chart-version: { get_input: chart-version }
namespace: { get_input: namespace }
stable-repo-url: { get_input: stable-repo-url}
- config: '{ "aaf": {"enabled": false}, "aai": {"enabled": false}, "clamp": {"enabled": false}, "cli": {"enabled": false}, "consul": {"enabled": false}, "dcaegen2": {"enabled": false}, "dmaap": {"enabled": false}, "log": {"enabled": false}, "sniro-emulator": {"enabled": false}, "msb": {"enabled": false}, "multicloud": {"enabled": false}, "nbi": {"enabled": false}, "oof": {"enabled": false}, "policy": {"enabled": false}, "pomba": {"enabled": false}, "portal": {"enabled": false}, "robot": {"enabled": false}, "sdc": {"enabled": false}, "sdnc": {"enabled": false}, "so": {"enabled": false}, "uui": {"enabled": false}, "vfc": {"enabled": false}, "vid": {"enabled": false}, "vnfsdk": {"enabled": false} }'
+ config: '{ "aaf": {"enabled": false}, "aai": {"enabled": false}, "clamp": {"enabled": false}, "cli": {"enabled": false}, "consul": {"enabled": false}, "dcaegen2": {"enabled": false}, "dmaap": {"enabled": false}, "log": {"enabled": false}, "sniro-emulator": {"enabled": false}, "msb": {"enabled": false}, "multicloud": {"enabled": false}, "nbi": {"enabled": false}, "oof": {"enabled": false}, "policy": {"enabled": false}, "pomba": {"enabled": false}, "portal": {"enabled": false}, "robot": {"enabled": false}, "sdc": {"enabled": false}, "sdnc": {"enabled": false}, "so": {"enabled": false}, "uui": {"enabled": false}, "vfc": {"enabled": false}, "vnfsdk": {"enabled": false} }'
aaf:
type: onap.nodes.component
- type: cloudify.relationships.connected_to
target: onap_env
- vid:
- type: onap.nodes.component
- properties:
- tiller-server-ip: { get_input: tiller-server-ip }
- tiller-server-port: { get_input: tiller-server-port }
- component-name: vid
- chart-repo-url: { get_input: chart-repo-url }
- chart-version: { get_input: chart-version }
- namespace: { get_input: namespace }
- stable-repo-url: { get_input: stable-repo-url}
- relationships:
- - type: cloudify.relationships.connected_to
- target: onap_env
-
vnfsdk:
type: onap.nodes.component
properties:
Workarounds
-----------
-- `<https://github.com/bitnami/bitnami-docker-mariadb-galera/issues/35>`_
+- `<https://github.com/bitnami/charts/issues>`_
Workaround is to generate a password with "short" strength or pregenerate
passwords without single quote in it. Default deployment is using "short"
password generation for mariadb.
DCAE:OBF:1g8u1f9d1f991g8w,admin
POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
ASDC:OBF:1f991j0u1j001f9d,admin
-VID:OBF:1jm91i0v1jl9,admin
ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
OOF:OBF:1img1ke71ily,admin
dcae@dcae.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
policy@policy.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
sdc@sdc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
-vid@vid.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
oof@oof.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
pomba@pomba.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
vfc@vfc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
# ASDC -> sdc@sdc.onap.org
Basic QVNEQzpBU0RD,Basic c2RjQHNkYy5vbmFwLm9yZzpkZW1vMTIzNDU2IQ==,2050-03-03
-# VID -> vid@vid.onap.org
-Basic VklEOlZJRA==,Basic dmlkQHZpZC5vbmFwLm9yZzpkZW1vMTIzNDU2IQ==,2050-03-03
-
# OOF -> oof@oof.onap.org
Basic T09GOk9PRg==,Basic b29mQG9vZi5vbmFwLm9yZzpkZW1vMTIzNDQ2IQ==,2050-03-03
DCAE:OBF:1g8u1f9d1f991g8w,admin
POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
ASDC:OBF:1f991j0u1j001f9d,admin
-VID:OBF:1jm91i0v1jl9,admin
ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
OOF:OBF:1img1ke71ily,admin
dcae@dcae.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
policy@policy.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
sdc@sdc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
-vid@vid.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
oof@oof.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
pomba@pomba.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
vfc@vfc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
DCAE:OBF:1g8u1f9d1f991g8w,admin
POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
ASDC:OBF:1f991j0u1j001f9d,admin
-VID:OBF:1jm91i0v1jl9,admin
ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
OOF:OBF:1img1ke71ily,admin
dcae@dcae.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
policy@policy.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
sdc@sdc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
-vid@vid.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
oof@oof.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
pomba@pomba.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
vfc@vfc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
# ASDC -> sdc@sdc.onap.org
Basic QVNEQzpBU0RD,Basic c2RjQHNkYy5vbmFwLm9yZzpkZW1vMTIzNDU2IQ==,2050-03-03
-# VID -> vid@vid.onap.org
-Basic VklEOlZJRA==,Basic dmlkQHZpZC5vbmFwLm9yZzpkZW1vMTIzNDU2IQ==,2050-03-03
-
# OOF -> oof@oof.onap.org
Basic T09GOk9PRg==,Basic b29mQG9vZi5vbmFwLm9yZzpkZW1vMTIzNDQ2IQ==,2050-03-03
DCAE:OBF:1g8u1f9d1f991g8w,admin
POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
ASDC:OBF:1f991j0u1j001f9d,admin
-VID:OBF:1jm91i0v1jl9,admin
ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
OOF:OBF:1img1ke71ily,admin
dcae@dcae.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
policy@policy.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
sdc@sdc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
-vid@vid.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
oof@oof.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
pomba@pomba.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
vfc@vfc.onap.org:OBF:1fia1ju61l871lfe18xp18xr18xt1lc41l531jrk1fek,admin
spec:
config:
retention.ms: {{ .Values.config.ncmpAsyncM2MTopic.retentionMs }}
+---
+apiVersion: kafka.strimzi.io/v1beta2
+kind: KafkaTopic
+metadata:
+ name: {{ .Values.config.dmiCmEventsTopic.name }}
+ labels:
+ strimzi.io/cluster: {{ include "common.release" . }}-strimzi
+spec:
+ config:
+ retention.ms: {{ .Values.config.dmiCmEventsTopic.retentionMs }}
{{- end }}
\ No newline at end of file
type: topic
name: {{ .Values.config.ncmpAsyncM2MTopic.name }}
operation: All
+ - resource:
+ type: group
+ name: {{ .Values.config.dmiCmEventsTopic.consumer.groupId }}
+ operation: All
+ - resource:
+ type: topic
+ name: {{ .Values.config.dmiCmEventsTopic.name }}
+ operation: All
{{- end }}
\ No newline at end of file
retentionMs: 600000
consumer:
groupId: ncmp-group
+ dmiCmEventsTopic:
+ name: dmi-cm-events
+ retentionMs: 7200000
+ consumer:
+ groupId: ncmp-group
# Enable all CPS components by default
cps-core:
+++ /dev/null
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
-components/
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD
-name: dcaemod
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: dcaemod-genprocessor
- version: ~12.x-0
- repository: 'file://components/dcaemod-genprocessor'
- condition: dcaemod-genprocessor.enabled
- - name: dcaemod-distributor-api
- version: ~12.x-0
- repository: 'file://components/dcaemod-distributor-api'
- condition: dcaemod-distributor-api.enabled
- - name: dcaemod-designtool
- version: ~12.x-0
- repository: 'file://components/dcaemod-designtool'
- condition: dcaemod-designtool.enabled
- - name: dcaemod-onboarding-api
- version: ~12.x-0
- repository: 'file://components/dcaemod-onboarding-api'
- condition: dcaemod-onboarding-api.enabled
- - name: dcaemod-runtime-api
- version: ~12.x-0
- repository: 'file://components/dcaemod-runtime-api'
- condition: dcaemod-runtime-api.enabled
- - name: dcaemod-nifi-registry
- version: ~12.x-0
- repository: 'file://components/dcaemod-nifi-registry'
- condition: dcaemod-nifi-registry.enabled
- - name: dcaemod-healthcheck
