company: 'ATT'
id: 'jh245g'
timezone: 'America/New York'
- - name: 'Mike Elliott'
- email: 'mike.elliott@amdocs.com'
- company: 'Amdocs'
- id: 'melliott'
- timezone: 'Canada/Ontario'
+ - name: 'David Sauvageau'
+ email: 'david.sauvageau@bell.ca'
+ company: 'Bell'
+ id: 'david.sauvageau'
+ timezone: 'Canada/Montreal'
- name: 'Mandeep Khinda'
email: 'Mandeep.Khinda@amdocs.com'
company: 'Amdocs'
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_cm:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_cm:2.1.7
aaf_register_as: "aaf-cm.onap"
pullPolicy: Always
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_cass:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_cass:2.1.7
pullPolicy: Always
# application configuration
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_fs:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_fs:2.1.7
aaf_register_as: "aaf-fs.onap"
pullPolicy: Always
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_gui:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_gui:2.1.7
aaf_register_as: "aaf-gui.onap"
pullPolicy: Always
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_hello:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_hello:2.1.7
aaf_register_as: "aaf-hello.onap"
pullPolicy: Always
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_locate:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_locate:2.1.7
aaf_register_as: "aaf-locate.onap"
pullPolicy: Always
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_oauth:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_oauth:2.1.7
aaf_register_as: "aaf-oauth.onap"
pullPolicy: Always
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_service:2.1.7-SNAPSHOT
+image: onap/aaf/aaf_service:2.1.7
aaf_register_as: "aaf-service.onap"
pullPolicy: Always
readinessImage: readiness-check:2.0.0
ubuntuInitRepository: registry.hub.docker.com
ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
- configImage: onap/aaf/aaf_config:2.1.7-SNAPSHOT
+ configImage: onap/aaf/aaf_config:2.1.7
persistence:
enabled: true
# application image
repository: nexus3.onap.org:10001
-image: onap/aai-resources:1.3.1
+image: onap/aai-resources:1.3.3
pullPolicy: Always
restartPolicy: Always
flavor: small
args:
- --container-name
- aai
+ {{ if eq .Values.global.aafEnabled true }}
+ - --container-name
+ - aaf-locate
+ {{ end }}
env:
- name: NAMESPACE
valueFrom:
restartPolicy: Always
installSidecarSecurity: false
+ aafEnabled: true
fproxy:
name: forward-proxy
################################################################################
#
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements. See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
+# ============LICENSE_START=======================================================
+# ONAP : APPC
+# ================================================================================
+# Copyright (C) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
#
################################################################################
flavor: small
# application image
repository: nexus3.onap.org:10001
-image: onap/appc-image:1.4.1-SNAPSHOT-latest
+image: onap/appc-image:1.4.0
pullPolicy: Always
# flag to enable debugging - application support required
# application image
repository: nexus3.onap.org:10001
-image: onap/clamp-dashboard-kibana:3.0.1
+image: onap/clamp-dashboard-kibana:3.0.2
pullPolicy: Always
# flag to enable debugging - application support required
# application image
repository: nexus3.onap.org:10001
-image: onap/clamp-dashboard-logstash:3.0.1
+image: onap/clamp-dashboard-logstash:3.0.2
pullPolicy: Always
# flag to enable debugging - application support required
# application image
repository: nexus3.onap.org:10001
-image: onap/clamp:3.0.1
+image: onap/clamp:3.0.2
pullPolicy: Always
# flag to enable debugging - application support required
fieldPath: metadata.namespace
# War Container
- name: "{{ .Chart.Name }}-war"
- image: "{{ .Values.repository }}/{{ .Values.warImage }}"
+ image: "{{ include "common.repository" . }}/{{ .Values.warImage }}"
command: ["cp","/app/MUSIC.war","/webapps"]
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
containers:
# Tomcat Container
- name: "{{ include "common.name" . }}"
- image: "{{ .Values.repository }}/{{ .Values.image }}"
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
---
apiVersion: v1
data:
-{{ tpl (.Files.Glob "resources/config/aai_keystore").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/aai_keystore").AsSecrets . | indent 2 }}
metadata:
name: {{ .Release.Name}}-aai-keystore
namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
kind: Secret
+type: Opaque
\ No newline at end of file
{{ if .Values.componentImages.datafile_collector }}
tag_version: {{ include "common.repository" . }}/{{ .Values.componentImages.datafile_collector }}
{{ end }}
-host_port: 30223
-host_port_secure: 30262
+host_port: {{ .Values.config.address.datafile_collector.port }}
+host_port_secure: {{ .Values.config.address.datafile_collector.portSecure }}
dmaap_mr_host: "{{ .Values.config.address.message_router }}"
dmaap_mr_port: 3904
dmaap_mr_user: "admin"
{{ if .Values.componentImages.ves }}
tag_version: {{ include "common.repository" . }}/{{ .Values.componentImages.ves }}
{{ end }}
-external_port : "30235"
+external_port : {{ .Values.config.address.ves.port }}
ves_other_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_OTHER_OUTPUT/"
ves_heartbeat_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_HEARTBEAT_OUTPUT/"
ves_fault_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_FAULT_OUTPUT/"
host: consul-server
port: 8500
cm: dcae-cloudify-manager
+ datafile_collector:
+ port: 30223
+ portSecure: 30262
dmaap_dr_prov: dmaap-dr-prov
message_router: message-router
msb_discovery: msb-discovery
msb_iag: msb-iag
policy_pdp: pdp
sdc: sdc-be
+ ves:
+ port: 30235
# redisCaching is a string not a boolean!
redisCaching: "false"
config_binding_service: onap/org.onap.dcaegen2.platform.configbinding.app-app:2.2.3
datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.0.3
deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:3.0.3
- holmes_rules: onap/holmes/rule-management:1.2.0
- holmes_engine: onap/holmes/engine-management:1.2.0
+ holmes_rules: onap/holmes/rule-management:1.2.3
+ holmes_engine: onap/holmes/engine-management:1.2.2
inventory: onap/org.onap.dcaegen2.platform.inventory-api:3.0.4
policy_handler: onap/org.onap.dcaegen2.platform.policy-handler:4.4.0
service_change_handler: onap/org.onap.dcaegen2.platform.servicechange-handler:1.1.5
# Kubernetes namespace for components deployed via Cloudify manager
# If empty, use the common namespace
# dcae_ns: "onap"
-
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/dmaap/dmaap-mr:1.1.7
+image: onap/dmaap/dmaap-mr:1.1.8
pullPolicy: Always
kafka:
# application image
repository: nexus3.onap.org:10001
-image: onap/optf-cmso-service:latest
+image: onap/optf-cmso-service:1.0.1
pullPolicy: Always
#init container image
dbinit:
- image: onap/optf-cmso-dbinit:latest
+ image: onap/optf-cmso-dbinit:1.0.1
# flag to enable debugging - application support required
debugEnabled: false
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
name: {{ .Values.service.portName }}-{{ .Values.service.externalPort2 }}
{{- else -}}
- - port: {{ .Values.service.type.externalPort }}
- targetPort: {{ .Values.service.type.internalPort }}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
name: {{ .Values.service.portName }}
{{- end}}
selector:
"description": "ONAP_VPG_NAMING_TIMESTAMP"
}' 'https://{{.Values.global.pdp.nameOverride}}:{{.Values.config.pdpPort}}/pdp/api/createPolicy'
+sleep 2
+
+echo "Create SDNC vSN Naming Policy"
+curl -k -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "configBody": "{\"service\":\"SDNC-GenerateName\",\"version\":\"CSIT\",\"content\":{\"policy-instance-name\":\"ONAP_VSN_NAMING_TIMESTAMP\",\"naming-models\":[{\"naming-properties\":[{\"property-name\":\"AIC_CLOUD_REGION\"},{\"property-name\":\"nfRole\"},{\"property-name\":\"TIMESTAMP\"},{\"property-value\":\"_\",\"property-name\":\"DELIMITER\"}],\"naming-type\":\"VNF\",\"nfRole\":\"vSN\",\"naming-recipe\":\"AIC_CLOUD_REGION|DELIMITER|nfRole|DELIMITER|TIMESTAMP\"},{\"naming-properties\":[{\"property-name\":\"VNF_NAME\"},{\"property-name\":\"SEQUENCE\",\"increment-sequence\":{\"max\":\"zzz\",\"scope\":\"ENTIRETY\",\"start-value\":\"001\",\"length\":\"3\",\"increment\":\"1\",\"sequence-type\":\"alpha-numeric\"}},{\"property-name\":\"NFC_NAMING_CODE\"},{\"property-value\":\"_\",\"property-name\":\"DELIMITER\"}],\"naming-type\":\"VNFC\",\"nfRole\":\"vSN\",\"naming-recipe\":\"VNF_NAME|DELIMITER|NFC_NAMING_CODE|DELIMITER|SEQUENCE\"},{\"naming-properties\":[{\"property-name\":\"VNF_NAME\"},{\"property-value\":\"_\",\"property-name\":\"DELIMITER\"},{\"property-name\":\"VF_MODULE_LABEL\"},{\"property-name\":\"VF_MODULE_TYPE\"},{\"property-name\":\"SEQUENCE\",\"increment-sequence\":{\"max\":\"zzz\",\"scope\":\"PRECEEDING\",\"start-value\":\"01\",\"length\":\"3\",\"increment\":\"1\",\"sequence-type\":\"alpha-numeric\"}}],\"naming-type\":\"VF-MODULE\",\"nfRole\":\"vSN\",\"naming-recipe\":\"VNF_NAME|DELIMITER|VF_MODULE_LABEL|DELIMITER|VF_MODULE_TYPE|DELIMITER|SEQUENCE\"},{\"naming-properties\":[{\"property-name\":\"VNF_NAME\"}],\"naming-type\":\"KEY\",\"nfRole\":\"vSN\",\"naming-recipe\":\"VNF_NAME\"},{\"naming-properties\":[{\"property-name\":\"VNF_NAME\"},{\"property-value\":\"protected\",\"property-name\":\"CONSTANT\"},{\"property-value\":\"_\",\"property-name\":\"DELIMITER\"}],\"naming-type\":\"protected_private_net_id\",\"nfRole\":\"vSN\",\"naming-recipe\":\"VNF_NAME|DELIMITER|CONSTANT\"},{\"naming-properties\":[{\"property-name\":\"VNF_NAME\"},{\"property-value\":\"unprotected\",\"property-name\":\"CONSTANT\"},{\"property-value\":\"_\",\"property-name\":\"DELIMITER\"}],\"naming-type\":\"unprotected_private_net_id\",\"nfRole\":\"vSN\",\"naming-recipe\":\"VNF_NAME|DELIMITER|CONSTANT\"}]}}",
+ "policyName": "SDNC_Policy.ONAP_VSN_NAMING_TIMESTAMP",
+ "policyConfigType": "MicroService",
+ "onapName": "SDNC",
+ "riskLevel": "4",
+ "riskType": "test",
+ "guard": "false",
+ "priority": "4",
+ "description": "ONAP_VSN_NAMING_TIMESTAMP"
+}' 'https://{{.Values.global.pdp.nameOverride}}:{{.Values.config.pdpPort}}/pdp/api/createPolicy'
+
#########################################Creating OOF PCI Policies##########################################
sleep 2
"policyType": "MicroService"
}' 'https://{{.Values.global.pdp.nameOverride}}:{{.Values.config.pdpPort}}/pdp/api/pushPolicy'
+sleep 10
+
+echo "pushPolicy : PUT : SDNC_Policy.ONAP_VSN_NAMING_TIMESTAMP"
+curl -k -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "pdpGroup": "default",
+ "policyName": "SDNC_Policy.ONAP_VSN_NAMING_TIMESTAMP",
+ "policyType": "MicroService"
+}' 'https://{{.Values.global.pdp.nameOverride}}:{{.Values.config.pdpPort}}/pdp/api/pushPolicy'
+
#########################################Pushing OOF PCI Policies##########################################
sleep 10
else
