on other O/Ss), the Kubernetes command line interface used to manage a
Kubernetes cluster::
- > curl -LO https://storage.googleapis.com/kubernetes-release/release/v1.8.10/bin/linux/amd64/kubectl
+ > curl -LO https://storage.googleapis.com/kubernetes-release/release/v1.15.11/bin/linux/amd64/kubectl
> chmod +x ./kubectl
> sudo mv ./kubectl /usr/local/bin/kubectl
> mkdir ~/.kube
> kubectl get pods --all-namespaces
-At this point you should see six Kubernetes pods running.
+At this point you should see Kubernetes pods running.
Install Helm
~~~~~~~~~~~~
In any case, setup of the Helm repository is a one time activity.
-Next, install Helm Plugins required to deploy the ONAP Casablanca release::
+Next, install Helm Plugins required to deploy the ONAP release::
> cp -R ~/oom/kubernetes/helm/plugins/ ~/.local/share/helm/plugins
Once the repo is setup, installation of ONAP can be done with a single
command::
- > helm deploy development local/onap --namespace onap
+ > helm deploy development local/onap --namespace onap --set global.masterPassword=password
This will install ONAP from a local repository in a 'development' Helm release.
As described below, to override the default configuration values provided by
OOM, an environment file can be provided on the command line as follows::
- > helm deploy development local/onap --namespace onap -f overrides.yaml
+
+
+ > helm deploy development local/onap --namespace onap -f overrides.yaml --set global.masterPassword=password
+
+.. note::
+ Refer the Configure_ section on how to update overrides.yaml and values.yaml
To get a summary of the status of all of the pods (containers) running in your
deployment::
- > kubectl get pods --all-namespaces -o=wide
+ > kubectl get pods --namespace onap -o=wide
.. note::
The Kubernetes namespace concept allows for multiple instances of a component
(such as all of ONAP) to co-exist with other components in the same
Kubernetes cluster by isolating them entirely. Namespaces share only the
hosts that form the cluster thus providing isolation between production and
- development systems as an example. The OOM deployment of ONAP in Beijing is
- now done within a single Kubernetes namespace where in Amsterdam a namespace
- was created for each of the ONAP components.
+ development systems as an example.
.. note::
The Helm `--name` option refers to a release name and not a Kubernetes namespace.
To install a specific version of a single ONAP component (`so` in this example)
with the given release name enter::
- > helm deploy so onap/so --version 3.0.1
+ > helm deploy so onap/so --version 8.0.0 --set global.masterPassword=password --set global.flavor=unlimited --namespace onap
+
+.. note::
+ The dependent components should be installed for component being installed
+
To display details of a specific resource or group of resources type::
To deploy ONAP with this environment file, enter::
- > helm deploy local/onap -n onap -f environments/onap-production.yaml
+ > helm deploy local/onap -n onap -f onap/resources/environments/onap-production.yaml --set global.masterPassword=password
.. include:: environments_onap_demo.yaml
:code: yaml
dependencies:
<...>
- name: so
- version: ~2.0.0
+ version: ~8.0.0
repository: '@local'
condition: so.enabled
<...>
-The ~ operator in the `so` version value indicates that the latest "2.X.X"
+The ~ operator in the `so` version value indicates that the latest "8.X.X"
version of `so` shall be used thus allowing the chart to allow for minor
-upgrades that don't impact the so API; hence, version 2.0.1 will be installed
+upgrades that don't impact the so API; hence, version 8.0.1 will be installed
in this case.
-The onap/resources/environment/onap-dev.yaml (see the excerpt below) enables
+The onap/resources/environment/dev.yaml (see the excerpt below) enables
for fine grained control on what components are included as part of this
deployment. By changing this `so` line to `enabled: false` the `so` component
will not be deployed. If this change is part of an upgrade the existing `so`
To see the real-time health of a deployment go to: ``http://<kubernetes IP>:30270/ui/``
where a GUI much like the following will be found:
+.. note::
+ If Consul GUI is not accessible, you can refer this
+ `kubectl port-forward <https://kubernetes.io/docs/tasks/access-application-cluster/port-forward-access-application-cluster/>`_ method to access an application
.. figure:: oomLogoV2-Heal.png
:align: right
In order to change the size of a cluster, an operator could use a helm upgrade
(described in detail in the next section) as follows::
- > helm upgrade --set replicaCount=3 onap/so/mariadb
+ > helm upgrade [RELEASE] [CHART] [flags]
+
+The RELEASE argument can be obtained from the following command::
+
+ > helm list
+
+Below is the example for the same::
+
+ > helm list
+ NAME REVISION UPDATED STATUS CHART APP VERSION NAMESPACE
+ dev 1 Wed Oct 14 13:49:52 2020 DEPLOYED onap-8.0.0 Honolulu onap
+ dev-cassandra 5 Thu Oct 15 14:45:34 2020 DEPLOYED cassandra-8.0.0 onap
+ dev-contrib 1 Wed Oct 14 13:52:53 2020 DEPLOYED contrib-8.0.0 onap
+ dev-mariadb-galera 1 Wed Oct 14 13:55:56 2020 DEPLOYED mariadb-galera-8.0.0 onap
+
+Here the Name column shows the RELEASE NAME, In our case we want to try the
+scale operation on cassandra, thus the RELEASE NAME would be dev-cassandra.
+
+Now we need to obtain the chart name for casssandra. Use the below
+command to get the chart name::
+
+ > helm search cassandra
+
+Below is the example for the same::
+
+ > helm search cassandra
+ NAME CHART VERSION APP VERSION DESCRIPTION
+ local/cassandra 8.0.0 ONAP cassandra
+ local/portal-cassandra 8.0.0 Portal cassandra
+ local/aaf-cass 8.0.0 ONAP AAF cassandra
+ local/sdc-cs 8.0.0 ONAP Service Design and Creation Cassandra
+
+Here the Name column shows the chart name. As we want to try the scale
+operation for cassandra, thus the correponding chart name is local/cassandra
+
+
+Now we have both the command's arguments, thus we can perform the
+scale opeartion for cassandra as follows::
+
+ > helm upgrade dev-cassandra local/cassandra --set replicaCount=3
+
+Using this command we can scale up or scale down the cassadra db instances.
