kubernetes/sdnc/resources/config/bin/startODL.oom.sh

   1 #!/bin/bash
   2 {{/*
   3
   4 ###
   5 # ============LICENSE_START=======================================================
   6 # SDNC
   7 # ================================================================================
   8 # Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
   9 # ================================================================================
  10 # Update by Copyright (C) 2020 highstreet technologies GmbH. All rights reserved.
  11 # ================================================================================
  12 # Licensed under the Apache License, Version 2.0 (the "License");
  13 # you may not use this file except in compliance with the License.
  14 # You may obtain a copy of the License at
  15 #
  16 #      http://www.apache.org/licenses/LICENSE-2.0
  17 #
  18 # Unless required by applicable law or agreed to in writing, software
  19 # distributed under the License is distributed on an "AS IS" BASIS,
  20 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  21 # See the License for the specific language governing permissions and
  22 # limitations under the License.
  23 # ============LICENSE_END=========================================================
  24 ###
  25
  26 # Install SDN-C platform components if not already installed and start container
  27
  28 # List of used constants, that are provided during container initialization
  29 */}}
  30
  31 ODL_HOME=${ODL_HOME:-/opt/opendaylight/current}
  32 ODL_FEATURES_BOOT_FILE=$ODL_HOME/etc/org.apache.karaf.features.cfg
  33 #
  34 ODL_REMOVEIDMDB=${ODL_REMOVEIDMDB:-false}
  35
  36 #ODL_CERT_DIR
  37 ODL_ADMIN_USERNAME=${ODL_ADMIN_USERNAME:-admin}
  38 if $ODL_REMOVEIDMDB ; then
  39    echo "Remove odl idmdb"
  40    rm $ODL_HOME/data/idmlight.db.mv.db
  41    ODL_ADMIN_PASSWORD=${ODL_ADMIN_PASSWORD:-admin}
  42 else
  43    ODL_ADMIN_PASSWORD=${ODL_ADMIN_PASSWORD:-Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U}
  44 fi
  45
  46 export ODL_ADMIN_PASSWORD ODL_ADMIN_USERNAME
  47
  48 SDNC_HOME=${SDNC_HOME:-/opt/onap/sdnc}
  49 SDNC_BIN=${SDNC_BIN:-/opt/onap/sdnc/bin}
  50 CCSDK_HOME=${CCSDK_HOME:-/opt/onap/ccsdk}
  51
  52 #- ODL Cluster
  53 ENABLE_ODL_CLUSTER=${ENABLE_ODL_CLUSTER:-false}
  54 #SDNC_REPLICAS
  55
  56 #- ODL GEO cluster
  57 GEO_ENABLED=${GEO_ENABLED:-false}
  58 #IS_PRIMARY_CLUSTER
  59 #MY_ODL_CLUSTER
  60 #PEER_ODL_CLUSTER
  61
  62 #- AAF
  63 SDNC_AAF_ENABLED=${SDNC_AAF_ENABLED:-false}
  64
  65 #- SDN-R
  66 SDNRWT=${SDNRWT:-false}
  67 SDNRWT_BOOTFEATURES=${SDNRWT_BOOTFEATURES:-sdnr-wt-feature-aggregator}
  68 SDNRDM=${SDNRDM:-false}
  69 # Add devicemanager base and specific repositories
  70 SDNRDM_BASE_REPO=${SDNRDM_BASE_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-feature-aggregator-devicemanager-base/$CCSDKFEATUREVERSION/xml/features}
  71 SDNRDM_ONF_REPO=${SDNRDM_ONF_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-onf-feature/$CCSDKFEATUREVERSION/xml/features}
  72 SDNRDM_ORAN_REPO=${SDNRDM_ORAN_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-oran-feature/$CCSDKFEATUREVERSION/xml/features}