- version: ~12.x-0
- repository: 'file://components/dcaemod-healthcheck'
- condition: dcaemod-healthcheck.enabled
+++ /dev/null
-# Copyright © 2020 Samsung Electronics
-# Copyright (c) 2021 AT&T. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
-OUTPUT_DIR := $(ROOT_DIR)/../dist
-PACKAGE_DIR := $(OUTPUT_DIR)/packages
-SECRET_DIR := $(OUTPUT_DIR)/secrets
-
-HELM_REPO := local
-
-EXCLUDES :=
-HELM_BIN := helm
-ifneq ($(SKIP_LINT),TRUE)
- HELM_LINT_CMD := $(HELM_BIN) lint
-else
- HELM_LINT_CMD := echo "Skipping linting of"
-endif
-
-HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
-
-.PHONY: $(EXCLUDES) $(HELM_CHARTS)
-
-all: $(HELM_CHARTS)
-
-$(HELM_CHARTS):
- @echo "\n[$@]"
- @make package-$@
-
-make-%:
- @if [ -f $*/Makefile ]; then make -C $*; fi
-
-dep-%: make-%
- @if [ -f $*/Chart.yaml ]; then $(HELM_BIN) dep up $*; fi
-
-lint-%: dep-%
- @if [ -f $*/Chart.yaml ]; then $(HELM_LINT_CMD) $*; fi
-
-package-%: lint-%
- @mkdir -p $(PACKAGE_DIR)
- @if [ -f $*/Chart.yaml ]; then PACKAGE_NAME=$$($(HELM_BIN) package -d $(PACKAGE_DIR) $* | cut -d":" -f2) && $(HELM_BIN) cm-push -f $$PACKAGE_NAME local; fi
- @sleep 3
- #@$(HELM_BIN) repo index $(PACKAGE_DIR)
-
-clean:
- @rm -f */Chart.lock
- @rm -f *tgz */charts/*tgz
- @rm -rf $(PACKAGE_DIR)
-%:
- @:
+++ /dev/null
-# Copyright © 2020 Samsung Electronics
-# Copyright (c) 2021 AT&T. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
-OUTPUT_DIR := $(ROOT_DIR)/../../dist
-PACKAGE_DIR := $(OUTPUT_DIR)/packages
-SECRET_DIR := $(OUTPUT_DIR)/secrets
-
-HELM_REPO := local
-
-EXCLUDES :=
-HELM_BIN := helm
-ifneq ($(SKIP_LINT),TRUE)
- HELM_LINT_CMD := $(HELM_BIN) lint
-else
- HELM_LINT_CMD := echo "Skipping linting of"
-endif
-
-# Helm v2 and helm v3 uses different version format so we first try in helm v3 format
-# and if it fails then we fallback to helm v2 one
-HELM_VER := $(shell $(HELM_BIN) version --template "{{.Version}}" 2>/dev/null)
-ifneq "$(findstring v3,$(HELM_VER))" "v3"
- HELM_VER := $(shell $(HELM_BIN) version -c --template "{{.Client.SemVer}}")
-endif
-
-HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
-
-.PHONY: $(EXCLUDES) $(HELM_CHARTS)
-
-all: $(HELM_CHARTS) helm-repo-update
-
-$(HELM_CHARTS):
- @echo "\n[$@]"
- @make package-$@
-
-make-%:
- @if [ -f $*/Makefile ]; then make -C $*; fi
-
-dep-%: make-%
- @if [ -f $*/Chart.yaml ]; then $(HELM_BIN) dep up $*; fi
-
-lint-%: dep-%
- @if [ -f $*/Chart.yaml ]; then $(HELM_LINT_CMD) $*; fi
-
-package-%: lint-%
- @mkdir -p $(PACKAGE_DIR)
- @if [ -f $*/Chart.yaml ]; then PACKAGE_NAME=$$($(HELM_BIN) package -d $(PACKAGE_DIR) $* | cut -d":" -f2) && $(HELM_BIN) cm-push -f $$PACKAGE_NAME $(HELM_REPO); fi
- @sleep 3
- #@$(HELM_BIN) repo index $(PACKAGE_DIR)
-
-clean:
- @rm -f */Chart.lock
- @rm -f *tgz */charts/*tgz
- @rm -rf $(PACKAGE_DIR)
-
-helm-repo-update:
-ifeq "$(findstring v3,$(HELM_VER))" "v3"
- @$(HELM_BIN) repo update
-endif
-
-%:
- @:
\ No newline at end of file
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD Design Tool
-name: dcaemod-designtool
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
-spec:
- replicas: 1
- selector: {{- include "common.selectors" . | nindent 4 }}
- template:
- metadata: {{- include "common.templateMetadata" . | nindent 6 }}
- spec:
- initContainers:
- - name: {{ include "common.name" . }}-readiness
- image: {{ include "repositoryGenerator.image.readiness" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- command:
- - /app/ready.py
- args:
- - --container-name
- - dcaemod-genprocessor-http
- - --container-name
- - dcaemod-nifi-registry
- - --container-name
- - dcaemod-distributor-api
- - "-t"
- - "15"
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- - name: {{ include "common.name" . }}-create-bucket
- image: {{ include "repositoryGenerator.image.curl" . }}
- args:
- - -kv
- - -X
- - POST
- - -H
- - "Content-Type: application/json"
- - --data-binary
- - '{"name": "dcaemod-flows"}'
- - http://dcaemod-nifi-registry:18080/nifi-registry-api/buckets
-
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports: {{ include "common.containerPorts" . | nindent 12 }}
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.liveness.port }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end }}
- readinessProbe:
- httpGet:
- path: {{ .Values.readiness.path }}
- port: {{ .Values.readiness.port }}
- scheme: {{ .Values.readiness.scheme }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- resources: {{ include "common.resources" . | nindent 12 }}
- env:
- - name: NIFI_DCAE_JARS_INDEX_URL
- value: {{ .Values.config.nifiJarsIndexURL }}
- - name: NIFI_DCAE_DISTRIBUTOR_API_URL
- value: {{ .Values.config.distributorAPIURL }}
- serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-{{ include "common.ingress" . }}
\ No newline at end of file
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- persistence: {}
- nodePortPrefix: 302
- nodePortPrefixExt: 304
- ingress:
- virtualhost:
- baseurl: "simpledemo.onap.org"
-
-config:
- nifiJarsIndexURL: http://dcaemod-genprocessor:8080/nifi-jars
- distributorAPIURL: /distributor
-
-# application image
-image: onap/org.onap.dcaegen2.platform.mod.designtool-web:1.0.2
-
-service:
- type: ClusterIP
- name: dcaemod-designtool
- ports:
- - name: http
- port: 8080
-
-ingress:
- enabled: true
- enabledOverride: true
- service:
- - baseaddr: "dcaemod-nifi-ui"
- path: "/nifi"
- name: "dcaemod-designtool"
- port: 8080
- - baseaddr: "dcaemod-nifi-api"
- path: "/nifi-api"
- name: "dcaemod-designtool"
- port: 8080
- config:
- ssl: "none"
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 90
- periodSeconds: 30
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
- port: http
-
-readiness:
- initialDelaySeconds: 60
- periodSeconds: 20
- path: /nifi-api/system-diagnostics
- scheme: HTTP
- port: http
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-
-#Pods Service Account
-serviceAccount:
- nameOverride: dcaemod-designtool
- roles:
- - read
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD Distributor API
-name: dcaemod-distributor-api
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
-spec:
- replicas: 1
- selector: {{- include "common.selectors" . | nindent 4 }}
- template:
- metadata: {{- include "common.templateMetadata" . | nindent 6 }}
- spec:
- initContainers:
- - name: {{ include "common.name" . }}-readiness
- image: {{ include "repositoryGenerator.image.readiness" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- command:
- - /app/ready.py
- args:
- - --container-name
- - dcaemod-runtime-api
- - --container-name
- - dcaemod-nifi-registry
- - --container-name
- - dcaemod-onboarding-api
- - "-t"
- - "15"
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports: {{ include "common.containerPorts" . | nindent 12 }}
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.liveness.port }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end }}
- readinessProbe:
- httpGet:
- path: {{ .Values.readiness.path }}
- port: {{ .Values.readiness.port }}
- scheme: {{ .Values.readiness.scheme }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- - name: NIFI_REGISTRY_URL
- value: {{ .Values.config.nifiRegistryURL }}
- - name : ONBOARDING_API_URL
- value: {{ .Values.config.onboardingAPIURL }}
- resources: {{ include "common.resources" . | nindent 12 }}
- serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-{{ include "common.ingress" . }}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- persistence: {}
- nodePortPrefix: 302
- nodePortPrefixExt: 304
- ingress:
- virtualhost:
- baseurl: "simpledemo.onap.org"
-
-config:
- nifiRegistryURL: http://dcaemod-nifi-registry:18080/nifi-registry-api
- onboardingAPIURL: http://dcaemod-onboarding-api:8080/onboarding
-
-# application image
-image: onap/org.onap.dcaegen2.platform.mod.distributorapi:1.1.1