+
The ONAP components use Kubernetes provided facilities to build clustered,
highly available systems including: Services_ with load-balancers, ReplicaSet_,
> helm list
NAME REVISION UPDATED STATUS CHART NAMESPACE
- so 1 Mon Feb 5 10:05:22 2018 DEPLOYED so-2.0.1 default
+ so 1 Mon Feb 5 10:05:22 2020 DEPLOYED so-8.0.0 onap
When upgrading a cluster a parameter controls the minimum size of the cluster
during the upgrade while another parameter controls the maximum number of nodes
For example, to upgrade a container by changing configuration, specifically an
environment value::
- > helm deploy onap onap/so --version 2.0.1 --set enableDebug=true
+ > helm upgrade so onap/so --version 8.0.1 --set enableDebug=true
Issuing this command will result in the appropriate container being stopped by
Kubernetes and replaced with a new container with the new environment value.
To upgrade a component to a new version with a new configuration file enter::
- > helm deploy onap onap/so --version 2.0.2 -f environments/demo.yaml
+ > helm upgrade so onap/so --version 8.0.1 -f environments/demo.yaml
To fetch release history enter::
> helm history so
REVISION UPDATED STATUS CHART DESCRIPTION
- 1 Mon Feb 5 10:05:22 2018 SUPERSEDED so-2.0.1 Install complete
- 2 Mon Feb 5 10:10:55 2018 DEPLOYED so-2.0.2 Upgrade complete
+ 1 Mon Feb 5 10:05:22 2020 SUPERSEDED so-8.0.0 Install complete
+ 2 Mon Feb 5 10:10:55 2020 DEPLOYED so-8.0.1 Upgrade complete
Unfortunately, not all upgrades are successful. In recognition of this the
lineup of pods within an ONAP deployment is tagged such that an administrator
> helm history so
REVISION UPDATED STATUS CHART DESCRIPTION
- 1 Mon Feb 5 10:05:22 2018 SUPERSEDED so-2.0.1 Install complete
- 2 Mon Feb 5 10:10:55 2018 SUPERSEDED so-2.0.2 Upgrade complete
- 3 Mon Feb 5 10:14:32 2018 DEPLOYED so-2.0.1 Rollback to 1
+ 1 Mon Feb 5 10:05:22 2020 SUPERSEDED so-8.0.0 Install complete
+ 2 Mon Feb 5 10:10:55 2020 SUPERSEDED so-8.0.1 Upgrade complete
+ 3 Mon Feb 5 10:14:32 2020 DEPLOYED so-8.0.0 Rollback to 1
.. note::
Existing deployments can be partially or fully removed once they are no longer
needed. To minimize errors it is recommended that before deleting components
from a running deployment the operator perform a 'dry-run' to display exactly
-what will happen with a given command prior to actually deleting anything. For
-example::
+what will happen with a given command prior to actually deleting anything.
+For example::
> helm undeploy onap --dry-run
> helm undeploy onap
+Once complete undeploy is done then delete the namespace as well
+using following command::
+
+ > kubectl delete namespace <name of namespace>
+
+.. note::
+ You need to provide the namespace name which you used during deployment,
+ below is the example::
+
+ > kubectl delete namespace onap
+
One can also remove individual components from a deployment by changing the
ONAP configuration values. For example, to remove `so` from a running
deployment enter::
"password": "${A1CONTROLLER_PASSWORD}"
}
],
- "ric": [
- {
- "name": "ric1",
- "baseUrl": "{{ .Values.ricLink }}",
- "controller": "controller1",
- "managedElementIds": [
- "kista_1",
- "kista_2"
- ]
- }
- ],
+ "ric": {{ include "a1p.generateRics" . | indent 6 | trim }},
"streams_publishes": {
"dmaap_publisher": {
"type": "message_router",
--- /dev/null
+{{/*
+# Copyright © 2021 Samsung Electronics
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- define "a1p.generateRics" }}
+ {{- $ricList := (list) }}
+ {{- range $ric := .Values.rics }}
+ {{- $ricItem := (dict "name" $ric.name "baseUrl" $ric.link "controller" "controller1" "managedElementIds" $ric.managedElementIds) }}
+ {{- $ricList = append $ricList $ricItem }}
+ {{- end }}
+ {{- toPrettyJson $ricList }}
+{{- end }}
echo "*** change ownership of certificates to targeted user"
chown -R 1000 .
-image: onap/ccsdk-oran-a1policymanagementservice:1.0.1
+image: onap/ccsdk-oran-a1policymanagementservice:1.1.1
userID: 1000 #Should match with image-defined user ID
groupID: 999 #Should match with image-defined group ID
pullPolicy: IfNotPresent
password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
sdncLink: https://sdnc.onap:8443
-# Add your own A1 Mediator link. Supports both STD & OSC Version. ex. http://<ip>:<port>
-# Alternatively you can also use the A1 simulator available in ORAN. It provides STD & OSC Version for A1 termination.
+# The information about A1-Mediator/RICs can be added here.
+# The A1 policy management service supports both STD & OSC versions.
+# Alternatively, the A1 simulator from ORAN-SC can also be used. It provides STD & OSC versions for A1 termination.
# Refer source code & run in docker container : https://gerrit.o-ran-sc.org/r/admin/repos/sim/a1-interface
-# Refer it/dep repo for k8's deployment: https://gerrit.o-ran-sc.org/r/admin/repos/it/dep
-ricLink:
+# Refer it/dep repo for k8s deployment: https://gerrit.o-ran-sc.org/r/admin/repos/it/dep
+# Example configuration:
+#rics:
+# - name: ric1
+# link: http://ric1url.url.com:1111/
+# managedElementIds:
+# - kista1
+# - kista2
+# - name: ric2
+# link: http://ric2url.url.com:2222/
+# managedElementIds:
+# - kista3
+# - kista4
+rics:
streamPublish: http://message-router:3904/events/A1-POLICY-AGENT-WRITE
streamSubscribe: http://message-router:3904/events/A1-POLICY-AGENT-READ/users/policy-agent?timeout=15000&limit=100
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-blueprintsprocessor:1.0.3
+image: onap/ccsdk-blueprintsprocessor:1.1.1
pullPolicy: Always
# flag to enable debugging - application support required
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-commandexecutor:1.0.3
+image: onap/ccsdk-commandexecutor:1.1.1
pullPolicy: Always
# application configuration
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-py-executor:1.0.3
+image: onap/ccsdk-py-executor:1.1.1
pullPolicy: Always
# default number of instances
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-sdclistener:1.0.3
+image: onap/ccsdk-sdclistener:1.1.1
name: sdc-listener
pullPolicy: Always
{{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
# application image
-image: onap/ccsdk-cds-ui-server:1.0.3
+image: onap/ccsdk-cds-ui-server:1.1.1
pullPolicy: Always
# application configuration
--- /dev/null
+{{/*
+# Copyright © 2021 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{/*
+ Generate comma separated list of kafka or zookeper nodes to reuse in message router charts.
