DMaaP DR adding props files

Change-Id: I6980e58c3c0bb8d3e0b3903bccfd604398562e7a
Issue-ID: DMAAP-1016
Signed-off-by: efiacor <fiachra.corcoran@est.tech>

diff --git a/plans/dmaap-datarouter/dr-suite/docker-compose/node.properties b/plans/dmaap-datarouter/dr-suite/docker-compose/node.properties
new file mode 100644 (file)
index 0000000..62b0f82
--- /dev/null
+++ b/plans/dmaap-datarouter/dr-suite/docker-compose/node.properties
@@ -0,0 +1,103 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==================================================
+# * org.onap.dmaap
+# * ===========================================================================
+# * Copyright � 2017 AT&T Intellectual Property. All rights reserved.
+# * ===========================================================================
+# * Licensed under the Apache License, Version 2.0 (the "License");
+# * you may not use this file except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+#  *      http://www.apache.org/licenses/LICENSE-2.0
+# *
+#  * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# * ============LICENSE_END====================================================
+# *
+# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# *
+#-------------------------------------------------------------------------------
+#
+#    Configuration parameters set at startup for the DataRouter node
+#
+#    URL to retrieve dynamic configuration
+ProvisioningURL = https://dmaap-dr-prov:8443/internal/prov
+#
+#    URL to upload PUB/DEL/EXP logs
+LogUploadURL = https://dmaap-dr-prov:8443/internal/logs
+#
+#    The port number for http as seen within the server
+IntHttpPort = 8080
+#
+#    The port number for https as seen within the server
+IntHttpsPort = 8443
+#
+#    The external port number for https taking port mapping into account
+ExtHttpsPort = 443
+#
+#    The minimum interval between fetches of the dynamic configuration from the provisioning server
+MinProvFetchInterval = 10000
+#
+#    The minimum interval between saves of the redirection data file
+MinRedirSaveInterval = 10000
+#
+#    The path to the directory where log files are stored
+LogDir = /opt/app/datartr/logs
+#
+#    The retention interval (in days) for log files
+LogRetention = 30
+#
+#    The path to the directories where data and meta data files are stored
+SpoolDir = /opt/app/datartr/spool
+#
+#    The path to the redirection data file
+RedirectionFile = etc/redirections.dat
+#
+#    The type of keystore for https
+KeyStoreType = jks
+#
+#    The path to the keystore for https
+KeyStoreFile = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks
+#
+#    The password for the https keystore
+KeyStorePassword=]3V)($O&.Mv]W{f8^]6SxGNL
+#
+#    The password for the private key in the https keystore
+KeyPassword=]3V)($O&.Mv]W{f8^]6SxGNL
+#
+#    The type of truststore for https
+TrustStoreType = jks
+#
+#    The path to the truststore for https
+TrustStoreFile = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks
+#
+#    The password for the https truststore
+TrustStorePassword=(Rd,&{]%ePdp}4JZjqoJ2G+g
+#
+#    The path to the file used to trigger an orderly shutdown
+QuiesceFile = etc/SHUTDOWN
+#
+#    The key used to generate passwords for node to node transfers
+NodeAuthKey = Node123!
+#
+#    DR_NODE DEFAULT ENABLED TLS PROTOCOLS
+NodeHttpsProtocols = TLSv1.1|TLSv1.2
+#
+#    AAF type to generate permission string
+AAFType = org.onap.dmaap-dr.feed
+#
+#    AAF default instance to generate permission string - default should be legacy
+AAFInstance = legacy
+#
+#    AAF action to generate permission string - default should be publish
+AAFAction = publish
+#
+#    AAF URL to connect to AAF server
+AafUrl = https://aaf-onap-test.osaaf.org:8095
+#
+#    AAF CADI enabled flag
+CadiEnabled = false
+

