Add DCAE Bootstrap support 47/42447/4
authorBorislavG <Borislav.Glozman@amdocs.com>
Thu, 12 Apr 2018 08:08:39 +0000 (11:08 +0300)
committerBorislavG <Borislav.Glozman@amdocs.com>
Sun, 22 Apr 2018 13:37:01 +0000 (13:37 +0000)
** Changes to add readiness checks for all dependencies,
   make copyright notices consistent.

This commit adds a job that is supposed to spin-up DCAE

Few problems:
  Bootstrap fails looking for consul service,
    which has Release.Name prefix. Release.Name will soon be removed
    everywhere. Meanwhile can run helm insall/upgrade providing parameter:
    --set dcaegen2.dcae-bootstrap.config.address.consul.host=<Release.Name>-consul-server
  backoffLimit: 0 in the job does not seem to work on my environment
    therefore left it in a comment
  There are many TODO, which need to be cleaned-out (by DCAE team)

Change-Id: If54440544cb9c8f4ac9aff59ac6752023fb3e670
Issue-ID: OOM-854
Signed-off-by: BorislavG <Borislav.Glozman@amdocs.com>
Signed-off-by: Jack Lucas <jflucas@research.att.com>
16 files changed:
kubernetes/dcaegen2/charts/dcae-bootstrap/.helmignore [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/Chart.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/requirements.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/k8s-plugin.json [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-config_binding_service-inputs.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-deployment_handler-inputs.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-holmes_engine-inputs.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-holmes_rules-input.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-inventory-inputs.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-tca-inputs.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-ves-inputs.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/templates/configmap.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/templates/job.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/templates/secret.yaml [new file with mode: 0644]
kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml [new file with mode: 0644]

diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/.helmignore b/kubernetes/dcaegen2/charts/dcae-bootstrap/.helmignore
new file mode 100644 (file)
index 0000000..f0c1319
--- /dev/null
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/Chart.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/Chart.yaml
new file mode 100644 (file)
index 0000000..61cb14c
--- /dev/null
@@ -0,0 +1,22 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP DCAE Bootstrap
+name: dcae-bootstrap
+version: 2.0.0
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/requirements.yaml
new file mode 100644 (file)
index 0000000..d031e2e
--- /dev/null
@@ -0,0 +1,22 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+dependencies:
+  - name: common
+    version: ~2.0.0
+    repository: '@local'
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/k8s-plugin.json b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/k8s-plugin.json
new file mode 100644 (file)
index 0000000..5d83ff8
--- /dev/null
@@ -0,0 +1,32 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+{
+  "namespace" : "{{ if .Values.dcae_ns }}{{ .Values.dcae_ns}}{{ else }}{{include "common.namespace" . }}{{ end}}",
+  "consul_dns_name" : "{{ .Values.config.address.consul.host }}.{{ include "common.namespace" . }}",
+  "image_pull_secrets" : ["{{ include "common.namespace" . }}-docker-registry-key"],
+  "filebeat":
+    {
+      "log_path": "/var/log/onap",
+      "data_path": "/usr/share/filebeat/data",
+      "config_path": "/usr/share/filebeat/filebeat.yml",
+      "config_subpath": "filebeat.yml",
+      "image" : "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}",
+      "config_map" : "dcae-filebeat-configmap"
+    }
+}
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-config_binding_service-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-config_binding_service-inputs.yaml
new file mode 100644 (file)
index 0000000..0ee60c7
--- /dev/null
