5 Install (or upgrade) an umbrella Helm Chart, and its subcharts, as separate Helm Releases
7 The umbrella Helm Chart is broken apart into a parent release and subchart releases.
8 Subcharts the are disabled (<chart>.enabled=false) will not be installed or upgraded.
9 All releases are grouped and deployed within the same namespace.
12 The deploy arguments must be a release and chart. The chart
13 argument can be either: a chart reference('stable/onap'), a path to a chart directory,
14 a packaged chart, or a fully qualified URL. For chart references, the latest
15 version will be specified unless the '--version' flag is set.
17 To override values in a chart, use either the '--values' flag and pass in a file
18 or use the '--set' flag and pass configuration from the command line, to force string
19 values, use '--set-string'.
21 You can specify the '--values'/'-f' flag multiple times. The priority will be given to the
22 last (right-most) file specified. For example, if both myvalues.yaml and override.yaml
23 contained a key called 'Test', the value set in override.yaml would take precedence:
25 $ helm deploy demo ./onap --namespace onap -f openstack.yaml -f overrides.yaml
27 You can specify the '--set' flag multiple times. The priority will be given to the
28 last (right-most) set specified. For example, if both 'bar' and 'newbar' values are
29 set for a key called 'foo', the 'newbar' value would take precedence:
31 $ helm deploy demo local/onap --namespace onap -f overrides.yaml --set log.enabled=false --set vid.enabled=false
34 helm deploy [RELEASE] [CHART] [flags]
37 --namespace string namespace to install the release into. Defaults to the current kube config namespace.
38 --set stringArray set values on the command line (can specify multiple or separate values with commas: key1=val1,key2=val2)
39 --set-string stringArray set STRING values on the command line (can specify multiple or separate values with commas: key1=val1,key2=val2)
40 -f, --values valueFiles specify values in a YAML file or a URL(can specify multiple) (default [])
41 --verbose enables full helm install/upgrade output during deploy
42 --set-last-applied set the last-applied-configuration annotation on all objects.This annotation is required to restore services using Ark/Veloro backup restore.
46 generate_overrides() {
47 SUBCHART_NAMES=($(cat $COMPUTED_OVERRIDES | grep -v '^\s\s'))
49 for index in "${!SUBCHART_NAMES[@]}"; do
50 START=${SUBCHART_NAMES[index]}
51 END=${SUBCHART_NAMES[index+1]}
52 if [ "$START" = "global:" ]; then
53 echo "global:" > $GLOBAL_OVERRIDES
54 cat $COMPUTED_OVERRIDES | sed '/common:/,/consul:/d' \
55 | sed -n '/^'"$START"'/,/'log:'/p' | sed '1d;$d' >> $GLOBAL_OVERRIDES
57 SUBCHART_DIR="$CACHE_SUBCHART_DIR/$(echo "$START" |cut -d':' -f1)"
58 if [ -d "$SUBCHART_DIR" ]; then
59 if [ -z "$END" ]; then
60 cat $COMPUTED_OVERRIDES | sed -n '/^'"$START"'/,/'"$END"'/p' \
61 | sed '1d;$d' | cut -c3- > $SUBCHART_DIR/subchart-overrides.yaml
63 cat $COMPUTED_OVERRIDES | sed -n '/^'"$START"'/,/^'"$END"'/p' \
64 | sed '1d;$d' | cut -c3- > $SUBCHART_DIR/subchart-overrides.yaml
70 resolve_deploy_flags() {
73 i=0 ; while [ "$i" -lt "$n" ]; do
75 if [ "$PARAM" = "-f" ] || \
76 [ "$PARAM" = "--values" ] || \
77 [ "$PARAM" = "--set" ] || \
78 [ "$PARAM" = "--set-string" ] || \
79 [ "$PARAM" = "--version" ]; then
80 # skip param and its value
83 DEPLOY_FLAGS="$DEPLOY_FLAGS $PARAM"
92 if [ -z "$1" ] || [ -z "$2" ]; then
99 FLAGS=$(echo ${@} | sed 's/^ *[^ ]* *[^ ]* *//')
100 CHART_REPO="$(echo "$CHART_URL" | cut -d'/' -f1)"
101 CHART_NAME="$(echo "$CHART_URL" | cut -d'/' -f2)"
103 CACHE_DIR=~/.local/share/helm/plugins/deploy/cache
104 echo "Use cache dir: $CACHE_DIR"
105 CHART_DIR=$CACHE_DIR/$CHART_NAME
106 CACHE_SUBCHART_DIR=$CHART_DIR-subcharts
107 LOG_DIR=$CHART_DIR/logs
109 # determine if verbose output is enabled
111 if expr "$FLAGS" : ".*--verbose.*" ; then
112 FLAGS="$(echo $FLAGS| sed -n 's/--verbose//p')"
115 # determine if delay for deployment is enabled
117 if expr "$FLAGS" : ".*--delay.*" ; then
118 FLAGS="$(echo $FLAGS| sed -n 's/--delay//p')"
121 # determine if set-last-applied flag is enabled
122 SET_LAST_APPLIED="false"
123 if expr "$FLAGS" : ".*--set-last-applied.*" ; then
124 FLAGS="$(echo $FLAGS| sed -n 's/--set-last-applied//p')"
125 SET_LAST_APPLIED="true"
127 if expr "$FLAGS" : ".*--dry-run.*" ; then
129 FLAGS="$FLAGS --debug"
132 # should pass all flags instead
133 NAMESPACE="$(echo $FLAGS | sed -n 's/.*\(namespace\).\s*/\1/p' | cut -c10- | cut -d' ' -f1)"
135 VERSION="$(echo $FLAGS | sed -n 's/.*\(version\).\s*/\1/p' | cut -c8- | cut -d' ' -f1)"
137 if [ ! -z $VERSION ]; then
138 VERSION="--version $VERSION"
141 # Remove all override values passed in as arguments. These will be used during dry run
142 # to resolve computed override values. Remaining flags will be passed on during
143 # actual upgrade/install of parent and subcharts.