+ How to use:
+
+ zookeeper servers list: {{ include "common.kafkaNodes" (dict "dot" . "replicaCount" (index .Values "message-router-zookeeper" "replicaCount") "componentName" .Values.zookeeper.name "port" .Values.zookeeper.port ) }}
+ kafka servers list: {{ include "common.kafkaNodes" (dict "dot" . "replicaCount" (index .Values "message-router-kafka" "replicaCount") "componentName" .Values.kafka.name "port" .Values.kafka.port ) }}
+
+*/}}
+{{- define "common.kafkaNodes" -}}
+{{- $dot := .dot -}}
+{{- $replicaCount := .replicaCount -}}
+{{- $componentName := .componentName -}}
+{{- $port := .port -}}
+{{- $kafkaNodes := list -}}
+{{- range $i, $e := until (int $replicaCount) -}}
+{{- $kafkaNodes = print (include "common.release" $dot) "-" $componentName "-" $i "." $componentName "." (include "common.namespace" $dot) ".svc.cluster.local:" $port | append $kafkaNodes -}}
+{{- end -}}
+{{- $kafkaNodes | join "," -}}
+{{- end -}}
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-dgbuilder-image:1.0.2
+image: onap/ccsdk-dgbuilder-image:1.1.1
pullPolicy: Always
# flag to enable debugging - application support required
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-apps-ms-neng:1.0.2
+image: onap/ccsdk-apps-ms-neng:1.1.1
pullPolicy: IfNotPresent
# application configuration
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{
-{{ if .Values.componentImages.holmes_engine }}
- "he_image" : '{{ include "repositoryGenerator.repository" . }}/{{ .Values.componentImages.holmes_engine }}',
-{{ end }}
- "msb_hostname": "{{ .Values.config.address.msb_iag }}.{{include "common.namespace" . }}",
- "dcae_CL_publish_url": "http://{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}:3904/events/unauthenticated.DCAE_CL_OUTPUT",
- "ves_fault_publish_url": "http://{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}:3904/events/unauthenticated.SEC_FAULT_OUTPUT",
- "pgaas_cluster_name" : "{{ .Values.postgres.service.name2 }}.{{include "common.namespace" . }}",
- "database_name":"holmes"
-}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{
-{{ if .Values.componentImages.holmes_rules }}
- "hr_image" : '{{ include "repositoryGenerator.repository" . }}/{{ .Values.componentImages.holmes_rules }}',
-{{ end }}
-
- "msb_hostname": "{{ .Values.config.address.msb_iag }}.{{include "common.namespace" . }}",
- "pgaas_cluster_name" : "{{ .Values.postgres.service.name2 }}.{{include "common.namespace" . }}",
- "database_name":"holmes"
-}
- --container-name
- consul-server
- --container-name
- - msb-discovery
- - --container-name
- - kube2msb
- - --container-name
- dcae-config-binding-service
- --container-name
- dcae-db
#============LICENSE_START========================================================
#=================================================================================
-# Copyright (c) 2018-2020 AT&T Intellectual Property. All rights reserved.
+# Copyright (c) 2018-2021 AT&T Intellectual Property. All rights reserved.
# Modifications Copyright © 2018 Amdocs, Bell Canada
# Copyright (c) 2021 J. F. Lucas. All rights reserved.
# ================================================================================
disableNfsProvisioner: true
# application image
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:3.0.3
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:3.0.4
default_k8s_location: central
# DCAE component images to be deployed via Cloudify Manager
# Use to override default setting in blueprints
componentImages:
- holmes_rules: onap/holmes/rule-management:1.2.9
- holmes_engine: onap/holmes/engine-management:1.2.9
tcagen2: onap/org.onap.dcaegen2.analytics.tca-gen2.dcae-analytics-tca-web:1.2.1
ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.8.0
- snmptrap: onap/org.onap.dcaegen2.collectors.snmptrap:2.0.4
prh: onap/org.onap.dcaegen2.services.prh.prh-app-server:1.5.6
hv_ves: onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.6.0
- datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.5.4
# Resource Limit flavor -By Default using small
flavor: small
{{- $global := . -}}
{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
{{- if eq "True" (include "common.needPV" .) -}}
-{{ range $i, $e := until (atoi (quote $global.Values.replicaCount) | default 3) }}
+{{ range $i, $e := until (int $global.Values.replicaCount) }}
---
apiVersion: v1
kind: PersistentVolume
metadata:
name: {{ include "common.release" $global }}-{{ $global.Values.service.name }}-{{ $i }}
- namespace: {{ $global.Release.Namespace }}
+ namespace: {{ include "common.namespace" $global }}
labels:
app: {{ $global.Values.service.name }}
chart: {{ $global.Chart.Name }}-{{ $global.Chart.Version | replace "+" "_" }}
*/}}
{{- $root := . -}}
-{{ range $i, $e := until (atoi (quote $root.Values.replicaCount) | default 3) }}
+{{ range $i, $e := until (int $root.Values.replicaCount) }}
---
apiVersion: v1
kind: Service
metadata:
name: {{ $root.Values.service.name }}-{{ $i }}
- namespace: {{ $root.Release.Namespace }}
+ namespace: {{ include "common.namespace" $root }}
labels:
app: {{ $root.Values.service.name }}
chart: {{ $root.Chart.Name }}-{{ $root.Chart.Version | replace "+" "_" }}
apiVersion: v1
fieldPath: status.hostIP
- name: KAFKA_ZOOKEEPER_CONNECT
- value: {{ include "common.release" . }}-{{.Values.zookeeper.name}}-0.{{.Values.zookeeper.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.zookeeper.port}},{{ include "common.release" . }}-{{.Values.zookeeper.name}}-1.{{.Values.zookeeper.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.zookeeper.port}},{{ include "common.release" . }}-{{.Values.zookeeper.name}}-2.{{.Values.zookeeper.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.zookeeper.port}}
