Pre-requisites
--------------
-Your environment must have both the Kubernetes `kubectl` and Helm setup as a one time activity.
+Your environment must have both the Kubernetes `kubectl` and Helm setup as a
+one time activity.
Install Kubectl
~~~~~~~~~~~~~~~
-Enter the following to install kubectl (on Ubuntu, there are slight differences on other O/Ss), the Kubernetes command line interface used to manage a Kubernetes cluster::
+Enter the following to install kubectl (on Ubuntu, there are slight differences
+on other O/Ss), the Kubernetes command line interface used to manage a
+Kubernetes cluster::
> curl -LO https://storage.googleapis.com/kubernetes-release/release/v1.8.10/bin/linux/amd64/kubectl
> chmod +x ./kubectl
> sudo mv ./kubectl /usr/local/bin/kubectl
> mkdir ~/.kube
-Paste kubectl config from Rancher (see the :ref:`cloud-setup-guide-label` for alternative Kubernetes environment setups) into the `~/.kube/config` file.
+Paste kubectl config from Rancher (see the :ref:`cloud-setup-guide-label` for
+alternative Kubernetes environment setups) into the `~/.kube/config` file.
Verify that the Kubernetes config is correct::
Install Helm
~~~~~~~~~~~~
-Helm is used by OOM for package and configuration management. To install Helm, enter the following::
+Helm is used by OOM for package and configuration management. To install Helm,
+enter the following::
> wget http://storage.googleapis.com/kubernetes-helm/helm-v2.9.1-linux-amd64.tar.gz
> tar -zxvf helm-v2.9.1-linux-amd64.tar.gz
Install the Helm Repo
---------------------
-Once kubectl and Helm are setup, one needs to setup a local Helm server to server up the ONAP charts::
+Once kubectl and Helm are setup, one needs to setup a local Helm server to
+server up the ONAP charts::
> helm install osn/onap
> helm init
> helm serve &
-Note the port number that is listed and use it in the Helm repo add as follows::
+Note the port number that is listed and use it in the Helm repo add as
+follows::
> helm repo add local http://127.0.0.1:8879
In any case, setup of the Helm repository is a one time activity.
-Once the repo is setup, installation of ONAP can be done with a single command::
+Next, install Helm Plugins required to deploy the ONAP Casablanca release::
- > helm install local/onap --name development
+ > cp -R helm/plugins/ ~/.helm
+
+Once the repo is setup, installation of ONAP can be done with a single
+command::
+
+ > helm deploy development local/onap --namespace onap
This will install ONAP from a local repository in a 'development' Helm release.
As described below, to override the default configuration values provided by
OOM, an environment file can be provided on the command line as follows::
- > helm install local/onap --name development -f onap-development.yaml
+ > helm deploy development local/onap --namespace onap -f overrides.yaml
To get a summary of the status of all of the pods (containers) running in your
deployment::
To install a specific version of a single ONAP component (`so` in this example)
-with the given name enter::
+with the given release name enter::
- > helm install onap/so --version 2.0.1 -n so
+ > helm deploy so onap/so --version 3.0.1
To display details of a specific resource or group of resources type::
user's own environment (a laptop etc.) the portal application's port 8989 is
exposed through a `Kubernetes LoadBalancer`_ object.
-Typically, to be able to access the Kubernetes nodes publicly a public address is
-assigned. In Openstack this is a floating IP address.
+Typically, to be able to access the Kubernetes nodes publicly a public address
+is assigned. In Openstack this is a floating IP address.
When the `portal-app` chart is deployed a Kubernetes service is created that
instantiates a load balancer. The LB chooses the private interface of one of
of the page
.. note::
- Besides the ONAP Portal the Components can deliver additional user interfaces,
+ Besides the ONAP Portal the Components can deliver additional user interfaces,
please check the Component specific documentation.
-.. note::
+.. note::
| Alternatives Considered:
- a set of liveness probes which feed into the Kubernetes manager which
are described in the Heal section.
-Within ONAP, Consul is the monitoring system of choice and deployed by OOM in two parts:
+Within ONAP, Consul is the monitoring system of choice and deployed by OOM in
+two parts:
- a three-way, centralized Consul server cluster is deployed as a highly
available monitor of all of the ONAP components, and
> helm undeploy casablanca --dry-run
-will display the outcome of deleting the 'casablanca' release from the deployment.
+will display the outcome of deleting the 'casablanca' release from the
+deployment.