-
-service:
- type: ClusterIP
- name: dcaemod-distributor-api
- ports:
- - name: http
- port: 8080
-
-ingress:
- enabled: true
- enabledOverride: true
- service:
- - baseaddr: "dcaemod-distributor-api"
- path: "/distributor"
- name: dcaemod-distributor-api
- port: 8080
- config:
- ssl: "none"
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 60
- periodSeconds: 30
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
- port: http
-
-readiness:
- initialDelaySeconds: 60
- periodSeconds: 20
- # Should have a proper readiness endpoint
- # This will be OK as long as we have a small number
- # of distribution targets
- path: /distributor/distribution-targets
- scheme: HTTP
- port: http
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-
-#Pods Service Account
-serviceAccount:
- nameOverride: dcaemod-distributor-api
- roles:
- - read
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD Genprocessor
-name: dcaemod-genprocessor
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
-spec:
- replicas: 1
- selector: {{- include "common.selectors" . | nindent 4 }}
- template:
- metadata: {{- include "common.templateMetadata" . | nindent 6 }}
- spec:
- initContainers:
- # apps run as uid 1000, gid 1000
- # the volume is mounted with root permissions
- # this initContainer changes ownership to uid 1000 gid 1000
- # (tried using a securityContext in the pod spec, but it didn't seem to work)
- - name: set-permissions
- image: {{ include "repositoryGenerator.image.busybox" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- command:
- - sh
- - -c
- - chown -R 1000:1000 /genprocessor-data
- volumeMounts:
- - mountPath: /genprocessor-data
- name: genprocessor-data
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports: {{ include "common.containerPorts" . | nindent 12 }}
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.liveness.port }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end }}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.readiness.port }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- - name: GENPROC_ONBOARDING_API_HOST
- value: {{ .Values.config.onboardingAPIURL }}
- volumeMounts:
- - mountPath: /work/
- name: genprocessor-data
- resources: {{ include "common.resources" . | nindent 12 }}
- - name: {{ include "common.name" . }}-http
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.httpImage }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- volumeMounts:
- - mountPath: /www/data
- name: genprocessor-data
- readOnly: true
- serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
- volumes:
- - name: genprocessor-data
- persistentVolumeClaim:
- claimName: {{ include "common.fullname" . }}
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-{{ include "common.ingress" . }}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.PV" . }}
+++ /dev/null
-{{/*
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.PVC" . }}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- persistence: {}
- nodePortPrefix: 302
- nodePortPrefixExt: 304
- ingress:
- virtualhost:
- baseurl: "simpledemo.onap.org"
-
-config:
- onboardingAPIURL: http://dcaemod-onboarding-api:8080/onboarding
-
-# application image
-image: onap/org.onap.dcaegen2.platform.mod.genprocessor-job:1.0.2
-httpImage: onap/org.onap.dcaegen2.platform.mod.genprocessor-http:1.0.2
-
-service:
- type: ClusterIP
- name: dcaemod-genprocessor
- ports:
- - name: http
- port: 8080
-
-ingress:
- enabled: true
- enabledOverride: true
- service:
- - baseaddr: "dcaemod-genprocessor-api"
- path: "/nifi-jars"
- name: dcaemod-genprocessor
- port: 8080
- config:
- ssl: "none"
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 60
- periodSeconds: 30
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
- port: http
-
-readiness:
- initialDelaySeconds: 60
- periodSeconds: 20
- port: http
- # Should have a proper readiness endpoint or script
-
-# Parameters for persistent storage
-persistence:
- enabled: true
-# Only the genprocessor-job writes, genprocessor-http mounts readOnly
- accessMode: ReadWriteMany
- size: 4Gi
- mountPath: /dockerdata-nfs
- mountSubPath: dcae-mod-genprocessor/data
- volumeReclaimPolicy: Retain
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-
-#Pods Service Account
-serviceAccount:
- nameOverride: dcaemod-genprocessor
- roles:
- - read
-
+++ /dev/null
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD Health Check
-name: dcaemod-healthcheck
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
-spec:
- selector: {{- include "common.selectors" . | nindent 4 }}
- replicas: 1
- template:
- metadata: {{- include "common.templateMetadata" . | nindent 6 }}
- spec:
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- resources:
-{{ include "common.resources" . | indent 12 }}
- ports: {{ include "common.containerPorts" . | nindent 10 }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ include "common.getPort" (dict "global" . "name" "http") }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ include "common.getPort" (dict "global" . "name" "http") }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- volumeMounts:
- - mountPath: /opt/app/expected-components.json
- subPath: expected-components.json
- name: {{ include "common.fullname" .}}-expected-components
- env:
- - name: DCAE_NAMESPACE
- value: {{ .Values.dcae_ns }}
- - name: ONAP_NAMESPACE
- value: {{ include "common.namespace" . }}
- - name: HELM_RELEASE
- value: {{ include "common.release" . }}
- serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
- volumes:
- - name: {{ include "common.fullname" . }}-expected-components
- configMap:
- name: {{ include "common.release" . }}-dcaemod-expected-components
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2018-2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
-# Copyright (c) 2021 J. F. Lucas. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
-
-service:
- name: dcaemod-healthcheck
- type: ClusterIP
- ports:
- - name: http
- port: 8080
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-# application image
-image: onap/org.onap.dcaegen2.deployments.healthcheck-container:2.4.0
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-
-#Pods Service Account
-serviceAccount:
- nameOverride: dcaemod-healthcheck
- roles:
- - read
-
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD Nifi Registry
-name: dcaemod-nifi-registry
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
-spec:
- replicas: 1
- selector: {{- include "common.selectors" . | nindent 4 }}
- template:
- metadata: {{- include "common.templateMetadata" . | nindent 6 }}
- spec:
- initContainers:
- # nifi-registry app runs as user "nifi", uid 1000, group "nifi", gid 1000
- # the volume is mounted with root permissions
- # this initContainer changes ownership to uid 1000 gid 1000
- # (tried using a securityContext in the pod spec, but it didn't seem to work)
- - name: set-permissions
- image: {{ include "repositoryGenerator.image.busybox" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- command:
- - sh
- - -c
- - chown -R 1000:1000 /opt/nifi-registry/nifi-registry-0.4.0/flow_storage
- volumeMounts:
- - mountPath: /opt/nifi-registry/nifi-registry-0.4.0/flow_storage
- name: flow-storage
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports: {{ include "common.containerPorts" . | nindent 12 }}
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.liveness.port }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end }}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.readiness.port }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- volumeMounts:
- - mountPath: /opt/nifi-registry/nifi-registry-0.4.0/flow_storage
- name: flow-storage
- resources: {{ include "common.resources" . | nindent 12 }}
- env:
- - name: NIFI_REGISTRY_DB_URL