144 DEPLOY_FLAGS=$(resolve_deploy_flags "$FLAGS")
146 # determine if upgrading individual subchart or entire parent + subcharts
147 SUBCHART_RELEASE="$(echo "$RELEASE" |cut -d'-' -f2)"
148 # update specified subchart without parent
149 RELEASE="$(echo "$RELEASE" |cut -d'-' -f1)"
150 if [ "$SUBCHART_RELEASE" = "$RELEASE" ]; then
154 # clear previously cached charts
157 # fetch umbrella chart (parent chart containing subcharts)
158 if [ -d "$CHART_URL" ]; then
160 cp -R $CHART_URL/* $CHART_DIR/
162 charts=$CHART_DIR/charts/*
163 for subchart in $charts ; do
164 tar xzf ${subchart} -C $CHART_DIR/charts/
166 rm -rf $CHART_DIR/charts/*.tgz
168 echo "fetching $CHART_URL"
169 helm fetch $CHART_URL --untar --untardir $CACHE_DIR $VERSION
172 # create log driectory
175 # move out subcharts to process separately
176 mkdir -p $CACHE_SUBCHART_DIR
177 mv $CHART_DIR/charts/* $CACHE_SUBCHART_DIR/
178 # temp hack - parent chart needs common subchart
179 mv $CACHE_SUBCHART_DIR/common $CHART_DIR/charts/
181 # disable dependencies
182 rm $CHART_DIR/Chart.lock
183 sed -n '1,/dependencies:/p;/description:/,$p' $CHART_DIR/Chart.yaml | grep -v dependencies > $CHART_DIR/deploy_Chart.yaml
184 mv $CHART_DIR/Chart.yaml $CHART_DIR/Chart.deploy
185 mv $CHART_DIR/deploy_Chart.yaml $CHART_DIR/Chart.yaml
187 # compute overrides for parent and all subcharts
188 COMPUTED_OVERRIDES=$CACHE_DIR/$CHART_NAME/computed-overrides.yaml
189 helm upgrade -i $RELEASE $CHART_DIR $FLAGS --dry-run --debug \
190 | sed -n '/COMPUTED VALUES:/,/HOOKS:/p' | sed '1d;$d' > $COMPUTED_OVERRIDES
192 # extract global overrides to apply to parent and all subcharts
193 GLOBAL_OVERRIDES=$CHART_DIR/global-overrides.yaml
194 generate_overrides $COMPUTED_OVERRIDES $GLOBAL_OVERRIDES
196 # upgrade/install parent chart first
197 if [ -z "$SUBCHART_RELEASE" ]; then
198 LOG_FILE=$LOG_DIR/${RELEASE}.log
201 helm upgrade -i $RELEASE $CHART_DIR $DEPLOY_FLAGS -f $COMPUTED_OVERRIDES \
204 if [ "$VERBOSE" = "true" ]; then
207 echo "release \"$RELEASE\" deployed"
209 # Add annotation last-applied-configuration if set-last-applied flag is set
210 if [ "$SET_LAST_APPLIED" = "true" ]; then
211 helm get manifest ${RELEASE} \
212 | kubectl apply set-last-applied --create-annotation -n onap -f - \
217 # upgrade/install each "enabled" subchart
218 cd $CACHE_SUBCHART_DIR/
219 #“helm ls” is an expensive command in that it can take a long time to execute.
220 #So cache the results to prevent repeated execution.
221 ALL_HELM_RELEASES=$(helm ls -q)
222 for subchart in * ; do
223 SUBCHART_OVERRIDES=$CACHE_SUBCHART_DIR/$subchart/subchart-overrides.yaml
226 if [ -f $SUBCHART_OVERRIDES ]; then
227 SUBCHART_ENABLED=$(cat $SUBCHART_OVERRIDES | grep -c "^enabled: true")
230 if [ $SUBCHART_ENABLED -eq 1 ]; then
231 if [ -z "$SUBCHART_RELEASE" ] || [ "$SUBCHART_RELEASE" = "$subchart" ]; then
232 LOG_FILE=$LOG_DIR/"${RELEASE}-${subchart}".log
235 helm upgrade -i "${RELEASE}-${subchart}" $CACHE_SUBCHART_DIR/$subchart \
236 $DEPLOY_FLAGS -f $GLOBAL_OVERRIDES -f $SUBCHART_OVERRIDES \
239 if [ "$VERBOSE" = "true" ]; then
242 echo "release \"${RELEASE}-${subchart}\" deployed"
244 # Add annotation last-applied-configuration if set-last-applied flag is set
245 if [ "$SET_LAST_APPLIED" = "true" ]; then
246 helm get manifest "${RELEASE}-${subchart}" \
247 | kubectl apply set-last-applied --create-annotation -n onap -f - \
251 if [ "$DELAY" = "true" ]; then
256 array=($(echo "$ALL_HELM_RELEASES" | grep "${RELEASE}-${subchart}"))
258 for i in $(seq $(($n-1)) -1 0); do
259 helm del "${array[i]}"
264 # report on success/failures of installs/upgrades
265 helm ls --all-namespaces | grep -i FAILED | grep $RELEASE
267 HELM_VER=$(helm version --template "{{.Version}}")
270 case "${1:-"help"}" in
281 deploy $1 $2 $(echo ${@} | sed 's/^ *[^ ]* *[^ ]* *//')