# code if not found
echo "$i_topic NOT found."
- curl -X POST -H "content-type: application/json" --data "Empty post to create topic" http://$dmaap_mr_host:$dmaap_mr_port/events/$i_topic
+ curl -X POST -H "content-type: application/json" --data '{"event":"create topic"}' http://$dmaap_mr_host:$dmaap_mr_port/events/$i_topic
fi
done
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
+
+ Modifications to this file for use in ONAP are also subject to the Apache-2.0 license.
-->
<!-- Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" at this level.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-app:2.3.0
+image: onap/portal-app:2.3.1
pullPolicy: Always
# default number of instances
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-db:2.3.0
+image: onap/portal-db:2.3.1
pullPolicy: Always
readinessImage: readiness-check:2.0.0
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-sdk:2.3.0
+image: onap/portal-sdk:2.3.1
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/portal-wms:2.3.0
+image: onap/portal-wms:2.3.1
pullPolicy: Always
# flag to enable debugging - application support required
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP SDC DCAE Backend client of TOSCALAB and SDC
+name: sdc-dcae-be
+version: 3.0.0
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>\r
+<!--\r
+================================================================================\r
+Copyright (C) 2018 AT&T Intellectual Property\r
+================================================================================\r
+Licensed under the Apache License, Version 2.0 (the "License");\r
+you may not use this file except in compliance with the License.\r
+You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+Unless required by applicable law or agreed to in writing, software\r
+distributed under the License is distributed on an "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+See the License for the specific language governing permissions and\r
+limitations under the License.\r
+================================================================================\r
+-->\r
+\r
+<configuration scan="true" scanPeriod="3 seconds">\r
+ <property name="logDir" value="/var/log/onap" />\r
+ <property name="componentName" scope="system" value="sdc"></property>\r
+ <property name="subComponentName" scope="system" value="dcae-be"></property>\r
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />\r
+ <property file="${config.home}/dcae-be/configuration.yaml" />\r
+ <property name="enable-all-log" scope="context" value="false" />\r
+ <!-- log file names -->\r
+ <property name="errorLogName" value="error" />\r
+ <property name="metricsLogName" value="metrics" />\r
+ <property name="auditLogName" value="audit" />\r
+ <property name="debugLogName" value="debug" />\r
+ <property name="transactionLogName" value="transaction" />\r
+ <property name="allLogName" value="all" />\r
+ <property name="queueSize" value="256" />\r
+ <property name="maxFileSize" value="50MB" />\r
+ <property name="maxHistory" value="30" />\r
+ <property name="totalSizeCap" value="10GB" />\r
+ <property name="pattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />\r
+ <!-- All log -->\r
+ <if condition='property("enable-all-log").equalsIgnoreCase("true")'>\r
+ <then>\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ALL_ROLLING">\r
+ <file>${logDirectory}/${allLogName}.log</file>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${allLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ALL">\r
+ <appender-ref ref="ALL_ROLLING" />\r
+ </appender>\r
+ </then>\r
+ </if>\r
+ <!-- Error log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ERROR_ROLLING">\r
+ <file>${logDirectory}/${errorLogName}.log</file>\r
+ <!-- Audit messages filter - deny audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>AUDIT_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- Transaction messages filter - deny Transaction messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->\r
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">\r
+ <level>INFO</level>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Debug log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="DEBUG_ROLLING">\r
+ <file>${logDirectory}/${debugLogName}.log</file>\r
+ <!-- No need to deny audit messages - they are INFO only, will be denied\r
+ anyway -->\r
+ <!-- Transaction messages filter - deny Transaction messages, there are\r
+ some DEBUG level messages among them -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- accept DEBUG and TRACE level -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.GEventEvaluator">\r
+ <expression>e.level.toInt() <= DEBUG.toInt()</expression>\r
+ </evaluator>\r
+ <OnMismatch>DENY</OnMismatch>\r
+ <OnMatch>NEUTRAL</OnMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Audit log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="AUDIT_ROLLING">\r
+ <file>${logDirectory}/${auditLogName}.log</file>\r
+ <!-- Audit messages filter - accept audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>AUDIT_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>DENY</onMismatch>\r
