kubernetes/aai/components/aai-graphadmin/templates/job-migration.yaml

   1 {{/*
   2 #
   3 # ============LICENSE_START=======================================================
   4 # org.onap.aai
   5 # ================================================================================
   6 # Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
   7 # Copyright (c) 2020 Nokia Intellectual Property. All rights reserved.
   8 # Copyright (c) 2020-2021 Orange Intellectual Property. All rights reserved.
   9 # ================================================================================
  10 # Licensed under the Apache License, Version 2.0 (the "License");
  11 # you may not use this file except in compliance with the License.
  12 # You may obtain a copy of the License at
  13 #
  14 #    http://www.apache.org/licenses/LICENSE-2.0
  15 #
  16 # Unless required by applicable law or agreed to in writing, software
  17 # distributed under the License is distributed on an "AS IS" BASIS,
  18 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  19 # See the License for the specific language governing permissions and
  20 # limitations under the License.
  21 # ============LICENSE_END=========================================================
  22
  23 # In ONAP, the following job will always be run on each installation
  24 # The following job will go through the latest oxm and
  25 # create properties based on the data type defined in the oxm
  26 # and create the required indexes for the appropriate properties
  27 # This can be run multiple times as the code if the index or property already exists
  28 # then the index or property won't be created again
  29 # NOTE - During the execution of the createSchema job, there should
  30 # be no other janusgraph connection to the graph as its the reason
  31 # that resources traversal and graphadmin wait until this job is done
  32 # If you are using an existing cassandra cluster not coming from oom
  33 # then it is your job to ensure that there are no connections to the database
  34 */}}
  35
  36 {{- if .Values.global.jobs.migration.enabled }}
  37 ---
  38 apiVersion: batch/v1
  39 kind: Job
  40 metadata:
  41   name: {{ include "common.fullname" . }}-migration
  42   namespace: {{ include "common.namespace" . }}
  43   labels:
  44     app: {{ include "common.name" . }}-job
  45     chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
  46     release: {{ include "common.release" . }}
  47     heritage: {{ .Release.Service }}
  48   annotations:
  49     "helm.sh/hook": post-upgrade,post-rollback,post-install
  50     "helm.sh/hook-weight": "1"
  51     "helm.sh/hook-delete-policy": before-hook-creation
  52 spec:
  53   backoffLimit: 20
  54   template:
  55     metadata:
  56       labels:
  57         app: {{ include "common.name" . }}-job
  58         release: {{ include "common.release" . }}
  59       name: {{ include "common.name" . }}
  60     spec:
  61       initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
  62       {{- if .Values.global.aafEnabled }}
  63       - command:
  64         - sh
  65         args:
  66         - -c
  67         - |
  68           echo "*** retrieve Truststore and Keystore password"
  69           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
  70           echo "*** obfuscate them "
  71           export JETTY_UTIL_JAR=$(find /usr/local/jetty/lib/ -regextype sed -regex ".*jetty-util-[0-9].*.jar")
  72           export KEYSTORE_PASSWORD=`java -cp ${JETTY_UTIL_JAR} org.eclipse.jetty.util.security.Password ${KEYSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
  73           export KEYSTORE_JKS_PASSWORD=`java -cp ${JETTY_UTIL_JAR} org.eclipse.jetty.util.security.Password ${KEYSTORE_JKS_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
  74           export TRUSTSTORE_PASSWORD=`java -cp ${JETTY_UTIL_JAR} org.eclipse.jetty.util.security.Password ${TRUSTSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
  75           echo "KEYSTORE_PASSWORD=${KEYSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
  76           echo "KEYSTORE_JKS_PASSWORD=${KEYSTORE_JKS_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
  77           echo "TRUSTSTORE_PASSWORD=${TRUSTSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
  78         image: {{ include "repositoryGenerator.image.jetty" . }}
  79         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
  80         name: {{ include "common.name" . }}-obfuscate
  81         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
  82         securityContext:
  83           runAsUser: {{ .Values.securityContext.user_id }}
  84       - command:
  85         - sh
  86         args:
  87         - -c
  88         - |
  89           echo "*** Set obfuscated Truststore and Keystore password into configuration file"
  90           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
  91           cd /config-input
  92           for PFILE in `ls -1`
  93           do
  94             envsubst <${PFILE} >/config/${PFILE}
  95           done
  96         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
  97         - mountPath: /config-input
  98           name: properties-input
  99         - mountPath: /config
 100           name: properties
 101         image: {{ include "repositoryGenerator.image.envsubst" . }}
 102         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 103         name: {{ include "common.name" . }}-update-config
 104       {{- end }}
 105       - command:
 106         - /app/ready.py
 107         args:
 108         - --container-name
 109         {{- if .Values.global.cassandra.localCluster }}
 110         - aai-cassandra
 111         {{- else }}
 112         - cassandra
 113         {{- end }}
 114         - --container-name
 115         - aai-schema-service
 116         env:
 117         - name: NAMESPACE
 118           valueFrom:
 119             fieldRef:
 120               apiVersion: v1
 121               fieldPath: metadata.namespace
 122         image: {{ include "repositoryGenerator.image.readiness" . }}
 123         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 124         name: {{ include "common.name" . }}-readiness
 125       - command:
 126         - sh
 127         args:
 128         - -c
 129         - |
 130            bash docker-entrypoint.sh dataRestoreFromSnapshot.sh `ls -t /opt/app/aai-graphadmin/logs/data/dataSnapshots|head -1|awk -F".P" '{ print $1 }'`
 131         env:
 132         - name: LOCAL_USER_ID
 133           value: {{ .Values.securityContext.user_id | quote }}
 134         - name: LOCAL_GROUP_ID
 135           value: {{ .Values.securityContext.group_id | quote }}
 136         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
 137         - mountPath: /etc/localtime
 138           name: localtime
 139           readOnly: true
 140         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
 141           name: config
 142           subPath: janusgraph-realtime.properties
 143         - mountPath: /opt/app/aai-graphadmin/logs/data/dataSnapshots
 144           name: snapshots
 145         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
 146           name: config
 147           subPath: janusgraph-cached.properties
 148         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
 149           name: properties
 150           subPath: aaiconfig.properties
 151         - mountPath: /opt/aai/logroot/AAI-GA
 152           name: logs
 153         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
 154           name: config
 155           subPath: logback.xml
 156         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
 157           name: config
 158           subPath: localhost-access-logback.xml
 159         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
 160           name: properties
 161           subPath: application.properties
 162         image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
 163         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 164         name: {{ include "common.name" . }}-restore-backup
 165       containers:
 166       - image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
 167         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 168         name: {{ include "common.name" . }}-perform-migration
 169         command:
 170         - sh
 171         args:
 172         - -c
 173         - |
 174            bash docker-entrypoint.sh run_Migrations.sh -e UpdateAaiUriIndexMigration --commit --skipPreMigrationSnapShot --runDisabled RebuildAllEdges ;
 175            {{ include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
 176         env:
 177         - name: LOCAL_USER_ID
 178           value: {{ .Values.securityContext.user_id | quote }}
 179         - name: LOCAL_GROUP_ID
 180           value: {{ .Values.securityContext.group_id | quote }}
 181         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
 182         - mountPath: /etc/localtime
 183           name: localtime
 184           readOnly: true
 185         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
 186           name: config
 187           subPath: janusgraph-realtime.properties
 188         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
 189           name: config
 190           subPath: janusgraph-cached.properties