+ value: "{{ include "common.kafkaNodes" (dict "dot" . "replicaCount" .Values.zookeeper.replicaCount "componentName" .Values.zookeeper.name "port" .Values.zookeeper.port ) }}"
- name: KAFKA_CONFLUENT_SUPPORT_METRICS_ENABLE
value: "{{ .Values.kafka.enableSupport }}"
{{- if .Values.global.aafEnabled }}
zookeeper:
name: message-router-zookeeper
port: 2181
+ replicaCount: 3
kafka:
heapOptions: -Xmx5G -Xms1G
{{- $global := . -}}
{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
{{- if eq "True" (include "common.needPV" .) -}}
-{{ range $i, $e := until (atoi (quote $global.Values.replicaCount) | default 3) }}
+{{ range $i, $e := until (int $global.Values.replicaCount) }}
---
apiVersion: v1
kind: PersistentVolume
metadata:
name: {{ include "common.release" $global }}-{{ $global.Values.service.name }}-{{ $i }}
- namespace: {{ $global.Release.Namespace }}
+ namespace: {{ include "common.namespace" $global }}
labels:
app: {{ $global.Values.service.name }}
chart: {{ $global.Chart.Name }}-{{ $global.Chart.Version | replace "+" "_" }}
#config.zk.servers=172.18.1.1
#config.zk.servers={{.Values.zookeeper.name}}:{{.Values.zookeeper.port}}
*/}}
-config.zk.servers={{include "common.release" .}}-{{.Values.zookeeper.name}}-0.{{.Values.zookeeper.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.zookeeper.port}},{{include "common.release" .}}-{{.Values.zookeeper.name}}-1.{{.Values.zookeeper.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.zookeeper.port}},{{include "common.release" .}}-{{.Values.zookeeper.name}}-2.{{.Values.zookeeper.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.zookeeper.port}}
-
+config.zk.servers={{ include "common.kafkaNodes" (dict "dot" . "replicaCount" (index .Values "message-router-zookeeper" "replicaCount") "componentName" .Values.zookeeper.name "port" .Values.zookeeper.port ) }}
#config.zk.root=/fe3c/cambria/config
## if you want to change request.required.acks it can take this one value
#kafka.metadata.broker.list=localhost:9092,localhost:9093
#kafka.metadata.broker.list={{.Values.kafka.name}}:{{.Values.kafka.port}}
-kafka.metadata.broker.list={{include "common.release" .}}-{{.Values.kafka.name}}-0.{{.Values.kafka.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.kafka.port}},{{include "common.release" .}}-{{.Values.kafka.name}}-1.{{.Values.kafka.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.kafka.port}},{{include "common.release" .}}-{{.Values.kafka.name}}-2.{{.Values.kafka.name}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.kafka.port}}
+kafka.metadata.broker.list={{ include "common.kafkaNodes" (dict "dot" . "replicaCount" (index .Values "message-router-kafka" "replicaCount") "componentName" .Values.kafka.name "port" .Values.kafka.port ) }}
+
##kafka.request.required.acks=-1
#kafka.client.zookeeper=${config.zk.servers}
consumer.timeout.ms=100
cambria.consumer.cache.zkBasePath=/fe3c/cambria/consumerCache
consumer.timeout=17
default.partitions=3
-default.replicas=3
+default.replicas={{ index .Values "message-router-kafka" "replicaCount" }}
##############################################################################
#100mb
maxcontentlength=10000
kafka.max.poll.interval.ms=300000
kafka.heartbeat.interval.ms=60000
kafka.session.timeout.ms=240000
-kafka.max.poll.records=1000
\ No newline at end of file
+kafka.max.poll.records=1000
# See the License for the specific language governing permissions and
# limitations under the License.
-->
-<included>
+<configuration>
<jmxConfigurator />
<!-- Example evaluator filter applied against console appender -->
<property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
</logger>
<!-- logback jms appenders & loggers definition ends here -->
- <root level="DEBUG">
+ <root level="INFO">
<appender-ref ref="DEBUG" />
<appender-ref ref="STDOUT" />
</root>
-</included>
+</configuration>
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cmso-aaf-creds" "key" "login") | indent 10}}
- name: AAF_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cmso-aaf-creds" "key" "password") | indent 10}}
+ - name: VM_ARGS
+ value: "-Dcom.att.eelf.logging.file=logback.xml -Dcom.att.eelf.logging.path=/share/etc/config"
command:
- /bin/sh
args:
enabled: true
# application image
-image: onap/optf-cmso-optimizer:2.3.2
+image: onap/optf-cmso-optimizer:2.3.3
pullPolicy: Always
#init container image
dbinit:
- image: onap/optf-cmso-dbinit:2.3.2
+ image: onap/optf-cmso-dbinit:2.3.3
# flag to enable debugging - application support required
debugEnabled: false
# See the License for the specific language governing permissions and
# limitations under the License.
-->
-<included>
+<configuration>
<jmxConfigurator />
<!-- Example evaluator filter applied against console appender -->
<property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
</logger>
<!-- logback jms appenders & loggers definition ends here -->
- <root level="DEBUG">
+ <root level="INFO">
<appender-ref ref="DEBUG" />
<appender-ref ref="STDOUT" />
</root>
-</included>
+</configuration>
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cmso-aaf-creds" "key" "login") | indent 10}}
- name: AAF_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cmso-aaf-creds" "key" "password") | indent 10}}
+ - name: VM_ARGS
+ value: "-Dcom.att.eelf.logging.file=logback.xml -Dcom.att.eelf.logging.path=/share/etc/config"
command:
- /bin/sh
args:
enabled: true
# application image
-image: onap/optf-cmso-service:2.3.2
-robotimage: onap/optf-cmso-robot:2.3.2
+image: onap/optf-cmso-service:2.3.3
+robotimage: onap/optf-cmso-robot:2.3.3
pullPolicy: Always
#init container image
dbinit:
