Merge "[POLICY] Disable helm endpoints by default in k8s participant"
[oom.git] / kubernetes / aai / components / aai-graphadmin / templates / job-migration.yaml
1 {{/*
2 #
3 # ============LICENSE_START=======================================================
4 # org.onap.aai
5 # ================================================================================
6 # Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
7 # Copyright (c) 2020 Nokia Intellectual Property. All rights reserved.
8 # Copyright (c) 2020-2021 Orange Intellectual Property. All rights reserved.
9 # ================================================================================
10 # Licensed under the Apache License, Version 2.0 (the "License");
11 # you may not use this file except in compliance with the License.
12 # You may obtain a copy of the License at
13 #
14 #    http://www.apache.org/licenses/LICENSE-2.0
15 #
16 # Unless required by applicable law or agreed to in writing, software
17 # distributed under the License is distributed on an "AS IS" BASIS,
18 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
19 # See the License for the specific language governing permissions and
20 # limitations under the License.
21 # ============LICENSE_END=========================================================
22
23 # In ONAP, the following job will always be run on each installation
24 # The following job will go through the latest oxm and
25 # create properties based on the data type defined in the oxm
26 # and create the required indexes for the appropriate properties
27 # This can be run multiple times as the code if the index or property already exists
28 # then the index or property won't be created again
29 # NOTE - During the execution of the createSchema job, there should
30 # be no other janusgraph connection to the graph as its the reason
31 # that resources traversal and graphadmin wait until this job is done
32 # If you are using an existing cassandra cluster not coming from oom
33 # then it is your job to ensure that there are no connections to the database
34 */}}
35
36 {{- if .Values.global.jobs.migration.enabled }}
37 ---
38 apiVersion: batch/v1
39 kind: Job
40 metadata:
41   name: {{ include "common.fullname" . }}-migration
42   namespace: {{ include "common.namespace" . }}
43   labels:
44     app: {{ include "common.name" . }}-job
45     chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
46     release: {{ include "common.release" . }}
47     heritage: {{ .Release.Service }}
48   annotations:
49     "helm.sh/hook": post-upgrade,post-rollback,post-install
50     "helm.sh/hook-weight": "1"
51     "helm.sh/hook-delete-policy": before-hook-creation
52 spec:
53   backoffLimit: 20
54   template:
55     metadata:
56       labels:
57         app: {{ include "common.name" . }}-job
58         release: {{ include "common.release" . }}
59       name: {{ include "common.name" . }}
60     spec:
61       initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
62       {{- if .Values.global.aafEnabled }}
63       - command:
64         - sh
65         args:
66         - -c
67         - |
68           echo "*** retrieve Truststore and Keystore password"
69           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
70           echo "*** obfuscate them "
71           export KEYSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.45.v20220203.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
72           export KEYSTORE_JKS_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.45.v20220203.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_JKS_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
73           export TRUSTSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.45.v20220203.jar org.eclipse.jetty.util.security.Password ${TRUSTSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
74           echo "KEYSTORE_PASSWORD=${KEYSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
75           echo "KEYSTORE_JKS_PASSWORD=${KEYSTORE_JKS_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
76           echo "TRUSTSTORE_PASSWORD=${TRUSTSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
77         image: {{ include "repositoryGenerator.image.jetty" . }}
78         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
79         name: {{ include "common.name" . }}-obfuscate
80         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
81         securityContext:
82           runAsUser: {{ .Values.securityContext.user_id }}
83       - command:
84         - sh
85         args:
86         - -c
87         - |
88           echo "*** Set obfuscated Truststore and Keystore password into configuration file"
89           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
90           cd /config-input
91           for PFILE in `ls -1`
92           do
93             envsubst <${PFILE} >/config/${PFILE}
94           done
95         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
96         - mountPath: /config-input
97           name: properties-input
98         - mountPath: /config
99           name: properties
100         image: {{ include "repositoryGenerator.image.envsubst" . }}
101         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
102         name: {{ include "common.name" . }}-update-config
103       {{- end }}
104       - command:
105         - /app/ready.py
106         args:
107         - --container-name
108         {{- if .Values.global.cassandra.localCluster }}
109         - aai-cassandra
110         {{- else }}
111         - cassandra
112         {{- end }}
113         - --container-name
114         - aai-schema-service
115         env:
116         - name: NAMESPACE
117           valueFrom:
118             fieldRef:
119               apiVersion: v1
120               fieldPath: metadata.namespace
121         image: {{ include "repositoryGenerator.image.readiness" . }}
122         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
123         name: {{ include "common.name" . }}-readiness
124       - command:
125         - sh
