docs/guides/onap-user/control-loop/index.rst

   1 .. This work is licensed under a Creative Commons Attribution 4.0
   2 .. International License. http://creativecommons.org/licenses/by/4.0
   3 .. Copyright 2019 ONAP Contributors. All rights reserved.
   4
   5 Control Loop Design
   6 ===================
   7 **Goal:** Create and distribute closed-loop models for automating:
   8     * recovery of faults reported by traps or alarms
   9     * capacity management as performance thresholds are crossed
  10
  11 **Tool:** SDC/DCAE-DS/CLAMP
  12
  13 **SDC user role:** Designer
  14
  15 Closed loops use feedback to control and optimize their behavior.
  16 A closed loop can proactively respond to network and service conditions
  17 without human intervention.
  18
  19 There are different phases to the Closed Loop (CL) design:
  20
  21     #. Design a closed loop template and associate it to a Service,
  22        the template represents the theoretical flow of the CL. (DCAE-DS/SDC)
  23
  24        #. generate a deployment artifact that can be ingested by the DCAE,
  25           today it is a "cloudify" blueprint.
  26
  27     #. Distribute the control loop to CLAMP and DCAE, the csar is distributed
  28        to CLAMP, the blueprint is distributed to both CLAMP and DCAE. (SDC)
  29     #. Submit the closed loop, meaning provision Policy/DCAE with
  30        closed loop data. (CLAMP)
  31     #. Deploy the closed loop, it initiates the deployment of the micro
  32        service on DCAE side (CLAMP)
  33
  34 *Release 1 (Amsterdam)* includes control loop template designer in Clamp UI.
  35
  36 *Release 2 (Bejing)* does not include the control loop template designer
  37 in Clamp UI, this is implemented in DCAE-DS.
  38
  39 **Steps**
  40
  41         * `Design a Model`_
  42         * `Configure Collector`_
  43         * `Configure Alarm Detector`_
  44         * `Configure Data Analytics Function`_
  45         * `Configure Policy`_
  46         * `Distribute the Model`_
  47         * `Open Loop Design`_
  48
  49 Design a Model
  50 --------------
  51
  52 .. note::
  53    When required, contact the DCAE Group (see `Mailing Lists <https://wiki.onap.org/display/DW/Mailing+Lists>`_) to
  54    confirm that a blueprint for the Service has been generated and
  55    is available on DCAE.
  56
  57 **Prerequisites:** Create and test a VF
  58 (see :ref:`VF Creation and Testing <user-guides-service-design>`).
  59
  60     #. Create and name a new model
  61     #. Associate a Service with the model
  62     #. Based on the service, provide values for its attributes
  63     #. Select the Resource-VF and Resource-VFC to associate with the model
  64     #. Select one or more locations in the cloud where the
  65        closed loop will be deployed
  66     #. Here is a view of a hypothetical visual design tool
  67        showing loop modeling components:
  68
  69        |image0|
  70
  71     #. Use the tool to select and connect components,
  72        thus defining the structure of the model
  73     #. Configure each of the components of the model
  74
  75        #. `Configure Collector`_
  76        #. `Configure Alarm Detector`_
  77        #. `Configure Data Analytics Function`_
  78        #. `Configure Policy`_
  79
  80 Configure Collector
  81 -------------------
  82
  83 **Prerequisites:** `Design a Model`_.
  84
  85 Using the modeling tool, assign a message topic to which this
  86 component will subscribe.
  87
  88 Configure Alarm Detector
  89 ------------------------
  90
  91 **Prerequisites:** `Design a Model`_.