@@ -0,0 +1,21 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#TODO would like to make this conditional, as with the other input templates
+# but having template expansion issues trying to do that
+cbs_image: {{ .Values.componentImages.config_binding_service }}
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-deployment_handler-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-deployment_handler-inputs.yaml
new file mode 100644 (file)
index 0000000..4143254
--- /dev/null
@@ -0,0 +1,27 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+{{ if .Values.componentImages.deployment_handler }}
+deployment_handler_image: {{ .Values.componentImages.deployment_handler }}
+{{ end }}
+application_config:
+  cloudify:
+    protocol: "http"
+  inventory:
+    protocol: "http"
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-holmes_engine-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-holmes_engine-inputs.yaml
new file mode 100644 (file)
index 0000000..6205f1e
--- /dev/null
@@ -0,0 +1,28 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+{
+{{ if .Values.componentImages.holmes_engine }}
+  "he_image" : "{{ .Values.componentImages.holmes_engine }}",
+{{ end }}
+  "msb_hostname": "{{ .Values.config.address.msb_discovery }}.{{include "common.namespace" . }}",
+  "dcae_CL_publish_url": "http://{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}:3904/events/unauthenticated.DCAE_CL_OUTPUT",
+  "ves_fault_publish_url": "http://{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}:3904/events/unauthenticated.SEC_FAULT_OUTPUT",
+  "pgaas_cluster_name" : "pgvm",
+  "database_name":"holmes"
+}
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-holmes_rules-input.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-holmes_rules-input.yaml
new file mode 100644 (file)
index 0000000..75dbbf9
--- /dev/null
@@ -0,0 +1,23 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+{
+  "msb_hostname": "{{ .Values.config.address.msb_discovery }}.{{include "common.namespace" . }}",
+  "pgaas_cluster_name" : "pgvm",
+  "database_name":"holmes"
+}
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-inventory-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-inventory-inputs.yaml
new file mode 100644 (file)
index 0000000..4e42b11
--- /dev/null
@@ -0,0 +1,30 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+sdc_config.address: '{{ .Values.config.address.sdc }}.{{include "common.namespace" . }}:8443'
+sdc_uri: 'https://{{ .Values.config.address.sdc }}.{{include "common.namespace" . }}:8443'
+sdc_user: "dcae"
+sdc_password: !!str Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
+sdc_environment_name: "AUTO"
+sdc_msg_bus_config.address: '{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}'
+postgres_user_inventory: "postgres"
+postgres_password_inventory: "onap123"
+service_change_handler_image: {{ .Values.componentImages.service_change_handler }}
+{{ if .Values.componentImages.inventory }}
+inventory_image: "{{ .Values.componentImages.inventory }}"
+{{ end }}
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml
new file mode 100644 (file)
index 0000000..8c8d83c
--- /dev/null
@@ -0,0 +1,54 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+{{ if .Values.componentImages.policy_handler }}
+policy_handler_image: {{ .Values.componentImages.policy_handler }}
+{{ end }}
+application_config:
+  policy_handler :
+    # parallelize the getConfig queries to policy-engine on each policy-update notification
+    thread_pool_size : 4
+
+    # parallelize requests to policy-engine and keep them alive
+    pool_connections : 20
+
+    # list of policyName prefixes (filters) that DCAE-Controller handles (=ignores any other policyName values)
+    scope_prefixes : ["DCAE.Config_"]
+
+    # retry to getConfig from policy-engine on policy-update notification
+    policy_retry_count : 5
+    policy_retry_sleep : 5
+
+    # policy-engine config
+    # These are the url of and the auth for the external system, namely the policy-engine (PDP).
+    # We obtain that info manually from PDP folks at the moment.
+    # In long run we should figure out a way of bringing that info into consul record
+    #    related to policy-engine itself.
