chart-version: { get_input: chart-version }
namespace: { get_input: namespace }
stable-repo-url: { get_input: stable-repo-url}
- config: '{ "aaf": {"enabled": false}, "aai": {"enabled": false}, "appc": {"enabled": false}, "clamp": {"enabled": false}, "cli": {"enabled": false}, "consul": {"enabled": false}, "dcaegen2": {"enabled": false}, "dmaap": {"enabled": false}, "esr": {"enabled": false}, "log": {"enabled": false}, "sniro-emulator": {"enabled": false}, "msb": {"enabled": false}, "multicloud": {"enabled": false}, "nbi": {"enabled": false}, "oof": {"enabled": false}, "policy": {"enabled": false}, "pomba": {"enabled": false}, "portal": {"enabled": false}, "robot": {"enabled": false}, "sdc": {"enabled": false}, "sdnc": {"enabled": false}, "so": {"enabled": false}, "uui": {"enabled": false}, "vfc": {"enabled": false}, "vid": {"enabled": false}, "vnfsdk": {"enabled": false} }'
+ config: '{ "aaf": {"enabled": false}, "aai": {"enabled": false}, "appc": {"enabled": false}, "clamp": {"enabled": false}, "cli": {"enabled": false}, "consul": {"enabled": false}, "dcaegen2": {"enabled": false}, "dmaap": {"enabled": false}, "log": {"enabled": false}, "sniro-emulator": {"enabled": false}, "msb": {"enabled": false}, "multicloud": {"enabled": false}, "nbi": {"enabled": false}, "oof": {"enabled": false}, "policy": {"enabled": false}, "pomba": {"enabled": false}, "portal": {"enabled": false}, "robot": {"enabled": false}, "sdc": {"enabled": false}, "sdnc": {"enabled": false}, "so": {"enabled": false}, "uui": {"enabled": false}, "vfc": {"enabled": false}, "vid": {"enabled": false}, "vnfsdk": {"enabled": false} }'
aaf:
type: onap.nodes.component
- type: cloudify.relationships.connected_to
target: onap_env
- esr:
- type: onap.nodes.component
- properties:
- tiller-server-ip: { get_input: tiller-server-ip }
- tiller-server-port: { get_input: tiller-server-port }
- component-name: esr
- chart-repo-url: { get_input: chart-repo-url }
- chart-version: { get_input: chart-version }
- namespace: { get_input: namespace }
- stable-repo-url: { get_input: stable-repo-url}
- relationships:
- - type: cloudify.relationships.connected_to
- target: onap_env
-
log:
type: onap.nodes.component
properties:
stable-repo-url: { get_input: stable-repo-url}
relationships:
- type: cloudify.relationships.connected_to
- target: onap_env
\ No newline at end of file
+ target: onap_env
enabled: false
dcaegen2:
enabled: false
-esr:
- enabled: false
log:
enabled: false
message-router:
local/dcaegen2 8.0.0 ONAP DCAE Gen2
local/dgbuilder 8.0.0 D.G. Builder application
local/dmaap 8.0.0 ONAP DMaaP components
-local/esr 8.0.0 ONAP External System Register
local/log 8.0.0 ONAP Logging ElasticStack
local/mariadb-galera 8.0.0 Chart for MariaDB Galera cluster
local/mongo 8.0.0 MongoDB Server
--- /dev/null
+.. This work is licensed under a Creative Commons Attribution 4.0
+ International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) ONAP Project and its contributors
+.. _release_notes_honolulu:
+
+:orphan:
+
+*************************************
+ONAP Operations Manager Release Notes
+*************************************
+
+Previous Release Notes
+======================
+
+- :ref:`Guilin <release_notes_guilin>`
+- :ref:`Frankfurt <release_notes_frankfurt>`
+- :ref:`El Alto <release_notes_elalto>`
+- :ref:`Dublin <release_notes_dublin>`
+- :ref:`Casablanca <release_notes_casablanca>`
+- :ref:`Beijing <release_notes_beijing>`
+- :ref:`Amsterdam <release_notes_amsterdam>`
+
+Abstract
+========
+
+This document provides the release notes for the Honolulu release.
+
+Summary
+=======
+
+The focus of this release is to strengthen the foundation of OOM installer.
+
+Release Data
+============
+
++--------------------------------------+--------------------------------------+
+| **Project** | OOM |
+| | |
++--------------------------------------+--------------------------------------+
+| **Docker images** | N/A |
+| | |
++--------------------------------------+--------------------------------------+
+| **Release designation** | Honolulu |
+| | |
++--------------------------------------+--------------------------------------+
+| **Release date** | 2021/04/29 |
+| | |
++--------------------------------------+--------------------------------------+
+
+New features
+------------
+
+* Kubernetes support for version up to 1.20
+* Helm support for version up to 3.5
+* Limits are set for most of the components
+* Portal-Cassandra image updated to Bitnami, supporting IPv4/IPv6 Dual Stack
+* CMPv2 external issuer implemented which extends Cert-Manager with ability to
+ enroll X.509 certificates from CMPv2 servers
+* New version for mariadb galera using Bitnami image, supporting IPv4/IPv6 Dual
+ Stack
+* Bump version of common PostgreSQL and ElasticSearch
+* Move to automatic certificates retrieval for 80% of the components
+* Consistent retrieval of docker images, with ability to configure proxy for
+ the 4 repositories used by ONAP
+
+**Bug fixes**
+
+A list of issues resolved in this release can be found here:
+https://jira.onap.org/projects/OOM/versions/11073
+
+major issues solved:
+
+* Better handling of persistence on PostgreSQL
+* Better Ingress templating
+* Better Service templating
+
+**Known Issues**
+
+- `OOM-2554 <https://jira.onap.org/browse/OOM-2554>`_ Common pods have java 8
+- `OOM-2435 <https://jira.onap.org/browse/OOM-2435>`_ SDNC karaf shell:
+ log:list: Error executing command: Unrecognized configuration
+- `OOM-2629 <https://jira.onap.org/browse/OOM-2629>`_ NetBox demo entry setup
+ not complete
+- `OOM-2706 <https://jira.onap.org/browse/OOM-2706>`_ CDS Blueprint Processor
+ does not work with local DB
+- `OOM-2713 <https://jira.onap.org/browse/OOM-2713>`_ Problem on onboarding
+ custom cert to SDNC ONAP during deployment
+- `OOM-2698 <https://jira.onap.org/browse/OOM-2698>`_ SO helm override fails in
+ for value with multi-level replacement
+- `OOM-2697 <https://jira.onap.org/browse/OOM-2697>`_ SO with local MariaDB
+ deployment fails
+- `OOM-2538 <https://jira.onap.org/browse/OOM-2538>`_ strange error with
+ CertInitializer template
+- `OOM-2547 <https://jira.onap.org/browse/OOM-2547>`_ Health Check failures
+ seen after bringing down/up control plane & worker node VM instances on which
+ ONAP hosted
+- `OOM-2699 <https://jira.onap.org/browse/OOM-2699>`_ SO so-mariadb
+ readinessCheck fails for local MariaDB instance
+- `OOM-2705 <https://jira.onap.org/browse/OOM-2705>`_ SDNC DB installation fails
+ on local MariaDB instance
+- `OOM-2603 <https://jira.onap.org/browse/OOM-2603>`_ [SDNC] allign password for
+ scaleoutUser/restconfUser/odlUser
+
+Deliverables
+------------
+
+Software Deliverables
+~~~~~~~~~~~~~~~~~~~~~
+
+OOM provides `Helm charts <https://git.onap.org/oom/>`_ that needs to be
+"compiled" into Helm package. see step 6 in
+:doc:`quickstart guide <oom_quickstart_guide>`.
+
+Documentation Deliverables
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- :doc:`Project Description <oom_project_description>`
+- :doc:`Cloud Setup Guide <oom_cloud_setup_guide>`
+- :doc:`Quick Start Guide <oom_quickstart_guide>`
+- :doc:`Setup Ingress Controller <oom_setup_ingress_controller>`
+- :doc:`Developer Guide <oom_developer_guide>`
+- :doc:`Hardcoded Certificates <oom_hardcoded_certificates>`
+
+Known Limitations, Issues and Workarounds
+=========================================
+
+Known Vulnerabilities
+---------------------
+
+- Hard coded password used for all OOM deployments
+ [`OJSI-188 <https://jira.onap.org/browse/OJSI-188>`_]
+- :doc:`Hard coded certificates <oom_hardcoded_certificates>` in Helm packages
+
+Workarounds
+-----------
+
+- `<https://github.com/bitnami/bitnami-docker-mariadb-galera/issues/35>`_
+ Workaround is to generate a password with "short" strenght or pregenerate
+ passwords without single quote in it. Default deployment is using "short"
+ password generation for mariadb.
+
+Security Notes
+--------------
+
+**Fixed Security Issues**
+
+References
+==========
+
+For more information on the ONAP Frankfurt release, please see:
+
+#. `ONAP Home Page`_
+#. `ONAP Documentation`_
+#. `ONAP Release Downloads`_
+#. `ONAP Wiki Page`_
+
+
+.. _`ONAP Home Page`: https://www.onap.org
+.. _`ONAP Wiki Page`: https://wiki.onap.org
+.. _`ONAP Documentation`: https://docs.onap.org
+.. _`ONAP Release Downloads`: https://git.onap.org
Previous Release Notes
======================
+- :ref:`Honolulu <release_notes_honolulu>`
- :ref:`Guilin <release_notes_guilin>`
- :ref:`Frankfurt <release_notes_frankfurt>`
- :ref:`El Alto <release_notes_elalto>`
Abstract
========
-This document provides the release notes for the Honolulu release.
+This document provides the release notes for the Istanbul release.
Summary
=======
-The focus of this release is to strengthen the foundation of OOM installer.
+
Release Data
============
| **Docker images** | N/A |
| | |
+--------------------------------------+--------------------------------------+
-| **Release designation** | Honolulu |
+| **Release designation** | Istanbul |
| | |
+--------------------------------------+--------------------------------------+
-| **Release date** | 2021/04/29 |
+| **Release date** | |
| | |
+--------------------------------------+--------------------------------------+
New features
------------
-* Kubernetes support for version up to 1.20
-* Helm support for version up to 3.5
-* Limits are set for most of the components
-* Portal-Cassandra image updated to Bitnami, supporting IPv4/IPv6 Dual Stack
-* CMPv2 external issuer implemented which extends Cert-Manager with ability to
- enroll X.509 certificates from CMPv2 servers
-* New version for mariadb galera using Bitnami image, supporting IPv4/IPv6 Dual
- Stack
-* Bump version of common PostgreSQL and ElasticSearch
-* Move to automatic certificates retrieval for 80% of the components
-* Consistent retrieval of docker images, with ability to configure proxy for
- the 4 repositories used by ONAP
**Bug fixes**
A list of issues resolved in this release can be found here:
-https://jira.onap.org/projects/OOM/versions/11073
-
-major issues solved:
+https://jira.onap.org/projects/OOM/versions/11074
-* Better handling of persistence on PostgreSQL
-* Better Ingress templating
-* Better Service templating
**Known Issues**
-- `OOM-2554 <https://jira.onap.org/browse/OOM-2554>`_ Common pods have java 8
-- `OOM-2435 <https://jira.onap.org/browse/OOM-2435>`_ SDNC karaf shell:
- log:list: Error executing command: Unrecognized configuration
-- `OOM-2629 <https://jira.onap.org/browse/OOM-2629>`_ NetBox demo entry setup
- not complete
-- `OOM-2706 <https://jira.onap.org/browse/OOM-2706>`_ CDS Blueprint Processor
- does not work with local DB
-- `OOM-2713 <https://jira.onap.org/browse/OOM-2713>`_ Problem on onboarding
- custom cert to SDNC ONAP during deployment
-- `OOM-2698 <https://jira.onap.org/browse/OOM-2698>`_ SO helm override fails in
- for value with multi-level replacement
-- `OOM-2697 <https://jira.onap.org/browse/OOM-2697>`_ SO with local MariaDB
- deployment fails
-- `OOM-2538 <https://jira.onap.org/browse/OOM-2538>`_ strange error with
- CertInitializer template
-- `OOM-2547 <https://jira.onap.org/browse/OOM-2547>`_ Health Check failures
- seen after bringing down/up control plane & worker node VM instances on which
- ONAP hosted
-- `OOM-2699 <https://jira.onap.org/browse/OOM-2699>`_ SO so-mariadb
- readinessCheck fails for local MariaDB instance
-- `OOM-2705 <https://jira.onap.org/browse/OOM-2705>`_ SDNC DB installation fails
- on local MariaDB instance
-- `OOM-2603 <https://jira.onap.org/browse/OOM-2603>`_ [SDNC] allign password for
- scaleoutUser/restconfUser/odlUser
Deliverables
------------
Known Vulnerabilities
---------------------
-- Hard coded password used for all OOM deployments
- [`OJSI-188 <https://jira.onap.org/browse/OJSI-188>`_]
-- :doc:`Hard coded certificates <oom_hardcoded_certificates>` in Helm packages
Workarounds
-----------
-- `<https://github.com/bitnami/bitnami-docker-mariadb-galera/issues/35>`_
- Workaround is to generate a password with "short" strenght or pregenerate
- passwords without single quote in it. Default deployment is using "short"
- password generation for mariadb.
+- `OOM-2754 <https://jira.onap.org/browse/OOM-2754>`_
+ Because of *updateEndpoint* property added to *cmpv2issuer* CRD
+ it is impossible to upgrade platform component from Honolulu to Istanbul
+ release without manual steps. Actions that should be performed:
+
+ #. Update the CRD definition::
+
+ > kubectl -n onap apply -f oom/kubernetes/platform/components/cmpv2-cert-provider/crds/cmpv2issuer.yaml
+ #. Upgrade the component::
+
+ > helm -n onap upgrade dev-platform oom/kubernetes/platform
+ #. Make sure that *cmpv2issuer* contains correct value for
+ *spec.updateEndpoint*. The value should be: *v1/certificate-update*.
