+++ /dev/null
-#################################################################
-# Global configuration overrides.
-#
-# These overrides will affect all helm charts (ie. applications)
-# that are listed below and are 'enabled'.
-#################################################################
-global:
- # Change to an unused port prefix range to prevent port conflicts
- # with other instances running within the same k8s cluster
- nodePortPrefix: 302
-
- # image repositories
- repository: nexus3.onap.org:10001
- repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
- # readiness check
- readinessRepository: oomk8s
- # logging agent
- loggingRepository: docker.elastic.co
-
- # image pull policy
- pullPolicy: Always
-
- # default mount path root directory referenced
- # by persistent volumes and log files
- persistence:
- mountPath: /dockerdata-nfs
-
- # flag to enable debugging - application support required
- debugEnabled: false
-
-
-#################################################################
-# Enable/disable and configure helm charts (ie. applications)
-# to customize the ONAP deployment.
-#################################################################
-aaf:
- enabled: true
-aai:
- enabled: true
-appc:
- enabled: true
-clamp:
- enabled: true
-cli:
- enabled: true
-consul: # Consul Health Check Monitoring
- enabled: true
-dcaegen2:
- enabled: true
-esr:
- enabled: true
-log: # ONAP Logging ElasticStack
- enabled: true
-message-router:
- enabled: true
-mock:
- enabled: true
-msb:
- enabled: true
-multicloud:
- enabled: true
-policy:
- enabled: true
-portal:
- enabled: true
-robot: # Robot Health Check
- enabled: true
-sdc:
- enabled: true
-sdnc:
- enabled: true
-so: # Service Orchestrator
- enabled: true
-
- replicaCount: 1
-
- liveness:
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
- # so server configuration
- config:
- # message router configuration
- dmaapTopic: "AUTO"
- # openstack configuration
- openStackUserName: "vnf_user"
- openStackRegion: "RegionOne"
- openStackKeyStoneUrl: "http://1.2.3.4:5000"
- openStackServiceTenantName: "service"
- openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
-
- # configure embedded mariadb
- mariadb:
- config:
- mariadbRootPassword: password
-uui:
- enabled: true
-vfc:
- enabled: true
-vid:
- enabled: true
-vnfsdk:
- enabled: true
.. table:: OOM Software Requirements
- ============== ========== ===== ======= ========
- Release Kubernetes Helm kubectl Docker
- ============== ========== ===== ======= ========
- amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
- beijing 1.8.10 2.8.2 1.8.10 17.03.x
- casablanca/master 1.8.10 2.9.1 1.8.10 17.03.x
- ============== ========== ===== ======= ========
+ ============== =========== ===== ======== ========
+ Release Kubernetes Helm kubectl Docker
+ ============== =========== ===== ======== ========
+ amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
+ beijing 1.8.10 2.8.2 1.8.10 17.03.x
+ casablanca 1.11.2 2.9.1 1.11.2 17.03.x
+ ============== =========== ===== ======== ========
Minimum Hardware Configuration
==============================
-The minimum hardware requirements are provided below. Note that although ONAP
-may operate on a single node as described production deployments will need at
-least three if not six nodes to ensure there is no single point of failure.
+The hardware requirements are provided below. Note that this is for a
+full ONAP deployment (all components). Customizing ONAP to deploy only
+components that are needed will drastically reduce the requirements.
.. table:: OOM Hardware Requirements
===== ===== ====== ====================
RAM HD vCores Ports
===== ===== ====== ====================
- 128GB 160GB 32 0.0.0.0/0 (all open)
+ 224GB 160GB 112 0.0.0.0/0 (all open)
===== ===== ====== ====================
.. note::
- Kubernetes supports a maximum of 110 pods per node which forces one to use at
- least two nodes to deploy all of ONAP although at least three are recommended
- (for example 4x32GB - 8 vCores each). Subsets of ONAP may still be deployed
- on a single node.
+ Kubernetes supports a maximum of 110 pods per node. The use of many small
+ nodes is preferred over a few larger nodes (for example 14x16GB - 8 vCores each).
+ Subsets of ONAP may still be deployed on a single node.
Cloud Installation
==================
**Step 1.** Clone the OOM repository from ONAP gerrit::
- > git clone -b beijing http://gerrit.onap.org/r/oom
+ > git clone -b casablanca http://gerrit.onap.org/r/oom
> cd oom/kubernetes
+**Step 2.** Install Helm Plugins required to deploy the ONAP Casablanca release::
+ sudo cp -R ~/oom/kubernetes/helm/plugins/ ~/.helm
-**Step 2.** Customize the onap/values.yaml file to suit your deployment. You
+**Step 3.** Customize the onap/values.yaml file to suit your deployment. You
may want to selectively enable or disable ONAP components by changing the
`enabled: true/false` flags as shown below:
-.. code-block:: yaml
-
- #################################################################
- # Global configuration overrides.
- #
- # These overrides will affect all helm charts (ie. applications)
- # that are listed below and are 'enabled'.
- #################################################################
- global:
- # Change to an unused port prefix range to prevent port conflicts
- # with other instances running within the same k8s cluster
- nodePortPrefix: 302
-
- # image repositories
- repository: nexus3.onap.org:10001
- repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
- # readiness check
- readinessRepository: oomk8s
- # logging agent
- loggingRepository: docker.elastic.co
-
- # image pull policy
- pullPolicy: Always
-
- # default mount path root directory referenced
- # by persistent volumes and log files
- persistence:
- mountPath: /dockerdata-nfs
-
- # flag to enable debugging - application support required
- debugEnabled: false
-
- #################################################################
- # Enable/disable and configure helm charts (ie. applications)
- # to customize the ONAP deployment.
- #################################################################
- aaf:
- enabled: true
- aai:
- enabled: true
- appc:
- enabled: true
- clamp:
- enabled: true
- cli:
- enabled: true
- consul: # Consul Health Check Monitoring
- enabled: true
- dcaegen2:
- enabled: true
- esr:
- enabled: true
- log:
- enabled: true
- message-router:
- enabled: true
- mock:
- enabled: true
- msb:
- enabled: true
- multicloud:
- enabled: true
- policy:
- enabled: true
- portal:
- enabled: true
- robot: # Robot Health Check
- enabled: true
- sdc:
- enabled: true
- sdnc:
- enabled: true
- so: # Service Orchestrator
- enabled: true
-
- replicaCount: 1
-
- liveness:
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
- # so server configuration
- config:
- # message router configuration
- dmaapTopic: "AUTO"
- # openstack configuration
- openStackUserName: "vnf_user"
- openStackRegion: "RegionOne"
- openStackKeyStoneUrl: "http://1.2.3.4:5000"
- openStackServiceTenantName: "service"
- openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
-
- # configure embedded mariadb
- mariadb:
- config:
- mariadbRootPassword: password
- uui:
- enabled: true
- vfc:
- enabled: true
- vid:
- enabled: true
- vnfsdk:
- enabled: true
+.. literalinclude:: onap-values.yaml
+ :language: yaml
.. note::
To generate openStackEncryptedPasswordHere :
**Step 5.** Build a local Helm repository (from the kubernetes directory)::
- > make all
+ > make all; make onap
**Step 6.** Display the charts that available to be deployed::
> helm search -l
- NAME VERSION DESCRIPTION
- local/appc 2.0.0 Application Controller
- local/clamp 2.0.0 ONAP Clamp
- local/common 2.0.0 Common templates for inclusion in other charts
- local/onap 2.0.0 Open Network Automation Platform (ONAP)
- local/robot 2.0.0 A helm Chart for kubernetes-ONAP Robot
- local/so 2.0.0 ONAP Service Orchestrator
+.. literalinclude:: helm-search.txt
.. note::
The setup of the Helm repository is a one time activity. If you make changes to your deployment charts or values be sure to use `make` to update your local Helm repository.
