--- /dev/null
+#!/bin/bash
+
+###
+# ============LICENSE_START=======================================================
+# SDNC
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Update by Copyright (C) 2020 highstreet technologies GmbH. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+# Install SDN-C platform components if not already installed and start container
+
+# List of used constants, that are provided during container initialization
+
+ODL_HOME=${ODL_HOME:-/opt/opendaylight/current}
+ODL_FEATURES_BOOT_FILE=$ODL_HOME/etc/org.apache.karaf.features.cfg
+#
+ODL_REMOVEIDMDB=${ODL_REMOVEIDMDB:-false}
+
+#ODL_CERT_DIR
+ODL_ADMIN_USERNAME=${ODL_ADMIN_USERNAME:-admin}
+if $ODL_REMOVEIDMDB ; then
+ echo "Remove odl idmdb"
+ rm $ODL_HOME/data/idmlight.db.mv.db
+ ODL_ADMIN_PASSWORD=${ODL_ADMIN_PASSWORD:-admin}
+else
+ ODL_ADMIN_PASSWORD=${ODL_ADMIN_PASSWORD:-Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U}
+fi
+
+export ODL_ADMIN_PASSWORD ODL_ADMIN_USERNAME
+
+SDNC_HOME=${SDNC_HOME:-/opt/onap/sdnc}
+SDNC_BIN=${SDNC_BIN:-/opt/onap/sdnc/bin}
+CCSDK_HOME=${CCSDK_HOME:-/opt/onap/ccsdk}
+
+#- ODL Cluster
+ENABLE_ODL_CLUSTER=${ENABLE_ODL_CLUSTER:-false}
+#SDNC_REPLICAS
+
+#- ODL GEO cluster
+GEO_ENABLED=${GEO_ENABLED:-false}
+#IS_PRIMARY_CLUSTER
+#MY_ODL_CLUSTER
+#PEER_ODL_CLUSTER
+
+#- AAF
+SDNC_AAF_ENABLED=${SDNC_AAF_ENABLED:-false}
+
+#- SDN-R
+SDNRWT=${SDNRWT:-false}
+SDNRWT_BOOTFEATURES=${SDNRWT_BOOTFEATURES:-sdnr-wt-feature-aggregator}
+SDNRDM=${SDNRDM:-false}
+# Add devicemanager base and specific repositories
+SDNRDM_BASE_REPO=${SDNRDM_BASE_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-feature-aggregator-devicemanager-base/$CCSDKFEATUREVERSION/xml/features}
+SDNRDM_ONF_REPO=${SDNRDM_ONF_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-onf-feature/$CCSDKFEATUREVERSION/xml/features}
+SDNRDM_ORAN_REPO=${SDNRDM_ORAN_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-oran-feature/$CCSDKFEATUREVERSION/xml/features}
+SDNRDM_GRAN_REPO=${SDNRDM_GRAN_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-gran-feature/$CCSDKFEATUREVERSION/xml/features}
+# Add devicemanager features
+SDNRDM_SDM_LIST=${SDNRDM_SDM_LIST:-sdnr-wt-devicemanager-onf-feature, sdnr-wt-devicemanager-oran-feature, sdnr-wt-devicemanager-gran-feature}
+SDNRDM_BOOTFEATURES=${SDNRDM_BOOTFEATURES:-sdnr-wt-feature-aggregator-devicemanager-base, ${SDNRDM_SDM_LIST}}
+SDNRINIT=${SDNRINIT:-false}
+SDNRONLY=${SDNRONLY:-false}
+SDNRDBURL=${SDNRDBURL:-http://sdnrdb:9200}
+#SDNRDBUSERNAME
+#SDNRDBPASSWORD
+#SDNRDBPARAMETER
+SDNRDBCOMMAND=${SDNRDBCOMMAND:--c init -db $SDNRDBURL -dbu $SDNRDBUSERNAME -dbp $SDNRDBPASSWORD $SDNRDBPARAMETER}
+
+SDNR_NORTHBOUND=${SDNR_NORTHBOUND:-false}
+SDNR_NORTHBOUND_BOOTFEATURES=${SDNR_NORTHBOUND_BOOTFEATURES:-sdnr-northbound-all}
+
+# Functions
+
+# Test if repository exists, like this mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-oran-feature/0.7.2/xml/features
+# $1 repository
+function isRepoExisting() {
+ REPO=$(echo $1 | sed -E "s#mvn:(.*)/xml/features\$#\1#")
+ OIFS="$IFS"
+ IFS='/' parts=($REPO)
+ IFS="$OIFS"
+ path="$ODL_HOME/system/"${parts[0]//./\/}"/"${parts[1]}"/"${parts[2]}
+ [ -d "$path" ]
+}
+
+# Add features repository to karaf featuresRepositories configuration
+# $1 repositories to be added
+function addRepository() {
+ CFG=$ODL_FEATURES_BOOT_FILE
