Merge "Change scenario to onap-vtp"
authorKrzysztof Kuzmicki <krzysztof.kuzmicki@nokia.com>
Fri, 22 Jan 2021 07:03:45 +0000 (07:03 +0000)
committerGerrit Code Review <gerrit@onap.org>
Fri, 22 Jan 2021 07:03:45 +0000 (07:03 +0000)
14 files changed:
plans/usecases-config-over-netconf/config-over-netconf/cds/cds_setup.sh [deleted file]
plans/usecases-config-over-netconf/config-over-netconf/cds/docker-compose.yaml
plans/usecases-config-over-netconf/config-over-netconf/cds/resources/application.properties [new file with mode: 0755]
plans/usecases-config-over-netconf/config-over-netconf/cds/resources/error-messages_en.properties [new file with mode: 0755]
plans/usecases-config-over-netconf/config-over-netconf/cds/resources/importCerAndStartService.sh [new file with mode: 0755]
plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/docker-compose.yml [new file with mode: 0755]
plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/data.json [new file with mode: 0644]
plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/model.yang [new file with mode: 0644]
plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/subscriber.py [new file with mode: 0755]
plans/usecases-config-over-netconf/config-over-netconf/setup.sh
plans/usecases-config-over-netconf/config-over-netconf/teardown.sh
plans/usecases-config-over-netconf/config-over-netconf/test.properties
tests/usecases-config-over-netconf/config-over-netconf/config_over_netconf.robot
tests/usecases-config-over-netconf/config-over-netconf/data/blueprint_archive.zip

diff --git a/plans/usecases-config-over-netconf/config-over-netconf/cds/cds_setup.sh b/plans/usecases-config-over-netconf/config-over-netconf/cds/cds_setup.sh
deleted file mode 100755 (executable)
index b595e6b..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-#   Copyright (C) 2019 Nordix Foundation.
-# ================================================================================
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-#
-#  SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=========================================================
-
-# @author Rahul Tyagi (rahul.tyagi@est.tech)
-
-CDS_DATA_PATH=$WORKSPACE/plans/$PARENT/$SUB_PARENT/cds
-
-cd $CDS_DATA_PATH
-export LOCAL_IP=$(ip -4 addr show docker0 | grep -Po 'inet \K[\d.]+')
-unset http_proxy https_proxy
-
-#cd $WORKSPACE/archives/cds/ms/blueprintsprocessor/distribution/src/main/dc/
-
-############# update ip of sdnc in docker-compose###########
-SDNC_CONTAINER=$(docker ps -a -q --filter="name=sdnc_controller_container")
-SDNC_CONTAINER_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $SDNC_CONTAINER)
-echo " " >> docker-compose.yaml
-echo "    extra_hosts:"  >> docker-compose.yaml
-echo "    - 'sdnc:$LOCAL_IP'" >> docker-compose.yaml
-#############################################################
-
-docker-compose up -d
-sleep 10
-################# Check state of BP ####################
-BP_CONTAINER=$(docker ps -a -q --filter="name=bp-rest")
-CCSDK_MARIADB=$(docker ps -a -q --filter="name=ccsdk-mariadb")
-for i in {1..10}; do
-if [ $(docker inspect --format='{{ .State.Running }}' $BP_CONTAINER) ] && \
-[ $(docker inspect --format='{{ .State.Running }}' $CCSDK_MARIADB) ]
-then
-   echo "Blueprint proc Service Running"
-   break
-else
-   echo sleep $i
-   sleep $i
-fi
-done
-
index 4834f91..f914e48 100755 (executable)
@@ -23,9 +23,17 @@ services:
       - "8000:8080"
     restart: always
     environment:
-      APPLICATIONNAME: BlueprintsProcessor
-      BUNDLEVERSION: 1.0.0
-      APP_CONFIG_HOME: /opt/app/onap/config
-      STICKYSELECTORKEY:
-      ENVCONTEXT: dev
+      - APPLICATIONNAME=BlueprintsProcessor
+      - BUNDLEVERSION=1.0.0
+      - APP_CONFIG_HOME=/opt/app/onap/config
+      - ENVCONTEXT=dev
+    volumes:
+      - /etc/localtime:/etc/localtime:ro
+      - ${WORKSPACE}/plans/usecases-config-over-netconf/config-over-netconf/cds/resources:/opt/app/onap/res
+    entrypoint:
+      - /bin/sh
+      - -c
+      - "/opt/app/onap/res/importCerAndStartService.sh"
+    extra_hosts:
+      - sdnc:${LOCAL_IP}
 