**Step 7.** Once the repo is setup, installation of ONAP can be done with a
single command::
- > helm install local/onap -n dev --namespace onap
+ > helm deploy dev local/onap --namespace onap
-.. note::
- The requirement for the use of the `onap` namespace will be lifted once the OOM team completes their Beijing deveivers.
Use the following to monitor your deployment and determine when ONAP is ready for use::
> kubectl get pods --all-namespaces -o=wide
+
+Undeploying onap can be done using the following command::
+ > helm undeploy dev --purge
+
+
+More examples of using the deploy and undeploy plugins can be found here: https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins
\ No newline at end of file
Select Flavor
-------------
Known issues exist if flavor is too small for Rancher. Please select a flavor
-with at least 4 vCPU and 8GB ram.
+with at least 4 vCPU and 8GB ram. A size of 8 vCPU and 16GB ram is recommended.
.. image:: Rancher-Select_Flavor.jpeg
* install nfs server
.. note::
- The Beijing release of OOM only supports Helm 2.8.2 not the 2.7.2 shown in
+ The Casablanca release of OOM only supports Helm 2.9.1 not the 2.7.2 shown in
the screen capture below. The supported versions of all the software components
are listed in the :ref:`cloud-setup-guide-label`.
The size of a Kubernetes host depends on the size of the ONAP deployment that
will be installed.
-As of the Beijing release a minimum of 3 x 32GB hosts will be needed to run a
-full ONAP deployment (all components).
+As of the Casablanca release a minimum 224GB will be needed to run a
+full ONAP deployment (all components). It is recommended that more hosts are used
+with fewer resources instead of only a few large hosts. For example 14 x 16GB hosts.
If a small subset of ONAP components are being deployed for testing purposes,
then a single 16GB or 32GB host should suffice.
To prepare your system for an installation of ONAP, you'll need to::
- > git clone -b beijing http://gerrit.onap.org/r/oom
+ > git clone -b casablanca http://gerrit.onap.org/r/oom
> cd oom/kubernetes
To deploy ONAP with this environment file, enter::
- > helm install local/onap -n beijing -f environments/onap-production.yaml
+ > helm deploy local/onap -n casablanca -f environments/onap-production.yaml
.. include:: environments_onap_demo.yaml
:code: yaml
10.12.6.155 portal.api.simpledemo.onap.org
10.12.6.155 vid.api.simpledemo.onap.org
10.12.6.155 sdc.api.fe.simpledemo.onap.org
+ 10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
+ 10.12.6.155 sdc.dcae.plugin.simpledemo.onap.org
10.12.6.155 portal-sdk.simpledemo.onap.org
10.12.6.155 policy.api.simpledemo.onap.org
10.12.6.155 aai.api.sparky.simpledemo.onap.org
10.12.6.155 cli.api.simpledemo.onap.org
10.12.6.155 msb.api.discovery.simpledemo.onap.org
+ 10.12.6.155 msb.api.simpledemo.onap.org
+ 10.12.6.155 clamp.api.simpledemo.onap.org
+ 10.12.6.155 so.api.simpledemo.onap.org
Ensure you've disabled any proxy settings the browser you are using to access
-the portal and then simply access the familiar URL:
-http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+the portal and then simply access now the new ssl-encrypted URL:
+https://portal.api.simpledemo.onap.org:30225/ONAPPORTAL/login.htm
+.. note::
+ Using the HTTPS based Portal URL the Browser needs to be configured to accept
+ unsecure credentials.
+ Additionally when opening an Application inside the Portal, the Browser
+ might block the content, which requires to disable the blocking and reloading
+ of the page
+
+.. note::
+ Besides the ONAP Portal the Components can deliver additional user interfaces,
+ please check the Component specific documentation.
.. note::
For example, to upgrade a container by changing configuration, specifically an
environment value::
- > helm upgrade beijing onap/so --version 2.0.1 --set enableDebug=true
+ > helm deploy casablanca onap/so --version 2.0.1 --set enableDebug=true
Issuing this command will result in the appropriate container being stopped by
Kubernetes and replaced with a new container with the new environment value.
To upgrade a component to a new version with a new configuration file enter::
- > helm upgrade beijing onap/so --version 2.0.2 -f environments/demo.yaml
+ > helm deploy casablanca onap/so --version 2.0.2 -f environments/demo.yaml
To fetch release history enter::
what will happen with a given command prior to actually deleting anything. For
example::
- > helm delete --dry-run beijing
+ > helm undeploy casablanca --dry-run
-will display the outcome of deleting the 'beijing' release from the deployment.
+will display the outcome of deleting the 'casablanca' release from the deployment.
To completely delete a release and remove it from the internal store enter::
- > helm delete --purge beijing
+ > helm undeploy casablanca --purge
One can also remove individual components from a deployment by changing the
ONAP configuration values. For example, to remove `so` from a running
deployment enter::
- > helm upgrade beijing osn/onap --set so.enabled=false
+ > helm undeploy casablanca-so --purge
will remove `so` as the configuration indicates it's no longer part of the
deployment. This might be useful if a one wanted to replace just `so` by
#!/bin/bash
DOCKER_VERSION=17.03
-KUBECTL_VERSION=1.8.10
+KUBECTL_VERSION=1.11.2
HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
#!/bin/bash
DOCKER_VERSION=17.03
-RANCHER_VERSION=1.6.18
-KUBECTL_VERSION=1.8.10
+RANCHER_VERSION=1.6.22
+KUBECTL_VERSION=1.11.2
HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
Release Notes
=============
+Version 3.0.0 Casablanca Release
+--------------------------------
+
+:Release Date: 2018-11-30
+
+Summary
+=======
+
+The focus of this release was on incremental improvements in the following areas:
+* Pluggable persistent storage with support for GlusterFS as the first storage class provisioner
+* CPU and Memory limits in Helm Charts to improve Pod placement based on resource availablity in Kubernetes Cluster
+* Support of Node Selectors for Pod placement
+* Common "shared" Helm Charts referencing common images
+ - mariadb-galera
+ - postgres
+ - cassandra
+ - mysql
+ - mongo
+* Integration of ARK Backup and Restore solution
+* Introduction of Helm deploy and undeploy plugins to better manage ONAP deployments
+
+
+**Security Notes**
+
+OOM code has been formally scanned during build time using NexusIQ and no Critical vulnerability was found.