+ ORIG=$CFG.orig
+ if isRepoExisting "$1" ; then
+ echo "Add repository: $1"
+ sed -i "\|featuresRepositories|s|$|, $1|" $CFG
+ else
+ echo "Repo does not exist: $1"
+ fi
+}
+
+# Append features to karaf boot feature configuration
+# $1 additional feature to be added
+# $2 repositories to be added (optional)
+function addToFeatureBoot() {
+ CFG=$ODL_FEATURES_BOOT_FILE
+ ORIG=$CFG.orig
+ if [ -n "$2" ] ; then
+ addRepository $2
+ fi
+ echo "Add boot feature: $1"
+ sed -i "\|featuresBoot *=|s|$|,$1|" $CFG
+}
+
+# Append features to karaf boot feature configuration
+# $1 search pattern
+# $2 replacement
+function replaceFeatureBoot() {
+ CFG=$ODL_FEATURES_BOOT_FILE
+ echo "Replace boot feature $1 with: $2"
+ sed -i "/featuresBoot/ s/$1/$2/g" $CFG
+}
+
+# Remove all sdnc specific features
+function cleanupFeatureBoot() {
+ echo "Remove northbound bootfeatures "
+ sed -i "/featuresBoot/ s/,ccsdk-sli-core-all.*$//g" $ODL_FEATURES_BOOT_FILE
+}
+
+function initialize_sdnr() {
+ echo "SDN-R Database Initialization"
+ INITCMD="$JAVA_HOME/bin/java -jar "
+ INITCMD+="$ODL_HOME/system/org/onap/ccsdk/features/sdnr/wt/sdnr-wt-data-provider-setup/$CCSDKFEATUREVERSION/sdnr-dmt.jar "
+ INITCMD+="$SDNRDBCOMMAND"
+ echo "Execute: $INITCMD"
+ n=0
+ until [ $n -ge 5 ] ; do
+ $INITCMD && break
+ n=$[$n+1]
+ sleep 15
+ done
+ return $?
+}
+
+function install_sdnrwt_features() {
+ # Repository setup provided via sdnc dockerfile
+ if $SDNRWT; then
+ addRepository $SDNRDM_BASE_REPO
+ addRepository $SDNRDM_ONF_REPO
+ addRepository $SDNRDM_ORAN_REPO
+ addRepository $SDNRDM_GRAN_REPO
+
+ if $SDNRONLY; then
+ cleanupFeatureBoot
+ fi
+ if $SDNRDM; then
+ addToFeatureBoot "$SDNRDM_BOOTFEATURES"
+ else
+ addToFeatureBoot "$SDNRWT_BOOTFEATURES"
+ fi
+ fi
+}
+
+
+function install_sdnr_northbound_features() {
+ # Repository setup provided via sdnc dockerfile
+ addToFeatureBoot "$SDNR_NORTHBOUND_BOOTFEATURES"
+}
+
+# Reconfigure ODL from default single node configuration to cluster
+
+function enable_odl_cluster(){
+ if [ -z $SDNC_REPLICAS ]; then
+ echo "SDNC_REPLICAS is not configured in Env field"
+ exit
+ fi
+
+ # ODL NETCONF setup
+ echo "Installing Opendaylight cluster features for mdsal and netconf"
+
+ #Be sure to remove feature odl-netconf-connector-all from list
+ replaceFeatureBoot "odl-netconf-connector-all,"
+ #Activate cluster
+ replaceFeatureBoot odl-netconf-topology odl-netconf-clustered-topology
+ replaceFeatureBoot odl-mdsal-all odl-mdsal-all,odl-mdsal-clustering
+ addToFeatureBoot odl-jolokia
+
+ # ODL Cluster or Geo cluster configuration
+
+ echo "Update cluster information statically"
+ fqdn=$(hostname -f)
+ echo "Get current fqdn ${fqdn}"
+
+ # Extract node index using first digit after "-"
+ # Example 2 from "sdnr-2.logo.ost.das.r32.com"
+ node_index=($(echo ${fqdn} | sed -r 's/.*-([0-9]).*/\1/g'))
+
+ if $GEO_ENABLED; then
+ echo "This is a Geo cluster"
+
+ if [ -z $IS_PRIMARY_CLUSTER ] || [ -z $MY_ODL_CLUSTER ] || [ -z $PEER_ODL_CLUSTER ]; then
+ echo "IS_PRIMARY_CLUSTER, MY_ODL_CLUSTER and PEER_ODL_CLUSTER must all be configured in Env field"
+ return
+ fi
+
+ member_offset=1
+ if $IS_PRIMARY_CLUSTER; then
+ PRIMARY_NODE=${MY_ODL_CLUSTER}
+ SECONDARY_NODE=${PEER_ODL_CLUSTER}
+ else
+ PRIMARY_NODE=${PEER_ODL_CLUSTER}
+ SECONDARY_NODE=${MY_ODL_CLUSTER}
+ member_offset=4