diff --git a/plans/usecases-config-over-netconf/config-over-netconf/cds/resources/application.properties b/plans/usecases-config-over-netconf/config-over-netconf/cds/resources/application.properties
new file mode 100755 (executable)
index 0000000..34d572e
--- /dev/null
@@ -0,0 +1,97 @@
+# Web Server Configurations
+# START -Controller Blueprints Properties & Load Resource Source Mappings
+resourceSourceMappings=processor-db=source-db,input=source-input,default=source-default,sdnc=source-rest,aai-data=source-rest,capability=source-capability,rest=source-rest,vault-data=source-rest,script=source-capability
+
+# Controller Blueprints Core Configuration
+blueprintsprocessor.blueprintDeployPath=/opt/app/onap/blueprints/deploy
+blueprintsprocessor.blueprintArchivePath=/opt/app/onap/blueprints/archive
+blueprintsprocessor.blueprintWorkingPath=/opt/app/onap/blueprints/working
+
+# Controller Blueprint Load Configurations
+blueprintsprocessor.loadBluePrintPaths=/opt/app/onap/model-catalog/blueprint-model
+blueprintsprocessor.loadModeTypePaths=/opt/app/onap/model-catalog/definition-type
+blueprintsprocessor.loadResourceDictionaryPaths=/opt/app/onap/model-catalog/resource-dictionary
+
+# CBA file extension
+controllerblueprints.loadCbaExtension=zip
+
+### END -Controller Blueprints Properties
+
+blueprintsprocessor.grpcEnable=true
+blueprintsprocessor.httpPort=8080
+blueprintsprocessor.grpcPort=9111
+
+# DB
+blueprintsprocessor.db.url=jdbc:mysql://db:3306/sdnctl
+blueprintsprocessor.db.username=sdnctl
+blueprintsprocessor.db.password=sdnctl
+blueprintsprocessor.db.driverClassName=org.mariadb.jdbc.Driver
+blueprintsprocessor.db.hibernateHbm2ddlAuto=update
+blueprintsprocessor.db.hibernateDDLAuto=update
+blueprintsprocessor.db.hibernateNamingStrategy=org.hibernate.cfg.ImprovedNamingStrategy
+blueprintsprocessor.db.hibernateDialect=org.hibernate.dialect.MySQL5InnoDBDialect
+
+# Processor-DB Endpoint
+blueprintsprocessor.db.processor-db.type=maria-db
+blueprintsprocessor.db.processor-db.url=jdbc:mysql://mariadb-galera:3306/sdnctl
+blueprintsprocessor.db.processor-db.username=root
+blueprintsprocessor.db.processor-db.password=secretpassword
+
+# Python Executor
+blueprints.processor.functions.python.executor.executionPath=/opt/app/onap/scripts/jython/ccsdk_blueprints
+blueprints.processor.functions.python.executor.modulePaths=/opt/app/onap/scripts/jython/ccsdk_blueprints,/opt/app/onap/scripts/jython/ccsdk_netconf,/opt/app/onap/scripts/jython/ccsdk_restconf
+
+security.user.password: {bcrypt}$2a$10$duaUzVUVW0YPQCSIbGEkQOXwafZGwQ/b32/Ys4R1iwSSawFgz7QNu
+security.user.name: ccsdkapps
+
+# Used in Health Check
+#endpoints.user.name=ccsdkapps
+#endpoints.user.password=ccsdkapps
+
+# Executor Options
+blueprintsprocessor.resourceResolution.enabled=true
+blueprintsprocessor.netconfExecutor.enabled=true
+blueprintsprocessor.restConfExecutor.enabled=true
+blueprintsprocessor.cliExecutor.enabled=true
+blueprintsprocessor.remoteScriptCommand.enabled=true
+
+# Command Executor
+blueprintsprocessor.grpcclient.remote-python.type=token-auth
+blueprintsprocessor.grpcclient.remote-python.host=localhost
+blueprintsprocessor.grpcclient.remote-python.port=50051
+blueprintsprocessor.grpcclient.remote-python.token=Basic Y2NzZGthcHBzOmNjc2RrYXBwcw==
+
+# Python Executor
+blueprintsprocessor.grpcclient.py-executor.type=tls-auth
+blueprintsprocessor.grpcclient.py-executor.host=py-executor-default:50052
+blueprintsprocessor.grpcclient.py-executor.trustCertCollection=/opt/app/onap/config/certs/py-executor/py-executor-chain.pem
+
+# Config Data REST client settings
+blueprintsprocessor.restconfEnabled=true
+blueprintsprocessor.restclient.sdnc.type=basic-auth
+blueprintsprocessor.restclient.sdnc.url=http://sdnc:8282
+blueprintsprocessor.restclient.sdnc.username=admin
+blueprintsprocessor.restclient.sdnc.password=Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
+blueprintprocessor.remoteScriptCommand.enabled=true
+
+# Encrypted username and password for health check service
+endpoints.user.name=eHbVUbJAj4AG2522cSbrOQ==
+endpoints.user.password=eHbVUbJAj4AG2522cSbrOQ==
+
+# BaseUrls for health check blueprint processor services
+blueprintprocessor.healthcheck.baseUrl=http://localhost:8080/
+blueprintprocessor.healthcheck.mapping-service-name-with-service-link=[Execution service,/api/v1/execution-service/health-check],[Resources service,/api/v1/resources/health-check],[Template service,/api/v1/template/health-check]
+
+# BaseUrls for health check Cds Listener services
+cdslistener.healthcheck.baseUrl=http://cds-sdc-listener:8080/
+cdslistener.healthcheck.mapping-service-name-with-service-link=[SDC Listener service,/api/v1/sdclistener/healthcheck]
+
+# Actuator Properties
+management.endpoints.web.exposure.include=*
+management.endpoint.health.show-details=always
+management.info.git.mode=full
+
+# Error Managements
+error.catalog.applicationId=cds
+error.catalog.type=properties
+error.catalog.errorDefinitionDir=/opt/app/onap/config/
\ No newline at end of file
diff --git a/plans/usecases-config-over-netconf/config-over-netconf/cds/resources/error-messages_en.properties b/plans/usecases-config-over-netconf/config-over-netconf/cds/resources/error-messages_en.properties
new file mode 100755 (executable)
index 0000000..3b731c7
--- /dev/null
@@ -0,0 +1,77 @@
+# Error Messages Configurations
+
+org.onap.ccsdk.cds.blueprintsprocessor.generic_failure=cause=Internal error in Blueprint Processor run time.,action=Contact CDS administrator team.
+org.onap.ccsdk.cds.blueprintsprocessor.resource_path_missing=cause=Resource path missing or wrong.,action=Please reload your artifact in run time.