- value: {{ .Values.config.dbURL }}
- - name: NIFI_REGISTRY_DB_USER
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dbsecret" "key" "login") | indent 12 }}
- - name: NIFI_REGISTRY_DB_PASS
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dbsecret" "key" "password") | indent 12 }}
- serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
- volumes:
- - name: flow-storage
- persistentVolumeClaim:
- claimName: {{ include "common.fullname" . }}
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-
-{{ include "common.PV" . }}
+++ /dev/null
-{{/*
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.PVC" . }}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-{{ include "common.secretFast" . }}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- persistence: {}
- nodePortPrefix: 302
- nodePortPrefixExt: 304
-
-config:
- dbURL: jdbc:h2:./database/nifi-registry-primary
- dbUser: nobody
- dbPassword: nobody
-
-secrets:
- - uid: "dbsecret"
- type: basicAuth
- login: '{{ .Values.config.dbUser }}'
- password: '{{ .Values.config.dbPassword }}'
- passwordPolicy: generate
-
-# application image
-image: apache/nifi-registry:0.5.0
-
-service:
- type: ClusterIP
- name: dcaemod-nifi-registry
- ports:
- - name: http
- port: 18080
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 60
- periodSeconds: 30
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
- port: http
-
-readiness:
- initialDelaySeconds: 60
- periodSeconds: 20
- port: http
- # Should have a proper readiness endpoint or script
-
-# Parameters for persistent storage
-persistence:
- enabled: true
- accessMode: ReadWriteOnce
- size: 4Gi
- mountPath: /dockerdata-nfs
- mountSubPath: dcae-mod-nifi-registry/data
- volumeReclaimPolicy: Retain
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-
-#Pods Service Account
-serviceAccount:
- nameOverride: dcaemod-nifi-registry
- roles:
- - read
+++ /dev/null
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD Onboarding API
-name: dcaemod-onboarding-api
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: postgres
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
-spec:
- replicas: 1
- selector: {{- include "common.selectors" . | nindent 4 }}
- template:
- metadata: {{- include "common.templateMetadata" . | nindent 6 }}
- spec:
- initContainers:
- - name: {{ include "common.name" . }}-readiness
- image: {{ include "repositoryGenerator.image.readiness" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- command:
- - /app/ready.py
- args:
- - --container-name
- - {{ .Values.postgres.nameOverride }}
- - "-t"
- - "15"
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- containers:
- - name: {{ include "common.name" . }}
- command:
- - sh
- args:
- - -c
- - 'PG_CONN=postgresql://${PG_USER}:${PG_PASSWORD}@${PG_ADDR}:${PG_PORT}/${PG_DB_NAME} ./start.sh'
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports: {{ include "common.containerPorts" . | nindent 12 }}
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.liveness.port }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end }}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.readiness.port }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- resources: {{ include "common.resources" . | nindent 12 }}
- env:
- - name: PG_ADDR
- value: {{ .Values.postgres.service.name2 }}
- # This should be kept in secret but it needs a fix in postgres common chart
- - name: PG_USER
- value: postgres
- - name: PG_PASSWORD
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 14 }}
- - name: PG_PORT
- value: "5432"
- - name: PG_DB_NAME
- value: dcae_onboarding_db
- serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-{{ include "common.ingress" . }}
+++ /dev/null
-{{/*
-# Copyright © 2020 Samsung Electronics
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{ include "common.secretFast" . }}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- nodePortPrefixExt: 304
- ingress:
- virtualhost:
- baseurl: "simpledemo.onap.org"
-
-#################################################################
-# Secrets metaconfig
-#################################################################
-secrets:
- - uid: db-root-pass
- name: &rootPassSecretName '{{ include "common.release" . }}-dcaemod-db-root-pass'
- type: password
- externalSecret: '{{ ternary "" (tpl (default "" .Values.postgres.config.pgRootPasswordExternalSecret) .) (hasSuffix "dcaemod-db-root-pass" .Values.postgres.config.pgRootPasswordExternalSecret)}}'
- password: '{{ .Values.postgres.config.pgRootPassword }}'
- - uid: db-primary-pass
- name: &primaryPassSecretName '{{ include "common.release" . }}-dcaemod-db-primary-pass'
- type: password
- externalSecret: '{{ ternary "" (tpl (default "" .Values.postgres.config.pgPrimaryPasswordExternalSecret) .) (hasSuffix "dcaemod-db-primary-pass" .Values.postgres.config.pgPrimaryPasswordExternalSecret)}}'
- password: '{{ .Values.postgres.config.pgPrimaryPassword }}'
-
-service:
- type: ClusterIP
- name: dcaemod-onboarding-api
- ports:
- - name: http
- port: 8080
-ingress:
- enabled: true
- enabledOverride: true
- service:
- - baseaddr: "dcaemod-onboarding-api"
- path: "/onboarding"
- name: dcaemod-onboarding-api
- port: 8080
- config:
- ssl: "none"
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 60
- periodSeconds: 30
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
- port: http
-
-readiness:
- initialDelaySeconds: 60
- periodSeconds: 20
- port: http
- # Should have a proper readiness endpoint or script
-
-# postgres values--overriding defaults in the postgres subchart
-postgres:
- nameOverride: dcaemod-db
- service:
- name: dcaemod-postgres
- name2: dcaemod-pg-primary
- name3: dcaemod-pg-replica
- suffix: svc.cluster.local
- container:
- name:
- primary: dcaemod-pg-primary
- replica: dcaemod-pg-replica
- config:
- pgPrimaryPasswordExternalSecret: *primaryPassSecretName
- pgRootPasswordExternalSecret: *rootPassSecretName
- persistence:
- mountSubPath: dcaemod/data
- mountInitPath: dcaemod
-
-# application image
-image: onap/org.onap.dcaegen2.platform.mod.onboardingapi:2.13.0
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-
-#Pods Service Account
-serviceAccount:
- nameOverride: dcaemod-onboarding-api
- roles:
- - read
-
+++ /dev/null
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-description: ONAP DCAE MOD Runtime API
-name: dcaemod-runtime-api
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
- - name: readinessCheck
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-{{ if and .Values.certDirectory .Values.global.cmpv2Enabled .Values.global.CMPv2CertManagerIntegration }}
-{{ include "certManagerCertificate.certificate" . }}
-{{ end }}
\ No newline at end of file
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2021-2022 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-apiVersion: v2
-appVersion: "Kohn"
-description: TBD
-name: TBD
-version: TBD
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
- - name: readinessCheck
- version: ~12.x-0
- repository: '@local'
- - name: dcaegen2-services-common
- version: ~12.x-0
- repository: '@local'
- - name: postgres
- version: ~12.x-0
- repository: '@local'
- condition: postgres.enabled
- - name: serviceAccount
- version: ~12.x-0
- repository: '@local'
- - name: mongo
- version: ~12.x-0
- repository: '@local'
- condition: mongo.enabled
+++ /dev/null
-{{ include "dcaegen2-services-common.configMap" . }}
+++ /dev/null
-{{ include "dcaegen2-services-common.microserviceDeployment" . }}
\ No newline at end of file
+++ /dev/null
-{{ include "common.secretFast" . }}
+++ /dev/null
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2021-2022 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- nodePortPrefixExt: 304
-
-#################################################################
-# initContainer images.