+ If it's not, edit the resource::
+
+ > kubectl -n onap edit cmpv2issuer cmpv2-issuer-onap
+
Security Notes
--------------
References
==========
-For more information on the ONAP Frankfurt release, please see:
+For more information on the ONAP Istanbul release, please see:
#. `ONAP Home Page`_
#. `ONAP Documentation`_
--- /dev/null
+server.port=9516
+{{ if ( include "common.needTLS" .) }}
+server.ssl.key-store=${CONFIG_HOME}/auth/tomcat_keystore
+server.ssl.client-auth=need
+{{ else }}
+security.require-ssl=false
+server.ssl.enabled=false
+{{ end }}
+
+server.servlet.context-path=/services/babel-service
+
+logging.config=${CONFIG_HOME}/logback.xml
+
+tosca.mappings.config=${CONFIG_HOME}/tosca-mappings.json
{{- if eq .Values.service.type "NodePort" }}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
{{- else }}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
{{- end }}
selector:
service:
type: NodePort
- portName: babel
+ portName: http
externalPort: 9516
internalPort: 9516
nodePort: 79
# this could come from siteconfig.pl?
aai.config.nodename=AutomaticallyOverwritten
+{{ if ( include "common.needTLS" .) }}
aai.server.url.base=https://aai.{{ include "common.namespace" . }}:8443/aai/
aai.server.url=https://aai.{{ include "common.namespace" . }}:8443/aai/{{ .Values.global.config.schema.version.api.default }}/
aai.global.callback.url=https://aai.{{ include "common.namespace" . }}:8443/aai/
+{{ else }}
+aai.server.url.base=http://aai.{{ include "common.namespace" . }}/aai/
+aai.server.url=http://aai.{{ include "common.namespace" . }}/aai/{{ .Values.global.config.schema.version.api.default }}/
+aai.global.callback.url=http://aai.{{ include "common.namespace" . }}/aai/
+{{ end }}
-{{ if .Values.global.config.basic.auth.enabled }}
+{{ if or (.Values.global.config.basic.auth.enabled) ( include "common.onServiceMesh" .) }}
aai.tools.enableBasicAuth=true
aai.tools.username={{ .Values.global.config.basic.auth.username }}
aai.tools.password={{ .Values.global.config.basic.auth.passwd }}
{{ end }}
+{{ if ( include "common.needTLS" .) }}
aai.truststore.filename={{ .Values.global.config.truststore.filename }}
aai.truststore.passwd.x={{ .Values.global.config.truststore.passwd }}
aai.keystore.filename={{ .Values.global.config.keystore.filename }}
aai.keystore.passwd.x={{ .Values.global.config.keystore.passwd }}
+{{ end }}
aai.notification.current.version={{ .Values.global.config.schema.version.api.default }}
aai.notificationEvent.default.status=UNPROCESSED
spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
-spring.profiles.active={{ .Values.config.profiles.active }}
+spring.profiles.active={{ .Values.config.profiles.active }}{{ (eq "true" (include "common.needTLS" .)) | ternary ",one-way-ssl" "" }}
spring.jersey.application-path=${schema.uri.base.path}
#The max number of active threads in this pool
server.tomcat.max-threads=200
server.basic.auth.location=${server.local.startpath}etc/auth/realm.properties
server.port=8449
+{{ if ( include "common.needTLS" .) }}
server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
server.ssl.key-store=${server.local.startpath}/etc/auth/{{ .Values.global.config.keystore.filename }}
server.ssl.key-store-password=password({{ .Values.global.config.keystore.passwd }})
server.ssl.trust-store-password=password({{ .Values.global.config.truststore.passwd }})
server.ssl.client-auth=want
server.ssl.key-store-type=JKS
+{{ else }}
+security.require-ssl=false
+server.ssl.enabled=false
+{{ end }}
# JMS bind address host port
jms.bind.address=tcp://localhost:61649
-dmaap.ribbon.listOfServers=message-router.{{.Release.Namespace}}:3905
-dmaap.ribbon.transportType=https
+dmaap.ribbon.listOfServers=message-router.{{.Release.Namespace}}:{{ (eq "true" (include "common.needTLS" .)) | ternary 3905 3904 }}
+dmaap.ribbon.transportType={{ include "common.scheme" . }}
# Schema related attributes for the oxm and edges
# Any additional schema related attributes should start with prefix schema
schema.version.api.default={{ .Values.global.config.schema.version.api.default }}
schema.translator.list={{ .Values.global.config.schema.translator.list }}
-schema.service.base.url=https://aai-schema-service.{{ include "common.namespace" . }}:8452/aai/schema-service/v1/
+schema.service.base.url={{ include "common.scheme" . }}://aai-schema-service.{{ include "common.namespace" . }}:8452/aai/schema-service/v1/
schema.service.nodes.endpoint=nodes?version=
schema.service.edges.endpoint=edgerules?version=
schema.service.versions.endpoint=versions
-schema.service.client={{ .Values.global.config.schema.service.client }}
+schema.service.client={{ (eq "true" (include "common.needTLS" .)) | ternary .Values.global.config.schema.service.client "no-auth" }}
+{{ if ( include "common.needTLS" .) }}
schema.service.ssl.key-store=${server.local.startpath}/etc/auth/{{ .Values.global.config.keystore.filename }}
schema.service.ssl.trust-store=${server.local.startpath}/etc/auth/{{ .Values.global.config.truststore.filename }}
schema.service.ssl.key-store-password=password({{ .Values.global.config.keystore.passwd }})
schema.service.ssl.trust-store-password=password({{ .Values.global.config.truststore.passwd }})
+{{ end }}
aperture.rdbmsname=aai_relational
-aperture.service.client={{ .Values.global.config.schema.service.client }}
+aperture.service.client={{ (eq "true" (include "common.needTLS" .)) | ternary .Values.global.config.schema.service.client "no-auth" }}
+
aperture.service.base.url=http://localhost:8457/aai/aperture
+{{ if ( include "common.needTLS" .) }}
aperture.service.ssl.key-store=${server.local.startpath}etc/auth/{{ .Values.global.config.keystore.filename }}
aperture.service.ssl.trust-store=${server.local.startpath}etc/auth/{{ .Values.global.config.truststore.filename }}
aperture.service.ssl.key-store-password=password({{ .Values.global.config.keystore.passwd }})
aperture.service.ssl.trust-store-password=password({{ .Values.global.config.truststore.passwd }})
+{{ end }}
aperture.service.timeout-in-milliseconds=300000
heritage: {{ .Release.Service }}
spec:
replicas: {{ .Values.replicaCount }}
+ minReadySeconds: {{ .Values.minReadySeconds }}
+ strategy:
+ type: {{ .Values.updateStrategy.type }}
+ rollingUpdate:
+ maxUnavailable: {{ .Values.updateStrategy.maxUnavailable }}
+ maxSurge: {{ .Values.updateStrategy.maxSurge }}
selector:
matchLabels:
app: {{ include "common.name" . }}
checksum/config: {{ include (print $.Template.BasePath "/configmap.yaml") . | sha256sum }}
spec:
hostname: aai-graphadmin
+ terminationGracePeriodSeconds: {{ .Values.service.terminationGracePeriodSeconds }}
{{ if .Values.global.initContainers.enabled }}
initContainers:
- command:
value: {{ .Values.global.config.userId | quote }}
- name: LOCAL_GROUP_ID
value: {{ .Values.global.config.groupId | quote }}
+ - name: INTERNAL_PORT_1
+ value: {{ .Values.service.internalPort | quote }}
+ - name: INTERNAL_PORT_2
+ value: {{ .Values.service.internalPort2 | quote }}
volumeMounts:
- mountPath: /etc/localtime
name: localtime
ports:
- containerPort: {{ .Values.service.internalPort }}
- containerPort: {{ .Values.service.internalPort2 }}
+ lifecycle:
+ # wait for active requests (long-running tasks) to be finished
+ # Before the SIGTERM is invoked, Kubernetes exposes a preStop hook in the Pod.
+ preStop:
+ exec:
+ command:
+ - sh
+ - -c
+ - |
+ while (netstat -an | grep ESTABLISHED | grep -e $INTERNAL_PORT_1 -e $INTERNAL_PORT_2)
+ do sleep 10
+ done
# disable liveness probe when breakpoints set in debugger
# so K8s doesn't restart unresponsive container
{{ if .Values.liveness.enabled }}
{{ end }}
restartPolicy: {{ .Values.restartPolicy }}
imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ - name: {{ include "common.namespace" . }}-docker-registry-key
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
command:
- /bin/bash
- - docker-entrypoint.sh
- - dataSnapshot.sh
+ - -c
+ - |
+ bash docker-entrypoint.sh dataSnapshot.sh ;
+ {{- include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
env:
- name: LOCAL_USER_ID
value: {{ .Values.global.config.userId | quote }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
command:
- /bin/bash
- - docker-entrypoint.sh
- - createDBSchema.sh
+ - -c
+ - |
+ bash docker-entrypoint.sh createDBSchema.sh ;
+ {{- include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
env:
- name: LOCAL_USER_ID
value: {{ .Values.global.config.userId | quote }}
{{ end }}
restartPolicy: Never
imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ - name: {{ include "common.namespace" . }}-docker-registry-key
{{ end }}
command:
- /bin/bash
- -c
- - bash docker-entrypoint.sh run_Migrations.sh -e UpdateAaiUriIndexMigration --commit --skipPreMigrationSnapShot --runDisabled RebuildAllEdges
+ - |
+ bash docker-entrypoint.sh run_Migrations.sh -e UpdateAaiUriIndexMigration --commit --skipPreMigrationSnapShot --runDisabled RebuildAllEdges ;
+ {{- include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
env:
- name: LOCAL_USER_ID
value: {{ .Values.global.config.userId | quote }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
command:
- /bin/bash
- - docker-entrypoint.sh
- - dataSnapshot.sh
+ - -c
+ - |
+ bash docker-entrypoint.sh dataSnapshot.sh ;
+ {{- include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
env:
- name: LOCAL_USER_ID
value: {{ .Values.global.config.userId | quote }}
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
name: {{ .Values.service.portName2 }}
{{- else -}}
- port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
name: {{ .Values.service.portName2 }}
{{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ include "common.release" . }}
- clusterIP: None
# Schema specific properties that include supported versions of api
schema:
# Specifies if the connection should be one way ssl, two way ssl or no auth
+ # will be set to no-auth if tls is disabled
service:
client: one-way-ssl
# Specifies which translator to use if it has schema-service, then it will
flavorOverride: small
# default number of instances
replicaCount: 1
+# the minimum number of seconds that a newly created Pod should be ready
+minReadySeconds: 30
+updateStrategy:
+ type: RollingUpdate
+ # The number of pods that can be unavailable during the update process
+ maxUnavailable: 0
+ # The number of pods that can be created above the desired amount of pods during an update
+ maxSurge: 1
# Configuration for the graphadmin deployment
config:
# Specify the profiles for the graphadmin microservice
profiles:
- active: "dmaap,one-way-ssl"
+ # one way ssl profile will be set unless tlsEnabled is set to false or serviceMesh is enabled and
+ # serviceMesh.tls is set to tru
+ active: dmaap #,one-way-ssl"
# Specifies the timeout limit for the REST API requests
timeout:
service:
type: ClusterIP
# REST API port for the graphadmin microservice
- portName: aai-graphadmin-8449
+ portName: http
internalPort: 8449
- portName2: aai-graphadmin-5005
+ portName2: tcp-5005
internalPort2: 5005
+ terminationGracePeriodSeconds: 120
ingress:
enabled: false
# Model Loader Distribution Client Configuration
*/}}
ml.distribution.ACTIVE_SERVER_TLS_AUTH=false
+{{ if ( include "common.needTLS" .) }}
ml.distribution.ASDC_ADDRESS=sdc-be.{{.Release.Namespace}}:8443
-ml.distribution.CONSUMER_GROUP=aai-ml-group
-ml.distribution.CONSUMER_ID=aai-ml
-ml.distribution.ENVIRONMENT_NAME=AUTO
+ml.distribution.ASDC_USE_HTTPS=true
ml.distribution.KEYSTORE_PASSWORD=
ml.distribution.KEYSTORE_FILE=asdc-client.jks
ml.distribution.PASSWORD=OBF:1ks51l8d1o3i1pcc1r2r1e211r391kls1pyj1z7u1njf1lx51go21hnj1y0k1mli1sop1k8o1j651vu91mxw1vun1mze1vv11j8x1k5i1sp11mjc1y161hlr1gm41m111nkj1z781pw31kku1r4p1e391r571pbm1o741l4x1ksp
+{{ else }}
+ml.distribution.ASDC_ADDRESS=sdc-be.{{.Release.Namespace}}:8080
+ml.distribution.ASDC_USE_HTTPS=false
+{{ end }}
+ml.distribution.CONSUMER_GROUP=aai-ml-group
+ml.distribution.CONSUMER_ID=aai-ml
+ml.distribution.ENVIRONMENT_NAME=AUTO
ml.distribution.POLLING_INTERVAL=30
ml.distribution.POLLING_TIMEOUT=20
ml.distribution.USER=aai
ml.distribution.MSG_BUS_ADDRESSES=message-router.{{.Release.Namespace}}
# Model Loader AAI REST Client Configuration
+{{ if ( include "common.needTLS" .) }}
ml.aai.BASE_URL=https://aai.{{.Release.Namespace}}:8443
+ml.aai.KEYSTORE_FILE=aai-os-cert.p12
+ml.aai.KEYSTORE_PASSWORD=OBF:1i9a1u2a1unz1lr61wn51wn11lss1unz1u301i6o
+{{ else }}
+ml.aai.BASE_URL=http://aai.{{.Release.Namespace}}:8080
+{{ end }}
ml.aai.MODEL_URL=/aai/v*/service-design-and-creation/models/model/
ml.aai.NAMED_QUERY_URL=/aai/v*/service-design-and-creation/named-queries/named-query/
ml.aai.VNF_IMAGE_URL=/aai/v*/service-design-and-creation/vnf-images
-ml.aai.KEYSTORE_FILE=aai-os-cert.p12
-ml.aai.KEYSTORE_PASSWORD=OBF:1i9a1u2a1unz1lr61wn51wn11lss1unz1u301i6o
+
ml.aai.AUTH_USER=ModelLoader
ml.aai.AUTH_PASSWORD=OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw
# Model Loader Babel REST Client Configuration\r
-ml.babel.BASE_URL=https://aai-babel.{{.Release.Namespace}}:9516
+ml.babel.BASE_URL={{ include "common.scheme" . }}://aai-babel.{{.Release.Namespace}}:9516
ml.babel.GENERATE_ARTIFACTS_URL=/services/babel-service/v1/app/generateArtifacts
+{{ if ( include "common.needTLS" .) }}
ml.babel.KEYSTORE_FILE=babel-client-cert.p12
ml.babel.KEYSTORE_PASSWORD=OBF:1y0q1uvc1uum1uvg1pil1pjl1uuq1uvk1uuu1y10
ml.babel.TRUSTSTORE_FILE=tomcat_keystore
ml.babel.TRUSTSTORE_PASSWORD=OBF:1y0q1uvc1uum1uvg1pil1pjl1uuq1uvk1uuu1y10
+{{ end }}
service:
type: NodePort
- portName: aai-modelloader
+ portName: http
externalPort: 8080
internalPort: 8080
nodePort: 10
- portName2: aai-modelloader-ssl
+ portName2: https
externalPort2: 8443
internalPort2: 8443
nodePort2: 29
# this could come from siteconfig.pl?
aai.config.nodename=AutomaticallyOverwritten
+{{ if ( include "common.needTLS" .) }}
aai.server.url.base=https://aai.{{ include "common.namespace" . }}:8443/aai/
aai.server.url=https://aai.{{ include "common.namespace" . }}:8443/aai/{{ .Values.global.config.schema.version.api.default }}/
aai.global.callback.url=https://aai.{{ include "common.namespace" . }}:8443/aai/
+{{ else }}
+aai.server.url.base=http://aai.{{ include "common.namespace" . }}/aai/
+aai.server.url=http://aai.{{ include "common.namespace" . }}/aai/{{ .Values.global.config.schema.version.api.default }}/
+aai.global.callback.url=http://aai.{{ include "common.namespace" . }}/aai/
+{{ end }}
{{ if .Values.global.config.basic.auth.enabled }}
aai.tools.enableBasicAuth=true
aai.tools.password={{ .Values.global.config.basic.auth.passwd }}
{{ end }}
+{{ if ( include "common.needTLS" .) }}
aai.truststore.filename={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks
aai.truststore.passwd.x=${TRUSTSTORE_PASSWORD}
aai.keystore.filename={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
aai.keystore.passwd.x=${KEYSTORE_PASSWORD}
+{{ end }}
aai.notification.current.version={{ .Values.global.config.schema.version.api.default }}
aai.notificationEvent.default.status=UNPROCESSED
server.servlet.context-path=/
spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration,org.keycloak.adapters.springboot.KeycloakAutoConfiguration,org.springframework.boot.autoconfigure.security.servlet.SecurityAutoConfiguration
-
-spring.profiles.active={{ .Values.global.config.profiles.active }}
+spring.profiles.active={{ .Values.global.config.profiles.active }}{{ .Values.global.aafEnabled | ternary ",aaf-auth" "" }}
spring.jersey.application-path=${schema.uri.base.path}
#The max number of active threads in this pool
server.tomcat.max-threads=200
server.basic.auth.location=${server.local.startpath}etc/auth/realm.properties
server.port=8447
+{{ if ( include "common.needTLS" .) }}
server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
server.ssl.key-store={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
server.ssl.key-store-password=${KEYSTORE_PASSWORD}
server.ssl.trust-store-password=${TRUSTSTORE_PASSWORD}
server.ssl.client-auth=want
server.ssl.key-store-type=JKS
+{{ else }}
+security.require-ssl=false
+server.ssl.enabled=false
+{{ end }}
# JMS bind address host port
jms.bind.address=tcp://localhost:61647
-dmaap.ribbon.listOfServers=message-router.{{.Release.Namespace}}:3905
-dmaap.ribbon.transportType=https
+dmaap.ribbon.listOfServers=message-router.{{.Release.Namespace}}:{{ (eq "true" (include "common.needTLS" .)) | ternary 3905 3904 }}
+dmaap.ribbon.transportType={{ include "common.scheme" . }}
# Schema related attributes for the oxm and edges
# Any additional schema related attributes should start with prefix schema
schema.version.api.default={{ .Values.global.config.schema.version.api.default }}
schema.translator.list={{ .Values.global.config.schema.translator.list }}
-schema.service.base.url=https://aai-schema-service.{{ include "common.namespace" . }}:8452/aai/schema-service/v1/
+schema.service.base.url={{ include "common.scheme" . }}://aai-schema-service.{{ include "common.namespace" . }}:8452/aai/schema-service/v1/
schema.service.nodes.endpoint=nodes?version=
schema.service.edges.endpoint=edgerules?version=
schema.service.versions.endpoint=versions
-schema.service.client={{ .Values.global.config.schema.service.client }}
+schema.service.client={{ (eq "true" ( include "common.needTLS" .)) | ternary .Values.global.config.schema.service.client "no-auth" }}
+{{ if ( include "common.needTLS" .) }}
schema.service.ssl.key-store={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
schema.service.ssl.trust-store={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks
schema.service.ssl.key-store-password=${KEYSTORE_PASSWORD}
schema.service.ssl.trust-store-password=${TRUSTSTORE_PASSWORD}
+{{ end }}
heritage: {{ .Release.Service }}
spec:
replicas: {{ .Values.replicaCount }}
+ minReadySeconds: {{ .Values.minReadySeconds }}
+ strategy:
+ type: {{ .Values.updateStrategy.type }}
+ rollingUpdate:
+ maxUnavailable: {{ .Values.updateStrategy.maxUnavailable }}
+ maxSurge: {{ .Values.updateStrategy.maxSurge }}
selector:
matchLabels:
app: {{ include "common.name" . }}
{{- end }}
spec:
hostname: aai-resources
+ terminationGracePeriodSeconds: {{ .Values.service.terminationGracePeriodSeconds }}
initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
- name: {{ include "common.name" . }}-readiness
command:
value: '-Djavax.net.ssl.trustStore={{ .Values.certInitializer.credsPath }}/truststoreONAPall.jks -Djavax.net.ssl.trustStorePassword={{ .Values.certInitializer.truststorePassword }}'
- name: TRUSTORE_ALL_PASSWORD
value: {{ .Values.certInitializer.truststorePassword }}
+ - name: INTERNAL_PORT_1
+ value: {{ .Values.service.internalPort | quote }}
+ - name: INTERNAL_PORT_2
+ value: {{ .Values.service.internalPort2 | quote }}
volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
- mountPath: /etc/localtime
name: localtime
ports:
- containerPort: {{ .Values.service.internalPort }}
- containerPort: {{ .Values.service.internalPort2 }}
+ lifecycle:
+ # wait for active requests (long-running tasks) to be finished
+ # Before the SIGTERM is invoked, Kubernetes exposes a preStop hook in the Pod.
