- type: cloudify.relationships.connected_to
target: k8s_env
- mock:
+ sniro-emulator:
type: cloudify.nodes.Helm
properties:
args:
- { get_input: namespace }
- - mock
+ - sniro-emulator
relationships:
- type: cloudify.relationships.connected_to
- target: k8s_env
\ No newline at end of file
+ target: k8s_env
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
###########################################################
# This Blueprint installs ONAP Message Router on Openstack
###########################################################
#!/bin/sh
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
#
PUBIP="$1"
PVTIP="$2"
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
###########################################################
# This Blueprint installs ONAP appc on Openstack
###########################################################
#!/bin/sh
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
#
PUBIP="$1"
PVTIP="$2"
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
###########################################################
# This Blueprint installs ONAP policy on Openstack
###########################################################
#!/bin/sh
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
#
PUBIP="$1"
PVTIP="$2"
#!/bin/sh
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
#
PUBIP="$1"
PVTIP="$2"
+# ============LICENSE_START==========================================
+# ===================================================================
+# Copyright (c) 2017 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#============LICENSE_END============================================
+
###########################################################
# This Blueprint installs ONAP SO on Openstack
###########################################################
ssh-authorized-keys:
- { get_secret: agent_key_public }
write_files:
+ - path: /etc/yum.repos.d/docker.repo
+ owner: root:root
+ permissions: '0444'
+ content: |
+ # installed by cloud-init
+ [dockerrepo]
+ name=Docker Repository
+ baseurl=https://yum.dockerproject.org/repo/main/centos/7
+ enabled=1
+ gpgcheck=1
+ gpgkey=https://yum.dockerproject.org/gpg
- path: /etc/yum.repos.d/kubernetes.repo
owner: root:root
permissions: '0444'
net.bridge.bridge-nf-call-iptables = 1
packages:
- - [docker, 1.12.6]
- - [kubelet, 1.8.6-0]
- - [kubeadm, 1.8.6-0]
- - [kubectl, 1.8.6-0]
+ - [docker-engine, 17.03.0.ce-1.el7.centos]
+ - [kubelet, 1.8.10-0]
+ - [kubeadm, 1.8.10-0]
+ - [kubectl, 1.8.10-0]
- [kubernetes-cni, 0.5.1-1]
- [nfs-utils]
- git
runcmd:
- [ setenforce, 0 ]
- [ sysctl , '--system' ]
+ - [ update-ca-trust, force-enable ]
+ - "sed -i 's|/usr/bin/dockerd|/usr/bin/dockerd --exec-opt native.cgroupdriver=systemd|g' /usr/lib/systemd/system/docker.service"
- [ systemctl, enable, docker ]
- [ systemctl, start, docker ]
+ - [ chmod, 655, /etc/systemd/system/kubelet.service ]
+ - [ chmod, 655, /etc/systemd/system/kubelet.service.d/10-kubeadm.conf ]
- [ systemctl, enable, kubelet ]
- [ systemctl, start, kubelet ]
+ - [ iptables, --flush ]
+ - [ iptables, -tnat, --flush ]
- [ mkdir, '-p', /tmp/data ]
- [ chcon, '-Rt', svirt_sandbox_file_t, /tmp/data ]
- [ mkdir, '-p', /dockerdata-nfs ]
helm_version:
description: helm version to be installed
- default: v2.7.0
+ default: v2.8.2
dsl_definitions:
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
# If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines.
# persistence:
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.1
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
persistence: {}
apiVersion: v1
kind: Service
metadata:
- name: {{ template "common.servicename" . }}
+ name: {{ include "common.servicename" . }}
namespace: {{ include "common.namespace" . }}
labels:
- app: {{ template "common.fullname" . }}
- chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
- release: "{{ .Release.Name }}"
- heritage: "{{ .Release.Service }}"
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
spec:
- clusterIP: None
type: {{ .Values.service.type }}
+# Not working, open k8s bug: https://github.com/kubernetes/kubernetes/issues/58662
+ publishNotReadyAddresses: true
ports:
- - name: cql
- port: {{ default 9042 .Values.config.ports.cql }}
- targetPort: {{ default 9042 .Values.config.ports.cql }}
- - name: thrift
- port: {{ default 9160 .Values.config.ports.thrift }}
- targetPort: {{ default 9160 .Values.config.ports.thrift }}
- {{- if .Values.config.ports.agent }}
- - name: agent
- port: {{ .Values.config.ports.agent }}
- targetPort: {{ .Values.config.ports.agent }}
- {{- end }}
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.portName3 }}
+ - port: {{ .Values.service.internalPort3 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort3 }}
+ name: {{ .Values.service.portName3 }}
+ {{- else -}}
+ - port: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName2 }}
+ - port: {{ .Values.service.internalPort3 }}
+ name: {{ .Values.service.portName3 }}
+ {{- end}}
selector:
- app: {{ template "common.fullname" . }}
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ clusterIP: None
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
spec:
- serviceName: {{ include "common.fullname" . }}
+ serviceName: {{ include "common.servicename" . }}
replicas: {{ .Values.replicaCount }}
podManagementPolicy: {{ .Values.podManagementPolicy }}
updateStrategy:
- containerPort: {{ .Values.service.internalPort }}
- containerPort: {{ .Values.service.internalPort2 }}
- containerPort: {{ .Values.service.internalPort3 }}
- - containerPort: {{ .Values.service.internalPort4 }}
{{- if eq .Values.liveness.enabled true }}
livenessProbe:
exec:
- name: HEAP_NEWSIZE
value: {{ .Values.config.heap.min }}
- name: CASSANDRA_SEEDS
- value: "{{- range $i, $e := until $seed_size }}{{ template "common.fullname" $global }}-{{ $i }},{{- end }}"
+ value: "{{- range $i, $e := until $seed_size }}{{ template "common.fullname" $global }}-{{ $i }}.{{ include "common.servicename" $global }},{{- end }}"
- name: JVM_OPTS
value: {{ .Values.config.jvmOpts | quote }}
- name: CASSANDRA_CLUSTER_NAME
service:
type: ClusterIP
name: aai-cassandra
- internalPort: 7000
- internalPort2: 7001
- internalPort3: 7199
- internalPort4: 9042
+ internalPort: 9042
+ portName: cql
+ internalPort2: 9160
+ portName2: thrift
+ internalPort3: 61621
+ portName3: agent
podManagementPolicy: OrderedReady
updateStrategy:
{{- $global := . }}
storage.backend=cassandra
-storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-aai-cassandra-{{ $i }},{{- end }}
+storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-{{$global.Values.global.cassandra.serviceName}}-{{ $i }}.{{$global.Values.global.cassandra.serviceName}},{{- end }}
storage.cassandra.keyspace=aaigraph
# the following parameters are not reloaded automatically and require a manual bounce
storage.backend=cassandra
-storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-aai-cassandra-{{ $i }},{{- end }}
-
+storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-{{$global.Values.global.cassandra.serviceName}}-{{ $i }}.{{$global.Values.global.cassandra.serviceName}},{{- end }}
storage.cassandra.keyspace=aaigraph
storage.cassandra.read-consistency-level=LOCAL_QUORUM
apiVersion: v1
kind: Service
metadata:
- name: {{ include "common.name" . }}
+ name: {{ include "common.servicename" . }}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
+ name: {{ .Values.service.portName }}
- port: {{ .Values.service.internalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
- name: {{ .Values.service.name }}2
+ name: {{ .Values.service.portName2 }}
{{- else -}}
- port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: {{ .Values.service.portName }}
- port: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name }}2
+ name: {{ .Values.service.portName2 }}
{{- end}}
selector:
app: {{ include "common.name" . }}
service:
type: ClusterIP
- name: aai-resources
+ portName: aai-resources-8447
internalPort: 8447
+ portName2: aai-resources-5005
internalPort2: 5005
{{- $global := . }}
storage.backend=cassandra
-storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-aai-cassandra-{{ $i }},{{- end }}
+storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-{{$global.Values.global.cassandra.serviceName}}-{{ $i }}.{{$global.Values.global.cassandra.serviceName}},{{- end }}
storage.cassandra.keyspace=aaigraph
# the following parameters are not reloaded automatically and require a manual bounce
storage.backend=cassandra
-storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-aai-cassandra-{{ $i }},{{- end }}
+storage.hostname={{- range $i, $e := until $seed_size }}{{ $global.Release.Name }}-{{$global.Values.global.cassandra.serviceName}}-{{ $i }}.{{$global.Values.global.cassandra.serviceName}},{{- end }}
storage.cassandra.keyspace=aaigraph
apiVersion: v1
kind: Service
metadata:
- name: {{ include "common.name" . }}
+ name: {{ include "common.servicename" . }}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
+ name: {{ .Values.service.portName }}
- port: {{ .Values.service.internalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
- name: {{ .Values.service.name }}2
+ name: {{ .Values.service.portName2 }}
{{- else -}}
- port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: {{ .Values.service.portName }}
- port: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name }}2
+ name: {{ .Values.service.portName2 }}
{{- end}}
selector:
app: {{ include "common.name" . }}
service:
type: ClusterIP
- name: aai-traversal
+ portName: aai-traversal-8446
internalPort: 8446
+ portName2: aai-traversal-5005
internalPort2: 5005
ingress:
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+description: ONAP Clamp Dashboard Elasticsearch
+name: clamp-dash-es
+version: 2.0.0
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
-nsPrefix: onap
-pullPolicy: Always
-nodePortPrefix: 302
-image:
- onapmock: nexus3.onap.org:10001/onap/sniroemulator
- tag: latest
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+# ======================== Elasticsearch Configuration =========================
+#
+# NOTE: Elasticsearch comes with reasonable defaults for most settings.
+# Before you set out to tweak and tune the configuration, make sure you
+# understand what are you trying to accomplish and the consequences.