- image: onap/optf-cmso-dbinit:2.3.2
+ image: onap/optf-cmso-dbinit:2.3.3
# flag to enable debugging - application support required
debugEnabled: false
# See the License for the specific language governing permissions and
# limitations under the License.
-->
-<included>
+<configuration>
<jmxConfigurator />
<!-- Example evaluator filter applied against console appender -->
<property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
</logger>
<!-- logback jms appenders & loggers definition ends here -->
- <root level="DEBUG">
+ <root level="INFO">
<appender-ref ref="DEBUG" />
<appender-ref ref="STDOUT" />
</root>
-</included>
+</configuration>
value: {{ .Values.global.truststorePassword }}
- name: AUTHENTICATION
value: proprietary-auth
+ - name: VM_ARGS
+ value: "-Dcom.att.eelf.logging.file=logback.xml -Dcom.att.eelf.logging.path=/share/etc/config"
command:
- /bin/sh
args:
enabled: true
# application image
-image: onap/optf-cmso-ticketmgt:2.3.2
+image: onap/optf-cmso-ticketmgt:2.3.3
pullPolicy: Always
# See the License for the specific language governing permissions and
# limitations under the License.
-->
-<included>
+<configuration>
<jmxConfigurator />
<!-- Example evaluator filter applied against console appender -->
<property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
</logger>
<!-- logback jms appenders & loggers definition ends here -->
- <root level="DEBUG">
+ <root level="INFO">
<appender-ref ref="DEBUG" />
<appender-ref ref="STDOUT" />
</root>
-</included>
+</configuration>
value: {{ .Values.global.truststorePassword }}
- name: AUTHENTICATION
value: {{ .Values.global.authentication }}
+ - name: VM_ARGS
+ value: "-Dcom.att.eelf.logging.file=logback.xml -Dcom.att.eelf.logging.path=/share/etc/config"
command:
- /bin/sh
args:
enabled: true
# application image
-image: onap/optf-cmso-topology:2.3.2
+image: onap/optf-cmso-topology:2.3.3
pullPolicy: Always
GLOBAL_INJECTED_SO_REQDB_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "so-request-db-adapter") }}'
GLOBAL_INJECTED_SO_SDNC_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "so-sdnc-adapter") }}'
GLOBAL_INJECTED_SO_VFC_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "so-vfc-adapter") }}'
-GLOBAL_INJECTED_SO_VNFM_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "so-vnfm-adapter") }}'
+GLOBAL_INJECTED_SO_VNFM_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "so-etsi-sol003-adapter") }}'
GLOBAL_INJECTED_SO_NSSMF_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "so-nssmf-adapter") }}'
GLOBAL_INJECTED_UBUNTU_1404_IMAGE = '{{ .Values.ubuntu14Image }}'
GLOBAL_INJECTED_UBUNTU_1604_IMAGE = '{{ .Values.ubuntu16Image }}'
GLOBAL_SO_REQDB_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "so-request-db-adapter" "port" 8083) }}'
GLOBAL_SO_SDNC_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "so-sdnc-adapter" "port" 8086) }}'
GLOBAL_SO_VFC_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "so-vfc-adapter" "port" 8084) }}'
-GLOBAL_SO_VNFM_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "so-vnfm-adapter" "port" 9092) }}'
+GLOBAL_SO_VNFM_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "so-etsi-sol003-adapter" "port" 9092) }}'
GLOBAL_SO_NSSMF_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "so-nssmf-adapter" "port" 8088) }}'
GLOBAL_SO_USERNAME = '{{ .Values.soUsername }}'
GLOBAL_SO_CATDB_USERNAME = '{{ .Values.soCatdbUsername }}'
GLOBAL_CCSDK_CDS_PASSWORD = 'ccsdkapps'
GLOBAL_CCSDK_CDS_AUTHENTICATION = [GLOBAL_CCSDK_CDS_USERNAME, GLOBAL_CCSDK_CDS_PASSWORD]
GLOBAL_CDS_AUTH = "Y2NzZGthcHBzOmNjc2RrYXBwcw=="
-
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdnc-dmaap-listener-image:2.0.5
+image: onap/sdnc-dmaap-listener-image:2.1.3
pullPolicy: Always
# flag to enable debugging - application support required
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdnc-ansible-server-image:2.0.5