+
+Quick Links:
+ - `OOM project page <https://wiki.onap.org/display/DW/ONAP+Operations+Manager+Project>`_
+
+ - `Passing Badge information for OOM <https://bestpractices.coreinfrastructure.org/en/projects/1631>`_
+
+
+**Known Issues**
+
+Problem: kubectl connections to pods (kubectl exec|logs) will fail after a while due to a known bug in Kubernetes (1.11.2)
+Workaround: Restart of the kubelet daemons on the k8s hosts
+Fix: Will be delivered in the next release via a new Kubernetes version (1.12)
+- `K8S Bug Report <https://github.com/kubernetes/kubernetes/issues/67659>`_
+- `OOM-1532 <https://jira.onap.org/browse/OOM-1532>`_
+- `OOM-1516 <https://jira.onap.org/browse/OOM-1516>`_
+- `OOM-1520 <https://jira.onap.org/browse/OOM-1520>`_
+
+
Version 2.0.0 Beijing Release
-----------------------------
.PHONY: $(EXCLUDES) $(HELM_CHARTS)
-all: $(COMMON_CHARTS_DIR) $(HELM_CHARTS)
+all: $(COMMON_CHARTS_DIR) $(HELM_CHARTS) plugins
$(COMMON_CHARTS):
@echo "\n[$@]"
@find . -type f -name '*.tgz' -delete
@rm -rf $(PACKAGE_DIR)/*
+# publish helm plugins via distrubtion directory
+plugins:
+ @cp -R helm $(PACKAGE_DIR)/
+
# start up a local helm repo to serve up helm chart packages
repo:
@mkdir -p $(PACKAGE_DIR)
cpu: 2
memory: 4Gi
requests:
- cpu: 1
- memory: 2Gi
+ cpu: 0.25
+ memory: 750Mi
large:
limits:
cpu: 4
cpu: 2
memory: 4Gi
requests:
- cpu: 1
+ cpu: 0.5
memory: 2Gi
large:
limits:
<constructor-arg name="graphDataService" ref="graphDataService" />
</bean>
- <bean id="aaiResourceService" class="org.onap.crud.service.AaiResourceService" init-method="startup" >
- <constructor-arg name="graphDataService" ref="graphDataService" />
- </bean>
-
</beans>
--- /dev/null
+# DB Edge Property files are copied here:
+edgePropsDir=/opt/app/crud-service/config/model
+
--- /dev/null
+{
+ "contains-other-v": "java.lang.String",
+ "delete-other-v": "java.lang.String",
+ "SVC-INFRA": "java.lang.String",
+ "prevent-delete": "java.lang.String"
+}
\ No newline at end of file
--- /dev/null
+# Schema Version Related Attributes
+schema.uri.base.path=/aai
+# Lists all of the versions in the schema
+schema.version.list=v9,v10,v11,v12,v13,v14
+# Specifies from which version should the depth parameter to default to zero
+schema.version.depth.start=v9
+# Specifies from which version should the related link be displayed in response payload
+schema.version.related.link.start=v10
+# Specifies from which version should the client see only the uri excluding host info
+# Before this version server base will also be included
+schema.version.app.root.start=v11
+# Specifies from which version should the namespace be changed
+schema.version.namespace.change.start=v12
+# Specifies from which version should the client start seeing the edge label in payload
+schema.version.edge.label.start=v12
+# Specifies the version that the application should default to
+schema.version.api.default=v14
+
+# Schema Location Related Attributes
+schema.configuration.location=NA
+schema.nodes.location=/opt/app/crud-api/bundleconfig/etc/onap/oxm
+schema.edges.location=/opt/app/crud-api/bundleconfig/etc/onap/dbedgerules
+++ /dev/null
-#\r
-# ============LICENSE_START=======================================================\r
-# org.onap.aai\r
-# ================================================================================\r
-# Copyright © 2017-2018 AT&T Intellectual Property. All rights reserved.\r
-# Copyright © 2017-2018 Amdocs\r
-# Modifications Copyright © 2018 Bell Canada\r
-# ================================================================================\r
-# Licensed under the Apache License, Version 2.0 (the "License");\r
-# you may not use this file except in compliance with the License.\r
-# You may obtain a copy of the License at\r
-#\r
-# http://www.apache.org/licenses/LICENSE-2.0\r
-#\r
-# Unless required by applicable law or agreed to in writing, software\r
-# distributed under the License is distributed on an "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-# See the License for the specific language governing permissions and\r
-# limitations under the License.\r
-# ============LICENSE_END=========================================================\r
-#\r
-\r
-# Properties for the SchemaLocationsBean\r
-\r
-# The AAI Schema jar will be unpacked to bundleconfig/etc\r
-schemaConfig=NA\r
-# OXM files named aai_oxm_v*.xml are unpacked here:\r
-nodeDir=/opt/app/crud-api/bundleconfig/etc/oxm\r
-# DB Edge Rules are unpacked here:\r
-edgeDir=/opt/app/crud-api/bundleconfig/etc/dbedgerules\r
-# DB Edge Property files are copied here:\r
-edgePropsDir=/opt/app/crud-service/config/model\r
- mountPath: /opt/app/crud-service/config/crud-api.properties
subPath: crud-api.properties
name: {{ include "common.fullname" . }}-config
- - mountPath: /opt/app/crud-service/config/schemaIngest.properties
- subPath: schemaIngest.properties
+ - mountPath: /opt/app/crud-service/config/schema-ingest.properties
+ subPath: schema-ingest.properties
+ name: {{ include "common.fullname" . }}-config
+ - mountPath: /opt/app/crud-service/config/edgeprops-ingest.properties
+ subPath: edgeprops-ingest.properties
name: {{ include "common.fullname" . }}-config
- mountPath: /opt/app/crud-service/config/model/
name: {{ include "common.fullname" . }}-model-config
items:
- key: crud-api.properties
path: crud-api.properties
- - key: schemaIngest.properties
- path: schemaIngest.properties
+ - key: schema-ingest.properties
+ path: schema-ingest.properties
+ - key: edgeprops-ingest.properties
+ path: edgeprops-ingest.properties
- key: crud-beans.xml
path: crud-beans.xml
- name: {{ include "common.fullname" . }}-logback-config
cpu: 2
memory: 4Gi
requests:
- cpu: 1
- memory: 2Gi
+ cpu: 0.25
+ memory: 750Mi
large:
limits:
cpu: 4
# application configuration
config:
elasticsearchHttpPort: 9200
- gerritBranch: master
+ gerritBranch: 3.0.0-ONAP
gerritProject: http://gerrit.onap.org/r/aai/test-config
portalUsername: aaiui
portalPassword: 1t2v1vfv1unz1vgz1t3b
cpu: 2
memory: 4Gi
requests:
- cpu: 2
- memory: 4Gi
+ cpu: 0.25
+ memory: 1Gi
large:
limits:
cpu: 4
# ============LICENSE_END=========================================================
#
-# Properties for the SchemaLocationsBean
-# The AAI Schema jar will be unpacked to bundleconfig/etc
-schemaConfig=NA
-# Files named aai_oxm_v*.xml are unpacked here:
-nodeDir=/opt/app/spike/bundleconfig/etc/oxm
-# DB Edge Rules are unpacked here:
-edgeDir=/opt/app/spike/bundleconfig/etc/dbedgerules
# DB Edge Property files are copied here:
-edgePropsDir=/opt/app/spike/config/model/edge_props
\ No newline at end of file
+edgePropsDir=/opt/app/spike/config/model/edge_props
--- /dev/null
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+
+#######################################
+# Schema Version Related Attributes
+#######################################
+
+schema.uri.base.path=/aai
+# Lists all of the versions in the schema
+schema.version.list=v8,v9,v10,v11,v12,v13,v14
+# Specifies from which version should the depth parameter to default to zero
+schema.version.depth.start=v9
+# Specifies from which version should the related link be displayed in response payload
+schema.version.related.link.start=v10
+# Specifies from which version should the client see only the uri excluding host info
+# Before this version server base will also be included
+schema.version.app.root.start=v11
+# Specifies from which version should the namespace be changed
+schema.version.namespace.change.start=v12
+# Specifies from which version should the client start seeing the edge label in payload
+schema.version.edge.label.start=v12
+# Specifies the version that the application should default to
+schema.version.api.default=v14
+
+#######################################
+# Schema Location Related Attributes
+#######################################
+
+schema.configuration.location=NA
+schema.nodes.location=/opt/app/spike/bundleconfig/etc/onap/oxm
+schema.edges.location=/opt/app/spike/bundleconfig/etc/onap/dbedgerules
- mountPath: /opt/app/spike/config/spike.properties
subPath: spike.properties
name: {{ include "common.fullname" . }}-config
- - mountPath: /opt/app/spike/config/schemaIngest.properties
- subPath: schemaIngest.properties
+ - mountPath: /opt/app/spike/config/schema-ingest.properties
+ subPath: schema-ingest.properties
+ name: {{ include "common.fullname" . }}-config
+ - mountPath: /opt/app/spike/config/edgeprops-ingest.properties
+ subPath: edgeprops-ingest.properties
name: {{ include "common.fullname" . }}-config
- mountPath: /opt/app/spike/config/model/edge_props
name: {{ include "common.fullname" . }}-edge-props-config
path: spike.properties
- key: spike-beans.xml
path: spike-beans.xml
- - key: schemaIngest.properties
- path: schemaIngest.properties
+ - key: schema-ingest.properties
+ path: schema-ingest.properties
+ - key: edgeprops-ingest.properties
+ path: edgeprops-ingest.properties
- key: logback.xml
path: logback.xml
- name: {{ include "common.fullname" . }}-edge-props-config
name: config
subPath: RestServer_config
resources:
- {{- if .Values.nodeSelector }}
{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
nodeSelector:
{{ toYaml .Values.nodeSelector | indent 10 }}
{{- end -}}
nodePortPrefix: 302
repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
persistence: {}
+flavor: small
#################################################################
# Application configuration defaults.
# Minimum memory for development is 2 CPU cores and 4GB memory
# Minimum memory for production is 4 CPU cores and 8GB memory
resources:
- limits:
- cpu: 1
- memory: 4Gi
- requests:
- cpu: 10m
- memory: 2.5Gi
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 2.5Gi
+ large:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 2.5Gi
+ unlimited: {}
readinessRepository: oomk8s
readinessImage: readiness-check:1.1.0
persistence: {}
+flavor: small
#################################################################
# Application configuration defaults.
# Minimum memory for development is 2 CPU cores and 4GB memory
# Minimum memory for production is 4 CPU cores and 8GB memory
resources:
- limits:
- cpu: 1
- memory: 2Gi
- requests:
- cpu: 10m
- memory: 750Mi
-
+ small:
+ limits:
+ cpu: 1
+ memory: 2Gi
+ requests:
+ cpu: 10m
+ memory: 750Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 2Gi
+ requests:
+ cpu: 10m
+ memory: 750Mi
+ unlimited: {}
readinessRepository: oomk8s
readinessImage: readiness-check:1.1.0
persistence: {}
+flavor: small
#################################################################
# Application configuration defaults.
# Minimum memory for development is 2 CPU cores and 4GB memory
# Minimum memory for production is 4 CPU cores and 8GB memory
resources:
- limits:
- cpu: 1
- memory: 1.3Gi
- requests:
- cpu: 10m
- memory: 750Mi
+ small:
+ limits:
+ cpu: 1
+ memory: 1.3Gi
+ requests:
+ cpu: 10m
+ memory: 750Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 1.3Gi
+ requests:
+ cpu: 10m
+ memory: 750Mi
+ unlimited: {}
repository: nexus3.onap.org:10001
image: mariadb:10.1.11
pullPolicy: Always
+flavor: small
#################################################################
# Application configuration defaults.
# Minimum memory for development is 2 CPU cores and 4GB memory
# Minimum memory for production is 4 CPU cores and 8GB memory
resources:
- limits:
- cpu: 1
- memory: 500Mi
- requests:
- cpu: 10m
- memory: 200Mi
+ small:
+ limits:
+ cpu: 1
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 200Mi
+ unlimited: {}
subChartsOnly:
enabled: true
+flavor: small
+
# application image
repository: nexus3.onap.org:10001
image: onap/clamp:3.0.3
# Minimum memory for development is 2 CPU cores and 4GB memory
# Minimum memory for production is 4 CPU cores and 8GB memory
resources:
- limits:
- cpu: 1
- memory: 1.2Gi
- requests:
- cpu: 10m
- memory: 800Mi
+ small:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ unlimited: {}
# Minimum memory for development is 2 CPU cores and 4GB memory
# Minimum memory for production is 4 CPU cores and 8GB memory
resources:
- limits:
- cpu: 2
- memory: 4Gi
- requests:
- cpu: 1
- memory: 2Gi
+ small:
+ limits:
+ cpu: 2
+ memory: 4Gi
+ requests:
+ cpu: 1
+ memory: 2Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 4Gi
+ requests:
+ cpu: 1
+ memory: 2Gi
+ unlimited: {}
# Name for mariadb-galera cluster - should be unique accross all projects or other clusters
nameOverride: mariadb-galera
# Use to override default setting in blueprints
componentImages:
config_binding_service: onap/org.onap.dcaegen2.platform.configbinding.app-app:2.2.3
- datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.0.4
+ datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.1.0
deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:3.0.3
holmes_rules: onap/holmes/rule-management:1.2.3
holmes_engine: onap/holmes/engine-management:1.2.2
requests:
cpu: 1000m
memory: 2Gi
- unlimited: {}
\ No newline at end of file
+ unlimited: {}
# application configuration
config:
# gerrit branch where the latest code is checked in
- gerritBranch: master
+ gerritBranch: 3.0.0-ONAP
# gerrit project where the latest code is checked in
gerritProject: http://gerrit.onap.org/r/dmaap/messagerouter/messageservice.git
# application configuration
config:
# gerrit branch where the latest code is checked in
- gerritBranch: master
+ gerritBranch: 3.0.0-ONAP
# gerrit project where the latest code is checked in
gerritProject: http://gerrit.onap.org/r/dmaap/messagerouter/messageservice.git
# default number of instances
# 30+ logs/sec will saturate a single node to 6+ vCores
-replicaCount: 5
+replicaCount: 3
nodeSelector: {}
requests:
cpu: 2
memory: 4Gi
- unlimited: {}
\ No newline at end of file
+ unlimited: {}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/multicloud/openstack-ocata:1.2.1
+image: onap/multicloud/openstack-ocata:1.2.2
pullPolicy: Always
#Istio sidecar injection policy
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/multicloud/openstack-pike:1.2.1
+image: onap/multicloud/openstack-pike:1.2.2
pullPolicy: Always
#Istio sidecar injection policy
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/multicloud/openstack-windriver:1.2.1
+image: onap/multicloud/openstack-windriver:1.2.2
pullPolicy: Always
#Istio sidecar injection policy
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/multicloud/framework:1.2.1
+image: onap/multicloud/framework:1.2.2
pullPolicy: Always
#Istio sidecar injection policy
--- /dev/null
+# NBI
+
+## Introduction
+
+NBI stands for NorthBound Interface. It brings to ONAP a set of API that can be
+used by external systems as BSS for example. These API are based on TMF API.
+
+Full description is on [ONAP Read the Doc](https://onap.readthedocs.io/en/latest/submodules/externalapi/nbi.git/docs/offeredapis/index.html).
