mvn-phase-lib.sh

   1
   2 #!/bin/bash
   3 # -*- indent-tabs-mode: nil -*- # vi: set expandtab:
   4 # ================================================================================
   5 # Copyright (c) 2017-2022 AT&T Intellectual Property. All rights reserved.
   6 # ================================================================================
   7 # Licensed under the Apache License, Version 2.0 (the "License");
   8 # you may not use this file except in compliance with the License.
   9 # You may obtain a copy of the License at
  10 #
  11 #     http://www.apache.org/licenses/LICENSE-2.0
  12 #
  13 # Unless required by applicable law or agreed to in writing, software
  14 # distributed under the License is distributed on an "AS IS" BASIS,
  15 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  16 # See the License for the specific language governing permissions and
  17 # limitations under the License.
  18 # ============LICENSE_END=========================================================
  19 #MVN_PROJECT_MODULEID="$1"
  20 #MVN_PHASE="$2"
  21 #PROJECT_ROOT=$(dirname $0)
  22 FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
  23 if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
  24   MVN_PROJECT_MODULEID=""
  25 fi
  26 if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
  27   echo "=> for SNAPSHOT artifact build"
  28   MVN_DEPLOYMENT_TYPE='SNAPSHOT'
  29 else
  30   echo "=> for STAGING/RELEASE artifact build"
  31   MVN_DEPLOYMENT_TYPE='STAGING'
  32 fi
  33 echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
  34 TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
  35 # expected environment variables
  36 if [ -z "${MVN_NEXUSPROXY}" ]; then
  37     echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
  38     exit
  39 fi
  40 MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
  41 echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
  42 if [ -z "$WORKSPACE" ]; then
  43     WORKSPACE=$(pwd)
  44 fi
  45 export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
  46 #RELEASE_TAG=${MVN_RELEASE_TAG:-R11}
  47 #if [ "$RELEASE_TAG" == "R1" ]; then
  48 #  unset RELEASE_TAG
  49 #fi
  50 # mvn phase in life cycle
  51 MVN_PHASE="$2"
  52 echo "MVN_RELEASE_TAG is                 [$MVN_RELEASE_TAG]"
  53 echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
  54 echo "MVN_PHASE is                       [$MVN_PHASE]"
  55 echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
  56 echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
  57 echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
  58 echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
  59 echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
  60 echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
  61 MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
  62 echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
  63 echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
  64 echo "MVN_DOCKERREGISTRY_SNAPSHOT is     [$MVN_DOCKERREGISTRY_SNAPSHOT]"
  65 echo "MVN_DOCKERREGISTRY_PUBLIC is       [$MVN_DOCKERREGISTRY_PUBLIC]"
  66 echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
  67 echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
  68 echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
  69 clean_templated_files()
  70 {
  71   TEMPLATE_FILES=$(find . -name "*-template")
  72   for F in $TEMPLATE_FILES; do
  73     F2=$(echo "$F" | sed 's/-template$//')
  74     rm -f "$F2"
  75   done
  76 }
  77 clean_tox_files()
  78 {
  79   TOX_FILES=$(find . -name ".tox")
  80   TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
  81   for F in $TOX_FILES; do
  82     rm -rf "$F"
  83   done
  84 }
  85 expand_templates()
  86 {
  87   set +x
  88   # set up env variables, get ready for template resolution
  89   # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
  90   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
  91   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
  92   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
  93   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
  94   if [ -z "$RELEASE_TAG" ]; then
  95     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
  96     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
  97     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
  98     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
  99     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
 100     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
 101   else
 102     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
 103     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
 104     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
 105     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
 106     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
 107     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
 108   fi
 109   export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
 110   # docker registry templates are for poll, so use PUBLIC registry
 111   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="${MVN_DOCKERREGISTRY_PUBLIC}"
 112   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}"
 113   # Mvn repo
 114   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
 115   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
 116   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
 117   export ONAPTEMPLATE_STANDARD_INPUTS_TYPES="  # standard inputs list
 118   centos7image_id:
 119     type: string
 120   ubuntu1604image_id:
 121     type: string
 122   flavor_id:
 123     type: string
 124   security_group:
 125     type: string
 126   public_net:
 127     type: string
 128   private_net:
 129     type: string
 130   openstack: {}
 131   keypair:
 132     type: string
 133   key_filename:
 134     type: string
 135   location_prefix:
 136     type: string
 137   location_domain:
 138     type: string
 139   codesource_url:
 140     type: string
 141   codesource_version:
 142     type: string"
 143   TEMPLATES=$(env |grep ONAPTEMPLATE | sed 's/=.*//' | sort -u)
 144   if [ -z "$TEMPLATES" ]; then
 145     echo "No template variables found!"