+ <onMatch>ACCEPT</onMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- SdncTransaction log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="TRANSACTION_ROLLING">\r
+ <file>${logDirectory}/${transactionLogName}.log</file>\r
+ <!-- Transaction messages filter - accept audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>DENY</onMismatch>\r
+ <onMatch>ACCEPT</onMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${transactionLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Asynchronicity Configurations -->\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_DEBUG">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="DEBUG_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_TRANSACTION">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="TRANSACTION_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ERROR">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="ERROR_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_AUDIT">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="AUDIT_ROLLING" />\r
+ </appender>\r
+ <root level="INFO">\r
+ <appender-ref ref="ASYNC_ERROR" />\r
+ <appender-ref ref="ASYNC_DEBUG" />\r
+ <appender-ref ref="ASYNC_AUDIT" />\r
+ <appender-ref ref="ASYNC_TRANSACTION" />\r
+ <if condition='property("enable-all-log").equalsIgnoreCase("true")'>\r
+ <then>\r
+ <appender-ref ref="ALL_ROLLING" />\r
+ </then>\r
+ </if>\r
+ </root>\r
+ <logger level="INFO" name="org.openecomp.sdc" />\r
+</configuration>\r
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-logging-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
\ No newline at end of file
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "sdc-be"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ - name: {{ include "common.name" . }}-job-completion
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
+ command:
+ - /root/job_complete.py
+ args:
+ - --job-name
+ - {{ .Release.Name }}-sdc-be-config-backend
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ {{ if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /dcae/conf/composition
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: HOST_IP
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-environments
+ mountPath: /var/opt/dcae-be/chef-solo/environments/
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-logback
+ mountPath: /tmp/logback.xml
+ subPath: logback.xml
+ lifecycle:
+ postStart:
+ exec:
+ command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/var/lib/jetty/config/dcae-be/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logback
+ configMap:
+ name : {{ include "common.fullname" . }}-logging-configmap
+ - name: {{ include "common.fullname" . }}-environments
+ configMap:
+ name: {{ .Release.Name }}-sdc-environments-configmap
+ defaultMode: 0755
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+ name: {{ include "common.fullname" . }}-tools
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}-job
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ backoffLimit: 20
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}-job
+ release: {{ .Release.Name }}
+ spec:
+ restartPolicy: Never
+ initContainers:
+ - name: {{ include "common.name" . }}-init-readiness
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ include "common.name" . }}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}-job
+ image: {{ include "common.repository" . }}/{{ .Values.backendInitImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-environments
+ mountPath: /var/opt/dcae-tools/chef-solo/environments
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: HOST_IP
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+ volumes:
+ - name: {{ include "common.fullname" . }}-environments
+ configMap:
+ name: {{ .Release.Name }}-sdc-environments-configmap
+ defaultMode: 0755
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ restartPolicy: Never
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "sdc-dcae-be",
+ "version": "v1",
+ "url": "/dcae",
+ "protocol": "REST",
+ "port": "{{ .Values.service.internalPort2 }}",
+ "visualRange": "1"
+ }
+ ]'
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dcae-be:1.3-STAGING-latest
+pullPolicy: Always
+backendInitImage: onap/dcae-tools:1.3-STAGING-latest
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+config:
+ javaOptions: -XX:MaxPermSize=256m -Xmx1024m -Dconfig.home=config -Dlog.home=/var/lib/jetty/logs/ -Dlogging.config=config/dcae-be/logback-spring.xml
+ cassandraSslEnabled: "false"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 240
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 240
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: sdc-dcae-be
+ portName: sdc-dcae-be-8082
+ externalPort: 8082
+ internalPort: 8082
+ portName2: sdc-dcae-be-8444
+ externalPort2: 8444
+ internalPort2: 8444
+
+ingress:
+ enabled: false
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
+ unlimited: {}
\ No newline at end of file
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP DCAE desiner composition tool for creating customized templates
+name: sdc-dcae-dt
+version: 3.0.0
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>\r
+<!--\r
+================================================================================\r
