oom_developer_guide.rst
oom_cloud_setup_guide.rst
release-notes.rst
+ oom_setup_kubernetes_rancher.rst
--- /dev/null
+#!/bin/bash
+
+usage () {
+ echo "Usage:"
+ echo " ./$(basename $0) node1_ip node2_ip ... nodeN_ip"
+ exit 1
+}
+
+if [ "$#" -lt 1 ]; then
+ echo "Missing NFS slave nodes"
+ usage
+fi
+
+#Install NFS kernel
+sudo apt-get update
+sudo apt-get install -y nfs-kernel-server
+
+#Create /dockerdata-nfs and set permissions
+sudo mkdir -p /dockerdata-nfs
+sudo chmod 777 -R /dockerdata-nfs
+sudo chown nobody:nogroup /dockerdata-nfs/
+
+#Update the /etc/exports
+NFS_EXP=""
+for i in $@; do
+ NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) "
+done
+echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports
+
+#Restart the NFS service
+sudo exportfs -a
+sudo systemctl restart nfs-kernel-server
.. _Setting Up Kubernetes with Rancher: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+Rancher
.. _Setting Up Kubernetes with Kubeadm: https://wiki.onap.org/display/DW/Deploying+Kubernetes+Cluster+with+kubeadm
.. _Setting Up Kubernetes with Cloudify: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+Cloudify
+.. _ONAP on Kubernetes Wiki: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes
.. figure:: oomLogoV2-medium.png
:align: right
===== ===== ====== ====================
RAM HD vCores Ports
===== ===== ====== ====================
- 128GB 160GB 16 0.0.0.0/0 (all open)
+ 128GB 160GB 32 0.0.0.0/0 (all open)
===== ===== ====== ====================
+.. note::
+ Kubernetes supports a maximum of 110 pods per node which forces one to use at
+ least two nodes to deploy all of ONAP although at least three are recommended
+ (for example 4x32GB - 8 vCores each). Subsets of ONAP may still be deployed
+ on a single node.
+
Cloud Installation
==================
-#. OOM supports deployment on major public clouds. The following guides
- provide instructions on how to deploy ONAP on these clouds:
-
- - `Microsoft Azure`_,
- - `Amazon AWS`_,
- - `Google GCE`_,
- - `VMware VIO`_,
- - IBM, and
- - `Openstack`_.
-
-#. Alternatively, OOM can be deployed on a private set of physical hosts or VMs
- (or even a combination of the two). The following guides describe how to
- create a Kubernetes cluster with popular tools:
-
- - `Setting up Kubernetes with Rancher`_ (recommended)
- - `Setting up Kubernetes with Kubeadm`_
- - `Setting up Kubernetes with Cloudify`_
+.. #. OOM supports deployment on major public clouds. The following guides
+.. provide instructions on how to deploy ONAP on these clouds:
+..
+.. - `Microsoft Azure`_,
+.. - `Amazon AWS`_,
+.. - `Google GCE`_,
+.. - `VMware VIO`_,
+.. - IBM, and
+.. - `Openstack`_.
+..
+.. #. Alternatively, OOM can be deployed on a private set of physical hosts or VMs
+.. (or even a combination of the two). The following guides describe how to
+.. create a Kubernetes cluster with popular tools:
+..
+.. - `Setting up Kubernetes with Rancher`_ (recommended)
+.. - `Setting up Kubernetes with Kubeadm`_
+.. - `Setting up Kubernetes with Cloudify`_
+
+OOM can be deployed on a private set of physical hosts or VMs (or even a
+combination of the two). The following guide describe the recommended method to
+setup a Kubernetes cluster: :ref:`onap-on-kubernetes-with-rancher`.
+
+There are alternative deployment methods described on the `ONAP on Kubernetes Wiki`_
--- /dev/null
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. Copyright 2018 Amdocs, Bell Canada
+
+.. Links
+.. _HELM Best Practices Guide: https://docs.helm.sh/chart_best_practices/#requirements
+.. _kubectl Cheat Sheet: https://kubernetes.io/docs/reference/kubectl/cheatsheet/
+.. _Kubernetes documentation for emptyDir: https://kubernetes.io/docs/concepts/storage/volumes/#emptydir
+.. _Docker DevOps: https://wiki.onap.org/display/DW/Docker+DevOps#DockerDevOps-DockerBuild
+.. _http://cd.onap.info:30223/mso/logging/debug: http://cd.onap.info:30223/mso/logging/debug
+.. _Onboarding and Distributing a Vendor Software Product: https://wiki.onap.org/pages/viewpage.action?pageId=1018474
+.. _README.md: https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/README.md
+
+.. figure:: oomLogoV2-medium.png
+ :align: right
+
+.. _onap-on-kubernetes-with-rancher:
+
+ONAP on Kubernetes with Rancher
+###############################
+
+The following instructions will step you through the installation of Kubernetes
+on an OpenStack environment with Rancher. The development lab used for this
+installation is the ONAP Windriver lab.
+
+This guide does not cover all of the steps required to setup your OpenStack
+environment: e.g. OAM networks and security groups but there is a wealth of
+OpenStack information on the web.
+
+Rancher Installation
+====================
+
+The following instructions describe how to create an Openstack VM running
+Rancher. This node will not be used to host ONAP itself, it will be used
+exclusively by Rancher.
+
+Launch new VM instance to host the Rancher Server
+-------------------------------------------------
+
+.. image:: Rancher-Launch_new_VM_instance_to_host_the_Rancher_Server.jpeg
+
+Select Ubuntu 16.04 as base image
+---------------------------------
+Select "No" on "Create New Volume"
+
+.. image:: Rancher-Select_Ubuntu_16.04_as_base_image.jpeg
+
+Select Flavor
+-------------
+Known issues exist if flavor is too small for Rancher. Please select a flavor
+with at least 4 vCPU and 8GB ram.