  73 SDNRDM_GRAN_REPO=${SDNRDM_GRAN_REPO:-mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-gran-feature/$CCSDKFEATUREVERSION/xml/features}
  74 # Add devicemanager features
  75 SDNRDM_SDM_LIST=${SDNRDM_SDM_LIST:-sdnr-wt-devicemanager-onf-feature, sdnr-wt-devicemanager-oran-feature, sdnr-wt-devicemanager-gran-feature}
  76 SDNRDM_BOOTFEATURES=${SDNRDM_BOOTFEATURES:-sdnr-wt-feature-aggregator-devicemanager-base, ${SDNRDM_SDM_LIST}}
  77 SDNRINIT=${SDNRINIT:-false}
  78 SDNRONLY=${SDNRONLY:-false}
  79 SDNRDBURL=${SDNRDBURL:-http://sdnrdb:9200}
  80 #SDNRDBUSERNAME
  81 #SDNRDBPASSWORD
  82 #SDNRDBPARAMETER
  83 SDNRDBCOMMAND=${SDNRDBCOMMAND:--c init -db $SDNRDBURL -dbu $SDNRDBUSERNAME -dbp $SDNRDBPASSWORD $SDNRDBPARAMETER}
  84
  85 SDNR_NORTHBOUND=${SDNR_NORTHBOUND:-false}
  86 SDNR_NORTHBOUND_BOOTFEATURES=${SDNR_NORTHBOUND_BOOTFEATURES:-sdnr-northbound-all}
  87
  88 # Functions
  89
  90 # Test if repository exists, like this mvn:org.onap.ccsdk.features.sdnr.wt/sdnr-wt-devicemanager-oran-feature/0.7.2/xml/features
  91 # $1 repository
  92 function isRepoExisting() {
  93   REPO=$(echo $1 | sed -E "s#mvn:(.*)/xml/features\$#\1#")
  94   OIFS="$IFS"
  95   IFS='/' parts=($REPO)
  96   IFS="$OIFS"
  97   path="$ODL_HOME/system/"${parts[0]//./\/}"/"${parts[1]}"/"${parts[2]}
  98   [ -d "$path" ]
  99 }
 100
 101 # Add features repository to karaf featuresRepositories configuration
 102 # $1 repositories to be added
 103 function addRepository() {
 104   CFG=$ODL_FEATURES_BOOT_FILE
 105   ORIG=$CFG.orig
 106   if isRepoExisting "$1" ; then
 107     echo "Add repository: $1"
 108     sed -i "\|featuresRepositories|s|$|, $1|" $CFG
 109   else
 110     echo "Repo does not exist: $1"
 111   fi
 112 }
 113
 114 # Append features to karaf boot feature configuration
 115 # $1 additional feature to be added
 116 # $2 repositories to be added (optional)
 117 function addToFeatureBoot() {
 118   CFG=$ODL_FEATURES_BOOT_FILE
 119   ORIG=$CFG.orig
 120   if [ -n "$2" ] ; then
 121     addRepository $2
 122   fi
 123   echo "Add boot feature: $1"
 124   sed -i "\|featuresBoot *=|s|$|,$1|" $CFG
 125 }
 126
 127 # Append features to karaf boot feature configuration
 128 # $1 search pattern
 129 # $2 replacement
 130 function replaceFeatureBoot() {
 131   CFG=$ODL_FEATURES_BOOT_FILE
 132   echo "Replace boot feature $1 with: $2"
 133   sed -i "/featuresBoot/ s/$1/$2/g" $CFG
 134 }
 135
 136 # Remove all sdnc specific features
 137 function cleanupFeatureBoot() {
 138   echo "Remove northbound bootfeatures "
 139   sed -i "/featuresBoot/ s/,ccsdk-sli-core-all.*$//g" $ODL_FEATURES_BOOT_FILE
 140 }
 141
 142 function initialize_sdnr() {
 143   echo "SDN-R Database Initialization"
 144   INITCMD="$JAVA_HOME/bin/java -jar "
 145   INITCMD+="$ODL_HOME/system/org/onap/ccsdk/features/sdnr/wt/sdnr-wt-data-provider-setup/$CCSDKFEATUREVERSION/sdnr-dmt.jar "
 146   INITCMD+="$SDNRDBCOMMAND"
 147   echo "Execute: $INITCMD"
 148   n=0
 149   until [ $n -ge 5 ] ; do
 150     $INITCMD && break
 151     n=$[$n+1]
 152     sleep 15
 153   done
 154   return $?