To completely delete a release and remove it from the internal store enter::
> helm undeploy casablanca --purge
will remove `so` as the configuration indicates it's no longer part of the
deployment. This might be useful if a one wanted to replace just `so` by
-installing a custom version.
+installing a custom version.
+++ /dev/null
-AAI.instance-group-types=org.openecomp.groups.NetworkCollection,org.openecomp.groups.VfcInstanceGroup
--- /dev/null
+{
+ "instanceGroupTypes": [
+ "org.openecomp.groups.NetworkCollection",
+ "org.openecomp.groups.VfcInstanceGroup",
+ "org.openecomp.groups.ResourceInstanceGroup"
+ ],
+ "toscaToWidgetMappings": {
+ "org.openecomp.resource.vf.allottedResource": "AllotedResource",
+ "org.openecomp.resource.vfc.AllottedResource": "ProvidingService",
+ "org.openecomp.resource.vfc": "VServerWidget",
+ "org.openecomp.resource.cp": "LIntfWidget",
+ "org.openecomp.cp": "LIntfWidget",
+ "org.openecomp.resource.vl": "L3Network",
+ "org.openecomp.resource.vf": "VirtualFunction",
+ "org.openecomp.groups.vfmodule": "VfModule",
+ "org.openecomp.groups.VfModule": "VfModule",
+ "org.openecomp.resource.vfc.nodes.heat.cinder": "VolumeWidget",
+ "org.openecomp.nodes.PortMirroringConfiguration": "Configuration",
+ "org.openecomp.resource.cr.Kk1806Cr1": "CR"
+ }
+}
- mountPath: /opt/app/babel/config/artifact-generator.properties
name: {{ include "common.fullname" . }}-config
subPath: artifact-generator.properties
- - mountPath: /opt/app/babel/config/filter-types.properties
+ - mountPath: /opt/app/babel/config/tosca-mappings.json
name: {{ include "common.fullname" . }}-config
- subPath: filter-types.properties
+ subPath: tosca-mappings.json
- mountPath: /opt/app/babel/config/babel-auth.properties
name: {{ include "common.fullname" . }}-config
subPath: babel-auth.properties
items:
- key: artifact-generator.properties
path: artifact-generator.properties
- - key: filter-types.properties
- path: filter-types.properties
+ - key: tosca-mappings.json
+ path: tosca-mappings.json
- key: babel-auth.properties
path: babel-auth.properties
- key: logback.xml
storage: {{ .Values.persistence.size | quote }}
selector:
matchLabels:
+ app: {{ include "common.name" . }}
release: "{{ .Release.Name }}"
{{- end }}
--- /dev/null
+#!/bin/bash
+
+###
+# ============LICENSE_START=======================================================
+# APPC
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+###
+
+ODL_HOME=${ODL_HOME:-/opt/opendaylight/current}
+APPC_HOME=${APPC_HOME:-/opt/onap/appc}
+ENABLE_ODL_CLUSTER=${ENABLE_ODL_CLUSTER:-false}
+APPC_FEATURE_DIR=${APPC_FEATURE_DIR:-${APPC_HOME}/features}
+
+function featureInstall {
+COUNT=0
+while [ $COUNT -lt 10 ]; do
+ ${ODL_HOME}/bin/client feature:install $1 2> /tmp/installErr
+ cat /tmp/installErr
+ if grep -q 'Failed to get the session' /tmp/installErr; then
+ sleep 10
+ else
+ let COUNT=10
+ fi
+ let COUNT=COUNT+1
+done
+}
+
+ APPC_FEATURES=" \
+ appc-metric \
+ appc-dmaap-adapter \
+ appc-chef-adapter \
+ appc-netconf-adapter \
+ appc-rest-adapter \
+ appc-lifecycle-management \
+ appc-dispatcher \
+ appc-provider \
+ appc-dg-util \
+ appc-dg-shared \
+ appc-sdc-listener \
+ appc-oam \
+ appc-iaas-adapter \
+ appc-ansible-adapter \
+ appc-sequence-generator \
+ appc-artifact-handler \
+ appc-aai-client"
+
+APPC_FEATURES_1=" \
+ onap-appc-core \
+ onap-appc-metric \
+ onap-appc-dmaap-adapter \
+ onap-appc-chef-adapter \
+ onap-appc-netconf-adapter \
+ onap-appc-rest-adapter \
+ onap-appc-lifecycle-management \
+ onap-appc-license-manager"
+
+ APPC_FEATURES_2=" \
+ onap-appc-dg-util \
+ onap-appc-dg-shared \
+ onap-appc-sdc-listener \
+ onap-appc-oam \
+ onap-appc-iaas-adapter \
+ onap-appc-ansible-adapter \
+ onap-appc-sequence-generator \
+ onap-appc-config-generator \
+ onap-appc-config-data-services \
+ onap-appc-config-adaptor \
+ onap-appc-config-audit \
+ onap-appc-config-encryption-tool \
+ onap-appc-config-flow-controller \
+ onap-appc-config-params \
+ onap-appc-artifact-handler
+ onap-appc-aai-client \
+ onap-appc-event-listener \
+ onap-appc-network-inventory-client \
+ onap-appc-design-services \
+ onap-appc-interfaces-service"
+
+ APPC_FEATURES_UNZIP=" \
+ appc-core \