+org.onap.ccsdk.cds.blueprintsprocessor.resource_writing_fail=cause=Fail to write resources files.,action=Please reload your files and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.io_file_interrupt=cause=IO file system interruption.,action=Please reload your file and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.invalid_request_format=cause=bad request provided.,action=Verify the request payload.
+org.onap.ccsdk.cds.blueprintsprocessor.unauthorized_request=cause=The request requires user authentication.,action=Please provide the right credentials.
+org.onap.ccsdk.cds.blueprintsprocessor.request_not_found=cause=Request mapping doesn't exist.,action=Please verify your request.
+org.onap.ccsdk.cds.blueprintsprocessor.conflict_adding_resource=cause=Duplicated entry while saving resource.,action=Please make the saving model doesn't exist.
+org.onap.ccsdk.cds.blueprintsprocessor.duplicate_data=cause=Duplicated data - was expecting one result, got more than one.,action=Please provide single resource at a time.
+org.onap.ccsdk.cds.blueprintsprocessor.resource_not_found=cause=No response was found for this request in the server.,action=Provide the ID to find the resource.
+org.onap.ccsdk.cds.blueprintsprocessor.unsupported_media_type=cause=An invalid media was provided.,action=Please make sure your media or artifact is in the proper structure or format.
+
+# Self Service API
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.generic_failure=cause=Internal error in Self Service API.,action=Verify the request and try again.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.generic_process_failure=cause=Internal error while processing REST call to the Self Service API.,action=Verify the request and try again.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.invalid_file_extension=cause=Failed trying to upload a non ZIP file format.,action=Please reload your file and make sure it is in ZIP format.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.resource_path_missing=cause=Resource path missing or wrong.,action=Please reload your artifact in run time.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.resource_writing_fail=cause=Fail to write resources files.,action=Please reload your files and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.io_file_interrupt=cause=IO file system interruption.,action=Please reload your file and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.invalid_request_format=cause=bad request provided.,action=Verify the request payload.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.unauthorized_request=cause=The request requires user authentication.,action=Please provide the right credentials.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.request_not_found=cause=Request mapping doesn't exist.,action=Please verify your request.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.conflict_adding_resource=cause=Duplicated entry while saving resource.,action=Please make the saving model doesn't exist.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.duplicate_data=cause=Duplicated data - was expecting one result, got more than one.,action=Please provide single resource at a time.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.resource_not_found=cause=No response was found for this request in the server.,action=Provide the ID to find the resource.
+org.onap.ccsdk.cds.blueprintsprocessor.selfservice.api.unsupported_media_type=cause=An invalid media was provided.,action=Please make sure your media or artifact is in the proper structure or format.
+
+# Designer API
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.generic_failure=cause=Internal error while processing REST call to the Designer API.,action=Verify the request and try again.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.invalid_file_extension=cause=Failed trying to upload a non ZIP file format.,action=Please reload your file and make sure it is in ZIP format.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.resource_path_missing=cause=Resource path missing or wrong.,action=Please reload your artifact in run time.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.resource_writing_fail=cause=Fail to write resources files.,action=Please reload your files and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.io_file_interrupt=cause=IO file system interruption.,action=Please reload your file and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.invalid_request_format=cause=bad request provided.,action=Verify the request payload.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.unauthorized_request=cause=The request requires user authentication.,action=Please provide the right credentials.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.request_not_found=cause=Request mapping doesn't exist.,action=Please verify your request.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.conflict_adding_resource=cause=Duplicated entry while saving resource.,action=Please make the saving model doesn't exist.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.duplicate_data=cause=Duplicated data - was expecting one result, got more than one.,action=Please provide single resource at a time.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.resource_not_found=cause=No response was found for this request in the server.,action=Provide the ID to find the resource.
+org.onap.ccsdk.cds.blueprintsprocessor.designer.api.unsupported_media_type=cause=An invalid media was provided.,action=Please make sure your media or artifact is in the proper structure or format.
+
+# Resource API