  92
  93 Using the modeling tool, configure the fields described in this table:
  94
  95 +------------+----------------------------+-------------------------------+
  96 | Field      | Values                     | Description                   |
  97 +============+============================+===============================+
  98 | Topic      | * DCAE-CL-EVENT            | DMAAP message topic to        |
  99 | Publishes  | * OPEN-DCAE-HIGHLANDPARK-  | which the component           |
 100 |            |   EVENT-OUTPUT             | subscribes.                   |
 101 +------------+----------------------------+-------------------------------+
 102 | Alarm      | (Multiple values)          | Populated from vendor-provided|
 103 | Condition  |                            | list of alarm names. Stored in|
 104 |            |                            | SDC and retrieved by the      |
 105 |            |                            | modeling tool. Alarms differ  |
 106 |            |                            | per VNF.                      |
 107 +------------+----------------------------+-------------------------------+
 108 | Event      | (Multiple values)          | Categories of alarms for a VNF|
 109 | Source Type|                            | .Differs per VNF.             |
 110 +------------+----------------------------+-------------------------------+
 111 | Event      | * NORMAL                   | Severity level of the alarm   |
 112 | Severity   | * not-NORMAL               | that caused the rule to match.|
 113 |            | * WARNING                  | All conditions are exact      |
 114 |            | * MINOR                    | matches, except for not-Normal|
 115 |            | * MAYOR                    | , which matches anything      |
 116 |            | * CRITICAL                 | except NORMAL.                |
 117 +------------+----------------------------+-------------------------------+
 118
 119
 120 Configure Data Analytics Function
 121 ---------------------------------
 122
 123 **Prerequisites:** `Design a Model`_.
 124
 125    #. In the model, click the *StringMatch*.
 126    #. Click the *Properties* icon.
 127    #. Configure fields as required (see table).
 128    #. Click *Close*.