+ appc-metric \
+ appc-dmaap-adapter \
+ appc-event-listener \
+ appc-chef-adapter \
+ appc-netconf-adapter \
+ appc-rest-adapter \
+ appc-lifecycle-management \
+ appc-dispatcher \
+ appc-provider \
+ appc-dg-util \
+ appc-dg-shared \
+ appc-sdc-listener \
+ appc-oam \
+ appc-iaas-adapter \
+ appc-ansible-adapter \
+ appc-sequence-generator \
+ appc-config-generator \
+ appc-config-data-services \
+ appc-config-adaptor \
+ appc-config-audit \
+ appc-config-encryption-tool \
+ appc-config-flow-controller \
+ appc-config-params \
+ appc-artifact-handler \
+ appc-aai-client \
+ appc-network-inventory-client \
+ appc-design-services \
+ appc-interfaces-service"
+
+
+if $ENABLE_ODL_CLUSTER
+ then
+ echo "Enabling core APP-C features with clustering enabled"
+ featureInstall odl-netconf-connector-all
+ featureInstall odl-restconf-noauth
+ featureInstall odl-netconf-clustered-topology
+ else
+ echo "Enabling core APP-C features with clustering disabled"
+ featureInstall odl-netconf-connector-all
+ featureInstall odl-restconf-noauth
+ featureInstall odl-netconf-topology
+fi
+
+sleep 7s
+echo "Installing APP-C Features"
+echo ""
+
+for feature in ${APPC_FEATURES_UNZIP}
+do
+ if [ -f ${APPC_FEATURE_DIR}/${feature}/install-feature.sh ]
+ then
+ ${APPC_FEATURE_DIR}/${feature}/install-feature.sh
+ else
+ echo "No installer found for feature ${feature}"
+ fi
+done
+
+#${ODL_HOME}/bin/client feature:install appc-metric appc-dmaap-adapter appc-event-listener appc-chef-adapter appc-netconf-adapter appc-rest-adapter appc-lifecycle-management appc-dispatcher appc-provider appc-dg-util appc-dg-shared appc-sdc-listener appc-oam appc-iaas-adapter appc-ansible-adapter appc-sequence-generator appc-config-generator appc-config-data-services appc-config-adaptor appc-config-audit appc-config-encryption-tool appc-config-flow-controller appc-config-params appc-artifact-handler appc-aai-client
+
+for feature in ${APPC_FEATURES_1}
+do
+ echo "Installing ${feature}"
+ start=$(date +%s)
+ ${ODL_HOME}/bin/client "feature:install -r ${feature}"
+ end=$(date +%s)
+ echo "Install of ${feature} took $(expr $end - $start) seconds"
+ sleep 7s
+ echo "Sleep Finished"
+done
+
+ echo "Installing dispatcher features"
+ start=$(date +%s)
+ ${ODL_HOME}/bin/client "feature:install -r onap-appc-request-handler onap-appc-command-executor onap-appc-lifecycle-management onap-appc-workflow-management lock-manager onap-appc-provider"
+ end=$(date +%s)
+ echo "Install of dispatcher features took $(expr $end - $start) seconds"
+ sleep 7s
+ echo "Sleep Finished"
+
+for feature in ${APPC_FEATURES_2}
+do
+ echo "Installing ${feature}"
+ start=$(date +%s)
+ ${ODL_HOME}/bin/client "feature:install -r ${feature}"
+ end=$(date +%s)
+ echo "Install of ${feature} took $(expr $end - $start) seconds"
+ sleep 7s
+ echo "Sleep Finished"
+done
+
- mountPath: /opt/onap/appc/bin/installAppcDb.sh
name: onap-appc-bin
subPath: installAppcDb.sh
+ - mountPath: /opt/onap/appc/bin/installFeatures.sh
+ name: onap-appc-bin
+ subPath: installFeatures.sh
- mountPath: /opt/onap/appc/bin/health_check.sh
name: onap-appc-bin
subPath: health_check.sh
storage: {{ .Values.persistence.size | quote }}
selector:
matchLabels:
+ app: {{ include "common.name" . }}
release: "{{ .Release.Name }}"
{{- end }}
- msb-discovery\r
- --container-name\r
- kube2msb\r
+ - --container-name\r
+ - dcae-config-binding-service\r
- "-t"\r
- "15"\r
env:\r
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.5
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.7
# DCAE component images to be deployed via Cloudify Manager
# Use to override default setting in blueprints
componentImages:
- config_binding_service: onap/org.onap.dcaegen2.platform.configbinding.app-app:2.2.3
datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.1.1
deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:3.1.0
holmes_rules: onap/holmes/rule-management:1.2.3
holmes_engine: onap/holmes/engine-management:1.2.2
- inventory: onap/org.onap.dcaegen2.platform.inventory-api:3.0.4
policy_handler: onap/org.onap.dcaegen2.platform.policy-handler:4.5.0
- service_change_handler: onap/org.onap.dcaegen2.platform.servicechange-handler:1.1.5
