[ROBOT] ADD BULKPM testsuite to use helm based component services
[oom.git] / kubernetes / aai / components / aai-graphadmin / templates / job-migration.yaml
1 {{/*
2 #
3 # ============LICENSE_START=======================================================
4 # org.onap.aai
5 # ================================================================================
6 # Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
7 # Copyright (c) 2020 Nokia Intellectual Property. All rights reserved.
8 # Copyright (c) 2020-2021 Orange Intellectual Property. All rights reserved.
9 # ================================================================================
10 # Licensed under the Apache License, Version 2.0 (the "License");
11 # you may not use this file except in compliance with the License.
12 # You may obtain a copy of the License at
13 #
14 #    http://www.apache.org/licenses/LICENSE-2.0
15 #
16 # Unless required by applicable law or agreed to in writing, software
17 # distributed under the License is distributed on an "AS IS" BASIS,
18 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
19 # See the License for the specific language governing permissions and
20 # limitations under the License.
21 # ============LICENSE_END=========================================================
22
23 # In ONAP, the following job will always be run on each installation
24 # The following job will go through the latest oxm and
25 # create properties based on the data type defined in the oxm
26 # and create the required indexes for the appropriate properties
27 # This can be run multiple times as the code if the index or property already exists
28 # then the index or property won't be created again
29 # NOTE - During the execution of the createSchema job, there should
30 # be no other janusgraph connection to the graph as its the reason
31 # that resources traversal and graphadmin wait until this job is done
32 # If you are using an existing cassandra cluster not coming from oom
33 # then it is your job to ensure that there are no connections to the database
34 */}}
35
36 {{- if .Values.global.jobs.migration.enabled }}
37 ---
38 apiVersion: batch/v1
39 kind: Job
40 metadata:
41   name: {{ include "common.fullname" . }}-migration
42   namespace: {{ include "common.namespace" . }}
43   labels:
44     app: {{ include "common.name" . }}-job
45     chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
46     release: {{ include "common.release" . }}
47     heritage: {{ .Release.Service }}
48   annotations:
49     "helm.sh/hook": post-upgrade,post-rollback,post-install
50     "helm.sh/hook-weight": "1"
51     "helm.sh/hook-delete-policy": before-hook-creation
52 spec:
53   backoffLimit: 20
54   template:
55     metadata:
56       labels:
57         app: {{ include "common.name" . }}-job
58         release: {{ include "common.release" . }}
59       name: {{ include "common.name" . }}
60     spec:
61       initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
62       {{- if .Values.global.aafEnabled }}
63       - command:
64         - sh
65         args:
66         - -c
67         - |
68           echo "*** retrieve Truststore and Keystore password"
69           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
70           echo "*** obfuscate them "
71           export KEYSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.44.v20210927.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
72           export KEYSTORE_JKS_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.44.v20210927.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_JKS_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
73           export TRUSTSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.44.v20210927.jar org.eclipse.jetty.util.security.Password ${TRUSTSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
74           echo "KEYSTORE_PASSWORD=${KEYSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
75           echo "KEYSTORE_JKS_PASSWORD=${KEYSTORE_JKS_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
76           echo "TRUSTSTORE_PASSWORD=${TRUSTSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
77         image: {{ include "repositoryGenerator.image.jetty" . }}
78         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
79         name: {{ include "common.name" . }}-obfuscate
80         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
81         securityContext:
82           runAsUser: {{ .Values.securityContext.user_id }}
83       - command:
84         - sh
85         args:
86         - -c
87         - |
88           echo "*** Set obfuscated Truststore and Keystore password into configuration file"
89           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
90           cd /config-input
91           for PFILE in `ls -1`
92           do
93             envsubst <${PFILE} >/config/${PFILE}
94           done
95         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
96         - mountPath: /config-input
97           name: properties-input
98         - mountPath: /config
99           name: properties
100         image: {{ include "repositoryGenerator.image.envsubst" . }}
101         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
102         name: {{ include "common.name" . }}-update-config
103       {{- end }}
104       - command:
105         - /app/ready.py
106         args:
107         - --container-name
108         {{- if .Values.global.cassandra.localCluster }}
109         - aai-cassandra
110         {{- else }}
111         - cassandra
112         {{- end }}
113         - --container-name
114         - aai-schema-service
115         env:
116         - name: NAMESPACE
117           valueFrom:
118             fieldRef:
119               apiVersion: v1
120               fieldPath: metadata.namespace
121         image: {{ include "repositoryGenerator.image.readiness" . }}
122         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
123         name: {{ include "common.name" . }}-readiness
124       - command:
125         - sh
126         args:
127         - -c