+
+## Requirements
+
+NBI needs the following ONAP projects to work:
+
+- AAI
+- SO
+- SDC
+- MSB
enabled: false
log:
enabled: false
+ log-logstash:
+ replicaCount: 1
sniro-emulator:
enabled: false
oof:
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
robot:
enabled: true
config:
-# openStackEncryptedPasswordHere should match the encrypted string used in SO and APPC and overridden per environment
+ # openStackEncryptedPasswordHere should match the encrypted string used in SO and APPC and overridden per environment
openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
sdc:
enabled: true
internalPort: 8080
externalPort: 8080
#nodePort: 23
- # as of 20181022 port 23 is reserved for cmso
+ # as of 20181022 port 23 is reserved for cmso
# see https://wiki.onap.org/display/DW/OOM+NodePort+List
# Minimum memory for development is 2 CPU cores and 4GB memory
# Minimum memory for production is 4 CPU cores and 8GB memory
resources:
- limits:
- cpu: 1
- memory: 1.2Gi
- requests:
- cpu: 10m
- memory: 800Mi
+ small:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ large:
+ limits:
+ cpu: 1
+ memory: 1.2Gi
+ requests:
+ cpu: 10m
+ memory: 800Mi
+ unlimited: {}
commonConfigPrefix: onap-oof-has
image:
readiness: oomk8s/readiness-check:2.0.0
- optf_has: onap/optf-has:1.2.4
+ optf_has: onap/optf-has:1.2.5
filebeat: docker.elastic.co/beats/filebeat:5.5.0
pullPolicy: Always
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+server.host={{ .Values.config.sdncCtxBuilderHost }}
+basicauth.username={{ .Values.config.sdncCtxBuilderUsername }}
+basicauth.password={{ .Values.config.sdncCtxBuilderPassword }}
+server.port={{ .Values.config.ctxBuilderExternalPort }}
+server.protocol=http
+trust.store.path=/auth/tomcat_keystore
+key.store.path=/auth/aai-client-cert.p12
+key.store.password=70c87528c88dcd9f9c2558d30e817868
+key.store.type=PKCS12
+key.manager.factory.algorithm=SunX509
+security.protocol=TLS
+connection.timeout.ms=60000
+read.timeout.ms=60000
+base.uri=/sdnccontextbuilder/v1/service/context
name: {{ include "common.fullname" . }}-dynamic-policy
- mountPath: /logs/
name: {{ include "common.fullname" . }}-logs
+ resources:
+{{ include "common.resources" . | indent 10 }}
ports:
- containerPort: {{ .Values.service.internalPort }}
{{- if eq .Values.liveness.enabled true }}
small:
limits:
cpu: 2
- memory: 1200Mi
+ memory: 1600Mi
requests:
cpu: 1
- memory: 600Mi
+ memory: 800Mi
large:
limits:
cpu: 4
- memory: 2400Mi
+ memory: 3200Mi
requests:
cpu: 2
- memory: 1200Mi
+ memory: 1600Mi
unlimited: {}
basicAuth.username={{ .Values.config.networkDiscoveryUserId }}
basicAuth.password={{ .Values.config.networkDiscoveryPassword }}
-enricher.types = vserver, l3-network
-enricher.type.vserver.url = /enricher/v11/cloud-infrastructure/vservers/vserver/{0}?sot=!aai
-enricher.type.l3-network.url = /enricher/v11/network/l3-networks/l3-network/{0}?sot=!aai
-
-# Mapping from Enricher Attribute name to POMBA Attribute name in the format
-# <Enricher Attribute Name>:<Pomba Attribute Name>; and separated by semicolon ";"
-# for example,
-# vserser-id:id;
-# means Attribute name "vserver-id" from Enricher will be converted to "id" in POMBA.
-enricher.attributeNameMappingList=Id:id;id:id;vserver-id:id;name:name;locked:inMaintenance; \
- hostname:hostName;status:status;vm_state:vmState;vm-state:vmState;admin_state_up:adminState; \
- favor.disk:flavorDisk;flavor.ephemeral:flavorEphemoral;flavor.extra_specs.hw.cpu_model:flavorHwCpuModel; \
- flavor.extra_specs.hw.cpu_policy:flavorHwCpuPolicy;flavor.extra_specs.hw.mem_page_size:flavorHwMemPageSize; \
- flavor.original_name:flavorOriginalName;flavor.ram:flavorRam;flavor.swap:flavorSwag;flavorvcpus:flavorVcpus; \
- image.id:imageId;hostId:hostId;host:host;host_status:hostStatus;security_group.name:securityGroupName; \
- serverName:serverName;metadata.myservername:otherServerName;shared:sharedNetwork;subnets:subnets; \
- userId:userId;tenant_id:tenantId
+openstack.identity.url ={{ .Values.config.openstackIdentityUrl }}
+openstack.identity.user ={{ .Values.config.openstackUserId }}
+openstack.identity.password ={{ .Values.config.openstackPassword }}
+
+openstack.types = vserver, l3-network
+openstack.type.vserver.url = {{ .Values.config.openstackTypeVserverUrl }}
+openstack.type.l3-network.url = {{ .Values.config.openstackTypeL3NetworkUrl }}
+
+openstack.api.microversion = 2.42
+
name: {{ include "common.fullname" . }}-config\r
subPath: application.properties\r
readOnly: true\r
- - mountPath: /opt/app/config/auth/enricher-client-cert.p12\r
+ - mountPath: /opt/app/config/auth/client-cert-onap.p12\r
name: {{ include "common.fullname" . }}-auth-secret\r
- subPath: enricher-client-cert.p12\r
+ subPath: client-cert-onap.p12\r
readOnly: true\r
\r
resources:\r
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/network-discovery:1.4.2
+image: onap/network-discovery:latest
pullPolicy: Always
# flag to enable debugging - application support required
networkDiscoveryUserId: admin
networkDiscoveryPassword: OBF:1u2a1toa1w8v1tok1u30
+ # Basic Authorization credentials for Openstack Rest APIs
+ openstackIdentityUrl: http://10.69.36.11:5000/v3/auth/tokens
+ openstackUserId: admin
+ openstackPassword: OBF:1w951ugg1vun1uha1w8l
+
+ # Openstack Rest API URLs:
+ openstackTypeVserverUrl: http://10.69.36.11:8774/v2.1/servers/{0}
+ openstackTypeL3NetworkUrl: http://10.69.36.11:9696/v2.0/networks/{0}
+
# default number of instances
replicaCount: 1
#Services may use any combination of ports depending on the 'type' of
#service being defined.