tca: onap/org.onap.dcaegen2.deployments.tca-cdap-container:1.1.0
ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.3.1
snmptrap: onap/org.onap.dcaegen2.collectors.snmptrap:1.4.0
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP DCAE Config Binding Service
+name: dcae-config-binding-service
+version: 3.0.0
\ No newline at end of file
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~3.0.0
+ repository: '@local'
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+ #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+ paths:
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
+ #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+ ignore_older: 48h
+ # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+ clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+ #List of logstash server ip addresses with port number.
+ #But, in our case, this will be the loadbalancer IP address.
+ #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
+ #If enable will do load balancing among availabe Logstash, automatically.
+ loadbalance: true
+
+ #The list of root certificates for server verifications.
+ #If certificate_authorities is empty or not set, the trusted
+ #certificate authorities of the host system are used.
+ #ssl.certificate_authorities: $ssl.certificate_authorities
+
+ #The path to the certificate for SSL client authentication. If the certificate is not specified,
+ #client authentication is not available.
+ #ssl.certificate: $ssl.certificate
+
+ #The client certificate key used for client authentication.
+ #ssl.key: $ssl.key
+
+ #The passphrase used to decrypt an encrypted key stored in the configured key file
+ #ssl.key_passphrase: $ssl.key_passphrase
+
+logging:
+ level: debug
+
+ # enable file rotation with default configuration
+ to_files: true
+
+ # do not log to syslog
+ to_syslog: false
+
+ files:
+ path: /usr/share/filebeat/logs
+ name: mybeat.log
+ keepfiles: 7
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ .Release.Name }}-cbs-filebeat-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: 1
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ image: {{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - consul-server
+ - "-t"
+ - "15"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ httpGet:
+ path: {{ .Values.readiness.path }}
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /opt/logs
+ env:
+ - name: CONSUL_HOST
+ value: consul.{{ include "common.namespace" . }}
+
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ volumes:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-cbs-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+ repositoryCred:
+ user: docker
+ password: docker
+
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
+ # Addresses of other ONAP entities
+ address:
+ consul:
+ host: consul-server
+ port: 8500
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.platform.configbinding.app-app:2.2.3
+pullPolicy: Always
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ # liveness not desirable for Cloudify Manager container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ path: /healthcheck
+
+service:
+ type: ClusterIP
+ name: config-binding-service
+ externalPort: 10000
+ internalPort: 10000
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 2Gi
+ unlimited: {}
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+# dcae_ns: "dcae"
periodSeconds: 10
# application image
repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.1
+image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.3
# Resource Limit flavor -By Default using small
flavor: small
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP DCAE Service Change Handler
+name: dcae-servicechange-handler
+version: 3.0.0
\ No newline at end of file
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP DCAE Inventory API Service
+name: dcae-inventory-api
+version: 3.0.0
\ No newline at end of file
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~3.0.0
+ repository: '@local'
+ - name: postgres
+ version: ~3.0.0
+ repository: '@local'
--- /dev/null
+{
+ "database": {
+ "driverClass": "org.postgresql.Driver",
+ "user": "{{ .Values.postgres.config.pgUserName }}",