 155 }
 156
 157 function install_sdnrwt_features() {
 158   # Repository setup provided via sdnc dockerfile
 159   if $SDNRWT; then
 160     addRepository $SDNRDM_BASE_REPO
 161     addRepository $SDNRDM_ONF_REPO
 162     addRepository $SDNRDM_ORAN_REPO
 163     addRepository $SDNRDM_GRAN_REPO
 164
 165     if $SDNRONLY; then
 166       cleanupFeatureBoot
 167     fi
 168     if $SDNRDM; then
 169       addToFeatureBoot "$SDNRDM_BOOTFEATURES"
 170     else
 171       addToFeatureBoot "$SDNRWT_BOOTFEATURES"
 172     fi
 173   fi
 174 }
 175
 176
 177 function install_sdnr_northbound_features() {
 178   # Repository setup provided via sdnc dockerfile
 179   addToFeatureBoot "$SDNR_NORTHBOUND_BOOTFEATURES"
 180 }
 181
 182 # Reconfigure ODL from default single node configuration to cluster
 183
 184 function enable_odl_cluster(){
 185   if [ -z $SDNC_REPLICAS ]; then
 186      echo "SDNC_REPLICAS is not configured in Env field"
 187      exit
 188   fi
 189
 190   # ODL NETCONF setup
 191   echo "Installing Opendaylight cluster features for mdsal and netconf"
 192
 193   #Be sure to remove feature odl-netconf-connector-all from list
 194   replaceFeatureBoot "odl-netconf-connector-all,"
 195   #Activate cluster
 196   replaceFeatureBoot odl-netconf-topology odl-netconf-clustered-topology
 197   replaceFeatureBoot odl-mdsal-all odl-mdsal-all,odl-mdsal-clustering
 198   addToFeatureBoot odl-jolokia
 199
 200   # ODL Cluster or Geo cluster configuration
 201
 202   echo "Update cluster information statically"
 203   fqdn=$(hostname -f)
 204   echo "Get current fqdn ${fqdn}"
 205
 206   # Extract node index using first digit after "-"
 207   # Example 2 from "sdnr-2.logo.ost.das.r32.com"
 208   node_index=($(echo ${fqdn} | sed -r 's/.*-([0-9]).*/\1/g'))
 209
 210   if $GEO_ENABLED; then
 211     echo "This is a Geo cluster"
 212
 213     if [ -z $IS_PRIMARY_CLUSTER ] || [ -z $MY_ODL_CLUSTER ] || [ -z $PEER_ODL_CLUSTER ]; then
 214      echo "IS_PRIMARY_CLUSTER, MY_ODL_CLUSTER and PEER_ODL_CLUSTER must all be configured in Env field"
 215      return
 216     fi
 217
 218     member_offset=1
 219     if $IS_PRIMARY_CLUSTER; then
 220        PRIMARY_NODE=${MY_ODL_CLUSTER}
 221        SECONDARY_NODE=${PEER_ODL_CLUSTER}
 222     else
 223        PRIMARY_NODE=${PEER_ODL_CLUSTER}
 224        SECONDARY_NODE=${MY_ODL_CLUSTER}
 225        member_offset=4
 226     fi
 227
 228     node_list="${PRIMARY_NODE} ${SECONDARY_NODE}"
 229     $SDNC_BIN/configure_geo_cluster.sh $((node_index+member_offset)) ${node_list}
 230   else
 231     echo "This is a local cluster"
 232     for ((i=0;i<${SDNC_REPLICAS};i++)); do
 233       #assemble node list by replaceing node-index in hostname with "i"
 234       node_name=$(echo ${fqdn} | sed -r "s/-[0-9]/-$i/g")
 235       node_list="${node_list} $node_name"
 236     done
 237     echo "Node index: $((node_index+1)) list: ${node_list[@]}"
 238     $ODL_HOME/bin/configure_cluster.sh $((node_index+1)) ${node_list}
 239   fi
 240 }
 241
 242 # -----------------------
 243 # Main script starts here
 244
