plans/usecases/pnf-sw-upgrade/so/config/populate-aai-simulator.sh

   1 #!/bin/bash
   2 #
   3 # ============LICENSE_START=======================================================
   4 #  Copyright (C) 2019 Nordix Foundation.
   5 # ================================================================================
   6 # Licensed under the Apache License, Version 2.0 (the "License");
   7 # you may not use this file except in compliance with the License.
   8 # You may obtain a copy of the License at
   9 #
  10 #      http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 # Unless required by applicable law or agreed to in writing, software
  13 # distributed under the License is distributed on an "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 # See the License for the specific language governing permissions and
  16 # limitations under the License.
  17 #
  18 # SPDX-License-Identifier: Apache-2.0
  19 # ============LICENSE_END=========================================================
  20 #
  21
  22 # @author Gareth Roper (gareth.roper@est.tech)
  23 # @auther Waqas Ikram (waqas.ikram@est.tech)
  24
  25 SCRIPT_NAME=$(basename $0)
  26 SCRIPT_HOME="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
  27 WAIT_FOR_SCRIPT=$SCRIPT_HOME/wait-for.sh
  28
  29 current_timestamp()
  30 {
  31  date +"%Y-%m-%d %H:%M:%S"
  32 }
  33
  34 populate_aai_simulator()
  35 {
  36  $WAIT_FOR_SCRIPT -t "$TIMEOUT_IN_SECONDS" -h "$AAI_SIMULATOR_HOST" -p "$AAI_SIMULATOR_PORT"
  37
  38  if [ $?  -eq 0 ]
  39  then
  40      echo "$SCRIPT_NAME $(current_timestamp): AAI Simulator is Running."
  41  else
  42      echo "$SCRIPT_NAME $(current_timestamp): AAI Simulator could not be found. Exiting..."
  43      exit 1
  44  fi
  45
  46  BASE_URL="https://$AAI_SIMULATOR_HOST:$AAI_SIMULATOR_PORT/aai/v15"
  47  BASIC_AUTHORIZATION_HEADER="Authorization: Basic YWFpOmFhaS5vbmFwLm9yZzpkZW1vMTIzNDU2IQ=="
  48  APPICATION_JSON="application/json"
  49  ACCEPT_HEADER="Accept: $APPICATION_JSON"
  50  CONTENT_TYPE_HEADER="Content-Type: $APPICATION_JSON"
  51  CURL_COMMAND="curl -k -H $BASIC_AUTHORIZATION_HEADER -H $ACCEPT_HEADER -H $CONTENT_TYPE_HEADER"
  52
  53  AAI_SIMULATOR_DATA_DIR=$SCRIPT_HOME/aai-simulator-populate-data
  54  CUSTOMER_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/customer.json
  55  PROJECT_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/project.json
  56  OWNING_ENTITY_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/owning-entity.json
  57  LINE_OF_BUSINESS_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/line-of-business.json
  58  PLATFORM_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/platform.json
  59  CLOUD_REGION_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/cloud-region.json
  60  TENANT_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/tenant.json
  61  ESR_VNFM_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/esr-vnfm.json
  62  ESR_SYSTEM_INFO_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/esr-system-info.json
  63  CLOUD_ESR_SYSTEM_INFO_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/cloud-esr-system-info.json
  64  PNF_JSON_FILE=$AAI_SIMULATOR_DATA_DIR/pnf.json
  65  STATUS_CODE_ACCEPTED="202"
  66
  67  echo "$SCRIPT_NAME $(current_timestamp): checking health of AAI Simulator"
  68  response=$(curl -k $BASE_URL/healthcheck)
  69
  70  if [[ "$response" -ne "healthy" ]] ; then
  71        echo "$SCRIPT_NAME $(current_timestamp) ERROR: AAI Simulator health check failed. Response: $response"
  72        exit 1
  73  fi
  74
  75  echo "$SCRIPT_NAME $(current_timestamp): AAI Simulator is healthy"
  76
  77  echo "$SCRIPT_NAME $(current_timestamp): Populating AAI Simulator"
  78
  79  echo "$SCRIPT_NAME $(current_timestamp): Adding Cloud-Customer Data"
  80  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/business/customers/customer/DemoCustomer -X PUT -d @"$CUSTOMER_JSON_FILE")
  81
  82  if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
  83      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put customer data in AAI Simulator. Status code received: $status_code"
  84      exit 1
  85  fi
  86
  87  echo "$SCRIPT_NAME $(current_timestamp): Adding Project"
  88  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/business/projects/project/PnfSwUCsitProject -X PUT -d @"$PROJECT_JSON_FILE")
  89
  90  if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
  91      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put project data in AAI Simulator. Status code received: $status_code"
  92      exit 1
  93  fi
  94
  95   echo "$SCRIPT_NAME $(current_timestamp): Adding Owning-Entity"