+Copyright (C) 2018 AT&T Intellectual Property\r
+================================================================================\r
+Licensed under the Apache License, Version 2.0 (the "License");\r
+you may not use this file except in compliance with the License.\r
+You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+Unless required by applicable law or agreed to in writing, software\r
+distributed under the License is distributed on an "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+See the License for the specific language governing permissions and\r
+limitations under the License.\r
+================================================================================\r
+-->\r
+\r
+<configuration scan="true" scanPeriod="3 seconds">\r
+ <property name="logDir" value="/var/log/onap" />\r
+ <property name="componentName" scope="system" value="sdc"></property>\r
+ <property name="subComponentName" scope="system" value="dcae-dt"></property>\r
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />\r
+ <property file="${config.home}/dcae-dt/configuration.yaml" />\r
+ <property name="enable-all-log" scope="context" value="false" />\r
+ <!-- log file names -->\r
+ <property name="errorLogName" value="error" />\r
+ <property name="metricsLogName" value="metrics" />\r
+ <property name="auditLogName" value="audit" />\r
+ <property name="debugLogName" value="debug" />\r
+ <property name="transactionLogName" value="transaction" />\r
+ <property name="allLogName" value="all" />\r
+ <property name="queueSize" value="256" />\r
+ <property name="maxFileSize" value="50MB" />\r
+ <property name="maxHistory" value="30" />\r
+ <property name="totalSizeCap" value="10GB" />\r
+ <property name="pattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />\r
+ <!-- All log -->\r
+ <if condition='property("enable-all-log").equalsIgnoreCase("true")'>\r
+ <then>\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ALL_ROLLING">\r
+ <file>${logDirectory}/${allLogName}.log</file>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${allLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ALL">\r
+ <appender-ref ref="ALL_ROLLING" />\r
+ </appender>\r
+ </then>\r
+ </if>\r
+ <!-- Error log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ERROR_ROLLING">\r
+ <file>${logDirectory}/${errorLogName}.log</file>\r
+ <!-- Audit messages filter - deny audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>AUDIT_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- Transaction messages filter - deny Transaction messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->\r
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">\r
+ <level>INFO</level>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Debug log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="DEBUG_ROLLING">\r
+ <file>${logDirectory}/${debugLogName}.log</file>\r
+ <!-- No need to deny audit messages - they are INFO only, will be denied\r
+ anyway -->\r
+ <!-- Transaction messages filter - deny Transaction messages, there are\r
+ some DEBUG level messages among them -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- accept DEBUG and TRACE level -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.GEventEvaluator">\r
+ <expression>e.level.toInt() <= DEBUG.toInt()</expression>\r
+ </evaluator>\r
+ <OnMismatch>DENY</OnMismatch>\r
+ <OnMatch>NEUTRAL</OnMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Audit log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="AUDIT_ROLLING">\r
+ <file>${logDirectory}/${auditLogName}.log</file>\r
+ <!-- Audit messages filter - accept audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>AUDIT_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>DENY</onMismatch>\r
+ <onMatch>ACCEPT</onMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- SdncTransaction log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="TRANSACTION_ROLLING">\r
+ <file>${logDirectory}/${transactionLogName}.log</file>\r
+ <!-- Transaction messages filter - accept audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>DENY</onMismatch>\r
+ <onMatch>ACCEPT</onMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${transactionLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Asynchronicity Configurations -->\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_DEBUG">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="DEBUG_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_TRANSACTION">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="TRANSACTION_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ERROR">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="ERROR_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_AUDIT">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="AUDIT_ROLLING" />\r
+ </appender>\r
+ <root level="INFO">\r
+ <appender-ref ref="ASYNC_ERROR" />\r
+ <appender-ref ref="ASYNC_DEBUG" />\r
+ <appender-ref ref="ASYNC_AUDIT" />\r
+ <appender-ref ref="ASYNC_TRANSACTION" />\r
+ <if condition='property("enable-all-log").equalsIgnoreCase("true")'>\r
+ <then>\r
+ <appender-ref ref="ALL_ROLLING" />\r
+ </then>\r
+ </if>\r
+ </root>\r
+ <logger level="INFO" name="org.openecomp.sdc" />\r
