"dmaap_info": {
"client_id": "1475976809466",
"client_role": "org.onap.dcae.pmPublisher",
- "topic_url": "http://dmaap:3904/events/unauthenticated.DCAE_CL_OUTPUT",
+ "topic_url": "http://dmaap-mr:3904/events/unauthenticated.DCAE_CL_OUTPUT",
"location": "san-francisco"
},
"type": "message_router"
"dmaap_info": {
"client_id": "1575976809466",
"client_role": "org.onap.dcae.aaiSub",
- "topic_url": "http://dmaap:3904/events/AAI_EVENT",
+ "topic_url": "http://dmaap-mr:3904/events/AAI_EVENT",
"location": "san-francisco"
}
},
"policy_pm_subscriber": {
"dmaap_info": {
"location": "san-francisco",
- "topic_url": "http://dmaap:3904/events/unauthenticated.PMSH_CL_INPUT",
+ "topic_url": "http://dmaap-mr:3904/events/unauthenticated.PMSH_CL_INPUT",
"client_role": "org.onap.dcae.pmSubscriber",
"client_id": "1575876809456"
},
--- /dev/null
+Client {
+ org.apache.zookeeper.server.auth.DigestLoginModule required
+ username="kafka"
+ password="kafka_secret";
+ };
\ No newline at end of file
--- /dev/null
+# LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+###############################################################################
+###############################################################################
+##
+## Cambria API Server config
+##
+## Default values are shown as commented settings.
+##
+###############################################################################
+##
+## HTTP service
+##
+## 3904 is standard as of 7/29/14.
+#
+## Zookeeper Connection
+##
+## Both Cambria and Kafka make use of Zookeeper.
+##
+config.zk.servers=zookeeper:2181
+
+###############################################################################
+##
+## Kafka Connection
+##
+## Items below are passed through to Kafka's producer and consumer
+## configurations (after removing "kafka.")
+## if you want to change request.required.acks it can take this one value
+#kafka.metadata.broker.list=localhost:9092,localhost:9093
+#kafka.metadata.broker.list={{.Values.kafka.name}}:{{.Values.kafka.port}}
+kafka.metadata.broker.list=kafka:9092
+##kafka.request.required.acks=-1
+#kafka.client.zookeeper=${config.zk.servers}
+consumer.timeout.ms=100
+zookeeper.connection.timeout.ms=6000
+zookeeper.session.timeout.ms=20000
+zookeeper.sync.time.ms=2000
+auto.commit.interval.ms=1000
+fetch.message.max.bytes =1000000
+auto.commit.enable=false
+
+#(backoff*retries > zksessiontimeout)
+kafka.rebalance.backoff.ms=10000
+kafka.rebalance.max.retries=6
+
+
+###############################################################################
+##
+## Secured Config
+##
+## Some data stored in the config system is sensitive -- API keys and secrets,
+## for example. to protect it, we use an encryption layer for this section
+## of the config.
+##
+## The key is a base64 encode AES key. This must be created/configured for
+## each installation.
+#cambria.secureConfig.key=
+##
+## The initialization vector is a 16 byte value specific to the secured store.
+## This must be created/configured for each installation.
+#cambria.secureConfig.iv=
+
+## Southfield Sandbox
+cambria.secureConfig.key=b/7ouTn9FfEw2PQwL0ov/Q==
+cambria.secureConfig.iv=wR9xP5k5vbz/xD0LmtqQLw==
+authentication.adminSecret=fe3cCompound
+
+
+###############################################################################
+##
+## Consumer Caching
+##
+## Kafka expects live connections from the consumer to the broker, which
+## obviously doesn't work over connectionless HTTP requests. The Cambria
+## server proxies HTTP requests into Kafka consumer sessions that are kept
+## around for later re-use. Not doing so is costly for setup per request,
+## which would substantially impact a high volume consumer's performance.
+##
+## This complicates Cambria server failover, because we often need server
+## A to close its connection before server B brings up the replacement.
+##
+
+## The consumer cache is normally enabled.
+#cambria.consumer.cache.enabled=true
+
+## Cached consumers are cleaned up after a period of disuse. The server inspects
+## consumers every sweepFreqSeconds and will clean up any connections that are
+## dormant for touchFreqMs.
+#cambria.consumer.cache.sweepFreqSeconds=15
+cambria.consumer.cache.touchFreqMs=120000
+##stickforallconsumerrequests=false
+## The cache is managed through ZK. The default value for the ZK connection
+## string is the same as config.zk.servers.
+#cambria.consumer.cache.zkConnect=${config.zk.servers}
+
+##
+## Shared cache information is associated with this node's name. The default
+## name is the hostname plus the HTTP service port this host runs on. (The
+## hostname is determined via InetAddress.getLocalHost ().getCanonicalHostName(),
+## which is not always adequate.) You can set this value explicitly here.
+##
+#cambria.api.node.identifier=<use-something-unique-to-this-instance>
+
+#cambria.rateLimit.maxEmptyPollsPerMinute=30
+#cambria.rateLimitActual.delay.ms=10
+
+###############################################################################
+##
+## Metrics Reporting
+##
+## This server can report its metrics periodically on a topic.
+##
+#metrics.send.cambria.enabled=true
+#metrics.send.cambria.topic=cambria.apinode.metrics
+#msgrtr.apinode.metrics.dmaap
+#metrics.send.cambria.sendEverySeconds=60
+
+cambria.consumer.cache.zkBasePath=/fe3c/cambria/consumerCache
+consumer.timeout=17
+default.partitions=3
+default.replicas=3
+##############################################################################
+#100mb
+maxcontentlength=10000
+
+
+##############################################################################
+#AAF Properties
+msgRtr.namespace.aaf=org.onap.dmaap.mr.topic
+msgRtr.topicfactory.aaf=org.onap.dmaap.mr.topicFactory|:org.onap.dmaap.mr.topic:
+enforced.topic.name.AAF=org.onap.dmaap.mr
+forceAAF=false
+transidUEBtopicreqd=false
+defaultNSforUEB=org.onap.dmaap.mr
+##############################################################################
+#Mirror Maker Agent
+
+msgRtr.mirrormakeradmin.aaf=org.onap.dmaap.mr.mirrormaker|*|admin
+msgRtr.mirrormakeruser.aaf=org.onap.dmaap.mr.mirrormaker|*|user
+msgRtr.mirrormakeruser.aaf.create=org.onap.dmaap.mr.topicFactory|:org.onap.dmaap.mr.topic:
+msgRtr.mirrormaker.timeout=15000
+msgRtr.mirrormaker.topic=org.onap.dmaap.mr.mirrormakeragent
+msgRtr.mirrormaker.consumergroup=mmagentserver
+msgRtr.mirrormaker.consumerid=1
+
+kafka.max.poll.interval.ms=300000
+kafka.heartbeat.interval.ms=60000
+kafka.session.timeout.ms=240000
+kafka.max.poll.records=1000
\ No newline at end of file
--- /dev/null
+Server {
+ org.apache.zookeeper.server.auth.DigestLoginModule required
+ user_kafka="kafka_secret";
+};
\ No newline at end of file
version: '3.3'
services:
+ zookeeper:
+ image: nexus3.onap.org:10001/onap/dmaap/zookeeper:6.1.0
+ container_name: dmaap-zookeeper
+ ports:
+ - "2181:2181"
+ environment:
+ ZOOKEEPER_REPLICAS: 1
+ ZOOKEEPER_TICK_TIME: 2000
+ ZOOKEEPER_SYNC_LIMIT: 5
+ ZOOKEEPER_INIT_LIMIT: 10
+ ZOOKEEPER_MAX_CLIENT_CNXNS: 200
+ ZOOKEEPER_AUTOPURGE_SNAP_RETAIN_COUNT: 3
+ ZOOKEEPER_AUTOPURGE_PURGE_INTERVAL: 24
+ ZOOKEEPER_CLIENT_PORT: 2181
+ KAFKA_OPTS: -Djava.security.auth.login.config=/etc/zookeeper/secrets/jaas/zk_server_jaas.conf -Dzookeeper.kerberos.removeHostFromPrincipal=true -Dzookeeper.kerberos.removeRealmFromPrincipal=true -Dzookeeper.authProvider.1=org.apache.zookeeper.server.auth.SASLAuthenticationProvider -Dzookeeper.requireClientAuthScheme=sasl -Dzookeeper.4lw.commands.whitelist=*
+ ZOOKEEPER_SERVER_ID: 1
+ volumes:
+ - ./assets/zk/zk_server_jaas.conf:/etc/zookeeper/secrets/jaas/zk_server_jaas.conf
+ networks:
+ net:
+ aliases:
+ - zookeeper
+
+ kafka:
+ image: nexus3.onap.org:10001/onap/dmaap/kafka111:1.1.0
+ container_name: dmaap-kafka
+ ports:
+ - "9092:9092"
+ environment:
+ enableCadi: 'false'
+ KAFKA_ZOOKEEPER_CONNECT: zookeeper:2181
+ KAFKA_ZOOKEEPER_CONNECTION_TIMEOUT_MS: 40000
+ KAFKA_ZOOKEEPER_SESSION_TIMEOUT_MS: 40000
+ KAFKA_LISTENER_SECURITY_PROTOCOL_MAP: INTERNAL_PLAINTEXT:PLAINTEXT,EXTERNAL_PLAINTEXT:PLAINTEXT
+ KAFKA_ADVERTISED_LISTENERS: INTERNAL_PLAINTEXT://kafka:9092
+ KAFKA_LISTENERS: INTERNAL_PLAINTEXT://0.0.0.0:9092
+ KAFKA_INTER_BROKER_LISTENER_NAME: INTERNAL_PLAINTEXT
+ KAFKA_CONFLUENT_SUPPORT_METRICS_ENABLE: 'false'
+ KAFKA_OPTS: -Djava.security.auth.login.config=/etc/kafka/secrets/jaas/zk_client_jaas.conf
+ KAFKA_ZOOKEEPER_SET_ACL: 'true'
+ KAFKA_OFFSETS_TOPIC_REPLICATION_FACTOR: 1
+ # Reduced the number of partitions only to avoid the timeout error for the first subscribe call in slow environment
+ KAFKA_OFFSETS_TOPIC_NUM_PARTITIONS: 1
+ volumes:
+ - ./assets/kafka/zk_client_jaas.conf:/etc/kafka/secrets/jaas/zk_client_jaas.conf
+ networks:
+ net:
+ aliases:
+ - kafka
+ depends_on:
+ - zookeeper
+
+ dmaap-mr:
+ image: nexus3.onap.org:10001/onap/dmaap/dmaap-mr:1.3.0
+ container_name: dmaap-mr
+ ports:
+ - "3904:3904"
+ - "3905:3905"
+ environment:
+ enableCadi: 'false'
+ volumes:
+ - ./assets/mr/MsgRtrApi.properties:/appl/dmaapMR1/bundleconfig/etc/appprops/MsgRtrApi.properties
+ networks:
+ net:
+ aliases:
+ - dmaap-mr
+ depends_on:
+ - zookeeper
+ - kafka
+
db:
container_name: db
image: postgres
POSTGRES_PASSWORD: $DB_PASSWORD
POSTGRES_USER: $DB_USER
networks:
- dockercompose_net:
+ net:
aliases:
- db
- ./assets/ssl_certs/mock_server_cacert.pem:/var/tmp/mock_server_cacert.pem
- ./assets/ssl_certs/mock_server_key.pem:/var/tmp/mock_server_key.pem
networks:
- dockercompose_net:
+ net:
aliases:
- aai-sim
- ./assets/ssl_certs/mock_server_cacert.pem:/var/tmp/mock_server_cacert.pem
- ./assets/ssl_certs/mock_server_key.pem:/var/tmp/mock_server_key.pem
networks:
- dockercompose_net:
+ net:
aliases:
- cbs-sim
AAI_SERVICE_PORT: 1080
DCAE_CA_CERTPATH: '/opt/app/pmsh/etc/certs/cacert.pem'
networks:
- dockercompose_net:
+ net:
aliases:
- pmsh
networks:
- dockercompose_net:
- external: true
+ net:
+ driver: bridge
#!/bin/bash
-# Place the scripts in run order:
-
-source ${WORKSPACE}/scripts/dmaap-message-router/dmaap-mr-launch.sh
-dmaap_mr_launch
-DMAAP_MR_IP=${IP}
export DB_USER=pmsh
export DB_PASSWORD=pmsh
TEST_PLANS_DIR=$WORKSPACE/plans/dcaegen2-services-pmsh/testsuite
-docker-compose -f ${TEST_PLANS_DIR}/docker-compose.yml up -d db aai cbs-sim
+docker-compose -f ${TEST_PLANS_DIR}/docker-compose.yml up -d zookeeper kafka dmaap-mr db aai cbs-sim
# Slow machine running CSITs can affect db coming up in time for PMSH
echo "Waiting for postgres db to come up..."
