-CL 1 0
-APPC-TEST2 1 1
-unauthenticated.TCA_EVENT_OUTPUT 0 1
-unauthenticated.SEC_MEASUREMENT_OUTPUT 0 1
-SDC-DISTR-NOTIF-TOPIC-SDC-OPENSOURCE-ENV1 0 0
-POLICY-CL-MGT 1 1
-PDPD-CONFIGURATION 1 0
-DCAE-CL-EVENT 1 1
-msgrtr.apinode.metrics.dmaap 0 4
-ECOMP-PORTAL-OUTBOX-APP1 0 0
-ECOMP-PORTAL-OUTBOX-SDC1 0 0
-POLICY-CL-MGT 0 1
-SDC-DISTR-STATUS-TOPIC-SDC-OPENSOURCE-ENV1 0 0
-DCAE-CL-EVENT 0 1
-ECOMP-PORTAL-OUTBOX-DBC1 0 0
-ECOMP-PORTAL-OUTBOX-POL1 0 0
+++ /dev/null
-0
-25
-ECOMP-PORTAL-OUTBOX-VID1 0 0
-PDPD-CONFIGURATION 0 2
-msgrtr.apinode.metrics.dmaap 1 26
-unauthenticated.SEC_MEASUREMENT_OUTPUT 1 1
-APPC-TEST2 0 0
-unauthenticated.TCA_EVENT_OUTPUT 1 1
-APPC-TEST1 0 0
-APPC-CL 0 2
-ECOMP-PORTAL-INBOX 0 0
-APPC-CL 1 0
-APPC-TEST2 1 1
-unauthenticated.TCA_EVENT_OUTPUT 0 1
-unauthenticated.SEC_MEASUREMENT_OUTPUT 0 1
-SDC-DISTR-NOTIF-TOPIC-SDC-OPENSOURCE-ENV1 0 0
-POLICY-CL-MGT 1 1
-PDPD-CONFIGURATION 1 0
-DCAE-CL-EVENT 1 1
-msgrtr.apinode.metrics.dmaap 0 4
-ECOMP-PORTAL-OUTBOX-APP1 0 0
-ECOMP-PORTAL-OUTBOX-SDC1 0 0
-POLICY-CL-MGT 0 1
-SDC-DISTR-STATUS-TOPIC-SDC-OPENSOURCE-ENV1 0 0
-DCAE-CL-EVENT 0 1
-ECOMP-PORTAL-OUTBOX-DBC1 0 0
-ECOMP-PORTAL-OUTBOX-POL1 0 0
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-OPENSTACK_UBUNTU_14_IMAGE: "Ubuntu_14.04.5_LTS"
-OPENSTACK_PUBLIC_NET_ID: "e8f51956-00dd-4425-af36-045716781ffc"
-OPENSTACK_OAM_NETWORK_ID: "d4769dfb-c9e4-4f72-b3d6-1d18f4ac4ee6"
-OPENSTACK_OAM_SUBNET_ID: "191f7580-acf6-4c2b-8ec0-ba7d99b3bc4e"
-OPENSTACK_OAM_NETWORK_CIDR: "192.168.30.0/24"
-OPENSTACK_USERNAME: "vnf_user"
-OPENSTACK_API_KEY: "vnf_password"
-OPENSTACK_TENANT_NAME: "vnfs"
-OPENSTACK_TENANT_ID: "47899782ed714295b1151681fdfd51f5"
-OPENSTACK_REGION: "RegionOne"
-OPENSTACK_KEYSTONE_URL: "http://1.2.3.4:5000"
-OPENSTACK_FLAVOUR_MEDIUM: "m1.medium"
-OPENSTACK_SERVICE_TENANT_NAME: "service"
-DMAAP_TOPIC: "AUTO"
-DEMO_ARTIFACTS_VERSION: "1.1.0-SNAPSHOT"
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-OPENSTACK_UBUNTU_14_IMAGE: ""
-OPENSTACK_PUBLIC_NET_ID: ""
-OPENSTACK_OAM_NETWORK_ID: ""
-OPENSTACK_OAM_SUBNET_ID: ""
-OPENSTACK_OAM_NETWORK_CIDR: ""
-OPENSTACK_USERNAME: ""
-OPENSTACK_API_KEY: ""
-OPENSTACK_TENANT_NAME: ""
-OPENSTACK_TENANT_ID: ""
-OPENSTACK_REGION: ""
-OPENSTACK_KEYSTONE_URL: ""
-OPENSTACK_FLAVOUR_MEDIUM: ""
-OPENSTACK_SERVICE_TENANT_NAME: ""
-DMAAP_TOPIC: ""
-DEMO_ARTIFACTS_VERSION: ""
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: global-onap-configmap
- namespace: "{{ .Values.nsPrefix }}"
-data:
-{{ .Files.Get "onap-parameters.yaml" | indent 2 }}
----
-apiVersion: v1
-kind: Pod
-metadata:
- name: {{ .Chart.Name }}
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- containers:
- - name: {{ .Chart.Name }}
- image: "{{ .Values.image.repository }}"
- imagePullPolicy: {{ .Values.image.pullPolicy }}
- envFrom:
- - configMapRef:
- name: global-onap-configmap
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- fieldPath: metadata.namespace
- - name: NAMESPACE_PREFIX
- value: {{ .Values.nsPrefix }}
- - name: DOCKER_SHARE_PATH
- value: {{ .Values.dockerSharePath }}
- volumeMounts:
- - name: config-init-root
- mountPath: /config-init/
- volumes:
- - name: config-init-root
- hostPath:
- path: {{ .Values.dockerSharePath }}
- restartPolicy: Never
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Default values for config.
-nsPrefix: onap
-dockerSharePath: /dockerdata-nfs
-image:
- repository: oomk8s/config-init:2.0.0-SNAPSHOT
- pullPolicy: Always
Code Review / oom.git / commitdiff