+#
+# The primary way of configuring a node is via this file. This template lists
+# the most important settings you may want to configure for a production cluster.
+#
+# Please consult the documentation for further information on configuration options:
+# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
+#
+# ---------------------------------- Cluster -----------------------------------
+#
+# Name of the Elasticsearch cluster.
+# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster.
+# The default name is elasticsearch, but you should change it to an appropriate name which describes the
+# purpose of the cluster.
+#
+cluster.name: "clamp-dashboard"
+#
+# The port that other nodes in the cluster should use when communicating with this node.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_port:$transport.publish_port
+#
+# The host address to publish for nodes in the cluster to connect to.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_host:$transport.publish_host
+#
+# ------------------------------------ Node ------------------------------------
+#
+# It is better to provide different meaningfull names fot different elastic nodes.
+# By default, Elasticsearch will take the 7 first character of the randomly generated uuid used as the node id.
+# Note that the node id is persisted and does not change when a node restarts
+#
+#node.name: $node.name
+#
+# Add custom attributes to the node:
+#
+#node.attr.rack: r1
+#
+# ----------------------------------- Paths ------------------------------------
+#
+# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma.
+# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure
+# may change & can deal to data loss.
+path.data: /usr/share/elasticsearch/data
+#
+# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs",
+# as on upgrading Elasticsearch, directory structure may change.
+path.logs: /usr/share/elasticsearch/logs
+#
+# ----------------------------------- Memory -----------------------------------
+#
+# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk.
+# Lock the memory on startup.
+#
+bootstrap.memory_lock: false
+#
+# Make sure that the heap size is set to about half the memory available
+# on the system and that the owner of the process is allowed to use this
+# limit.
+#
+# Elasticsearch performs poorly when the system is swapping the memory.
+#
+# ---------------------------------- Network -----------------------------------
+#
+# Set the bind address to a specific IP (IPv4 or IPv6):
+# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a
+# non-loopback address.
+network.host: 0.0.0.0
+#
+# Set a custom port for HTTP: If required, default is 9200-9300
+#
+#http.port: $http.port
+#
+# For more information, consult the network module documentation.
+#
+# --------------------------------- Discovery ----------------------------------
+#
+# Pass an initial list of hosts to perform discovery when new node is started
+# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster
+# that are likely to be live and contactable.
+# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try
+# to connect to other nodes running on the same server.
+#
+#discovery.zen.ping.unicast.hosts: ["elasticsearch.{{.Values.nsPrefix}}"
+#$discovery.zen.ping.unicast.hosts
+#
+# This setting tells Elasticsearch to not elect a master unless there are enough master-eligible nodes
+# available. Only then will an election take place.
+# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
+discovery.zen.minimum_master_nodes: 1
+#
+# For more information, consult the zen discovery module documentation.
+#
+# ---------------------------------- Gateway -----------------------------------
+#
+# Block initial recovery after a full cluster restart until N nodes are started:
+#
+#gateway.recover_after_nodes: 3
+#
+# For more information, consult the gateway module documentation.
+#
+# ---------------------------------- Various -----------------------------------
+#
+# Require explicit names when deleting indices:
+#
+#action.destructive_requires_name: true
+# Set a custom port for HTTP: If required, default is 9200-9300
+# This is used for REST APIs
+http.port: {{.Values.service.externalPort}}
+# Port to bind for communication between nodes. Accepts a single value or a range.
+# If a range is specified, the node will bind to the first available port in the range.
+# Defaults to 9300-9400.
+# More info:
+transport.tcp.port: {{.Values.service.externalPort2}}
+
+xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+
+xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+
+xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+
+xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+
+xpack.watcher.enabled: false
+#Set to false to disable Watcher.
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
-#{{ if not .Values.disableMockSniroEmulator }}
apiVersion: v1
-kind: Service
+kind: ConfigMap
metadata:
- name: sniro-emulator
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: sniro-emulator
-spec:
- type: NodePort
- ports:
- - port: 80
- nodePort: {{ .Values.nodePortPrefix }}88
- targetPort: 9999
- protocol: TCP
- name: http
- selector:
- app: sniro-emulator
-#{{ end }}
\ No newline at end of file
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /bin/sh
+ - -c
+ - |
+ sysctl -w vm.max_map_count=262144
+ mkdir -p /usr/share/elasticsearch/logs
+ mkdir -p /usr/share/elasticsearch/data
+ chmod -R 777 /usr/share/elasticsearch
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ securityContext:
+ privileged: true
+ image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: init-sysctl
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /usr/share/elasticsearch/logs/
+ - name: {{ include "common.fullname" . }}-data
+ mountPath: /usr/share/elasticsearch/data/
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ include "common.servicename" . }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ name: {{ include "common.servicename" . }}2
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort2 }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
+ name: {{ include "common.fullname" . }}-config
+ subPath: elasticsearch.yml
+ - mountPath: /usr/share/elasticsearch/data/
+ name: {{ include "common.fullname" . }}-data
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ items:
+ - key: elasticsearch.yml
+ path: elasticsearch.yml
+ - name: {{ include "common.fullname" . }}-data
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ - name: {{ include "common.fullname" . }}-logs
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPathLogs }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
--- /dev/null
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- end -}}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.config.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.config.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}-tcp
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type2 }}
+ ports:
+ {{if eq .Values.service.type2 "NodePort" -}}
+ - port: {{ .Values.service.externalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.config.portName2 }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.config.portName2 }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+loggingRepository: docker.elastic.co
+image: elasticsearch/elasticsearch:5.6.8
+pullPolicy: IfNotPresent
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ accessMode: ReadWriteMany
+ size: 4Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: clamp/dashboard-elasticsearch/data
+
+service:
+ type: ClusterIP
+ name: cdash-es
+ portName: cdash-es-rest
+ externalPort: 9200
+ internalPort: 9200
+ type2: ClusterIP
+ portName2: cdash-es-tcp
+ externalPort2: 9300
+ internalPort2: 9300
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+description: ONAP Clamp Dashboard Kibana
+name: clamp-dash-kibana
+version: 2.0.0
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
-apiVersion: v1
-description: A Helm chart for Kubernetes
-name: mock
-version: 0.1.0
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+{"_index":".kibana","_type":"visualization","_id":"AWI967sW8kHy-lwNJZrR","_score":1,"_source":{"title":"CL Total Activity","visState":"{\"title\":\"CL Total Activity\",\"type\":\"table\",\"params\":{\"perPage\":10,\"showPartialRows\":false,\"showMeticsAtAllLevels\":false,\"sort\":{\"columnIndex\":null,\"direction\":null},\"showTotal\":false,\"totalFunc\":\"sum\",\"type\":\"table\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"sum\",\"schema\":\"metric\",\"params\":{\"field\":\"eventDuration\"}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}","description":"","savedSearchId":"AWIk9P-qDjJ4k3sPXRcQ","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"index-pattern","_id":"AWIk7j2UDjJ4k3sPXRaY","_score":1,"_source":{"title":"logstash-*","timeFieldName":"closedLoopAlarmStart","notExpandable":true,"fields":"[{\"name\":\"@timestamp\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"@version\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"@version.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.cloud-region.identity-url\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.cloud-region.identity-url.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.complex.physical-location-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.complex.physical-location-id.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.generic-vnf.service-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.generic-vnf.service-id.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.generic-vnf.vnf-name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.generic-vnf.vnf-name.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.tenant.tenant-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.tenant.tenant-id.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.vserver.is-closed-loop-disabled\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.vserver.is-closed-loop-disabled.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.vserver.prov-status\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.vserver.prov-status.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.vserver.vserver-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.vserver.vserver-id.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.vserver.vserver-name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.vserver.vserver-name.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"AAI.vserver.vserver-selflink\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"AAI.vserver.vserver-selflink.