-#################################################################
-tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-image: TBD #DONE
-pullPolicy: Always
-
-#policy sync image
-dcaePolicySyncImage: onap/org.onap.dcaegen2.deployments.dcae-services-policy-sync:1.0.1
-
-#postgres enable/disable
-postgres:
- enabled: false
-
-#mongo enable/disable
-mongo:
- enabled: false
- nameOverride: dcae-mongo
- config:
- dbName: dcaecommondb
- service:
- name: dcae-mongohost
- internalPort: 27017
- nfsprovisionerPrefix: dcaemongo
- sdnctlPrefix: tcagen2
- persistence:
- mountSubPath: dcae/mongo/data
- enabled: true
- disableNfsProvisioner: true
-
-# log directory where logging sidecar should look for log files
-# if absent, no sidecar will be deployed
-#log:
-# path: TBD #/opt/app/VESCollector/logs #DONE
-logConfigMapNamePrefix: '{{ include "common.fullname" . }}'
-
-# directory where TLS certs should be stored
-# if absent, no certs will be retrieved and stored
-#certDirectory: TBD #/opt/app/dcae-certificate #DONE
-
-# TLS role -- set to true if microservice acts as server
-# If true, an init container will retrieve a server cert
-# and key from AAF and mount them in certDirectory.
-#tlsServer: TBD #DONE
-
-# dependencies
-readinessCheck:
- wait_for:
- - aaf-cm
-
-# probe configuration #NEED DISCUSSION
-readiness:
- initialDelaySeconds: TBD
- periodSeconds: TBD
- path: TBD
- scheme: TBD
- port: TBD
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-serviceAccount:
- nameOverride: TBD
- roles:
- - read
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2021 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-dcae-helmgen-templates
- namespace: {{ include "common.namespace" . }}
-data:
-{{ (.Files.Glob "resources/config/base/templates/*.yaml").AsConfig | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-dcae-helmgen-base
- namespace: {{ include "common.namespace" . }}
-data:
-{{ (.Files.Glob "resources/config/base/*.yaml").AsConfig | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-dcae-helmgen-addons-templates
- namespace: {{ include "common.namespace" . }}
-data:
-{{ (.Files.Glob "resources/config/addons/templates/*").AsConfig | indent 2 }}
\ No newline at end of file
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2021 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
-spec:
- replicas: 1
- selector: {{- include "common.selectors" . | nindent 4 }}
- template:
- metadata: {{- include "common.templateMetadata" . | nindent 6 }}
- spec:
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports: {{ include "common.containerPorts" . | nindent 12 }}
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.liveness.port }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end }}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.readiness.port }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- resources: {{ include "common.resources" . | nindent 12 }}
- volumeMounts:
- - mountPath: {{ .Values.config.basehelmchartlocation }}/base/values.yaml
- subPath: values.yaml
- name: dcae-helmgen-base
- - mountPath: {{ .Values.config.basehelmchartlocation }}/base/Chart.yaml
- subPath: Chart.yaml
- name: dcae-helmgen-base
- - mountPath: {{ .Values.config.basehelmchartlocation }}/base/templates
- name: dcae-helmgen-templates
- - mountPath: {{ .Values.config.basehelmchartlocation }}/addons/templates
- name: dcae-helmgen-addon-templates
- env:
- - name: DASHBOARD_URL
- value: {{ .Values.config.dashboardURL }}
- - name: DASHBOARD_USERNAME
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dashsecret" "key" "login") | indent 14 }}
- - name: DASHBOARD_PASSWORD
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "dashsecret" "key" "password") | indent 14 }}
- - name: ONAP_TOPICURL
- value: {{ .Values.config.mrTopicURL }}
- - name: ONAP_IMPORT_CLOUDIFYPLUGIN
- value: {{ .Values.config.importCloudify }}
- - name: ONAP_IMPORT_K8SPLUGIN
- value: {{ .Values.config.importK8S }}
- - name: ONAP_IMPORT_POLICYPLUGIN
- value: {{ .Values.config.importPolicy }}
- - name: ONAP_IMPORT_POSTGRESPLUGIN
- value: {{ .Values.config.importPostgres }}
- - name: ONAP_IMPORT_CLAMPPLUGIN
- value: {{ .Values.config.importClamp }}
- - name: ONAP_IMPORT_DMAAPPLUGIN
- value: {{ .Values.config.importDMaaP }}
- - name: ONAP_USEDMAAPPLUGIN
- value: {{ .Values.config.useDmaapPlugin | quote }}
- - name: BP_RESOURCES_CPU_LIMIT
- value: {{ .Values.config.bpResourcesCpuLimit }}
- - name: BP_RESOURCES_MEMORY_LIMIT
- value: {{ .Values.config.bpResourcesMemoryLimit }}
- - name: ARTIFACT_TYPE
- value: {{ .Values.config.artifactType }}
- - name: CHARTMUSEUM_BASEURL
- value: {{ .Values.config.registryBaseurl }}
- - name: HELM_BASE_CHART_TEMPLATE_LOCATION
- value: {{ .Values.config.basehelmchartlocation }}
- - name: CHARTMUSEUM_AUTH_BASIC_USERNAME
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "registrycred" "key" "login") | indent 14 }}
- - name: CHARTMUSEUM_AUTH_BASIC_PASSWORD
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "registrycred" "key" "password") | indent 14 }}
- serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
- volumes:
- - name: dcae-helmgen-templates
- configMap:
- name: {{ include "common.fullname" . }}-dcae-helmgen-templates
- - name: dcae-helmgen-base
- configMap:
- name: {{ include "common.fullname" . }}-dcae-helmgen-base
- - name: dcae-helmgen-addon-templates
- configMap:
- name: {{ include "common.fullname" . }}-dcae-helmgen-addons-templates
\ No newline at end of file
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.secretFast" . }}
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2019-2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-{{ include "common.service" . }}
+++ /dev/null
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2019-2021 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- nodePortPrefixExt: 304
-
-config:
- dashboardURL: https://inventory:8080/dcae-service-types
- # The dashboard credentials aren't actually used, since
- # the inventory API and the dashboard pass-through to the
- # inventory API don't require authentication.
- # Since the password doesn't matter, we let it be
- # generated by the common secret template.
- dashboardUser: nobody
- #dashboardPassword: doesntmatter
- mrTopicURL: http://message-router:3904/events
- importCloudify: https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- importK8S: plugin:k8splugin?version=>=3.5.1,<4.0.0
- importPostgres: plugin:pgaas?version=1.3.0
- importClamp: plugin:clamppolicyplugin?version=1.1.1
- importDMaaP: plugin:dmaap?version=>=1.5.1,<2.0.0
- useDmaapPlugin: false
- bpResourcesCpuLimit: 250m
- bpResourcesMemoryLimit: 128Mi
- artifactType: "HELM"
- registryBaseurl: http://chart-museum:80
- basehelmchartlocation: /helm-gen/
-
-
-secrets:
- - uid: "dashsecret"
- type: basicAuth
- login: '{{ .Values.config.dashboardUser }}'
- password: '{{ .Values.config.dashboardPassword }}'
- passwordPolicy: generate
- - uid: registrycred
- type: basicAuth
- login: '{{ .Values.registryCred.username }}'
- password: '{{ .Values.registryCred.password }}'
- passwordPolicy: required
-
-# Below parameter should match setting in all clients
-# including oom\kubernetes\platform\components\chartmuseum
-# where ONAP registry is setup
-registryCred:
- username: onapinitializer
- password: demo123456!