+</configuration>\r
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.fullname" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-logging-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - sdc-dcae-be
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ - name: {{ include "common.name" . }}-job-completion
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
+ command:
+ - /root/job_complete.py
+ args:
+ - --job-name
+ - {{ .Release.Name }}-sdc-dcae-be-tools
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ {{ if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /dcae/healthCheckOld
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: HOST_IP
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-environments
+ mountPath: /var/opt/dcae-dt/chef-solo/environments/
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-logback
+ mountPath: /tmp/logback.xml
+ subPath: logback.xml
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logback
+ configMap:
+ name : {{ include "common.fullname" . }}-logging-configmap
+ - name: {{ include "common.fullname" . }}-environments
+ configMap:
+ name: {{ .Release.Name }}-sdc-environments-configmap
+ defaultMode: 0755
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "sdc-dcae-dt",
+ "version": "v1",
+ "url": "/dcae",
+ "protocol": "UI",
+ "port": "{{ .Values.service.internalPort }}",
+ "visualRange": "0|1"
+ }
+ ]'
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.portName }}2
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName }}2
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dcae-dt:1.2-STAGING-latest
+pullPolicy: IfNotPresent
+config:
+ javaOptions: -XX:MaxPermSize=256m -Xmx1024m -Dconfig.home=config -Dlog.home=/var/lib/jetty/logs/ -Dlogging.config=config/dcae-dt/logback-spring.xml
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: NodePort
+ name: sdc-dcae-dt
+ portName: dcae-dt
+ nodePort: "65"
+ internalPort: 8186
+ portName2: dcae-dt2
+ nodePort2: "66"
+ internalPort2: 9446
+
+ingress:
+ enabled: false
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
+ unlimited: {}
\ No newline at end of file
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2013 Amdocs, AT&T,Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP SDC DCAE UI for service monitoring and MC create and configure
+name: sdc-dcae-fe
+version: 3.0.0
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>\r
+<!--\r
+================================================================================\r
+Copyright (C) 2018 AT&T Intellectual Property\r
+================================================================================\r
+Licensed under the Apache License, Version 2.0 (the "License");\r
+you may not use this file except in compliance with the License.\r
+You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+Unless required by applicable law or agreed to in writing, software\r
+distributed under the License is distributed on an "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+See the License for the specific language governing permissions and\r
+limitations under the License.\r
+================================================================================\r
+-->\r
+<configuration scan="true" scanPeriod="3 seconds">\r
+ <property name="logDir" value="/var/log/onap" />\r
+ <property name="componentName" scope="system" value="sdc"></property>\r
+ <property name="subComponentName" scope="system" value="dcae-fe"></property>\r
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />\r
+ <property file="${config.home}/dcae-fe/configuration.yaml" />\r
+ <property name="enable-all-log" scope="context" value="false" />\r
+ <!-- log file names -->\r
+ <property name="errorLogName" value="error" />\r
+ <property name="metricsLogName" value="metrics" />\r
+ <property name="auditLogName" value="audit" />\r
+ <property name="debugLogName" value="debug" />\r
+ <property name="transactionLogName" value="transaction" />\r
+ <property name="allLogName" value="all" />\r
+ <property name="queueSize" value="256" />\r
+ <property name="maxFileSize" value="50MB" />\r
+ <property name="maxHistory" value="30" />\r
+ <property name="totalSizeCap" value="10GB" />\r
+ <property name="pattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />\r
+ <!-- All log -->\r
+ <if condition='property("enable-all-log").equalsIgnoreCase("true")'>\r
+ <then>\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ALL_ROLLING">\r
+ <file>${logDirectory}/${allLogName}.log</file>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${allLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ALL">\r
+ <appender-ref ref="ALL_ROLLING" />\r
+ </appender>\r
+ </then>\r
+ </if>\r
+ <!-- Error log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ERROR_ROLLING">\r
+ <file>${logDirectory}/${errorLogName}.log</file>\r
+ <!-- Audit messages filter - deny audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>AUDIT_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- Transaction messages filter - deny Transaction messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->\r
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">\r