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"OPS_CL_timer\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"_id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"_index\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"_score\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":false,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"_source\",\"type\":\"_source\",\"count\":0,\"scripted\":false,\"searchable\":false,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"_type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"closedLoopAlarmEnd\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"closedLoopAlarmStart\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"closedLoopControlName\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"closedLoopControlName.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"closedLoopEventClient\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"closedLoopEventClient.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"closedLoopEventStatus\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"closedLoopEventStatus.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"from\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"from.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.actor\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"history.actor.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.end\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.message\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"history.message.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.operation\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"history.operation.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.outcome\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"history.outcome.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.start\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.subRequestId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"history.subRequestId.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"history.target\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"history.target.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"notification\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"notification.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"notificationTime\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"policyName\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"policyName.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"policyScope\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"policyScope.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"policyVersion\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"policyVersion.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"requestID\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"requestID.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"target\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"target.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"target_type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"target_type.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"version\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"version.keyword\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"eventDuration\",\"type\":\"number\",\"count\":0,\"scripted\":true,\"script\":\"if (doc.containsKey('closedLoopEventStatus') && doc.get('closedLoopEventStatus.keyword').value == 'ABATED') { \\n return doc.get('closedLoopAlarmEnd').value- doc.get('closedLoopAlarmStart').value; \\n} \\nreturn null\",\"lang\":\"painless\",\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false}]","fieldFormatMap":"{\"eventDuration\":{\"id\":\"duration\",\"params\":{\"inputFormat\":\"milliseconds\"}}}"}}
+{"_index":".kibana","_type":"visualization","_id":"AWIk-5O-DjJ4k3sPXRd1","_score":1,"_source":{"title":"ClosedLoopActivationsTable","visState":"{\"title\":\"ClosedLoopActivationsTable\",\"type\":\"table\",\"params\":{\"perPage\":10,\"showPartialRows\":false,\"showMeticsAtAllLevels\":true,\"sort\":{\"columnIndex\":null,\"direction\":null},\"showTotal\":false,\"totalFunc\":\"sum\",\"type\":\"table\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"count\",\"schema\":\"metric\",\"params\":{}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}","description":"","savedSearchId":"AWIk8yDIDjJ4k3sPXRbu","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"search","_id":"AWIk9P-qDjJ4k3sPXRcQ","_score":1,"_source":{"title":"ABATED","description":"","columns":["closedLoopAlarmStart","closedLoopAlarmEnd","closedLoopControlName","closedLoopEventStatus","notification"],"sort":["closedLoopAlarmStart","desc"],"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"highlightAll\":true,\"version\":true,\"query\":{\"query_string\":{\"query\":\"closedLoopEventStatus: \\\"ABATED\\\"\",\"analyze_wildcard\":true}},\"filter\":[{\"meta\":{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"negate\":false,\"disabled\":false,\"alias\":\"ABATED\",\"type\":\"phrase\",\"key\":\"closedLoopEventStatus.keyword\",\"value\":\"ABATED\"},\"query\":{\"match\":{\"closedLoopEventStatus.keyword\":{\"query\":\"ABATED\",\"type\":\"phrase\"}}},\"$state\":{\"store\":\"appState\"}},{\"meta\":{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"negate\":false,\"disabled\":true,\"alias\":\"ONSET\",\"type\":\"phrase\",\"key\":\"closedLoopEventStatus.keyword\",\"value\":\"ONSET\"},\"query\":{\"match\":{\"closedLoopEventStatus.keyword\":{\"query\":\"ONSET\",\"type\":\"phrase\"}}},\"$state\":{\"store\":\"appState\"}}]}"}}}
+{"_index":".kibana","_type":"config","_id":"5.6.7","_score":1,"_source":{"buildNum":15610,"defaultIndex":"AWIk7j2UDjJ4k3sPXRaY"}}
+{"_index":".kibana","_type":"visualization","_id":"AWIlBLT7DjJ4k3sPXRe7","_score":1,"_source":{"title":"Closed loop failed action : needs attention","visState":"{\"title\":\"Closed loop failed action : needs attention\",\"type\":\"table\",\"params\":{\"perPage\":5,\"showMeticsAtAllLevels\":false,\"showPartialRows\":false,\"showTotal\":false,\"sort\":{\"columnIndex\":null,\"direction\":null},\"totalFunc\":\"sum\",\"type\":\"table\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"count\",\"schema\":\"metric\",\"params\":{}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}","description":"","savedSearchId":"AWIlAjTaDjJ4k3sPXRe1","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWI91Rvl8kHy-lwNJZrN","_score":1,"_source":{"title":"CL efficiency - CL reponse time","visState":"{\"title\":\"CL efficiency - CL reponse time\",\"type\":\"table\",\"params\":{\"perPage\":10,\"showPartialRows\":false,\"showMeticsAtAllLevels\":false,\"sort\":{\"columnIndex\":null,\"direction\":null},\"showTotal\":false,\"totalFunc\":\"sum\",\"type\":\"table\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"avg\",\"schema\":\"metric\",\"params\":{\"field\":\"eventDuration\"}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}","description":"","savedSearchId":"AWIk9P-qDjJ4k3sPXRcQ","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWJxqD67B2zw2CQxMIeq","_score":1,"_source":{"title":"Top Error Messages","visState":"{\"title\":\"Top Error Messages\",\"type\":\"table\",\"params\":{\"perPage\":10,\"showPartialRows\":false,\"showMeticsAtAllLevels\":false,\"sort\":{\"columnIndex\":null,\"direction\":null},\"showTotal\":false,\"totalFunc\":\"sum\",\"type\":\"table\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"count\",\"schema\":\"metric\",\"params\":{}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"history.actor.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\",\"customLabel\":\"Actor\"}},{\"id\":\"3\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"history.message.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\",\"customLabel\":\"Message\"}},{\"id\":\"4\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"history.operation.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\",\"customLabel\":\"Operation\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}","description":"","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"query\":{\"match_all\":{}},\"filter\":[]}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWI922pp8kHy-lwNJZrP","_score":1,"_source":{"title":"CLEventDurationTables","visState":"{\"title\":\"CLEventDurationTables\",\"type\":\"table\",\"params\":{\"perPage\":10,\"showPartialRows\":false,\"showMeticsAtAllLevels\":false,\"sort\":{\"columnIndex\":null,\"direction\":null},\"showTotal\":false,\"totalFunc\":\"sum\",\"type\":\"table\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"max\",\"schema\":\"metric\",\"params\":{\"field\":\"eventDuration\",\"customLabel\":\"Event Duration\"}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"split\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"_term\",\"row\":true}},{\"id\":\"3\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"requestID.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"_term\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}","description":"","savedSearchId":"AWIk9P-qDjJ4k3sPXRcQ","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWIk_VLEDjJ4k3sPXReS","_score":1,"_source":{"title":"Top 5 closed loop success action","visState":"{\"title\":\"Top 5 closed loop success action\",\"type\":\"table\",\"params\":{\"perPage\":10,\"showPartialRows\":false,\"showMeticsAtAllLevels\":false,\"sort\":{\"columnIndex\":null,\"direction\":null},\"showTotal\":true,\"totalFunc\":\"sum\",\"type\":\"table\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"count\",\"schema\":\"metric\",\"params\":{}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"bucket\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}","description":"","savedSearchId":"AWIk9P-qDjJ4k3sPXRcQ","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWJoFDTyr1AwiIiFoV5R","_score":1,"_source":{"title":"Hottest closed loops","visState":"{\"title\":\"Hottest closed loops\",\"type\":\"pie\",\"params\":{\"addTooltip\":true,\"addLegend\":true,\"legendPosition\":\"right\",\"isDonut\":false,\"type\":\"pie\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"count\",\"schema\":\"metric\",\"params\":{}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"segment\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"legendOpen\":true}}","description":"","savedSearchId":"AWIk8yDIDjJ4k3sPXRbu","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"search","_id":"AWJsTEvYr1AwiIiFoV6S","_score":1,"_source":{"title":"FINAL: FAILURE","description":"","columns":["notification"],"sort":["closedLoopAlarmStart","desc"],"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"highlightAll\":true,\"version\":true,\"query\":{\"match_all\":{}},\"filter\":[{\"meta\":{\"negate\":false,\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"type\":\"phrase\",\"key\":\"notification\",\"value\":\"FINAL: FAILURE\",\"disabled\":false,\"alias\":null},\"query\":{\"match\":{\"notification\":{\"query\":\"FINAL: FAILURE\",\"type\":\"phrase\"}}},\"$state\":{\"store\":\"appState\"}}]}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWJsT-HUr1AwiIiFoV6T","_score":1,"_source":{"title":"CL Efficiency - Failed actions","visState":"{\"title\":\"CL Efficiency - Failed actions\",\"type\":\"gauge\",\"params\":{\"addLegend\":true,\"addTooltip\":true,\"gauge\":{\"backStyle\":\"Full\",\"colorSchema\":\"Green to Red\",\"colorsRange\":[{\"from\":0,\"to\":4},{\"from\":4,\"to\":6},{\"from\":7,\"to\":10}],\"extendRange\":false,\"gaugeColorMode\":\"Labels\",\"gaugeStyle\":\"Full\",\"gaugeType\":\"Arc\",\"invertColors\":false,\"labels\":{\"color\":\"black\",\"show\":true},\"orientation\":\"vertical\",\"percentageMode\":false,\"scale\":{\"color\":\"#333\",\"labels\":false,\"show\":true},\"style\":{\"bgColor\":false,\"bgFill\":\"#eee\",\"bgMask\":false,\"bgWidth\":0.9,\"fontSize\":60,\"labelColor\":true,\"mask\":false,\"maskBars\":50,\"subText\":\"\",\"width\":0.9},\"type\":\"meter\",\"verticalSplit\":true},\"isDisplayWarning\":true,\"type\":\"gauge\"},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"count\",\"schema\":\"metric\",\"params\":{}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"group\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"1\"}}],\"listeners\":{}}","uiStateJSON":"{\"vis\":{\"defaultColors\":{\"0 - 4\":\"rgb(0,104,55)\",\"4 - 6\":\"rgb(255,255,190)\",\"7 - 10\":\"rgb(165,0,38)\"}}}","description":"","savedSearchId":"AWJsTEvYr1AwiIiFoV6S","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWJoJdIjr1AwiIiFoV5T","_score":1,"_source":{"title":"CL Onset/Abated Variance","visState":"{\"title\":\"CL Onset/Abated Variance\",\"type\":\"histogram\",\"params\":{\"grid\":{\"categoryLines\":false,\"style\":{\"color\":\"#eee\"}},\"categoryAxes\":[{\"id\":\"CategoryAxis-1\",\"type\":\"category\",\"position\":\"left\",\"show\":true,\"style\":{},\"scale\":{\"type\":\"linear\"},\"labels\":{\"show\":true,\"rotate\":0,\"filter\":false,\"truncate\":200},\"title\":{\"text\":\"Closed Loop\"}}],\"valueAxes\":[{\"id\":\"ValueAxis-3\",\"name\":\"BottomAxis-1\",\"type\":\"value\",\"position\":\"bottom\",\"show\":true,\"style\":{},\"scale\":{\"type\":\"linear\",\"mode\":\"normal\"},\"labels\":{\"show\":true,\"rotate\":75,\"filter\":true,\"truncate\":100},\"title\":{\"text\":\"Count\"}}],\"seriesParams\":[{\"show\":true,\"type\":\"histogram\",\"mode\":\"normal\",\"data\":{\"label\":\"Count\",\"id\":\"1\"},\"valueAxis\":\"ValueAxis-3\",\"drawLinesBetweenPoints\":true,\"showCircles\":true}],\"addTooltip\":true,\"addLegend\":true,\"legendPosition\":\"right\",\"times\":[],\"addTimeMarker\":false,\"type\":\"horizontal_bar\",\"radiusRatio\":\"13\",\"orderBucketsBySum\":false},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"count\",\"schema\":\"metric\",\"params\":{}},{\"id\":\"2\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"segment\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"_term\",\"customLabel\":\"Closed Loop\"}},{\"id\":\"3\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"group\",\"params\":{\"field\":\"closedLoopEventStatus.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"_term\"}}],\"listeners\":{}}","uiStateJSON":"{}","description":"","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"query\":{\"match_all\":{}},\"filter\":[]}"}}}
+{"_index":".kibana","_type":"search","_id":"AWIlAjTaDjJ4k3sPXRe1","_score":1,"_source":{"title":"FAILURE NOTIFICATION","description":"","columns":["closedLoopAlarmStart","closedLoopAlarmEnd","closedLoopControlName","closedLoopEventStatus","notification"],"sort":["closedLoopAlarmStart","desc"],"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"highlightAll\":true,\"version\":true,\"query\":{\"match_all\":{}},\"filter\":[{\"$state\":{\"store\":\"appState\"},\"meta\":{\"alias\":\"ABATED\",\"disabled\":true,\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"key\":\"closedLoopEventStatus.keyword\",\"negate\":false,\"type\":\"phrase\",\"value\":\"ABATED\"},\"query\":{\"match\":{\"closedLoopEventStatus.keyword\":{\"query\":\"ABATED\",\"type\":\"phrase\"}}}},{\"$state\":{\"store\":\"appState\"},\"meta\":{\"alias\":\"ONSET\",\"disabled\":true,\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"key\":\"closedLoopEventStatus.keyword\",\"negate\":false,\"type\":\"phrase\",\"value\":\"ONSET\"},\"query\":{\"match\":{\"closedLoopEventStatus.keyword\":{\"query\":\"ONSET\",\"type\":\"phrase\"}}}},{\"$state\":{\"store\":\"appState\"},\"meta\":{\"alias\":\"FAILURE NOTIFICATION\",\"disabled\":false,\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"key\":\"notification.keyword\",\"negate\":false,\"type\":\"phrase\",\"value\":\"FINAL: FAILURE\"},\"query\":{\"match\":{\"notification.keyword\":{\"query\":\"FINAL: FAILURE\",\"type\":\"phrase\"}}}}]}"}}}
+{"_index":".kibana","_type":"search","_id":"AWIk8yDIDjJ4k3sPXRbu","_score":1,"_source":{"title":"ONSET","description":"","columns":["closedLoopAlarmStart","closedLoopAlarmEnd","closedLoopControlName","closedLoopEventStatus","notification"],"sort":["closedLoopAlarmStart","desc"],"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"highlightAll\":true,\"version\":true,\"query\":{\"match_all\":{}},\"filter\":[{\"meta\":{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"negate\":false,\"disabled\":false,\"alias\":null,\"type\":\"phrase\",\"key\":\"closedLoopEventStatus.keyword\",\"value\":\"ONSET\"},\"query\":{\"match\":{\"closedLoopEventStatus.keyword\":{\"query\":\"ONSET\",\"type\":\"phrase\"}}},\"$state\":{\"store\":\"appState\"}}]}"}}}
+{"_index":".kibana","_type":"dashboard","_id":"AWI-9KyytmDBG_mksMZL","_score":1,"_source":{"title":"CLAMP Dashboard","description":"","panelsJSON":"[{\"col\":5,\"id\":\"AWIk_VLEDjJ4k3sPXReS\",\"panelIndex\":1,\"row\":1,\"size_x\":4,\"size_y\":3,\"type\":\"visualization\"},{\"col\":9,\"id\":\"AWIlBLT7DjJ4k3sPXRe7\",\"panelIndex\":2,\"row\":1,\"size_x\":4,\"size_y\":3,\"type\":\"visualization\"},{\"col\":1,\"id\":\"AWI967sW8kHy-lwNJZrR\",\"panelIndex\":3,\"row\":7,\"size_x\":5,\"size_y\":3,\"type\":\"visualization\"},{\"col\":1,\"id\":\"AWI91Rvl8kHy-lwNJZrN\",\"panelIndex\":4,\"row\":4,\"size_x\":5,\"size_y\":3,\"type\":\"visualization\"},{\"col\":1,\"id\":\"AWJoFDTyr1AwiIiFoV5R\",\"panelIndex\":5,\"row\":1,\"size_x\":4,\"size_y\":3,\"type\":\"visualization\"},{\"col\":9,\"id\":\"AWJoJdIjr1AwiIiFoV5T\",\"panelIndex\":6,\"row\":7,\"size_x\":4,\"size_y\":3,\"type\":\"visualization\"},{\"col\":9,\"id\":\"AWJoMx0_r1AwiIiFoV5V\",\"panelIndex\":7,\"row\":4,\"size_x\":4,\"size_y\":3,\"type\":\"visualization\"},{\"col\":6,\"id\":\"AWJsT-HUr1AwiIiFoV6T\",\"panelIndex\":8,\"row\":4,\"size_x\":3,\"size_y\":6,\"type\":\"visualization\"},{\"size_x\":6,\"size_y\":3,\"panelIndex\":9,\"type\":\"visualization\",\"id\":\"AWJxqD67B2zw2CQxMIeq\",\"col\":1,\"row\":10}]","optionsJSON":"{\"darkTheme\":false}","uiStateJSON":"{\"P-1\":{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}},\"P-2\":{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}},\"P-3\":{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}},\"P-4\":{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}},\"P-6\":{\"vis\":{\"legendOpen\":true}},\"P-8\":{\"vis\":{\"defaultColors\":{\"0 - 4\":\"rgb(0,104,55)\",\"4 - 6\":\"rgb(255,255,190)\",\"7 - 10\":\"rgb(165,0,38)\"},\"legendOpen\":false}},\"P-9\":{\"vis\":{\"params\":{\"sort\":{\"columnIndex\":null,\"direction\":null}}}}}","timeRestore":false,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[{\"query\":{\"match_all\":{}}}],\"highlightAll\":true,\"version\":true}"}}}
+{"_index":".kibana","_type":"visualization","_id":"AWJoMx0_r1AwiIiFoV5V","_score":1,"_source":{"title":"CL Efficiency - Total Activity","visState":"{\"title\":\"CL Efficiency - Total Activity\",\"type\":\"line\",\"params\":{\"addLegend\":true,\"addTimeMarker\":false,\"addTooltip\":true,\"categoryAxes\":[{\"id\":\"CategoryAxis-1\",\"labels\":{\"show\":true,\"truncate\":100},\"position\":\"bottom\",\"scale\":{\"type\":\"linear\"},\"show\":true,\"style\":{},\"title\":{\"text\":\"closedLoopAlarmStart per 10 seconds\"},\"type\":\"category\"}],\"grid\":{\"categoryLines\":false,\"style\":{\"color\":\"#eee\"}},\"legendPosition\":\"right\",\"seriesParams\":[{\"data\":{\"id\":\"1\",\"label\":\"Sum of eventDuration\"},\"drawLinesBetweenPoints\":true,\"interpolate\":\"cardinal\",\"lineWidth\":2,\"mode\":\"normal\",\"show\":\"true\",\"showCircles\":true,\"type\":\"line\",\"valueAxis\":\"ValueAxis-1\"}],\"times\":[],\"type\":\"line\",\"valueAxes\":[{\"id\":\"ValueAxis-1\",\"labels\":{\"filter\":false,\"rotate\":0,\"show\":true,\"truncate\":100},\"name\":\"LeftAxis-1\",\"position\":\"left\",\"scale\":{\"defaultYExtents\":true,\"mode\":\"normal\",\"setYExtents\":false,\"type\":\"linear\"},\"show\":true,\"style\":{},\"title\":{\"text\":\"Sum of eventDuration\"},\"type\":\"value\"}]},\"aggs\":[{\"id\":\"1\",\"enabled\":true,\"type\":\"sum\",\"schema\":\"metric\",\"params\":{\"field\":\"eventDuration\"}},{\"id\":\"3\",\"enabled\":true,\"type\":\"terms\",\"schema\":\"group\",\"params\":{\"field\":\"closedLoopControlName.keyword\",\"size\":5,\"order\":\"desc\",\"orderBy\":\"_term\"}},{\"id\":\"2\",\"enabled\":true,\"type\":\"date_histogram\",\"schema\":\"segment\",\"params\":{\"field\":\"closedLoopAlarmStart\",\"interval\":\"auto\",\"customInterval\":\"2h\",\"min_doc_count\":0,\"extended_bounds\":{}}}],\"listeners\":{}}","uiStateJSON":"{}","description":"","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"query\":{\"match_all\":{}},\"filter\":[{\"meta\":{\"index\":\"AWIk7j2UDjJ4k3sPXRaY\",\"negate\":false,\"disabled\":false,\"alias\":null,\"type\":\"exists\",\"key\":\"closedLoopAlarmEnd\",\"value\":\"exists\"},\"exists\":{\"field\":\"closedLoopAlarmEnd\"},\"$state\":{\"store\":\"appState\"}}]}"}}}
--- /dev/null
+xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+xpack.reporting.enabled: false
+#Set to false to disable X-Pack reporting features.
+xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+xpack.watcher.enabled: false
+#Set to false to disable Watcher.
+# Kibana is served by a back end server. This setting specifies the port to use.
+server.port: {{.Values.service.externalPort}}
+
+# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
+# The default is 'localhost', which usually means remote machines will not be able to connect.
+# To allow connections from remote users, set this parameter to a non-loopback address.
+server.host: "0.0.0.0"
+
+# Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects
+# the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests
+# to Kibana. This setting cannot end in a slash.
+#server.basePath: ""
+
+# The maximum payload size in bytes for incoming server requests.
+#server.maxPayloadBytes: 1048576
+
+# The Kibana server's name. This is used for display purposes.
+server.name: "Clamp Dashboard"
+
+# The URL of the Elasticsearch instance to use for all your queries.
+elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}"
+# When this setting's value is true Kibana uses the hostname specified in the server.host
+# setting. When the value of this setting is false, Kibana uses the hostname of the host
+# that connects to this Kibana instance.
+#elasticsearch.preserveHost: true
+
+# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
+# dashboards. Kibana creates a new index if the index doesn't already exist.
+#kibana.index: ".kibana"
+
+# The default application to load.
+#kibana.defaultAppId: "discover"
+
+# If your Elasticsearch is protected with basic authentication, these settings provide
+# the username and password that the Kibana server uses to perform maintenance on the Kibana
+# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
+# is proxied through the Kibana server.
+#elasticsearch.username: "elastic"
+#elasticsearch.password: "changeme"
+# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
+# These settings enable SSL for outgoing requests from the Kibana server to the browser.
+#server.ssl.enabled: $server_ssl_enabled
+#server.ssl.certificate: $server_ssl_certificate
+#server.ssl.key: $server_ssl_key
+
+# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
+# These files validate that your Elasticsearch backend uses the same key files.
+#elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate
+#elasticsearch.ssl.key: $elasticsearch_ssl_key
+
+# Optional setting that enables you to specify a path to the PEM file for the certificate
+# authority for your Elasticsearch instance.
+#elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities
+
+# To disregard the validity of SSL certificates, change this setting's value to 'none'.
+#elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode
+
+# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
+# the elasticsearch.requestTimeout setting.
+#elasticsearch.pingTimeout: 1500
+
+# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
+# must be a positive integer.
+#elasticsearch.requestTimeout: 30000
+
+# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
+# headers, set this value to [] (an empty list).
+#elasticsearch.requestHeadersWhitelist: [ authorization ]
+
+# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
+# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
+#elasticsearch.customHeaders: {}
+
+# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
+#elasticsearch.shardTimeout: 0
+
+# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
+#elasticsearch.startupTimeout: 5000
+
+# Specifies the path where Kibana creates the process ID file.
+#pid.file: /var/run/kibana.pid
+
+# Enables you specify a file where Kibana stores log output.
+#logging.dest: stdout
+
+# Set the value of this setting to true to suppress all logging output.
+#logging.silent: false
+
+# Set the value of this setting to true to suppress all logging output other than error messages.
+#logging.quiet: false
+
+# Set the value of this setting to true to log all events, including system usage information
+# and all requests.
+#logging.verbose: false
+
+# Set the interval in milliseconds to sample system and process performance
+# metrics. Minimum is 100ms. Defaults to 5000.
+#ops.interval: 5000
+
+# The default locale. This locale can be used in certain circumstances to substitute any missing
+# translations.
+#i18n.defaultLocale: "en"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - clamp-dash-es
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ - args:
+ - --output=http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}/.kibana
+ - --input=/config/default.json
+ - --type=data
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.configRepository }}/{{ .Values.configImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-config
+ volumeMounts:
+ - mountPath: /config/default.json
+ name: {{ include "common.fullname" . }}
+ subPath: default.json
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ include "common.servicename" . }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/kibana/config/kibana.yml
+ name: {{ include "common.fullname" . }}
+ subPath: kibana.yml
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: kibana.yml
+ path: kibana.yml
+ - key: default.json
+ path: default.json
+
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
-apiVersion: extensions/v1beta1
-kind: Deployment
+apiVersion: v1
+kind: Service
metadata:
- name: {{ include "common.fullname" . }}
+ name: {{ include "common.servicename" . }}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
+ annotations:
spec:
- replicas: {{ .Values.replicaCount }}
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.config.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.config.portName }}
+ {{- end}}
selector:
- matchLabels:
- app: {{ include "common.name" . }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ .Release.Name }}
- name: {{ include "common.name" . }}
- spec:
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
- containers:
- - image: "{{ include "common.repository" . }}/{{ .Values.image }}"
- command: ["/usr/local/bin/docker-entrypoint.sh"]
- args: ["agent","-server","-client","0.0.0.0","-enable-script-checks","-bootstrap-expect={{ .Values.replicaCount }}","-ui"]
- name: {{ include "common.name" . }}
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# Configuration image
+configRepository: docker.io
+configImage: taskrabbit/elasticsearch-dump
+
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+loggingRepository: docker.elastic.co
+image: kibana/kibana:5.6.8
+pullPolicy: IfNotPresent
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+ elasticsearchServiceName: cdash-es
+ elasticsearchPort: 9200
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 360
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ #Example service definition with external, internal and node ports.
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: NodePort
+ name: cdash-kibana
+ portName: cdash-kibana-http
+ externalPort: 5601
+ internalPort: 5601
+ nodePort: 90
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+description: ONAP Clamp Dashboard Logstash
+name: clamp-dash-logstash
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+http.host: "0.0.0.0"
+## Path where pipeline configurations reside
+path.config: /usr/share/logstash/pipeline
+
+## Type of queue : memeory based or file based
+#queue.type: persisted
+## Size of queue
+#queue.max_bytes: 1024mb
+## Setting true makes logstash check periodically for change in pipeline configurations
+config.reload.automatic: true
+
+## xpack configurations
+#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"]
+#xpack.monitoring.elasticsearch.username: elastic
+#xpack.monitoring.elasticsearch.password: changeme
+xpack.monitoring.enabled: false
--- /dev/null
+input {
+ http_poller {
+ urls => {
+ event_queue => {
+ method => get
+ url => "${dmaap_base_url}/events/${event_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
+ headers => {
+ Accept => "application/json"
+ }
+ add_field => { "topic" => "${event_topic}" }
+ }
+ notification_queue => {
+ method => get
+ url => "${dmaap_base_url}/events/${notification_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
+ headers => {
+ Accept => "application/json"
+ }
+ add_field => { "topic" => "${notification_topic}" }
+ }
+ request_queue => {
+ method => get
+ url => "${dmaap_base_url}/events/${request_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
+ headers => {
+ Accept => "application/json"
+ }
+ add_field => { "topic" => "${request_topic}" }
+ }
+ }
+ socket_timeout => 30
+ request_timeout => 30
+ interval => 60
+ codec => "plain"
+ }
+}
+
+filter {
+ # avoid noise if no entry in the list
+ if [message] == "[]" {
+ drop { }
+ }
+
+ # parse json, split the list into multiple events, and parse each event
+ json {
+ source => "[message]"
+ target => "message"
+ }
+ split {
+ field => "message"
+ }
+ json {
+ source => "message"
+ }
+ mutate { remove_field => [ "message" ] }
+ # express timestamps in milliseconds instead of microseconds
+ ruby {
+ code => "event.set('closedLoopAlarmStart', Integer(event.get('closedLoopAlarmStart')))"
+ }
+ date {
+ match => [ "closedLoopAlarmStart", UNIX_MS ]
+ target => "closedLoopAlarmStart"
+ }
+
+ if [closedLoopAlarmEnd] {
+ ruby {
+ code => "event.set('closedLoopAlarmEnd', Integer(event.get('closedLoopAlarmEnd')))"
+ }
+ date {
+ match => [ "closedLoopAlarmEnd", UNIX_MS ]
+ target => "closedLoopAlarmEnd"
+ }
+
+ }
+ #"yyyy-MM-dd HH:mm:ss"
+ if [notificationTime] {
+ mutate {
+ gsub => [
+ "notificationTime", " ", "T"
+ ]
+ }
+ date {
+ match => [ "notificationTime", ISO8601 ]
+ target => "notificationTime"
+ }
+ }
+}
+output {
+ stdout {
+ codec => rubydebug
+ }
+
+ if [http_request_failure] {
+ elasticsearch {
+ codec => "json"
+ hosts => ["${elasticsearch_base_url}"]
+ index => "errors-%{+YYYY.MM.DD}"
+ doc_as_upsert => true
+ }
+ } else {
+ elasticsearch {
+ codec => "json"
+ hosts => ["${elasticsearch_base_url}"]
+ index => "logstash-%{+YYYY.MM.DD}" # creates daily indexes
+ doc_as_upsert => true
+
+ }
+ }
+
+}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - clamp-dash-es
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository| default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ env:
+ - name: dmaap_consumer_group
+ value: "{{ .Values.config.dmaapConsumerGroup }}"
+ - name: dmaap_consumer_id
+ value: "{{ .Values.config.dmaapConsumerId }}"
+ - name: event_topic
+ value: "{{ .Values.config.eventTopic }}"
+ - name: notification_topic
+ value: "{{ .Values.config.notificationTopic }}"
+ - name: request_topic
+ value: "{{ .Values.config.requestTopic }}"
+ - name: dmaap_base_url
+ value: {{ .Values.config.dmaapScheme }}://{{ .Values.config.dmaapHost }}.{{ include "common.namespace" . }}:{{ .Values.config.dmaapPort }}
+ - name: elasticsearch_base_url
+ value: "http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}"
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ include "common.servicename" . }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/logstash/config/logstash.yml
+ name: {{ include "common.fullname" . }}
+ subPath: logstash.yml
+ - mountPath: /usr/share/logstash/pipeline/logstash.conf
+ name: {{ include "common.fullname" . }}
+ subPath: pipeline.conf
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: logstash.yml
+ path: logstash.yml
+ - key: pipeline.conf
+ path: pipeline.conf
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.config.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.config.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# application image
+loggingRepository: docker.elastic.co
+image: logstash/logstash:5.6.8
+pullPolicy: IfNotPresent
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+ elasticsearchServiceName: cdash-es
+ elasticsearchPort: 9200
+ dmaapHost: message-router.{{ include "common.namespace" . }}
+ dmaapScheme: https
+ dmaapPort: 3905
+ dmaapConsumerGroup: "clampdashboard"
+ dmaapConsumerId: "clampdashboard"
+ eventTopic: "DCAE-CL-EVENT"
+ notificationTopic: "POLICY-CL-MGT"
+ requestTopic: "APPC-CL"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ #Example service definition with external, internal and node ports.