done
[[ "$db_response" != "0" ]] && echo "Error: postgres db not accessible" && exit 1
+DMAAP_MR_IP=$(docker inspect -f "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" dmaap-mr)
+
+echo "Waiting for dmaap-message-router to come up ..."
+for i in {1..20}; do
+ dmaap_state=$(curl --write-out '%{http_code}' --silent --output /dev/null $DMAAP_MR_IP:3904/topics)
+ if [[ ${dmaap_state} == "200" ]]
+ then
+ break
+ else
+ sleep 5
+ fi
+done
+[[ "$dmaap_state" != "200" ]] && echo "Error: DMaaP MR container state not healthy" && exit 1
+
docker-compose -f ${TEST_PLANS_DIR}/docker-compose.yml up -d pmsh
PMSH_IP=$(docker inspect -f "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" pmsh)
#!/bin/bash
echo "Starting teardown script"
-source ${WORKSPACE}/scripts/dmaap-message-router/dmaap-mr-teardown.sh
-dmaap_mr_teardown
TEST_PLANS_DIR=$WORKSPACE/plans/dcaegen2-services-pmsh/testsuite
mkdir -p $WORKSPACE/archives
docker exec pmsh /bin/sh -c "cat /var/log/ONAP/dcaegen2/services/pmsh/*"
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# org.onap.dmaap
-# ================================================================================
-# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-#
-source ${SCRIPTS}/common_functions.sh
-
-COMPOSE_PREFIX=${COMPOSE_PROJECT_NAME:-dockercompose}
-export COMPOSE_PROJECT_NAME=$COMPOSE_PREFIX
-echo "COMPOSE_PROJECT_NAME=$COMPOSE_PROJECT_NAME"
-echo "COMPOSE_PREFIX=$COMPOSE_PREFIX"
-
-source ${WORKSPACE}/scripts/dmaap-datarouter/datarouter-launch.sh
-# Launch DR. If true is passed, 2 subscriber containers are also deployed, else false.
-dmaap_dr_launch false
-DRPS_IP=${DR_PROV_IP}
-
-source ${WORKSPACE}/scripts/dmaap-buscontroller/dmaapbc-launch.sh
-dmaapbc_launch ${DRPS_IP}
-DMAAPBC_IP=${DMAAP_BC_IP}
-
-echo "DRPS_IP=$DRPS_IP DMAAPBC_IP=$DMAAPBC_IP"
-
-# Pass any variables required by Robot test suites in ROBOT_VARIABLES
-ROBOT_VARIABLES="-v DRPS_IP:${DRPS_IP} -v DMAAPBC_IP:${DMAAPBC_IP}"
-set -x
-${WORKSPACE}/scripts/dmaap-buscontroller/dmaapbc-init.sh ${DMAAPBC_IP}
-set +x
-
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# org.onap.dmaap
-# ================================================================================
-# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#kill-instance.sh dmaapbc
-cd ${WORKSPACE}/archives/dmaap/dr
-rm -rf last_run_logs/*
-docker cp datarouter-prov:/opt/app/datartr/logs last_run_logs/prov_logs
-docker cp datarouter-node:/opt/app/datartr/logs last_run_logs/node_event_logs
-docker cp datarouter-node:/var/log/onap/datarouter last_run_logs/node_server_logs
-docker cp subscriber-node:/var/log/onap/datarouter last_run_logs/sub1_logs
-docker cp subscriber-node2:/var/log/onap/datarouter last_run_logs/sub2_logs
-docker cp dmaap-bc:/opt/app/dmaapbc/logs/ONAP last_run_logs/bc_logs
-
-sudo sed -i".bak" '/dmaap-dr-prov/d' /etc/hosts
-sudo sed -i".bak" '/dmaap-dr-node/d' /etc/hosts
-docker-compose -f ${WORKSPACE}/scripts/dmaap-datarouter/docker-compose/docker-compose.yml rm -sf
-docker-compose -f ${WORKSPACE}/scripts/dmaap-buscontroller/docker-compose/docker-compose-bc.yml rm -sf
+++ /dev/null
-# Place the suites in run order.
-dmaap-buscontroller/with_dr
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# org.onap.dmaap
-# ================================================================================
-# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-#
-# Place the scripts in run order:
-source ${WORKSPACE}/scripts/dmaap-message-router/dmaap-mr-launch.sh
-dmaap_mr_launch
-MRC_IP=${IP}
-
-mkdir -p ${WORKSPACE}/archives/dmaapmr/last_run_logs
-
-source ${WORKSPACE}/scripts/dmaap-buscontroller/dmaapbc-launch.sh
-dmaapbc_launch $MRC_IP
-DMAAP_BC_IP=${DMAAP_BC_IP}
-
-echo "DMAAP_BC_IP=$DMAAP_BC_IP"
-
-# Pass any variables required by Robot test suites in ROBOT_VARIABLES
-ROBOT_VARIABLES=" -v DMAAP_BC_IP:${DMAAP_BC_IP}"
-set -x
-${WORKSPACE}/scripts/dmaap-buscontroller/dmaapbc-init.sh ${DMAAP_BC_IP}
-set +x
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# org.onap.dmaap
-# ================================================================================
-# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-#
-cd ${WORKSPACE}/archives/dmaapmr
-source ${WORKSPACE}/scripts/dmaap-message-router/dmaap-mr-teardown.sh
-dmaap_mr_teardown
-rm -rf last_run_logs/*
-docker cp dmaap-bc:/opt/app/dmaapbc/logs/ONAP last_run_logs/bc_logs
-docker-compose -f ${WORKSPACE}/scripts/dmaap-buscontroller/docker-compose/docker-compose-bc.yml rm -sf
-
-
-
+++ /dev/null
-# Test suites are relative paths under [integration/csit.git]/tests/.
-# Place the suites in run order.
-dmaap-buscontroller/with_mr
+++ /dev/null
-#!/bin/bash
-# ============LICENSE_START===================================================
-# Copyright (C) 2019-2021 Nordix Foundation.
-# ============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=====================================================
-
-source ${WORKSPACE}/scripts/dmaap-datarouter/datarouter-launch.sh
-# Launch DR. If true is passed, 2 subscriber containers are also deployed, else false.
-dmaap_dr_launch true
-cd ${WORKSPACE}/scripts/dmaap-datarouter/robot_ssl
-# Add the root CA to robot framework. This is then removed on teardown.
-python -c 'import update_ca; update_ca.add_onap_ca_cert()'
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-# ============LICENSE_START===================================================
-# Copyright (C) 2019-2021 Nordix Foundation.
-# ============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=====================================================
-
-source ${WORKSPACE}/scripts/dmaap-datarouter/datarouter-teardown.sh
-teardown_dmaap_dr
\ No newline at end of file
+++ /dev/null
-# Place the suites in run order.
-dmaap-datarouter/ssl-dr-suite
+++ /dev/null
-#!/bin/bash
-
-# $1 is the IP address of the buscontroller
-
-# INITIALIZE: dmaap object
-JSON=/tmp/$$.dmaap
-cat << EOF > $JSON
-{
- "version": "1",
- "topicNsRoot": "org.onap.dmaap",
- "drProvUrl": "https://dmaap-dr-prov:8443",
- "dmaapName": "onapCSIT",
- "bridgeAdminTopic": "MM_AGENT_PROV"
-
-}
-EOF
-
-echo "Initializing /dmaap endpoint"
-curl -v -k -X POST -d @${JSON} -H "Content-Type: application/json" https://$1:8443/webapi/dmaap
-
-
-# INITIALIZE: dcaeLocation object
-JSON=/tmp/$$.loc
-cat << EOF > $JSON
-{
- "dcaeLocationName": "csit-sanfrancisco",
- "dcaeLayer": "central-cloud",
- "clli": "CSIT12345",
- "zone": "zoneA"
-
-}
-EOF
-
-echo "Initializing /dcaeLocations endpoint"
-curl -v -k -X POST -d @${JSON} -H "Content-Type: application/json" https://$1:8443/webapi/dcaeLocations
-
-
-# INITIALIZE: MR object in 1 site
-# since MR is currently deployed via docker-compose, its IP doesn't seem
-# to be routable from DBCL. Fortunately, the MR port is mapped from the docker bridge IP address.
-# Found this article for how to deterine the docker bridge IP so using it as a workaround.
-# https://stackoverflow.com/questions/22944631/how-to-get-the-ip-address-of-the-docker-host-from-inside-a-docker-container
-# Used the following snippet found buried in a comment to an answer and then modified for only 1 value.
-DOCKER_HOST=$(ip -4 addr show docker0 | grep -Po 'inet \K[\d.]+' | head -1 )
-# Perhaps there is a better way...