+
+.. image:: Rancher-Select_Flavor.jpeg
+
+Networking
+----------
+
+.. image:: Rancher-Networking.jpeg
+
+Security Groups
+---------------
+
+.. image:: Rancher-Security_Groups.jpeg
+
+Key Pair
+--------
+Use an existing key pair (e.g. onap_key), import an existing one or create a
+new one to assign.
+
+.. image:: Rancher-Key_Pair.jpeg
+
+Apply customization script for the Rancher VM
+---------------------------------------------
+
+Click :download:`openstack-rancher.sh <openstack-rancher.sh>` to download the script.
+
+.. literalinclude:: openstack-rancher.sh
+ :language: bash
+
+This customization script will:
+
+* setup root access to the VM (comment out if you wish to disable this
+ capability and restrict access to ssh access only)
+* install docker
+* install rancher
+* install kubectl
+* install helm
+* install nfs server
+
+.. note::
+ The Beijing release of OOM only supports Helm 2.8.2 not the 2.7.2 shown in
+ the screen capture below. The supported versions of all the software components
+ are listed in the :ref:`cloud-setup-guide-label`.
+
+.. image:: Apply_customization_script_for_the_Rancher_VM.jpeg
+
+Launch Instance
+---------------
+
+.. image:: Rancher-Launch_Instance.jpeg
+
+Assign Floating IP for external access
+--------------------------------------
+
+.. image:: Rancher-Allocate_Floating_IP.jpeg
+
+.. image:: Rancher-Manage_Floating_IP_Associations.jpeg
+
+.. image:: Rancher-Launch_Instance.jpeg
+
+Kubernetes Installation
+=======================
+
+Launch new VM instance(s) to create a Kubernetes single host or cluster
+-----------------------------------------------------------------------
+
+To create a cluster:
+
+.. note::
+ #. do not append a '-1' suffix (e.g. sb4-k8s)
+ #. increase count to the # of of kubernetes worker nodes you want (eg. 3)
+
+.. image:: K8s-Launch_new_VM_instance_to_create_a_Kubernetes_single_host_or_cluster.jpeg
+
+Select Ubuntu 16.04 as base image
+---------------------------------
+Select "No" on "Create New Volume"
+
+.. image:: K8s-Select_Ubuntu_16.04_as_base_image.jpeg
+
+Select Flavor
+-------------
+The size of a Kubernetes host depends on the size of the ONAP deployment that
+will be installed.
+
+As of the Beijing release a minimum of 3 x 32GB hosts will be needed to run a
+full ONAP deployment (all components).
+
+If a small subset of ONAP components are being deployed for testing purposes,
+then a single 16GB or 32GB host should suffice.
+
+.. image:: K8s-Select_Flavor.jpeg
+
+Networking
+-----------
+
+.. image:: K8s-Networking.jpeg
+
+Security Group
+---------------
+
+.. image:: K8s-Security_Group.jpeg
+
+Key Pair
+--------
+Use an existing key pair (e.g. onap_key), import an existing one or create a
+new one to assign.
+
+.. image:: K8s-Key_Pair.jpeg
+
+Apply customization script for Kubernetes VM(s)
+-----------------------------------------------
+
+Click :download:`openstack-k8s-node.sh <openstack-k8s-node.sh>` to
+download the script.
+
+.. literalinclude:: openstack-k8s-node.sh
+ :language: bash
+
+This customization script will:
+
+* setup root access to the VM (comment out if you wish to disable this
+ capability and restrict access to ssh access only)
+* install docker
+* install kubectl
+* install helm
+* install nfs common (see configuration step here)
+
+.. note::
+ Ensure you are using the correct versions as described in the
+ :ref:`cloud-setup-guide-label`
+
+Launch Instance
+---------------
+
+.. image:: K8s-Launch_Instance.jpeg
+
+Assign Floating IP for external access
+--------------------------------------
+
+.. image:: K8s-Assign_Floating_IP_for_external_access.jpeg
+
+.. image:: K8s-Manage_Floating_IP_Associations.jpeg
+
+.. image:: K8s-Launch_Instance.jpeg
+
+Setting up an NFS share for Multinode Kubernetes Clusters
+=========================================================
+The figure below illustrates a possible topology of a multinode Kubernetes
+cluster.
+
+.. image:: k8s-topology.jpg
+
+One node, the Master Node, runs Rancher and Helm clients and connects to all
+the Kubernetes nodes in the cluster. Kubernetes nodes, in turn, run Rancher,
+Kubernetes and Tiller (Helm) agents, which receive, execute, and respond to
+commands issued by the Master Node (e.g. kubectl or helm operations). Note that
+the Master Node can be either a remote machine that the user can log in to or a
+local machine (e.g. laptop, desktop) that has access to the Kubernetes cluster.
+
+Deploying applications to a Kubernetes cluster requires Kubernetes nodes to
+share a common, distributed filesystem. One node in the cluster plays the role
+of NFS Master (not to confuse with the Master Node that runs Rancher and Helm
+clients, which is located outside the cluster), while all the other cluster
+nodes play the role of NFS slaves. In the figure above, the left-most cluster
+node plays the role of NFS Master (indicated by the crown symbol). To properly
+set up an NFS share on Master and Slave nodes, the user can run the scripts
+below.
+
+Click :download:`master_nfs_node.sh <master_nfs_node.sh>` to download the script.
+
+.. literalinclude:: master_nfs_node.sh
+ :language: bash
+
+Click :download:`slave_nfs_node.sh <slave_nfs_node.sh>` to download the script.