 146     return 0
 147   fi
 148   TEMPLATE_FILES=$(find . -name "*-template")
 149   for F in $TEMPLATE_FILES; do
 150     F2=$(echo "$F" | sed 's/-template$//')
 151     cp -p "$F" "$F2"
 152     chmod u+w "$F2"
 153
 154     echo "====> Resolving the following template from environment variables "
 155     echo "$TEMPLATES"
 156     for KEY in $TEMPLATES; do
 157       VALUE1=$(eval 'echo "$'"$KEY"'"' | sed 1q)
 158       VALUE2=$(eval 'echo "$'"$KEY"'"' | sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
 159       echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
 160       sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F2"
 161     done
 162   done
 163   echo "====> Done template resolving"
 164 }
 165 test_templates()
 166 {
 167     # make certain that the type references exist
 168     TMP=$(mktemp)
 169     trap 'rm -f $TMP' 0 1 2 3 15
 170     echo Verify that all of the import URLs are correct
 171     find . -name '*-template' | sed -e 's/-template$//' |
 172     while read file
 173     do
 174         egrep '^  - .?https?://' < "$file"
 175     done  | awk '{print $2}' | sed -e 's/"//g' | sort -u |
 176     while read url
 177     do
 178         curl -L -w '%{http_code}' -s -o /dev/null "$url" > "$TMP"
 179         case $(< "$TMP") in
 180             2* ) ;;
 181             * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
 182         esac
 183     done
 184     echo Verify that the inputs are correct
 185     PATH=$PATH:$PWD/check-blueprint-vs-input/bin
 186     find . -name '*-template' | sed -e 's/-template$//' |
 187     while read blueprint
 188     do
 189         check-blueprint-vs-input -b "$blueprint" -i check-blueprint-vs-input/lib/sample-inputs.yaml || true
 190     done
 191 }
 192 run_tox_test()
 193 {
 194   set -e -x
 195   CURDIR=$(pwd)
 196   TOXINIS=$(find . -name "tox.ini")
 197   for TOXINI in "${TOXINIS[@]}"; do
 198     DIR=$(dirname "$TOXINI")
 199     cd "${CURDIR}/${DIR}"
 200     rm -rf ./venv-tox ./.tox
 201     python3 -m venv ./venv-tox
 202     source ./venv-tox/bin/activate
 203     pip3 install pip==9.0.3
 204     pip3 install --upgrade argparse
 205     pip3 install tox==2.9.1
 206     if [ "$RUN_BLACK" = yes ]
 207     then
 208         pip3 install black
 209         python3 -m black --line-length 120 --check .
 210     fi
 211     pip3 freeze
 212     tox
 213     deactivate
 214     rm -rf ./venv-tox ./.tox
 215   done
 216 }
 217 build_wagons()
 218 {
 219   rm -rf ./*.wgn venv-pkg
 220   SETUPFILES=$(find . -name "setup.py")
 221
 222   python3 -m venv ./venv-pkg
 223   source ./venv-pkg/bin/activate
 224   pip3 install --upgrade pip
 225   pip3 install wagon
 226   CURDIR=$(pwd)
 227   for SETUPFILE in $SETUPFILES; do
 228     PLUGIN_DIR=$(dirname "$SETUPFILE")
 229     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 230     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 231     echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
 232     wagon create -r "${PLUGIN_DIR}/requirements.txt" --format tar.gz "${PLUGIN_DIR}"
 233     PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
 234     echo Built package: "${PKG_FILE_NAMES[@]}"
 235     cd "$CURDIR"
 236   done
 237   deactivate
 238   rm -rf venv-pkg
 239 }
 240 build_archives_for_wagons()
 241 {
 242   rm -rf ./*.tgz ./*.zip venv-pkg
 243
 244   SETUPFILES=$(find "$(pwd)" -name "setup.py")
 245   CURDIR=$(pwd)
 246   for SETUPFILE in $SETUPFILES; do
 247     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
 248     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
 249     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 250     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 251     cd "${PLUGIN_FULL_DIR}"/..