+ preStop:
+ exec:
+ command:
+ - sh
+ - -c
+ - |
+ while (netstat -an | grep ESTABLISHED | grep -e $INTERNAL_PORT_1 -e $INTERNAL_PORT_2)
+ do sleep 10
+ done
# disable liveness probe when breakpoints set in debugger
# so K8s doesn't restart unresponsive container
{{- if .Values.liveness.enabled }}
{{ if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
name: {{ .Values.service.portName2 }}
{{- else -}}
- port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
name: {{ .Values.service.portName2 }}
{{- end }}
migration:
enabled: false
+ aafEnabled: false
+
config:
# Specifies that the cluster connected to a dynamic
# cluster being spinned up by kubernetes deployment
# Active spring profiles for the resources microservice
profiles:
- active: production,dmaap,aaf-auth #,keycloak
+ # aaf-auth profile will be automatically set if aaf enabled is set to true
+ active: production,dmaap #,aaf-auth
# Notification event specific properties
notification:
flavorOverride: small
# default number of instances
replicaCount: 1
+# the minimum number of seconds that a newly created Pod should be ready
+minReadySeconds: 30
+updateStrategy:
+ type: RollingUpdate
+ # The number of pods that can be unavailable during the update process
+ maxUnavailable: 0
+ # The number of pods that can be created above the desired amount of pods during an update
+ maxSurge: 1
# Configuration for the resources deployment
config:
service:
type: ClusterIP
- portName: aai-resources-8447
+ portName: http
internalPort: 8447
- portName2: aai-resources-5005
+ portName2: tcp-5005
internalPort2: 5005
+ terminationGracePeriodSeconds: 120
ingress:
enabled: false
# ============LICENSE_END=========================================================
*/}}
+{{ if ( include "common.needTLS" .) }}
aai.server.url.base=https://aai.{{ include "common.namespace" . }}:8443/aai/
aai.server.url=https://aai.{{ include "common.namespace" . }}:8443/aai/{{ .Values.global.config.schema.version.api.default }}/
aai.global.callback.url=https://aai.{{ include "common.namespace" . }}:8443/aai/
+{{ else }}
+aai.server.url.base=http://aai.{{ include "common.namespace" . }}/aai/
+aai.server.url=http://aai.{{ include "common.namespace" . }}/aai/{{ .Values.global.config.schema.version.api.default }}/
+aai.global.callback.url=http://aai.{{ include "common.namespace" . }}/aai/
+{{ end }}
-{{ if .Values.global.config.basic.auth.enabled }}
+{{ if or (.Values.global.config.basic.auth.enabled) ( include "common.onServiceMesh" .) }}
aai.tools.enableBasicAuth=true
aai.tools.username={{ .Values.global.config.basic.auth.username }}
aai.tools.password={{ .Values.global.config.basic.auth.passwd }}
{{ end }}
+{{ if ( include "common.needTLS" .) }}
aai.truststore.filename={{ .Values.global.config.truststore.filename }}
aai.truststore.passwd.x={{ .Values.global.config.truststore.passwd }}
aai.keystore.filename={{ .Values.global.config.keystore.filename }}
aai.keystore.passwd.x={{ .Values.global.config.keystore.passwd }}
+{{ end }}
aai.default.api.version={{ .Values.global.config.schema.version.api.default }}
server.basic.auth.location=${server.local.startpath}/etc/auth/realm.properties
server.port=8452
+{{ if ( include "common.needTLS" .) }}
server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
server.ssl.key-store=${server.local.startpath}/etc/auth/{{ .Values.global.config.keystore.filename }}
server.ssl.key-store-password=password({{ .Values.global.config.keystore.passwd }})
server.ssl.trust-store-password=password({{ .Values.global.config.truststore.passwd }})
server.ssl.client-auth=want
server.ssl.key-store-type=JKS
+{{ else }}
+security.require-ssl=false
+server.ssl.enabled=false
+{{ end }}
schema.configuration.location=N/A
schema.source.name={{ .Values.global.config.schema.source.name }}
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
name: {{ .Values.service.portName2 }}
{{- else -}}
- port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
name: {{ .Values.service.portName2 }}
- {{- end}}
+ {{- end }}
selector:
app: {{ include "common.name" . }}
release: {{ include "common.release" . }}
- clusterIP: None
service:
type: ClusterIP
- portName: aai-schema-service-8452
+ portName: http
internalPort: 8452
- portName2: aai-schema-service-5005
+ portName2: tcp-5005
internalPort2: 5005
ingress:
#schemaServiceTranslator is used to define whether to retreive the oxm from schema service microservice or read from the disk, possible values are schema-service/config
oxm.schemaServiceTranslatorList=config
# The end point for onap is https://<hostname>:<port>/onap/schema-service/v1/
+{{ if ( include "common.needTLS" .) }}
oxm.schemaServiceBaseUrl=https://<schema-service/config>/aai/schema-service/v1/
oxm.schemaServiceKeystore=file:{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
oxm.schemaServiceTruststore=file:{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks
oxm.schemaServiceKeystorePassword=${KEYSTORE_PASSWORD}
oxm.schemaServiceTruststorePassword=${TRUSTSTORE_PASSWORD}
-
+{{ else }}
+oxm.schemaServiceBaseUrl=http://<schema-service/config>/aai/schema-service/v1/
+{{ end }}
# Schema Service need this variable for the time being
*/}}
resources.hostname=aai
+{{ if ( include "common.needTLS" .) }}
resources.port=8443
resources.authType=SSL_BASIC
resources.basicAuthUserName=aai@aai.onap.org
resources.trust-store-password=${TRUSTSTORE_PASSWORD}
resources.client-cert={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
resources.client-cert-password=${KEYSTORE_PASSWORD}
+{{ else }}
+resources.port=8080
+resources.authType=HTTP_NOAUTH
+{{ end }}
# limitations under the License.
server.port=8000
+{{ if ( include "common.needTLS" .) }}
server.ssl.key-store=file:{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
server.ssl.key-store-password=${KEYSTORE_PASSWORD}
server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
server.ssl.trust-store=file:{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks
server.ssl.trust-store-password=${TRUSTSTORE_PASSWORD}
+{{ else }}
+security.require-ssl=false
+server.ssl.enabled=false
+{{ end }}
# and in the values.yaml change the internalPort to 9517
#
-spring.profiles.active=camel,ssl,fe-prod,oxm-schema-prod,oxm-default,resources,aai-proxy
+spring.profiles.active=camel,fe-prod,oxm-schema-prod,oxm-default,resources,aai-proxy,{{ ( eq "true" ( include "common.needTLS" .)) | ternary "ssl" "http" }}
portal.cadiFileLocation={{.Values.config.cadiFileLocation}}
searchservice.hostname={{.Values.global.searchData.serviceName}}
searchservice.port=9509
+{{ if ( include "common.needTLS" .) }}
searchservice.client-cert={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
searchservice.client-cert-password=${KEYSTORE_PASSWORD}
searchservice.truststore={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks
searchservice.truststore-password=${TRUSTSTORE_PASSWORD}
+{{ end }}
schema.ingest.file=${CONFIG_HOME}/schemaIngest.properties
name: {{ include "common.name" . }}
spec:
initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
+ {{- if ( include "common.needTLS" .) }}
- command:
- sh
args:
image: {{ include "repositoryGenerator.image.envsubst" . }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
name: {{ include "common.name" . }}-update-config
+ {{- end }}
- command:
- /app/ready.py
args:
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
{{- else -}}
- port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
- {{- end}}
+ name: {{ .Values.service.portName }}{{ ternary "s" "" (eq "true" (include "common.needTLS" .)) }}
+ {{- end }}
selector:
app: {{ include "common.name" . }}
release: {{ include "common.release" . }}
service:
type: NodePort
- portName: aai-sparky-be
+ portName: http
internalPort: 8000
nodePort: 20
# this could come from siteconfig.pl?
aai.config.nodename=AutomaticallyOverwritten
+{{ if ( include "common.needTLS" .) }}
aai.server.url.base=https://aai.{{ include "common.namespace" . }}:8443/aai/
aai.server.url=https://aai.{{ include "common.namespace" . }}:8443/aai/{{ .Values.global.config.schema.version.api.default }}/
aai.global.callback.url=https://aai.{{ include "common.namespace" . }}:8443/aai/
+{{else}}
+aai.server.url.base=http://aai.{{ include "common.namespace" . }}/aai/
+aai.server.url=http://aai.{{ include "common.namespace" . }}/aai/{{ .Values.global.config.schema.version.api.default }}/
+aai.global.callback.url=http://aai.{{ include "common.namespace" . }}/aai/
+{{ end }}
-{{ if .Values.global.config.basic.auth.enabled }}
+{{ if or (.Values.global.config.basic.auth.enabled) ( include "common.onServiceMesh" .) }}
aai.tools.enableBasicAuth=true
aai.tools.username={{ .Values.global.config.basic.auth.username }}
aai.tools.password={{ .Values.global.config.basic.auth.passwd }}
{{ end }}
+{{ if ( include "common.needTLS" .) }}
aai.truststore.filename={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks
aai.truststore.passwd.x=${TRUSTSTORE_PASSWORD}
aai.keystore.filename={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
aai.keystore.passwd.x=${KEYSTORE_PASSWORD}
+{{ end }}
aai.notification.current.version={{ .Values.global.config.schema.version.api.default }}
aai.notificationEvent.default.status=UNPROCESSED
spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
-spring.profiles.active={{ .Values.global.config.profiles.active }}
+spring.profiles.active={{ .Values.global.config.profiles.active }}{{ (eq "true" (include "common.needTLS" .)) | ternary ",one-way-ssl" "" }}
spring.jersey.application-path=${schema.uri.base.path}
#The max number of active threads in this pool
server.tomcat.max-threads=200
server.basic.auth.location=${server.local.startpath}etc/auth/realm.properties
server.port=8446
+{{ if ( include "common.needTLS" .) }}
server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
server.ssl.key-store={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
server.ssl.key-store-password=${KEYSTORE_PASSWORD}
server.ssl.trust-store-password=${TRUSTSTORE_PASSWORD}
server.ssl.client-auth=want
server.ssl.key-store-type=JKS
+{{ else }}
+security.require-ssl=false
+server.ssl.enabled=false
+{{ end }}
# JMS bind address host port
jms.bind.address=tcp://localhost:61647
-dmaap.ribbon.listOfServers=message-router.{{ include "common.namespace" . }}:3905
-dmaap.ribbon.transportType=https
+dmaap.ribbon.listOfServers=message-router.{{ include "common.namespace" . }}:{{ (eq "true" (include "common.needTLS" .)) | ternary 3905 3904 }}
+dmaap.ribbon.transportType={{ include "common.scheme" . }}
# Schema related attributes for the oxm and edges
# Any additional schema related attributes should start with prefix schema
schema.version.api.default={{ .Values.global.config.schema.version.api.default }}
schema.translator.list={{ .Values.global.config.schema.translator.list }}
-schema.service.base.url=https://aai-schema-service.{{ include "common.namespace" . }}:8452/aai/schema-service/v1/
+schema.service.base.url={{ include "common.scheme" . }}://aai-schema-service.{{ include "common.namespace" . }}:8452/aai/schema-service/v1/
schema.service.nodes.endpoint=nodes?version=
schema.service.edges.endpoint=edgerules?version=
schema.service.versions.endpoint=versions
schema.service.custom.queries.endpoint=stored-queries
-schema.service.client={{ .Values.global.config.schema.service.client }}
+schema.service.client={{ (eq "true" (include "common.needTLS" .)) | ternary .Values.global.config.schema.service.client "no-auth" }}
+{{ if ( include "common.needTLS" .) }}
schema.service.ssl.key-store={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.p12
schema.service.ssl.trust-store={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.fqi_namespace }}.trust.jks
schema.service.ssl.key-store-password=${KEYSTORE_PASSWORD}
schema.service.ssl.trust-store-password=${TRUSTSTORE_PASSWORD}
+{{ end }}
heritage: {{ .Release.Service }}
spec:
replicas: {{ .Values.replicaCount }}
+ minReadySeconds: {{ .Values.minReadySeconds }}
+ strategy:
+ type: {{ .Values.updateStrategy.type }}
+ rollingUpdate:
+ maxUnavailable: {{ .Values.updateStrategy.maxUnavailable }}
+ maxSurge: {{ .Values.updateStrategy.maxSurge }}
selector:
matchLabels:
app: {{ include "common.name" . }}
{{- end }}
spec:
hostname: aai-traversal
+ terminationGracePeriodSeconds: {{ .Values.service.terminationGracePeriodSeconds }}
initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
- command:
- /app/ready.py
value: {{ .Values.global.config.userId | quote }}
- name: LOCAL_GROUP_ID
value: {{ .Values.global.config.groupId | quote }}
+ - name: INTERNAL_PORT_1
+ value: {{ .Values.service.internalPort | quote }}
+ - name: INTERNAL_PORT_2
+ value: {{ .Values.service.internalPort2 | quote }}
volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
- mountPath: /etc/localtime
name: localtime
ports:
- containerPort: {{ .Values.service.internalPort }}
- containerPort: {{ .Values.service.internalPort2 }}
+ lifecycle:
+ # wait for active requests (long-running tasks) to be finished
+ # Before the SIGTERM is invoked, Kubernetes exposes a preStop hook in the Pod.