126         args:
127         - -c
128         - |
129            bash docker-entrypoint.sh dataRestoreFromSnapshot.sh `ls -t /opt/app/aai-graphadmin/logs/data/dataSnapshots|head -1|awk -F".P" '{ print $1 }'`
130         env:
131         - name: LOCAL_USER_ID
132           value: {{ .Values.securityContext.user_id | quote }}
133         - name: LOCAL_GROUP_ID
134           value: {{ .Values.securityContext.group_id | quote }}
135         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
136         - mountPath: /etc/localtime
137           name: localtime
138           readOnly: true
139         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
140           name: config
141           subPath: janusgraph-realtime.properties
142         - mountPath: /opt/app/aai-graphadmin/logs/data/dataSnapshots
143           name: snapshots
144         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
145           name: config
146           subPath: janusgraph-cached.properties
147         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
148           name: properties
149           subPath: aaiconfig.properties
150         - mountPath: /opt/aai/logroot/AAI-GA
151           name: logs
152         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
153           name: config
154           subPath: logback.xml
155         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
156           name: config
157           subPath: localhost-access-logback.xml
158         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
159           name: properties
160           subPath: application.properties
161         image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
162         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
163         name: {{ include "common.name" . }}-restore-backup
164       containers:
165       - image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
166         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
167         name: {{ include "common.name" . }}-perform-migration
168         command:
169         - sh
170         args:
171         - -c
172         - |
173            bash docker-entrypoint.sh run_Migrations.sh -e UpdateAaiUriIndexMigration --commit --skipPreMigrationSnapShot --runDisabled RebuildAllEdges ;
174            {{ include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
175         env:
176         - name: LOCAL_USER_ID
177           value: {{ .Values.securityContext.user_id | quote }}
178         - name: LOCAL_GROUP_ID
179           value: {{ .Values.securityContext.group_id | quote }}
180         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
181         - mountPath: /etc/localtime
182           name: localtime
183           readOnly: true
184         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
185           name: config
186           subPath: janusgraph-realtime.properties
187         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
188           name: config
189           subPath: janusgraph-cached.properties
190         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
191           name: properties
192           subPath: aaiconfig.properties
193         - mountPath: /opt/aai/logroot/AAI-GA
194           name: logs
195         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
196           name: config
197           subPath: logback.xml
198         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
199           name: config
200           subPath: localhost-access-logback.xml
201         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
202           name: properties
203           subPath: application.properties
204         resources: {{ include "common.resources" . | nindent 10 }}
205       {{- if .Values.nodeSelector }}
206       nodeSelector: {{ toYaml .Values.nodeSelector | nindent 8 }}
207       {{- end }}
208       {{- if .Values.affinity }}
209       affinity: {{ toYaml .Values.affinity | nindent 8 }}
210       {{- end }}
211       volumes: {{ include "common.certInitializer.volumes" . | nindent 6 }}
212       - name: localtime
213         hostPath:
214           path: /etc/localtime
215       {{ include "common.log.volumes" (dict "dot" . "configMapNamePrefix" (tpl .Values.logConfigMapNamePrefix .)) | nindent 8 }}
216       - name: {{ include "common.fullname" . }}-logs
217         emptyDir: {}
218       - name: {{ include "common.fullname" . }}-config
219         configMap:
220           name: {{ include "common.fullname" . }}-configmap
221       - name: {{ include "common.fullname" . }}-snapshots
222         persistentVolumeClaim:
223           claimName: {{ include "common.fullname" . }}-migration
224       - name: properties
225       {{- if .Values.global.aafEnabled }}
226         emptyDir:
227           medium: Memory
228       - name: properties-input
229       {{- end }}
230         configMap:
231           name: {{ include "common.fullname" . }}-properties
232       restartPolicy: Never
233       imagePullSecrets:
234       - name: "{{ include "common.namespace" . }}-docker-registry-key"
235 ---
236 apiVersion: batch/v1
237 kind: Job
238 metadata:
239   name: {{ include "common.fullname" . }}-db-backup-job
240   namespace: {{ include "common.namespace" . }}
241   labels:
242     app: {{ include "common.name" . }}-db-backup-job
243     release: {{ include "common.release" . }}
244     heritage: {{ .Release.Service }}
245     chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
246   annotations:
247     "helm.sh/hook": pre-upgrade,pre-install
248     "helm.sh/hook-weight": "2"
249     "helm.sh/hook-delete-policy": before-hook-creation
250 spec:
251   backoffLimit: 20
252   template:
253     metadata:
254       labels:
255         app: {{ include "common.name" . }}-db-backup-job
256         release: {{ include "common.release" . }}
257       name: {{ include "common.name" . }}
258     spec:
259       initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
260       {{- if .Values.global.aafEnabled }}
261       - command:
262         - sh