+
+.. literalinclude:: slave_nfs_node.sh
+ :language: bash
+
+The master_nfs_node.sh script runs in the NFS Master node and needs the list of
+NFS Slave nodes as input, e.g.::
+
+ > sudo ./master_nfs_node.sh node1_ip node2_ip ... nodeN_ip
+
+The slave_nfs_node.sh script runs in each NFS Slave node and needs the IP of
+the NFS Master node as input, e.g.::
+
+ > sudo ./slave_nfs_node.sh master_node_ip
+
+Configuration (Rancher and Kubernetes)
+======================================
+
+Access Rancher server via web browser
+-------------------------------------
+(e.g. http://10.12.6.16:8080/env/1a5/apps/stacks)
+
+.. image:: Access_Rancher_server_via_web_browser.jpeg
+
+Add Kubernetes Environment to Rancher
+-------------------------------------
+
+1. Select “Manage Environments”
+
+.. image:: Add_Kubernetes_Environment_to_Rancher.png
+
+2. Select “Add Environment”
+
+.. image:: Select_Add_Environment.png
+
+3. Add unique name for your new Rancher environment
+
+4. Select the Kubernetes template
+
+5. Click "create"
+
+.. image:: Click_create.jpeg
+
+6. Select the new named environment (ie. SB4) from the dropdown list (top left).
+
+Rancher is now waiting for a Kubernetes Host to be added.
+
+.. image:: K8s-Assign_Floating_IP_for_external_access.jpeg
+
+Add Kubernetes Host
+-------------------
+
+1. If this is the first (or only) host being added - click on the "Add a host" link
+
+.. image:: K8s-Assign_Floating_IP_for_external_access.jpeg
+
+and click on "Save" (accept defaults).
+
+.. image:: and_click_on_Save_accept_defaults.jpeg
+
+otherwise select INFRASTRUCTURE→ Hosts and click on "Add Host"
+
+.. image:: otherwise_select_INFRASTRUCTURE_Hosts_and_click_on_Add_Host.jpg
+
+2. Enter the management IP for the k8s VM (e.g. 10.0.0.4) that was just created.
+
+3. Click on “Copy to Clipboard” button
+
+4. Click on “Close” button
+
+.. image:: Click_on_Close_button.jpeg
+
+Without the 10.0.0.4 IP - the CATTLE_AGENT will be derived on the host - but it
+may not be a routable IP.
+
+Configure Kubernetes Host
+-------------------------
+
+1. Login to the new Kubernetes Host::
+
+ > ssh -i ~/oom-key.pem ubuntu@10.12.5.1
+ The authenticity of host '10.12.5.172 (10.12.5.172)' can't be established.
+ ECDSA key fingerprint is SHA256:tqxayN58nCJKOJcWrEZzImkc0qKQHDDfUTHqk4WMcEI.
+ Are you sure you want to continue connecting (yes/no)? yes
+ Warning: Permanently added '10.12.5.172' (ECDSA) to the list of known hosts.
+ Welcome to Ubuntu 16.04.2 LTS (GNU/Linux 4.4.0-64-generic x86_64)
+
+ * Documentation: https://help.ubuntu.com
+ * Management: https://landscape.canonical.com
+ * Support: https://ubuntu.com/advantage
+
+ Get cloud support with Ubuntu Advantage Cloud Guest:
+ http://www.ubuntu.com/business/services/cloud
+
+ 180 packages can be updated.
+ 100 updates are security updates.
+
+ The programs included with the Ubuntu system are free software;
+ the exact distribution terms for each program are described in the
+ individual files in /usr/share/doc/*/copyright.
+
+ Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
+ applicable law.
+
+ To run a command as administrator (user "root"), use "sudo <command>".
+ See "man sudo_root" for details.
+
+ ubuntu@sb4-k8s-1:~$
+
+
+2. Paste Clipboard content and hit enter to install Rancher Agent::
+
+ ubuntu@sb4-k8s-1:~$ sudo docker run -e CATTLE_AGENT_IP="10.0.0.4“ --rm --privileged -v /var/run/docker.sock:/var/run/docker.sock -v /var/lib/rancher:/var/lib/rancher rancher/agent:v1.2.9 http://10.12.6.16:8080/v1/scripts/5D757C68BD0A2125602A:1514678400000:yKW9xHGJDLvq6drz2eDzR2mjato
+ Unable to find image 'rancher/agent:v1.2.9' locally
+ v1.2.9: Pulling From rancher/agent
+ b3e1c725a85f: Pull complete
+ 6071086409fc: Pull complete
+ d0ac3b234321: Pull complete
+ 87f567b5cf58: Pull complete
+ a63e24b217c4: Pull complete
+ d0a3f58caef0: Pull complete
+ 16914729cfd3: Pull complete
+ dc5c21984c5b: Pull complete
+ d7e8f9784b20: Pull complete
+ Digest: sha256:c21255ac4d94ffbc7b523F870F20ea5189b68Fa3d642800adb4774aab4748e66
+ Status: Downloaded newer image for rancher/agent:v1.2.9
+
+ INFO: Running Agent Registration Process, CATTLE_URL=http://10.12.6.16:8080/v1
+ INFO: Attempting to connect to: http://10.12.6.16:8080/v1
+ INFO: http://10.12.6.16:8080/v1 is accessible
+ INFO: Inspecting host capabilities
+ INFO: Boot2Docker: false
+ INFO: Host writable: true
+ INFO: Token: xxxxxxxx
+ INFO: Running registration
+ INFO: Printing Environment
+ INFO: ENV: CATTLE_ACCESS_KEY=98B35AC484FBF820E0AD
+ INFO: ENV: CATTLE_AGENT_IP=10.0.9.4
+ INFO: ENV: CATTLE_HOME=/var/lib/cattle
+ INFO: ENV: CATTLE_REGISTRATION_ACCESS_KEY=registrationToken
+ INFO: ENV: CATTLE_REGISTRATION_SECRET_KEY=xxxxxxx
+ INFO: ENV: CATTLE_SECRET_KEY=xxxxxxx
+ INFO: ENV: CATTLE_URL=http://10.12.6.16:8080/v1
+ INFO: ENV: DETECTED_CATTLE_AGENT_IP=10.12.5.172
+ INFO: ENV: RANCHER_AGENT_IMAGE=rancher/agent:v1.2.9
+ INFO: Launched Rancher Agent: c27ee0f3dc4c783b0db647ea1f73c35b3843a4b8d60b96375b1a05aa77d83136
+ ubuntu@sb4-k8s-1:~$
+
+3. Return to Rancher environment (e.g. SB4) and wait for services to complete
+ (~ 10-15 mins)
+
+.. image:: Return_to_Rancher_environment_eg_SB4_and_wait_for_services_to_complete_10-15_mins.jpeg
+
+Configure kubectl and helm
+==========================
+In this example we are configuring kubectl and helm that have been installed
+(as a convenience) onto the rancher and kubernetes hosts. Typically you would
+install them both on your PC and remotely connect to the cluster. The following
+procedure would remain the same.