+ preStop:
+ exec:
+ command:
+ - sh
+ - -c
+ - |
+ while (netstat -an | grep ESTABLISHED | grep -e $INTERNAL_PORT_1 -e $INTERNAL_PORT_2)
+ do sleep 10
+ done
# disable liveness probe when breakpoints set in debugger
# so K8s doesn't restart unresponsive container
{{ if .Values.liveness.enabled }}
- bash
- "-c"
- |
- set -x
- if [ ! -d /opt/aai/logroot/AAI-GQ/misc ]; then mkdir -p /opt/aai/logroot/AAI-GQ/misc; fi
- until nc -w10 -z -v aai.{{.Release.Namespace}} 8443; do echo "Retrying to reach aai on port 8443"; done;
- bash -x /opt/app/aai-traversal/docker-entrypoint.sh install/updateQueryData.sh
+ set -x
+ if [ ! -d /opt/aai/logroot/AAI-GQ/misc ]; then mkdir -p /opt/aai/logroot/AAI-GQ/misc; fi
+ {{- if (include "common.needTLS" .) }}
+ until nc -w10 -z -v aai.{{.Release.Namespace}} 8443; do echo "Retrying to reach aai on port 8443"; done;
+ bash -x /opt/app/aai-traversal/docker-entrypoint.sh install/updateQueryData.sh
+ {{- else }}
+ until nc -w10 -z -v aai.{{.Release.Namespace}} 80; do echo "Retrying to reach aai on port 80"; done;
+ bash -x /opt/app/aai-traversal/docker-entrypoint.sh install/updateQueryData.sh ;
+ {{- include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
+ {{- end }}
env:
- name: LOCAL_USER_ID
value: {{ .Values.global.config.userId | quote }}
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
name: {{ .Values.service.portName2 }}
{{- else -}}
- port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName }}{{ (eq "true" (include "common.needTLS" .)) | ternary "s" "" }}
- port: {{ .Values.service.internalPort2 }}
name: {{ .Values.service.portName2 }}
- {{- end}}
+ {{- end }}
selector:
app: {{ include "common.name" . }}
release: {{ include "common.release" . }}
# Active spring profiles for the resources microservice
profiles:
- active: production,dmaap,aaf-auth #,keycloak
+ active: production,dmaap #,aaf-auth ,keycloak
# Notification event specific properties
notification:
restartPolicy: Always
flavor: small
flavorOverride: small
+# the minimum number of seconds that a newly created Pod should be ready
+minReadySeconds: 30
+updateStrategy:
+ type: RollingUpdate
+ # The number of pods that can be unavailable during the update process
+ maxUnavailable: 0
+ # The number of pods that can be created above the desired amount of pods during an update
+ maxSurge: 1
api_list:
- 11
service:
type: ClusterIP
- portName: aai-traversal-8446
+ portName: http
internalPort: 8446
- portName2: aai-traversal-5005
+ portName2: tcp-5005
internalPort2: 5005
+ terminationGracePeriodSeconds: 120
ingress:
enabled: false
#######################
-#DEFAULT BACKEND 847###
+#DEFAULT BACKEND 8447##
#######################
backend IST_Default_8447
log global
mode http
option httplog
+{{- if ( include "common.needTLS" .) }}
option ssl-hello-chk
+{{- end }}
option httpchk GET /aai/util/echo HTTP/1.1\r\nHost:\ aai\r\nX-TransactionId:\ haproxy-0111\r\nX-FromAppId:\ haproxy\r\nAccept:\ application/json\r\nAuthorization:\ Basic\ QUFJOkFBSQ==
default-server init-addr none
# option dontlognull
timeout http-keep-alive 30000
+frontend IST_8080
+ mode http
+ bind 0.0.0.0:8080
+ log-format "%ci:%cp [%tr] %ft %b/%s %TR/%Tw/%Tc/%Tr/%Ta %ST %B %CC \ %CS %tsc %ac/%fc/%bc/%sc/%rc %sq/%bq %hr %hs %{+Q}r"
+ option httplog
+ log global
+ option logasap
+ option forwardfor
+ capture request header Host len 100
+ capture response header Host len 100
+ option log-separate-errors
+ option forwardfor
+ http-request set-header X-Forwarded-Proto http
+ reqadd X-Forwarded-Proto:\ http
+ reqadd X-Forwarded-Port:\ 8080
+
+#######################
+#ACLS FOR PORT 8446####
+#######################
+
+ acl is_Port_8446_generic path_reg -i ^/aai/v[0-9]+/search/generic-query$
+ acl is_Port_8446_nodes path_reg -i ^/aai/v[0-9]+/search/nodes-query$
+ acl is_Port_8446_version path_reg -i ^/aai/v[0-9]+/query$
+ acl is_dsl path_reg -i ^/aai/v[0-9]+/dsl$
+ acl is_named-query path_beg -i /aai/search/named-query
+ acl is_search-model path_beg -i /aai/search/model
+ use_backend IST_AAI_8446 if is_Port_8446_generic or is_Port_8446_nodes or is_Port_8446_version or is_named-query or is_search-model or is_dsl
+
+ default_backend IST_Default_8447
+
+{{- if ( include "common.needTLS" .) }}
frontend IST_8443
mode http
bind 0.0.0.0:8443 name https ssl crt /opt/app/osaaf/local/certs/fullchain.pem
http-request set-header X-AAI-SSL-Client-O %{+Q}[ssl_c_s_dn(O)]
reqadd X-Forwarded-Proto:\ https
reqadd X-Forwarded-Port:\ 8443
+{{- end }}
#######################
#ACLS FOR PORT 8446####
default_backend IST_Default_8447
-
#######################
-#DEFAULT BACKEND 847###
+#DEFAULT BACKEND 8447##
#######################
backend IST_Default_8447
balance roundrobin
http-request set-header X-Forwarded-Port %[src_port]
http-response set-header Strict-Transport-Security max-age=16000000;\ includeSubDomains;\ preload;
+{{- if ( include "common.needTLS" .) }}
server aai-resources.{{.Release.Namespace}} aai-resources.{{.Release.Namespace}}.svc.cluster.local:8447 resolvers kubernetes check check-ssl port 8447 ssl verify none
-
+{{- else }}
+ server aai-resources.{{.Release.Namespace}} aai-resources.{{.Release.Namespace}}.svc.cluster.local:8447 resolvers kubernetes check port 8447
+{{- end }}
#######################
# BACKEND 8446#########
balance roundrobin
http-request set-header X-Forwarded-Port %[src_port]
http-response set-header Strict-Transport-Security max-age=16000000;\ includeSubDomains;\ preload;
+{{- if ( include "common.needTLS" .) }}
server aai-traversal.{{.Release.Namespace}} aai-traversal.{{.Release.Namespace}}.svc.cluster.local:8446 resolvers kubernetes check check-ssl port 8446 ssl verify none
-
+{{- else }}
+ server aai-traversal.{{.Release.Namespace}} aai-traversal.{{.Release.Namespace}}.svc.cluster.local:8446 resolvers kubernetes check port 8446
+{{- end }}
{{- include "common.certInitializer.volumeMount" . | nindent 8 }}
ports:
- containerPort: {{ .Values.service.internalPort }}
+ - containerPort: {{ .Values.service.internalPlainPort }}
# disable liveness probe when breakpoints set in debugger
# so K8s doesn't restart unresponsive container
{{- if eq .Values.liveness.enabled true }}
livenessProbe:
tcpSocket:
- port: {{ .Values.service.internalPort }}
+ port: {{ (eq "true" (include "common.needTLS" .)) | ternary .Values.service.internalPort .Values.service.internalPlainPort }}
initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
periodSeconds: {{ .Values.liveness.periodSeconds }}
{{ end -}}
readinessProbe:
httpGet:
path: /aai/util/echo
- port: {{ .Values.service.internalPort }}
- scheme: HTTPS
+ port: {{ (eq "true" (include "common.needTLS" .)) | ternary .Values.service.internalPort .Values.service.internalPlainPort }}
+ #scheme: HTTPS
+ scheme: {{ (eq "true" (include "common.needTLS" .)) | ternary "HTTPS" "HTTP" }}
httpHeaders:
- name: X-FromAppId
value: OOM_ReadinessCheck
heritage: {{ .Release.Service }}
spec:
ports:
- {{if eq .Values.service.type "NodePort" -}}
- - name: {{ .Values.service.portName }}
- port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
+ - name: {{ .Values.service.portName }}{{ if (include "common.needTLS" .) }}s{{ end }}
+ port: {{ (eq "true" (include "common.needTLS" .)) | ternary .Values.service.externalPort .Values.service.externalPlainPort }}
+ targetPort: {{ (eq "true" (include "common.needTLS" .)) | ternary .Values.service.internalPort .Values.service.internalPlainPort }}
+ {{- if eq .Values.service.type "NodePort" }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
- {{- end}}
+ {{- end }}
type: {{ .Values.service.type }}
selector:
app: {{ include "common.name" . }}
passwd: AAI
# Active spring profiles for the resources microservice
+ # aaf-auth profile will be automatically set if aaf enabled is set to true
profiles:
- active: production,dmaap,aaf-auth
+ active: production,dmaap #,aaf-auth
# Notification event specific properties
notification:
# Schema specific properties that include supported versions of api
schema:
# Specifies if the connection should be one way ssl, two way ssl or no auth
+ # will be set to no-auth if tls is disabled
service:
client: one-way-ssl
# Specifies which translator to use if it has schema-service, then it will make a rest request to schema service
service:
type: NodePort
- portName: aai-ssl
+ portName: http
externalPort: 8443
internalPort: 8443
nodePort: 33
# POLICY hotfix - Note this must be temporary
# See https://jira.onap.org/browse/POLICY-510
aaiServiceClusterIp:
+ externalPlainPort: 80
+ internalPlainPort: 8080
+ nodeport: 33
ingress:
enabled: false
- baseaddr: "aai.api"
name: "aai"
port: 8443
- config:
- ssl: "redirect"
+ config:
+ ssl: "redirect"
resources:
small:
fieldRef:
apiVersion: v1
fieldPath: metadata.namespace
+ {{- if .Values.metrics.serviceMonitor.enabled }}
+ - name: PROMETHEUS_METRICS_ENABLED
+ value: {{ .Values.metrics.serviceMonitor.enabled | quote }}
+ - name: PROMETHEUS_PORT
+ value: {{ .Values.service.metrics.internalPort | quote }}
+ {{ end }}
image: {{ include "repositoryGenerator.image.readiness" . }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
name: {{ include "common.name" . }}-readiness
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
{{- end}}
name: {{ .Values.service.grpc.portName | default "grpc" }}
+ {{- if .Values.metrics.serviceMonitor.enabled }}
+ - port: {{ .Values.service.metrics.externalPort }}
+ targetPort: {{ .Values.service.metrics.internalPort }}
+ {{- if eq .Values.service.type "NodePort"}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ {{- end}}
+ name: {{ .Values.service.metrics.portName | default "metrics" }}
+ {{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ include "common.release" . }}
\ No newline at end of file
-# Copyright © 2018 Amdocs, Bell Canada
+{{/*
+# Copyright © 2021 Bitnami, Orange, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+*/}}
-apiVersion: v1
-description: ONAP External System Register GUI
-name: esr-server
-version: 8.0.0
+{{- if .Values.metrics.serviceMonitor.enabled }}
+{{ include "common.serviceMonitor" . }}
+{{- end }}
\ No newline at end of file
portName: command-executor-grpc
internalPort: 50051
externalPort: 50051
+ metrics:
+ portName: command-executor-metrics
+ internalPort: 10005
+ externalPort: 10005
persistence:
enabled: true
nameOverride: cds-command-executor
roles:
- read
+
+metrics:
+ serviceMonitor:
+ enabled: false
+ port: command-executor-metrics
+ path: /actuator/prometheus
+ basicAuth:
+ enabled: false
+ externalSecretName: mysecretname
+ externalSecretUserKey: login
+ externalSecretPasswordKey: password
+ selector:
+ app: '{{ include "common.name" . }}'
+ chart: '{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}'
+ release: '{{ .Release.Name }}'
+ heritage: '{{ .Release.Service }}'
ONAP_TRUSTSTORE=${ONAP_TRUSTSTORE:-truststoreONAPall.jks}
JRE_TRUSTSTORE=${JRE_TRUSTSTORE:-$JAVA_HOME/lib/security/cacerts}
TRUSTSTORE_OUTPUT_FILENAME=${TRUSTSTORE_OUTPUT_FILENAME:-truststore.jks}
+SSL_WORKDIR=${SSL_WORKDIR:-/usr/local/share/ca-certificates}
mkdir -p $WORK_DIR
# Dont use onap truststore when aaf is disabled
continue
fi
- if [ ${f: -3} = ".sh" ]; then
+ if echo $f | grep '\.sh$' >/dev/null; then
continue
fi
- if [ ${f: -4} = ".b64" ]
+ if echo $f | grep '\.b64$' >/dev/null; then
then
base64 -d $f > $WORK_DIR/`basename $f .b64`
else
done
for f in $MORE_CERTS_DIR/*; do
- if [ ${f: -4} == ".pem" ]
- then
+ if echo $f | grep '\.pem$' >/dev/null; then
cp $f $WORK_DIR/.
fi
done
# Import Custom Certificates
for f in $WORK_DIR/*; do
- if [ ${f: -4} = ".pem" ]; then
+ if echo $f | grep '\.pem$' >/dev/null; then
echo "importing certificate: $f"
keytool -import -file $f -alias `basename $f` -keystore $WORK_DIR/$TRUSTSTORE_OUTPUT_FILENAME -storepass $TRUSTSTORE_PASSWORD -noprompt
if [ $? != 0 ]; then
fi
fi
done
+
+# Import certificates to Linux SSL Truststore
+cp $CERTS_DIR/*.crt $SSL_WORKDIR/.
+cp $MORE_CERTS_DIR/*.crt $SSL_WORKDIR/.
+update-ca-certificates
+if [ $? != 0 ]
+ then
+ echo "failed importing certificates"
+ exit 1
+ else
+ cp /etc/ssl/certs/ca-certificates.crt $WORK_DIR/.
+fi
\ No newline at end of file
- mountPath: {{ $initRoot.truststoreMountpath }}/{{ $initRoot.truststoreOutputFileName }}
name: updated-truststore
subPath: {{ $initRoot.truststoreOutputFileName }}
+- mountPath: /etc/ssl/certs/ca-certificates.crt
+ name: updated-truststore
+ subPath: ca-certificates.crt
{{- end -}}
{{- end -}}
truststorePasswordSecretName: oom-cert-service-truststore-password
truststorePasswordSecretKey: password
certPostProcessor:
- image: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.3.3
+ image: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.4.0
cd /opt/app/config/cache
for file in $(ls feed*); do
NUM=$(echo "$file" | sed 's/feedConfig-\([0-9]\+\)-resp.json/\1/')
- export DR_LOG_URL_"$NUM"="$(grep -o '"logURL":"[^"]*' "$file" | cut -d '"' -f4)"
+ export DR_LOG_URL_"$NUM"="$(grep -o '"logURL":"[^"]*' "$file" | grep -w "feedlog" | cut -d '"' -f4)"
export DR_FILES_PUBLISHER_URL_"$NUM"="$(grep -o '"publishURL":"[^"]*' "$file" | cut -d '"' -f4)"
done
for file in $(ls drpub*); do
{{- end }}
{{- end -}}
+{{/*
+ generate needed scheme:
+ - https if needTLS
+ - http if not
+*/}}
+
+{{- define "common.scheme" -}}
+ {{- ternary "https" "http" (eq "true" (include "common.needTLS" .)) }}
+{{- end -}}
+
{{- define "common.port.buildCache" -}}
{{- $global := . }}
{{- if not $global.Values._DmaapDrNodePortsCache }}
{{- end -}}
{{- end -}}
{{- end -}}
+
+{{- define "common.serviceMesh.killSidecar" -}}
+{{- if (include "common.onServiceMesh" .) }}
+RCODE="$?";
+echo "*** script finished with exit code $RCODE" ;
+echo "*** killing service mesh sidecar" ;
+curl -sf -X POST http://127.0.0.1:15020/quitquitquit ;
+echo "" ;
+echo "*** exiting with script exit code" ;
+exit "$RCODE"
+{{- end }}
+{{- end -}}
--- /dev/null
+{{/*
+# Copyright © 2021 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{/*
+ Resolve the name of a chart's serviceMonitor.
+
+ The default will be the chart name (or $dot.Values.nameOverride if set).
+ And the use of .Values.metrics.serviceMonitor.name overrides all.
+
+ - .Values.metrics.serviceMonitor.name: override default serviceMonitor (ie. chart) name
+ Example values file addition:
+ metrics:
+ serviceMonitor:
+ enabled: true
+ port: blueprints-processor-http
+ ## specify target port if name is not given to the port in the service definition
+ ##
+ # targetPort: 8080
+ path: /metrics
+ basicAuth:
+ enabled: false
+ externalSecretName: mysecretname
+ externalSecretUserKey: login
+ externalSecretPasswordKey: password
+
+ ## Namespace in which Prometheus is running
+ ##
+ # namespace: monitoring
+
+ ## Interval at which metrics should be scraped.