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.generic_failure=cause=Internal error while processing REST call to the Resource API.,action=Verify the request and try again.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.invalid_file_extension=cause=Failed trying to upload a non ZIP file format.,action=Please reload your file and make sure it is in ZIP format.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.resource_path_missing=cause=Resource path missing or wrong.,action=Please reload your artifact in run time.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.resource_writing_fail=cause=Fail to write resources files.,action=Please reload your files and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.io_file_interrupt=cause=IO file system interruption.,action=Please reload your file and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.invalid_request_format=cause=bad request provided.,action=Verify the request payload.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.unauthorized_request=cause=The request requires user authentication.,action=Please provide the right credentials.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.request_not_found=cause=Request mapping doesn't exist.,action=Please verify your request.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.conflict_adding_resource=cause=Duplicated entry while saving resource.,action=Please make the saving model doesn't exist.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.duplicate_data=cause=Duplicated data - was expecting one result, got more than one.,action=Please provide single resource at a time.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.resource_not_found=cause=No response was found for this request in the server.,action=Provide the ID to find the resource.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.api.unsupported_media_type=cause=An invalid media was provided.,action=Please make sure your media or artifact is in the proper structure or format.
+
+# Configs API
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.generic_failure=cause=Internal error while processing REST call to the Configs API.,action=Verify the request and try again.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.resource_path_missing=cause=Resource path missing or wrong.,action=Please reload your artifact in run time.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.io_file_interrupt=cause=IO file system interruption.,action=Please reload your file and make sure it is in the right format.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.invalid_request_format=cause=bad request provided.,action=Verify the request payload.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.unauthorized_request=cause=The request requires user authentication.,action=Please provide the right credentials.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.request_not_found=cause=Request mapping doesn't exist.,action=Please verify your request.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.conflict_adding_resource=cause=Duplicated entry while saving resource.,action=Please make the saving model doesn't exist.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.duplicate_data=cause=Duplicated data - was expecting one result, got more than one.,action=Please provide single resource at a time.
+org.onap.ccsdk.cds.blueprintsprocessor.configs.api.resource_not_found=cause=No response was found for this request in the server.,action=Provide the ID to find the resource.
+
+# Python Executor
+org.onap.ccsdk.cds.blueprintsprocessor.functions.python.executor.generic_failure=cause=Internal error in Blueprint Processor run time.,action=Contact CDS administrator team.
+
+# Resource resolution
+org.onap.ccsdk.cds.blueprintsprocessor.resource.resolution.invalid_request_format=cause=bad request provided.,action=Verify the request payload.
+org.onap.ccsdk.cds.blueprintsprocessor.resource.resolution.resource_not_found=cause=No response was found for this resolution in CDS.,action=Verify definition of the resource in CBA. 
+org.onap.ccsdk.cds.blueprintsprocessor.resource.resolution.internal_error=cause=Internal error while processing Resource Resolution.,action=Verify the payload.
+
+org.onap.ccsdk.cds.sdclistener.generic_failure=cause=Internal error in SDC Listener.,action=Contact CDS administrator team.
\ No newline at end of file
diff --git a/plans/usecases-config-over-netconf/config-over-netconf/cds/resources/importCerAndStartService.sh b/plans/usecases-config-over-netconf/config-over-netconf/cds/resources/importCerAndStartService.sh
new file mode 100755 (executable)
index 0000000..b581606
--- /dev/null
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+chmod -R 775 /opt/app/onap/res
+cp -f /opt/app/onap/res/application.properties /opt/app/onap/config
+cp -f /opt/app/onap/res/error-messages_en.properties /opt/app/onap/config
+
+echo "Starting Service..."
+source /startService.sh
\ No newline at end of file
diff --git a/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/docker-compose.yml b/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/docker-compose.yml
new file mode 100755 (executable)
index 0000000..d8e723b
--- /dev/null
@@ -0,0 +1,12 @@
+version: '3'
+
+services:
+  netconf-pnp-simulator:
+    image: nexus3.onap.org:10001/onap/integration/simulators/netconf-pnp-simulator:2.8.6
+    container_name: netconf-simulator
+    restart: always
+    ports:
+      - "830:830"
+      - "6513:6513"
+    volumes:
+      - ${NETCONF_CONFIG_PATH}:/config/modules/mynetconf
diff --git a/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/data.json b/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/data.json