+ "password": "{{ .Values.postgres.config.pgUserPassword }}",
+ "url": "jdbc:postgresql://{{ .Values.postgres.service.name2 }}:5432/{{ .Values.postgres.config.pgDatabase }}",
+ "properties": {
+ "charSet": "UTF-8"
+ },
+ "maxWaitForConnection": "1s",
+ "validationQuery": "/* MyService Health Check */ SELECT 1",
+ "minSize": 2,
+ "maxSize": 8,
+ "initialSize": 2,
+ "checkConnectionWhileIdle": false,
+ "evictionInterval": "10s",
+ "minIdleTime": "1 minute"
+ },
+ "databusControllerConnection": {
+ "host": "databus-controller-hostname",
+ "port": 8443,
+ "mechId": null,
+ "password": null,
+ "required": false
+ },
+ "httpClient": {
+ "minThreads": 1,
+ "maxThreads": 128,
+ "gzipEnabled": false,
+ "gzipEnabledForRequests": false,
+ "timeout": "5000milliseconds",
+ "connectionTimeout": "5000milliseconds"
+ }
+ }
\ No newline at end of file
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: 1
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ image: {{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ .Values.postgres.nameOverride }}
+ - "-t"
+ - "15"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}:{{ .Values.image_version }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["java"]
+ args:
+ - "-jar"
+ - "/opt/inventory-api-{{ .Values.image_version }}.jar"
+ - "server"
+ - "/opt/config.json"
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: {{ .Values.readiness.path }}
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-inv-config
+ mountPath: /opt/config.json
+ subPath: config.json
+ env:
+ - name: CONSUL_HOST
+ value: consul.{{ include "common.namespace" . }}
+ volumes:
+ - name: {{ include "common.fullname" . }}-inv-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+ repositoryCred:
+ user: docker
+ password: docker
+
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
+ # Addresses of other ONAP entities
+ address:
+ consul:
+ host: consul-server
+ port: 8500
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.platform.inventory-api
+# need the version to be separate because it's used in 2 places
+image_version: 3.0.1
+
+pullPolicy: Always
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ # liveness not desirable for Cloudify Manager container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 30
+ path: /dcae-service-types
+
+service:
+ type: ClusterIP
+ name: inventory
+ externalPort: 8080
+ internalPort: 8080
+
+# application configuration override for postgres
+postgres:
+ nameOverride: dcae-inv-pg
+ service:
+ name: dcae-inv-postgres
+ name2: dcae-inv-pg-primary
+ name3: dcae-inv-pg-replica
+ container:
+ name:
+ primary: dcae-inv-pg-primary
+ replica: dcae-inv-pg-replica
+ config:
+ pgUserName: dcae_inv
+ pgDatabase: dcae_inventory
+ pgPrimaryPassword: onapdemodb
+ pgUserPassword: onapdemodb
+ pgRootPassword: onapdemodb
+ persistence:
+ mountSubPath: dcae-inv/data
+ mountInitPath: dcae-inv
+ pgpool:
+ nameOverride: dcae-inv-pgpool
+ service:
+ name: dcae-inv-pgpool
+ credentials:
+ pgusername: ddcae_inv
+ pgpassword: onapdemodb
+ container:
+ name:
+ primary: dcae-inv-pgpool-primary
+ replica: dcae-inv-pgpool-replica
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 2Gi
+ unlimited: {}
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+# dcae_ns: "dcae"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~3.0.0
+ repository: '@local'
--- /dev/null
+{
+ "asdcDistributionClient": {
+ "asdcAddress": "{{ .Values.config.address.sdc }}.{{include "common.namespace" . }}:8443",
+ "asdcUri": "https://{{ .Values.config.address.sdc }}.{{include "common.namespace" . }}:8443",
+ "msgBusAddress": "{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}",
+ "user": "{{ .Values.sdc.user }}",
+ "password": "{{ .Values.sdc.password }}",
+ "pollingInterval": 20,
+ "pollingTimeout": 20,
+ "consumerGroup": "dcae",
+ "consumerId": "dcae-sch",
+ "environmentName": "{{ .Values.sdc.environmentName }}",
+ "keyStorePath": null,
+ "keyStorePassword": null,
+ "activateServerTLSAuth": {{ .Values.sdc.useHttps }},
+ "useHttpsWithDmaap": {{ .Values.dmaap.useHttps }},
+ "isFilterInEmptyResources": false
+ },
+ "dcaeInventoryClient": {
+ "uri": "http://inventory:8080"
+ }
+}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: 1