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
+ ##
+ # interval: 60s
+
+ ## Timeout after which the scrape is ended
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
+ ##
+ # scrapeTimeout: 10s
+
+ ## ServiceMonitor selector labels
+ ## ref: https://github.com/bitnami/charts/tree/master/bitnami/prometheus-operator#prometheus-configuration
+ ##
+ selector:
+ app: '{{ include "common.name" . }}'
+ chart: '{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}'
+ release: '{{ include "common.release" . }}'
+ heritage: '{{ .Release.Service }}'
+
+ ## RelabelConfigs to apply to samples before scraping
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#relabelconfig
+ ## Value is evalued as a template
+ ##
+ relabelings: []
+
+ ## MetricRelabelConfigs to apply to samples before ingestion
+ ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#relabelconfig
+ ## Value is evalued as a template
+ ##
+ metricRelabelings: []
+ # - sourceLabels:
+ # - "__name__"
+ # targetLabel: "__name__"
+ # action: replace
+ # regex: '(.*)'
+ # replacement: 'example_prefix_$1'
+
+*/}}
+{{/*
+ Expand the serviceMonitor name for a chart.
+*/}}
+{{- define "common.serviceMonitorName" -}}
+ {{- $name := default .Chart.Name .Values.nameOverride -}}
+ {{- default $name .Values.metrics.serviceMonitor.name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/* Define the metadata of serviceMonitor
+ The function takes from one to four arguments (inside a dictionary):
+ - .dot : environment (.)
+ - .suffix : a string which will be added at the end of the name (with a '-').
+ - .annotations: the annotations to add
+ - .labels : labels to add
+ Usage example:
+ {{ include "common.serviceMonitorMetadata" ( dict "suffix" "myService" "dot" .) }}
+ {{ include "common.serviceMonitorMetadata" ( dict "annotations" .Values.metrics.serviceMonitor.annotation "dot" .) }}
+*/}}
+
+{{- define "common.serviceMonitorMetadata" -}}
+{{- $dot := default . .dot -}}
+{{- $annotations := default "" .annotations -}}
+{{- $labels := default (dict) .labels -}}
+{{- if $annotations -}}
+annotations:
+{{ include "common.tplValue" (dict "value" $annotations "context" $dot) | indent 2 }}
+{{- end }}
+name: {{ include "common.serviceMonitorName" $dot }}
+{{- if $dot.Values.metrics.serviceMonitor.namespace }}
+namespace: {{ $dot.Values.metrics.serviceMonitor.namespace }}
+{{- else }}
+namespace: {{ include "common.namespace" $dot }}
+{{- end }}
+labels: {{- include "common.labels" (dict "labels" $labels "dot" $dot) | nindent 2 }}
+{{- end -}}
+
+{{/*
+ Create service monitor template
+*/}}
+{{- define "common.serviceMonitor" -}}
+{{- $dot := default . .dot -}}
+{{- $labels := default (dict) .labels -}}
+apiVersion: monitoring.coreos.com/v1
+kind: ServiceMonitor
+metadata:
+{{- include "common.serviceMonitorMetadata" $dot | nindent 2 }}
+spec:
+ endpoints:
+ - path: {{ default "/metrics" $dot.Values.metrics.serviceMonitor.path }}
+ {{- if $dot.Values.metrics.serviceMonitor.port }}
+ port: {{ $dot.Values.metrics.serviceMonitor.port }}
+ {{- else if $dot.Values.metrics.serviceMonitor.targetPort }}
+ targetPort: {{ $dot.Values.metrics.serviceMonitor.targetPort }}
+ {{- else }}
+ port: metrics
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.basicAuth.enabled }}
+ basicAuth:
+ username:
+ key: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretUserKey }}
+ name: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretName }}
+ password:
+ key: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretPasswordKey }}
+ name: {{ $dot.Values.metrics.serviceMonitor.basicAuth.externalSecretName }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.interval }}
+ interval: {{ $dot.Values.metrics.serviceMonitor.interval }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.scrapeTimeout }}
+ scrapeTimeout: {{ $dot.Values.metrics.serviceMonitor.scrapeTimeout }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.relabelings }}
+ relabelings: {{- include "common.tplValue" ( dict "value" $dot.Values.metrics.serviceMonitor.relabelings "context" $dot) | nindent 6 }}
+ {{- end }}
+ {{- if $dot.Values.metrics.serviceMonitor.metricRelabelings }}
+ metricRelabelings: {{- include "common.tplValue" ( dict "value" $dot.Values.metrics.serviceMonitor.metricRelabelings "context" $dot) | nindent 6 }}
+ {{- end }}
+ namespaceSelector:
+ matchNames:
+ - {{ include "common.namespace" $dot }}
+ selector:
+ {{- if $dot.Values.metrics.serviceMonitor.selector }}
+ matchLabels: {{- include "common.tplValue" ( dict "value" $dot.Values.metrics.serviceMonitor.selector "context" $dot) | nindent 6 }}
+ {{- else }}
+ matchLabels: {{- include "common.labels" (dict "labels" $labels "dot" $dot) | nindent 6 }}
+ {{- end }}
+{{- end -}}
{{/*
-# Copyright © 2020 Bitnami, Orange
+# Copyright © 2021 Bitnami, Orange, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# limitations under the License.
*/}}
-{{- if default false (and .Values.global.metrics.enabled .Values.global.metrics.custom_resources) }}
-apiVersion: monitoring.coreos.com/v1
-kind: ServiceMonitor
-metadata:
- name: {{ template "common.fullname" . }}
- {{- if .Values.metrics.serviceMonitor.namespace }}
- namespace: {{ .Values.metrics.serviceMonitor.namespace }}
- {{- else }}
- namespace: {{ include "common.namespace" . }}
- {{- end }}
- labels: {{- include "common.labels" . | nindent 4 }}
- {{- range $key, $value := .Values.metrics.serviceMonitor.selector }}
- {{ $key }}: {{ $value | quote }}
- {{- end }}
-spec:
- selector:
- matchLabels: {{- include "common.matchLabels" . | nindent 6 }}
- endpoints:
- - port: metrics
- {{- if .Values.metrics.serviceMonitor.interval }}
- interval: {{ .Values.metrics.serviceMonitor.interval }}
- {{- end }}
- {{- if .Values.metrics.serviceMonitor.scrapeTimeout }}
- scrapeTimeout: {{ .Values.metrics.serviceMonitor.scrapeTimeout }}
- {{- end }}
- {{- if .Values.metrics.serviceMonitor.relabelings }}
- relabelings: {{- include "common.tplValue" ( dict "value" .Values.metrics.serviceMonitor.relabelings "context" $) | nindent 8 }}
- {{- end }}
- {{- if .Values.metrics.serviceMonitor.metricRelabelings }}
- metricRelabelings: {{- include "common.tplValue" ( dict "value" .Values.metrics.serviceMonitor.metricRelabelings "context" $) | nindent 8 }}
- {{- end }}
- namespaceSelector:
- matchNames:
- - {{ .Release.Namespace }}
+{{- if .Values.metrics.serviceMonitor.enabled }}
+{{ include "common.serviceMonitor" . }}
{{- end }}
.project
.idea/
*.tmproj
+.vscode/
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+appVersion: "1.0"
+description: ONAP timescaledb
+name: timescaledb
+version: 8.0.0
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
-#
+
# http://www.apache.org/licenses/LICENSE-2.0
-#
+
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
dependencies:
- name: common
version: ~8.x-0
- # local reference to common chart, as it is
- # a part of this chart's package and will not
- # be published independently to a repo (at this point)
repository: '@local'
- - name: repositoryGenerator
+ - name: serviceAccount
version: ~8.x-0
repository: '@local'
+ - name: repositoryGenerator
+ version: ~8.x-0
+ repository: 'file://../repositoryGenerator'
--- /dev/null
+#!/bin/bash
+
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+set -e
+set echo on;
+psql --username "$POSTGRES_USER" --dbname "$POSTGRES_DB" <<-EOSQL
+ CREATE USER $DB_USERNAME WITH PASSWORD '$DB_PASSWORD';
+ CREATE SCHEMA $POSTGRES_DB;
+ GRANT ALL PRIVILEGES ON SCHEMA $POSTGRES_DB TO $DB_USERNAME;
+ CREATE EXTENSION IF NOT EXISTS timescaledb WITH SCHEMA $POSTGRES_DB;
+EOSQL
{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
-#
+
# http://www.apache.org/licenses/LICENSE-2.0
-#
+
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
*/}}
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}-log
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-esr-filebeat-configmap
+ name: {{ include "common.fullname" . }}-init
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
release: {{ include "common.release" . }}
heritage: {{ .Release.Service }}
data:
-{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }}
+ init-schema.sh: |-
+{{ .Files.Get "resources/init/init-schema.sh" | indent 4}}
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
-#
+
# http://www.apache.org/licenses/LICENSE-2.0
-#
+
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
-#################################################################
-# Global configuration defaults.
-#################################################################
-
-# application configuration
-config:
- logstashServiceName: log-ls
- logstashPort: 5044
-
-esr-gui:
- enabled: true
\ No newline at end of file
+{{ include "common.PV" . }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "common.secretFast" . }}
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
-#
+
# http://www.apache.org/licenses/LICENSE-2.0
-#
+
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
-dependencies:
- - name: esr-gui
- version: ~8.x-0
- repository: 'file://components/esr-gui'
- condition: esr-gui.enabled
- - name: esr-server
- version: ~8.x-0
- repository: 'file://components/esr-server'
+{{ include "common.service" . }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+apiVersion: apps/v1
+kind: StatefulSet
+metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ selector: {{- include "common.selectors" . | nindent 4 }}
+ serviceName: {{ include "common.servicename" . }}
+ template:
+ metadata: {{- include "common.templateMetadata" . | nindent 6 }}
+ spec:
+ serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . ) }}
+ securityContext:
+ {{- toYaml .Values.podSecurityContext | nindent 8 }}
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.image }}
+ securityContext:
+ {{- toYaml .Values.securityContext | nindent 12 }}
+ imagePullPolicy: {{ .Values.pullPolicy }}
+ ports: {{ include "common.containerPorts" . | nindent 12 }}
+ livenessProbe:
+ exec:
+ command: ["psql", "-w", "-U", "{{ .Values.config.pgRootUserName }}", "-c", "select 1"]
+ initialDelaySeconds: 5
+ periodSeconds: 60
+ readinessProbe:
+ exec:
+ command: ["psql", "-w", "-U", "{{ .Values.config.pgRootUserName }}", "-c", "select 1"]
+ initialDelaySeconds: 5
+ periodSeconds: 30
+ env:
+ - name: DB_USERNAME
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "user-creds" "key" "login") | indent 14 }}
+ - name: DB_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "user-creds" "key" "password") | indent 14 }}
+ - name: POSTGRES_DB
+ value: {{ .Values.config.pgDatabase }}
+ - name: POSTGRES_USER
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "root-creds" "key" "login") | indent 14 }}
+ - name: POSTGRES_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "root-creds" "key" "password") | indent 14 }}
+ - name: PGDATA
+ value: /var/lib/postgresql/data/pgdata
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-init
+ mountPath: /docker-entrypoint-initdb.d
+ - name: {{ include "common.fullname" . }}
+ mountPath: /var/lib/postgresql/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-init
+ configMap:
+ name: {{ include "common.fullname" . }}-init
+ {{- with .Values.nodeSelector }}
+ nodeSelector:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ {{- with .Values.affinity }}
+ affinity:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ {{- with .Values.tolerations }}
+ tolerations:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ {{if and .Values.persistence.enabled (not .Values.persistence.existingClaim) }}
+ volumeClaimTemplates:
+ - {{ include "common.PVCTemplate" (dict "dot" . "suffix" "data" "persistenceInfos" .Values.persistence) | indent 6 | trim }}
+{{- end }}
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+replicaCount: 1
+global:
+ persistence: {}
+
+#################################################################
+# Secrets.
+##############################################################
+image: timescale/timescaledb:2.1.1-pg13
+
+pullPolicy: Always
+containerPorts: 5432
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+ nameOverride: timescaledb
+ roles:
+ - read
+
+podSecurityContext: {}
+ # fsGroup: 2000
+
+securityContext: {}
+ # capabilities:
+ # drop:
+ # - ALL
+ # readOnlyRootFilesystem: true
+ # runAsNonRoot: true
+ # runAsUser: 1000
+
+resources:
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ limits:
+ cpu: 0.5
+ memory: 256Mi
+ requests:
+ cpu: 20m
+ memory: 256Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}
+
+service:
+ type: ClusterIP
+ name: timescaledb
+ ports:
+ - name: tcp-timescaledb
+ port: 5432
+
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ accessMode: ReadWriteOnce
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+
+config:
+ pgUserName: timescaledb
+ pgRootUserName: postgres
+ pgDatabase: timescaledb
+
+secrets:
+ - uid: root-creds
+ type: basicAuth
+ externalSecret: '{{ tpl (default "" .Values.config.pgRootPasswordExternalSecret) . }}'
+ login: '{{ .Values.config.pgRootUserName }}'
+ password: '{{ .Values.config.pgRootpassword }}'
+ - uid: user-creds
+ type: basicAuth
+ externalSecret: '{{ tpl (default "" .Values.config.pgUserExternalSecret) . }}'
+ login: '{{ .Values.config.pgUserName }}'
+ password: '{{ .Values.config.pgUserPassword }}'
+
for line in `parse_yaml $filename`
do
#skiping commented line
- if [ "${line:0:1}" != '#' ]; then
+ if echo "$line" | grep -v '^#' >/dev/null; then
#find all image subtag inside converted values.yaml file's lines
if echo $line | grep -q $IMAGE_TEXT ; then
#find imageName inside line
-# Copyright © 2020 Samsung Electronics
+# Copyright © 2020 Samsung Electronics, Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2020 Samsung Electronics
+# Copyright © 2020 Samsung Electronics, Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# a part of this chart's package and will not
# be published independently to a repo (at this point)
repository: '@local'
+ - name: serviceAccount
+ version: ~8.x-0
+ repository: '@local'
+ - name: repositoryGenerator
+ version: ~8.x-0
+ repository: '@local'
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
resources: {{ include "common.resources" . | nindent 10 }}
+ serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
fsGroup: 1000
runAsUser: 100
runAsGroup: 1000
+
+#Pods Service Account
+serviceAccount:
+ nameOverride: consul-server
+ roles:
+ - read
- name: consul-server
version: ~8.x-0
repository: 'file://components/consul-server'
- condition: cds-command-executor.enabled
+ condition: consul-server.enabled
+ - name: serviceAccount
+ version: ~8.x-0
+ repository: '@local'
- mountPath: /consul/certs
name: consul-agent-certs-config
resources: {{ include "common.resources" . | nindent 10 }}
+ serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . )}}
volumes:
- name: consul-agent-config-dir
emptyDir: {}
fsGroup: 1000
runAsUser: 100
runAsGroup: 1000
+
+#Pods Service Account
+serviceAccount:
+ nameOverride: consul
+ roles:
+ - read
- name: repositoryGenerator
version: ~8.x-0
repository: '@local'
+ - name: cmpv2Config
+ version: ~8.x-0
+ repository: '@local'
}
configureEjbca() {
+ ejbca.sh ca init \
+ --caname ManagementCA \
+ --dn "O=EJBCA Container Quickstart,CN=ManagementCA,UID=12345" \
+ --tokenType soft \
+ --keyspec 3072 \
+ --keytype RSA \
+ -v 3652 \
+ --policy null \
+ -s SHA256WithRSA \
+ -type "x509"
ejbca.sh config cmp addalias --alias cmpRA
ejbca.sh config cmp updatealias --alias cmpRA --key operationmode --value ra
ejbca.sh ca editca --caname ManagementCA --field cmpRaAuthSecret --value ${RA_IAK}
- ejbca.sh config cmp updatealias --alias cmpRA --key responseprotection --value pbe
+ ejbca.sh config cmp updatealias --alias cmpRA --key responseprotection --value signature
+ ejbca.sh config cmp updatealias --alias cmpRA --key authenticationmodule --value 'HMAC;EndEntityCertificate'
+ ejbca.sh config cmp updatealias --alias cmpRA --key authenticationparameters --value '-;ManagementCA'
+ ejbca.sh config cmp updatealias --alias cmpRA --key allowautomatickeyupdate --value true
#Custom EJBCA cert profile and endentity are imported to allow issuing certificates with correct extended usage (containing serverAuth)
ejbca.sh ca importprofiles -d /opt/primekey/custom_profiles
#Profile name taken from certprofile filename (certprofile_<profile-name>-<id>.xml)
ejbca.sh config cmp updatealias --alias cmpRA --key ra.certificateprofile --value CUSTOM_ENDUSER
#ID taken from entityprofile filename (entityprofile_<profile-name>-<id>.xml)
ejbca.sh config cmp updatealias --alias cmpRA --key ra.endentityprofileid --value 1356531849
+ caSubject=$(ejbca.sh ca getcacert --caname ManagementCA -f /dev/stdout | grep 'Subject' | sed -e "s/^Subject: //" | sed -n '1p')
+ ejbca.sh config cmp updatealias --alias cmpRA --key defaultca --value "$caSubject"
ejbca.sh config cmp dumpalias --alias cmpRA
ejbca.sh config cmp addalias --alias cmp
ejbca.sh config cmp updatealias --alias cmp --key allowautomatickeyupdate --value true
ejbca.sh config cmp updatealias --alias cmp --key extractusernamecomponent --value CN
ejbca.sh config cmp dumpalias --alias cmp
ejbca.sh ca getcacert --caname ManagementCA -f /dev/stdout > cacert.pem
+ #Add "Certificate Update Admin" role to allow performing KUR/CR for certs within specific organization (e.g. Linux-Foundation)
+ ejbca.sh roles addrole "Certificate Update Admin"
+ ejbca.sh roles changerule "Certificate Update Admin" /ca/ManagementCA/ ACCEPT
+ ejbca.sh roles changerule "Certificate Update Admin" /ca_functionality/create_certificate/ ACCEPT
+ ejbca.sh roles changerule "Certificate Update Admin" /endentityprofilesrules/Custom_EndEntity/ ACCEPT
+ ejbca.sh roles changerule "Certificate Update Admin" /ra_functionality/edit_end_entity/ ACCEPT
+ ejbca.sh roles addrolemember "Certificate Update Admin" ManagementCA WITH_ORGANIZATION --value "{{ .Values.cmpv2Config.global.certificate.default.subject.organization }}"
}
env:
- name: INITIAL_ADMIN
value: ";PublicAccessAuthenticationToken:TRANSPORT_ANY;"
+ - name: NO_CREATE_CA
+ value: "true"
- name: DATABASE_JDBC_URL
value: jdbc:mariadb://{{ include "common.mariadbService" . }}:{{ include "common.mariadbPort" . }}/{{ .Values.mysqlDatabase }}
- name: DATABASE_USER
.project
.idea/
*.tmproj
-components/
+components/
\ No newline at end of file
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP Configuration Persistance Service (CPS) - Temporal
+name: cps-temporal
+version: 8.0.0
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+dependencies:
+ - name: common
+ version: ~8.x-0
+ repository: '@local'
+ - name: repositoryGenerator
+ version: ~8.x-0
+ repository: '@local'
+ - name: timescaledb
+ version: ~8.x-0
+ repository: '@local'
+ - name: readinessCheck
+ version: ~8.x-0
+ repository: '@local'
+ - name: serviceAccount
+ version: ~8.x-0
+ repository: '@local'
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+spring:
+ datasource:
+ url: jdbc:postgresql://{{ .Values.timescaledb.service.name }}:5432/{{ .Values.timescaledb.config.pgDatabase }}
+ username: ${DB_USERNAME}
+ password: ${DB_PASSWORD}
+ kafka:
+ bootstrap-servers: [{{ .Values.config.kafka.service }}:{{ .Values.config.kafka.port }}]
+ security:
+ protocol: {{ .Values.config.kafka.protocol }}
+ consumer:
+ group-id: {{ .Values.config.kafka.consumerGroupId }}
+
+security:
+ auth:
+ username: ${APP_USERNAME}
+ password: ${APP_PASSWORD}
+
+app:
+ listener:
+ data-updated:
+ topic: {{ .Values.config.kafka.listenerTopic }}
+
+{{- if .Values.config.additional }}
+{{ toYaml .Values.config.additional | nindent 2 }}
+{{- end }}
+
+# Last empty line is required otherwise the last property will be missing from application.yml file in the pod.