 129
 130 +------------+----------------------------+-------------------------------+
 131 | Field      | Values                     | Description                   |
 132 +============+============================+===============================+
 133 | Topic      | * DCAE-CL-EVENT            | DMAAP message topic to        |
 134 | Publishes  |                            | which the component subscribes|
 135 +------------+----------------------------+-------------------------------+
 136 | AAI Fields | (Multiple values)          | Additional VM-related fields  |
 137 | Matching   |                            | that downstream elements such |
 138 +------------+                            | as Policy and APPC can use to |
 139 | AAI Field  |                            | take action on the signature. |
 140 | Send       |                            |                               |
 141 | (Select    |                            |                               |
 142 | Multiple)  |                            |                               |
 143 +------------+----------------------------+-------------------------------+
 144 | Resource-  | Integer                    | Group of string matching rules|
 145 | Group      |                            | that are to be treated        |
 146 |            |                            | together. For example, a      |
 147 |            |                            | resource group could contain  |
 148 |            |                            | two different traps that must |
 149 |            |                            | be received to produce a      |
 150 |            |                            | signature, as well as the     |
 151 |            |                            | abatement match.              |
 152 +------------+----------------------------+-------------------------------+
 153 | Alarm      | (Multiple values)          | Populated from vendor-provided|
 154 | Condition  |                            | list of alarm names. Stored in|
 155 |            |                            | SDC and retrieved by the      |
 156 |            |                            | modeling tool. Alarms differ  |
 157 |            |                            | per VNF.                      |
 158 +------------+----------------------------+-------------------------------+
 159 | Event      | * NORMAL                   | Severity level of the alarm   |
 160 | Severity   | * not-NORMAL               | that caused the rule to match.|
 161 |            | * WARNING                  | All conditions are exact      |
 162 |            | * MINOR                    | matches, except for not-Normal|
 163 |            | * MAYOR                    | , which matches anything      |
 164 |            | * CRITICAL                 | except NORMAL.                |
 165 +------------+----------------------------+-------------------------------+
 166 | Event      | (Multiple values)          | Categories of alarms for a    |
 167 | Source Type|                            | VNF. Differs per VNF.         |
 168 +------------+----------------------------+-------------------------------+
 169 | Time       | Integer                    | Interval during which multiple|
 170 | Window     |                            | traps must be received in     |
 171 |            |                            | order to produce a single     |
 172 |            |                            | signature. This value has no  |
 173 |            |                            | meaning if only one onset rule|
 174 |            |                            | exists. A value of 0 means an |
 175 |            |                            | unlimited time window.        |
 176 +------------+----------------------------+-------------------------------+
 177 | Age        | Integer                    | Traps older than this limit   |
 178 | Limit      |                            | are deemed too stale to be    |
 179 |            |                            | meaningful and are not        |
 180 |            |                            | processed.                    |
 181 +------------+----------------------------+-------------------------------+
 182 | Create CL  | * Initial                  | *Initial:* start a closed     |
 183 | Event ID   | * Close                    | loop with a new request ID    |
 184 |            |                            |                               |
 185 |            |                            | *Close:* end an existing      |
 186 |            |                            | closed loop (Close)           |
 187 +------------+----------------------------+-------------------------------+
 188 | Create CL  | * OnSet                    | *OnSet:* start a closed loop  |
 189 | Event ID   | * Abatement                | when a condition starts.      |
 190 | Output     |                            | Triggered with a new          |
 191 | Event Name |                            | request_id and signature flag |
 192 |            |                            | of *Initial*                  |
 193 |            |                            |                               |
 194 |            |                            | *Abatement:* end a closed loop|
 195 |            |                            | when a condition is corrected.|
 196 |            |                            | Triggered with signature flag |
 197 |            |                            | of *Close*.                   |
 198 +------------+----------------------------+-------------------------------+
 199
 200
 201 Configure Policy
 202 ----------------
 203
 204 Use this task to configure the operational policy of the closed loop.
 205
 206 **Prerequisites:** `Design a Model`_.
 207
 208 Model configuration involves setting the values in this table,
 209 for each of the Rebuild and Migrate recipies in the model.
 210
 211 +------------+----------------------------+-------------------------------+
 212 | Field      | Values                     | Description                   |
 213 +============+============================+===============================+
 214 | Overall    | Integer                    | Maximum overall time that can |
 215 | Time Limit |                            | be spent on attempting all    |
 216 |            |                            | actions.                      |
 217 +------------+----------------------------+-------------------------------+
 218 | Receipe    | * Restart                  | The automated action to be    |
 219 |            | * Rebuild                  | triggered on the VM by the    |
 220 |            | * Migrate                  | closed loop.                  |
 221 +------------+----------------------------+-------------------------------+
 222 | Max Retries| Positive Integer           | Number of times this action   |
 223 |            |                            | should be attempted before    |
 224 |            |                            | failing on MaxRetriesExceeded.|
 225 +------------+----------------------------+-------------------------------+
 226 | Retry Time | Positive Integer           | Maximum amount of time to take|
 227 | Limit      |                            | performing retries before     |
 228 |            |                            | failing on TimeLimitExceeded. |
 229 +------------+----------------------------+-------------------------------+
 230 | Parent     | (Selection                 | Recipe that precedes this one |
 231 | Policy     |                            | in the chain of operations.   |
 232 |            |                            | If this is the first action in|
 233 |            |                            | the chain, this field is not  |
 234 |            |                            | set.                          |
 235 +------------+----------------------------+-------------------------------+
 236 | Parent     | * Failure:                 | Types of results from the     |
 237 | Policy     |   MaxRetriesExceeded       | previous action on the chain  |
 238 | Conditions | * Failure:                 | that would cause a transition |
 239 |            |   TimeLimitExceeded        | to this action.               |
 240 |            | * Failure: Exception       |                               |
 241 |            | * Failure: Other           |                               |
 242 |            | * Success                  |                               |
 243 +------------+----------------------------+-------------------------------+
 244
 245
 246 Distribute the Model
 247 --------------------
 248
 249 **Prerequisites:** `Design a Model`_.
 250
 251 In this step, the user distributes the models to the DCAE and
 252 Policy subsystems of ONAP.
 253
 254 After a model is uploaded to a VNF, the status icon of the VNF changes
 255 to from "Design" to "Activated" in the ONAP Portal GUI.
 256
 257 Open Loop Design
 258 ----------------
 259
 260 Create and distribute open control loops for managing VF faults and
 261 performance after instantiation.
 262
 263 With open loop control systems, the action(s) taken by the Policy do
 264 not affect the output of the system.
 265
 266 For information about creating policy using the Policy Designer,
 267 see :ref:`Policy Design <user-guides-service-design>`.
 268
 269
 270 .. |image0| image:: media/DesignModel.png
 271