128         - |
129            bash docker-entrypoint.sh dataRestoreFromSnapshot.sh `ls -t /opt/app/aai-graphadmin/logs/data/dataSnapshots|head -1|awk -F".P" '{ print $1 }'`
130         env:
131         - name: LOCAL_USER_ID
132           value: {{ .Values.securityContext.user_id | quote }}
133         - name: LOCAL_GROUP_ID
134           value: {{ .Values.securityContext.group_id | quote }}
135         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
136         - mountPath: /etc/localtime
137           name: localtime
138           readOnly: true
139         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
140           name: config
141           subPath: janusgraph-realtime.properties
142         - mountPath: /opt/app/aai-graphadmin/logs/data/dataSnapshots
143           name: snapshots
144         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
145           name: config
146           subPath: janusgraph-cached.properties
147         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
148           name: properties
149           subPath: aaiconfig.properties
150         - mountPath: /opt/aai/logroot/AAI-GA
151           name: logs
152         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
153           name: config
154           subPath: logback.xml
155         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
156           name: config
157           subPath: localhost-access-logback.xml
158         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
159           name: properties
160           subPath: application.properties
161         image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
162         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
163         name: {{ include "common.name" . }}-restore-backup
164       containers:
165       - image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
166         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
167         name: {{ include "common.name" . }}-perform-migration
168         command:
169         - sh
170         args:
171         - -c
172         - |
173            bash docker-entrypoint.sh run_Migrations.sh -e UpdateAaiUriIndexMigration --commit --skipPreMigrationSnapShot --runDisabled RebuildAllEdges ;
174            {{- include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
175         env:
176         - name: LOCAL_USER_ID
177           value: {{ .Values.securityContext.user_id | quote }}
178         - name: LOCAL_GROUP_ID
179           value: {{ .Values.securityContext.group_id | quote }}
180         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
181         - mountPath: /etc/localtime
182           name: localtime
183           readOnly: true
184         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
185           name: config
186           subPath: janusgraph-realtime.properties
187         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
188           name: config
189           subPath: janusgraph-cached.properties
190         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
191           name: properties
192           subPath: aaiconfig.properties
193         - mountPath: /opt/aai/logroot/AAI-GA
194           name: logs
195         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
196           name: config
197           subPath: logback.xml
198         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
199           name: config
200           subPath: localhost-access-logback.xml
201         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
202           name: properties
203           subPath: application.properties
204         resources: {{ include "common.resources" . | nindent 10 }}
205       {{- if .Values.nodeSelector }}
206       nodeSelector: {{ toYaml .Values.nodeSelector | nindent 8 }}
207       {{- end }}
208       {{- if .Values.affinity }}
209       affinity: {{ toYaml .Values.affinity | nindent 8 }}
210       {{- end }}
211       volumes: {{ include "common.certInitializer.volumes" . | nindent 6 }}
212       - name: localtime
213         hostPath:
214           path: /etc/localtime
215       {{ include "common.log.volumes" (dict "dot" . "configMapNamePrefix" (tpl .Values.logConfigMapNamePrefix .)) | nindent 8 }}
216       - name: {{ include "common.fullname" . }}-logs
217         emptyDir: {}
218       - name: {{ include "common.fullname" . }}-config
219         configMap:
220           name: {{ include "common.fullname" . }}-configmap
221       - name: {{ include "common.fullname" . }}-snapshots
222         persistentVolumeClaim:
223           claimName: {{ include "common.fullname" . }}-migration
224       - name: properties-input
225         configMap:
226           name: {{ include "common.fullname" . }}-properties
227       - name: properties
228         emptyDir:
229           medium: Memory
230       restartPolicy: Never
231       imagePullSecrets:
232       - name: "{{ include "common.namespace" . }}-docker-registry-key"
233 ---
234 apiVersion: batch/v1
235 kind: Job
236 metadata:
237   name: {{ include "common.fullname" . }}-db-backup-job
238   namespace: {{ include "common.namespace" . }}
239   labels:
240     app: {{ include "common.name" . }}-db-backup-job
241     release: {{ include "common.release" . }}
242     heritage: {{ .Release.Service }}
243     chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
244   annotations:
245     "helm.sh/hook": pre-upgrade,pre-install
246     "helm.sh/hook-weight": "2"
247     "helm.sh/hook-delete-policy": before-hook-creation
248 spec:
249   backoffLimit: 20
250   template:
251     metadata:
252       labels:
253         app: {{ include "common.name" . }}-db-backup-job
254         release: {{ include "common.release" . }}
255       name: {{ include "common.name" . }}
256     spec:
257       initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
258       {{- if .Values.global.aafEnabled }}
259       - command:
260         - sh
261         args:
262         - -c
263         - |
264           echo "*** retrieve Truststore and Keystore password"