+
+1. Click on CLI and then click on “Generate Config”
+
+.. image:: Click_on_CLI_and_then_click_on_Generate_Config.jpeg
+
+2. Click on “Copy to Clipboard” - wait until you see a "token" - do not copy
+ user+password - the server is not ready at that point
+
+.. image:: Click_on_Copy_to_Clipboard-wait_until_you_see_a_token-do_not_copy_user+password-the_server_is_not_ready_at_that_point.jpeg
+
+3. Create a .kube directory in user directory (if one does not exist)::
+
+ ubuntu@sb4-kSs-1:~$ mkdir .kube
+ ubuntu@sb4-kSs-1:~$ vi .kube/config
+
+4. Paste contents of Clipboard into a file called “config” and save the file::
+
+ apiVersion: v1
+ kind : Config
+ clusters:
+ - cluster:
+ api-version: v1
+ insecure-skip-tls-verify: true
+ server: "https://10.12.6.16:8080/r/projects/1a7/kubernetes:6443"
+ name: "SB4"
+ contexts:
+ - context:
+ cluster: "SB4"
+ user: "SB4"
+ name: "SB4"
+ current-context: "SB4"
+ users:
+ - name: "SB4"
+ user:
+ token: "QmFzaWMgTlRBd01qZzBOemc)TkRrMk1UWkNOMFpDTlVFNlExcHdSa1JhVZreE5XSm1TRGhWU2t0Vk1sQjVhalZaY0dWaFVtZGFVMHQzWW1WWVJtVmpSQT09"
+ ~
+ ~
+ ~
+ - INSERT --
+
+5. Validate that kubectl is able to connect to the kubernetes cluster::
+
+ ubuntu@sb4-k8s-1:~$ kubectl config get-contexts
+ CURRENT NAME CLUSTER AUTHINFO NAMESPACE
+ * SB4 SB4 SB4
+ ubuntu@sb4-kSs-1:~$
+
+and show running pods::
+
+ ubuntu@sb4-k8s-1:~$ kubectl get pods --all-namespaces -o=wide
+ NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE
+ kube-system heapster—7Gb8cd7b5 -q7p42 1/1 Running 0 13m 10.42.213.49 sb4-k8s-1
+ kube-system kube-dns-5d7bM87c9-c6f67 3/3 Running 0 13m 10.42.181.110 sb4-k8s-1
+ kube-system kubernetes-dashboard-f9577fffd-kswjg 1/1 Running 0 13m 10.42.105.113 sb4-k8s-1
+ kube-system monitoring-grafana-997796fcf-vg9h9 1/1 Running 0 13m 10.42,141.58 sb4-k8s-1
+ kube-system monitoring-influxdb-56chd96b-hk66b 1/1 Running 0 13m 10.4Z.246.90 sb4-k8s-1
+ kube-system tiller-deploy-cc96d4f6b-v29k9 1/1 Running 0 13m 10.42.147.248 sb4-k8s-1
+ ubuntu@sb4-k8s-1:~$
+
+6. Validate helm is running at the right version. If not, an error like this
+ will be displayed::
+
+ ubuntu@sb4-k8s-1:~$ helm list
+ Error: incompatible versions c1ient[v2.8.2] server[v2.6.1]
+ ubuntu@sb4-k8s-1:~$
+
+7. Upgrade the server-side component of helm (tiller) via `helm init --upgrade`::
+
+ ubuntu@sb4-k8s-1:~$ helm init --upgrade
+ Creating /home/ubuntu/.helm
+ Creating /home/ubuntu/.helm/repository
+ Creating /home/ubuntu/.helm/repository/cache
+ Creating /home/ubuntu/.helm/repository/local
+ Creating /home/ubuntu/.helm/plugins
+ Creating /home/ubuntu/.helm/starters
+ Creating /home/ubuntu/.helm/cache/archive
+ Creating /home/ubuntu/.helm/repository/repositories.yaml
+ Adding stable repo with URL: https://kubernetes-charts.storage.googleapis.com
+ Adding local repo with URL: http://127.0.0.1:8879/charts
+ $HELM_HOME has been configured at /home/ubuntu/.helm.
+
+ Tiller (the Helm server-side component) has been upgraded to the current version.
+ Happy Helming!