--- /dev/null
+<!--
+ ============LICENSE_START=======================================================
+ Copyright (C) 2020 Bell Canada.
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ SPDX-License-Identifier: Apache-2.0
+ ============LICENSE_END=========================================================
+-->
+
+<configuration>
+
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder>
+ <pattern>%d - %highlight(%-5level) [%-20.20thread] %cyan(%logger{36}) - %msg%n</pattern>
+ </encoder>
+ </appender>
+
+ <!-- Logger for cps classes -->
+ <logger name="org.onap.cps" level="info"/>
+
+ <!-- Logger for sql statements. Set to info to disable, debug to enable -->
+ <logger name="org.hibernate.SQL" level="info"/>
+
+ <!-- Logger for sql bindings. Set to info to disable, to trace to enable -->
+ <logger name="org.hibernate.type.descriptor.sql.BasicBinder" level="info"/>
+
+ <!-- Logger for hibernate statistics. Set to warn to disable, to info to enable -->
+ <logger name="org.hibernate.engine.internal.StatisticalLoggingSessionEventListener" level="warn"/>
+
+ <root level="info">
+ <appender-ref ref="STDOUT" />
+ </root>
+
+</configuration>
\ No newline at end of file
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
+data: {{ tpl (.Files.Glob "resources/config/*").AsConfig . | nindent 2 }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ minReadySeconds: {{ index .Values.minReadySeconds }}
+ strategy:
+ type: {{ index .Values.updateStrategy.type }}
+ rollingUpdate:
+ maxUnavailable: {{ index .Values.updateStrategy.maxUnavailable }}
+ maxSurge: {{ index .Values.updateStrategy.maxSurge }}
+ selector: {{- include "common.selectors" . | nindent 4 }}
+ template:
+ metadata: {{- include "common.templateMetadata" . | nindent 6 }}
+ spec:
+ {{ include "common.podSecurityContext" . | indent 6 | trim}}
+ serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . ) }}
+ initContainers: {{ include "common.readinessCheck.waitFor" . | nindent 6 }}
+ - name: {{ include "common.name" . }}-update-config
+ image: {{ include "repositoryGenerator.image.envsubst" . }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - sh
+ args:
+ - -c
+ - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config/${PFILE}; done"
+ env:
+ - name: DB_USERNAME
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "pg-user-creds" "key" "login") | indent 12 }}
+ - name: DB_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "pg-user-creds" "key" "password") | indent 12 }}
+ - name: APP_USERNAME
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "app-user-creds" "key" "login") | indent 12 }}
+ - name: APP_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "app-user-creds" "key" "password") | indent 12 }}
+ volumeMounts:
+ - mountPath: /config-input
+ name: init-data-input
+ - mountPath: /config
+ name: init-data
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports: {{ include "common.containerPorts" . | nindent 10 }}
+ {{ include "common.containerSecurityContext" . | indent 8 | trim }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ httpGet:
+ port: {{ .Values.liveness.port }}
+ path: {{ .Values.liveness.path }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ httpGet:
+ port: {{ .Values.readiness.port }}
+ path: {{ .Values.readiness.path }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: SPRING_PROFILES_ACTIVE
+ value: {{ .Values.config.spring.profile }}
+ resources: {{ include "common.resources" . | nindent 10 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector: {{ toYaml .Values.nodeSelector | nindent 12 }}
+ {{- end }}
+ {{- if .Values.affinity }}
+ affinity: {{ toYaml .Values.affinity | nindent 12 }}
+ {{- end }}
+ volumeMounts:
+ - mountPath: /app/resources/application-helm.yml
+ subPath: application-helm.yml
+ name: init-data
+ - mountPath: /app/resources/logback.xml
+ subPath: logback.xml
+ name: init-data
+ - mountPath: /tmp
+ name: init-temp
+ volumes:
+ - name: init-data-input
+ configMap:
+ name: {{ include "common.fullname" . }}
+ - name: init-data
+ emptyDir:
+ medium: Memory
+ - name: init-temp
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "common.ingress" . }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "common.secretFast" . }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "common.service" . }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+{{- if .Values.prometheus.enabled }}
+{{ include "common.serviceMonitor" . }}
+{{- end }}
\ No newline at end of file
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (c) 2021 Bell Canada.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+passwordStrengthOverride: basic
+global:
+ ingress:
+ virtualhost:
+ baseurl: "simpledemo.temporal.onap.org"
+
+secrets:
+ - uid: pg-user-creds
+ name: &pgUserCredsSecretName '{{ include "common.release" . }}-cps-temporal-pg-user-creds'
+ type: basicAuth
+ externalSecret: '{{ ternary "" (tpl (default "" .Values.timescaledb.config.pgUserExternalSecret) .) (hasSuffix "cps-temporal-pg-user-creds" .Values.timescaledb.config.pgUserExternalSecret) }}'
+ login: '{{ .Values.timescaledb.config.pgUserName }}'
+ password: '{{ .Values.timescaledb.config.pgUserPassword }}'
+ passwordPolicy: generate
+ - uid: app-user-creds
+ type: basicAuth
+ externalSecret: '{{ tpl (default "" .Values.config.appUserExternalSecret) . }}'
+ login: '{{ .Values.config.appUserName }}'
+ password: '{{ .Values.config.appUserPassword }}'
+ passwordPolicy: generate
+
+image: onap/cps-temporal:1.0.0
+containerPort: &svc_port 8080
+managementPort: &mgt_port 8081
+
+prometheus:
+ enabled: true
+
+service:
+ type: ClusterIP
+ name: cps-temporal
+ ports:
+ - name: http
+ port: *svc_port
+ targetPort: *svc_port
+ - name: management
+ port: *mgt_port
+ targetPort: *mgt_port
+
+metrics:
+ serviceMonitor:
+ enabled: true
+ port: management
+ ## specify target port if name is not given to the port in the service definition
+ ##
+ # targetPort: 8080
+ path: /manage/prometheus
+ interval: 60s
+ basicAuth:
+ enabled: false
+
+pullPolicy: IfNotPresent
+# flag to enable debugging - application support required
+debugEnabled: false
+nodeSelector: {}
+affinity: {}
+# Resource Limit flavor -By Default using small
+flavor: small
+# default number of instances
+replicaCount: 1
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 2Gi
+ unlimited: {}
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 20
+ periodSeconds: 20
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+ path: /manage/health
+ port: *mgt_port
+
+readiness:
+ initialDelaySeconds: 15
+ periodSeconds: 15
+ path: /manage/health
+ port: *mgt_port
+
+ingress:
+ enabled: true
+ service:
+ - baseaddr: "cps-temporal"
+ path: "/"
+ name: "cps-temporal"
+ port: *svc_port
+
+serviceAccount:
+ nameOverride: cps-temporal
+ roles:
+ - read
+
+securityContext:
+ user_id: 100
+ group_id: 655533
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+config:
+ # REST API basic authentication credentials (passsword is generated if not provided)
+ appUserName: cpstemporal
+ spring:
+ profile: helm
+ #appUserPassword:
+
+# Any new property can be added in the env by setting in overrides in the format mentioned below
+# All the added properties must be in "key: value" format instead of yaml.
+# additional:
+# spring.config.max-size: 200
+# spring.config.min-size: 10
+
+ kafka:
+ service: message-router-kafka
+ port: 9092
+ listenerTopic: cps.cfg-state-events
+ consumerGroupId: cps-temporal-group
+ protocol: PLAINTEXT
+
+logging:
+ level: INFO
+ path: /tmp
+
+timescaledb:
+ nameOverride: cps-temporal-db
+ container:
+ name: cps-temporal-db
+ name: cpstemporaldb
+ service:
+ name: cps-temporal-db
+ persistence:
+ mountSubPath: cps-temporal/data
+ mountInitPath: cps-temporal
+ config:
+ pgUserName: cpstemporaldb
+ pgDatabase: cpstemporaldb
+ pgUserExternalSecret: *pgUserCredsSecretName
+ serviceAccount:
+ nameOverride: cps-temporal-db
+
+readinessCheck:
+ wait_for:
+ - cps-temporal-db
+
+minReadySeconds: 10
+updateStrategy:
+ type: RollingUpdate
+ maxUnavailable: 0
+ maxSurge: 1
\ No newline at end of file
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+components/
\ No newline at end of file
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP Configuration Persistance Service (CPS) - NCMP-DMI-Plugin
+name: ncmp-dmi-plugin
+version: 8.0.0
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
dependencies:
- name: common
version: ~8.x-0
- # local reference to common chart, as it is
- # a part of this chart's package and will not
- # be published independently to a repo (at this point)
+ repository: '@local'
+ - name: readinessCheck
+ version: ~8.x-0
repository: '@local'
- name: repositoryGenerator
version: ~8.x-0
repository: '@local'
+ - name: serviceAccount
+ version: ~8.x-0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+server:
+ port: 8080
+
+cps-core:
+ baseUrl: http://${CPS_CORE_HOST:cps}:${CPS_CORE_PORT:8080}
+ dmiRegistrationUrl : /cps-ncmp/api/ncmp-dmi/v1/ch
+ auth:
+ username: ${CPS_CORE_USERNAME}
+ password: ${CPS_CORE_PASSWORD}
+
+sdnc:
+ baseUrl: http://${SDNC_HOST:sdnc}:${SDNC_PORT:8181}
+ topologyId: ${SDNC_TOPOLOGY_ID:topology-netconf}
+ auth:
+ username: ${SDNC_USERNAME}
+ password: ${SDNC_PASSWORD}
+
+security:
+ # comma-separated uri patterns which do not require authorization
+ permit-uri: /manage/**,/swagger-ui/**,/swagger-resources/**,/v3/api-docs
+ auth:
+ username: ${DMI_PLUGIN_USERNAME}
+ password: ${DMI_PLUGIN_PASSWORD}
+
+logging:
+ level:
+ org:
+ springframework: {{ .Values.logging.level }}
+ onap:
+ cps: {{ .Values.logging.cps }}
+
+
+{{- if .Values.config.additional }}
+{{ toYaml .Values.config.additional | nindent 2 }}
+{{- end }}
+
+# Last empty line is required otherwise the last property will be missing from application.yml file in the pod.
--- /dev/null
+<!--
+ ============LICENSE_START=======================================================
+ Copyright (C) 2021 Nordix Foundation
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ SPDX-License-Identifier: Apache-2.0
+ ============LICENSE_END=========================================================
+-->
+
+<configuration scan="true" scanPeriod="30 seconds" debug="false">
+
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder>
+ <pattern>%d - %highlight(%-5level) [%-20.20thread] %cyan(%logger{36}) - %msg%n</pattern>
+ </encoder>
+ </appender>
+ <appender name="AsyncSysOut" class="ch.qos.logback.classic.AsyncAppender">
+ <appender-ref ref="STDOUT" />
+ </appender>
+
+ <root level="INFO">
+ <appender-ref ref="AsyncSysOut" />
+ </root>
+
+</configuration>
+
-# Copyright © 2018 Amdocs, Bell Canada
-#
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
http://{{ . }}
{{- end }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ export SERVICE_PORT=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.spec.ports[0].port}')
+ echo http://$SERVICE_IP:$SERVICE_PORT
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ export POD_PORT=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].spec.containers[0].ports[0].containerPort}")
echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+ kubectl port-forward $POD_NAME 8080:$POD_PORT
{{- end }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
+data: {{ tpl (.Files.Glob "resources/config/*").AsConfig . | nindent 2 }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ selector: {{- include "common.selectors" . | nindent 4 }}
+ template:
+ metadata:
+ labels:
+ app.kubernetes.io/name: {{ include "common.name" . }}
+ app.kubernetes.io/instance: {{ include "common.release" . }}
+ {{- if .Values.prometheus.enabled }}
+ annotations:
+ prometheus.io/scrape: "true"
+ prometheus.io/path: 'manage/prometheus'
+ prometheus.io/port: {{ .Values.managementPort | quote }}
+ {{- end }}
+ spec:
+ {{ include "common.podSecurityContext" . | indent 6 | trim}}
+ serviceAccountName: {{ include "common.fullname" (dict "suffix" "read" "dot" . ) }}
+ initContainers: {{ include "common.readinessCheck.waitFor" . | nindent 6 }}
+ - name: {{ include "common.name" . }}-update-config
+ image: {{ include "repositoryGenerator.image.envsubst" . }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - sh
+ args:
+ - -c
+ - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config/${PFILE}; done"
+ env:
+ - name: DMI_PLUGIN_USERNAME
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "user-creds" "key" "login") | indent 12 }}
+ - name: DMI_PLUGIN_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "user-creds" "key" "password") | indent 12 }}
+ - name: SDNC_USERNAME
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "sdnc-creds" "key" "login") | indent 12 }}
+ - name: SDNC_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "sdnc-creds" "key" "password") | indent 12 }}
+ - name: CPS_CORE_USERNAME
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "core-creds" "key" "login") | indent 12 }}
+ - name: CPS_CORE_PASSWORD
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "core-creds" "key" "password") | indent 12 }}
+ volumeMounts:
+ - mountPath: /config-input
+ name: init-data-input
+ - mountPath: /config
+ name: init-data
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports: {{ include "common.containerPorts" . | nindent 10 }}
+ {{ include "common.containerSecurityContext" . | indent 8 | trim }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ httpGet:
+ port: {{ .Values.liveness.port }}
+ path: {{ .Values.liveness.path }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ httpGet:
+ port: {{ .Values.readiness.port }}
+ path: {{ .Values.readiness.path }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: SPRING_PROFILES_ACTIVE
+ value: {{ .Values.config.spring.profile }}
+ resources: {{ include "common.resources" . | nindent 10 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector: {{ toYaml .Values.nodeSelector | nindent 12 }}
+ {{- end }}
+ {{- if .Values.affinity }}
+ affinity: {{ toYaml .Values.affinity | nindent 12 }}
+ {{- end }}
+ volumeMounts:
+ - mountPath: /app/resources/application-helm.yml
+ subPath: application-helm.yml
+ name: init-data
+ - mountPath: /app/resources/logback.xml
+ subPath: logback.xml
+ name: init-data
+ - mountPath: /tmp
+ name: init-temp
+ volumes:
+ - name: init-data-input
+ configMap:
+ name: {{ include "common.fullname" . }}
+ - name: init-data
+ emptyDir:
+ medium: Memory
+ - name: init-temp
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
-apiVersion: v1
-description: ONAP External System Register GUI
-name: esr-gui
-version: 8.0.0
+{{ include "common.ingress" . }}
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "common.secretFast" . }}
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
-apiVersion: v1
-description: ONAP External System Register
-name: esr
-version: 8.0.0
+{{ include "common.service" . }}
--- /dev/null
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Secrets.