-JSON=/tmp/$$.mrc
-cat << EOF > $JSON
-{
- "dcaeLocationName": "csit-sanfrancisco",
- "fqdn": "message-router",
- "topicProtocol" : "http",
- "topicPort": "3904"
-
-}
-EOF
-
-echo "Initializing /mr_clusters endpoint"
-curl -v -k -X POST -d @${JSON} -H "Content-Type: application/json" https://$1:8443/webapi/mr_clusters
+++ /dev/null
-#!/bin/bash
-
-# script to launch DMaaP buscontroller docker container
-# sets global var IP with assigned IP address
-
-function dmaapbc_launch() {
- export dmaap_prov_ip=$1
- export dmaap_mr_ip=$1
- cd ${WORKSPACE}/scripts/dmaap-buscontroller/docker-compose
- docker-compose -f docker-compose-bc.yml up -d
-
- sleep 10
-
- DMAAP_BC_IP=`get-instance-ip.sh dmaap-bc`
-
- source ${SCRIPTS}/common_functions.sh
- bypass_ip_adress ${DMAAP_BC_IP}
-
- # Wait for initialization
- for i in 1 2 3 4 5 6 7 8 9 10; do
- curl -sS ${DMAAP_BC_IP}:8080 && break
- echo sleep ${i}
- sleep ${i}
- done
-
-}
+++ /dev/null
-DMAAPBC_WAIT_TO_EXIT=Y
-DMAAPBC_PG_ENABLED=false
-DMAAPBC_CSIT=Yes
-DMAAPBC_KSTOREFILE=/opt/app/osaaf/local/org.onap.dmaap-bc.jks
\ No newline at end of file
+++ /dev/null
-############################################################
-# Properties Generated by AT&T Certificate Manager
-# by root
-# on 2021-03-12T11:38:49.244+0000
-# @copyright 2019, AT&T
-############################################################
-Challenge=secret
-cadi_alias=dmaap-bc@dmaap-bc.onap.org
-cadi_key_password=secret
-#cadi_keyfile=/opt/app/osaaf/local/org.onap.dmaap-dr.keyfile
-cadi_keystore=/opt/app/osaaf/local/org.onap.dmaap-bc.jks
-cadi_keystore_password=secret
-cadi_keystore_password_jks=secret
-cadi_keystore_password_p12=secret
-cadi_truststore=/opt/app/osaaf/local/truststore.jks
-cadi_truststore_password=secret
-cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
+++ /dev/null
-############################################################
-# Properties Generated by AT&T Certificate Manager
-# by root
-# on 2021-03-12T11:25:54.608+0000
-# @copyright 2019, AT&T
-############################################################
-cadi_latitude=38.0
-cadi_longitude=-72.0
+++ /dev/null
-############################################################
-# Properties Generated by AT&T Certificate Manager
-# by root
-# on 2021-03-12T11:25:54.617+0000
-# @copyright 2019, AT&T
-############################################################
-aaf_env=DEV
-aaf_id=dmaap-bc@dmaap-bc.onap.org
-aaf_locate_url=https://aaf-locate.onap:8095
-aaf_locator_app_ns=org.osaaf.aaf
-aaf_locator_container=oom
-aaf_locator_container_ns=onap
-aaf_locator_fqdn=dmaap-bc
-aaf_locator_public_fqdn=aaf.osaaf.org
-aaf_oauth2_introspect_url=https://AAF_LOCATE_URL/%CNS.%AAF_NS.introspect:2.1/introspect
-aaf_oauth2_token_url=https://AAF_LOCATE_URL/%CNS.%AAF_NS.token:2.1/token
-aaf_url=https://AAF_LOCATE_URL/%CNS.%AAF_NS.service:2.1
-aaf_url_cm=https://AAF_LOCATE_URL/%CNS.%AAF_NS.cm:2.1
-aaf_url_fs=https://AAF_LOCATE_URL/%CNS.%AAF_NS.fs:2.1
-aaf_url_gui=https://AAF_LOCATE_URL/%CNS.%AAF_NS.gui:2.1
-aaf_url_hello=https://aaf-locate.onap:8095/locate/onap.org.osaaf.aaf.hello:2.1
-aaf_url_oauth=https://AAF_LOCATE_URL/%CNS.%AAF_NS.oauth:2.1
-cadi_prop_files=/opt/app/osaaf/local/org.onap.dmaap-bc.location.props:/opt/app/osaaf/local/org.onap.dmaap-bc.cred.props
-cadi_protocols=TLSv1.1,TLSv1.2
+++ /dev/null
-
-#####################################################
-#
-# Hooks for specific environment configurations
-#
-#####################################################
-# Indicator for whether to use AAF for authentication
-UseAAF: false
-
-# Stub out southbound calls for Unit Test cases to run. e.g. not timeout
-# Comment out in other environments to get default (No)
-#UnitTest: Yes
-
-
-#####################################################
-#
-# Settings for Southbound API: Datarouter
-#
-#####################################################
-
-# URI to retrieve dynamic DR configuration
-ProvisioningURI: /internal/prov
-
-# indicator for handling feed delete:
-# DeleteOnDR - means use the DR API to DELETE a feed. (default for backwards compatibility)
-# SimulateDelete - means preserve the feed on DR (after cleaning it up), and mark as DELETED in DBCL. Better for cloudify environments.
-Feed.deleteHandling: SimulateDelete
-
-###########################################################
-# The following properties default to match ONAP DR instance.
-# However, there are some non-ONAP DR instances that require other values.
-# Sets the X-DR-ON-BEHALF-OF HTTP Header value
-#DR.onBehalfHeader:
-# Value for the Content-Type Header in DR Feed API
-#DR.feedContentType:
-# Value for the Content-Type Header in DR Subscription API
-#DR.subContentType:
-#
-# END OF properties helpful for non-ONAP DR instance.
-############################################################
-
-#####################################################
-#
-# Settings for Soutbound API: Postgresql
-#
-#####################################################
-# flag indicates if we are using postgresql
-UsePGSQL: false
-
-
-#####################################################
-#
-# Settings for Soutbound API: Message Router
-#
-#####################################################
-# indicator for multi-site (locations) deployment. Give clue to buscontroller whether
-# there is a need for message replication between edge and central.
-# ONAP Casablanca is a single site deployment
-MR.multisite: false
-
-# FQDN of primary message router.
-# In ONAP Casablanca, there is only 1 message router service, so use that.
-# In a multi-site, MR cluster deployment, use the CNAME DNS entry which resolves to the primary central MR
-MR.CentralCname: message-router
-
-# Indicator for whether we want hostname verification on SSL connection to MR
-MR.hostnameVerify: false
-
-
-# MR Client Delete Level thoroughness:
-# 0 = don't delete
-# 1 = delete from persistent store
-# 2 = delete from persistent store (DB) and authorization store (AAF)
-MR.ClientDeleteLevel: 1
-
-# namespace of MR Topic Factory
-MR.TopicFactoryNS: org.onap.dmaap.mr.topicFactory
-
-# AAF Role assigned to Topic Manager Identity
-MR.TopicMgrRole: org.onap.dmaap-bc-topic-mgr.client
-
-# MR topic ProjectID (used in certain topic name generation formats)
-MR.projectID: mr
-
-# Use Basic Authentication when provisioning topics
-MR.authentication: basicAuth
-
-# MR topic name style (default is FQTN_LEGACY_FORMAT)
-#MR.topicStyle: FQTN_LEGACY_FORMAT
-#
-# end of MR Related Properties
-################################################################################
-
-
-#####################################################
-#
-# Settings for Southbound API: AAF proxy
-#
-#####################################################
-# URL of the AAF server
-aaf.URL: {{ .Values.aafURL }}
-
-# TopicMgr Identity
-aaf.TopicMgrUser: {{ .Values.topicMgrUser }}
-
-# Password for TopicMgr identity
-aaf.TopicMgrPassword: {{ .Values.topicMgrPwd }}
-
-# Buscontroller Admin Identity
-aaf.AdminUser: {{ .Values.adminUser }}
-
-# Admin Password
-aaf.AdminPassword: {{ .Values.adminPwd }}
-
-# Identity that is owner of any created namespaces for topics
-aaf.NsOwnerIdentity: {{ .Values.adminUser }}
-
-
-#
-# endof AAF Properties
-####################################################
-
-
-#####################################################
-#
-# Settings for authorization of DBCAPI
-#
-#####################################################
-# Namespace for URI values for the API used to create AAF permissions
-# e.g. if ApiNamespace is X.Y.dmaapbc.api then for URI /mr_clients we create AAF perm X.Y.dmaapbc.api.mr_clients
-ApiNamespace: org.onap.dmaap-bc.api
-
-# If API authorization is required, then implement a class to enforce it.
-# This overrides the Class used for API permission check.
-ApiPermission.Class: org.onap.dmaap.dbcapi.authentication.AllowAll
-
-
-#####################################################
-#
-# Certificate Management
-#
-#####################################################
-
-# Indicates how we are expecting certificates to be provided:
-# cadi - a set of artifacts will be downloaded from AAF at deployment time, and details will be in a cadi properties file
-# legacy (default) - artifacts will be installed manually or some other way and details will be in this file
-CertificateManagement: cadi
-
-# When CertificateManagement is cadi, then this is where all the cadi properties will be.
-# Note that the cadi properties include where the cert is, and the encrypted passwords to read.
-cadi.properties: /opt/app/osaaf/local/org.onap.dmaap-bc.props
-
-
-#####################################################
-#
-# HTTP Server Configuration
-#
-#####################################################
-
-# Allow http access to dbcapi
-HttpAllowed: true
-
-# listen to http port within this container (server)
-IntHttpPort: 8080
-
-# listen to https port within this container (server)
-# set to 0 if no certificates are available.
-IntHttpsPort: 8443
+++ /dev/null
-version: '2.1'
-services:
- dmaap-bc:
- container_name: dmaap-bc
- hostname: dmaap-bc
- image: nexus3.onap.org:10001/onap/dmaap/dmaap-bc
- ports:
- - "30241:8080"
- - "30242:8443"
- volumes:
- - ./buscontroller.env:/opt/app/config/conf/buscontroller.env
- - ./dmaapbc.properties:/opt/app/config/conf/dmaapbc.properties
- - ./cadi_aaf:/opt/app/osaaf/local
- - ./logback.xml:/opt/app/dmaapbc/etc/logback.xml
- networks:
- dockercompose_net:
- aliases:
- - dmaap-bc
- extra_hosts:
- - dmaap-dr-prov:$dmaap_prov_ip
- - message-router:$dmaap_prov_ip
-
-networks:
- dockercompose_net:
- external: true
+++ /dev/null
-<!--
- ============LICENSE_START==========================================
- org.onap.dmaap
- ===================================================================
- Copyright © 2018 AT&T Intellectual Property. All rights reserved.
- ===================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ============LICENSE_END============================================
- ECOMP is a trademark and service mark of AT&T Intellectual Property.