+ ubuntu@sb4-k8s-1:~$
+
+ONAP Deployment via OOM
+=======================
+Now that kubernetes and Helm are installed and configured you can prepare to
+deploy ONAP. Follow the instructions in the README.md_ or look at the official
+documentation to get started:
+
+- :ref:`quick-start-label` - deploy ONAP on an existing cloud
+- :ref:`user-guide-label` - a guide for operators of an ONAP instance
+
+
--- /dev/null
+#!/bin/bash
+
+DOCKER_VERSION=17.03
+KUBECTL_VERSION=1.8.10
+HELM_VERSION=2.8.2
+
+# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
+sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
+sed -i 's/PasswordAuthentication.*/PasswordAuthentication yes/' /etc/ssh/sshd_config
+service sshd restart
+echo -e "oom\noom" | passwd root
+
+apt-get update
+curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
+mkdir -p /etc/systemd/system/docker.service.d/
+cat > /etc/systemd/system/docker.service.d/docker.conf << EOF
+[Service]
+ExecStart=
+ExecStart=/usr/bin/dockerd -H fd:// --insecure-registry=nexus3.onap.org:10001
+EOF
+systemctl daemon-reload
+systemctl restart docker
+apt-mark hold docker-ce
+
+IP_ADDY=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
+HOSTNAME=`hostname`
+
+echo "$IP_ADDY $HOSTNAME" >> /etc/hosts
+
+docker login -u docker -p docker nexus3.onap.org:10001
+
+sudo apt-get install make -y
+
+sudo curl -LO https://storage.googleapis.com/kubernetes-release/release/v$KUBECTL_VERSION/bin/linux/amd64/kubectl
+sudo chmod +x ./kubectl
+sudo mv ./kubectl /usr/local/bin/kubectl
+sudo mkdir ~/.kube
+wget http://storage.googleapis.com/kubernetes-helm/helm-v${HELM_VERSION}-linux-amd64.tar.gz
+sudo tar -zxvf helm-v${HELM_VERSION}-linux-amd64.tar.gz
+sudo mv linux-amd64/helm /usr/local/bin/helm
+
+# install nfs
+sudo apt-get install nfs-common -y
+
+
+exit 0
--- /dev/null
+#!/bin/bash
+
+DOCKER_VERSION=17.03
+RANCHER_VERSION=1.6.14
+KUBECTL_VERSION=1.8.10
+HELM_VERSION=2.8.2
+
+# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
+sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
+sed -i 's/PasswordAuthentication.*/PasswordAuthentication yes/' /etc/ssh/sshd_config
+service sshd restart
+echo -e "oom\noom" | passwd root
+
+apt-get update
+curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
+mkdir -p /etc/systemd/system/docker.service.d/
+cat > /etc/systemd/system/docker.service.d/docker.conf << EOF
+[Service]
+ExecStart=
+ExecStart=/usr/bin/dockerd -H fd:// --insecure-registry=nexus3.onap.org:10001
+EOF
+systemctl daemon-reload
+systemctl restart docker
+apt-mark hold docker-ce
+
+IP_ADDY=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
+HOSTNAME=`hostname`
+
+echo "$IP_ADDY $HOSTNAME" >> /etc/hosts
+
+docker login -u docker -p docker nexus3.onap.org:10001
+
+sudo apt-get install make -y
+
+sudo docker run -d --restart=unless-stopped -p 8080:8080 --name rancher_server rancher/server:v$RANCHER_VERSION
+sudo curl -LO https://storage.googleapis.com/kubernetes-release/release/v$KUBECTL_VERSION/bin/linux/amd64/kubectl
+sudo chmod +x ./kubectl
+sudo mv ./kubectl /usr/local/bin/kubectl
+sudo mkdir ~/.kube
+wget http://storage.googleapis.com/kubernetes-helm/helm-v${HELM_VERSION}-linux-amd64.tar.gz
+sudo tar -zxvf helm-v${HELM_VERSION}-linux-amd64.tar.gz
+sudo mv linux-amd64/helm /usr/local/bin/helm
+
+# nfs server
+sudo apt-get install nfs-kernel-server -y
+
+sudo mkdir -p /nfs_share
+sudo chown nobody:nogroup /nfs_share/
+
+
+exit 0
--- /dev/null
+#!/bin/bash
+
+usage () {
+ echo "Usage:"
+ echo " ./$(basename $0) nfs_master_ip"
+ exit 1
+}
+
+if [ "$#" -ne 1 ]; then
+ echo "Missing NFS mater node"
+ usage
+fi
+
+MASTER_IP=$1
+
+#Install NFS common
+sudo apt-get update
+sudo apt-get install -y nfs-common
+
+#Create NFS directory
+sudo mkdir -p /dockerdata-nfs
+
+#Mount the remote NFS directory to the local one
+sudo mount $MASTER_IP:/dockerdata-nfs /dockerdata-nfs/
+echo "$MASTER_IP:/dockerdata-nfs /dockerdata-nfs nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0" | sudo tee -a /etc/fstab
#################################################################
# application image
-image: onap/babel:1.2-STAGING-latest
+image: onap/babel:1.2.0
# application configuration
config:
#################################################################
# application image
-image: onap/champ:1.2-STAGING-latest
+image: onap/champ:1.2.3
# application configuration
config:
# application image
repository: nexus3.onap.org:10001
-image: onap/data-router:1.2-STAGING-latest
+image: onap/data-router:1.2.2
pullPolicy: Always
restartPolicy: Always
-<?xml version="1.0" encoding="UTF-8"?>
-<configuration scan="true" scanPeriod="3 seconds" debug="true">
- <!--<jmxConfigurator /> -->
- <!-- directory path for all other type logs -->
- <property name="logDir" value="/var/log/onap" />
- <property name="componentName" value="aai" />
- <property name="subComponentName" value="aai-CRUD" />
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <!-- default eelf log file names -->
- <property name="generalLogName" value="application" />
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <property name="pattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}\t[%thread]\t%-5level\t%logger\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- Example evaluator filter applied against console appender -->
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