+ <level>INFO</level>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Debug log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="DEBUG_ROLLING">\r
+ <file>${logDirectory}/${debugLogName}.log</file>\r
+ <!-- No need to deny audit messages - they are INFO only, will be denied\r
+ anyway -->\r
+ <!-- Transaction messages filter - deny Transaction messages, there are\r
+ some DEBUG level messages among them -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>NEUTRAL</onMismatch>\r
+ <onMatch>DENY</onMatch>\r
+ </filter>\r
+ <!-- accept DEBUG and TRACE level -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.GEventEvaluator">\r
+ <expression>e.level.toInt() <= DEBUG.toInt()</expression>\r
+ </evaluator>\r
+ <OnMismatch>DENY</OnMismatch>\r
+ <OnMatch>NEUTRAL</OnMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Audit log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="AUDIT_ROLLING">\r
+ <file>${logDirectory}/${auditLogName}.log</file>\r
+ <!-- Audit messages filter - accept audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>AUDIT_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>DENY</onMismatch>\r
+ <onMatch>ACCEPT</onMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- SdncTransaction log -->\r
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="TRANSACTION_ROLLING">\r
+ <file>${logDirectory}/${transactionLogName}.log</file>\r
+ <!-- Transaction messages filter - accept audit messages -->\r
+ <filter class="ch.qos.logback.core.filter.EvaluatorFilter">\r
+ <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">\r
+ <marker>TRANSACTION_MARKER</marker>\r
+ </evaluator>\r
+ <onMismatch>DENY</onMismatch>\r
+ <onMatch>ACCEPT</onMatch>\r
+ </filter>\r
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">\r
+ <fileNamePattern>${logDirectory}/${transactionLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>\r
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">\r
+ <maxFileSize>${maxFileSize}</maxFileSize>\r
+ </timeBasedFileNamingAndTriggeringPolicy>\r
+ <maxHistory>${maxHistory}</maxHistory>\r
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>\r
+ </rollingPolicy>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <!-- Asynchronicity Configurations -->\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_DEBUG">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="DEBUG_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_TRANSACTION">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="TRANSACTION_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ERROR">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="ERROR_ROLLING" />\r
+ </appender>\r
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_AUDIT">\r
+ <queueSize>${queueSize}</queueSize>\r
+ <appender-ref ref="AUDIT_ROLLING" />\r
+ </appender>\r
+ <root level="INFO">\r
+ <appender-ref ref="ASYNC_ERROR" />\r
+ <appender-ref ref="ASYNC_DEBUG" />\r
+ <appender-ref ref="ASYNC_AUDIT" />\r
+ <appender-ref ref="ASYNC_TRANSACTION" />\r
+ <if condition='property("enable-all-log").equalsIgnoreCase("true")'>\r
+ <then>\r
+ <appender-ref ref="ALL_ROLLING" />\r
+ </then>\r
+ </if>\r
+ </root>\r
+ <logger level="INFO" name="org.openecomp.sdc" />\r
+</configuration>\r
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.fullname" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-logging-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - sdc-dcae-be
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ - name: {{ include "common.name" . }}-job-completion
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
+ command:
+ - /root/job_complete.py
+ args:
+ - --job-name
+ - {{ .Release.Name }}-sdc-dcae-be-tools
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ {{ if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /dcaed/healthCheck
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: HOST_IP
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-environments
+ mountPath: /var/opt/dcae-fe/chef-solo/environments/
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-logback
+ mountPath: /tmp/logback.xml
+ subPath: logback.xml
+ lifecycle:
+ postStart:
+ exec:
+ command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/var/lib/jetty/config/dcae-fe/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logback
+ configMap:
+ name : {{ include "common.fullname" . }}-logging-configmap
+ - name: {{ include "common.fullname" . }}-environments
+ configMap:
+ name: {{ .Release.Name }}-sdc-environments-configmap
+ defaultMode: 0755
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "dcae-gui",
+ "version": "v1",
+ "url": "/dcae",
+ "protocol": "UI",
+ "port": "{{ .Values.service.internalPort }}",
+ "visualRange": "0|1"
+ }
+ ]'
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.portName }}2
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName }}2
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dcae-fe:1.3-STAGING-latest
+pullPolicy: Always
+config:
+ javaOptions: -XX:MaxPermSize=256m -Xmx1024m -Dconfig.home=config -Dlog.home=/var/lib/jetty/logs/ -Dlogging.config=config/dcae-fe/logback-spring.xml
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ #Example service definition with external, internal and node ports.