new file mode 100644 (file)
index 0000000..63872ee
--- /dev/null
@@ -0,0 +1,10 @@
+{
+  "mynetconf:netconflist": {
+    "netconf": [
+      {
+        "netconf-id": 3,
+        "netconf-param": 3
+      }
+    ]
+  }
+}
diff --git a/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/model.yang b/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/model.yang
new file mode 100644 (file)
index 0000000..6c8c36a
--- /dev/null
@@ -0,0 +1,29 @@
+module mynetconf {
+    yang-version 1.1;
+    namespace "urn:mynetconf:test";
+
+    prefix nft;
+
+    organization
+      "mynetconf";
+    contact
+      "my netconf address";
+    description
+      "yang model for mynetconf";
+    revision "2019-03-01" {
+        description
+          "initial version";
+    }
+
+    container netconflist {
+        list netconf {
+            key netconf-id;
+            leaf netconf-id {
+                type uint16;
+            }
+            leaf netconf-param {
+                type uint32;
+            }
+        }
+    }
+}
diff --git a/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/subscriber.py b/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config/subscriber.py
new file mode 100755 (executable)
index 0000000..6127296
--- /dev/null
@@ -0,0 +1,136 @@
+#!/usr/bin/env python3
+
+__author__ = "Mislav Novakovic <mislav.novakovic@sartura.hr>"
+__copyright__ = "Copyright 2018, Deutsche Telekom AG"
+__license__ = "Apache 2.0"
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This sample application demonstrates use of Python programming language bindings for sysrepo library.
+# Original c application was rewritten in Python to show similarities and differences
+# between the two.
+#
+# Most notable difference is in the very different nature of languages, c is weakly statically typed language
+# while Python is strongly dynamically typed. Python code is much easier to read and logic easier to comprehend
+# for smaller scripts. Memory safety is not an issue but lower performance can be expected.
+#
+# The original c implementation is also available in the source, so one can refer to it to evaluate trade-offs.
+
+import sysrepo as sr
+import sys
+
+
+# Helper function for printing changes given operation, old and new value.
+def print_change(op, old_val, new_val):
+    if op == sr.SR_OP_CREATED:
+        print(f"CREATED: {new_val.to_string()}")
+    elif op == sr.SR_OP_DELETED:
+        print(f"DELETED: {old_val.to_string()}")
+    elif op == sr.SR_OP_MODIFIED:
+        print(f"MODIFIED: {old_val.to_string()} to {new_val.to_string()}")
+    elif op == sr.SR_OP_MOVED:
+        print(f"MOVED: {new_val.xpath()} after {old_val.xpath()}")
+
+
+# Helper function for printing events.
+def ev_to_str(ev):
+    if ev == sr.SR_EV_VERIFY:
+        return "verify"
+    elif ev == sr.SR_EV_APPLY:
+        return "apply"
+    elif ev == sr.SR_EV_ABORT:
+        return "abort"
+    else:
+        return "unknown"
+
+
+# Function to print current configuration state.
+# It does so by loading all the items of a session and printing them out.
+def print_current_config(session, module_name):
+    select_xpath = f"/{module_name}:*//*"
+
+    values = session.get_items(select_xpath)
+
+    if values is not None:
+        print("========== BEGIN CONFIG ==========")
+        for i in range(values.val_cnt()):
+            print(values.val(i).to_string(), end='')
+        print("=========== END CONFIG ===========")
+
+
+# Function to be called for subscribed client of given session whenever configuration changes.
+def module_change_cb(sess, module_name, event, private_ctx):
+    try:
+        print("========== Notification " + ev_to_str(event) + " =============================================")
+        if event == sr.SR_EV_APPLY:
+            print_current_config(sess, module_name)
+
+        print("========== CHANGES: =============================================")
+
+        change_path = f"/{module_name}:*"
+
+        it = sess.get_changes_iter(change_path)
+
+        while True:
+            change = sess.get_change_next(it)
+            if change is None:
+                break
+            print_change(change.oper(), change.old_val(), change.new_val())
+
+        print("========== END OF CHANGES =======================================")
+    except Exception as e:
+        print(e)
+
+    return sr.SR_ERR_OK
+
+
+def main():
+    # Notable difference between c implementation is using exception mechanism for open handling unexpected events.
+    # Here it is useful because `Connection`, `Session` and `Subscribe` could throw an exception.
+    try:
+        module_name = "ietf-interfaces"
+        if len(sys.argv) > 1:
+            module_name = sys.argv[1]
+        else:
+            print("\nYou can pass the module name to be subscribed as the first argument")
+
+        print(f"Application will watch for changes in {module_name}")
+
+        # connect to sysrepo
+        conn = sr.Connection(module_name)
+
+        # start session
+        sess = sr.Session(conn)
+
+        # subscribe for changes in running config */
+        subscribe = sr.Subscribe(sess)
+
+        subscribe.module_change_subscribe(module_name, module_change_cb)
+
+        try:
+            print_current_config(sess, module_name)
+        except Exception as e:
+            print(e)
+
+        print("========== STARTUP CONFIG APPLIED AS RUNNING ==========")
+
+        sr.global_loop()
+
+        print("Application exit requested, exiting.")
+
+    except Exception as e:
+        print(e)
+
+
+if __name__ == '__main__':
+    main()
index fcedbec..2e61da0 100644 (file)
 