- type: ClusterIP
- externalPort: 9531
+ type: NodePort
+ name: pomba-networkdiscovery
+ externalPort: 8080
internalPort: 8080
+ nodePort: 99
# nodePort: <replace with unused node port suffix eg. 23>
# optional port name override - default can be defined in service.yaml
#portName: http
requests:
cpu: 20m
memory: 800Mi
- unlimited: {}
\ No newline at end of file
+ unlimited: {}
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP POMBA SDNC Context Builder
+name: pomba-sdncctxbuilder
+version: 3.0.0
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~3.0.0
+ repository: '@local'
--- /dev/null
+# Copyright © 2019 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+camel.springboot.xmlRoutes = file:config/dynamic/routes/*.route
+service.xml.beans = config/dynamic/conf/*.xml
+
+server.contextPath=/sdnccontextbuilder/v1
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-spare-threads=25
+
+# Basic Authorization credentials for SDNC Context Builder REST Service
+sdncCtxBuilder.userId={{ .Values.config.sdncCtxBuilderUserId }}
+sdncCtxBuilder.password={{ .Values.config.sdncCtxBuilderPassword }}
+
+# AAI REST Client Configuration
+aai.serviceName={{ .Values.config.aaiServiceName }}.{{.Release.Namespace}}
+aai.servicePort={{ .Values.config.aaiPort }}
+aai.username={{ .Values.config.aaiUsername }}
+aai.password={{ .Values.config.aaiPassword }}
+aai.httpProtocol={{ .Values.config.aaiHttpProtocol }}
+aai.authentication={{ .Values.config.aaiAuthentication }}
+aai.trustStorePath={{ .Values.config.aaiTrustStorePath }}
+aai.keyStorePath={{ .Values.config.aaiKeyStorePath }}
+aai.keyStorePassword={{ .Values.config.aaiKeyStorePassword }}
+aai.connectionTimeout={{ .Values.config.aaiConnectionTimeout }}
+aai.readTimeout={{ .Values.config.aaiReadTimeout }}
+
+# HTTP Basic Authorization credentials for AAI Rest Service API
+aai.http.userId={{ .Values.config.aaiHttpUserId }}
+aai.http.password={{ .Values.config.aaiHttpPassword }}
+
+aai.searchNodeQuery=/aai/v11/search/nodes-query?search-node-type=service-instance&filter=service-instance-id:EQUALS:
+aai.customerQuery=/aai/v11/business/customers/customer/
+aai.serviceInstancePath=/aai/v11/business/customers/customer/{0}/service-subscriptions/service-subscription/{1}/service-instances/service-instance/{2}
+
+# SDNC REST Client Configuration
+sdnc.serviceName={{ .Values.config.sdncServiceName }}.{{.Release.Namespace}}
+sdnc.servicePort={{ .Values.config.sdncPort }}
+sdnc.user={{ .Values.config.sdncUsername }}
+sdnc.password={{ .Values.config.sdncPassword }}
+sdnc.httpProtocol={{ .Values.config.sdncHttpProtocol }}
+sdnc.connectionTimeout={{ .Values.config.sdncConnectionTimeout }}
+sdnc.readTimeout={{ .Values.config.sdncReadTimeout }}
+sdnc.genericResourcePath=/restconf/config/GENERIC-RESOURCE-API:services/service/{0}
+sdnc.vnfPath=/restconf/config/VNF-API:vnfs/vnf-list/{0}
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
--- /dev/null
+<configuration scan="true" scanPeriod="10 seconds" debug="false">
+ <jmxConfigurator />
+ <property name="logDirectory" value="/var/log/onap/pomba-aaictxbuilder" />
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <!-- filter class="ch.qos.logback.classic.filter.LevelFilter"> <level>ERROR</level>
+ <onMatch>ACCEPT</onMatch> <onMismatch>DENY</onMismatch> </filter -->
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+ </pattern>
+ </encoder>
+ </appender>
+
+ <appender name="ERROR"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <file>${logDirectory}/error.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%date{"yyyy-MM-dd'T'HH:mm:ss,SSSXXX", UTC}|%X{RequestId}|%.20thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDescription}|%msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/error.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+
+ <appender name="DEBUG"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/debug.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%date{"yyyy-MM-dd'T'HH:mm:ss,SSSXXX",UTC}|%X{RequestId}|%.20thread|%.-5level|%logger{36}|%msg%n</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/debug.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>10MB</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>5</maxHistory>
+ </rollingPolicy>
+ </appender>
+
+ <appender name="AUDIT"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/audit.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/audit.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="AUDIT" />
+ </appender>
+
+ <appender name="METRIC"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/metric.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+ %msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/metric.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="METRIC" />
+ </appender>
+
+ <!-- SECURITY related loggers -->
+ <appender name="SECURITY"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/security.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/security.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="SECURITY" />
+ </appender>
+
+ <!-- CLDS related loggers -->
+ <logger name="org.onap.pomba.clds" level="INFO" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger name="com.att.eelf.error" level="OFF" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+ <!-- EELF related loggers -->
+ <logger name="com.att.eelf.audit" level="INFO" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="DEBUG" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger name="com.att.eelf.security" level="DEBUG" additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="WARN" />
+ <logger name="org.springframework.beans" level="WARN" />
+ <logger name="org.springframework.web" level="WARN" />
+ <logger name="com.blog.spring.jms" level="WARN" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="net.sf" level="WARN" />
+ <logger name="org.apache.commons.httpclient" level="WARN" />
+ <logger name="org.apache.commons" level="WARN" />
+ <logger name="org.apache.coyote" level="WARN" />
+ <logger name="org.apache.jasper" level="WARN" />
+
+ <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging.
+ May aid in troubleshooting) -->
+ <logger name="org.apache.camel" level="WARN" />
+ <logger name="org.apache.cxf" level="WARN" />
+ <logger name="org.apache.camel.processor.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.service" level="WARN" />
+ <logger name="org.restlet" level="DEBUG" />
+ <logger name="org.apache.camel.component.restlet" level="DEBUG" />
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="INFO" />
+ <logger name="ch.qos.logback.core" level="INFO" />
+
+ <!-- logback jms appenders & loggers definition starts here -->
+ <!-- logback jms appenders & loggers definition starts here -->