+image: onap/sdnc-ansible-server-image:2.1.3
pullPolicy: Always
# flag to enable debugging - application support required
# Application configuration defaults.
#################################################################
# application image
-image: "onap/sdnc-web-image:2.0.5"
+image: "onap/sdnc-web-image:2.1.3"
pullPolicy: Always
config:
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdnc-ueb-listener-image:2.0.5
+image: onap/sdnc-ueb-listener-image:2.1.3
pullPolicy: Always
# flag to enable debugging - application support required
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "aai-user-creds" "key" "login") | indent 10 }}
- name: AAI_CLIENT_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "aai-user-creds" "key" "password") | indent 10 }}
+ - name: AAI_TRUSTSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "aai-truststore-password" "key" "password") | indent 10 }}
+ - name: ANSIBLE_TRUSTSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "ansible-truststore-password" "key" "password") | indent 10 }}
+ - name: SO_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "so-user-creds" "key" "login") | indent 10 }}
+ - name: SO_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "so-user-creds" "key" "password") | indent 10 }}
+ - name: NENG_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "neng-user-creds" "key" "login") | indent 10 }}
+ - name: NENG_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "neng-user-creds" "key" "password") | indent 10 }}
+ - name: CDS_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cds-user-creds" "key" "login") | indent 10 }}
+ - name: CDS_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cds-user-creds" "key" "password") | indent 10 }}
+ - name: HONEYCOMB_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "honeycomb-user-creds" "key" "login") | indent 10 }}
+ - name: HONEYCOMB_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "honeycomb-user-creds" "key" "password") | indent 10 }}
+ - name: TRUSTSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "truststore-password" "key" "password") | indent 10 }}
+ - name: KEYSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "keystore-password" "key" "password") | indent 10 }}
+ - name: DMAAP_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dmaap-user-creds" "key" "login") | indent 10 }}
+ - name: DMAAP_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dmaap-user-creds" "key" "password") | indent 10 }}
+ - name: DMAAP_AUTHKEY
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dmaap-authkey" "key" "password") | indent 10 }}
- name: MODELSERVICE_USER
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "modeling-user-creds" "key" "login") | indent 10 }}
- name: MODELSERVICE_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 10 }}
- name: SDNC_DB_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 10 }}
+ - name: MYSQL_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 10 }}
+ - name: MYSQL_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 10 }}
- name: ODL_ADMIN_USERNAME
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "login") | indent 10 }}
+ - name: ODL_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "login") | indent 10 }}
- name: ODL_ADMIN_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "password") | indent 10 }}
+ - name: ODL_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "password") | indent 10 }}
{{ if and .Values.config.sdnr.dmaapProxy.enabled .Values.config.sdnr.dmaapProxy.usepwd }}
- name: DMAAP_HTTP_PROXY_USERNAME
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dmaap-proxy-creds" "key" "login") | indent 10 }}
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-password" "key" "password") | indent 12 }}
- name: ODL_ADMIN_USERNAME
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "login") | indent 12 }}
+ - name: ODL_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "login") | indent 12 }}
- name: ODL_ADMIN_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "password") | indent 12 }}
+ - name: ODL_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "odl-creds" "key" "password") | indent 12 }}
- name: SDNC_DB_USER
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }}
- name: SDNC_DB_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }}
+ - name: MYSQL_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }}
+ - name: MYSQL_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }}
+ - name: MYSQL_DATABASE
+ value: "{{ .Values.config.dbSdnctlDatabase }}"
- name: SDNC_CONFIG_DIR
value: "{{ .Values.config.configDir }}"
+ - name: AAI_CLIENT_NAME
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "aai-user-creds" "key" "login") | indent 12 }}
+ - name: AAI_CLIENT_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "aai-user-creds" "key" "password") | indent 12 }}
+ - name: AAI_TRUSTSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "aai-truststore-password" "key" "password") | indent 12 }}
+ - name: ANSIBLE_TRUSTSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "ansible-truststore-password" "key" "password") | indent 12 }}
+ - name: SO_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "so-user-creds" "key" "login") | indent 12 }}
+ - name: SO_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "so-user-creds" "key" "password") | indent 12 }}
+ - name: NENG_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "neng-user-creds" "key" "login") | indent 12 }}
+ - name: NENG_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "neng-user-creds" "key" "password") | indent 12 }}
+ - name: CDS_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cds-user-creds" "key" "login") | indent 12 }}
+ - name: CDS_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "cds-user-creds" "key" "password") | indent 12 }}
+ - name: HONEYCOMB_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "honeycomb-user-creds" "key" "login") | indent 12 }}
+ - name: HONEYCOMB_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "honeycomb-user-creds" "key" "password") | indent 12 }}
+ - name: TRUSTSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "truststore-password" "key" "password") | indent 12 }}
+ - name: KEYSTORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "keystore-password" "key" "password") | indent 12 }}
+ - name: DMAAP_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dmaap-user-creds" "key" "login") | indent 12 }}
+ - name: DMAAP_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dmaap-user-creds" "key" "password") | indent 12 }}
+ - name: DMAAP_AUTHKEY
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dmaap-authkey" "key" "password") | indent 12 }}
- name: ENABLE_ODL_CLUSTER
value: "{{ .Values.config.enableClustering }}"
- name: MY_ODL_CLUSTER
externalSecret: '{{ .Values.config.netboxApikeyExternalSecret }}'
password: '{{ .Values.config.netboxApikey }}'
passwordPolicy: required
+ - uid: aai-truststore-password
+ type: password
+ externalSecret: '{{ .Values.config.aaiTruststoreExternalSecret }}'
+ password: '{{ .Values.config.aaiTruststorePassword }}'
+ passwordPolicy: required
+ - uid: ansible-truststore-password
+ type: password
+ externalSecret: '{{ .Values.config.ansibleTruststoreExternalSecret }}'
+ password: '{{ .Values.config.ansibleTruststorePassword }}'
+ passwordPolicy: required
+ - uid: truststore-password
+ type: password
+ externalSecret: '{{ .Values.config.truststoreExternalSecret }}'
+ password: '{{ .Values.config.truststorePassword }}'
+ passwordPolicy: required
+ - uid: keystore-password
+ type: password
+ externalSecret: '{{ .Values.config.keystoreExternalSecret }}'
+ password: '{{ .Values.config.keystorePassword }}'
+ passwordPolicy: required
+ - uid: dmaap-authkey
+ type: password
+ externalSecret: '{{ .Values.config.dmaapAuthKeyExternalSecret }}'
+ password: '{{ .Values.config.dmaapAuthKey }}'
+ passwordPolicy: required
- uid: aai-user-creds
type: basicAuth
externalSecret: '{{ .Values.config.aaiCredsExternalSecret}}'
login: '{{ .Values.config.aaiUser }}'
password: '{{ .Values.config.aaiPassword }}'
passwordPolicy: required
+ - uid: so-user-creds
+ type: basicAuth
+ externalSecret: '{{ .Values.config.soCredsExternalSecret}}'
+ login: '{{ .Values.config.soUser }}'
+ password: '{{ .Values.config.soPassword }}'
+ passwordPolicy: required
+ - uid: neng-user-creds
+ type: basicAuth
+ externalSecret: '{{ .Values.config.nengCredsExternalSecret}}'
+ login: '{{ .Values.config.nengUser }}'
+ password: '{{ .Values.config.nengPassword }}'
+ passwordPolicy: required
+ - uid: cds-user-creds
+ type: basicAuth
+ externalSecret: '{{ .Values.config.cdsCredsExternalSecret}}'
+ login: '{{ .Values.config.cdsUser }}'
+ password: '{{ .Values.config.cdsPassword }}'
+ passwordPolicy: required
+ - uid: honeycomb-user-creds
+ type: basicAuth
+ externalSecret: '{{ .Values.config.honeycombCredsExternalSecret}}'
+ login: '{{ .Values.config.honeycombUser }}'
+ password: '{{ .Values.config.honeycombPassword }}'
+ passwordPolicy: required
+ - uid: dmaap-user-creds
+ type: basicAuth
+ externalSecret: '{{ .Values.config.dmaapCredsExternalSecret}}'
+ login: '{{ .Values.config.dmaapUser }}'
+ password: '{{ .Values.config.dmaapPassword }}'
+ passwordPolicy: required
- uid: modeling-user-creds
type: basicAuth
externalSecret: '{{ .Values.config.modelingCredsExternalSecret}}'
# application images
pullPolicy: Always
-image: onap/sdnc-image:2.0.5
+image: onap/sdnc-image:2.1.3
# flag to enable debugging - application support required
debugEnabled: false
# odlCredsExternalSecret: some secret
netboxApikey: onceuponatimeiplayedwithnetbox20180814
# netboxApikeyExternalSecret: some secret
+ aaiTruststorePassword: changeit
+ # aaiTruststoreExternalSecret: some secret
+ ansibleTruststorePassword: changeit
+ # ansibleTruststoreExternalSecret: some secret
+ truststorePassword: adminadmin
+ # truststoreExternalSecret: some secret
+ keystorePassword: adminadmin
+ # keystoreExternalSecret: some secret
aaiUser: sdnc@sdnc.onap.org
aaiPassword: demo123456!