+#################################################################
+secrets:
+ - uid: user-creds
+ type: basicAuth
+ externalSecret: '{{ tpl (default "" .Values.config.appUserExternalSecret) . }}'
+ login: '{{ .Values.config.appUserName }}'
+ password: '{{ .Values.config.appUserPassword }}'
+ passwordPolicy: generate
+ - uid: sdnc-creds
+ type: basicAuth
+ externalSecret: '{{ tpl (default "" .Values.config.odlCredsExternalSecret) . }}'
+ login: '{{ .Values.config.sdncUser }}'
+ password: '{{ .Values.config.sdncPassword }}'
+ passwordPolicy: required
+ - uid: core-creds
+ type: basicAuth
+ externalSecret: '{{ tpl (default "" .Values.config.coreCredsExternalSecret) . }}'
+ login: '{{ .Values.config.coreUser }}'
+ password: '{{ .Values.config.corePassword }}'
+ passwordPolicy: generate
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ ingress:
+ virtualhost:
+ baseurl: "simpledemo.onap.org"
+
+image: onap/ncmp-dmi-plugin:1.0.0
+containerPort: &svc_port 8080
+managementPort: &mgt_port 8081
+
+prometheus:
+ enabled: true
+ interval: 60s
+
+service:
+ type: ClusterIP
+ name: ncmp-dmi-plugin
+ ports:
+ - name: &port http
+ port: *svc_port
+ - name: management
+ port: *mgt_port
+ targetPort: *mgt_port
+
+pullPolicy: IfNotPresent
+# flag to enable debugging - application support required
+debugEnabled: false
+nodeSelector: {}
+affinity: {}
+# Resource Limit flavor -By Default using small
+flavor: small
+# default number of instances
+replicaCount: 1
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 4Gi
+ requests:
+ cpu: 2
+ memory: 2Gi
+ unlimited: {}
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 20
+ periodSeconds: 20
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+ path: /manage/health
+ port: *mgt_port
+
+readiness:
+ initialDelaySeconds: 15
+ periodSeconds: 15
+ path: /manage/health
+ port: *mgt_port
+
+ingress:
+ enabled: true
+ service:
+ - baseaddr: "ncmp-dmi-plugin"
+ path: "/"
+ name: "ncmp-dmi-plugin"
+ port: *svc_port
+
+serviceAccount:
+ nameOverride: ncmp-dmi-plugin
+ roles:
+ - read
+
+securityContext:
+ user_id: 100
+ group_id: 655533
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+config:
+
+ # REST API basic authentication credentials (passsword is generated if not provided)
+ appUserName: ncmpuser
+ spring:
+ profile: helm
+ #appUserPassword:
+
+ sdncUser: admin
+ sdncPassword: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
+
+ coreUser: cpsuser
+
+# Any new property can be added in the env by setting in overrides in the format mentioned below
+# All the added properties must be in "key: value" format insead of yaml.
+# additional:
+# spring.config.max-size: 200
+# spring.config.min-size: 10
+
+logging:
+ level: INFO
+ cps: DEBUG
+ path: /tmp
+
+readinessCheck:
+ wait_for:
+ - cps-postgres
- name: cps-core
version: ~8.x-0
repository: '@local'
- condition: cps-core.enabled
\ No newline at end of file
+ condition: cps-core.enabled
+ - name: cps-temporal
+ version: ~8.x-0
+ repository: '@local'
+ condition: cps-temporal.enabled
+ - name: ncmp-dmi-plugin
+ version: ~8.x-0
+ repository: '@local'
+ condition: ncmp-dmi-plugin.enabled
\ No newline at end of file
--- /dev/null
+{{/*
+# ============LICENSE_START=======================================================
+# Copyright (C) 2021 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "common.secretFast" . }}
#################################################################
# Global configuration defaults.
#################################################################
+secrets:
+ - uid: core-app-user-creds
+ name: &core-creds-secret '{{ include "common.release" . }}-cps-core-app-user-creds'
+ type: basicAuth
+ externalSecret: '{{ tpl (default "" .Values.config.coreUserExternalSecret) . }}'
+ login: '{{ .Values.config.coreUserName }}'
+ password: '{{ .Values.config.coreUserPassword }}'
+ passwordPolicy: generate
+
passwordStrengthOverride: basic
global:
ingress:
virtualhost:
baseurl: "simpledemo.onap.org"
-config: {}
+config:
+ coreUserName: cpsuser
# Enable all CPS components by default
cps-core:
enabled: true
+ config:
+ appUserExternalSecret: *core-creds-secret
+
+cps-temporal:
+ enabled: true
+
+ncmp-dmi-plugin:
+ enabled: true
+ config:
+ coreCredsExternalSecret: *core-creds-secret
- name: dcae-config-delete
image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.consulLoaderImage }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /opt/app/delete_key.sh
args:
- - --delete-key
- {{ include "common.name" . }}
{{ end -}}
.PHONY: $(EXCLUDES) $(HELM_CHARTS)
-all: $(HELM_CHARTS)
+all: $(HELM_CHARTS) helm-repo-update
$(HELM_CHARTS):
@echo "\n[$@]"
@rm -f */requirements.lock
@rm -f *tgz */charts/*tgz
@rm -rf $(PACKAGE_DIR)
+
+helm-repo-update:
+ifeq "$(findstring v3,$(HELM_VER))" "v3"
+ @$(HELM_BIN) repo update
+endif
+
%:
@:
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
-certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.3.3
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
+certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.4.0
#################################################################
# Application Configuration Defaults.
#################################################################
# Application Image
-image: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.6.0
+image: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.6.1
pullPolicy: Always
# Log directory where logging sidecar should look for log files
plain_port: 8100
port_protocol: http
+# Environment variables
+applicationEnv:
+# Empty path forces DFC to use Consul configuration, which allows app runtime reconfiguration.
+# It's a workaround because DMAAP specific env variables are not available in main container.
+ CBS_CLIENT_CONFIG_PATH: ''
+
# Initial Application Configuration
applicationConfig:
dmaap.certificateConfig.keyCert: /opt/app/datafile/etc/cert/cert.p12
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# initContainer images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
-certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.3.3
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
+certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.4.0
#################################################################
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.9.0
+image: onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.9.1
pullPolicy: Always
# log directory where logging sidecar should look for log files
applicationEnv:
JAVA_OPTS: '-Dlogback.configurationFile=/etc/ONAP/dcae-hv-ves-collector/logback.xml'
+ CBS_CLIENT_CONFIG_PATH: '/app-config-input/application_config.yaml'
# Resource Limit flavor -By Default using small
flavor: small
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
#################################################################
# Application Image
-image: onap/org.onap.dcaegen2.services.pm-mapper:1.7.0
+image: onap/org.onap.dcaegen2.services.pm-mapper:1.7.1
pullPolicy: Always
# Log directory where logging sidecar should look for log files
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# initContainer images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.dcaegen2.services.prh.prh-app-server:1.7.0
+image: onap/org.onap.dcaegen2.services.prh.prh-app-server:1.7.1
pullPolicy: Always
# log directory where logging sidecar should look for log files
value: "Basic `echo -n ${AAI_USER}:${AAI_PASSWORD} | base64`"
# initial application configuration
-# Configuration used for in-app substitution must be defined as $${undefined}{<parameter>} under applicationConfig
-# inorder to get ${<parameter>} post envsubst (done part of dcae helm service-common templates)
applicationConfig:
dmaap.dmaapConsumerConfiguration.dmaapContentType: "application/json"
dmaap.dmaapConsumerConfiguration.consumerId: "c12"
dmaap_info:
topic_url: http://message-router.onap.svc.cluster.local:3904/events/unauthenticated.VES_PNFREG_OUTPUT
+applicationEnv:
+ CBS_CLIENT_CONFIG_PATH: '/app-config-input/application_config.yaml'
+
# Resource Limit flavor -By Default using small
flavor: small
# Segregation for Different environment (Small and Large)
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# initContainer images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.dcaegen2.analytics.tca-gen2.dcae-analytics-tca-web:1.3.0
+image: onap/org.onap.dcaegen2.analytics.tca-gen2.dcae-analytics-tca-web:1.3.1
pullPolicy: Always
# log directory where logging sidecar should look for log files
tca.aai.generic_vnf_path: aai/v11/network/generic-vnfs/generic-vnf
tca.aai.node_query_path: aai/v11/search/nodes-query
tca.aai.password: ${AAI_PASSWORD}
- tca.aai.url: http://aai
+ tca.aai.url: https://aai:8443
tca.aai.username: ${AAI_USERNAME}
tca.policy: '{"domain":"measurementsForVfScaling","metricsPerEventName":[{"eventName":"vFirewallBroadcastPackets","controlLoopSchemaType":"VM","policyScope":"DCAE","policyName":"DCAE.Config_tca-hi-lo","policyVersion":"v0.0.1","thresholds":[{"closedLoopControlName":"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a","version":"1.0.2","fieldPath":"$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedTotalPacketsDelta","thresholdValue":300,"direction":"LESS_OR_EQUAL","severity":"MAJOR","closedLoopEventStatus":"ONSET"},{"closedLoopControlName":"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a","version":"1.0.2","fieldPath":"$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedTotalPacketsDelta","thresholdValue":700,"direction":"GREATER_OR_EQUAL","severity":"CRITICAL","closedLoopEventStatus":"ONSET"}]},{"eventName":"vLoadBalancer","controlLoopSchemaType":"VM","policyScope":"DCAE","policyName":"DCAE.Config_tca-hi-lo","policyVersion":"v0.0.1","thresholds":[{"closedLoopControlName":"ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3","version":"1.0.2","fieldPath":"$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedTotalPacketsDelta","thresholdValue":300,"direction":"GREATER_OR_EQUAL","severity":"CRITICAL","closedLoopEventStatus":"ONSET"}]},{"eventName":"Measurement_vGMUX","controlLoopSchemaType":"VNF","policyScope":"DCAE","policyName":"DCAE.Config_tca-hi-lo","policyVersion":"v0.0.1","thresholds":[{"closedLoopControlName":"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e","version":"1.0.2","fieldPath":"$.event.measurementsForVfScalingFields.additionalMeasurements[*].arrayOfFields[0].value","thresholdValue":0,"direction":"EQUAL","severity":"MAJOR","closedLoopEventStatus":"ABATED"},{"closedLoopControlName":"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e","version":"1.0.2","fieldPath":"$.event.measurementsForVfScalingFields.additionalMeasurements[*].arrayOfFields[0].value","thresholdValue":0,"direction":"GREATER","severity":"CRITICAL","closedLoopEventStatus":"ONSET"}]}]}'
tca.processing_batch_size: 10000
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# initContainer images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
-certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.3.3
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
+certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.4.0
#################################################################
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.10.0
+image: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.10.1
pullPolicy: Always
# log directory where logging sidecar should look for log files
nodePort: 17
useNodePortExt: true
+# application environments
+applicationEnv:
+ CBS_CLIENT_CONFIG_PATH: '/app-config-input/application_config.yaml'
+
# initial application configuration
applicationConfig:
collector.dmaap.streamid: fault=ves-fault|syslog=ves-syslog|heartbeat=ves-heartbeat|measurement=ves-measurement|measurementsForVfScaling=ves-measurement|mobileFlow=ves-mobileflow|other=ves-other|stateChange=ves-statechange|thresholdCrossingAlert=ves-thresholdCrossingAlert|voiceQuality=ves-voicequality|sipSignaling=ves-sipsignaling|notification=ves-notification|pnfRegistration=ves-pnfRegistration|3GPP-FaultSupervision=ves-3gpp-fault-supervision|3GPP-Heartbeat=ves-3gpp-heartbeat|3GPP-Provisioning=ves-3gpp-provisioning|3GPP-PerformanceAssurance=ves-3gpp-performance-assurance
--- /dev/null
+{{/*
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+{{ include "dcaegen2-services-common.consulDeleteJob" . }}
\ No newline at end of file
# InitContainer Images.
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
-consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Application Configuration Defaults.