+ <appender name="auditLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Audit.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Audit.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <appender name="perfLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Perform.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Perform.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <logger name="AuditRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="AuditRecord_DirectCall" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="PerfTrackerRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="perfLogs" />
+ </logger>
+ <!-- logback jms appenders & loggers definition ends here -->
+
+ <root level="WARN">
+ <appender-ref ref="DEBUG" />
+ <appender-ref ref="STDOUT" />
+ </root>
+
+</configuration>
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - mountPath: /opt/app/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application.properties
+ readOnly: true
+
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # Filebeat sidecar container
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ - name: {{ include "common.fullname" . }}-log-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-pomba-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/pomba-sdnc-context-builder:1.4.0-SNAPSHOT-latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ # AAI Rest Client Connection
+ aaiServiceName: aai
+ aaiPort: 8443
+ aaiUsername: AAI
+ aaiPassword: OBF:1gfr1ev31gg7
+ aaiHttpProtocol: https
+ aaiAuthentication: basic_auth
+ aaiTrustStorePath: n/a
+ aaiKeyStorePath: n/a
+ aaiKeyStorePassword: n/a
+ aaiConnectionTimeout: 5000
+ aaiReadTimeout: 1000
+ # HTTP Basic Authorization credentials for Rest Service API
+ aaiHttpUserId: admin
+ aaiHttpPassword: OBF:1u2a1toa1w8v1tok1u30
+ sdncCtxBuilderUserId: admin
+ sdncCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30
+
+ # SDNC Rest Client Connection
+ sdncServiceName: sdnc
+ sdncPort: 8443
+ sdncUsername: SDNC
+ sdncPassword: OBF:1gfr1ev31gg7
+ sdncHttpProtocol: https
+ sdncConnectionTimeout: 5000
+ sdncReadTimeout: 1000
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: <service-name-override>
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ externalPort: 9530
+ internalPort: 8080
+# nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 800Mi
+ requests:
+ cpu: 100m
+ memory: 400Mi
+ large:
+ limits:
+ cpu: 2
+ memory: 1600Mi
+ requests:
+ cpu: 200m
+ memory: 800Mi
+ unlimited: {}
\ No newline at end of file
-/*\r
-# Copyright © 2018 Amdocs, Bell Canada, AT&T\r
-#\r
-# Licensed under the Apache License, Version 2.0 (the "License");\r
-# you may not use this file except in compliance with the License.\r
-# You may obtain a copy of the License at\r
-#\r
-# http://www.apache.org/licenses/LICENSE-2.0\r
-#\r
-# Unless required by applicable law or agreed to in writing, software\r
-# distributed under the License is distributed on an "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-# See the License for the specific language governing permissions and\r
-# limitations under the License.\r
-\r
-*/\r
-\r
-USE portal;\r
-/*\r
-Any updates required by OOM to the portaldb are made here.\r
-1. split up SDC-FE and SDC-BE. Originally both FE and BE point to the same IP\r
-while the OOM K8s version has these service split up.\r
-*/\r
--- app_url is the FE, app_rest_endpoint is the BE\r
---portal-sdk => TODO: doesn't open a node port yet\r
-update fn_app set app_url = 'http://{{.Values.config.portalSdkHostName}}:{{.Values.config.portalSdkPort}}/ONAPPORTALSDK/welcome.htm', app_rest_endpoint = 'http://portal-sdk:8080/ONAPPORTALSDK/api/v3' where app_name = 'xDemo App';\r
---dmaap-bc => the dmaap-bc doesn't open a node port..\r
-update fn_app set app_url = 'http://{{.Values.config.dmaapBcHostName}}:{{.Values.config.dmaapBcPort}}/ECOMPDBCAPP/dbc#/dmaap', app_rest_endpoint = 'http://dmaap-bc:8989/ECOMPDBCAPP/api/v2' where app_name = 'DMaaP Bus Ctrl';\r
---sdc-be => 8443:30204, 8080:30205\r
---sdc-fe => 8181:30206, 9443:30207\r
-update fn_app set app_url = 'http://{{.Values.config.sdcFeHostName}}:{{.Values.config.sdcFePort}}/sdc1/portal', app_rest_endpoint = 'http://sdc-be:8080/api/v3' where app_name = 'SDC';\r
---pap => 8443:30219\r
-update fn_app set app_url = 'https://{{.Values.config.papHostName}}:{{.Values.config.papPort}}/onap/policy', app_rest_endpoint = 'https://pap:8443/onap/api/v3' where app_name = 'Policy';\r
---vid => 8080:30200\r
-update fn_app set app_url = 'https://{{.Values.config.vidHostName}}:{{.Values.config.vidPort}}/vid/welcome.htm', app_rest_endpoint = 'https://vid:8443/vid/api/v3' where app_name = 'Virtual Infrastructure Deployment';\r
---sparky => TODO: sparky doesn't open a node port yet\r
-update fn_app set app_url = 'http://{{.Values.config.aaiSparkyHostName}}:{{.Values.config.aaiSparkyPort}}/services/aai/webapp/index.html#/viewInspect', app_rest_endpoint = 'http://aai-sparky-be.{{.Release.Namespace}}:9517/api/v2' where app_name = 'A&AI UI';\r
---cli => 8080:30260\r
-update fn_app set app_url = 'http://{{.Values.config.cliHostName}}:{{.Values.config.cliPort}}/', app_type = 1 where app_name = 'CLI';\r
---msb-iag => 80:30280\r
-update fn_app set app_url = 'http://{{.Values.config.msbHostName}}:{{.Values.config.msbPort}}/iui/microservices/default.html' where app_name = 'MSB';\r
-\r
-\r
-/*\r
-Additionally, some more update statments; these should be refactored to another SQL file in future releases \r
-*/\r
-\r
--- portal\r
-update fn_app set auth_central = 'Y' , auth_namespace = 'org.onap.portal' where app_id = 1;\r
--- portal-sdk\r
-update fn_app set app_username='Default', app_password='2VxipM8Z3SETg32m3Gp0FvKS6zZ2uCbCw46WDyK6T5E=', ueb_key='ueb_key' where app_id = 2;\r
--- SDC\r
-update fn_app set app_username='sdc', app_password='j85yNhyIs7zKYbR1VlwEfNhS6b7Om4l0Gx5O8931sCI=', ueb_key='ueb_key' where app_id = 4;\r
--- policy\r
-update fn_app set app_username='Default', app_password='2VxipM8Z3SETg32m3Gp0FvKS6zZ2uCbCw46WDyK6T5E=', ueb_key='ueb_key_5', auth_central = 'Y' , auth_namespace = 'org.onap.policy' where app_id = 5;\r
--- vid\r
-update fn_app set app_username='Default', app_password='2VxipM8Z3SETg32m3Gp0FvKS6zZ2uCbCw46WDyK6T5E=', ueb_key='2Re7Pvdkgw5aeAUD', auth_central = 'Y' , auth_namespace = 'org.onap.vid' where app_id = 6;\r
--- aai sparky\r
-update fn_app set app_username='aaiui', app_password='4LK69amiIFtuzcl6Gsv97Tt7MLhzo03aoOx7dTvdjKQ=', ueb_key='ueb_key' where app_id = 7;\r
-\r
-\r
-\r
+/*
+# Copyright © 2018 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*/
+
+USE portal;
+/*
+Any updates required by OOM to the portaldb are made here.
+1. split up SDC-FE and SDC-BE. Originally both FE and BE point to the same IP
+while the OOM K8s version has these service split up.
+*/
+-- app_url is the FE, app_rest_endpoint is the BE
+--portal-sdk => TODO: doesn't open a node port yet
+update fn_app set app_url = 'http://{{.Values.config.portalSdkHostName}}:{{.Values.config.portalSdkPort}}/ONAPPORTALSDK/welcome.htm', app_rest_endpoint = 'http://portal-sdk:8080/ONAPPORTALSDK/api/v3' where app_name = 'xDemo App';
+--dmaap-bc => the dmaap-bc doesn't open a node port..