# aaiCredsExternalSecret: some secret
+ soUser: sdncaBpmn
+ soPassword: password1$
+ # soCredsExternalSecret: some secret
+ nengUser: ccsdkapps
+ nengPassword: ccsdkapps
+ # nengCredsExternalSecret: some secret
+ cdsUser: ccsdkapps
+ cdsPassword: ccsdkapps
+ # cdsCredsExternalSecret: some secret
+ honeycombUser: admin
+ honeycombPassword: admin
+ # honeycombCredsExternalSecret: some secret
+ dmaapUser: admin
+ dmaapPassword: admin
+ dmaapAuthKey: "fs20cKwalJ6ry4kX:7Hqm6BDZK47IKxGRkOPFk33qMYs="
+ # dmaapCredsExternalSecret: some secret
+ # dmaapAuthKeyExternalSecret: some secret
modelingUser: ccsdkapps
modelingPassword: ccsdkapps
# modelingCredsExternalSecret: some secret
# @author: gareth.roper@ericsson.com
apiVersion: v1
description: A Helm chart for ONAP Service Orchestration Monitoring
-name: so-monitoring
+name: so-admin-cockpit
version: 8.0.0
security:
usercredentials:
-
- username: ${SO_MONITORING_USERNAME}
- password: ${SO_MONITORING_PASSWORD}
+ username: ${SO_COCKPIT_USERNAME}
+ password: ${SO_COCKPIT_PASSWORD}
role: GUI-Client
APP: {{ index .Values.app }}
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}-configmap
+ name: {{ include "common.fullname" . }}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}-app-configmap
+ name: {{ include "common.fullname" . }}-app
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
args:
- -c
- |
- export SO_MONITORING_PASSWORD=`htpasswd -bnBC 10 "" $SO_MON_PASS | tr -d ':\n' | sed 's/\$2y/\$2a/'`
+ export SO_COCKPIT_PASSWORD=`htpasswd -bnBC 10 "" $SO_COCKPIT_PASS | tr -d ':\n' | sed 's/\$2y/\$2a/'`
{{- if .Values.global.aafEnabled }}
export $(grep '^c' {{ .Values.soHelpers.certInitializer.credsPath }}/org.onap.so.cred.props | xargs -0)
export $(cat {{ .Values.soHelpers.certInitializer.credsPath }}/mycreds.prop | xargs -0)
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-admin-creds" "key" "login") | indent 10 }}
- name: DB_ADMIN_PASSWORD
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-admin-creds" "key" "password") | indent 10 }}
- - name: SO_MONITORING_USERNAME
+ - name: SO_COCKPIT_USERNAME
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "app-user-creds" "key" "login") | indent 10 }}
- - name: SO_MON_PASS
+ - name: SO_COCKPIT_PASS
{{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "app-user-creds" "key" "password") | indent 10 }}
envFrom:
- configMapRef:
- name: {{ include "common.fullname" . }}-configmap
+ name: {{ include "common.fullname" . }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
volumeMounts: {{ include "so.certificate.volumeMount" . | nindent 8 }}
- name: logs
emptyDir: {}
- name: config
configMap:
- name: {{ include "common.fullname" . }}-app-configmap
+ name: {{ include "common.fullname" . }}-app
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
# Copyright (C) 2018 Ericsson. All rights reserved.
# Copyright (C) 2020 Huawei
# Modifications Copyright © 2020 Nokia
+# Modifications Copyright © 2021 Orange
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
passwordPolicy: required
- uid: app-user-creds
type: basicAuth
- externalSecret: '{{ tpl (default "" .Values.server.monitoring.soMonitoringCredsExternalSecret) . }}'
- login: '{{ .Values.server.monitoring.username }}'
- password: '{{ .Values.server.monitoring.password }}'
+ externalSecret: '{{ tpl (default "" .Values.server.cockpit.soMonitoringCredsExternalSecret) . }}'
+ login: '{{ .Values.server.cockpit.username }}'
+ password: '{{ .Values.server.cockpit.password }}'
#secretsFilePaths: |
# - 'my file 1'
# Application configuration defaults.
#################################################################
repository: nexus3.onap.org:10001
-image: onap/so/so-monitoring:1.7.11
+image: onap/so/so-admin-cockpit:1.8.2
pullPolicy: Always
db:
minReadySeconds: 10
containerPort: &containerPort 9091
logPath: app/logs/
-app: so-monitoring
+app: so-admin-cockpit
#################################################################
# soHelpers part
#################################################################
soHelpers:
- nameOverride: so-monitoring-cert-init
+ nameOverride: so-cockpit-cert-init
certInitializer:
- nameOverride: so-monitoring-cert-init
+ nameOverride: so-cockpit-cert-init
credsPath: /opt/app/osaaf/local
cadi:
apiEnforcement: org.onap.so.monitoringPerm
containerPort: *containerPort
server:
- monitoring:
+ cockpit:
username: demo
# password: demo123456!
# soMonitoringCredsExternalSecret: some secret
nodePort: 24
internalPort: *containerPort
externalPort: *containerPort
- portName: so-monitor-port
+ portName: http
updateStrategy:
type: RollingUpdate
maxUnavailable: 1
ingress:
enabled: false
service:
- - baseaddr: "somonitoring"
- name: "so-monitoring"
+ - baseaddr: "soadmincockpit"
+ name: "so-admin-cockpit"
port: 9091
config:
ssl: "none"
so:
vnfm:
adapter:
- url: http://so-vnfm-adapter.{{ include "common.namespace" . }}:9092/so/vnfm-adapter/v1/
- auth: {{ .Values.so.vnfm.adapter.auth }}
+ url: http://so-etsi-sol003-adapter.{{ include "common.namespace" . }}:9092/so/vnfm-adapter/v1
+ auth: {{ .Values.so.sol003.adapter.auth }}
org:
onap:
so:
oof:
auth: test:testpwd
so:
- vnfm:
+ sol003:
adapter:
auth: Basic dm5mbTpwYXNzd29yZDEk
sniro:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/mso-cnf-adapter:1.7.11
+image: onap/so/mso-cnf-adapter:1.8.0
pullPolicy: Always
readinessCheck:
so:
adapters:
sol003-adapter:
- url: http://so-vnfm-adapter.{{ include "common.namespace" . }}:9092/so/vnfm-adapter/v1
+ url: http://so-etsi-sol003-adapter.{{ include "common.namespace" . }}:9092/so/vnfm-adapter/v1
auth: {{ .Values.so.sol003.adapter.auth }}
etsi-catalog-manager:
base:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/so-etsi-nfvo-ns-lcm:1.7.11
+image: onap/so/so-etsi-nfvo-ns-lcm:1.8.2
pullPolicy: Always
aai:
# See the License for the specific language governing permissions and
# limitations under the License.
apiVersion: v1
-description: ONAP SO VNFM Adapter
-name: so-vnfm-adapter
+description: ONAP SO ETSI SOL003 Adapter
+name: so-etsi-sol003-adapter
version: 8.0.0
mso:
key: {{ .Values.mso.key }}
site-name: localSite
- logPath: ./logs/vnfm-adapter
+ logPath: ./logs/etsi-sol003-adapter
config:
cadi: {{ include "so.cadi.keys" . | nindent 8}}
msb-ip: msb-iag
key: {{ .Values.sdc.key }}
endpoint: https://sdc-be.{{ include "common.namespace" . }}:8443
vnfmadapter:
- endpoint: http://so-vnfm-adapter.{{ include "common.namespace" . }}:9092
+ endpoint: http://so-etsi-sol003-adapter.{{ include "common.namespace" . }}:9092
etsi-catalog-manager:
vnfpkgm:
{{- if .Values.global.msbEnabled }}
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/vnfm-adapter:1.7.11
+image: onap/so/so-etsi-sol003-adapter:1.8.2
pullPolicy: Always
aaf:
replicaCount: 1
minReadySeconds: 10
containerPort: &containerPort 9092
-logPath: ./logs/vnfm-adapter/
-app: vnfm-adapter
+logPath: ./logs/etsi-sol003-adapter/
+app: etsi-sol003-adapter
service:
type: NodePort
internalPort: *containerPort
externalPort: *containerPort
nodePort: "06"
- portName: so-vnfm-port
+ portName: http
updateStrategy:
type: RollingUpdate
maxUnavailable: 1
# soHelpers part
#################################################################
soHelpers:
- nameOverride: so-vnfm-cert-init
+ nameOverride: so-etsi-sol003-cert-init
certInitializer:
- nameOverride: so-vnfm-cert-init
+ nameOverride: so-etsi-sol003-cert-init
credsPath: /opt/app/osaaf/local
cadi:
apiEnforcement: org.onap.so.vnfmAdapterPerm
ingress:
enabled: false
service:
- - baseaddr: "sovnfmadapter"
- name: "so-vnfm-adapter"
+ - baseaddr: "soetsisol003adapter"
+ name: "so-etsi-sol003-adapter"
port: 9092
config:
ssl: "redirect"
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/nssmf-adapter:1.7.11
+image: onap/so/nssmf-adapter:1.8.0
pullPolicy: Always
db:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/so-oof-adapter:1.7.11
+image: onap/so/so-oof-adapter:1.8.2
pullPolicy: Always
mso:
- name: soHelpers
version: ~8.x-0
repository: 'file://components/soHelpers'
+ - name: so-admin-cockpit
+ version: ~8.x-0
+ repository: 'file://components/so-admin-cockpit'
+ condition: so-admin-cockpit.enabled
- name: so-appc-orchestrator
version: ~8.x-0
repository: 'file://components/so-appc-orchestrator'
version: ~8.x-0
repository: 'file://components/so-etsi-nfvo-ns-lcm'
condition: so-etsi-nfvo-ns-lcm.enabled
+ - name: so-etsi-sol003-adapter
+ version: ~8.x-0
+ repository: 'file://components/so-etsi-sol003-adapter'
+ condition: so-etsi-sol003-adapter.enabled
- name: so-mariadb
version: ~8.x-0
repository: 'file://components/so-mariadb'
- - name: so-monitoring
- version: ~8.x-0
- repository: 'file://components/so-monitoring'
- condition: so-monitoring.enabled
- name: so-nssmf-adapter
version: ~8.x-0
repository: 'file://components/so-nssmf-adapter'
version: ~8.x-0
repository: 'file://components/so-vfc-adapter'
condition: so-vfc-adapter.enabled
- - name: so-vnfm-adapter
- version: ~8.x-0
- repository: 'file://components/so-vnfm-adapter'
- condition: so-vnfm-adapter.enabled
userCredsExternalSecret: *dbUserCredsSecretName
adminCredsExternalSecret: *dbAdminCredsSecretName
-so-monitoring:
+so-admin-cockpit:
enabled: true
db:
<<: *dbSecrets
db:
<<: *dbSecrets
-so-vnfm-adapter:
+so-etsi-sol003-adapter:
enabled: true
# application image
repository: nexus3.onap.org:10001
-image: onap/usecase-ui-server:3.0.7
+image: onap/usecase-ui-server:4.0.0
pullPolicy: Always
# application configuration
flavor: small
# application image
-image: onap/usecase-ui:3.0.6
+image: onap/usecase-ui:4.0.0
pullPolicy: Always
# application configuration
Code Review / oom.git / commitdiff