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ image: {{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "dcae-inventory-api"
+ - --container-name
+ - "message-router"
+ - --container-name
+ - "sdc-dcae-be"
+ - "-t"
+ - "45"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}:{{ .Values.image_version }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["java"]
+ args:
+ - "-jar"
+ - "/opt/servicechange-handler.jar"
+ - "prod"
+ - "/opt/config.json"
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ exec:
+ command: [{{ .Values.liveness.script }}]
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ exec:
+ command: [{{ .Values.readiness.script }}]
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-sch-config
+ mountPath: /opt/config.json
+ subPath: config.json
+ env:
+ - name: CONSUL_HOST
+ value: consul.{{ include "common.namespace" . }}
+ volumes:
+ - name: {{ include "common.fullname" . }}-sch-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+ repositoryCred:
+ user: docker
+ password: docker
+
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
+ address:
+ # Addresses of ONAP components
+ message_router: message-router
+ sdc: sdc-be
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.platform.servicechange-handler
+# need the version to be separate because it's used in 2 places
+image_version: 1.1.5
+
+pullPolicy: Always
+
+# configuration for accessing SDC
+sdc:
+ user: "dcae"
+ password: !!str Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
+ environmentName: "AUTO"
+ useHttps: false
+
+# configuration for accessing DMaaP
+dmaap:
+ useHttps: false
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 30
+ periodSeconds: 30
+ script: /opt/health.sh
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ # liveness not desirable for Cloudify Manager container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 30
+ script: /opt/health.sh
+
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 2Gi
+ unlimited: {}
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+# dcae_ns: "dcae"
csit: No
# name of this DMaaP instance (deprecated)
-DmaapName: demo
+#DmaapName: demo
#####################################################
#
#
#####################################################
# FQDN of DR Prov Server (deprecated)
-DR.provhost: dcae-drps.domain.not.set
+#DR.provhost: dcae-drps.domain.not.set
# URI to retrieve dynamic DR configuration
ProvisioningURI: /internal/prov
MR.TopicMgrRole: org.onap.dmaap-bc-topic-mgr.client
# MR topic ProjectID (used in certain topic name generation formats)
-MR.projectID: ONAP
+MR.projectID: mr
#####################################################
# Admin Password
aaf.AdminPassword: {{ .Values.adminPwd }}
+# Identity that is owner of any created namespaces for topics
+aaf.NsOwnerIdentity: {{ .Values.adminUser }}
+
# location of the codec keyfile used to decrypt passwords in this properties file before they are passed to AAF
CredentialCodeKeyfile: etc/LocalKey
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
+ hostAliases:
+ - ip: "10.12.6.214"
+ hostnames:
+ - "aaf-onap-test.osaaf.org"
initContainers:
- command:
- /root/ready.py
# application images
repository: nexus3.onap.org:10001
-image: onap/dmaap/buscontroller:1.0.23
+image: onap/dmaap/buscontroller:1.0.25
# application configuration
dmaapMessageRouterService: message-router
-aafURL: https://aaf-authz/
+aafURL: https://aaf-onap-test.osaaf.org:8095/proxy/
topicMgrUser: dmaap-bc-topic-mgr@dmaap-bc-topic-mgr.onap.org
topicMgrPwd: demo123456!
adminUser: aaf_admin@people.osaaf.org
transport.consume.timeout=15000
transport.consume.batchsize=8
transport.consume.type=HTTPAUTH
+transport.message-router.apiKey=apiKeyTemp123
+transport.message-router.apiSecret=apiSecretTemp123
+transport.message-router.requiredPombaTopics=POA-AUDIT-INIT,POA-AUDIT-RESULT,POA-RULE-VALIDATION
transport.publish.host=message-router
transport.publish.port=3904
-# Copyright © 2018 Amdocs
+# Copyright © 2018 Amdocs
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
--- /dev/null
+pluginsList:
+ - pluginId: DCAED
+ pluginDiscoveryUrl: "{{ .Values.config.plugins.dcae_discovery_url }}"
