#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_cm:2.1.1
+image: onap/aaf/aaf_cm:2.1.2-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_fs:2.1.1
+image: onap/aaf/aaf_fs:2.1.2-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_gui:2.1.1
+image: onap/aaf/aaf_gui:2.1.2-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_hello:2.1.1
+image: onap/aaf/aaf_hello:2.1.2-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_locate:2.1.1
+image: onap/aaf/aaf_locate:2.1.2-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_oauth:2.1.1
+image: onap/aaf/aaf_oauth:2.1.2-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_service:2.1.1
+image: onap/aaf/aaf_service:2.1.2-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient:latest
+image: onap/aaf/smsquorumclient:2.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/sms:latest
+image: onap/aaf/sms:2.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/ccsdk-dgbuilder-image:0.2.4
+image: onap/ccsdk-dgbuilder-image:0.3-STAGING-latest
pullPolicy: Always
# flag to enable debugging - application support required
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.1
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.2
# DCAE component images to be deployed via Cloudify Manager
# Use to override default setting in blueprints
componentImages:
config_binding_service: onap/org.onap.dcaegen2.platform.configbinding:2.1.5
- deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:2.1.5
- holmes_engine: onap/holmes/engine-management:1.1.0
- holmes_rules: onap/holmes/rule-management:1.1.0
- inventory: onap/org.onap.dcaegen2.platform.inventory-api:3.0.1
- policy_handler: onap/org.onap.dcaegen2.platform.policy-handler:2.4.5
+ deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:3.0.2
+ holmes_engine: onap/holmes/engine-management:1.2.0-STAGING-latest
+ holmes_rules: onap/holmes/rule-management:1.2.0-STAGING-latest
+ inventory: onap/org.onap.dcaegen2.platform.inventory-api:3.0.4
+ policy_handler: onap/org.onap.dcaegen2.platform.policy-handler:4.3.1
service_change_handler: onap/org.onap.dcaegen2.platform.servicechange-handler:1.1.5
tca: onap/org.onap.dcaegen2.deployments.tca-cdap-container:1.1.0
ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.3.1
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.cm-container:1.4.0
+image: onap/org.onap.dcaegen2.deployments.cm-container:1.4.1
pullPolicy: Always
# probe configuration parameters
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/dmaap/datarouter-node
+image: onap/dmaap/datarouter-node:latest
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/dmaap/datarouter-prov
+image: onap/dmaap/datarouter-prov:latest
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_discovery:1.2.0-SNAPSHOT-latest
+image: onap/msb/msb_discovery:1.2.0-STAGING-latest
pullPolicy: Always
istioSidecar: true
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
+image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
pullPolicy: Always
istioSidecar: true
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
+image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
pullPolicy: Always
istioSidecar: true
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/multicloud/openstack-ocata:1.1.2
+image: onap/multicloud/openstack-ocata:1.2.0-STAGING
pullPolicy: Always
#Istio sidecar injection policy
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/multicloud/framework:1.1.2
+image: onap/multicloud/framework:1.2.0-STAGING
pullPolicy: Always
#Istio sidecar injection policy
ingress:
enabled: false
-# Resource Limit flavor -By Default using small
+# Resource Limit flavor -By Default using small
flavor: small
# Segregation for Different environment (Small and Large)
resources:
small:
limits:
- cpu: 1
- memory: 2Gi
- requests:
- cpu: 100m
- memory: 1Gi
+ cpu: 1
+ memory: 2Gi
+ requests:
+ cpu: 100m
+ memory: 1Gi
large:
limits:
cpu: 2
-# Copyright © 2018 Amdocs, AT&T, Bell Canada, VMware
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
osdfPlacementSOUsername: {{ .Values.config.osdfPlacementSOUsername }}
osdfPlacementSOPassword: {{ .Values.config.osdfPlacementSOPassword }}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-app:2.2.0
+image: onap/portal-app:2.3.0-STAGING-latest
pullPolicy: Always
# default number of instances
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-db:2.2.0
+image: onap/portal-db:2.3.0-STAGING-latest