--->
-
-
-<configuration scan="true" scanPeriod="3 seconds">
- <!--<jmxConfigurator /> -->
- <!-- directory path for all other type logs -->
- <property name="logDir" value="logs" />
-
- <!-- directory path for debugging type logs -->
- <property name="debugDir" value="logs" />
-
- <!-- specify the component name
- <ECOMP-component-name>::= "MSO" | "DCAE" | "ASDC " | "AAI" |"Policy" | "SDNC" | "AC" -->
- <property name="componentName" value="ONAP"></property>
-
- <!-- log file names -->
- <property name="generalLogName" value="application" />
- <property name="securityLogName" value="security" />
- <property name="performanceLogName" value="performance" />
- <property name="serverLogName" value="server" />
- <property name="policyLogName" value="policy" />
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
-
- <property name="defaultPattern" value="%date{ISO8601,UTC}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}|%msg%n" />
-
- <property name="auditLoggerPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" />
- <property name="metricsLoggerPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" />
- <property name="errorLoggerPattern" value="%date{ISO8601,UTC}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDescription}|%msg%n" />
- <property name="debugLoggerPattern" value="%date{ISO8601,UTC}|%X{RequestId}|%thread|%msg%n" />
-
- <property name="logDirectory" value="${logDir}/${componentName}" />
- <property name="debugLogDirectory" value="${debugDir}/${componentName}" />
-
-
- <!-- Example evaluator filter applied against console appender -->
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
-
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
-
- <!-- The EELFAppender is used to record events to the general application
- log -->
-
-
- <appender name="EELF"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${generalLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${generalLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELF" />
- </appender>
-
- <!-- EELF Security Appender. This appender is used to record security events
- to the security log file. Security events are separate from other loggers
- in EELF so that security log records can be captured and managed in a secure
- way separate from the other logs. This appender is set to never discard any
- events. -->
- <appender name="EELFSecurity"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${securityLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <discardingThreshold>0</discardingThreshold>
- <appender-ref ref="EELFSecurity" />
- </appender>
-
- <!-- EELF Performance Appender. This appender is used to record performance
- records. -->
- <appender name="EELFPerformance"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${performanceLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFPerformance" />
- </appender>
-
- <!-- EELF Server Appender. This appender is used to record Server related
- logging events. The Server logger and appender are specializations of the
- EELF application root logger and appender. This can be used to segregate Server
- events from other components, or it can be eliminated to record these events
- as part of the application root log. -->
- <appender name="EELFServer"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${serverLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFServer" />
- </appender>
-
-
- <!-- EELF Policy Appender. This appender is used to record Policy engine
- related logging events. The Policy logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <appender name="EELFPolicy"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${policyLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFPolicy" />
- </appender>
-
-
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
-
- <appender name="EELFAudit"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${auditLoggerPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
-
-<appender name="EELFMetrics"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${metricsLoggerPattern}</pattern>
- </encoder>
- </appender>
-
-
- <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFMetrics"/>
- </appender>
-
- <appender name="EELFError"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${errorLoggerPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFError"/>
- </appender>
-
- <appender name="EELFDebug"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${debugLogDirectory}/${debugLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${debugLogDirectory}/${debugLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${debugLoggerPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
-
-
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger name="com.att.eelf" level="info" additivity="false">
- <appender-ref ref="asyncEELF" />
- </logger>
- <logger name="com.att.eelf.security" level="info" additivity="false">
- <appender-ref ref="asyncEELFSecurity" />
- </logger>
- <logger name="com.att.eelf.perf" level="info" additivity="false">
- <appender-ref ref="asyncEELFPerformance" />
- </logger>
- <logger name="com.att.eelf.server" level="info" additivity="false">
- <appender-ref ref="asyncEELFServer" />
- </logger>
- <logger name="com.att.eelf.policy" level="info" additivity="false">
- <appender-ref ref="asyncEELFPolicy" />
- </logger>
-
- <logger name="com.att.eelf.audit" level="info" additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
-
- <logger name="com.att.eelf.metrics" level="info" additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
-
-
- <logger name="com.att.eelf.error" level="error" additivity="false">
- <appender-ref ref="asyncEELFError" />
- </logger>
-
- <logger name="com.att.eelf.debug" level="debug" additivity="false">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
-
-
-
-
- <root level="TRACE">
- <appender-ref ref="asyncEELF" />
- </root>
-
-</configuration>
+++ /dev/null
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# Copyright (C) 2021 Nordix Foundation.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=========================================================
-#
-
-function dmaap_dr_launch() {
-
- subscribers_required=$1
- mkdir -p ${WORKSPACE}/archives/dmaap/dr/last_run_logs
-
- # start DMaaP DR containers with docker compose and configuration from docker-compose.yml
- docker login -u docker -p docker nexus3.onap.org:10001
- if [[ ${subscribers_required} == true ]]; then
- docker-compose -f ${WORKSPACE}/scripts/dmaap-datarouter/docker-compose/docker-compose.yml up -d
- else
- docker-compose -f ${WORKSPACE}/scripts/dmaap-datarouter/docker-compose/docker-compose.yml up -d datarouter-prov datarouter-node mariadb
- fi
-
- # Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb
- for i in 1 2 3 4 5 6 7 8 9 10; do
- if [[ $(docker inspect --format '{{ .State.Running }}' datarouter-node) ]] && \
- [[ $(docker inspect --format '{{ .State.Running }}' datarouter-prov) ]] && \
- [[ $(docker inspect --format '{{ .State.Running }}' mariadb) ]]
- then
- echo "DR Service Running"
- break
- else
- echo sleep ${i}
- sleep ${i}
- fi
- done
-
- # Wait for healthy container datarouter-prov
- for i in 1 2 3 4 5 6 7 8 9 10; do
- if [[ "$(docker inspect --format '{{ .State.Health.Status }}' datarouter-prov)" = 'healthy' ]]
- then
- echo datarouter-prov.State.Health.Status is $(docker inspect --format '{{ .State.Health.Status }}' datarouter-prov)
- echo "DR Service Running, datarouter-prov container is healthy"
- break
- else
- echo datarouter-prov.State.Health.Status is $(docker inspect --format '{{ .State.Health.Status }}' datarouter-prov)
- echo sleep ${i}
- sleep ${i}
- if [[ ${i} = 10 ]]
- then
- echo datarouter-prov container is not in healthy state - the test is not made, teardown...
- docker-compose rm -sf
- exit 1
- fi
- fi
- done
-
- DR_PROV_IP=`get-instance-ip.sh datarouter-prov`
- DR_NODE_IP=`get-instance-ip.sh datarouter-node`
- DR_GATEWAY_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}' datarouter-prov)
- echo DR_PROV_IP=${DR_PROV_IP}
- echo DR_NODE_IP=${DR_NODE_IP}
- echo DR_GATEWAY_IP=${DR_GATEWAY_IP}
- if [[ ${subscribers_required} == true ]]
- then
- DR_SUB_IP=`get-instance-ip.sh subscriber-node`
- DR_SUB2_IP=`get-instance-ip.sh subscriber-node2`
- echo DR_SUB_IP=${DR_SUB_IP}
- echo DR_SUB2_IP=${DR_SUB2_IP}
- fi
-
-
- sudo sed -i "$ a $DR_PROV_IP dmaap-dr-prov" /etc/hosts
- sudo sed -i "$ a $DR_NODE_IP dmaap-dr-node" /etc/hosts
-
- docker exec -i datarouter-prov sh -c "curl -k -X PUT https://$DR_PROV_IP:8443/internal/api/NODES?val=dmaap-dr-node\|$DR_GATEWAY_IP"
- docker exec -i datarouter-prov sh -c "curl -k -X PUT https://$DR_PROV_IP:8443/internal/api/PROV_AUTH_ADDRESSES?val=dmaap-dr-prov\|$DR_GATEWAY_IP"
-
- #Pass any variables required by Robot test suites in ROBOT_VARIABLES
- ROBOT_VARIABLES="-v DR_PROV_IP:${DR_PROV_IP} -v DR_NODE_IP:${DR_NODE_IP} -v DR_SUB_IP:${DR_SUB_IP} -v DR_SUB2_IP:${DR_SUB2_IP}"
-}
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-# ============LICENSE_START===================================================
-# Copyright (C) 2019-2021 Nordix Foundation.
-# ============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=====================================================
-
-function teardown_dmaap_dr (){
- cd ${WORKSPACE}/archives/dmaap/dr
- rm -rf last_run_logs/*
- docker cp datarouter-prov:/opt/app/datartr/logs last_run_logs/prov_logs
- docker cp datarouter-node:/opt/app/datartr/logs last_run_logs/node_event_logs
- docker cp datarouter-node:/var/log/onap/datarouter last_run_logs/node_server_logs
- docker cp subscriber-node:/var/log/onap/datarouter last_run_logs/sub1_logs
- docker cp subscriber-node2:/var/log/onap/datarouter last_run_logs/sub2_logs
- sudo sed -i".bak" '/dmaap-dr-prov/d' /etc/hosts
- sudo sed -i".bak" '/dmaap-dr-node/d' /etc/hosts
- docker-compose -f ${WORKSPACE}/scripts/dmaap-datarouter/docker-compose/docker-compose.yml rm -sf
- cd ${WORKSPACE}/scripts/dmaap-datarouter/robot_ssl
- python -c 'import update_ca; update_ca.remove_onap_ca_cert()'
-}
\ No newline at end of file
+++ /dev/null
-#
-# ============LICENSE_START=======================================================
-# Copyright (C) 2019-21 Nordix Foundation.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=========================================================
-#
-#
-version: '2.1'
-services:
- datarouter-prov:
- image: nexus3.onap.org:10001/onap/dmaap/datarouter-prov
- container_name: datarouter-prov
- hostname: dmaap-dr-prov
- ports:
- - "443:8443"
- - "8443:8443"
- - "8080:8080"
- volumes:
- - ./provserver.properties:/opt/app/datartr/etc/provserver.properties
- - ../dr_certs/dr_prov/truststore.jks:/opt/app/osaaf/local/truststore.jks
- - ../dr_certs/dr_prov/org.onap.dmaap-dr-prov.p12:/opt/app/osaaf/local/org.onap.dmaap-dr-prov.p12
- - ../dr_certs/dr_prov/org.onap.dmaap-dr.cred.props:/opt/app/osaaf/local/org.onap.dmaap-dr.cred.props
- depends_on:
- mariadb:
- condition: service_healthy
- healthcheck:
- test: ["CMD", "curl", "-f", "http://dmaap-dr-prov:8080/internal/prov"]
- interval: 10s
- timeout: 30s
- retries: 5
- networks:
- net:
- aliases:
- - dmaap-dr-prov
-
- datarouter-node:
- image: nexus3.onap.org:10001/onap/dmaap/datarouter-node
- container_name: datarouter-node
- hostname: dmaap-dr-node
- ports:
- - "9443:8443"
- - "9090:8080"
- volumes:
- - ./node.properties:/opt/app/datartr/etc/node.properties
- - ../dr_certs/dr_node/truststore.jks:/opt/app/osaaf/local/truststore.jks
- - ../dr_certs/dr_node/org.onap.dmaap-dr-node.p12:/opt/app/osaaf/local/org.onap.dmaap-dr-node.p12
- - ../dr_certs/dr_node/org.onap.dmaap-dr.cred.props:/opt/app/osaaf/local/org.onap.dmaap-dr.cred.props
- depends_on:
- datarouter-prov:
- condition: service_healthy
- networks:
- net:
- aliases:
- - dmaap-dr-node
-
- datarouter-subscriber:
- image: nexus3.onap.org:10001/onap/dmaap/datarouter-subscriber
- container_name: subscriber-node
- hostname: subscriber.com
- ports:
- - "7070:7070"
- volumes:
- - ./subscriber.properties:/opt/app/subscriber/etc/subscriber.properties
- networks:
- net:
- aliases:
- - subscriber.com
-
- datarouter-subscriber2:
- image: nexus3.onap.org:10001/onap/dmaap/datarouter-subscriber
- container_name: subscriber-node2
- hostname: subscriber2.com
- ports:
- - "7071:7070"
- volumes:
- - ./subscriber.properties:/opt/app/subscriber/etc/subscriber.properties
- networks:
- net:
- aliases:
- - subscriber2.com
-
- mariadb:
- image: mariadb:10.2.14
- container_name: mariadb
- hostname: datarouter-mariadb
- ports:
- - "3306:3306"
- environment:
- MYSQL_ROOT_PASSWORD: datarouter
- MYSQL_DATABASE: datarouter
- MYSQL_USER: datarouter
- MYSQL_PASSWORD: datarouter
- healthcheck:
- test: ["CMD", "mysqladmin" ,"ping", "-h", "localhost", "-u", "datarouter", "-pdatarouter", "--silent"]
- interval: 10s
- timeout: 30s
- retries: 5
- networks:
- net:
- aliases:
- - datarouter-mariadb
-
-networks:
- net:
- driver: bridge
+++ /dev/null
-# ============LICENSE_START===================================================
-# Copyright (C) 2019-2021 Nordix Foundation.