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ name: cdash-ls
+ portName: cdash-ls-healthcheck
+ externalPort: 9600
+ internalPort: 9600
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
+{{/*
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
http://{{ . }}
{{- end }}
{{- else if contains "NodePort" .Values.service.type }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
echo http://$NODE_IP:$NODE_PORT
{{- else if contains "LoadBalancer" .Values.service.type }}
NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
{{- else if contains "ClusterIP" .Values.service.type }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
echo "Visit http://127.0.0.1:8080 to use your application"
kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
{{- end }}
spec:
type: {{ .Values.service.type }}
ports:
- - port: {{ .Values.service.internalPort }}
- targetPort: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
- - port: {{ .Values.service.internalPort2 }}
- targetPort: {{ .Values.service.internalPort2 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
- name: {{ .Values.service.portName2 }}
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
selector:
- app: {{ template "common.name" . }}
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ clusterIP: None
+---
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}-ui
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type2 }}
+ ports:
+ {{if eq .Values.service.type2 "NodePort" -}}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- else -}}
+ - port: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: apps/v1beta1
+kind: StatefulSet
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ serviceName: {{ include "common.servicename" . }}
+ replicas: {{ .Values.replicaCount }}
+ selector:
+ matchLabels:
+ app: {{ include "common.name" . }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ command: ["/usr/local/bin/docker-entrypoint.sh"]
+ args:
+ - "agent"
+ - "-bootstrap-expect={{ .Values.replicaCount }}"
+ - "-enable-script-checks"
+{{- $fullname := include "common.fullname" . -}}
+{{- $servname := include "common.servicename" . -}}
+{{- range $i,$t := until (int .Values.replicaCount)}}
+ - "-retry-join={{ $fullname }}-{{$i}}.{{ $servname }}"
+{{- end }}
+ - "-client=0.0.0.0"
+ - "-server"
+ - "-ui"
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
# flag to enable debugging - application support required
debugEnabled: false
-replicaCount: 1
+replicaCount: 3
nodeSelector: {}
# probe configuration parameters
liveness:
- initialDelaySeconds: 90
- periodSeconds: 10
+ initialDelaySeconds: 10
+ periodSeconds: 5
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
enabled: true
readiness:
- initialDelaySeconds: 90
- periodSeconds: 10
+ initialDelaySeconds: 10
+ periodSeconds: 5
service:
- type: NodePort
+ type: ClusterIP
name: consul-server
- portName: consul-ui
- nodePort: 70
- internalPort: 8500
- portName2: consul-join
- nodePort2: 71
- internalPort2: 8301
+ portName: consul-join
+ internalPort: 8301
+ type2: NodePort
+ portName2: consul-ui
+ internalPort2: 8500
+ nodePort2: 70
ingress:
enabled: false
{
"id": "hbase-aai",
"name": "HBase Health Check",
- "http": "http://hbase:8080/status/cluster",
+ "http": "http://aai-hbase:8080/status/cluster",
"method": "GET",
"header": {
"Cache-Control": ["no-cache"],
{
"id": "log-elasticsearch-server",
"name": "Log Elastic Search Health Check",
- "http": "http://elasticsearch:9200/_cluster/health?pretty",
+ "http": "http://log-es:9200/_cluster/health?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-elasticsearch-tcp",
"name": "Log Elastic Search TCP Health Check",
- "tcp": "elasticsearchtcp:9300",
+ "tcp": "log-es-tcp:9300",
"interval": "15s",
"timeout": "1s"
}
{
"id": "log-kibana-server",
"name": "Log kibana Health Check",
- "http": "http://kibana:5601/status",
+ "http": "http://log-kibana:5601/status",
"method": "HEAD",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-gi",
"name": "Log Stash Health Check - General Information",
- "http": "http://logstashinternal:9600/?pretty",
+ "http": "http://log-ls-http:9600/?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-node-info",
"name": "Log Stash Health Check - Node Information",
- "http": "http://logstashinternal:9600/_node/?pretty",
+ "http": "http://log-ls-http:9600/_node/?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-os-info",
"name": "Log Stash Health Check - OS Information",
- "http": "http://logstashinternal:9600/_node/os?pretty",
+ "http": "http://log-ls-http:9600/_node/os?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-jvm-info",
"name": "Log Stash Health Check - JVM Information",
- "http": "http://logstashinternal:9600/_node/jvm?pretty",
+ "http": "http://log-ls-http:9600/_node/jvm?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-plugin-info",
"name": "Log Stash Health Check - Plugin Information",
- "http": "http://logstashinternal:9600/_node/plugins?pretty",
+ "http": "http://log-ls-http:9600/_node/plugins?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-node-stat",
"name": "Log Stash Health Check - Node Stats",
- "http": "http://logstashinternal:9600/_node/stats?pretty",
+ "http": "http://log-ls-http:9600/_node/stats?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-jvm-stat",
"name": "Log Stash Health Check - JVM Stats",
- "http": "http://logstashinternal:9600/_node/stats/jvm?pretty",
+ "http": "http://log-ls-http:9600/_node/stats/jvm?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-process-stat",
"name": "Log Stash Health Check - Process Stats",
- "http": "http://logstashinternal:9600/_node/stats/process?pretty",
+ "http": "http://log-ls-http:9600/_node/stats/process?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-internal-server-os-stat",
"name": "Log Stash Health Check - OS Stats",
- "http": "http://logstashinternal:9600/_node/stats/os?pretty",
+ "http": "http://log-ls-http:9600/_node/stats/os?pretty",
"method": "GET",
"tls_skip_verify": true,
"interval": "15s",
{
"id": "log-logstash-tcp",
"name": "Log Stash File Beat TCP Health Check",
- "tcp": "logstash:5044",
+ "tcp": "log-ls:5044",
"interval": "15s",
"timeout": "1s"
}
-NAME=$(/consul/bin/kubectl -n {{ include "common.namespace" . }} get pod | grep -o "so-db[^[:space:]]*")
+NAME=$(/consul/bin/kubectl -n {{ include "common.namespace" . }} get pod | grep -o "[^[:space:]]*-so-db[^[:space:]]*")
if [ -n "$NAME" ]; then
if /consul/bin/kubectl -n {{ include "common.namespace" . }} exec -it $NAME -- bash -c 'mysqladmin status -u root -p$MYSQL_ROOT_PASSWORD' > /dev/null; then
# Query the Hbase service for the cluster status.
-GET_CLUSTER_STATUS_RESPONSE=$(curl -si -X GET -H "Accept: text/xml" http://hbase:8080/status/cluster)
+GET_CLUSTER_STATUS_RESPONSE=$(curl -si -X GET -H "Accept: text/xml" http://aai-hbase:8080/status/cluster)
if [ -z "$GET_CLUSTER_STATUS_RESPONSE" ]; then
echo "Tabular store is unreachable."
- return 2
+ return 2
fi
-# Check the resulting status JSON to see if there is a 'DeadNodes' stanza with
+# Check the resulting status JSON to see if there is a 'DeadNodes' stanza with
# entries.
DEAD_NODES=$(echo $GET_CLUSTER_STATUS_RESPONSE | grep "<DeadNodes/>")
-NAME=$(/consul/bin/kubectl -n {{ include "common.namespace" . }} get pod | grep -o "vid-mariadb[^[:space:]]*")
+NAME=$(/consul/bin/kubectl -n {{ include "common.namespace" . }} get pod | grep -o "[^[:space:]]*-vid-mariadb[^[:space:]]*")
if [ -n "$NAME" ]; then
if /consul/bin/kubectl -n {{ include "common.namespace" . }} exec -it $NAME -- bash -c 'mysqladmin status -u root -p$MYSQL_ROOT_PASSWORD' > /dev/null; then
- "-c"
- |
cp /tmp/consul/config/* /consul/config
- /usr/local/bin/docker-entrypoint.sh agent -client 0.0.0.0 -enable-script-checks -join {{ .Values.consulServer.nameOverride }}.{{ include "common.namespace" .}}
+ /usr/local/bin/docker-entrypoint.sh agent -client 0.0.0.0 -enable-script-checks -retry-join {{ .Values.consulServer.nameOverride }}
name: {{ include "common.name" . }}
volumeMounts:
- mountPath: /tmp/consul/config
- secret:
secretName: {{ include "common.fullname" . }}-certs-secret
name: consul-agent-certs-config
-
#TODO would like to make this conditional, as with the other input templates
# but having template expansion issues trying to do that
-cbs_image: {{ .Values.componentImages.config_binding_service }}
+{{ if .Values.componentImages.config_binding_service }}
+cbs_image: {{ include "common.repository" . }}/{{ .Values.componentImages.config_binding_service }}