265           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
266           echo "*** obfuscate them "
267           export KEYSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.44.v20210927.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
268           export KEYSTORE_JKS_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.44.v20210927.jar org.eclipse.jetty.util.security.Password ${KEYSTORE_JKS_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
269           export TRUSTSTORE_PASSWORD=`java -cp /usr/local/jetty/lib/jetty-util-9.4.44.v20210927.jar org.eclipse.jetty.util.security.Password ${TRUSTSTORE_PLAIN_PASSWORD} 2>&1 | grep "OBF:"`
270           echo "KEYSTORE_PASSWORD=${KEYSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
271           echo "KEYSTORE_JKS_PASSWORD=${KEYSTORE_JKS_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
272           echo "TRUSTSTORE_PASSWORD=${TRUSTSTORE_PASSWORD}" >> {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop
273         image: {{ include "repositoryGenerator.image.jetty" . }}
274         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
275         name: {{ include "common.name" . }}-obfuscate
276         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
277         securityContext:
278           runAsUser: {{ .Values.securityContext.user_id }}
279       - command:
280         - sh
281         args:
282         - -c
283         - |
284           echo "*** Set obfuscated Truststore and Keystore password into configuration file"
285           export $(cat {{ .Values.certInitializer.appMountPath }}/local/mycreds.prop | xargs -0)
286           cd /config-input
287           for PFILE in `ls -1`
288           do
289             envsubst <${PFILE} >/config/${PFILE}
290           done
291         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
292         - mountPath: /config-input
293           name: properties-input
294         - mountPath: /config
295           name: properties
296         image: {{ include "repositoryGenerator.image.envsubst" . }}
297         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
298         name: {{ include "common.name" . }}-update-config
299       {{- end }}
300       {{ if eq .Values.global.jobs.migration.remoteCassandra.enabled false }}
301       - command:
302         - /bin/bash
303         - -c
304         - /app/ready.py --container-name aai-cassandra --timeout 1 || /app/ready.py --container-name cassandra
305         env:
306         - name: NAMESPACE
307           valueFrom:
308             fieldRef:
309               apiVersion: v1
310               fieldPath: metadata.namespace
311         image: {{ include "repositoryGenerator.image.readiness" . }}
312         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
313         name: {{ include "common.name" . }}-db-backup-readiness
314       {{- end }}
315       containers:
316       - name: {{ include "common.name" . }}-db-backup-job
317         image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
318         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
319         command:
320         - sh
321         args:
322         - -c
323         - |
324            bash docker-entrypoint.sh dataSnapshot.sh
325            {{- include "common.serviceMesh.killSidecar" . | indent 11 | trim }}
326         env:
327         - name: LOCAL_USER_ID
328           value: {{ .Values.securityContext.user_id | quote }}
329         - name: LOCAL_GROUP_ID
330           value: {{ .Values.securityContext.group_id | quote }}
331         volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
332         - mountPath: /etc/localtime
333           name: localtime
334           readOnly: true
335         - mountPath: /opt/app/aai-graphadmin/logs/data/dataSnapshots
336           name: snapshots
337         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-realtime.properties
338           name: migration
339           subPath: janusgraph-migration-real.properties
340         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/janusgraph-cached.properties
341           name: migration
342           subPath: janusgraph-migration-cached.properties
343         - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties
344           name: properties
345           subPath: aaiconfig.properties
346         - mountPath: /opt/aai/logroot/AAI-RES/
347           name: logs
348         - mountPath: /opt/app/aai-graphadmin/resources/logback.xml
349           name: config
350           subPath: logback.xml
351         - mountPath: /opt/app/aai-graphadmin/resources/localhost-access-logback.xml
352           name: config
353           subPath: localhost-access-logback.xml
354         - mountPath: /opt/app/aai-graphadmin/resources/application.properties
355           name: properties
356           subPath: application.properties
357         resources: {{ include "common.resources" . | nindent 10 }}
358       {{- if .Values.nodeSelector }}
359       nodeSelector: {{ toYaml .Values.nodeSelector | nindent 8 }}
360       {{- end }}
361       {{- if .Values.affinity }}
362       affinity: {{ toYaml .Values.affinity | nindent 8 }}
363       {{- end }}
364       volumes: {{ include "common.resources" . | nindent 10 }}
365       - name: localtime
366         hostPath:
367           path: /etc/localtime
368       - name: logs
369         emptyDir: {}
370       - name: config
371         configMap:
372           name: {{ include "common.fullname" . }}
373       - name: properties-input
374         configMap:
375           name: {{ include "common.fullname" . }}-properties
376       - name: properties
377         emptyDir:
378           medium: Memory
379       - name: migration
380         configMap:
381           name: {{ include "common.fullname" . }}-migration
382       - name: snapshots
383         persistentVolumeClaim:
384           claimName: {{ include "common.fullname" . }}-migration
385       restartPolicy: Never
386       imagePullSecrets:
387       - name: "{{ include "common.namespace" . }}-docker-registry-key"
388 {{ end }}