#################################################################
# Application Image
-image: onap/org.onap.dcaegen2.services.mapper.vesadapter.universalvesadaptor:1.2.0
+image: onap/org.onap.dcaegen2.services.mapper.vesadapter.universalvesadaptor:1.3.0
pullPolicy: Always
# Log directory where logging sidecar should look for log files
nodePortPrefix: 302
nodePortPrefixExt: 304
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
- consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+ consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
secrets:
- uid: pg-root-pass
disableNfsProvisioner: true
# application image
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:3.3.3
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:3.3.4
default_k8s_location: central
# DCAE component images to be deployed via Cloudify Manager
# Use to override default setting in blueprints
componentImages:
- tcagen2: onap/org.onap.dcaegen2.analytics.tca-gen2.dcae-analytics-tca-web:1.3.0
- ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.10.0
- prh: onap/org.onap.dcaegen2.services.prh.prh-app-server:1.7.0
- hv_ves: onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.9.0
+ tcagen2: onap/org.onap.dcaegen2.analytics.tca-gen2.dcae-analytics-tca-web:1.3.1
+ ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.10.1
+ prh: onap/org.onap.dcaegen2.services.prh.prh-app-server:1.7.1
+ hv_ves: onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.9.1
# Resource Limit flavor -By Default using small
flavor: small
nodePortPrefix: 302
persistence: {}
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
- consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+ consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
repositoryCred:
user: docker
password: docker
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.dcaegen2.deployments.cm-container:4.6.0
+image: onap/org.onap.dcaegen2.deployments.cm-container:4.6.1
pullPolicy: Always
# name of shared ConfigMap with kubeconfig for multiple clusters
global:
nodePortPrefix: 302
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
- consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+ consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
secrets:
- uid: 'cm-pass'
global:
nodePortPrefix: 302
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
- consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+ consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
secrets:
- uid: 'cm-pass'
type: password
global:
nodePortPrefix: 302
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
- consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+ consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.1
#################################################################
# Secrets metaconfig
importCloudify: https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
importK8S: plugin:k8splugin?version=>=3.5.1,<4.0.0
importPostgres: plugin:pgaas?version=1.3.0
- importClamp: plugin:clamppolicyplugin?version=1.1.0
+ importClamp: plugin:clamppolicyplugin?version=1.1.1
importDMaaP: plugin:dmaap?version=>=1.5.1,<2.0.0
useDmaapPlugin: false
bpResourcesCpuLimit: 250m
+++ /dev/null
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- securityContext:
- runAsUser: 1000
- runAsGroup: 1001
- fsGroup: 1001
- initContainers:
- - command:
- - cp
- args:
- - -r
- - -T
- - /home/esr/tomcat
- - /opt/tomcat
- securityContext:
- privileged: true
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: create-tomcat-dir
- volumeMounts:
- - name: tomcat-workdir
- mountPath: /opt/tomcat
-
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- - name: MSB_ADDR
- value: {{ tpl .Values.msbaddr . }}
- volumeMounts:
- - name: tomcat-workdir
- mountPath: /home/esr/tomcat/
- resources:
-{{ include "common.resources" . | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
-
- volumes:
- - name: tomcat-workdir
- emptyDir: {}
-
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ include "common.servicename" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
- msb.onap.org/service-info: '[
- {
- "serviceName": "aai-esr-gui",
- "version": "v1",
- "url": "/esr-gui",
- "protocol": "UI",
- "port": "{{ .Values.service.internalPort }}",
- "visualRange":"1",
- "path":"/iui/aai-esr-gui"
- }
- ]'
-spec:
- ports:
- - port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- persistence: {}
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-image: onap/aai/esr-gui:1.4.0
-pullPolicy: Always
-msbaddr: msb-iag.{{ include "common.namespace" . }}:443
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- name: esr-gui
- internalPort: 8080
-
-ingress:
- enabled: false
-
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+++ /dev/null
-{{/*
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- clean_inactive: 96h
-
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-# Copyright © 2018 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
--->
-
-<configuration scan="{{ .Values.log.scan.enabled }}" debug="{{ .Values.log.debug }}">
-
- <property name="componentName" value='{{default "UNSET_COMPONENT" .Values.log.componentName}}'/>
- <property name="subcomponentName" value='{{default "UNSET_SUBCOMPONENT" .Values.log.subcomponentName}}'/>
-
- <property name="logDir" value="{{ .Values.log.logDir }}" />
- <property name="queueSize" value="{{ .Values.log.queueSize }}"/>
-
- <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
- <property name="p_lvl" value="%level"/>
- <property name="p_log" value="%logger"/>
- <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
- <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
- <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
- <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
- <property name="p_thr" value="%thread"/>
- <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
-
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
-
- <property name="errorPattern" value="${p_tim}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
- <property name="debugPattern" value="${p_tim}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
- <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
- <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
-
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
-
- <!-- Console (human-readable) logging -->
- <property name="consolePattern" value="%nopexception${p_log}\t${p_tim}\t${p_lvl}\t%message\t${p_mdc}\t%rootException\t${p_mak}\t${p_thr}%n"/>
-
- <appender name="EELFAudit"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <encoder>
- <pattern>${auditPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
-
- <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <encoder>
- <pattern>${metricPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics"/>
- </appender>
-
- <appender name="EELFError"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- <encoder>
- <pattern>${errorPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError"/>
- </appender>
-
- <appender name="EELFDebug"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.log.%d</fileNamePattern>
- </rollingPolicy>
- <encoder>
- <pattern>${debugPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
- <encoder>
- <pattern>${consolePattern}</pattern>
- </encoder>
- </appender>
-
- <logger name="com.att.eelf.audit" level="info" additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
-
- <logger name="com.att.eelf.metrics" level="info" additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
-
- <logger name="com.att.eelf.error" level="debug" additivity="false">
- <appender-ref ref="asyncEELFError" />
- </logger>
-
- <root level="{{ .Values.log.root.level }}">
- <appender-ref ref="asyncEELFDebug" />
- <appender-ref ref="STDOUT" />
- </root>
-
-</configuration>
\ No newline at end of file
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- securityContext:
- runAsUser: 1000
- runAsGroup: 1001
- fsGroup: 1001
- initContainers:
- - command:
- - cp
- args:
- - -r
- - -T
- - /home/esr/conf
- - /opt/conf
- securityContext:
- privileged: true
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: create-conf-dir
- volumeMounts:
- - name: conf-dir
- mountPath: /opt/conf
-
- containers:
- - name: {{ .Chart.Name }}
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- - name: MSB_ADDR
- value: {{ tpl .Values.msbaddr . }}
- volumeMounts:
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: /home/esr/works/logs
- name: {{ include "common.fullname" . }}-logs
- - mountPath: /home/esr/conf
- name: conf-dir
- resources:
-{{ include "common.resources" . | indent 12 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 10 }}
- {{- end }}
- # Filebeat sidecar container
- - name: {{ include "common.name" . }}-filebeat-onap
- securityContext:
- runAsUser: 1000
- runAsGroup: 1000
- image: {{ include "repositoryGenerator.image.logging" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- volumeMounts:
- - name: {{ include "common.fullname" . }}-filebeat-conf
- mountPath: /usr/share/filebeat/filebeat.yml
- subPath: filebeat.yml
- - name: {{ include "common.fullname" . }}-data-filebeat
- mountPath: /usr/share/filebeat/data
- - name: {{ include "common.fullname" . }}-logs
- mountPath: /var/log/onap/esr/esr-server
- - mountPath: /opt/ajsc/etc/config/logback.xml
- name: {{ include "common.fullname" . }}-log-conf
- subPath: logback.xml
- volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- - name: {{ include "common.fullname" . }}-log-conf
- configMap:
- name: {{ include "common.fullname" . }}-log
- - name: {{ include "common.fullname" . }}-filebeat-conf
- configMap:
- name: {{ include "common.fullname" . }}-esr-filebeat-configmap
- - name: {{ include "common.fullname" . }}-data-filebeat
- emptyDir: {}
- - name: {{ include "common.fullname" . }}-logs
- emptyDir: {}
- - name: conf-dir
- emptyDir: {}
-
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ include "common.servicename" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
- msb.onap.org/service-info: '[
- {
- "serviceName": "aai-esr-server",
- "version": "v1",
- "url": "/api/aai-esr-server/v1",
- "protocol": "REST",
- "port": "{{.Values.service.internalPort}}",
- "enable_ssl": true,
- "visualRange":"1"
- }
- ]'
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
+++ /dev/null
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
-
-subChartsOnly:
- enabled: true
-
-# application image
-image: onap/aai/esr-server:1.5.2
-pullPolicy: Always
-msbaddr: msb-iag.{{ include "common.namespace" . }}:443
-
-# application configuration
-config:
- logstashServiceName: log-ls
- logstashPort: 5044
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- type: ClusterIP
- name: esr-server
- portName: esr-server
- externalPort: 9518
- internalPort: 9518
-
-ingress:
- enabled: false
-
-log:
- componentName: esr
- subcomponentName: esr-server
- debug: true
- scan:
- enabled: false
- logDir: /var/log/onap
- queueSize: 256
- root:
- level: INFO
-
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
# validate params
if [ -z "$1" ] || [ -z "$2" ]; then
usage
- exit 0
+ exit 1
fi
RELEASE=$1
CHART_URL=$2
- FLAGS=${@:3}
- CHART_REPO="$(echo "$CHART_URL" |cut -d'/' -f1)"
- CHART_NAME="$(echo "$CHART_URL" |cut -d'/' -f2)"
+ FLAGS=$(echo ${@} | sed 's/^ *[^ ]* *[^ ]* *//')
+ CHART_REPO="$(echo "$CHART_URL" | cut -d'/' -f1)"
+ CHART_NAME="$(echo "$CHART_URL" | cut -d'/' -f2)"
if expr "$HELM_VER" : "v3\..*" ; then
CACHE_DIR=~/.local/share/helm/plugins/deploy/cache
else
fi
# determine if set-last-applied flag is enabled
SET_LAST_APPLIED="false"
- if expr"$FLAGS" : ".*--set-last-applied.*" ; then
+ if expr "$FLAGS" : ".*--set-last-applied.*" ; then
FLAGS="$(echo $FLAGS| sed -n 's/--set-last-applied//p')"
SET_LAST_APPLIED="true"
fi
usage
;;
*)
- deploy $1 $2 ${@:3}
+ deploy $1 $2 $(echo ${@} | sed 's/^ *[^ ]* *[^ ]* *//')
;;
esac
done
}
-if [ $# < 1 ]; then
+if [ -z "$1" ]; then
echo "Error: command 'undeploy' requires a release name"
- exit 0
+ exit 1
fi
case "${1:-"help"}" in
usage
;;
*)
- undeploy $1 ${@:2}
+ undeploy $1 $(echo ${@} | sed 's/^ *[^ ]* *//')
;;
esac
# Application configuration defaults.
#################################################################
# application image
-image: onap/holmes/engine-management:1.3.3
+image: onap/holmes/engine-management:9.0.0
consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0
#################################################################
# Application configuration defaults.
#################################################################
# application image
-image: onap/holmes/rule-management:1.3.3
+image: onap/holmes/rule-management:9.0.0
consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0
#################################################################
# If the user is trying to run Consul directly with some arguments, then
# pass them to Consul.
-if [ "${1:0:1}" = '-' ]; then
+if echo "$1" | grep '^-' >/dev/null; then
set -- consul "$@"
fi
version: ~8.x-0
repository: '@local'
condition: dmaap.enabled
- - name: esr
- version: ~8.x-0
- repository: '@local'
- condition: esr.enabled
- name: log
version: ~8.x-0
repository: '@local'
enabled: false
dmaap:
enabled: true
-esr:
- enabled: false
log:
enabled: false
mariadb-galera:
enabled: false
dmaap:
enabled: false
-esr:
- enabled: false
log:
enabled: false
log-logstash:
enabled: false
dmaap:
enabled: false
-esr:
- enabled: false
log:
enabled: false
sniro-emulator:
enabled: false
dmaap:
enabled: true
-esr:
- enabled: false
log:
enabled: false
mariadb-galera:
enabled: false
dmaap:
enabled: true
-esr:
- enabled: true
log:
enabled: true
sniro-emulator:
enabled: true
dmaap:
enabled: true
-esr:
- enabled: true
oof:
enabled: true
msb:
enabled: true
dmaap:
enabled: true
-esr:
- enabled: true
oof:
enabled: true
msb:
enabled: false
holmes:
enabled: false
-esr:
- enabled: false
log:
enabled: false
mariadb-galera:
enabled: false
dmaap:
enabled: false
-esr:
- enabled: false
# Today, "logging" chart that perform the central part of logging must also be
# enabled in order to make it work. So `logging.enabled` must have the same
# value than centralizedLoggingEnabled
description: Path of health check endpoint.
type: string
certEndpoint:
- description: Path of cerfificate signing enpoint.
+ description: Path of cerfificate signing endpoint.
+ type: string
+ updateEndpoint:
+ description: Path of certificate update endpoint.
type: string
caName:
description: Name of the external CA server configured on CertService API side.
url: {{ .Values.cmpv2issuer.url }}
healthEndpoint: {{ .Values.cmpv2issuer.healthcheckEndpoint }}
certEndpoint: {{ .Values.cmpv2issuer.certEndpoint }}
+ updateEndpoint: {{ .Values.cmpv2issuer.updateEndpoint }}
caName: {{ .Values.cmpv2issuer.caName }}
certSecretRef:
name: {{ .Values.cmpv2issuer.certSecretRef.name }}
# Deployment configuration
deployment:
name: oom-certservice-cmpv2issuer
- image: onap/org.onap.oom.platform.cert-service.oom-certservice-k8s-external-provider:2.3.2
+ image: onap/org.onap.oom.platform.cert-service.oom-certservice-k8s-external-provider:2.4.0
proxyImage: gcr.io/kubebuilder/kube-rbac-proxy:v0.4.0
# fol local development use IfNotPresent
pullPolicy: Always
url: https://oom-cert-service:8443
healthcheckEndpoint: actuator/health
certEndpoint: v1/certificate
+ updateEndpoint: v1/certificate-update
caName: RA
certSecretRef:
name: oom-cert-service-client-tls-secret
{
"caName": "CLIENT",
"url": "http://ejbca:8080/ejbca/publicweb/cmp/cmp",
- "issuerDN": "CN=ManagementCA",
+ "issuerDN": "O=EJBCA Container Quickstart,CN=ManagementCA,UID=12345",
"caMode": "CLIENT",
"authentication": {
"iak": "${CLIENT_IAK}",
{
"caName": "RA",
"url": "http://ejbca:8080/ejbca/publicweb/cmp/cmpRA",
- "issuerDN": "CN=ManagementCA",
+ "issuerDN": "O=EJBCA Container Quickstart,CN=ManagementCA,UID=12345",
"caMode": "RA",
"authentication": {
"iak": "${RA_IAK}",
}
}
]
-}
\ No newline at end of file
+}
# Deployment configuration
repository: "nexus3.onap.org:10001"
-image: onap/org.onap.oom.platform.cert-service.oom-certservice-api:2.3.3
+image: onap/org.onap.oom.platform.cert-service.oom-certservice-api:2.4.0
pullPolicy: Always
replicaCount: 1
"$@" --skip-networking --socket="${SOCKET}" &
mysql_note "Waiting for server startup"
local i
- for i in {30..0}; do
+ for i in $(seq 30 -1 0); do
# only use the root password if the database has already been initializaed
# so that it won't try to fill in a password file when it hasn't been set yet
extraArgs=""
installArgs=${installArgs}" --auth-root-authentication-method=normal"
fi
# "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here)
- mysql_install_db ${installArgs} "${@:2}"
+ mysql_install_db ${installArgs} "$(echo ${@} | sed 's/^ *[^ ]* *//')"
mysql_note "Database files initialized"
}
if [ -n "$MYSQL_DATABASE" ]; then
mysql_note "Giving user ${MYSQL_USER} access to schema ${MYSQL_DATABASE}"
- echo "GRANT ALL ON \`${MYSQL_DATABASE//_/\\_}\`.* TO '$MYSQL_USER'@'%' ;" |docker_process_sql --database=mysql
+ echo "GRANT ALL ON \`$(echo $MYSQL_DATABASE | sed 's@_@\\_@g')\`.* TO '$MYSQL_USER'@'%' ;" | docker_process_sql --database=mysql
fi
- echo "FLUSH PRIVILEGES ;" |docker_process_sql --database=mysql
+ echo "FLUSH PRIVILEGES ;" | docker_process_sql --database=mysql
fi
}
_main() {
# if command starts with an option, prepend mysqld
- if [ "${1:0:1}" = '-' ]; then
+ if echo "$1" | grep '^-' >/dev/null; then
set -- mysqld "$@"
fi
GLOBAL_AAF_PASSWORD = '{{ .Values.aafPassword }}'
GLOBAL_AAF_AUTHENTICATION = [GLOBAL_AAF_USERNAME, GLOBAL_AAF_PASSWORD]
# aai info - everything is from the private oam network (also called onap private network)
-GLOBAL_AAI_SERVER_PROTOCOL = "https"
-GLOBAL_AAI_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "aai" "port" 8443) }}'
+GLOBAL_AAI_SERVER_PROTOCOL = '{{ include "common.scheme" . }}'
+GLOBAL_AAI_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "aai" "port" ( ternary 8443 80 (eq "true" (include "common.needTLS" . )))) }}'
GLOBAL_AAI_USERNAME = '{{ .Values.aaiUsername }}'
GLOBAL_AAI_PASSWORD = '{{ .Values.aaiPassword}}'
GLOBAL_AAI_AUTHENTICATION = [GLOBAL_AAI_USERNAME, GLOBAL_AAI_PASSWORD]
}
copy_server_certs_to_hvves () {
- for f in {ca.p12,server.p12}
+ for f in ca.p12 server.p12
do
kubectl cp $1/$f $2/$3:$4
done
}
copy_client_certs_to_robot () {
- for f in {ca.pem,client.key,client.pem}
+ for f in ca.pem client.key client.pem
do
kubectl cp $1/$f $2/$3:$4
done
}
cleanup () {
- rm -f $1/{ca,server,client}.???
+ rm -f $1/ca.??? $1/server.??? s$1/client.???
}
# application image
repository: nexus3.onap.org:10001
-image: onap/usecase-ui-server:4.0.1
+image: onap/usecase-ui-server:4.0.3
pullPolicy: Always
# application configuration
flavor: small
# application image
-image: onap/usecase-ui:4.0.1
+image: onap/usecase-ui:4.0.3
pullPolicy: Always
# application configuration
Code Review / oom.git / commitdiff