+    policy_engine :
+        url : "http://{{ .Values.config.address.policy_pdp }}.{{include "common.namespace" . }}:8081"
+        path_pdp : "/pdp/"
+        path_api : "/pdp/api/"
+        headers :
+            Accept : "application/json"
+            "Content-Type" : "application/json"
+            ClientAuth : "cHl0aG9uOnRlc3Q="
+            Authorization : "Basic dGVzdHBkcDphbHBoYTEyMw=="
+            Environment : "TEST"
+        target_entity : "policy_engine"
+    # name of deployment-handler service in consul for policy-handler to direct the policy-updates to
+    deploy_handler : "deployment_handler"
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-tca-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-tca-inputs.yaml
new file mode 100644 (file)
index 0000000..7dc66f4
--- /dev/null
@@ -0,0 +1,24 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+{{ if .Values.componentImages.tca }}
+tca_image: {{ .Values.componentImages.tca }}
+{{ end }}
+dmaap_host: {{ .Values.config.address.message_router }}.{{include "common.namespace" . }}
+consul_host: {{ .Values.config.address.consul.host }}.{{include "common.namespace" . }}
+cbs_host: config-binding-service
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-ves-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-ves-inputs.yaml
new file mode 100644 (file)
index 0000000..5385d07
--- /dev/null
@@ -0,0 +1,26 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+{{ if .Values.componentImages.ves }}
+tag_version: {{ .Values.componentImages.ves }}
+{{ end }}
+external_port : "30280"
+ves_other_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_OTHER_OUTPUT/"
+ves_heartbeat_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_HEARTBEAT_OUTPUT/"
+ves_fault_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_FAULT_OUTPUT/"
+ves_measurement_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_MEASUREMENT_OUTPUT/"
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/configmap.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/configmap.yaml
new file mode 100644 (file)
index 0000000..2c01206
--- /dev/null
@@ -0,0 +1,34 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-dcae-config
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-dcae-inputs
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/inputs/*").AsConfig . | indent 2 }}
+
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/job.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/job.yaml
new file mode 100644 (file)
index 0000000..6229af4
--- /dev/null
@@ -0,0 +1,95 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  completions: 1
+{{/*  backoffLimit: 0*/}}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      restartPolicy: Never
+      initContainers:
+      - name: {{ include "common.name" . }}-readiness
+        image: {{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        command:
+          - /root/ready.py
+        args:
+          - --container-name
+          - dcae-cloudify-manager
+          - --container-name
+          - consul-server
+          - --container-name
+          - msb-discovery
+          - --container-name
+          - kube2msb
+          - "-t"
+          - "15"
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+            - mountPath: /inputs
+              name: {{ include "common.fullname" . }}-dcae-inputs
+            - mountPath: /dcae-configs
+              name: {{ include "common.fullname" . }}-dcae-config
+            - mountPath: /etc/localtime
+              name: localtime
+              readOnly: true
+          env:
+            - name: CMADDR
+              value: {{ .Values.config.address.cm }}
+            - name: CMPASS
+              valueFrom:
+                secretKeyRef:
+                  name: {{ include "common.name" . }}-cmpass
+                  key: password
+            - name: CONSUL
+              value: {{ .Values.config.address.consul.host }}:{{ .Values.config.address.consul.port }}
+      volumes:
+        - name: {{ include "common.fullname" . }}-dcae-inputs
+          configMap:
+            name: {{ include "common.fullname" . }}-dcae-inputs
+        - name: {{ include "common.fullname" . }}-dcae-config
+          configMap:
+            name: {{ include "common.fullname" . }}-dcae-config
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+      imagePullSecrets:
+        - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/secret.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/secret.yaml
new file mode 100644 (file)
index 0000000..a328ab2
--- /dev/null
@@ -0,0 +1,31 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.name" . }}-cmpass
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+type: Opaque
+data:
+  password: YWRtaW4=
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml
new file mode 100644 (file)
index 0000000..fc89c6c
--- /dev/null
@@ -0,0 +1,66 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiZGNhZUBkY2FlLm9uYXAub3JnIiwiYXV0aCI6IlpHOWphMlZ5T21SdlkydGxjZz09In19
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:1.1.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+
+config:
+  logstashServiceName: log-ls
+  logstashPort: 5044
+  # Addresses of ONAP components
+  address:
+    consul:
+      host: consul-server
+      port: 8500
+    cm: dcae-cloudify-manager
+    message_router: message-router
+    msb_discovery: msb-discovery
+    policy_pdp: pdp
+    sdc: sdc-be
+
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.1.5
+
+# DCAE component images to be deployed via Cloudify Manager
+# Use to override default setting in blueprints
+componentImages:
+  #TODO for further investigation: input template expansion issues if we comment this out
+  config_binding_service: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.configbinding:2.1.4
+#  deployment_handler: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.deployment-handler:2.1.1
+#  holmes_engine: nexus3.onap.org:10001//onap/holmes/engine-management:v1.0.0
+#  holmes_rules: nexus3.onap.org:10001/onap/holmes/rule-management:v1.0.0
+  inventory: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.inventory-api:3.0.1
+  policy_handler: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.policy-handler:2.4.1
+  service_change_handler: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.servicechange-handler:1.1.3
+#  tca: nexus3.onap.org:10001/onap/org.onap.dcaegen2.deployments.tca-cdap-container.tca-cdap-container:1.0.0
+#  ves: nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1-latest
+
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+dcae_ns: "dcae"
+