-
-service:
- type: ClusterIP
- name: dcaemod-runtime-api
- ports:
- - name: http
- port: 9090
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 60
- periodSeconds: 30
- port: http
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 60
- periodSeconds: 20
- port: http
- # Should have a proper readiness endpoint or script
-
-# dependencies
-#readinessCheck:
-# wait_for:
-# - chart-museum
-
-
-# application image
-image: onap/org.onap.dcaegen2.platform.mod.runtime-web:1.3.3
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
- memory: 1Gi
- large:
- limits:
- cpu: 4
- memory: 4Gi
- requests:
- cpu: 2
- memory: 2Gi
- unlimited: {}
-
-#Pods Service Account
-serviceAccount:
- nameOverride: dcaemod-runtime-api
- roles:
- - read
+++ /dev/null
-[
-{{- $ctx := . }}
-{{- $components := tuple "dcaemod-designtool" "dcaemod-distributor-api" "dcaemod-genprocessor" "dcaemod-nifi-registry" "dcaemod-onboarding-api" "dcaemod-runtime-api" }}
-{{- range $i, $v := $components }}
-{{- if index $ctx.Values . "enabled" }}
-{{- if $i }},{{ end }}
-{{ $v | quote | indent 2 }}
-{{- end -}}
-{{- end }}
-]
\ No newline at end of file
+++ /dev/null
-{{/*
-#============LICENSE_START========================================================
-# ================================================================================
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.release" . }}-dcaemod-expected-components
- namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/*").AsConfig . | indent 2 }}
+++ /dev/null
-# Copyright (c) 2020 AT&T Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
-
-# Enable all DCAE MOD components by default
-dcaemod-designtool:
- enabled: true
-dcaemod-distributor-api:
- enabled: true
-dcaemod-genprocessor:
- enabled: true
-dcaemod-healthcheck:
- enabled: true
-dcaemod-nifi-registry:
- enabled: true
-dcaemod-onboarding-api:
- enabled: true
-dcaemod-runtime-api:
- enabled: true
\ No newline at end of file
version: ~12.x-0
repository: '@local'
condition: dcaegen2-services.enabled
- - name: dcaemod
- version: ~12.x-0
- repository: '@local'
- condition: dcaemod.enabled
- name: holmes
version: ~12.x-0
repository: '@local'
version: ~12.x-0
repository: '@local'
condition: vfc.enabled
- - name: vid
- version: ~12.x-0
- repository: '@local'
- condition: vid.enabled
- name: vnfsdk
version: ~12.x-0
repository: '@local'
enabled: false
uui:
enabled: false
-vid:
- enabled: false
vfc:
enabled: false
vnfsdk:
enabled: false
vfc:
enabled: false
-vid:
- enabled: false
vnfsdk:
enabled: false
enabled: false
vfc:
enabled: false
-vid:
- enabled: false
vnfsdk:
enabled: false
# This override file is used to deploy a minimal configuration to
# onboard and deploy a VNF.
# It includes the following components:
-# A&AI, Cassandra, DMAAP Message Router, Portal, Robot, SDC, SDNC, SO, STRIMZI Kafka, VID
+# A&AI, Cassandra, DMAAP Message Router, Portal, Robot, SDC, SDNC, SO, STRIMZI Kafka
#
# Minimal resources are also reviewed for the various containers
# A&AI: no override => to be fixed
# SO: no override
# SDC: new values
# SDNC: no override
-# VID: no override
#
# Replica are set to 1 (A&AI Cassandra)
#
enabled: false
uui:
enabled: false
-vid:
- enabled: true
vfc:
enabled: false
vnfsdk:
enabled: true
vfc:
enabled: false
-vid:
- enabled: false
vnfsdk:
enabled: false
modeling:
enabled: true
dcae-ves-openapi-manager:
enabled: true
-dcaemod:
- enabled: true
holmes:
enabled: true
dmaap:
enabled: true
vfc:
enabled: true
-vid:
- enabled: false
vnfsdk:
enabled: true
modeling:
enabled: true
dcaegen2-services:
enabled: true
-dcaemod:
- enabled: true
holmes:
enabled: true
dmaap:
enabled: true
vfc:
enabled: true
-vid:
- enabled: true
- ingress:
- enabled: true
vnfsdk:
enabled: true
enabled: true
dcae-ves-openapi-manager:
enabled: true
-dcaemod:
- enabled: true
holmes:
enabled: true
dmaap:
enabled: true
vfc:
enabled: true
-vid:
- enabled: false
vnfsdk:
enabled: true
modeling:
enabled: true
strimzi-kafka-bridge:
enabled: false
-vid:
- enabled: true
enabled: true
uui:
enabled: false
-vid:
- enabled: false
vfc:
enabled: false
vnfsdk:
enabled: false
dcaegen2-services:
enabled: false
-dcaemod:
- enabled: false
holmes:
enabled: false
dmaap:
enabled: false
vfc:
enabled: false
-vid:
- enabled: false
vnfsdk:
enabled: false
modeling:
+++ /dev/null
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v2
-description: ONAP Virtual Infrastructure Deployment
-name: vid
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- # local reference to common chart, as it is
- # a part of this chart's package and will not
- # be published independently to a repo (at this point)
- repository: '@local'
- - name: certInitializer
- version: ~12.x-0
- repository: '@local'
- - name: mariadb-galera
- version: ~12.x-0
- repository: '@local'
- condition: global.mariadbGalera.localCluster
- - name: mariadb-init
- version: ~12.x-0
- repository: '@local'
- condition: not global.mariadbGalera.localCluster
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
+++ /dev/null
-#!/bin/sh
-{{/*
-# Copyright © 2018 AT&T
-# Copyright © 2020 Aarna Networks
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-DB={{index .Values "mariadb-galera" "db" "name" | upper }}
-eval "MYSQL_USER=\$MYSQL_USER_${DB}"
-eval "MYSQL_PASSWORD=\$MYSQL_PASSWORD_${DB}"
-
-#echo "Going to run mysql ${DB} -u${MYSQL_USER} -p${MYSQL_PASSWORD} -h${DB_HOST} -P${DB_PORT} ..."
-mysql -u${MYSQL_USER} -p${MYSQL_PASSWORD} -h${DB_HOST} -P${DB_PORT} <<'EOD'
-CREATE TABLE IF NOT EXISTS `{{index .Values "mariadb-galera" "db" "name" }}`.`schema_info` (
-`SCHEMA_ID` VARCHAR(25) NOT NULL,
-`SCHEMA_DESC` VARCHAR(75) NOT NULL,
-`DATASOURCE_TYPE` VARCHAR(100) NULL DEFAULT NULL,
-`CONNECTION_URL` VARCHAR(200) NOT NULL,
-`USER_NAME` VARCHAR(45) NOT NULL,
-`PASSWORD` VARCHAR(45) NULL DEFAULT NULL,
-`DRIVER_CLASS` VARCHAR(100) NOT NULL,
-`MIN_POOL_SIZE` INT(11) NOT NULL,
-`MAX_POOL_SIZE` INT(11) NOT NULL,
-`IDLE_CONNECTION_TEST_PERIOD` INT(11) NOT NULL)
-ENGINE = InnoDB
-DEFAULT CHARACTER SET = utf8;
-EOD
-
-if [ $? -ne 0 ];then
- echo "ERROR: Failed to run cmd vid-pre-init.sql"
- exit 1
-else
- echo "INFO: Database initialized successfully"
-fi
+++ /dev/null
-{{/*
-# Copyright © 2018 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- clean_inactive: 96h
-
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ================================================================================
- eCOMP Portal SDK
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ================================================================================
- -->
-<configuration scan="true" scanPeriod="3 seconds" debug="true">
- <!-- specify the component name -->
- <property name="componentName" value="vid"/>
- <!-- specify the base path of the log directory -->
- <property name="logDirPrefix" value="/var/log/onap" />
- <!-- The directory where logs are written -->
- <property name="logDirectory" value="${logDirPrefix}/${componentName}" />
-
- <!-- log file names -->
- <property name="generalLogName" value="application" />
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="outgoingRequestsLogName" value="outgoingRequests" />
-
- <!-- other constants -->
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
-
- <!-- ONAP Application Logging Specification v1.2 (Casablanca)
- https://wiki.onap.org/pages/viewpage.action?pageId=28378955 -->
-
- <property name="auditLoggerPattern"
- value="%X{EntryTimestamp}|%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX,UTC}|%X{RequestID}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level||%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|||%marker|%mdc|||%msg%n"/>
-
- <property name="metricsLoggerPattern"
- value="%X{InvokeTimestamp}|%X{LogTimestamp}|%X{RequestID}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|0|%X{ServerIPAddress}|%replace(%X{ElapsedTime}){' ms',''}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVisualEntity}|%marker|%mdc|%X{CustomField3}|%X{CustomField4}| %msg%nopexception%n" />
-
- <property name="errorLoggerPattern"
- value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestID}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode:-900}|%replace(%msg){'[\r\n]+', '\\\\n'}|%nopexception%replace(%xThrowable){'[\r\n]+', '\\\\n'}%n" />