+update fn_app set app_url = 'http://{{.Values.config.dmaapBcHostName}}:{{.Values.config.dmaapBcPort}}/ECOMPDBCAPP/dbc#/dmaap', app_rest_endpoint = 'http://dmaap-bc:8989/ECOMPDBCAPP/api/v2' where app_name = 'DMaaP Bus Ctrl';
+--sdc-be => 8443:30204, 8080:30205
+--sdc-fe => 8181:30206, 9443:30207
+update fn_app set app_url = 'http://{{.Values.config.sdcFeHostName}}:{{.Values.config.sdcFePort}}/sdc1/portal', app_rest_endpoint = 'http://sdc-be:8080/api/v3' where app_name = 'SDC';
+--pap => 8443:30219
+update fn_app set app_url = 'https://{{.Values.config.papHostName}}:{{.Values.config.papPort}}/onap/policy', app_rest_endpoint = 'https://pap:8443/onap/api/v3' where app_name = 'Policy';
+--vid => 8080:30200
+update fn_app set app_url = 'https://{{.Values.config.vidHostName}}:{{.Values.config.vidPort}}/vid/welcome.htm', app_rest_endpoint = 'https://vid:8443/vid/api/v3' where app_name = 'Virtual Infrastructure Deployment';
+--sparky => TODO: sparky doesn't open a node port yet
+update fn_app set app_url = 'http://{{.Values.config.aaiSparkyHostName}}:{{.Values.config.aaiSparkyPort}}/services/aai/webapp/index.html#/viewInspect', app_rest_endpoint = 'http://aai-sparky-be.{{.Release.Namespace}}:9517/api/v2' where app_name = 'A&AI UI';
+--cli => 8080:30260
+update fn_app set app_url = 'http://{{.Values.config.cliHostName}}:{{.Values.config.cliPort}}/', app_type = 1 where app_name = 'CLI';
+--msb-iag => 80:30280
+update fn_app set app_url = 'http://{{.Values.config.msbHostName}}:{{.Values.config.msbPort}}/iui/microservices/default.html' where app_name = 'MSB';
+
+
+/*
+Create SO-Monitoring App
+*/
+INSERT IGNORE INTO `fn_app` (`app_id`, `app_name`, `app_image_url`, `app_description`, `app_notes`, `app_url`, `app_alternate_url`, `app_rest_endpoint`, `ml_app_name`, `ml_app_admin_id`, `mots_id`, `app_password`, `open`, `enabled`, `thumbnail`, `app_username`, `ueb_key`, `ueb_secret`, `ueb_topic_name`, `app_type`,`auth_central`,`auth_namespace`) VALUES
+(10, 'SO-Monitoring', 'images/cache/portal-345993588_92550.png', NULL, NULL, 'http://{{.Values.config.soMonitoringHostName}}:{{.Values.soMonitoringPort}}', NULL, 'http://so-monitoring:30224', '', '', NULL, 'password', 'Y', 'Y', NULL, 'user', '', '', '', 1,'N','SO-Monitoring');
+
+/*
+Add SO Monitoring to Default apps
+*/
+INSERT IGNORE INTO `fn_pers_user_app_sel` VALUES (10,1,10,'S');
+
+/*
+Add Contact information for SO Monitoring
+*/
+INSERT IGNORE INTO `fn_app_contact_us` (app_id, contact_name, contact_email, url, active_yn, description) VALUES ( 10,"SO Team","so@lists.onap.org","https://wiki.onap.org/display/DW/Approved+Projects",NULL, "Service Orchestration (SO).");
+
+/*
+Additionally, some more update statments; these should be refactored to another SQL file in future releases
+*/
+
+-- portal
+update fn_app set auth_central = 'Y' , auth_namespace = 'org.onap.portal' where app_id = 1;
+-- portal-sdk
+update fn_app set app_username='Default', app_password='2VxipM8Z3SETg32m3Gp0FvKS6zZ2uCbCw46WDyK6T5E=', ueb_key='ueb_key' where app_id = 2;
+-- SDC
+update fn_app set app_username='sdc', app_password='j85yNhyIs7zKYbR1VlwEfNhS6b7Om4l0Gx5O8931sCI=', ueb_key='ueb_key' where app_id = 4;
+-- policy
+update fn_app set app_username='Default', app_password='2VxipM8Z3SETg32m3Gp0FvKS6zZ2uCbCw46WDyK6T5E=', ueb_key='ueb_key_5', auth_central = 'Y' , auth_namespace = 'org.onap.policy' where app_id = 5;
+-- vid
+update fn_app set app_username='Default', app_password='2VxipM8Z3SETg32m3Gp0FvKS6zZ2uCbCw46WDyK6T5E=', ueb_key='2Re7Pvdkgw5aeAUD', auth_central = 'Y' , auth_namespace = 'org.onap.vid' where app_id = 6;
+-- aai sparky
+update fn_app set app_username='aaiui', app_password='4LK69amiIFtuzcl6Gsv97Tt7MLhzo03aoOx7dTvdjKQ=', ueb_key='ueb_key' where app_id = 7;
\ No newline at end of file
msbPort: "30280"
# application's front end hostname. Must be resolvable on the client side environment
msbHostName: "msb.api.simpledemo.onap.org"
+ # SO Monitoring assignment for port 30224
+ soMonitoringPort: "30224"
+ # application's front end hostname. Must be resolvable on the client side environment
+ soMonitoringHostName: "http://so-monitoring"
+
# default number of instances
replicaCount: 1
FROM boxfuse/flyway:5.0.7-alpine
-ARG branch=master
+ARG branch=3.0.0-ONAP
ENV no_proxy "localhost,127.0.0.1,.cluster.local,$KUBERNETES_SERVICE_HOST"
# Setup Corporate proxy
ENV https_proxy ${HTTP_PROXY}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc-backend:1.3.4
-backendInitImage: onap/sdc-backend-init:1.3.4
+image: onap/sdc-backend:1.3.5
+backendInitImage: onap/sdc-backend-init:1.3.5
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc-cassandra:1.3.4
-cassandraInitImage: onap/sdc-cassandra-init:1.3.4
+image: onap/sdc-cassandra:1.3.5
+cassandraInitImage: onap/sdc-cassandra-init:1.3.5
pullPolicy: Always
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc-elasticsearch:1.3.4
-elasticInitImage: onap/sdc-init-elasticsearch:1.3.4
+image: onap/sdc-elasticsearch:1.3.5
+elasticInitImage: onap/sdc-init-elasticsearch:1.3.5
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc-frontend:1.3.4
+image: onap/sdc-frontend:1.3.5
pullPolicy: Always
config:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc-kibana:1.3.4
+image: onap/sdc-kibana:1.3.5
pullPolicy: Always
config:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc-onboard-backend:1.3.4
-onboardingInitImage: onap/sdc-onboard-cassandra-init:1.3.4
+image: onap/sdc-onboard-backend:1.3.5
+onboardingInitImage: onap/sdc-onboard-cassandra-init:1.3.5
pullPolicy: Always
# flag to enable debugging - application support required
consumerGroup: consumerGroup
consumerId: consumerId
topicListenerDelayInSeconds: 5
+bpelURL: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081
+msb-ip: msb-iag.{{ include "common.namespace" . }}
+msb-port: 80
mso:
msoKey: 07a7159d3bf51a0e53be7a8f89699be7
correlation:
endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}g:8087/services/rest/v1/volume-groups
vnf-async:
endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}:8087/services/VnfAsync
+ vfc:
+ rest:
+ endpoint: http://so-vfc-adapter.{{ include "common.namespace" . }}:8084/services/v1/vfcadapter
workflow:
message:
endpoint: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/mso/WorkflowMessage
uri: /aai/v14/network/vces/vce
vpn-binding:
uri: /aai/v14/network/vpn-bindings/vpn-binding
+ sp-partner:
+ uri: /aai/v14/business/sp-partners/sp-partner
+ device:
+ uri: /aai/v14/network/devices/device
v11:
customer:
uri: /aai/v11/business/customers/customer
config:
mariadbRootPassword: password
# gerrit branch where the latest heat code is checked in
- gerritBranch: master
+ gerritBranch: 3.0.0-ONAP
# gerrit project where the latest heat code is checked in
gerritProject: http://gerrit.onap.org/r/so/docker-config.git
# default number of instances
bpelurl: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/mso/SDNCAdapterCallbackService
generic-resource:
network-topology-operation:
+ create: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
activate: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
assign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
deactivate: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
+ delete: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
unassign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
vf-module-topology-operation:
+ create: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
activate: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
assign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
changeassign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
rollback: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
unassign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
vnf-topology-operation:
+ create: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
activate: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
assign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
changeassign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
max-total: 20
validation-query: select 1
test-on-borrow: true
+ security:
+ usercredentials:
+ - username: bpel
+ password: '$2a$10$Fh9ffgPw2vnmsghsRD3ZauBL1aKXebigbq3BB1RPWtE62UDILsjke'
+ role: BPEL-Client
+ - username: mso_admin
+ password: '$2a$10$Fh9ffgPw2vnmsghsRD3ZauBL1aKXebigbq3BB1RPWtE62UDILsjke'
+ role: ACTUATOR
server:
port: {{ index .Values.containerPort }}
tomcat:
mso:
site-name: localSite
logPath: ./logs/vfc
+ msb-ip: msb-iag.{{ include "common.namespace" . }}
+ msb-port: 80
adapters:
requestDb:
endpoint: https://so-request-db-adapter.{{ include "common.namespace" . }}:8083
Code Review / oom.git / commitdiff