-# ============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=====================================================
-#
-# Configuration parameters set at startup for the DataRouter node
-#
-# URL to retrieve dynamic configuration
-ProvisioningURL = https://dmaap-dr-prov:8443/internal/prov
-#
-# URL to upload PUB/DEL/EXP logs
-LogUploadURL = https://dmaap-dr-prov:8443/internal/logs
-#
-# The port number for http as seen within the server
-IntHttpPort = 8080
-#
-# The port number for https as seen within the server
-IntHttpsPort = 8443
-#
-# The external port number for https taking port mapping into account
-ExtHttpsPort = 443
-#
-# The minimum interval between fetches of the dynamic configuration from the provisioning server
-MinProvFetchInterval = 10000
-#
-# The minimum interval between saves of the redirection data file
-MinRedirSaveInterval = 10000
-#
-# The path to the directory where log files are stored
-LogDir = /opt/app/datartr/logs
-#
-# The retention interval (in days) for log files
-LogRetention = 30
-#
-# The path to the directories where data and meta data files are stored
-SpoolDir = /opt/app/datartr/spool
-#
-# The path to the redirection data file
-RedirectionFile = etc/redirections.dat
-#
-# The type of keystore for https
-KeyStoreType = PKCS12
-#
-# The type of truststore for https
-TrustStoreType = jks
-#
-# The path to the file used to trigger an orderly shutdown
-QuiesceFile = etc/SHUTDOWN
-#
-# The key used to generate passwords for node to node transfers
-NodeAuthKey = Node123!
-#
-# DR_NODE DEFAULT ENABLED TLS PROTOCOLS
-NodeHttpsProtocols = TLSv1.1|TLSv1.2
-#
-# AAF type to generate permission string
-AAFType = org.onap.dmaap-dr.feed
-#
-# AAF default instance to generate permission string - default should be legacy
-AAFInstance = legacy
-#
-# AAF action to generate permission string - default should be publish
-AAFAction = publish
-#
-# AAF CADI enabled flag
-CadiEnabled = false
-#
-# AAF Props file path
-AAFPropsFilePath = /opt/app/osaaf/local/org.onap.dmaap-dr.props
+++ /dev/null
-# ============LICENSE_START===================================================
-# Copyright (C) 2019-2021 Nordix Foundation.
-# ============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=====================================================
-
-#Jetty Server properties
-org.onap.dmaap.datarouter.provserver.http.port = 8080
-org.onap.dmaap.datarouter.provserver.https.port = 8443
-org.onap.dmaap.datarouter.provserver.https.relaxation = true
-
-org.onap.dmaap.datarouter.provserver.aafprops.path = /opt/app/osaaf/local/org.onap.dmaap-dr.props
-
-org.onap.dmaap.datarouter.provserver.accesslog.dir = /opt/app/datartr/logs
-org.onap.dmaap.datarouter.provserver.spooldir = /opt/app/datartr/spool
-org.onap.dmaap.datarouter.provserver.dbscripts = /opt/app/datartr/etc/misc
-org.onap.dmaap.datarouter.provserver.logretention = 30
-
-#DMAAP-597 (Tech Dept) REST request source IP auth
-# relaxation to accommodate OOM kubernetes deploy
-org.onap.dmaap.datarouter.provserver.isaddressauthenabled = false
-
-#Localhost address config
-org.onap.dmaap.datarouter.provserver.localhost = 127.0.0.1
-
-# Database access
-org.onap.dmaap.datarouter.db.driver = org.mariadb.jdbc.Driver
-org.onap.dmaap.datarouter.db.url = jdbc:mariadb://datarouter-mariadb:3306/datarouter
-org.onap.dmaap.datarouter.db.login = datarouter
-org.onap.dmaap.datarouter.db.password = datarouter
-
-# PROV - DEFAULT ENABLED TLS PROTOCOLS
-org.onap.dmaap.datarouter.provserver.https.include.protocols = TLSv1.1|TLSv1.2
-
-# AAF config
-org.onap.dmaap.datarouter.provserver.cadi.enabled = false
-
-org.onap.dmaap.datarouter.provserver.passwordencryption = PasswordEncryptionKey#@$%^&1234#
-org.onap.dmaap.datarouter.provserver.aaf.feed.type = org.onap.dmaap-dr.feed
-org.onap.dmaap.datarouter.provserver.aaf.sub.type = org.onap.dmaap-dr.sub
-org.onap.dmaap.datarouter.provserver.aaf.instance = legacy
-org.onap.dmaap.datarouter.provserver.aaf.action.publish = publish
-org.onap.dmaap.datarouter.provserver.aaf.action.subscribe = subscribe
\ No newline at end of file
+++ /dev/null
-# ============LICENSE_START===================================================
-# Copyright (C) 2019-2021 Nordix Foundation.
-# ============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=====================================================
-
-#Subscriber properties
-org.onap.dmaap.datarouter.subscriber.http.port = 7070
-org.onap.dmaap.datarouter.subscriber.https.port = 7443
-org.onap.dmaap.datarouter.subscriber.auth.user = LOGIN
-org.onap.dmaap.datarouter.subscriber.auth.password = PASSWORD
-org.onap.dmaap.datarouter.subscriber.delivery.dir = /opt/app/subscriber/delivery
-
-org.onap.dmaap.datarouter.subscriber.https.relaxation = true
-org.onap.dmaap.datarouter.subscriber.keystore.type = jks
-org.onap.dmaap.datarouter.subscriber.keymanager.password = changeit
-org.onap.dmaap.datarouter.subscriber.keystore.path = /opt/app/datartr/self_signed/keystore.jks
-org.onap.dmaap.datarouter.subscriber.keystore.password = changeit
-org.onap.dmaap.datarouter.subscriber.truststore.path = /opt/app/datartr/self_signed/cacerts.jks
-org.onap.dmaap.datarouter.subscriber.truststore.password = changeit
-
-
-
+++ /dev/null
-############################################################
-# Properties Generated by AT&T Certificate Manager
-# by root
-# on 2021-03-12T11:38:49.244+0000
-# @copyright 2019, AT&T
-############################################################
-Challenge=secret
-cadi_alias=dmaap-dr-node@dmaap-dr.onap.org
-cadi_key_password=secret
-#cadi_keyfile=/opt/app/osaaf/local/org.onap.dmaap-dr.keyfile
-cadi_keystore=/opt/app/osaaf/local/org.onap.dmaap-dr-node.p12
-cadi_keystore_password=secret
-cadi_keystore_password_jks=secret
-cadi_keystore_password_p12=secret
-cadi_truststore=/opt/app/osaaf/local/truststore.jks
-cadi_truststore_password=secret
-cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
+++ /dev/null
-############################################################
-# Properties Generated by AT&T Certificate Manager
-# by root
-# on 2021-03-12T11:29:50.699+0000
-# @copyright 2019, AT&T
-############################################################
-Challenge=secret
-cadi_alias=dmaap-dr-prov@dmaap-dr.onap.org
-cadi_key_password=secret
-#cadi_keyfile=/opt/app/osaaf/local/org.onap.dmaap-dr.keyfile
-cadi_keystore=/opt/app/osaaf/local/org.onap.dmaap-dr-prov.p12
-cadi_keystore_password=secret
-cadi_keystore_password_jks=secret
-cadi_keystore_password_p12=secret
-cadi_truststore=/opt/app/osaaf/local/truststore.jks
-cadi_truststore_password=secret
-cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
+++ /dev/null
-
-# Issuer: C=US,O=ONAP,OU=OSAAF
-# Subject: C=US,O=ONAP,OU=OSAAF
-# Label: ""
-# Serial: 0x9EAEEDC0A7CEB59D
-# MD5 Fingerprint: 77:EB:5E:94:2E:B7:A3:45:97:6C:87:FE:A7:F7:64:0F
-# SHA1 Fingerprint: 90:25:D1:D3:8B:3C:BE:2C:73:E9:6C:1A:48:5B:06:A8:39:0D:54:3B
-# SHA256 Fingerprint: 1F:C2:BB:F6:7E:11:6F:F0:4C:C3:D9:6C:73:E5:99:B7:CA:7D:4D:EF:AA:6C:69:46:0D:2C:7B:A9:E4:23:5F:EA
------BEGIN CERTIFICATE-----
-MIIFczCCA1ugAwIBAgIUVl0TXS1NTKZy68+AFpfvCBbs3JwwDQYJKoZIhvcNAQEL
-BQAwQTELMAkGA1UEBhMCVVMxEzARBgNVBAgMCkNhbGlmb3JuaWExDTALBgNVBAoM
-BE9OQVAxDjAMBgNVBAsMBU9TQUFGMB4XDTIxMDMxNjE1MjA1MloXDTQxMDMxMTE1
-MjA1MlowQTELMAkGA1UEBhMCVVMxEzARBgNVBAgMCkNhbGlmb3JuaWExDTALBgNV
-BAoMBE9OQVAxDjAMBgNVBAsMBU9TQUFGMIICIjANBgkqhkiG9w0BAQEFAAOCAg8A
-MIICCgKCAgEA1NdArmwTe6C9NZnMAPP0uvy9IH/+Lc9dgO9+j6F+JqLDXn+O5vaj
-6EMU5o60sGzymbMdwk26jiR7KYG8puZzI0EsjwELrLV5NYrUR1y7g+sbJWFUiB0X
-SseifQD9bSG0YBX7J6bQEilh18+oWpXIygl8/VJuiuDhaYdakmwn9AxQRm/zRDcI
-tMS49gq7ARpwMrZaZkQ5eL2R0eX4yj915fAgsvLNmfNTkkTCTBuGYAfixz2+uz8r
-4xZqxXrln6CVe6pV5MOxxQsJq0QfSfNxKFqhVJTSj3STG8UDKDPIcTqVLS6v3/iY
-WX43pHuqjfrGLy3HjPCIWphsx9EWq02bnLvwsnibRgfXjZNbdhePOZV8Xd+4MfHy