 191         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
 192           name: properties
 193           subPath: aaiconfig.properties
 194         - mountPath: /opt/aai/logroot/AAI-GA
 195           name: logs
 196         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
 197           name: config
 198           subPath: logback.xml
 199         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
 200           name: config
 201           subPath: localhost-access-logback.xml
 202         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
 203           name: properties
 204           subPath: application.properties
 205         resources: {{ include "common.resources" . | nindent 10 }}
 206       {{- if .Values.nodeSelector }}
 207       nodeSelector: {{ toYaml .Values.nodeSelector | nindent 8 }}
 208       {{- end }}
 209       {{- if .Values.affinity }}
 210       affinity: {{ toYaml .Values.affinity | nindent 8 }}
 211       {{- end }}
 212       volumes: {{ include "common.certInitializer.volumes" . | nindent 6 }}
 213       - name: localtime
 214         hostPath:
 215           path: /etc/localtime
 216       {{ include "common.log.volumes" (dict "dot" . "configMapNamePrefix" (tpl .Values.logConfigMapNamePrefix .)) | nindent 8 }}
 217       - name: {{ include "common.fullname" . }}-logs
 218         emptyDir: {}
 219       - name: {{ include "common.fullname" . }}-config
 220         configMap:
 221           name: {{ include "common.fullname" . }}-configmap
 222       - name: {{ include "common.fullname" . }}-snapshots
 223         persistentVolumeClaim:
 224           claimName: {{ include "common.fullname" . }}-migration
 225       - name: properties
 226       {{- if .Values.global.aafEnabled }}
 227         emptyDir:
 228           medium: Memory
 229       - name: properties-input
 230       {{- end }}
 231         configMap:
 232           name: {{ include "common.fullname" . }}-properties
 233       restartPolicy: Never
 234       imagePullSecrets:
 235       - name: "{{ include "common.namespace" . }}-docker-registry-key"
 236 ---
 237 apiVersion: batch/v1
 238 kind: Job
 239 metadata:
 240   name: {{ include "common.fullname" . }}-db-backup-job
 241   namespace: {{ include "common.namespace" . }}
 242   labels:
 243     app: {{ include "common.name" . }}-db-backup-job
 244     release: {{ include "common.release" . }}
 245     heritage: {{ .Release.Service }}
 246     chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
 247   annotations:
 248     "helm.sh/hook": pre-upgrade,pre-install
 249     "helm.sh/hook-weight": "2"
 250     "helm.sh/hook-delete-policy": before-hook-creation
 251 spec:
 252   backoffLimit: 20
 253   template:
 254     metadata:
 255       labels:
 256         app: {{ include "common.name" . }}-db-backup-job
 257         release: {{ include "common.release" . }}
 258       name: {{ include "common.name" . }}
 259     spec:
 260       initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
 261       {{- if .Values.global.aafEnabled }}
 262       - command:
 263         - sh
 264         args:
 265         - -c
 266         - |
 267           echo "*** retrieve Truststore and Keystore password"
 268           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
 269           echo "*** obfuscate them "
 270           export JETTY_UTIL_JAR=$(find /usr/local/jetty/lib/ -regextype sed -regex ".*jetty-util-[0-9].*.jar")
 271           export KEYSTORE_PASSWORD=`java -cp ${JETTY_UTIL_JAR} org.eclipse.jetty.util.security.Password ${KEYSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
 272           export KEYSTORE_JKS_PASSWORD=`java -cp ${JETTY_UTIL_JAR} org.eclipse.jetty.util.security.Password ${KEYSTORE_JKS_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
 273           export TRUSTSTORE_PASSWORD=`java -cp ${JETTY_UTIL_JAR} org.eclipse.jetty.util.security.Password ${TRUSTSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
 274           echo "KEYSTORE_PASSWORD=${KEYSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
 275           echo "KEYSTORE_JKS_PASSWORD=${KEYSTORE_JKS_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
 276           echo "TRUSTSTORE_PASSWORD=${TRUSTSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
 277         image: {{ include "repositoryGenerator.image.jetty" . }}
 278         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 279         name: {{ include "common.name" . }}-obfuscate
 280         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
 281         securityContext:
 282           runAsUser: {{ .Values.securityContext.user_id }}
 283       - command:
 284         - sh
 285         args:
 286         - -c
 287         - |
 288           echo "*** Set obfuscated Truststore and Keystore password into configuration file"
 289           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
 290           cd /config-input
 291           for PFILE in `ls -1`
 292           do
 293             envsubst <${PFILE} >/config/${PFILE}
 294           done
 295         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
 296         - mountPath: /config-input
 297           name: properties-input
 298         - mountPath: /config
 299           name: properties
 300         image: {{ include "repositoryGenerator.image.envsubst" . }}
 301         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 302         name: {{ include "common.name" . }}-update-config
 303       {{- end }}
 304       {{ if eq .Values.global.jobs.migration.remoteCassandra.enabled false }}
 305       - command:
 306         - /bin/bash
 307         - -c
 308         - /app/ready.py --container-name aai-cassandra --timeout 1 || /app/ready.py --container-name cassandra
 309         env:
 310         - name: NAMESPACE
 311           valueFrom:
 312             fieldRef:
 313               apiVersion: v1
 314               fieldPath: metadata.namespace
 315         image: {{ include "repositoryGenerator.image.readiness" . }}
 316         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 317         name: {{ include "common.name" . }}-db-backup-readiness
 318       {{- end }}
 319       containers:
 320       - name: {{ include "common.name" . }}-db-backup-job
 321         image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
 322         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
 323         command:
 324         - sh
 325         args:
 326         - -c
 327         - |
 328            bash docker-entrypoint.sh dataSnapshot.sh
 329            {{ include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
 330         env:
 331         - name: LOCAL_USER_ID
 332           value: {{ .Values.securityContext.user_id | quote }}
 333         - name: LOCAL_GROUP_ID
 334           value: {{ .Values.securityContext.group_id | quote }}
 335         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
 336         - mountPath: /etc/localtime
 337           name: localtime
 338           readOnly: true
 339         - mountPath: /opt/app/aai-graphadmin/logs/data/dataSnapshots
 340           name: snapshots
 341         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
 342           name: migration
 343           subPath: janusgraph-migration-real.properties
 344         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
 345           name: migration
 346           subPath: janusgraph-migration-cached.properties
 347         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
 348           name: properties
 349           subPath: aaiconfig.properties
 350         - mountPath: /opt/aai/logroot/AAI-RES/
 351           name: logs
 352         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
 353           name: config
 354           subPath: logback.xml
 355         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
 356           name: config
 357           subPath: localhost-access-logback.xml
 358         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
 359           name: properties
 360           subPath: application.properties
 361         resources: {{ include "common.resources" . | nindent 10 }}
 362       {{- if .Values.nodeSelector }}
 363       nodeSelector: {{ toYaml .Values.nodeSelector | nindent 8 }}
 364       {{- end }}
 365       {{- if .Values.affinity }}
 366       affinity: {{ toYaml .Values.affinity | nindent 8 }}
 367       {{- end }}
 368       volumes: {{ include "common.resources" . | nindent 10 }}
 369       - name: localtime
 370         hostPath:
 371           path: /etc/localtime
 372       - name: logs
 373         emptyDir: {}
 374       - name: config
 375         configMap:
 376           name: {{ include "common.fullname" . }}
 377       - name: properties-input
 378         configMap:
 379           name: {{ include "common.fullname" . }}-properties
 380       - name: properties
 381         emptyDir:
 382           medium: Memory
 383       - name: migration
 384         configMap:
 385           name: {{ include "common.fullname" . }}-migration
 386       - name: snapshots
 387         persistentVolumeClaim:
 388           claimName: {{ include "common.fullname" . }}-migration
 389       restartPolicy: Never
 390       imagePullSecrets:
 391       - name: "{{ include "common.namespace" . }}-docker-registry-key"
 392 {{ end }}