  96   status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/business/owning-entities/owning-entity/f2e1071e-3d47-4a65-94d4-e473ec03326a -X PUT -d @$"$OWNING_ENTITY_JSON_FILE")
  97
  98   if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
  99      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put owning entity data in AAI Simulator. Status code received: $status_code"
 100      exit 1
 101  fi
 102
 103  echo "$SCRIPT_NAME $(current_timestamp): Adding Line Of Business"
 104  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/business/lines-of-business/line-of-business/PnfSwUCsitLineOfBusiness -X PUT -d @$"$LINE_OF_BUSINESS_JSON_FILE")
 105
 106  if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 107      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put line of business data in AAI Simulator. Status code received: $status_code"
 108      exit 1
 109  fi
 110
 111  echo "$SCRIPT_NAME $(current_timestamp): Adding Platform"
 112  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/business/platforms/platform/PnfSwUCsitPlatform -X PUT -d @$"$PLATFORM_JSON_FILE")
 113
 114  if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 115      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put platform data in AAI Simulator. Status code received: $status_code"
 116      exit 1
 117  fi
 118
 119  echo "$SCRIPT_NAME $(current_timestamp): Adding Cloud Region"
 120  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/cloud-infrastructure/cloud-regions/cloud-region/CloudOwner/PnfSwUCloudRegion -X PUT -d @$"$CLOUD_REGION_JSON_FILE")
 121
 122   if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 123      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put Cloud Region data in AAI Simulator. Status code received: $status_code"
 124      exit 1
 125  fi
 126
 127  echo "$SCRIPT_NAME $(current_timestamp): Adding Tenant"
 128   status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/cloud-infrastructure/cloud-regions/cloud-region/CloudOwner/PnfSwUCloudRegion/tenants/tenant/693c7729b2364a26a3ca602e6f66187d -X PUT -d @$"$TENANT_JSON_FILE")
 129
 130   if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 131      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put Tenant data in AAI Simulator. Status code received: $status_code"
 132      exit 1
 133  fi
 134
 135  echo "$SCRIPT_NAME $(current_timestamp): Adding esr-vnfm"
 136  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/external-system/esr-vnfm-list/esr-vnfm/c5e99cee-1996-4606-b697-838d51d4e1a3 -X PUT -d @$"$ESR_VNFM_JSON_FILE")
 137
 138   if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 139      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put esr-vnfm data in AAI Simulator. Status code received: $status_code"
 140      exit 1
 141  fi
 142
 143   echo "$SCRIPT_NAME $(current_timestamp): Adding esr-system-info"
 144  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/external-system/esr-vnfm-list/esr-vnfm/c5e99cee-1996-4606-b697-838d51d4e1a3/esr-system-info-list/esr-system-info/5c067098-f2e3-40f7-a7ba-155e7c61e916 -X PUT -d @$"$ESR_SYSTEM_INFO_JSON_FILE")
 145
 146   if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 147      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put esr-system-info data in AAI Simulator. Status code received: $status_code"
 148      exit 1
 149  fi
 150
 151   echo "$SCRIPT_NAME $(current_timestamp): Adding cloud esr-system-info"
 152  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/cloud-infrastructure/cloud-regions/cloud-region/CloudOwner/PnfSwUCloudRegion/esr-system-info-list/esr-system-info/e6a0b318-9756-4f11-94e8-919312d6c2bd -X PUT -d @$"$CLOUD_ESR_SYSTEM_INFO_JSON_FILE")
 153
 154   if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 155      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put cloud esr-system-info data in AAI Simulator. Status code received: $status_code"
 156      exit 1
 157  fi
 158
 159   echo "$SCRIPT_NAME $(current_timestamp): Adding PNF"
 160  status_code=$(curl -k --write-out %{http_code} --silent --output /dev/null -H "$BASIC_AUTHORIZATION_HEADER" -H "$ACCEPT_HEADER" -H "$CONTENT_TYPE_HEADER" $BASE_URL/network/pnfs/pnf/PNFDemo -X PUT -d @$"$PNF_JSON_FILE")
 161
 162   if [[ "$status_code" -ne "$STATUS_CODE_ACCEPTED" ]] ; then
 163      echo "$SCRIPT_NAME $(current_timestamp) ERROR: Unable to put PNF data in AAI Simulator. Status code received: $status_code"
 164      exit 1
 165  fi
 166
 167  echo "$SCRIPT_NAME $(current_timestamp): AAI Simulator Populated Successfully"
 168 }
 169
 170 # main body
 171 populate_aai_simulator