- <!-- The EELFAppender is used to record events to the general application
+<configuration scan="true" scanPeriod="3 seconds" debug="false">
+ <!--<jmxConfigurator /> -->
+ <!-- directory path for all other type logs -->
+
+ <property name="logDir" value="/var/log/onap" />
+
+
+ <!-- specify the component name
+ <ECOMP-component-name>::= "MSO" | "DCAE" | "ASDC " | "AAI" |"Policy" | "SDNC" | "AC" -->
+ <property name="componentName" value="AAI-CRUD" />
+
+ <!-- default eelf log file names -->
+ <property name="generalLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="errorLogPattern" value="%d{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%mdc{RequestId}|%thread|GIZMO|%mdc{PartnerName}|%logger||%.-5level|%msg%n" />
+ <property name="auditMetricPattern" value="%m%n" />
+
+ <property name="logDirectory" value="${logDir}/${componentName}" />
+
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder>
+ <pattern>${errorLogPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <!-- ============================================================================ -->
+ <!-- EELF Appenders -->
+ <!-- ============================================================================ -->
+
+ <!-- The EELFAppender is used to record events to the general application
log -->
- <appender name="EELF" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${generalLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
- <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELF" />
- </appender>
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
+
+ <appender name="EELF"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${generalLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${errorLogPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELF" />
+ </appender>
+
+
+ <!-- EELF Audit Appender. This appender is used to record audit engine
+ related logging events. The audit logger and appender are specializations
+ of the EELF application root logger and appender. This can be used to segregate
+ Policy engine events from other components, or it can be eliminated to record
these events as part of the application root log. -->
- <appender name="EELFAudit" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
- <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics" />
- </appender>
- <appender name="EELFError" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- </appender>
- <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError" />
- </appender>
- <appender name="EELFDebug" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger name="com.att.eelf" level="info" additivity="false">
- <appender-ref ref="asyncEELF" />
- </logger>
- <logger name="com.att.eelf.security" level="info" additivity="false">
- <appender-ref ref="asyncEELFSecurity" />
- </logger>
- <logger name="com.att.eelf.perf" level="info" additivity="false">
- <appender-ref ref="asyncEELFPerformance" />
- </logger>
- <logger name="com.att.eelf.server" level="info" additivity="false">
- <appender-ref ref="asyncEELFServer" />
- </logger>
- <logger name="com.att.eelf.policy" level="info" additivity="false">
- <appender-ref ref="asyncEELFPolicy" />
- </logger>
- <logger name="com.att.eelf.debug" level="debug" additivity="false">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
- <logger name="com.att.eelf.audit" level="info" additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger name="com.att.eelf.metrics" level="info" additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger name="com.att.eelf.error" level="info" additivity="false">
- <appender-ref ref="asyncEELFError" />
- </logger>
- <!-- Spring related loggers -->
- <logger name="org.springframework" level="WARN" />
- <logger name="org.springframework.beans" level="WARN" />
- <logger name="org.springframework.web" level="WARN" />
- <logger name="com.blog.spring.jms" level="WARN" />
- <!-- AJSC Services (bootstrap services) -->
- <logger name="ajsc" level="WARN" />
- <logger name="ajsc.RouteMgmtService" level="WARN" />
- <logger name="ajsc.ComputeService" level="WARN" />
- <logger name="ajsc.VandelayService" level="WARN" />
- <logger name="ajsc.FilePersistenceService" level="WARN" />
- <logger name="ajsc.UserDefinedJarService" level="WARN" />
- <logger name="ajsc.UserDefinedBeansDefService" level="WARN" />
- <logger name="ajsc.LoggingConfigurationService" level="WARN" />
- <!-- AJSC related loggers (DME2 Registration, csi logging, restlet, servlet
- logging) -->
- <logger name="ajsc.utils" level="WARN" />
- <logger name="ajsc.utils.DME2Helper" level="WARN" />
- <logger name="ajsc.filters" level="WARN" />
- <logger name="ajsc.beans.interceptors" level="WARN" />
- <logger name="ajsc.restlet" level="WARN" />
- <logger name="ajsc.servlet" level="WARN" />
- <logger name="com.att" level="INFO" />
- <logger name="com.att.ajsc.csi.logging" level="WARN" />
- <logger name="com.att.ajsc.filemonitor" level="WARN" />
- <!-- CRUD Service loggers -->
- <logger name="org.openecomp.crud" level="INFO" />
- <!-- Other Loggers that may help troubleshoot -->
- <logger name="net.sf" level="WARN" />
- <logger name="org.apache" level="WARN" />
- <logger name="org.apache.commons.httpclient" level="WARN" />
- <logger name="org.apache.commons" level="WARN" />
- <logger name="org.apache.coyote" level="WARN" />
- <logger name="org.apache.jasper" level="WARN" />
- <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging.