 # @author Rahul Tyagi (rahul.tyagi@est.tech)
 
-
-SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-export PARENT=usecases-config-over-netconf
-export SUB_PARENT=config-over-netconf
-source ${WORKSPACE}/plans/$PARENT/$SUB_PARENT/test.properties
+SCRIPTS="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+source "${WORKSPACE}"/plans/usecases-config-over-netconf/config-over-netconf/test.properties
 
 export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
 
 if [ "$MTU" == "" ]; then
-         export MTU="1450"
+  export MTU="1450"
 fi
 
-# clone integration branch for pnf-simulator
-mkdir -m 755 -p $WORKSPACE/temp/integration
-cd $WORKSPACE/temp
-git clone -b dublin --single-branch --depth=1 http://gerrit.onap.org/r/integration.git integration
-
-HOST_IP_ADDR=localhost
+export CONFIG_OVER_NETCONF=${CONFIG_OVER_NETCONF}
 
-# setup sdnc
+# Prepare enviroment
+echo "Uninstall docker-py and reinstall docker."
+pip uninstall -y docker-py
+pip uninstall -y docker
+pip install -U docker==2.7.0
 
-cd $SDNC_DOCKER_PATH
+# Disable Proxy - for local run
 unset http_proxy https_proxy
 
-docker pull $NETOPEER_DOCKER_REPO:$NETOPEER_IMAGE_TAG
-docker tag  $NETOPEER_DOCKER_REPO:$NETOPEER_IMAGE_TAG $NETOPEER_DOCKER_REPO:latest
-#sed -i "s/DMAAP_TOPIC_ENV=.*/DMAAP_TOPIC_ENV="AUTO"/g" diocker-compose.yml
-docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+# Export default Networking bridge created on the host machine
+export LOCAL_IP=$(ip -4 addr show docker0 | grep -Po 'inet \K[\d.]+')
 
-docker pull $NEXUS_DOCKER_REPO/onap/sdnc-image:$SDNC_IMAGE_TAG
-docker tag $NEXUS_DOCKER_REPO/onap/sdnc-image:$SDNC_IMAGE_TAG onap/sdnc-image:latest
+###################### Netconf-PNP-Simulator Setup ######################
 
-docker pull $NEXUS_DOCKER_REPO/onap/sdnc-ansible-server-image:$ANSIBLE_IMAGE_TAG
-docker tag $NEXUS_DOCKER_REPO/onap/sdnc-ansible-server-image:$ANSIBLE_IMAGE_TAG onap/sdnc-ansible-server-image:latest
+# Export Netconf-Pnp Simulator conf path
+export NETCONF_CONFIG_PATH
 
-docker pull $NEXUS_DOCKER_REPO/onap/ccsdk-blueprintsprocessor:$BP_IMAGE_TAG
-docker tag $NEXUS_DOCKER_REPO/onap/ccsdk-blueprintsprocessor:$BP_IMAGE_TAG onap/ccsdk-blueprintsprocessor:latest
+# Start N etconf-Pnp-Simulator Container with docker-compose and configuration from docker-compose.yml
+docker-compose -f "${CONFIG_OVER_NETCONF}"/netconf-pnp-simulator/docker-compose.yml up -d
 
-export SDNC_CERT_PATH=${CERT_SUBPATH}
-#sed -i 's/sdnc_controller_container/sdnc_controller_container\n    volumes: \n      - $SDNC_CERT_PATH:\/opt\/opendaylight\/current\/certs/' docker-compose.yaml
-# start SDNC containers with docker compose and configuration from docker-compose.yml
-docker-compose up -d
+# Update default Networking bridge IP in mount.json file
+sed -i "s/pnfaddr/${LOCAL_IP}/g" "${REQUEST_DATA_PATH}"/mount.xml
 
-# start pnf simulator
+############################## SDNC Setup ##############################
 