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: NodePort
+ name: sdc-dcae-fe
+ portName: dcae-fe
+ nodePort: "63"
+ internalPort: 8183
+ portName2: dcae-fe2
+ nodePort2: "64"
+ internalPort2: 9444
+
+ingress:
+ enabled: false
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
+ unlimited: {}
\ No newline at end of file
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Tosca model for component monitoring and descriptors deployment
+name: sdc-dcae-tosca-lab
+version: 3.0.0
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+# Copyright © 2017 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "sdc-dcae-be"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ {{ if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /healthcheck
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: HOST_IP
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-environments
+ mountPath: /var/opt/dcae-be/chef-solo/environments/
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-environments
+ configMap:
+ name: {{ .Release.Name }}-sdc-environments-configmap
+ defaultMode: 0755
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "dcae-be",
+ "version": "v1",
+ "url": "/dcae",
+ "protocol": "REST",
+ "port": "{{ .Values.service.internalPort2 }}",
+ "visualRange": "1"
+ }
+ ]'
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dcae-tosca-app:1.3-STAGING-latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+config:
+ javaOptions: -XX:MaxPermSize=256m -Xmx1024m
+ cassandraSslEnabled: "false"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: sdc-dcae-tosca-lab
+ portName: sdc-dcae-tosca-lab-8085
+ externalPort: 8085
+ internalPort: 8085
+ portName2: sdc-dcae-tosca-lab-8445
+ externalPort2: 8445
+ internalPort2: 8445
+
+ingress:
+ enabled: false
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
+ unlimited: {}
\ No newline at end of file
"CS_VIP": "sdc-cs.{{include "common.namespace" .}}",
"BE_VIP": "sdc-be.{{include "common.namespace" .}}",
"ONBOARDING_BE_VIP": "sdc-onboarding-be.{{include "common.namespace" .}}",
+ "DCAE_BE_VIP": "sdc-dcae-be.{{include "common.namespace" .}}",
+ "DCAE_FE_VIP": "sdc-dcae-fe.{{include "common.namespace" .}}",
+ "DCAE_TOSCA_LAB_VIP": "sdc-dcae-tosca-lab.{{include "common.namespace" .}}",
"FE_VIP": "sdc-fe.{{include "common.namespace" .}}",
"ES_VIP": "sdc-es.{{include "common.namespace" .}}",
"KB_VIP": "sdc-kb.{{include "common.namespace" .}}",
- "DCAE_BE_VIP": "",
- "DCAE_FE_VIP": "",
"interfaces": {
"application": "eth0",
"private": "eth0"
},
"Plugins": {
"DCAE": {
- "dcae_discovery_url": "{{.Values.config.environment.dcaeUrl}}",
- "dcae_source_url": "{{.Values.config.environment.dcaeUrl}}"
+ "dcae_discovery_url": "http://sdc-dcae-fe.{{include "common.namespace" .}}:8183/dcaed/#/home",
+ "dcae_source_url": "http://sdc.dcae.plugin.simpledemo.onap.org:30263/dcaed/#/home"
},
"DCAE-TAB": {
- "dcae_dt_discovery_url": "",
- "dcae_dt_source_url": ""
+ "dcae_dt_discovery_url": "http://sdc-dcae-dt.{{include "common.namespace" .}}:8186/dcae/#/dcae/home",
+ "dcae_dt_source_url": "http://sdc.dcae.plugin.simpledemo.onap.org:30265/dcae/#/dcae/home"
},
"WORKFLOW": {
"workflow_discovery_url": "http://sdc-wfd-fe.{{include "common.namespace" .}}:8080",
logstashServiceName: log-ls
logstashPort: 5044
environment:
- dcaeUrl: 10.0.2.15
workflowUrl: 10.0.2.15
vnfRepoPort: 8702
+
sdc-es:
service:
name: sdc-es
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/admportal-sdnc-image:1.3.4
+image: onap/admportal-sdnc-image:1.4.1
pullPolicy: Always
# flag to enable debugging - application support required
# See the License for the specific language governing permissions and
# limitations under the License.
aai:
- auth: 2630606608347B7124C244AB0FE34F6F
+ auth: 65885E7C4E860E420808030D8BC653073E6782CB5026EC8F49E3E5C6F3E27F6A
dme2:
timeout: '30000'
endpoint: https://aai.{{ include "common.namespace" . }}:8443
endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}g:8087/services/rest/v1/volume-groups
vnf-async:
endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}:8087/services/VnfAsync
+ workflow:
+ message:
+ endpoint: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/mso/WorkflowMessage
bpmn:
process:
historyTimeToLive: '30'
# See the License for the specific language governing permissions and
# limitations under the License.
aai:
- auth: 2630606608347B7124C244AB0FE34F6F
+ auth: 65885E7C4E860E420808030D8BC653073E6782CB5026EC8F49E3E5C6F3E27F6A
server:
port: {{ index .Values.containerPort }}
spring:
# application image
repository: nexus3.onap.org:10001
-image: onap/usecase-ui:1.2.0
+image: onap/usecase-ui:1.2.1
pullPolicy: Always
# application configuration
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/test-engine:1.0.0-latest
+image: onap/vvp/test-engine:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/cms:1.0.0-latest
+image: onap/vvp/cms:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/engagementmgr:1.0.0-latest
+image: onap/vvp/engagementmgr:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/gitlab:1.0.0-latest
+image: onap/vvp/gitlab:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/image-scanner:1.0.0-latest
+image: onap/vvp/image-scanner:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/jenkins:1.0.0-latest
+image: onap/vvp/jenkins:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/postgresql:1.0.0-latest
+image: onap/vvp/postgresql:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vvp/portal:1.0.0-latest
+image: onap/vvp/portal:1.0.0
pullPolicy: Always
# flag to enable debugging - application support required