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${auditMetricPattern}</pattern>
+ </encoder>
+ </appender>
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+ <appender name="EELFMetrics"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} -
+ %msg%n"</pattern> -->
+ <pattern>${auditMetricPattern}</pattern>
+ </encoder>
+ </appender>
+
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.log.zip
+ </fileNamePattern>
+ <maxHistory>60</maxHistory>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${errorLogPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>false</includeCallerData>
+ </appender>
+
+
+ <!-- ============================================================================ -->
+ <!-- EELF loggers -->
+ <!-- ============================================================================ -->
+ <logger name="com.att.eelf" level="info" additivity="false">
+ <appender-ref ref="asyncEELF" />
+ <appender-ref ref="asyncEELFDebug" />
+ </logger>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="WARN" />
+ <logger name="org.springframework.beans" level="WARN" />
+ <logger name="org.springframework.web" level="WARN" />
+ <logger name="com.blog.spring.jms" level="WARN" />
+
+ <!-- ARMAdapter Service loggers -->
+ <logger name="com.amdocs.aai.armadapter" level="INFO" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="net.sf" level="WARN" />
+ <logger name="org.apache" level="WARN" />
+ <logger name="org.apache.commons.httpclient" level="WARN" />
+ <logger name="org.apache.commons" level="WARN" />
+ <logger name="org.apache.coyote" level="WARN" />
+ <logger name="org.apache.jasper" level="WARN" />
+
+ <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging.
May aid in troubleshooting) -->
- <logger name="org.apache.camel" level="WARN" />
- <logger name="org.apache.cxf" level="WARN" />
- <logger name="org.apache.camel.processor.interceptor" level="WARN" />
- <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
- <logger name="org.apache.cxf.service" level="WARN" />
- <logger name="org.restlet" level="WARN" />
- <logger name="org.apache.camel.component.restlet" level="WARN" />
- <!-- logback internals logging -->
- <logger name="ch.qos.logback.classic" level="WARN" />
- <logger name="ch.qos.logback.core" level="WARN" />
- <root level="INFO">
- <appender-ref ref="asyncEELFDebug" />
- </root>
+ <logger name="org.apache.camel" level="WARN" />
+ <logger name="org.apache.cxf" level="WARN" />
+ <logger name="org.apache.camel.processor.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.service" level="WARN" />
+ <logger name="org.restlet" level="WARN" />
+ <logger name="org.apache.camel.component.restlet" level="WARN" />
+
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="WARN" />
+ <logger name="ch.qos.logback.core" level="WARN" />
+
+ <root>
+ <appender-ref ref="asyncEELF" />
+ <!-- <appender-ref ref="asyncEELFDebug" /> -->
+ </root>
+
</configuration>
#################################################################
# application image
-image: onap/gizmo:1.1-STAGING-latest
+image: onap/gizmo:1.2.1
# application configuration
config:
# application image
repository: nexus3.onap.org:10001
-image: onap/model-loader:1.2-STAGING-latest
+image: onap/model-loader:1.2.1
pullPolicy: Always
restartPolicy: Always
# application image
repository: nexus3.onap.org:10001
-image: onap/aai-resources:1.2-STAGING-latest
+image: onap/aai-resources:1.2.1
pullPolicy: Always
restartPolicy: Always
# application image
repository: nexus3.onap.org:10001
-image: onap/search-data-service:1.2-STAGING-latest
+image: onap/search-data-service:1.2.1
pullPolicy: Always
restartPolicy: Always
# application image
repository: nexus3.onap.org:10001
-image: onap/sparky-be:1.2-STAGING-latest
+image: onap/sparky-be:1.2.1
pullPolicy: Always
restartPolicy: Always
# application image
repository: nexus3.onap.org:10001
-image: onap/aai-traversal:1.2-STAGING-latest
+image: onap/aai-traversal:1.2.1
pullPolicy: Always
restartPolicy: Always
appcInstallEndTime=$(date +%s)
echo "Total Appc install took $(expr $appcInstallEndTime - $appcInstallStartTime) seconds"
+echo "Starting cdt-proxy-service jar, logging to ${APPC_HOME}/cdt-proxy-service/jar.log"
+java -jar ${APPC_HOME}/cdt-proxy-service/cdt-proxy-service.jar > ${APPC_HOME}/cdt-proxy-service/jar.log &
+
exec ${ODL_HOME}/bin/karaf
- port: {{ .Values.service.externalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
name: "{{ .Values.service.portName }}-1830"
+ - port: {{ .Values.service.externalPort3 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort3 }}
+ name: "{{ .Values.service.portName }}-9090"
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- port: {{ .Values.service.externalPort2 }}
targetPort: {{ .Values.service.internalPort2 }}
name: {{ .Values.service.portName }}-1830
+ - port: {{ .Values.service.externalPort3 }}
+ targetPort: {{ .Values.service.internalPort3 }}
+ name: {{ .Values.service.portName }}-9090
{{- end}}
selector:
app: {{ include "common.name" . }}
nodePort2: 31
clusterPort: 2550
+ internalPort3: 9191
+ externalPort3: 9090
+ nodePort3: 11
+
## Persist data to a persitent volume
persistence:
enabled: true
- mountPath: /usr/local/bin/aai_key.key
name: {{ .Values.global.commonConfigPrefix }}-config
subPath: aai_key.key
- - mountPath: /usr/local/bin/bundle.pem
+ - mountPath: /usr/local/bin/AAF_RootCA.cer
name: {{ .Values.global.commonConfigPrefix }}-config
- subPath: bundle.pem
+ subPath: AAF_RootCA.cer
resources:
{{ toYaml .Values.resources | indent 12 }}
{{- if .Values.nodeSelector }}
path: aai_cert.cer
- key: aai_key.key
path: aai_key.key
- - key: bundle.pem
- path: bundle.pem
+ - key: AAF_RootCA.cer
+ path: AAF_RootCA.cer
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
# Base URL for A&AI, up to and not including the version, and without a
# trailing slash. (string value)
-server_url = https://oof.api.simpledemo.onap.org:8443/aai
+server_url = https://{{.Values.config.aai.serviceName}}.{{ include "common.namespace" . }}:{{.Values.config.aai.port}}/aai
# The version of A&AI in v# format. (string value)
-server_url_version = v11
+server_url_version = v13
# SSL/TLS certificate file in pem format. This certificate must be registered
# with the A&AI endpoint. (string value)
-certificate_file = /usr/local/bin/aai_cert.cer
+certificate_file =
# Private Certificate Key file in pem format. (string value)
-certificate_key_file = /usr/local/bin/aai_key.key
+certificate_key_file =
# Certificate Authority Bundle file in pem format. Must contain the appropriate
# trust chain for the Certificate file. (string value)
#certificate_authority_bundle_file = /opt/app/conductor/etc/certs/ca_bundle.pem
-certificate_authority_bundle_file =/usr/local/bin/bundle.pem
+certificate_authority_bundle_file =/usr/local/bin/AAF_RootCA.cer
+
+# Basic Authentication Username (string value)
+username = OOF
+
+# Basic Authentication Password (string value)
+password = OOF
+
[api]
[reservation]
concurrent = true
+
+[multicloud]
+
+#
+# From conductor
+#
+
+# Base URL for Multicloud without a trailing slash. (string value)
+server_url = http://{{.Values.config.msb.serviceName}}:{{.Values.config.msb.port}}/api/multicloud
+
+# Timeout for Multicloud Rest Call (string value)
+multicloud_rest_timeout = 30
+
+# Number of retry for Multicloud Rest Call (string value)
+multicloud_retries = 3
+
+# The version of Multicloud API. (string value)
+server_url_version = v0
+
+
+[vim_controller]
+#
+# From conductor
+#
+
+# Extensions list to use (list value)
+extensions = multicloud
+
pullPolicy: Always
nodePortPrefix: 302
dataRootDir: /dockerdata-nfs
+config:
+ aai:
+ serviceName: aai
+ port: 8443
+ msb:
+ serviceName: msb-iag
+ port: 80
+
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# Credentials for the OOF placement service – SO. Newly added.
osdfPlacementSOUsername: {{ .Values.config.osdfPlacementSOUsername }}
osdfPlacementSOPassword: {{ .Values.config.osdfPlacementSOPassword }}
-# Credentials for the OOF CM scheduling service – Generic. Newly added
osdfCMSchedulerUsername: {{ .Values.config.osdfCMSchedulerUsername }}
osdfCMSchedulerPassword: {{ .Values.config.osdfCMSchedulerPassword }}
-# msoUrl: "" # The SO url for call back. This will be part of the request, so no need
soUsername: {{ .Values.config.soUsername }}
soPassword: {{ .Values.config.soPassword }}
-conductorUrl: "{{.Release.Name}}-has-api.{{include "common.namespace" .}}:TODO-PORT-FOR-HAS-API"
+conductorUrl: {{ .Values.config.conductorUrl }}
conductorUsername: {{ .Values.config.conductorUsername }}
conductorPassword: {{ .Values.config.conductorPassword }}
conductorPingWaitTime: {{ .Values.config.conductorPingWaitTime }}
conductorMaxRetries: {{ .Values.config.conductorMaxRetries }}
-# Policy Platform -- requires ClientAuth, Authorization, and Environment
policyPlatformUrl: {{ .Values.config.policyPlatformUrl }}
policyPlatformEnv: {{ .Values.config.policyPlatformEnv }}
policyPlatformUsername: {{ .Values.config.policyPlatformUsername }}
# application configuration
config:
- msbgateway: msb-iag.{{ include "common.namespace" . }}
+ msbgateway: msb-iag
msbPort: 80
# Credentials for the OOF placement service – SO.
osdfPlacementSOUsername: so_test
soUsername: "" # SO username for call back.
soPassword: "" # SO password for call back.
# Url and credentials for Conductor.
- conductorUrl: https://oof-has-api.{{ include "common.namespace" . }}:8091/v1/plans/
+ conductorUrl: http://oof-has-api:8091/v1/plans/
conductorUsername: admin1
conductorPassword: plan.15
conductorPingWaitTime: 60
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/policy-pe:1.2.2
+image: onap/policy-pe:1.2.3
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/policy-drools:1.2.2
+image: onap/policy-drools:1.2.3
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/policy-pe:1.2.2
+image: onap/policy-pe:1.2.3
pullPolicy: Always
# flag to enable debugging - application support required
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/policy-pe:1.2.2
+image: onap/policy-pe:1.2.3
pullPolicy: Always
subChartsOnly:
# Create VNIs 100-199
${SDNC_HOME}/bin/addVnis.sh 100 199
+
+# Drop FK_NETWORK_MODEL foreign key as workaround for SDNC-291.
+${SDNC_HOME}/bin/rmForeignKey.sh NETWORK_MODEL FK_NETWORK_MODEL
\ No newline at end of file
"sdncTimeoutFirewall": "20",
"callbackRetryAttempts": "30",
"callbackRetrySleepTime": "1000",
- "appcClientTopicRead": "APPC-LCM-READ",
- "appcClientTopicWrite": "APPC-LCM-WRITE",
- "appcClientTopicSdncRead": "SDNC-LCM-READ",
- "appcClientTopicSdncWrite": "SDNC-LCM-WRITE",
+ "appcClientTopicRead": "APPC-LCM-WRITE",
+ "appcClientTopicWrite": "APPC-LCM-READ",
+ "appcClientTopicSdncRead": "SDNC-LCM-WRITE",
+ "appcClientTopicSdncWrite": "SDNC-LCM-READ",
"appcClientTopicReadTimeout": "360000",
"appcClientResponseTime": "360000",
"appcClientPoolMembers": "{{.Values.config.messagerouter.serviceName}}:{{.Values.config.messagerouter.port}}",
Code Review / oom.git / commitdiff