+ fi
+
+ node_list="${PRIMARY_NODE} ${SECONDARY_NODE}"
+ $SDNC_BIN/configure_geo_cluster.sh $((node_index+member_offset)) ${node_list}
+ else
+ echo "This is a local cluster"
+ for ((i=0;i<${SDNC_REPLICAS};i++)); do
+ #assemble node list by replaceing node-index in hostname with "i"
+ node_name=$(echo ${fqdn} | sed -r "s/-[0-9]/-$i/g")
+ node_list="${node_list} $node_name"
+ done
+ echo "Node index: $((node_index+1)) list: ${node_list[@]}"
+ $ODL_HOME/bin/configure_cluster.sh $((node_index+1)) ${node_list}
+ fi
+}
+
+# -----------------------
+# Main script starts here
+
+echo "Image path=${IMAGEPATH}"
+echo "Image names=${IMAGENAMES}"
+echo "Settings:"
+echo " USER=$(whoami)"
+echo " SDNC_BIN=$SDNC_BIN"
+echo " SDNC_HOME=$SDNC_HOME"
+echo " ODL_CERT_DIR=$ODL_CERT_DIR"
+echo " CCSDKFEATUREVERSION=$CCSDKFEATUREVERSION"
+echo " ENABLE_ODL_CLUSTER=$ENABLE_ODL_CLUSTER"
+echo " ODL_REMOVEIDMDB=$ODL_REMOVEIDMDB"
+echo " SDNC_REPLICAS=$SDNC_REPLICAS"
+echo " SDNRWT=$SDNRWT"
+echo " SDNRDM=$SDNRDM"
+echo " SDNRONLY=$SDNRONLY"
+echo " SDNRINIT=$SDNRINIT"
+echo " SDNRDBURL=$SDNRDBURL"
+echo " SDNRDBUSERNAME=$SDNRDBUSERNAME"
+echo " SDNRDBPASSWORD=$SDNRDBPASSWORD"
+echo " GEO_ENABLED=$GEO_ENABLED"
+echo " IS_PRIMARY_CLUSTER=$IS_PRIMARY_CLUSTER"
+echo " MY_ODL_CLUSTER=$MY_ODL_CLUSTER"
+echo " PEER_ODL_CLUSTER=$PEER_ODL_CLUSTER"
+echo " AAF_ENABLED=$SDNC_AAF_ENABLED"
+
+if $SDNC_AAF_ENABLED; then
+ export SDNC_AAF_STORE_DIR=/opt/app/osaaf/local
+ export SDNC_AAF_CONFIG_DIR=/opt/app/osaaf/local
+ export SDNC_KEYPASS=`cat /opt/app/osaaf/local/.pass`
+ export SDNC_KEYSTORE=org.onap.sdnc.p12
+ sed -i '/cadi_prop_files/d' $ODL_HOME/etc/system.properties
+ echo "cadi_prop_files=$SDNC_AAF_CONFIG_DIR/org.onap.sdnc.props" >> $ODL_HOME/etc/system.properties
+
+ sed -i '/org.ops4j.pax.web.ssl.keystore/d' $ODL_HOME/etc/custom.properties
+ sed -i '/org.ops4j.pax.web.ssl.password/d' $ODL_HOME/etc/custom.properties
+ sed -i '/org.ops4j.pax.web.ssl.keypassword/d' $ODL_HOME/etc/custom.properties
+ echo org.ops4j.pax.web.ssl.keystore=$SDNC_AAF_STORE_DIR/$SDNC_KEYSTORE >> $ODL_HOME/etc/custom.properties
+ echo org.ops4j.pax.web.ssl.password=$SDNC_KEYPASS >> $ODL_HOME/etc/custom.properties
+ echo org.ops4j.pax.web.ssl.keypassword=$SDNC_KEYPASS >> $ODL_HOME/etc/custom.properties
+fi
+
+if $SDNRINIT ; then
+ #One time intialization action
+ initialize_sdnr
+ init_result=$?
+ echo "Result of init script: $init_result"
+ if $SDNRWT ; then
+ echo "Proceed to initialize sdnr"
+ else
+ exit $init_result
+ fi
+fi
+
+if [ ! -f ${SDNC_HOME}/.installed ]
+then
+ echo "Installing SDN-C keyStore"
+ /bin/bash ${SDNC_HOME}/bin/addSdncKeyStore.sh
+
+ if $ENABLE_ODL_CLUSTER ; then enable_odl_cluster ; fi
+
+ if $SDNRWT ; then install_sdnrwt_features ; fi
+
+ if $SDNR_NORTHBOUND ; then install_sdnr_northbound_features ; fi
+
+ echo "Installed at `date`" > ${SDNC_HOME}/.installed
+fi
+
+# Odl configuration done
+ODL_FEATURES_BOOT=$(sed -n "/featuresBoot =/p" $ODL_FEATURES_BOOT_FILE)
+export ODL_FEATURES_BOOT
+
+if [ -z "$ODL_CERT_DIR" ] ; then
+ echo "No certs provided. Skip installation."
+else
+ echo "Start background cert installer"
+ nohup python ${SDNC_BIN}/installCerts.oom.py &
+fi
+
+echo "Startup opendaylight"
+echo $ODL_FEATURES_BOOT
+exec ${ODL_HOME}/bin/karaf server
Code Review / oom.git / commitdiff