pullPolicy: Always
readinessImage: readiness-check:2.0.0
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-sdk:2.2.0
+image: onap/portal-sdk:2.3.0-STAGING-latest
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-wms:2.2.0
+image: onap/portal-wms:2.3.0-STAGING-latest
pullPolicy: Always
# flag to enable debugging - application support required
- "/var/lib/ready-probe.sh"
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml (pluck .Values.flavor .Values.resources| first) | indent 12 }}
env:
- name: ENVNAME
value: {{ .Values.global.env.name }}
postStart:
exec:
command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/var/lib/jetty/config/catalog-be/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
- resources:
-{{ toYaml .Values.resources | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
-
# side car containers
- name: {{ include "common.name" . }}-filebeat-onap
image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
- "/var/lib/ready-probe.sh"
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml (pluck .Values.flavor .Values.resources| first) | indent 12 }}
env:
- name: ENVNAME
value: {{ .Values.global.env.name }}
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
readOnly: true
- resources:
-{{ toYaml .Values.resources | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
volumes:
- name: {{ include "common.fullname" . }}-localtime
hostPath:
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
scheme: HTTP
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml (pluck .Values.flavor .Values.resources| first) | indent 12 }}
env:
- name: ENVNAME
value: {{ .Values.global.env.name }}
readOnly: true
- name: {{ include "common.fullname" . }}-data
mountPath: /usr/share/elasticsearch/data/
- resources:
-{{ toYaml .Values.resources | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
volumes:
- name: {{ include "common.fullname" . }}-localtime
hostPath:
# application image
repository: nexus3.onap.org:10001
image: onap/sdc-elasticsearch:1.3-STAGING-latest
-elasticInitImage: onap/sdc-init-elasticsearch:1.2.0
+elasticInitImage: onap/sdc-init-elasticsearch:1.3-STAGING-latest
pullPolicy: Always
# flag to enable debugging - application support required
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
+
port: {{ .Values.service.internalPort }}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml (pluck .Values.flavor .Values.resources| first) | indent 12 }}
env:
- name: ENVNAME
value: {{ .Values.global.env.name }}
postStart:
exec:
command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/var/lib/jetty/config/catalog-fe/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
- resources:
-{{ toYaml .Values.resources | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
-
# side car containers
- name: {{ include "common.name" . }}-filebeat-onap
image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
port: {{ .Values.service.internalPort }}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml (pluck .Values.flavor .Values.resources| first) | indent 12 }}
env:
- name: ENVNAME
value: {{ .Values.global.env.name }}
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
readOnly: true
- resources:
-{{ toYaml .Values.resources | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
volumes:
- name: {{ include "common.fullname" . }}-localtime
hostPath:
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
- "/var/lib/ready-probe.sh"
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml (pluck .Values.flavor .Values.resources| first) | indent 12 }}
env:
- name: ENVNAME
value: {{ .Values.global.env.name }}
postStart:
exec:
command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/var/lib/jetty/config/onboarding-be/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
- resources:
-{{ toYaml .Values.resources | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
-
# side car containers
- name: {{ include "common.name" . }}-filebeat-onap
image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
#Segregation for different environment (small and large)
resources:
- small:
- limits:
- cpu: 2
- memory: 4Gi
- requests:
- cpu: 2
- memory: 4Gi
- large:
- limits:
- cpu: 4
- memory: 8Gi
- requests:
- cpu: 4
- memory: 8Gi
-
+ small:
+ limits:
+ cpu: 2
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 4Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 8Gi