-uyFRf5xHvQm3f3vLtCQ1rmHk/3wb2Mb1SbTGt6sL6Waqs/VnnPyTwhXJk6RnU991
-qAnqSCLzKNEPNnpSTQKU35NPbdCAw/z97K5Ar8JWH2XiM65dV0j0d/Ura0PXUXRN
-Royi7rREJKBMFszwxqCCHZkH6/Fbs8vmBWC1gLQgDqK+IgU1/+ytUPOsMVqPcNjM
-RrZyd8xCoxEyd+Ly6y2EF9RE6qS/rlW/yUh3AIBlpcsVxc+Kh1nvNRLLJzHvrvSs
-wvd6LpWHVaffO02hp3suXDwOtLq91lAHLA48iDty/Js+jFjohZJ/+LsCAwEAAaNj
-MGEwHQYDVR0OBBYEFMeiRem06VRh0sL0L5k9B5A01QAoMB8GA1UdIwQYMBaAFMei
-Rem06VRh0sL0L5k9B5A01QAoMA8GA1UdEwEB/wQFMAMBAf8wDgYDVR0PAQH/BAQD
-AgGGMA0GCSqGSIb3DQEBCwUAA4ICAQBGdpwWyOIw7jBkEJbheeje8ccc51Z0SY/8
-oo/cYi9cI2SNtE4yt9SOZtXiWO1ga1PuFP5vNkPZu3MtqtsDt8CsSgYfgCKX1DH4
-RloTJJO73UKuMmnoqHNsuE6rHRrcoqcV8XJJ9uBz2cDVWfVDG5Pf92lB1cLQ5AGb
-X7O7MKNHu4woFdbbI8f3TN6Qx5oAcrS1alLMuPJhIkwcHuiWdjJuORx2MK4K9gov
-yRJceVyqMiTr7GGYFi/FQKIzIaHeKgQy+YGLfQ1GcbUmVItU4aQMfSM2RXb7wJ90
-XBFi0NjXZfMXVZ9kxqIki/s6NefrDAOFjHINUxGucXjEw1raewprErlsNt/8SUKT
-EDSLe1YD558jzUaqVdWinL6gMRTyyHOwt/51mg4sn3i2WLdL1Hno4F7GUIbkBmi5
-VSDDWnXdpwaFWeqA8JAvy+JIh+Ju671U1HhB68lGRvNOgfZbvW3m8GGpXldR5krR
-OYhwbxdU1rNYHH+DJ0KE4L1Y6es/571+UH7NFbvO6jAk9G/Fudel+SwhXVfFo0pi
-mmXAwT2bmDEiYBzDNHFwyT3+OGKXiDXuMvMB9ic7p3Zk9X0mRtpubW1gfZvUqIqe
-jaVeZdad0DX1yfjwi5zYT+ViI7pjXVYlgiBAnjMrEmWOpRcs793F5zBiyDjaUNFt
-3arVcS9XgA==
------END CERTIFICATE-----
\ No newline at end of file
+++ /dev/null
-# ============LICENSE_START===================================================
-# Copyright (C) 2019-2021 Nordix Foundation.
-# ============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=====================================================
-
-import certifi
-import os
-
-
-def add_onap_ca_cert():
- cafile = certifi.where()
- dir_path = os.path.dirname(os.path.realpath(__file__))
- datarouter_ca = dir_path + '/onap_ca_cert.pem'
- with open(datarouter_ca, 'rb') as infile:
- customca = infile.read()
-
- with open(cafile, 'ab') as outfile:
- outfile.write(customca)
-
- print("Added DR Cert to CA")
-
-
-def remove_onap_ca_cert():
- cafile = certifi.where()
- number_of_lines_to_delete = 40
- count = 0
- dr_cert_exists = False
-
- with open(cafile, 'r+b', buffering=0) as outfile:
- for line in outfile.readlines()[-36:-35]:
- if '# Serial: 0x9EAEEDC0A7CEB59D'.encode() in line:
- dr_cert_exists = True
- if dr_cert_exists:
- outfile.seek(0, os.SEEK_END)
- end = outfile.tell()
- while outfile.tell() > 0:
- outfile.seek(-1, os.SEEK_CUR)
- char = outfile.read(1)
- if char == b'\n':
- count += 1
- if count == number_of_lines_to_delete:
- outfile.truncate()
- print(
- "Removed " + str(number_of_lines_to_delete) + " lines from end of CA File")
- exit(0)
- outfile.seek(-1, os.SEEK_CUR)
- else:
- print("No DR cert in CA File to remove")
-
- if count < number_of_lines_to_delete + 1:
- print("Number of lines in file less than number of lines to delete. Exiting...")
- exit(1)
"dmaap_info": {
"client_id": "1475976809466",
"client_role": "org.onap.dcae.pmPublisher",
- "topic_url": "http://dmaap:3904/events/unauthenticated.DCAE_CL_OUTPUT",
+ "topic_url": "http://dmaap-mr:3904/events/unauthenticated.DCAE_CL_OUTPUT",
"location": "san-francisco"
},
"type": "message_router"
"dmaap_info": {
"client_id": "1575976809466",
"client_role": "org.onap.dcae.aaiSub",
- "topic_url": "http://dmaap:3904/events/AAI_EVENT",
+ "topic_url": "http://dmaap-mr:3904/events/AAI_EVENT",
"location": "san-francisco"
}
},
"policy_pm_subscriber": {
"dmaap_info": {
"location": "san-francisco",
- "topic_url": "http://dmaap:3904/events/unauthenticated.PMSH_CL_INPUT",
+ "topic_url": "http://dmaap-mr:3904/events/unauthenticated.PMSH_CL_INPUT",
"client_role": "org.onap.dcae.pmSubscriber",
"client_id": "1575876809456"
},
Library Process
Resource ../../common.robot
-
-Test Setup CreateSessions
Test Teardown Delete All Sessions
[Tags] PMSH_02
[Documentation] Verify database has been created and is empty
[Timeout] 10 seconds
- ${resp}= Get Request pmsh_session ${SUBSCRIPTIONS_ENDPOINT}
+ ${resp}= GetSubsCall ${SUBSCRIPTIONS_ENDPOINT}
Should Be True ${resp.status_code} == 200
Should Contain ${resp.text} []
[Documentation] Verify PNF detected when administrative state unlocked
[Timeout] 60 seconds
SetAdministrativeStateToUnlocked
- Sleep 31 Allow PMSH time to pick up changes in CBS config
- ${resp}= Get Request pmsh_session ${SUBSCRIPTIONS_ENDPOINT}
+ Sleep 31 Allow PMSH time to pick up changes in CBS config
+ ${resp}= GetSubsCall ${SUBSCRIPTIONS_ENDPOINT}
Should Be Equal As Strings ${resp.json()[0]['subscription_status']} UNLOCKED
Should Be Equal As Strings ${resp.json()[0]['network_functions'][0]['nf_name']} pnf-existing
Should Be Equal As Strings ${resp.json()[0]['network_functions'][0]['nf_sub_status']} PENDING_CREATE
[Timeout] 60 seconds
SimulatePolicyResponse ${MR_POLICY_RESPONSE_PNF_EXISTING}
Sleep 31 seconds Ensure Policy response on MR is picked up
- ${resp}= Get Request pmsh_session ${SUBSCRIPTIONS_ENDPOINT}
+ ${resp}= GetSubsCall ${SUBSCRIPTIONS_ENDPOINT}
Should Be Equal As Strings ${resp.json()[0]['network_functions'][0]['nf_sub_status']} CREATED
Verify AAI event on MR detailing new PNF being detected is handled
[Timeout] 60 seconds
SimulateNewPNF ${MR_AAI_PNF_CREATED}
Sleep 31 seconds Ensure AAI event on MR is picked up
- ${resp}= Get Request pmsh_session ${SUBSCRIPTIONS_ENDPOINT}
+ ${resp}= GetSubsCall ${SUBSCRIPTIONS_ENDPOINT}
Should Be Equal As Strings ${resp.json()[0]['network_functions'][1]['nf_name']} pnf_newly_discovered
Should Be Equal As Strings ${resp.json()[0]['network_functions'][1]['nf_sub_status']} PENDING_CREATE
[Timeout] 60 seconds
SimulateDeletedPNF ${MR_AAI_PNF_REMOVED}
Sleep 31 seconds Ensure AAI event on MR is picked up
- ${resp}= Get Request pmsh_session ${SUBSCRIPTIONS_ENDPOINT}
+ ${resp}= GetSubsCall ${SUBSCRIPTIONS_ENDPOINT}
Should Not Contain ${resp.text} pnf_newly_discovered
*** Keywords ***
-CreateSessions
- Create Session pmsh_session ${PMSH_BASE_URL}
- Create Session mr_sim_session ${MR_BASE_URL}
- Create Session cbs_sim_session ${CBS_BASE_URL}
-
SetAdministrativeStateToUnlocked
${data}= Get Data From File ${CBS_EXPECTATION_ADMIN_STATE_UNLOCKED}
- ${resp} = Put Request cbs_sim_session /clear data={"path": "/service_component_all/.*"}
+ Create Session cbs_sim_session ${CBS_BASE_URL} verify=false
+ ${resp}= PUT On Session cbs_sim_session url=/clear data={"path": "/service_component_all/.*"}
Should Be True ${resp.status_code} == 200
- Sleep 2 Allow CBS time to set expectation
- ${resp} = Put Request cbs_sim_session /expectation data=${data}
+ Sleep 2 Allow CBS time to set expectation
+ ${resp} = PUT On Session cbs_sim_session url=/expectation data=${data}
Should Be True ${resp.status_code} == 201
SimulatePolicyResponse
[Arguments] ${expected_contents}
${json_value}= json_from_file ${expected_contents}
- ${resp}= PostCall ${POLICY_PUBLISH_MR_TOPIC} ${json_value}
+ ${resp}= PostMrCall ${POLICY_PUBLISH_MR_TOPIC} ${json_value}
log ${resp.text}
Should Be Equal As Strings ${resp.status_code} 200
${count}= Evaluate $resp.json().get('count')
SimulateNewPNF
[Arguments] ${expected_contents}
${json_value}= json_from_file ${expected_contents}
- ${resp}= PostCall ${AAI_MR_TOPIC} ${json_value}
+ ${resp}= PostMrCall ${AAI_MR_TOPIC} ${json_value}
log ${resp.text}
Should Be Equal As Strings ${resp.status_code} 200
${count}= Evaluate $resp.json().get('count')
SimulateDeletedPNF
[Arguments] ${expected_contents}
${json_value}= json_from_file ${expected_contents}
- ${resp}= PostCall ${AAI_MR_TOPIC} ${json_value}
+ ${resp}= PostMrCall ${AAI_MR_TOPIC} ${json_value}
log ${resp.text}
Should Be Equal As Strings ${resp.status_code} 200
${count}= Evaluate $resp.json().get('count')
log 'JSON Response Code:'${resp}
-PostCall
+PostMrCall
[Arguments] ${url} ${data}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
- ${resp}= Post Request mr_sim_session ${url} json=${data} headers=${headers}
- [Return] ${resp}
+ Create Session mr_sim_session ${MR_BASE_URL} verify=false
+ ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
+ ${resp}= POST On Session mr_sim_session url=${url} json=${data} headers=${headers}
+ [Return] ${resp}
+
+GetSubsCall
+ [Arguments] ${url}
+ Create Session pmsh_session ${PMSH_BASE_URL} verify=false
+ ${resp}= GET On Session pmsh_session url=${url}
+ [Return] ${resp}
+++ /dev/null
-*** Settings ***
-Documentation dmaap-buscontroller - dr
+++ /dev/null
-*** Settings ***
-Resource ../../common.robot
-Library Collections
-Library json
-Library OperatingSystem
-Library RequestsLibrary
-Library HttpLibrary.HTTP
-Library String
-
-
-*** Variables ***
-${DBC_URI} webapi
-${DBC_URL} http://${DMAAPBC_IP}:8080/${DBC_URI}
-${LOC} csit-sanfrancisco
-${FEED1_DATA} { "feedName":"feed1", "feedVersion": "csit", "feedDescription":"generated for CSIT", "owner":"dgl", "asprClassification": "unclassified" }
-${FEED2_DATA} { "feedName":"feed2", "feedVersion": "csit", "feedDescription":"generated for CSIT", "owner":"dgl", "asprClassification": "unclassified" }
-${PUB2_DATA} { "dcaeLocationName": "${LOC}", "username": "pub2", "userpwd": "topSecret123", "feedId": "2" }
-${SUB2_DATA} { "dcaeLocationName": "${LOC}", "username": "sub2", "userpwd": "someSecret123", "deliveryURL": "https://${DMAAPBC_IP}:8443/webapi/noURI", "feedId": "2" }
-
-
-*** Test Cases ***
-(DMAAP-441c1)
- [Documentation] Create Feed w no clients POST ${DBC_URI}/feeds endpoint
- ${resp}= PostCall ${DBC_URL}/feeds ${FEED1_DATA}
- Should Be Equal As Integers ${resp.status_code} 200
-
-(DMAAP-441c2)
- [Documentation] Create Feed w clients POST ${DBC_URI}/feeds endpoint
- ${resp}= PostCall ${DBC_URL}/feeds ${FEED2_DATA}
- Should Be Equal As Integers ${resp.status_code} 200
-
-(DMAAP-441c3)
- [Documentation] Add Publisher to existing feed
- ${resp}= PostCall ${DBC_URL}/dr_pubs ${PUB2_DATA}
- Should Be Equal As Integers ${resp.status_code} 201
- ${JSON}= Evaluate json.loads(r"""${resp.content}""", strict=False)
- ${result}= Set Variable ${JSON['pubId']}
- Set Suite Variable ${pubId} ${result}
-
-(DMAAP-441c4)
- [Documentation] Add Subscriber to existing feed
- ${resp}= PostCall ${DBC_URL}/dr_subs ${SUB2_DATA}
- Should Be Equal As Integers ${resp.status_code} 201
- ${JSON}= Evaluate json.loads(r"""${resp.content}""", strict=False)
- ${result}= Set Variable ${JSON['subId']}
- Set Suite Variable ${subId} ${result}
-
-(DMAAP-443)
- [Documentation] List existing feeds
- Create Session get ${DBC_URL}
- ${resp}= GET On Session get /feeds
- Should Be Equal As Integers ${resp.status_code} 200
-
-(DMAAP-444)
- [Documentation] Delete existing subscriber
- ${resp}= DelCall ${DBC_URL}/dr_subs/${subId}
- Should Be Equal As Integers ${resp.status_code} 204
-
-(DMAAP-445)
- [Documentation] Delete existing publisher
- ${resp}= DelCall ${DBC_URL}/dr_pubs/${pubId}
- Should Be Equal As Integers ${resp.status_code} 204
-
-
-*** Keywords ***
-PostCall
- [Arguments] ${url} ${data}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
- ${resp}= Evaluate requests.post('${url}',data='${data}', headers=${headers},verify=False) requests
- [Return] ${resp}
-
-DelCall
- [Arguments] ${url}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
- ${resp}= Evaluate requests.delete('${url}', headers=${headers},verify=False) requests
- [Return] ${resp}
+++ /dev/null
-*** Settings ***
-Documentation dmaap-buscontroller - mr
-
+++ /dev/null
-*** Settings ***
-Resource ../../common.robot
-Library Collections
-Library json
-Library OperatingSystem
-Library RequestsLibrary
-Library HttpLibrary.HTTP
-Library String
-
-
-*** Variables ***
-${DBC_URI} webapi
-${DBC_URL} http://${DMAAP_BC_IP}:8080/${DBC_URI}
-${TOPIC_NS} org.onap.dmaap.onapCSIT
-${LOC} csit-sanfrancisco
-${PUB_CORE} "dcaeLocationName": "${LOC}", "clientRole": "org.onap.dmaap.client.pub", "action": [ "pub", "view" ]
-${SUB_CORE} "dcaeLocationName": "${LOC}", "clientRole": "org.onap.dmaap.client.sub", "action": [ "sub", "view" ]
-${PUB} { ${PUB_CORE} }
-${SUB} { ${SUB_CORE} }
-${TOPIC1_DATA} { "topicName":"singleMRtopic1", "topicDescription":"generated for CSIT", "owner":"dgl"}
-${TOPIC2_DATA} { "topicName":"singleMRtopic2", "topicDescription":"generated for CSIT", "owner":"dgl", "clients": [ ${PUB}, ${SUB}] }
-${TOPIC3_DATA} { "topicName":"singleMRtopic3", "topicDescription":"generated for CSIT", "owner":"dgl"}
-${PUB3_DATA} { "fqtn": "${TOPIC_NS}.singleMRtopic3", ${PUB_CORE} }
-${SUB3_DATA} { "fqtn": "${TOPIC_NS}.singleMRtopic3", ${SUB_CORE} }
-
-
-*** Test Cases ***
-(DMAAP-293)
- [Documentation] Create Topic w no clients POST ${DBC_URI}/topics endpoint
- ${resp}= PostCall ${DBC_URL}/topics ${TOPIC1_DATA}
- Should Be Equal As Integers ${resp.status_code} 201
-
-(DMAAP-294)
- [Documentation] Create Topic w pub and sub clients POST ${DBC_URI}/topics endpoint
- ${resp}= PostCall ${DBC_URL}/topics ${TOPIC2_DATA}
- Should Be Equal As Integers ${resp.status_code} 201
-
-(DMAAP-295)
- [Documentation] Create Topic w no clients and then add a client POST ${DBC_URI}/mr_clients endpoint
- ${resp}= PostCall ${DBC_URL}/topics ${TOPIC3_DATA}
- Should Be Equal As Integers ${resp.status_code} 201
- ${resp}= PostCall ${DBC_URL}/mr_clients ${PUB3_DATA}
- Should Be Equal As Integers ${resp.status_code} 200
- ${resp}= PostCall ${DBC_URL}/mr_clients ${SUB3_DATA}
- Should Be Equal As Integers ${resp.status_code} 200
-
-(DMAAP-297)
- [Documentation] Query for all topics and specific topic
- Create Session get ${DBC_URL}
- ${resp}= GET On Session get /topics
- Should Be Equal As Integers ${resp.status_code} 200
- ${resp}= GET On Session get /topics/${TOPIC_NS}.singleMRtopic3
- Should Be Equal As Integers ${resp.status_code} 200
-
-(DMAAP-301)
- [Documentation] Delete a subscriber
- Create Session get ${DBC_URL}
- ${resp}= GET On Session get /topics/${TOPIC_NS}.singleMRtopic3
- Should Be Equal As Integers ${resp.status_code} 200
- ${JSON}= Evaluate json.loads(r"""${resp.content}""", strict=False)
- ${clientId}= Set Variable ${JSON['clients'][1]['mrClientId']}
- ${resp}= DelCall ${DBC_URL}/mr_clients/${clientId}
- Should Be Equal As Integers ${resp.status_code} 204
-
-(DMAAP-302)
- [Documentation] Delete a publisher
- Create Session get ${DBC_URL}
- ${resp}= GET On Session get /topics/${TOPIC_NS}.singleMRtopic3
- Should Be Equal As Integers ${resp.status_code} 200
- ${JSON}= Evaluate json.loads(r"""${resp.content}""", strict=False)
- ${clientId}= Set Variable ${JSON['clients'][0]['mrClientId']}
- ${resp}= DelCall ${DBC_URL}/mr_clients/${clientId}
- Should Be Equal As Integers ${resp.status_code} 204
-
-
-*** Keywords ***
-PostCall
- [Arguments] ${url} ${data}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
- ${resp}= Evaluate requests.post('${url}',data='${data}', headers=${headers},verify=False) requests
- [Return] ${resp}
-
-DelCall
- [Arguments] ${url}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
- ${resp}= Evaluate requests.delete('${url}', headers=${headers},verify=False) requests
- [Return] ${resp}
+++ /dev/null
-*** Settings ***
-Library OperatingSystem
-Library RequestsLibrary
-Library requests
-Library Collections
-Library Process
-Library String
-
-*** Variables ***
-${TARGET_URL} https://dmaap-dr-prov:8443/
-${TARGET_URL_FEED} https://dmaap-dr-prov:8443/feed/1
-${TARGET_URL_EXISTS_LOGGING} https://dmaap-dr-prov:8443/feedlog/1?type=pub&filename=csit_test
-${TARGET_URL_NOT_EXISTS_LOGGING} https://dmaap-dr-prov:8443/feedlog/1?type=pub&filename=file_that_doesnt_exist
-${TARGET_URL_SUBSCRIBE} https://dmaap-dr-prov:8443/subscribe/1
-${TARGET_URL_SUBSCRIPTION} https://dmaap-dr-prov:8443/subs/1
-${TARGET_URL_PUBLISH_PROV} https://dmaap-dr-prov:8443/publish/1/csit_test
-${TARGET_URL_PUBLISH_NODE} https://dmaap-dr-node:8443/publish/1/csit_test
-${TARGET_URL_DELETE_FILE} https://dmaap-dr-node:8443/delete/2
-
