+++ /dev/null
-#!/bin/bash
-#
-# Copyright 2016-2017 Huawei Technologies Co., Ltd.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# Modifications copyright (c) 2017 AT&T Intellectual Property
-#
-# Place the scripts in run order:
-
-
-source ${WORKSPACE}/scripts/vvp/clone_and_setup_vvp_data.sh
-
-source ${WORKSPACE}/scripts/vvp/start_vvp_containers.sh
-
-source ${WORKSPACE}/scripts/vvp/docker_health.sh
-
-source ${WORKSPACE}/scripts/vvp/start_vvp_sanity.sh
-
-
-VVP_IP=`${WORKSPACE}/scripts/get-instance-ip.sh vvp-engagementmgr`
-echo VVP_IP=${VVP_IP}
-
-
-# Pass any variables required by Robot test suites in ROBOT_VARIABLES
-ROBOT_VARIABLES="-v VVP_IP:${VVP_IP}"
+++ /dev/null
-#!/bin/bash
-#
-# Copyright 2016-2017 Huawei Technologies Co., Ltd.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# Modifications copyright (c) 2017 AT&T Intellectual Property
-#
-
-source ${WORKSPACE}/scripts/vvp/kill_containers_and_remove_dataFolders.sh
+++ /dev/null
-# Test suites are relative paths under [integration/csit.git]/tests/.
-# Place the suites in run order.
-vvp/sanity
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# ONAP CLAMP
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END============================================
-# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-echo "This is ${WORKSPACE}/scripts/vvp/clone_and_setup_vvp_data.sh"
-
-# Clone vvp enviroment template
-mkdir -p ${WORKSPACE}/data/environments/
-mkdir -p ${WORKSPACE}/data/clone/
-mkdir -p /opt/configmaps/settings/
-
-cd ${WORKSPACE}/data/clone
-git clone --depth 1 http://gerrit.onap.org/r/vvp/engagementmgr -b master
-
-chmod -R 775 ${WORKSPACE}/data/
-
-# copy settings file from tox environment infrastructure:
-cp -f ${WORKSPACE}/data/clone/engagementmgr/django/vvp/settings/tox_settings.py /opt/configmaps/settings/__init__.py
-
-# uwsgi.ini file creation
-echo "[uwsgi]
-http = :80
-plugin = python
-chdir = /srv
-module = vvp.wsgi:application
-master = True
-pidfile = /tmp/project-master.pid
-vacuum = True
-max-requests = 5000
-enable-threads = True
-stats = 0.0.0.0:9000
-stats-http = True" > /opt/configmaps/settings/uwsgi.ini
-
-# storage.py file creation
-echo "from storages.backends.s3boto import S3BotoStorage
-from django.conf import settings
-class S3StaticStorage(S3BotoStorage):
- custom_domain = '%s/%s' % (settings.AWS_S3_HOST, settings.STATIC_BUCKET)
- bucket_name = settings.STATIC_BUCKET
-class S3MediaStorage(S3BotoStorage):
- custom_domain = '%s/%s' % (settings.AWS_S3_HOST, settings.MEDIA_BUCKET)
- bucket_name = settings.MEDIA_BUCKET" > /opt/configmaps/settings/storage.py
-
-# envbool.py file creation
-echo "import os
-def envbool(key, default=False, unknown=True):
- return {'true': True, '1': True, 'false': False, '0': False,
- '': default,}.get(os.getenv(key, '').lower(), unknown)" > /opt/configmaps/settings/envbool.py
-
-# vvp_env.list file creation
-echo "# set enviroment variables
-OAUTHLIB_INSECURE_TRANSPORT=1
-HOST_IP=${IP}
-ENVNAME=${ENVIRONMENT}
-http_proxy=${http_proxy}
-https_proxy=${https_proxy}
-no_proxy=${no_proxy}
-DJANGO_SETTINGS_MODULE=vvp.settings
-# export PYTHONPATH={pwd}
-SECRET_KEY=6mo22&FAKEFALEFALEFKEuq0u*4ksk^aq8lte&)yul
-ENVIRONMENT=development
-SERVICE_PROVIDER=ExampleProvider
-PROGRAM_NAME=VVP
-PROGRAM_NAME_URL_PREFIX=vvp
-SERVICE_PROVIDER_DOMAIN=example-domain.com
-EMAIL_HOST=localhost
-EMAIL_HOST_PASSWORD=
-EMAIL_HOST_USER=
-EMAIL_PORT=25
-PGDATABASE=icedb
-PGUSER=iceuser
-PGPASSWORD=Aa123456
-PGHOST=localhost
-PGPORT=5433
-SECRET_WEBHOOK_TOKEN=AiwiFAKEFAKEFAKEmahch2zahshaGi
-SECRET_GITLAB_AUTH_TOKEN=ieNgFAKEFAKE4zohvee9a
-SECRET_JENKINS_PASSWORD=xaiyiFAKEFAKEqueuBu
-SECRET_CMS_APP_CLIENT_ID=MHmJo0ccDhFAKEFAKEFAKEPAC6H6HAMzhCCM16
-SECRET_CMS_APP_CLIENT_SECRET=nI8QFAKEEEpnw5nTs
-SLACK_API_TOKEN=
-S3_HOST=localhost
-S3_PORT=443
-AWS_ACCESS_KEY_ID=FD2FAKEFAKEFAKEVD1MWRN
-AWS_SECRET_ACCESS_KEY=TKoiwxzFAKEFAKEFAKEFAKEFAKEQ27nP2lCiutEsD
-STATIC_ROOT=/app/htdocs" > ${WORKSPACE}/data/environments/vvp_env.list
-
-ifconfig
-
-IP_ADDRESS=`ip route get 8.8.8.8 | awk '/src/{ print $7 }'`
-export HOST_IP=$IP_ADDRESS
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# ONAP CLAMP
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END============================================
-# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-echo "VVP-Engagement-Manager health-Check:"
-echo ""
-echo ""
-res=`curl -s -X GET -H "Accept: application/json" -H "Content-Type: application/json" "http://localhost:9090/vvp/v1/engmgr/vendors" | wc -w`
-if [ ${res} == 0 ]; then
- echo "Error [${res}] while performing vvp engagement manager vendor existance check"
- exit 1
-fi
-echo "check vvp engagement manager vendor existance: OK [${res}]"
+++ /dev/null
-#!/bin/bash
-#
-# Copyright 2016-2017 Huawei Technologies Co., Ltd.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# Modifications copyright (c) 2017 AT&T Intellectual Property
-#
-
-echo "This is ${WORKSPACE}/scripts/vvp/kill_and_remove_dataFolder.sh"
-
-
-CONTAINER_NAME="vvp-engagementmgr"
-
-#kill and remove all vvp dockers
-docker stop $CONTAINER_NAME
-docker rm -f $CONTAINER_NAME
-
-
-#delete data folder
-rm -rf ${WORKSPACE}/data/*
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# ONAP CLAMP
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END============================================
-# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-echo "This is ${WORKSPACE}/scripts/vvp/start_vvp_containers.sh"
-
-export IP=$HOST_IP
-export PREFIX='nexus3.onap.org:10001/openecomp/vvp'
-export RELEASE='latest'
-
-#start Engagement Manager pod:
-docker run \
---detach \
---entrypoint="" \
---name vvp-engagementmgr \
---env-file ${WORKSPACE}/data/environments/vvp_env.list \
---log-driver=json-file \
---log-opt max-size=100m \
---log-opt max-file=10 \
---ulimit memlock=-1:-1 \
---memory 4g \
---memory-swap=4g \
---ulimit nofile=4096:100000 \
---volume /etc/localtime:/etc/localtime:ro \
---volume /opt/configmaps/settings:/opt/configmaps/settings/ \
---publish 9090:80 ${PREFIX}/engagementmgr:${RELEASE}
-
-docker cp /opt/configmaps/settings/uwsgi.ini vvp-engagementmgr:/srv/vvp/settings/
-
-echo "please wait while Engagement Manager is starting..."
-echo ""
-c=60 # seconds to wait
-REWRITE="\e[25D\e[1A\e[K"
-while [ $c -gt 0 ]; do
- c=$((c-1))
- sleep 1
- echo -e "${REWRITE}$c"
-done
-echo -e ""
-
-#run migration again:
-docker exec -d vvp-engagementmgr sh -c "python3 /srv/manage.py migrate"
-
-#run initial populate db again:
-docker exec -d vvp-engagementmgr sh -c "python3 /srv/manage.py initial_populate_db"
-
-
-echo "Will copy the generated DB sqlite3 file into the application directory in 30 seconds..."
-sleep 30
-#copy the generated DB sqlite3 file into the application directory:
-docker exec -d vvp-engagementmgr sh -c "cp emdb.db /srv/emdb.db -f"
-
-TIME_OUT=600
-INTERVAL=5
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
- response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:9090/vvp/v1/engmgr/vendors); echo $response
-
- if [ "$response" == "200" ]; then
- echo VVP-Engagement-Manager well started in $TIME seconds
- break;
- fi
-
- echo Sleep: $INTERVAL seconds before testing if VVP-Engagement-Manager is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
- sleep $INTERVAL
- TIME=$(($TIME+$INTERVAL))
-done
-
-if [ "$TIME" -ge "$TIME_OUT" ]; then
- echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
-else
- echo "Done starting vvp containers!"
-fi
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# ONAP CLAMP
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END============================================
-# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-
-# will run CI for sanity checks
+++ /dev/null
-*** Settings ***
-Documentation VVP - HealthCheck
+++ /dev/null
-*** Settings ***
-Library Collections
-Library OperatingSystem
-Library RequestsLibrary
-Library json
-
-# http://localhost:9090/vvp/v1/engmgr/vendors
-# vvp-engagementmgr
-
-*** Test Cases ***
-Get Requests health check ok
- [Tags] get
- CreateSession vvp-engagementmgr http://localhost:9090
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
- ${resp}= Get Request vvp-engagementmgr /vvp/v1/engmgr/vendors headers=&{headers}
- Should Be Equal As Strings ${resp.status_code} 200
- @{ITEMS}= Copy List ${resp.json()}
- : FOR ${ELEMENT} IN @{ITEMS}
- \ Log ${ELEMENT['uuid']} ${ELEMENT['name']}
Code Review / integration / csit.git / commitdiff