+ pluginSourceUrl: "{{ .Values.config.plugins.dcae_source_url }}"
+ pluginStateUrl: "dcaed"
+ pluginDisplayOptions:
+ context:
+ displayName: "Monitoring"
+ displayContext: ["SERVICE"]
+ displayRoles: ["DESIGNER"]
+ - pluginId: DCAE-DS
+ pluginDiscoveryUrl: "{{ .Values.config.plugins.dcae_dt_discovery_url }}"
+ pluginSourceUrl: "{{ .Values.config.plugins.dcae_dt_source_url }}"
+ pluginStateUrl: "dcae-ds"
+ pluginDisplayOptions:
+ tab:
+ displayName: "DCAE-DS"
+ displayRoles: ["DESIGNER"]
+ - pluginId: WORKFLOW
+ pluginDiscoveryUrl: "{{ .Values.config.plugins.workflow_discovery_url }}"
+ pluginSourceUrl: "{{ .Values.config.plugins.workflow_source_url }}"
+ pluginStateUrl: "workflowDesigner"
+ pluginDisplayOptions:
+ tab:
+ displayName: "WORKFLOW"
+ displayRoles: ["DESIGNER", "TESTER"]
+
+connectionTimeout: 1000
\ No newline at end of file
heritage: {{ .Release.Service }}
data:
{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-plugins-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/plugins/*").AsConfig . | indent 2 }}
\ No newline at end of file
readOnly: true
- name: {{ include "common.fullname" . }}-logs
mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-configs
+ mountPath: /var/lib/jetty/config/catalog-fe/plugins-configuration.yaml
+ subPath: plugins-configuration.yaml
- name: {{ include "common.fullname" . }}-logback
mountPath: /tmp/logback.xml
subPath: logback.xml
name: {{ .Release.Name }}-sdc-filebeat-configmap
- name: {{ include "common.fullname" . }}-data-filebeat
emptyDir: {}
+ - name: {{ include "common.fullname" . }}-configs
+ configMap:
+ name : {{ include "common.fullname" . }}-plugins-configmap
+ defaultMode: 0777
- name: {{ include "common.fullname" . }}-logback
configMap:
name : {{ include "common.fullname" . }}-logging-configmap
config:
javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6000,server=y,suspend=n -Xmx256m -Xms256m"
+ plugins:
+ dcae_discovery_url: "http://sdc-dcae-fe:8183/dcaed/#/home"
+ dcae_source_url: "http://sdc.dcae.plugin.simpledemo.onap.org:30263/dcaed/#/home"
+ dcae_dt_discovery_url: "http://sdc-dcae-dt:8186/dcae/#/dcae/home"
+ dcae_dt_source_url: "http://sdc.dcae.plugin.simpledemo.onap.org:30265/dcae/#/dcae/home"
+ workflow_discovery_url: "http://sdc-wfd-fe:8080"
+ workflow_source_url: "http://sdc.workflow.plugin.simpledemo.onap.org:30256"
# default number of instances
replicaCount: 1
],
"KB": "sdc-kb.{{include "common.namespace" .}}"
},
- "Plugins": {
- "DCAE": {
- "dcae_discovery_url": "http://sdc-dcae-fe.{{include "common.namespace" .}}:8183/dcaed/#/home",
- "dcae_source_url": "http://sdc.dcae.plugin.simpledemo.onap.org:30263/dcaed/#/home"
- },
- "DCAE-TAB": {
- "dcae_dt_discovery_url": "http://sdc-dcae-dt.{{include "common.namespace" .}}:8186/dcae/#/dcae/home",
- "dcae_dt_source_url": "http://sdc.dcae.plugin.simpledemo.onap.org:30265/dcae/#/dcae/home"
- },
- "WORKFLOW": {
- "workflow_discovery_url": "http://sdc-wfd-fe.{{include "common.namespace" .}}:8080",
- "workflow_source_url": "http://sdc.workflow.plugin.simpledemo.onap.org:30256"
- }
- },
"VnfRepo": {
"vnfRepoPort": "{{.Values.config.environment.vnfRepoPort}}",
"vnfRepoHost": "refrepo.{{include "common.namespace" .}}"
callback: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/mso/vnfAdapterNotify
rollback:
callback: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/mso/vnfAdapterNotify
+ use:
+ qualified:
+ host: false
global:
dmaap:
username: testuser
host: http://10.42.111.36:904
publisher:
topic: replaceme
+ naming:
+ endpoint: http://naming.demo.onap.com:8081/web/service/v1/genNetworkElementName
+ auth: Basic bTA0NzY4QG5vbi1wcm9kLm1zby5lY29tcC5hdHQuY29tOkF0dG0wNDc2OExpZmUhQA==
policy:
auth: Basic dGVzdHBkcDphbHBoYTEyMw==
+ default:
+ disposition: Skip
client:
auth: Basic bTAzNzQzOnBvbGljeVIwY2sk
endpoint: http://pdp.{{ include "common.namespace" . }}:8081/pdp/api/
spring:
datasource:
driver-class-name: org.mariadb.jdbc.Driver
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/camundabpmn
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/camundabpmn
username: ${DB_USERNAME}
password: ${DB_PASSWORD}
dbcp2:
port: {{ index .Values.containerPort }}
spring:
datasource:
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/catalogdb
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/catalogdb
username: ${DB_ADMIN_USERNAME}
password: ${DB_ADMIN_PASSWORD}
driver-class-name: org.mariadb.jdbc.Driver
endpoint: http://so-request-db-adapter.{{ include "common.namespace" . }}:8083
spring:
datasource:
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
username: ${DB_USERNAME}
password: ${DB_PASSWORD}
driver-class-name: org.mariadb.jdbc.Driver
context-path: /manage
flyway:
baseline-on-migrate: true
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
user: ${DB_ADMIN_USERNAME}
password: ${DB_ADMIN_PASSWORD}
port: {{ index .Values.containerPort }}
spring:
datasource:
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/catalogdb
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/catalogdb
username: ${DB_USERNAME}
password: ${DB_PASSWORD}
driver-class-name: org.mariadb.jdbc.Driver
role: ACTUATOR
request:
datasource:
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
username: ${DB_USERNAME}
password: ${DB_PASSWORD}
driver-class-name: org.mariadb.jdbc.Driver
pollingInterval: 60
pollingTimeout: 60
relevantArtifactTypes: HEAT,HEAT_ENV,HEAT_VOL
+ useHttpsWithDmaap: false
activateServerTLSAuth: false
keyStorePassword:
keyStorePath:
activate: POST|285000|sdncurl8|sdnc-request-header|com:att:sdnctl:nbncapi
assign: POST|285000|sdncurl8|sdnc-request-header|com:att:sdnctl:nbncapi
delete: POST|285000|sdncurl8|sdnc-request-header|com:att:sdnctl:nbncapi
+ vnf-topology-aic-operation:
+ activate: POST|270000|sdncurl11|sdnc-request-header|com:att:sdnctl:vnftopologyaic
+ assign: POST|270000|sdncurl11|sdnc-request-header|com:att:sdnctl:vnftopologyaic
tunnelxconn-topology-operation:
activate: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
assign: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
rollback: POST|270000|sdncurl6|sdnc-request-header|org:onap:sdnctl:vnf
bpelauth: 023A0244AB819A0DE0131DBC3AC5FAB4D8544E1CB1A7FE3CE60F6E3292AC0D93
bpelurl: http://so-bpmn-infra.{{ include "common.namespace" . }}:8081/mso/SDNCAdapterCallbackService
+ gammainternet:
+ '':
+ query: GET|60000|sdncurl4|sdnc-request-header|com:att:sdnctl:firewallapi
+ service-configuration-operation:
+ activate: POST|90000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ changeactivate: POST|60000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ changedelete: POST|250000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ changereserve: POST|60000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ delete: POST|250000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ reserve: POST|60000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ turnup: POST|60000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ svc-topology-operation:
+ assign: POST|60000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
+ delete: POST|250000|sdncurl1|sdnc-request-header|com:att:sdnctl:l3api
generic-resource:
network-topology-operation:
create: POST|270000|sdncurl10|sdnc-request-header|org:onap:sdnc:northbound:generic-resource
sdncurl12: 'http://sdnc.{{ include "common.namespace" . }}:8282/'
sdncurl5: 'http://sdnc.{{ include "common.namespace" . }}:8282/restconf/config'
sdncurl6: 'http://sdnc.{{ include "common.namespace" . }}:8282/restconf/operations/VNF-API:'
+ sdncurl7: 'http://sdnc.{{ include "common.namespace" . }}:8282/restconf/operations/L3UCPE-API:'
sdncurl8: 'http://sdnc.{{ include "common.namespace" . }}:8282/restconf/operations/NBNC-API:'
sdncurl9: 'http://sdnc.{{ include "common.namespace" . }}:8282/restconf/operations/NORTHBOUND-API:service-topology-operation'
service:
topic: com.att.ecomp.mso.operationalEnvironmentEvent
spring:
datasource:
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/catalogdb
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/catalogdb
username: ${DB_USERNAME}
password: ${DB_PASSWORD}
driver-class-name: org.mariadb.jdbc.Driver
role: ACTUATOR
request:
datasource:
- url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
+ jdbc-url: jdbc:mariadb://${DB_HOST}:${DB_PORT}/requestdb
username: ${DB_USERNAME}
password: ${DB_PASSWORD}
driver-class-name: org.mariadb.jdbc.Driver
Code Review / oom.git / commitdiff