+{{ end }}
#
# ECOMP is a trademark and service mark of AT&T Intellectual Property.
{{ if .Values.componentImages.deployment_handler }}
-deployment_handler_image: {{ .Values.componentImages.deployment_handler }}
+deployment_handler_image: {{ include "common.repository" . }}/{{ .Values.componentImages.deployment_handler }}
{{ end }}
application_config:
cloudify:
{
{{ if .Values.componentImages.holmes_engine }}
- "he_image" : "{{ .Values.componentImages.holmes_engine }}",
+ "he_image" : '{{ include "common.repository" . }}/{{ .Values.componentImages.holmes_engine }}',
{{ end }}
"msb_hostname": "{{ .Values.config.address.msb_discovery }}.{{include "common.namespace" . }}",
"dcae_CL_publish_url": "http://{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}:3904/events/unauthenticated.DCAE_CL_OUTPUT",
# ============LICENSE_END=========================================================
{
+{{ if .Values.componentImages.holmes_rules }}
+ "hr_image" : '{{ include "common.repository" . }}/{{ .Values.componentImages.holmes_rules }}',
+{{ end }}
+
"msb_hostname": "{{ .Values.config.address.msb_discovery }}.{{include "common.namespace" . }}",
"pgaas_cluster_name" : "{{ .Values.postgres.service.name2 }}.{{include "common.namespace" . }}",
"database_name":"holmes"
sdc_msg_bus_address: '{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}'
postgres_user_inventory: "postgres"
postgres_password_inventory: "onap123"
-service_change_handler_image: {{ .Values.componentImages.service_change_handler }}
+{{ if .Values.componentImages.service_change_handler }}
+service_change_handler_image: '{{ include "common.repository" . }}/{{ .Values.componentImages.service_change_handler }}'
+{{ end }}
{{ if .Values.componentImages.inventory }}
-inventory_image: "{{ .Values.componentImages.inventory }}"
+inventory_image: '{{ include "common.repository" . }}/{{ .Values.componentImages.inventory }}'
{{ end }}
# ============LICENSE_END=========================================================
{{ if .Values.componentImages.policy_handler }}
-policy_handler_image: {{ .Values.componentImages.policy_handler }}
+policy_handler_image: {{ include "common.repository" . }}/{{ .Values.componentImages.policy_handler }}
{{ end }}
application_config:
policy_handler :
# ============LICENSE_END=========================================================
{{ if .Values.componentImages.tca }}
-tca_image: {{ .Values.componentImages.tca }}
+tag_version: {{ include "common.repository" . }}/{{ .Values.componentImages.tca }}
{{ end }}
dmaap_host: {{ .Values.config.address.message_router }}.{{include "common.namespace" . }}
consul_host: {{ .Values.config.address.consul.host }}.{{include "common.namespace" . }}
# ============LICENSE_END=========================================================
{{ if .Values.componentImages.ves }}
-tag_version: {{ .Values.componentImages.ves }}
+tag_version: {{ include "common.repository" . }}/{{ .Values.componentImages.ves }}
{{ end }}
external_port : "30235"
ves_other_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_OTHER_OUTPUT/"
ves_heartbeat_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_HEARTBEAT_OUTPUT/"
ves_fault_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_FAULT_OUTPUT/"
-ves_measurement_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.SEC_MEASUREMENT_OUTPUT/"
+ves_measurement_publish_url: "http://{{ .Values.config.address.message_router }}:3904/events/unauthenticated.VES_MEASUREMENT_OUTPUT/"
key: password
- name: CONSUL
value: {{ .Values.config.address.consul.host }}:{{ .Values.config.address.consul.port }}
+ - name: DCAE_NAMESPACE
+ value: {{ .Values.dcae_ns | default "" }}
+ - name: ONAP_NAMESPACE
+ value: {{ include "common.namespace" . }}
volumes:
- name: {{ include "common.fullname" . }}-dcae-inputs
configMap:
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
config:
pgPrimaryPassword: onapdemodb
pgRootPassword: onapdemodb
-
+ persistence:
+ mountSubPath: dcae/data
+ mountInitPath: dcae
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:latest
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.1.10
# DCAE component images to be deployed via Cloudify Manager
# Use to override default setting in blueprints
componentImages:
#TODO for further investigation: input template expansion issues if we comment this out
- config_binding_service: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.configbinding:2.1.5
-# deployment_handler: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.deployment-handler:2.1.1
-# holmes_engine: nexus3.onap.org:10001//onap/holmes/engine-management:v1.0.0
-# holmes_rules: nexus3.onap.org:10001/onap/holmes/rule-management:v1.0.0
- inventory: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.inventory-api:3.0.1
- policy_handler: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.policy-handler:2.4.1
- service_change_handler: nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.servicechange-handler:1.1.3
-# tca: nexus3.onap.org:10001/onap/org.onap.dcaegen2.deployments.tca-cdap-container.tca-cdap-container:1.0.0
-# ves: nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1-latest
+ config_binding_service: onap/org.onap.dcaegen2.platform.configbinding:latest
+ deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:latest
+ holmes_engine: onap/holmes/engine-management:latest
+ holmes_rules: onap/holmes/rule-management:latest
+ inventory: onap/org.onap.dcaegen2.platform.inventory-api:latest
+ policy_handler: onap/org.onap.dcaegen2.platform.policy-handler:latest
+ service_change_handler: onap/org.onap.dcaegen2.platform.servicechange-handler:latest
+ tca: onap/org.onap.dcaegen2.deployments.tca-cdap-container.tca-cdap-container:latest
+ ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:latest
# Kubernetes namespace for components deployed via Cloudify manager
# If empty, use the common namespace
-dcae_ns: "dcae"
+# dcae_ns: "onap"
type: ExternalName
externalName: {{ .Values.service.name }}.{{ include "common.namespace" . }}.svc.cluster.local
{{ end }}
+---
# Provide alternate name for consul in common namespace to support CM plugin discovery
apiVersion: v1
kind: Service
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
repositoryCred:
# Kubernetes namespace for components deployed via Cloudify manager
# If empty, use the common namespace
-dcae_ns: "dcae"
+# dcae_ns: "dcae"
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.0
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
periodSeconds: 10
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.0.0
+image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.1.0
# Kubernetes namespace for components deployed via Cloudify manager
# If empty, use the common namespace
-dcae_ns: "dcae"
+# dcae_ns: "onap"
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.1.1
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
release: {{ .Release.Name }}
spec:
initContainers:
- - command:
- - bash
- args:
+ - name: {{ include "common.name" . }}-seed-kafka-topics
+ command:
+ - /bin/bash
- -c
- - "if [ -d /var/tmp/SDC-DISTR-NOTIF-TOPIC-SDC-OPENSOURCE-ENV1-0 ]; then echo nothing to do; else cp -a /opt/config/src/message-router/dcae-startup-vm-message-router/docker_files/data-kafka/* /var/tmp/; fi"
- image: "{{ .Values.global.configRepository }}/{{ .Values.global.configImage }}"
+ - >
+ if [ -d /tmp/topics/ECOMP-PORTAL-INBOX-0 ]; then
+ echo "nothing to do";
+ else
+ git clone -b {{ .Values.config.gerritBranch }} --single-branch {{ .Values.config.gerritProject }} /tmp/gerrit;
+ echo "Clone complete. Copying from /tmp/gerrit/oom-projects/data-kafka/kafka-logs/* to /tmp/topics";
+ cp -var /tmp/gerrit/oom-topics/data-kafka/kafka-logs/* /tmp/topics;
+ echo "Done.";
+ fi
+ image: "{{ .Values.global.ubuntuInitRepository }}/{{ .Values.ubuntuInitImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
volumeMounts:
- - mountPath: /var/tmp
+ - mountPath: /tmp/topics
name: kafka-data
- name: kafka-primer
- command:
- /root/ready.py
args:
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
+ {{ if eq .Values.liveness.enabled true }}
livenessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
+ {{ end }}
readinessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
- configRepository: oomk8s
- configImage: config-init:2.0.0-SNAPSHOT
persistence: {}
+ ubuntuInitRepository: registry.hub.docker.com
#################################################################
# Application configuration defaults.
repository: docker.io
image: wurstmeister/kafka:1.1.0
pullPolicy: Always
+ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
zookeeper:
name: message-router-zookeeper
debugEnabled: false
# application configuration
-config: {}
+config:
+ # gerrit branch where the latest code is checked in
+ gerritBranch: master
+ # gerrit project where the latest code is checked in
+ gerritProject: http://gerrit.onap.org/r/dmaap/messagerouter/messageservice.git
+
# default number of instances
replicaCount: 1
release: {{ .Release.Name }}
spec:
initContainers:
- - command:
- - bash
- args:
+ - name: {{ include "common.name" . }}-seed-zookeeper-topics
+ command:
+ - /bin/bash
- -c
- - "if [ -d /var/tmp/version-2 ]; then echo nothing to do; else cp -a /opt/config/src/message-router/dcae-startup-vm-message-router/docker_files/data-zookeeper/* /var/tmp/; fi"
- image: "{{ .Values.global.configRepository }}/{{ .Values.global.configImage }}"
+ - >
+ if [ -d /tmp/topics/version-2 ]; then
+ echo "nothing to do";
+ else
+ git clone -b {{ .Values.config.gerritBranch }} --single-branch {{ .Values.config.gerritProject }} /tmp/gerrit;
+ echo "Clone complete. Copying from /tmp/gerrit/oom-projects/data-zookeeper/* to /tmp/topics";
+ cp -var /tmp/gerrit/oom-topics/data-zookeeper/* /tmp/topics;
+ echo "Done.";
+ fi
+ image: "{{ .Values.global.ubuntuInitRepository }}/{{ .Values.ubuntuInitImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
volumeMounts:
- - mountPath: /var/tmp
+ - mountPath: /tmp/topics
name: zookeeper-data
- name: zookeeper-primer
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
+ {{ if eq .Values.liveness.enabled true }}
livenessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
+ {{ end }}
readinessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
- configRepository: oomk8s
- configImage: config-init:2.0.0-SNAPSHOT
+ ubuntuInitRepository: registry.hub.docker.com
persistence: {}
#################################################################
repository: docker.io
image: wurstmeister/zookeeper:latest
pullPolicy: Always
+ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
# flag to enable debugging - application support required
debugEnabled: false
# application configuration
-config: {}
+config:
+ # gerrit branch where the latest code is checked in
+ gerritBranch: master
+ # gerrit project where the latest code is checked in
+ gerritProject: http://gerrit.onap.org/r/dmaap/messagerouter/messageservice.git
# default number of instances
replicaCount: 1
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableMockSniroEmulator }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: sniro-emulator
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- selector:
- matchLabels:
- app: sniro-emulator
- replicas: 1
- template:
- metadata:
- labels:
- app: sniro-emulator
- name: sniro-emulator
- spec:
- containers:
- - image: "{{ .Values.image.onapmock }}:{{ .Values.image.tag }}"
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: sniro-emulator
- ports:
- - containerPort: 9999
- args: ["--verbose"]
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
sources:
- https://gerrit.onap.org/r/#/admin/projects/
icon: https://wiki.onap.org/download/thumbnails/1015829/onap_704x271%20copy.png?version=1&modificationDate=1488326334000&api=v2
+tillerVersion: "~2.8.2"
version: ~2.0.0
repository: '@local'
condition: log.enabled
- - name: mock
- version: ~0.1.0
+ - name: sniro-emulator
+ version: ~2.0.0
repository: '@local'
- condition: mock.enabled
+ condition: sniro-emulator.enabled
- name: msb
version: ~2.0.0
repository: '@local'
enabled: false
log:
enabled: false
-mock:
+sniro-emulator:
enabled: false
oof:
enabled: false
enabled: false
log:
enabled: false
-mock:
+sniro-emulator:
enabled: false
msb:
enabled: false
enabled: true
log:
enabled: true
-message-router:
- enabled: true
-mock:
+sniro-emulator:
enabled: true
oof:
enabled: true
nodePortPrefix: 302
repository: nexus3.onap.org:10001
readinessRepository: oomk8s
- readinessImage: readiness-check:1.0.0
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
repository: nexus3.onap.org:10001
image: library/tomcat:8.5
pullPolicy: Always
-warImage: onap/music/music:2.5.3
+warImage: onap/music/music:latest
# flag to enable debugging - application support required
debugEnabled: false
#################################################################
global:
readinessRepository: oomk8s
- readinessImage: readiness-check:1.0.0
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
repository: nexus3.onap.org:10001
commonConfigPrefix: onap-oof-has
image:
- readiness: oomk8s/readiness-check:1.1.0
- optf_has: onap/optf-has:1.1.1
+ readiness: oomk8s/readiness-check:2.0.0
+ optf_has: onap/optf-has:latest
filebeat: docker.elastic.co/beats/filebeat:5.5.0
nsPrefix: onap
global:
nodePortPrefix: 302
readinessRepository: oomk8s
- readinessImage: readiness-check:1.0.0
+ readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
#################################################################
image: onap/portal-db:v2.2.0
pullPolicy: Always
-readinessImage: "readiness-check:2.0.0"
+readinessImage: readiness-check:2.0.0
mariadbInitImage: "mariadb-client-init:2.0.0"
# application configuration
# heat template parameter values common to all heat template continaing these parameters
"defaults" : {
'key_name' : 'vfw_key${uuid}',
- "pub_key" : "${pub_key}",
+ "pub_key" : "{{ .Values.vnfPubKey }}",
"repo_url_blob" : "https://nexus.onap.org/content/repositories/raw",
"repo_url_artifacts" : "https://nexus.onap.org/content/groups/staging",
"demo_artifacts_version" : "${GLOBAL_INJECTED_ARTIFACTS_VERSION}",
"onap_private_net_id" : "${GLOBAL_INJECTED_NETWORK}",
"onap_private_subnet_id" : "{{ .Values.openStackPrivateSubnetId }}",
"onap_private_net_cidr" : "{{ .Values.openStackPrivateNetCidr }}",
- "dcae_collector_ip" : "${dcae_collector_ip}",
- "dcae_collector_port" : "8080",
+ "dcae_collector_ip" : "{{ .Values.dcaeCollectorIp }}",
+ "dcae_collector_port" : "30235",
"public_net_id" : "${GLOBAL_INJECTED_PUBLIC_NET_ID}",
"cloud_env" : "${GLOBAL_INJECTED_CLOUD_ENV}",
"install_script_version" : "${GLOBAL_INJECTED_SCRIPT_VERSION}",
GLOBAL_SDNGC_ADMIN_PORT = "8843"
GLOBAL_SDNGC_USERNAME = "admin"
GLOBAL_SDNGC_PASSWORD = "Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U"
+# sms (AAF) info
+GLOBAL_SMS_SERVER_PROTOCOL = "https"
+GLOBAL_SMS_SERVER_NAME = "aaf-sms.{{include "common.namespace" .}}"
+GLOBAL_SMS_SERVER_PORT = "10443"
# vid info - everything is from the private oam network (also called onap private network)
GLOBAL_VID_SERVER_PROTOCOL = "http"
GLOBAL_VID_SERVER_PORT = "8080"
GLOBAL_INJECTED_SO_IP_ADDR = "so.{{include "common.namespace" .}}"
GLOBAL_INJECTED_UBUNTU_1404_IMAGE = "{{ .Values.ubuntu14Image }}"
GLOBAL_INJECTED_UBUNTU_1604_IMAGE = "{{ .Values.ubuntu16Image }}"
+GLOBAL_INJECTED_VM_IMAGE_NAME = "{{ .Values.ubuntu14Image }}"
GLOBAL_INJECTED_VID_IP_ADDR = "vid.{{include "common.namespace" .}}"
GLOBAL_INJECTED_VM_FLAVOR = "{{ .Values.openStackFlavourMedium }}"
GLOBAL_INJECTED_VNFSDK_IP_ADDR = "refrepo.{{include "common.namespace" .}}"
"GLOBAL_INJECTED_SO_IP_ADDR" : "so.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_UBUNTU_1404_IMAGE" : "{{.Values.ubuntu14Image}}",
"GLOBAL_INJECTED_UBUNTU_1604_IMAGE" : "{{.Values.ubuntu16Image}}",
+ "GLOBAL_INJECTED_VM_IMAGE_NAME" : "{{ .Values.ubuntu14Image }}",
"GLOBAL_INJECTED_VID_IP_ADDR" : "vid.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_VM_FLAVOR" : "{{ .Values.openStackFlavourMedium }}",
"GLOBAL_INJECTED_VNFSDK_IP_ADDR" : "refrepo.{{include "common.namespace" .}}"
# The first 2 octets of the private Openstack subnet where VNFs will be spawned.
# Needed because sdnc preload templates hardcodes things like this 10.0.${ecompnet}.X
openStackOamNetworkCidrPrefix: "10.0"
+# Override with Pub Key for access to VNF
+vnfPubKey: "FILL_IN_WITH_PUB_KEY"
+# Override with DCAE VES Collector external IP
+dcaeCollectorIp: "FILL_IN_WITH_DCAE_VES_COLLECTOR_IP"
# default number of instances
replicaCount: 1
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
# limitations under the License.
apiVersion: v1
-description: Postgres Service
-name: vnfsdk-postgres
+description: ONAP Mock Sniro Emulator
+name: sniro-emulator
version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ # local reference to common chart, as it is
+ # a part of this chart's package and will not
+ # be published independently to a repo (at this point)
+ repository: '@local'
+{{/*
+# Copyright © 2017 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
http://{{ . }}
{{- end }}
{{- else if contains "NodePort" .Values.service.type }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
echo http://$NODE_IP:$NODE_PORT
{{- else if contains "LoadBalancer" .Values.service.type }}
NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
{{- else if contains "ClusterIP" .Values.service.type }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
echo "Visit http://127.0.0.1:8080 to use your application"
kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
{{- end }}
heritage: {{ .Release.Service }}
spec:
replicas: {{ .Values.replicaCount }}
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
template:
metadata:
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
- name: {{ include "common.name" . }}
spec:
- hostname: {{ include "common.name" . }}
containers:
- - args:
+ - name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
- imagePullPolicy: {{ .Values.pullPolicy | default .Values.global.pullPolicy }}
- name: {{ include "common.name" . }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
-# limitations under the License.
+# limitations under the License
apiVersion: v1
kind: Service
type: {{ .Values.service.type }}
ports:
{{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default "302" }}{{ .Values.service.nodePort }}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- {{- end}}
name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
#################################################################
# Global configuration defaults.
#################################################################
-global:
+global: # global defaults
nodePortPrefix: 302
- repository: nexus3.onap.org:10001
- readinessRepository: oomk8s
- readinessImage: readiness-check:2.0.0
- loggingRepository: docker.elastic.co
- loggingImage: beats/filebeat:5.5.0
-#################################################################
-# Application configuration defaults.
-#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/vnfsdk/refrepo/postgres:latest
-pullPolicy: Always
+image: onap/sniroemulator
+pullPolicy: IfNotPresent
# flag to enable debugging - application support required
debugEnabled: false
+# default number of instances
replicaCount: 1
nodeSelector: {}
periodSeconds: 10
service:
- type: ClusterIP
- name: postgres
- internalPort: 5432
- externalPort: 5432
+ type: NodePort
+ name: sniro-emulator
+ internalPort: 9999
+ externalPort: 80
+ nodePort: 88
+ portName: httpd
ingress:
enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
dependencies:
- name: common
version: ~2.0.0
- # local reference to common chart, as it is
- # a part of this chart's package and will not
- # be published independently to a repo (at this point)
+ repository: '@local'
+ - name: postgres
+ version: ~2.0.0
repository: '@local'
- /root/ready.py
args:
- --container-name
- - "{{ .Values.vnfsdkpostgres.nameOverride }}"
+ - "{{ .Values.postgres.nameOverride }}"
env:
- name: NAMESPACE
valueFrom:
image: onap/vnfsdk/refrepo:1.1-STAGING-latest
pullPolicy: Always
-#subchart name
-vnfsdkpostgres:
+postgres:
nameOverride: vnfsdk-postgres
+ service:
+ name: vnfsdk-dbset
+ name2: vnfsdk-dbpri
+ name3: vnfsdk-dbrep
+ nfsprovisionerPrefix: vnfsdk
+ persistence:
+ mountSubPath: vnfsdk/data
+ mountInitPath: vnfsdk
+ enabled: true
+ disableNfsProvisioner: true
+ container:
+ name:
+ primary: vnfsdk-dbpri
+ replica: vnfsdk-dbrep
# flag to enable debugging - application support required
debugEnabled: false
Code Review / oom.git / commitdiff