-cd $INT_DOCKER_PATH
+export SDNC_CERT_PATH="${CERT_SUBPATH}"
 
-./simulator.sh start&
+docker pull "${NEXUS_DOCKER_REPO}"/onap/sdnc-image:"${SDNC_IMAGE_TAG}"
+docker tag "${NEXUS_DOCKER_REPO}"/onap/sdnc-image:"${SDNC_IMAGE_TAG}" onap/sdnc-image:latest
 
-# WAIT 10 minutes maximum and test every 5 seconds if SDNC is up using HealthCheck API
-TIME_OUT=1000
-INTERVAL=30
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-  response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck );
-  echo $response
+docker pull "${NEXUS_DOCKER_REPO}"/onap/sdnc-ansible-server-image:"${ANSIBLE_IMAGE_TAG}"
+docker tag "${NEXUS_DOCKER_REPO}"/onap/sdnc-ansible-server-image:"${ANSIBLE_IMAGE_TAG}" onap/sdnc-ansible-server-image:latest
 
-  if [ "$response" == "200" ]; then
-    echo SDNC started in $TIME seconds
-    break;
-  fi
+docker-compose -f "${CONFIG_OVER_NETCONF}"/sdn/docker-compose.yaml up -d
 
-  echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
+# Check if SDNC Service is healthy and ready
+for i in {1..10}; do
+  SDNC_IP=$(get-instance-ip.sh sdnc_controller_container)
+  RESP_CODE=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck)
+  if [[ "${RESP_CODE}" == '200' ]]; then
+    echo "SDNC Service is Ready."
+    break
+  fi
+  echo "Waiting for SDNC Service to Start Up..."
+  sleep 2m
 done
 
-export LOCAL_IP=$(ip -4 addr show docker0 | grep -Po 'inet \K[\d.]+')
-sed -i "s/pnfaddr/$LOCAL_IP/g" $REQUEST_DATA_PATH/mount.xml
+if [[ "${SDNC_IP}" == 'none' || "${SDNC_IP}" == '' || "${RESP_CODE}" != '200' ]]; then
+  echo "SDNC Service not started Could cause problems for testing activities...!"
+fi
 
+############################## CDS Setup ##############################
 
-if [ "$TIME" -ge "$TIME_OUT" ]; then
-   echo TIME OUT: karaf session not started in $TIME_OUT seconds... Could cause problems for testing activities...
-fi
+docker pull "${NEXUS_DOCKER_REPO}"/onap/ccsdk-blueprintsprocessor:"${BP_IMAGE_TAG}"
+docker tag "${NEXUS_DOCKER_REPO}"/onap/ccsdk-blueprintsprocessor:"${BP_IMAGE_TAG}" onap/ccsdk-blueprintsprocessor:latest
 
-########################################## blueprintsprocessor setup ##########################################################
-source $CDS_DOCKER_PATH/cds_setup.sh
+docker-compose -f "${CONFIG_OVER_NETCONF}"/cds/docker-compose.yaml up -d
 
-########## update pnf simulator ip in config deploy request ########
+echo "Sleeping 1 minute"
+sleep 1m
 
-NETOPEER_CONTAINER=$(docker ps -a -q --filter="name=netopeer")
-NETOPEER_CONTAINER_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $SDNC_CONTAINER)
-RES_KEY=$(uuidgen -r)
-sed -i "s/pnfaddr/$LOCAL_IP/g" $REQUEST_DATA_PATH/config-deploy.json
-sed -i "s/pnfaddr/$LOCAL_IP/g" $REQUEST_DATA_PATH/config-assign.json
+BP_CONTAINER=$(docker ps -a -q --filter="name=bp-rest")
+CCSDK_MARIADB=$(docker ps -a -q --filter="name=ccsdk-mariadb")
 
-sed -i "s/reskey/$RES_KEY/g" $REQUEST_DATA_PATH/config-deploy.json
-sed -i "s/reskey/$RES_KEY/g" $REQUEST_DATA_PATH/config-assign.json
+for i in {1..10}; do
+  if [ $(docker inspect --format='{{ .State.Running }}' "${BP_CONTAINER}") ] &&
+    [ $(docker inspect --format='{{ .State.Running }}' "${CCSDK_MARIADB}") ]; then
+    echo "Blueprint Proc Service Running"
+    break
+  else
+    echo sleep "${i}"
+    sleep "${i}"
+  fi
+done
 
-#########################check if server is up gracefully ######################################
+############################ Update Setup ############################
 
-# Sleep additional 3 minutes (180 secs) to give application time to finish
+RES_KEY=$(uuidgen -r)
+sed -i "s/pnfaddr/$LOCAL_IP/g" "${REQUEST_DATA_PATH}"/config-deploy.json
+sed -i "s/pnfaddr/$LOCAL_IP/g" "${REQUEST_DATA_PATH}"/config-assign.json
 