 245 echo "Image path=${IMAGEPATH}"
 246 echo "Image names=${IMAGENAMES}"
 247 echo "Settings:"
 248 echo "  USER=$(whoami)"
 249 echo "  SDNC_BIN=$SDNC_BIN"
 250 echo "  SDNC_HOME=$SDNC_HOME"
 251 echo "  ODL_CERT_DIR=$ODL_CERT_DIR"
 252 echo "  CCSDKFEATUREVERSION=$CCSDKFEATUREVERSION"
 253 echo "  ENABLE_ODL_CLUSTER=$ENABLE_ODL_CLUSTER"
 254 echo "  ODL_REMOVEIDMDB=$ODL_REMOVEIDMDB"
 255 echo "  SDNC_REPLICAS=$SDNC_REPLICAS"
 256 echo "  SDNRWT=$SDNRWT"
 257 echo "  SDNRDM=$SDNRDM"
 258 echo "  SDNRONLY=$SDNRONLY"
 259 echo "  SDNRINIT=$SDNRINIT"
 260 echo "  SDNRDBURL=$SDNRDBURL"
 261 echo "  SDNRDBUSERNAME=$SDNRDBUSERNAME"
 262 echo "  SDNRDBPASSWORD=$SDNRDBPASSWORD"
 263 echo "  GEO_ENABLED=$GEO_ENABLED"
 264 echo "  IS_PRIMARY_CLUSTER=$IS_PRIMARY_CLUSTER"
 265 echo "  MY_ODL_CLUSTER=$MY_ODL_CLUSTER"
 266 echo "  PEER_ODL_CLUSTER=$PEER_ODL_CLUSTER"
 267 echo "  AAF_ENABLED=$SDNC_AAF_ENABLED"
 268
 269 if $SDNC_AAF_ENABLED; then
 270     export SDNC_AAF_STORE_DIR=/opt/app/osaaf/local
 271     export SDNC_AAF_CONFIG_DIR=/opt/app/osaaf/local
 272     export SDNC_KEYPASS=`cat /opt/app/osaaf/local/.pass`
 273     export SDNC_KEYSTORE=org.onap.sdnc.p12
 274     sed -i '/cadi_prop_files/d' $ODL_HOME/etc/system.properties
 275     echo "cadi_prop_files=$SDNC_AAF_CONFIG_DIR/org.onap.sdnc.props" >> $ODL_HOME/etc/system.properties
 276
 277     sed -i '/org.ops4j.pax.web.ssl.keystore/d' $ODL_HOME/etc/custom.properties
 278     sed -i '/org.ops4j.pax.web.ssl.password/d' $ODL_HOME/etc/custom.properties
 279     sed -i '/org.ops4j.pax.web.ssl.keypassword/d' $ODL_HOME/etc/custom.properties
 280     echo org.ops4j.pax.web.ssl.keystore=$SDNC_AAF_STORE_DIR/$SDNC_KEYSTORE >> $ODL_HOME/etc/custom.properties
 281     echo org.ops4j.pax.web.ssl.password=$SDNC_KEYPASS >> $ODL_HOME/etc/custom.properties
 282     echo org.ops4j.pax.web.ssl.keypassword=$SDNC_KEYPASS >> $ODL_HOME/etc/custom.properties
 283 fi
 284
 285 if $SDNRINIT ; then
 286   #One time intialization action
 287   initialize_sdnr
 288   init_result=$?
 289   echo "Result of init script: $init_result"
 290   if $SDNRWT ; then
 291     echo "Proceed to initialize sdnr"
 292   else
 293     exit $init_result
 294   fi
 295 fi
 296
 297 if [ ! -f ${SDNC_HOME}/.installed ]
 298 then
 299     echo "Installing SDN-C keyStore"
 300     /bin/bash ${SDNC_HOME}/bin/addSdncKeyStore.sh
 301
 302     if $ENABLE_ODL_CLUSTER ; then enable_odl_cluster ; fi
 303
 304     if $SDNRWT ; then install_sdnrwt_features ; fi
 305
 306     if $SDNR_NORTHBOUND ; then install_sdnr_northbound_features ; fi
 307
 308     echo "Installed at `date`" > ${SDNC_HOME}/.installed
 309 fi
 310
 311 # Odl configuration done
 312 ODL_FEATURES_BOOT=$(sed -n "/featuresBoot =/p" $ODL_FEATURES_BOOT_FILE)
 313 export ODL_FEATURES_BOOT
 314
 315 if [ -z "$ODL_CERT_DIR" ] ; then
 316   echo "No certs provided. Skip installation."
 317 else
 318   echo "Start background cert installer"
 319   nohup python ${SDNC_BIN}/installCerts.oom.py &
 320 fi
 321
 322 echo "Startup opendaylight"
 323 echo $ODL_FEATURES_BOOT
 324 exec ${ODL_HOME}/bin/karaf server