263         args:
264         - -c
265         - |
266           echo "*** retrieve Truststore and Keystore password"
267           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
268           echo "*** obfuscate them "
269           export KEYSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.45.v20220203.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
270           export KEYSTORE_JKS_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.45.v20220203.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_JKS_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
271           export TRUSTSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.45.v20220203.jar org.eclipse.jetty.util.security.Password ${TRUSTSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
272           echo "KEYSTORE_PASSWORD=${KEYSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
273           echo "KEYSTORE_JKS_PASSWORD=${KEYSTORE_JKS_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
274           echo "TRUSTSTORE_PASSWORD=${TRUSTSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
275         image: {{ include "repositoryGenerator.image.jetty" . }}
276         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
277         name: {{ include "common.name" . }}-obfuscate
278         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
279         securityContext:
280           runAsUser: {{ .Values.securityContext.user_id }}
281       - command:
282         - sh
283         args:
284         - -c
285         - |
286           echo "*** Set obfuscated Truststore and Keystore password into configuration file"
287           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
288           cd /config-input
289           for PFILE in `ls -1`
290           do
291             envsubst <${PFILE} >/config/${PFILE}
292           done
293         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
294         - mountPath: /config-input
295           name: properties-input
296         - mountPath: /config
297           name: properties
298         image: {{ include "repositoryGenerator.image.envsubst" . }}
299         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
300         name: {{ include "common.name" . }}-update-config
301       {{- end }}
302       {{ if eq .Values.global.jobs.migration.remoteCassandra.enabled false }}
303       - command:
304         - /bin/bash
305         - -c
306         - /app/ready.py --container-name aai-cassandra --timeout 1 || /app/ready.py --container-name cassandra
307         env:
308         - name: NAMESPACE
309           valueFrom:
310             fieldRef:
311               apiVersion: v1
312               fieldPath: metadata.namespace
313         image: {{ include "repositoryGenerator.image.readiness" . }}
314         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
315         name: {{ include "common.name" . }}-db-backup-readiness
316       {{- end }}
317       containers:
318       - name: {{ include "common.name" . }}-db-backup-job
319         image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
320         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
321         command:
322         - sh
323         args:
324         - -c
325         - |
326            bash docker-entrypoint.sh dataSnapshot.sh
327            {{ include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
328         env:
329         - name: LOCAL_USER_ID
330           value: {{ .Values.securityContext.user_id | quote }}
331         - name: LOCAL_GROUP_ID
332           value: {{ .Values.securityContext.group_id | quote }}
333         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
334         - mountPath: /etc/localtime
335           name: localtime
336           readOnly: true
337         - mountPath: /opt/app/aai-graphadmin/logs/data/dataSnapshots
338           name: snapshots
339         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
340           name: migration
341           subPath: janusgraph-migration-real.properties
342         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
343           name: migration
344           subPath: janusgraph-migration-cached.properties
345         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
346           name: properties
347           subPath: aaiconfig.properties
348         - mountPath: /opt/aai/logroot/AAI-RES/
349           name: logs
350         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
351           name: config
352           subPath: logback.xml
353         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
354           name: config
355           subPath: localhost-access-logback.xml
356         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
357           name: properties
358           subPath: application.properties
359         resources: {{ include "common.resources" . | nindent 10 }}
360       {{- if .Values.nodeSelector }}
361       nodeSelector: {{ toYaml .Values.nodeSelector | nindent 8 }}
362       {{- end }}
363       {{- if .Values.affinity }}
364       affinity: {{ toYaml .Values.affinity | nindent 8 }}
365       {{- end }}
366       volumes: {{ include "common.resources" . | nindent 10 }}
367       - name: localtime
368         hostPath:
369           path: /etc/localtime
370       - name: logs
371         emptyDir: {}
372       - name: config
373         configMap:
374           name: {{ include "common.fullname" . }}
375       - name: properties-input
376         configMap:
377           name: {{ include "common.fullname" . }}-properties
378       - name: properties
379         emptyDir:
380           medium: Memory
381       - name: migration
382         configMap:
383           name: {{ include "common.fullname" . }}-migration
384       - name: snapshots
385         persistentVolumeClaim:
386           claimName: {{ include "common.fullname" . }}-migration
387       restartPolicy: Never
388       imagePullSecrets:
389       - name: "{{ include "common.namespace" . }}-docker-registry-key"
390 {{ end }}