-
- <property name="debugLoggerPattern" value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestID}|%msg %nopexception%replace(%xThrowable){'[\r\n]+', '\\\\n'}|^%n" />
-
- <!-- use %class so library logging calls yield their class name -->
- <property name="applicationLoggerPattern"
- value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestID}|%thread|%.-5level|%class{36}| %msg%n" />
-
-
-
- <!-- Example evaluator filter applied against console appender -->
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
- <encoder>
- <pattern>${debugLoggerPattern}</pattern>
- </encoder>
- </appender>
-
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
-
- <!-- The EELFAppender is used to record events to the general application log -->
- <appender name="EELF" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${generalLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${applicationLoggerPattern}</pattern>
- </encoder>
- <filter class="org.onap.portalapp.util.CustomLoggingFilter" />
- </appender>
-
- <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <includeCallerData>true</includeCallerData>
- <appender-ref ref="EELF" />
- </appender>
-
- <!-- EELF Security Appender. This appender is used to record security events
- to the security log file. Security events are separate from other loggers
- in EELF so that security log records can be captured and managed in a secure
- way separate from the other logs. This appender is set to never discard any
- events. -->
- <!--
- <appender name="EELFSecurity"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${securityLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <discardingThreshold>0</discardingThreshold>
- <appender-ref ref="EELFSecurity" />
- </appender>
- -->
- <!-- EELF Performance Appender. This appender is used to record performance
- records. -->
- <!--
- <appender name="EELFPerformance"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${performanceLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <outputPatternAsHeader>true</outputPatternAsHeader>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFPerformance" />
- </appender>
- -->
- <!-- EELF Server Appender. This appender is used to record Server related
- logging events. The Server logger and appender are specializations of the
- EELF application root logger and appender. This can be used to segregate Server
- events from other components, or it can be eliminated to record these events
- as part of the application root log. -->
- <!--
- <appender name="EELFServer"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${serverLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFServer" />
- </appender>
- -->
- <!-- EELF Policy Appender. This appender is used to record Policy engine
- related logging events. The Policy logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <!--
- <appender name="EELFPolicy"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${policyLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFPolicy" />
- </appender>
- -->
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <appender name="EELFAudit" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${auditLoggerPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
- <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
- <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
- <marker>INVOKE</marker>
- <marker>INVOKE-RETURN</marker>
- </evaluator>
- <onMismatch>DENY</onMismatch>
- <onMatch>ACCEPT</onMatch>
- </filter>
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${metricsLoggerPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
- <appender name="EELFError" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.classic.filter.LevelFilter">
- <level>ERROR</level>
- <onMatch>ACCEPT</onMatch>
- <onMismatch>NEUTRAL</onMismatch>
- </filter>
- <filter class="ch.qos.logback.classic.filter.LevelFilter">
- <level>WARN</level>
- <onMatch>ACCEPT</onMatch>
- <onMismatch>DENY</onMismatch>
- </filter>
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${errorLoggerPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
- <appender name="EELFDebug" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${debugLoggerPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
- <appender name="OutgoingRequests" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${outgoingRequestsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${outgoingRequestsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${debugLoggerPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncOutgoingRequests" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="OutgoingRequests" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
-
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger name="com.att.eelf" level="debug" additivity="false">
- <appender-ref ref="asyncEELF" />
- </logger>
-
- <!--
- <logger name="com.att.eelf.security" level="info" additivity="false">
- <appender-ref ref="asyncEELFSecurity" />
- </logger>
- <logger name="com.att.eelf.perf" level="info" additivity="false">
- <appender-ref ref="asyncEELFPerformance" />
- </logger>
- <logger name="com.att.eelf.server" level="info" additivity="false">
- <appender-ref ref="asyncEELFServer" />
- </logger>
- <logger name="com.att.eelf.policy" level="info" additivity="false">
- <appender-ref ref="asyncEELFPolicy" />
- </logger>
- -->
-
- <logger name="org.onap.logging.filter.base.AbstractAuditLogFilter" level="info" additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
-
- <logger name="org.onap.logging.filter.base.AbstractMetricLogFilter" level="info" additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
-
- <logger name="com.att.eelf.error" level="info" additivity="false">
- <appender-ref ref="asyncEELFError" />
- <appender-ref ref="asyncEELFDebug" />
- </logger>
-
- <logger name="com.att.eelf.debug" level="debug" additivity="false">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
-
- <logger name="http.requests.outgoing" level="DEBUG" additivity="false">
- <appender-ref ref="asyncOutgoingRequests"/>
- </logger>
-
- <root level="INFO">
- <appender-ref ref="asyncEELF" />
- <appender-ref ref="asyncEELFError" />
- </root>
-
-</configuration>
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-log-configmap
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/log/vid/*").AsConfig . | indent 2 }}
----
-{{ include "common.log.configMap" . }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-db-init
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/db_cmd.sh").AsConfig . | indent 2 }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Copyright © 2020 Samsung Electronics
-# Copyright © 2021 Orange
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
- - command:
- - /app/ready.py
- args:
- - --job-name
- - {{ include "common.fullname" . }}-mariadb-init-config-job
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ include "repositoryGenerator.image.readiness" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: {{ include "common.name" . }}-readiness
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- {{- if .Values.global.aafEnabled }}
- command:
- - sh
- args:
- - -c
- - |
- export $(cat {{ .Values.certInitializer.credsPath }}/mycreds.prop | xargs -0)
- export VID_TRUSTSTORE_PLAIN_PASSWORD=${VID_TRUSTSTORE_PASSWORD}
- export VID_TRUSTSTORE_PASSWORD=`java -cp /usr/local/tomcat/webapps/vid/WEB-INF/lib/jetty-util-9.4.20.v20190813.jar org.eclipse.jetty.util.security.Password ${VID_TRUSTSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
- /tmp/vid/localize.sh
- {{- end }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- - name: ASDC_CLIENT_REST_HOST
- value: sdc-be.{{ include "common.namespace" . }}
- - name: ASDC_CLIENT_REST_AUTH
- value: "{{ .Values.config.asdcclientrestauth }}"
- - name: ASDC_CLIENT_REST_PORT
- value: "{{ .Values.config.asdcclientrestport }}"
- - name: ASDC_CLIENT_REST_PROTOCOL
- value: "https"
- - name: VID_AAI_URL
- value: https://aai.{{ include "common.namespace" . }}:{{ .Values.config.vidaaiport }}
- - name: VID_ECOMP_SHARED_CONTEXT_REST_URL
- value: http://portal-app.{{ include "common.namespace" . }}:{{ .Values.config.onapport }}/ONAPPORTAL/context