-${FEED_CONTENT_TYPE} application/vnd.dmaap-dr.feed
-${SUBSCRIBE_CONTENT_TYPE} application/vnd.dmaap-dr.subscription
-${PUBLISH_FEED_CONTENT_TYPE} application/octet-stream
-
-${CREATE_FEED_DATA} {"name": "CSIT_Test", "version": "m1.0", "description": "CSIT_Test", "business_description": "CSIT_Test", "suspend": false, "deleted": false, "changeowner": true, "authorization": {"classification": "unclassified", "endpoint_addrs": [], "endpoint_ids": [{"password": "dradmin", "id": "dradmin"}]}}
-${UPDATE_FEED_DATA} {"name": "CSIT_Test", "version": "m1.0", "description": "UPDATED-CSIT_Test", "business_description": "CSIT_Test", "suspend": true, "deleted": false, "changeowner": true, "authorization": {"classification": "unclassified", "endpoint_addrs": [], "endpoint_ids": [{"password": "dradmin", "id": "dradmin"}]}}
-${SUBSCRIBE_DATA} {"delivery":{ "url":"http://${DR_SUB_IP}:7070/", "user":"LOGIN", "password":"PASSWORD", "use100":true}, "metadataOnly":false, "suspend":false, "groupid":29, "subscriber":"dradmin", "privilegedSubscriber":false}
-${UPDATE_SUBSCRIPTION_DATA} {"delivery":{ "url":"http://${DR_SUB_IP}:7070/", "user":"dradmin", "password":"dradmin", "use100":true}, "metadataOnly":false, "suspend":true, "groupid":29, "subscriber":"dradmin", "privilegedSubscriber":false}
-${SUBSCRIBE2_DATA} {"delivery":{ "url":"http://${DR_SUB2_IP}:7070/", "user":"LOGIN", "password":"PASSWORD", "use100":true}, "metadataOnly":false, "suspend":false, "groupid":29, "subscriber":"privileged", "privilegedSubscriber":true}
-
-${CLI_VERIFY_SUB_RECEIVED_FILE} docker exec subscriber-node /bin/sh -c "ls /opt/app/subscriber/delivery | grep csit_test"
-${CLI_VERIFY_FILE_REMAINS_ON_NODE} docker exec datarouter-node /bin/sh -c "ls /opt/app/datartr/spool/s/0/2 | grep dmaap-dr-node | grep -v .M"
-
-*** Test Cases ***
-Run Feed Creation
- [Documentation] Feed Creation
- [Timeout] 1 minute
- ${resp}= PostCall ${TARGET_URL} ${CREATE_FEED_DATA} ${FEED_CONTENT_TYPE} dradmin
- log ${TARGET_URL}
- log ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 201
- log 'JSON Response Code:'${resp}
-
-Run Subscribe to Feed
- [Documentation] Subscribe to Feed
- [Timeout] 1 minute
- ${resp}= PostCall ${TARGET_URL_SUBSCRIBE} ${SUBSCRIBE_DATA} ${SUBSCRIBE_CONTENT_TYPE} dradmin
- log ${TARGET_URL_SUBSCRIBE}
- log ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 201
- log 'JSON Response Code:'${resp}
-
-Run Subscribe to Feed with Privileged Subscription
- [Documentation] Subscribe to Feed with privileged subscription
- [Timeout] 1 minute
- ${resp}= PostCall ${TARGET_URL_SUBSCRIBE} ${SUBSCRIBE2_DATA} ${SUBSCRIBE_CONTENT_TYPE} privileged
- log ${TARGET_URL_SUBSCRIBE}
- log ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 201
- log 'JSON Response Code:'${resp}
-
-Run Publish to Feed
- [Documentation] Publish to Feed
- [Timeout] 1 minute
- Sleep 10s Behaviour was noticed where feed was not created in time for publish to be sent
- ${resp}= PutCall ${TARGET_URL_PUBLISH_PROV} ${CREATE_FEED_DATA} ${PUBLISH_FEED_CONTENT_TYPE} dradmin
- log ${TARGET_URL_PUBLISH_PROV}
- Should Contain ${resp.headers['Location']} https://dmaap-dr-node:8443/publish/1/csit_test
- ${resp}= PutCall ${TARGET_URL_PUBLISH_NODE} ${CREATE_FEED_DATA} ${PUBLISH_FEED_CONTENT_TYPE} dradmin
- Should Be Equal As Strings ${resp.status_code} 204
- log 'JSON Response Code:'${resp}
-
-Verify Subscriber Received Published File
- [Documentation] Verify file is delivered to datarouter-subscriber
- [Timeout] 1 minute
- Sleep 5s Time to allow subscriber to receive the file
- ${cli_cmd_output}= Run Process ${CLI_VERIFY_SUB_RECEIVED_FILE} shell=yes
- Log ${cli_cmd_output.stdout}
- Should Be Equal As Strings ${cli_cmd_output.rc} 0
- Should Contain ${cli_cmd_output.stdout} csit_test
-
-
-Verify File Remains On Privileged Subscriber And Delete It
- [Documentation] Verify file has not been deleted on datarouter-node and delete it using DELETE API
- [Timeout] 1 minute
- ${cli_cmd_output}= Run Process ${CLI_VERIFY_FILE_REMAINS_ON_NODE} shell=yes
- log ${cli_cmd_output.stdout}
- Should Be Equal As Strings ${cli_cmd_output.rc} 0
- Should Contain ${cli_cmd_output.stdout} dmaap-dr-node
- ${resp}= DeleteCall ${TARGET_URL_DELETE_FILE}/${cli_cmd_output.stdout} dradmin
- Should Be Equal As Strings ${resp.status_code} 200
- log 'JSON Response Code:'${resp}
- ${cli_cmd_output}= Run Process ${CLI_VERIFY_FILE_REMAINS_ON_NODE} shell=yes
- log ${cli_cmd_output.stdout}
- Should Be Equal As Strings ${cli_cmd_output.rc} 1
-
-Run Update Subscription
- [Documentation] Update Subscription to suspend and change delivery credentials
- [Timeout] 1 minute
- ${resp}= PutCall ${TARGET_URL_SUBSCRIPTION} ${UPDATE_SUBSCRIPTION_DATA} ${SUBSCRIBE_CONTENT_TYPE} dradmin
- log ${TARGET_URL_SUBSCRIPTION}
- log ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 200
- log 'JSON Response Code:'${resp}
- ${resp}= GetCall ${TARGET_URL_SUBSCRIPTION} ${SUBSCRIBE_CONTENT_TYPE} dradmin
- log ${resp.text}
- Should Contain ${resp.text} "password":"dradmin","user":"dradmin"
- log 'JSON Response Code:'${resp}
-
-Run Update Feed
- [Documentation] Update Feed description and suspend
- [Timeout] 1 minute
- ${resp}= PutCall ${TARGET_URL_FEED} ${UPDATE_FEED_DATA} ${FEED_CONTENT_TYPE} dradmin
- log ${TARGET_URL_FEED}
- log ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 200
- log 'JSON Response Code:'${resp}
- ${resp}= GetCall ${TARGET_URL_FEED} ${FEED_CONTENT_TYPE} dradmin
- log ${resp.text}
- Should Contain ${resp.text} "UPDATED-CSIT_Test"
- log 'JSON Response Code:'${resp}
-
-Run Get With Filename That Exists
- [Documentation] Get publish record with a specified filename
- [Timeout] 2 minutes
- sleep 1 minute 45 seconds needed to ensure logs have been updated
- ${resp}= GetCall ${TARGET_URL_EXISTS_LOGGING} ${FEED_CONTENT_TYPE} dradmin
- log ${resp.text}
- Should Contain ${resp.text} "fileName":"csit_test"
- log 'JSON Response Code:'${resp}
-
-Run Get With Filename That Doesnt Exist
- [Documentation] Get publish record with a specified filename
- [Timeout] 1 minute
- ${resp}= GetCall ${TARGET_URL_NOT_EXISTS_LOGGING} ${FEED_CONTENT_TYPE} dradmin
- log ${resp.text}
- Should Contain ${resp.text} []
- log 'JSON Response Code:'${resp}
-
-
-Run Delete Subscription
- [Documentation] Delete Subscription
- [Timeout] 1 minute
- ${resp}= DeleteCall ${TARGET_URL_SUBSCRIPTION} dradmin
- log ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 204
- log 'JSON Response Code:'${resp}
-
-Run Delete Feed
- [Documentation] Delete Feed
- [Timeout] 1 minute
- ${resp}= DeleteCall ${TARGET_URL_FEED} dradmin
- log ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 204
- log 'JSON Response Code:'${resp}
-
-*** Keywords ***
-PostCall
- [Arguments] ${url} ${data} ${content_type} ${user}
- ${headers}= Create Dictionary X-DMAAP-DR-ON-BEHALF-OF=${user} Content-Type=${content_type}
- ${resp}= Evaluate requests.post('${url}', data='${data}', headers=${headers}, verify=True) requests
- [Return] ${resp}
-
-PutCall
- [Arguments] ${url} ${data} ${content_type} ${user}
- ${headers}= Create Dictionary X-DMAAP-DR-ON-BEHALF-OF=${user} Content-Type=${content_type} Authorization=Basic ZHJhZG1pbjpkcmFkbWlu
- ${resp}= Evaluate requests.put('${url}', data='${data}', headers=${headers}, verify=True, allow_redirects=False) requests
- [Return] ${resp}
-
-GetCall
- [Arguments] ${url} ${content_type} ${user}
- ${headers}= Create Dictionary X-DMAAP-DR-ON-BEHALF-OF=${user} Content-Type=${content_type}
- ${resp}= Evaluate requests.get('${url}', headers=${headers}, verify=True) requests
- [Return] ${resp}
-
-DeleteCall
- [Arguments] ${url} ${user}
- ${headers}= Create Dictionary X-DMAAP-DR-ON-BEHALF-OF=${user}
- ${resp}= Evaluate requests.delete('${url}', headers=${headers}, verify=True) requests
- [Return] ${resp}
Code Review / integration / csit.git / commitdiff