diff --git a/plans/dmaap-datarouter/dr-suite/docker-compose/provserver.properties b/plans/dmaap-datarouter/dr-suite/docker-compose/provserver.properties
new file mode 100755 (executable)
index 0000000..e529553
--- /dev/null
+++ b/plans/dmaap-datarouter/dr-suite/docker-compose/provserver.properties
@@ -0,0 +1,69 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==================================================
+# * org.onap.dmaap
+# * ===========================================================================
+# * Copyright � 2017 AT&T Intellectual Property. All rights reserved.
+# * Modifications Copyright (C) 2018 Nokia. All rights reserved.
+# * ===========================================================================
+# * Licensed under the Apache License, Version 2.0 (the "License");
+# * you may not use this file except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+#  *      http://www.apache.org/licenses/LICENSE-2.0
+# *
+#  * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# * ============LICENSE_END====================================================
+# *
+# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# *
+#-------------------------------------------------------------------------------
+
+#Jetty Server properties
+org.onap.dmaap.datarouter.provserver.http.port           = 8080
+org.onap.dmaap.datarouter.provserver.https.port          = 8443
+org.onap.dmaap.datarouter.provserver.https.relaxation    = true
+
+org.onap.dmaap.datarouter.provserver.keystore.type       = jks
+org.onap.dmaap.datarouter.provserver.keymanager.password = AT{];bvaDiytVD&oWhMZj0N5
+org.onap.dmaap.datarouter.provserver.keystore.path       = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks
+org.onap.dmaap.datarouter.provserver.keystore.password   = AT{];bvaDiytVD&oWhMZj0N5
+org.onap.dmaap.datarouter.provserver.truststore.path     = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks
+org.onap.dmaap.datarouter.provserver.truststore.password = ljlS@Y}0]{UO(TnwvEWkgJ%]
+
+org.onap.dmaap.datarouter.provserver.accesslog.dir       = /opt/app/datartr/logs
+org.onap.dmaap.datarouter.provserver.spooldir            = /opt/app/datartr/spool
+org.onap.dmaap.datarouter.provserver.dbscripts           = /opt/app/datartr/etc/misc
+org.onap.dmaap.datarouter.provserver.logretention        = 30
+
+#DMAAP-597 (Tech Dept) REST request source IP auth
+# relaxation to accommodate OOM kubernetes deploy
+org.onap.dmaap.datarouter.provserver.isaddressauthenabled = false
+
+#Localhost address config
+org.onap.dmaap.datarouter.provserver.localhost = 127.0.0.1
+
+# Database access
+org.onap.dmaap.datarouter.db.driver   = org.mariadb.jdbc.Driver
+org.onap.dmaap.datarouter.db.url      = jdbc:mariadb://datarouter-mariadb:3306/datarouter
+org.onap.dmaap.datarouter.db.login    = datarouter
+org.onap.dmaap.datarouter.db.password = datarouter
+
+# PROV - DEFAULT ENABLED TLS PROTOCOLS
+org.onap.dmaap.datarouter.provserver.https.include.protocols = TLSv1.1|TLSv1.2
+
+# AAF config
+org.onap.dmaap.datarouter.provserver.cadi.enabled = false
+
+org.onap.dmaap.datarouter.provserver.passwordencription   = PasswordEncryptionKey#@$%^&1234#
+org.onap.dmaap.datarouter.provserver.aaf.feed.type        = org.onap.dmaap-dr.feed
+org.onap.dmaap.datarouter.provserver.aaf.sub.type         = org.onap.dmaap-dr.sub
+org.onap.dmaap.datarouter.provserver.aaf.instance         = legacy
+org.onap.dmaap.datarouter.provserver.aaf.action.publish   = publish
+org.onap.dmaap.datarouter.provserver.aaf.action.subscribe = subscribe
+
+# AAF URL to connect to AAF server
+org.onap.dmaap.datarouter.provserver.cadi.aaf.url = https://aaf-onap-test.osaaf.org:8095
\ No newline at end of file

diff --git a/plans/dmaap-datarouter/dr-suite/setup.sh b/plans/dmaap-datarouter/dr-suite/setup.sh
index fa0764d..398eb7c 100755 (executable)
--- a/plans/dmaap-datarouter/dr-suite/setup.sh
+++ b/plans/dmaap-datarouter/dr-suite/setup.sh
@@ -11,6 +11,8 @@ cd datarouter
 git pull
 cd $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources
 cp $WORKSPACE/plans/dmaap-datarouter/dr-suite/docker-compose/docker-compose.yml .
+cp $WORKSPACE/plans/dmaap-datarouter/dr-suite/docker-compose/provserver.properties ./prov_data/provserver.properties
+cp $WORKSPACE/plans/dmaap-datarouter/dr-suite/docker-compose/node.properties ./node_data/node.properties
 
 # start DMaaP DR containers with docker compose and configuration from docker-compose.yml
 docker login -u docker -p docker nexus3.onap.org:10001
@@ -47,7 +49,7 @@ for i in {1..10}; do
         then
             echo datarouter-prov container is not in healthy state - the test is not made, teardown...
             cd $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources
-            docker-compose down -v
+            docker-compose rm -sf
             exit 1
         fi
     fi

diff --git a/plans/dmaap-datarouter/dr-suite/teardown.sh b/plans/dmaap-datarouter/dr-suite/teardown.sh
index 8e56869..1b20842 100755 (executable)
--- a/plans/dmaap-datarouter/dr-suite/teardown.sh
+++ b/plans/dmaap-datarouter/dr-suite/teardown.sh
@@ -1,4 +1,4 @@
 #!/bin/bash
 
 cd $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources
-docker-compose down -v
+docker-compose rm -sf