+ requests:
+ cpu: 4
+ memory: 8Gi
\ No newline at end of file
#Segregation for Different environment (Small and Large)
resources:
- small:
- limits:
- cpu: 1
- memory: 1Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 2
- memory: 2Gi
+ small:
+ limits:
+ cpu: 1
+ memory: 1Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 2
+ memory: 2Gi
#segregation for different environment (small and large)
resources:
- small:
- limits:
- cpu: 1
- memory: 1Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 2
- memory: 2Gi
+ small:
+ limits:
+ cpu: 1
+ memory: 1Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 2
+ memory: 2Gi
flavor: small
#Segregation for different environment (small and large)
resources:
- small:
- limits:
- cpu: 2
- memory: 4Gi
- requests:
- cpu: 2
- memory: 4Gi
- large:
- limits:
- cpu: 4
- memory: 8Gi
- requests:
- cpu: 4
- memory: 8Gi
+ small:
+ limits:
+ cpu: 2
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 4Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 8Gi
+ requests:
+ cpu: 4
+ memory: 8Gi
#segregation for different envionment (Small and Large)
resources:
- small:
- limits:
- cpu: 2
- memory: 4Gi
- requests:
- cpu: 2
- memory: 4Gi
-
- large:
- limits:
- cpu: 4
- memory: 8Gi
- requests:
- cpu: 4
- memory: 8Gi
+ small:
+ limits:
+ cpu: 2
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 4Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 8Gi
+ requests:
+ cpu: 4
+ memory: 8Gi
queue-capacity: 500
adapters:
requestDb:
- auth: Basic YnBlbDptc28tZGItMTUwNyE=
+ auth: Basic YnBlbDpwYXNzd29yZDEk
endpoint: http://so-request-db-adapter.{{ include "common.namespace" . }}:8083
completemsoprocess:
endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}:8087/CompleteMsoProcess
db:
- auth: 26AFB797A6A57960D5D718491925C50F77CDC22AC394B3DBA09950D8FD1C0764
+ auth: 33293332AEC4930F655D8E2E8BB08937
password: wLg4sjrAFUS8rfVfdvTXeQ==
endpoint: http://so-request-db-adapter.{{ include "common.namespace" . }}:8083/services/RequestsDbAdapter
spring:
db:
endpoint: http://so-request-db-adapter.{{ include "common.namespace" . }}:8083/services/RequestsDbAdapter
po:
- auth: 757A94191D685FD2092AC1490730A4FC
- password: 3141634BF7E070AA289CF2892C986C0B
+ auth: 33293332AEC4930F655D8E2E8BB08937
+ password: B8EBDE0311F0AF355CF3F2FD505A8CAD
sdnc:
endpoint: http://mso-sdnc-adapter.{{ include "common.namespace" . }}:8086/adapters/SDNCAdapter
rest:
callbackRetryAttempts: '5'
catalog:
db:
- endpoint: http://so-catalog-db-adapter.{{ include "common.namespace" . }}:8083/ecomp/mso/catalog
+ endpoint: http://so-catalog-db-adapter.{{ include "common.namespace" . }}:8082/ecomp/mso/catalog
spring:
- endpoint: http://so-catalog-db-adapter.{{ include "common.namespace" . }}:8083
+ endpoint: http://so-catalog-db-adapter.{{ include "common.namespace" . }}:8082
db:
- auth: Basic YnBlbDptc28tZGItMTUwNyE=
+ auth: Basic YnBlbDpwYXNzd29yZDEk
default:
adapter:
namespace: http://org.onap.mso
username: mso_admin
password: '$2a$10$Fh9ffgPw2vnmsghsRD3ZauBL1aKXebigbq3BB1RPWtE62UDILsjke'
role: ACTUATOR
-
spring:
endpoint: http://so-catalog-db-adapter.{{ include "common.namespace" . }}:8082
db:
- auth: Basic cGFzc3dvcmQxJA==
+ auth: Basic YnBlbDpwYXNzd29yZDEk
adapters:
requestDb:
- auth: YnBlbDptc28tZGItMTUwNyE=
+ auth: Basic YnBlbDpwYXNzd29yZDEk
endpoint: http://so-request-db-adapter.{{ include "common.namespace" . }}:8083
config:
path: /src/main/resources/
sdna:
url: http://so-sdnc-adapter.{{ include "common.namespace" . }}:8086/
password: 4112B789E942B161228F7D5AFC654C0F
- bpelURL: http://so-bpmn-infra.{{ include "common.namespace" . }}:8082/
- bpelAuth: 786864AA53D0DCD881AED1154230C0C3058D58B9339D2EFB6193A0F0D82530E1
- camundaURL: http://so-bpmn-infra.{{ include "common.namespace" . }}:8082/
- camundaAuth: 5119D1AF37F671FC01FFAD2151D93EFB2BBB503E879FD07104D024EDDF118FD1
+ camundaURL: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/
+ camundaAuth: 1D9003AB8BAFFA0D2104B67FA89040AD70B5B495B2A5DF931DE236484EBC1681
async:
core-pool-size: 50
max-pool-size: 50
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vfc/db:latest
+image: onap/vfc/db:1.1.0-STAGING-latest
pullPolicy: Always
# flag to enable debugging - application support required
# application image
repository: nexus3.onap.org:10001
-image: onap/vid:3.0.0
+image: onap/vid:3.0-STAGING-latest
pullPolicy: Always
# mariadb image for initializing