- - name: VID_MSO_SERVER_URL
- value: http://so.{{ include "common.namespace" . }}:{{ .Values.config.msoport }}/onap/so/infra
- - name: VID_MSO_PASS
- value: "{{ .Values.config.vidmsopass }}"
- - name: MSO_DME2_SERVER_URL
- value: "{{ .Values.config.msodme2serverurl }}"
- - name: MSO_DME2_ENABLED
- value: {{ .Values.global.debugEnabled | default .Values.debugEnabled | quote }}
- - name: VID_ECOMP_REDIRECT_URL
- value: https://{{ .Values.config.portalhost }}:{{ .Values.config.onapport }}/ONAPPORTAL/login.htm
- - name: VID_ECOMP_REST_URL
- value: https://portal-app:{{ .Values.config.onapportrest }}/ONAPPORTAL/auxapi
- - name: VID_ROLE_ACCESS_CENTRALIZED
- value: "{{ .Values.config.roleaccesscentralized }}"
- - name: VID_CONTACT_US_LINK
- value: "{{ .Values.config.vidcontactuslink }}"
- - name: VID_UEB_URL_LIST
- value: message-router.{{ include "common.namespace" . }}
- - name: VID_MYSQL_HOST
- value: {{ include "common.mariadbService" . }}
- - name: VID_MYSQL_PORT
- value: "{{ include "common.mariadbPort" . }}"
- - name: VID_MYSQL_DBNAME
- value: {{ index .Values "mariadb-galera" "db" "name" }}
- - name: VID_MYSQL_USER
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "vid-db-user-secret" "key" "login") | indent 14 }}
- - name: VID_MYSQL_PASS
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "vid-db-user-secret" "key" "password") | indent 14 }}
- - name: VID_MYSQL_MAXCONNECTIONS
- value: "{{ .Values.config.vidmysqlmaxconnections }}"
- {{- if .Values.global.aafEnabled }}
- - name: VID_KEYSTORE_FILENAME
- value: "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.jks"
- - name: VID_TRUSTSTORE_FILENAME
- value: "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks"
- {{- end }}
- volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: "{{ .Values.log.path }}"
- name: vid-logs
- - mountPath: /tmp/logback.xml
- name: vid-logback
- subPath: logback.xml
- - mountPath: /opt/app/vid
- name: vid-cache
- resources:
-{{ include "common.resources" . | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
- # side car containers
- {{ include "common.log.sidecar" . | nindent 8 }}
- volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
- - name: localtime
- hostPath:
- path: /etc/localtime
- {{ include "common.log.volumes" . | nindent 8 }}
- - name: vid-cache
- emptyDir: {}
- - name: vid-logs
- emptyDir: {}
- - name: vid-logback
- configMap:
- name: {{ include "common.fullname" . }}-log-configmap
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{ include "common.ingress" . }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Copyright © 2020 Samsung Electronics
-# Copyright © 2021 Orange
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{ include "common.secretFast" . }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ include "common.servicename" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ include "common.servicename" . }}-http
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- type: ClusterIP
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- ports:
- - name: {{ .Values.service.portName }}-http
- port: {{ .Values.service.externalHttpPort }}
- targetPort: {{ .Values.service.internalHttpPort }}
- protocol: TCP
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Copyright © 2020 Samsung Electronics
-# Copyright © 2021 Orange
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Default values for vid.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global:
- nodePortPrefix: 302
- mariadbGalera: &mariadbGalera
- #This flag allows VID to instantiate its own mariadb-galera cluster
- localCluster: false
- service: mariadb-galera
- internalPort: 3306
- nameOverride: mariadb-galera
- centralizedLoggingEnabled: true
-
-#################################################################
-# Secrets metaconfig
-#################################################################
-secrets:
- - uid: vid-db-user-secret
- name: &dbUserSecretName '{{ include "common.release" . }}-vid-db-user-secret'
- type: basicAuth
- externalSecret: '{{ tpl (default "" .Values.config.db.userCredentialsExternalSecret) . }}'
- login: '{{ .Values.config.db.userName }}'
- password: '{{ .Values.config.db.userPassword }}'
-
-#################################################################
-# AAF part
-#################################################################
-certInitializer:
- nameOverride: vid-cert-initializer
- aafDeployFqi: deployer@people.osaaf.org
- aafDeployPass: demo123456!
- # aafDeployCredsExternalSecret: some secret
- fqdn: vid
- fqi: vid@vid.onap.org
- public_fqdn: vid.onap.org
- fqi_namespace: "org.onap.vid"
- cadi_longitude: "0.0"
- cadi_latitude: "0.0"
- app_ns: org.osaaf.aaf
- credsPath: /opt/app/osaaf/local
- aaf_add_config: |
- echo "*** retrieving password for keystore and trustore"
- export $(/opt/app/aaf_config/bin/agent.sh local showpass \
- {{.Values.fqi}} {{ .Values.fqdn }} | grep '^c' | xargs -0)
- if [ -z "$cadi_keystore_password" ]
- then
- echo " /!\ certificates retrieval failed"
- exit 1
- else
- echo "*** changing them into shell safe ones"
- export KEYSTORE_PASSWD=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w64 | head -n1)
- export TRUSTORE_PASSWD=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w64 | head -n1)
- cd {{ .Values.credsPath }}
- keytool -storepasswd -new "${KEYSTORE_PASSWD}" \
- -storepass "${cadi_keystore_password_jks}" \
- -keystore {{ .Values.fqi_namespace }}.jks
- keytool -storepasswd -new "${TRUSTORE_PASSWD}" \
- -storepass "${cadi_truststore_password}" \
- -keystore {{ .Values.fqi_namespace }}.trust.jks
- echo "*** set key password as same password as keystore password"
- keytool -keypasswd -new "${KEYSTORE_PASSWD}" \
- -keystore {{ .Values.fqi_namespace }}.jks \
- -keypass "${cadi_keystore_password_jks}" \
- -storepass "${KEYSTORE_PASSWD}" -alias {{ .Values.fqi }}
- echo "*** save the generated passwords"
- echo "VID_KEYSTORE_PASSWORD=${KEYSTORE_PASSWD}" > mycreds.prop
- echo "VID_TRUSTSTORE_PASSWORD=${TRUSTORE_PASSWD}" >> mycreds.prop
- echo "*** change ownership of certificates to targeted user"
- chown -R 1000 .
- fi
-
-subChartsOnly:
- enabled: true
-
-# application image
-image: onap/vid:8.0.2
-pullPolicy: Always
-
-# application configuration
-config:
- db:
- userName: vidadmin
-# userCredentialsExternalSecret: some secret
-# userPassword: password
- asdcclientrestauth: "Basic dmlkOktwOGJKNFNYc3pNMFdYbGhhazNlSGxjc2UyZ0F3ODR2YW9HR21KdlV5MlU="
- asdcclientrestport: "8443"
- vidaaiport: "8443"
- onapport: "30225"
- onapportrest: "8443"
- portalhost: "portal.api.simpledemo.onap.org"
- msoport: "8080"
- vidmsopass: OBF:1ih71i271vny1yf41ymf1ylz1yf21vn41hzj1icz
- msodme2serverurl: http://localhost:8081
- vidcontactuslink: https://todo_contact_us_link.com
- vidmysqlmaxconnections: "5"
- logstashServiceName: log-ls
- logstashPort: 5044
- roleaccesscentralized: remote
-
-mariadb-galera:
- db:
- # password:
- externalSecret: *dbUserSecretName
- name: &mysqlDbName vid_openecomp_epsdk
- nameOverride: &vid-galera vid-galera
- replicaCount: 3
- persistence:
- enabled: true
- mountSubPath: vid/maria/data
- externalConfig: |-
- [mysqld]
- lower_case_table_names = 1
- serviceAccount:
- nameOverride: *vid-galera
-
-mariadb-init:
- config:
- userCredentialsExternalSecret: *dbUserSecretName
- mysqlDatabase: *mysqlDbName
- nameOverride: vid-mariadb-init
- # A configMap of same name is created. It points to file that will be run after
- # The DB has been created.
- dbScriptConfigMap: '{{ include "common.release" . }}-vid-db-init'
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 120
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- type: NodePort
- name: vid
- portName: vid
- externalPort: 8443
- internalPort: 8443
- nodePort: "00"
- externalHttpPort: 8080
- internalHttpPort: 8080
-
-ingress:
- enabled: false
- service:
- - baseaddr: "vid-ui"
- name: "vid-http"
- port: 8443
- plain_port: 8080
- config:
- ssl: "redirect"
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 200m
- memory: 2Gi
- requests:
- cpu: 100m
- memory: 1Gi
- large:
- limits:
- cpu: 400m
- memory: 4Gi
- requests:
- cpu: 200m
- memory: 2Gi
- unlimited: {}
-
-# Log configuration
-log:
- path: /var/log/onap
Code Review / oom.git / commitdiff