-sleep 150
+sed -i "s/reskey/$RES_KEY/g" "${REQUEST_DATA_PATH}"/config-deploy.json
+sed -i "s/reskey/$RES_KEY/g" "${REQUEST_DATA_PATH}"/config-assign.json
 
 # Pass any variables required by Robot test suites in ROBOT_VARIABLES
-
-ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS}"
+REPO_IP='127.0.0.1'
+ROBOT_VARIABLES+=" -v REPO_IP:${REPO_IP} "
+ROBOT_VARIABLES+=" -v SCRIPTS:${SCRIPTS} "
\ No newline at end of file
index 9613e3e..7257b36 100755 (executable)
@@ -1,18 +1,10 @@
 #!/bin/bash
 
-SDNC_DOCKER_COMPOSE_PATH=$SDNC_DOCKER_PATH/docker-compose.yaml
-PNFSIM_DOCKER_COMPOSE_PATH=$INT_DOCKER_PATH/docker-compose.yml
-CDS_DOCKER_COMPOSE_PATH=$CDS_DOCKER_PATH/docker-compose.yaml
+echo 'Stop, Removing all running containers...'
+docker stop $(docker ps -aq) && docker rm $(docker ps -aq)
 
-echo "==========================blueprint-processor logs =================================="
-docker logs bp-rest
+echo 'Removing Volumes...'
+echo y | docker volume prune
 
-echo "==========================sdnc-controller logs ======================================"
-docker logs sdnc_controller_container
-
-
-docker-compose -f $SDNC_DOCKER_COMPOSE_PATH down
-docker-compose -f $PNFSIM_DOCKER_COMPOSE_PATH down
-docker-compose -f $CDS_DOCKER_COMPOSE_PATH down
-
-rm -rf $WORKSPACE/temp
+echo 'Removing Networks...'
+echo y | docker network prune
\ No newline at end of file
index ee00246..4e4c99b 100644 (file)
@@ -1,14 +1,10 @@
 NEXUS_DOCKER_REPO=nexus3.onap.org:10001
 NEXUS_USERNAME=docker
 NEXUS_PASSWD=docker
+BP_IMAGE_TAG=0.7.1
 SDNC_IMAGE_TAG=1.7.6
 ANSIBLE_IMAGE_TAG=1.7.6
-BP_IMAGE_TAG=0.6.4
-REQUEST_DATA_PATH=$WORKSPACE/tests/$PARENT/$SUB_PARENT/data
-TC_PLANS_PATH=$WORKSPACE/plans/$PARENT/$SUB_PARENT
-CDS_DOCKER_PATH=$TC_PLANS_PATH/cds
-SDNC_DOCKER_PATH=$TC_PLANS_PATH/sdn
-INT_DOCKER_PATH=$WORKSPACE/temp/integration/test/mocks/pnfsimulator
-CERT_SUBPATH=$TC_PLANS_PATH/certs
-NETOPEER_DOCKER_REPO=sysrepo/sysrepo-netopeer2
-NETOPEER_IMAGE_TAG=v0.7.7
+CERT_SUBPATH=${WORKSPACE}/plans/usecases-config-over-netconf/config-over-netconf/certs
+CONFIG_OVER_NETCONF=${WORKSPACE}/plans/usecases-config-over-netconf/config-over-netconf
+REQUEST_DATA_PATH=${WORKSPACE}/tests/usecases-config-over-netconf/config-over-netconf/data
+NETCONF_CONFIG_PATH=${WORKSPACE}/plans/usecases-config-over-netconf/config-over-netconf/netconf-pnp-simulator/netconf-config
\ No newline at end of file
index 21c03c6..e7d923f 100644 (file)
@@ -9,7 +9,7 @@ Library     String
 ${SDNC_KEYSTORE_CONFIG_PATH}    /config/netconf-keystore:keystore
 ${SDNC_MOUNT_PATH}    /config/network-topology:network-topology/topology/topology-netconf/node/pnf-simulator
 ${PNFSIM_MOUNT_PATH}    /config/network-topology:network-topology/topology/topology-netconf/node/pnf-simulator/yang-ext:mount/mynetconf:netconflist
-${BP_UPLOAD_URL}    /api/v1/execution-service/upload
+${BP_UPLOAD_URL}    /api/v1/blueprint-model/publish
 ${BP_PROCESS_URL}    /api/v1/execution-service/process
 ${BP_ARCHIVE_PATH}    ${CURDIR}/data/blueprint_archive.zip
 
index ac34655..642c85f 100644 (file)
Binary files a/tests/usecases-config-over-netconf/config-over-netconf/data/blueprint_archive.zip and b/tests/usecases-config-over-netconf/config-over-netconf/data/blueprint_archive.zip differ