 252     echo "In $(pwd), build plugin zip $PLUGIN_NAME, version $PLUGIN_VERSION"
 253     zip -r "${PLUGIN_NAME}-${PLUGIN_VERSION}.zip" "./${PLUGIN_BASE_DIR}"
 254     tar -czvf "${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz" "./${PLUGIN_BASE_DIR}"
 255     echo "Built archives for package ${PLUGIN_NAME}-${PLUGIN_VERSION} at $(pwd)"
 256     cd "$CURDIR"
 257   done
 258 }
 259 upload_raw_file()
 260 {
 261   # Extract the username and password to the nexus repo from the settings file
 262   USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
 263   PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
 264   NETRC=$(mktemp)
 265   echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
 266   REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
 267   OUTPUT_FILE=$1
 268   EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
 269   if [ "$EXT" == 'yaml' ]; then
 270     OUTPUT_FILE_TYPE='text/x-yaml'
 271   elif [ "$EXT" == 'sh' ]; then
 272     OUTPUT_FILE_TYPE='text/x-shellscript'
 273   elif [ "$EXT" == 'gz' ]; then
 274     OUTPUT_FILE_TYPE='application/gzip'
 275   elif [ "$EXT" == 'tgz' ]; then
 276     OUTPUT_FILE_TYPE='application/gzip'
 277   elif [ "$EXT" == 'zip' ]; then
 278     OUTPUT_FILE_TYPE='application/zip'
 279   elif [ "$EXT" == 'wgn' ]; then
 280     OUTPUT_FILE_TYPE='application/gzip'
 281   else
 282     OUTPUT_FILE_TYPE='application/octet-stream'
 283   fi
 284   # for multi module projects, the raw repo path must match with project name, not project + module
 285   # FQDN is project + module
 286   # GROUPID is project name
 287   if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
 288     PROJECT_NAME=${MVN_PROJECT_GROUPID}
 289   else
 290     PROJECT_NAME=${FQDN}
 291   fi
 292   if [ -z "$RELEASE_TAG" ]; then
 293     SEND_TO="${REPO}/${PROJECT_NAME}"
 294   else
 295     SEND_TO="${REPO}/${PROJECT_NAME}/${RELEASE_TAG}"
 296   fi
 297
 298   if [ ! -z "$2" ]; then
 299     SEND_TO="$SEND_TO/$2"
 300   fi
 301   echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
 302   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
 303   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
 304 }
 305 upload_wagon_archives()
 306 {
 307   SETUPFILES=$(find "$(pwd)" -name "setup.py")
 308   CURDIR=$(pwd)
 309   for SETUPFILE in $SETUPFILES; do
 310     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
 311     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
 312     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 313     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 314     cd "${PLUGIN_FULL_DIR}"/..
 315     echo "In $(pwd), upload zip archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
 316     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.zip"
 317     if [ -z "$ARCHIVE_FILE_NAME" ]; then
 318       echo "!!! No zip archive file found ${ARCHIVE_FILE_NAME}"
 319       exit -1
 320     fi
 321     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 322     echo "In $(pwd), upload tgz archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
 323     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz"
 324     if [ -z "$ARCHIVE_FILE_NAME" ]; then
 325       echo "!!! No tgz archive file found ${ARCHIVE_FILE_NAME}"
 326       exit -1
 327     fi
 328     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 329     cd "${CURDIR}"
 330   done
 331 }
 332 upload_wagons_and_type_yamls()
 333 {
 334   SETUPFILES=$(find . -name "setup.py")
 335   CURDIR=$(pwd)
 336   for SETUPFILE in $SETUPFILES; do
 337     PLUGIN_DIR=$(dirname "$SETUPFILE")
 338     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 339     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 340     PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
 341     PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
 342     echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
 343     TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
 344     if [ -z "$TYPEFILE_NAME" ]; then
 345       echo "!!! No typefile found with matching package name $PLUGIN_NAME"
 346       exit -1
 347     fi
 348     NEWFILENAME="${PLUGIN_NAME}"_types.yaml
 349     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
 350       echo "copy typefile to standard naming"
 351       cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
 352     fi
 353     TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' "$TYPEFILE_NAME" |cut -f2 -d ':' |sed -r 's/\s+//g')
 354     WAGONFILE_NAME=$(ls -1 "${PLUGIN_NAME}"-"${TYPEFILE_PACKAGE_VERSION}"-*.wgn)
 355     if [ -z "$WAGONFILE_NAME" ]; then
 356       echo "!!! No wagonfile found with matching package name and version as required in typefile: "
 357       echo "    $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
 358       exit -1
 359     fi
 360     upload_raw_file "${NEWFILENAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 361     upload_raw_file "${WAGONFILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 362
 363     rm -r "$WAGONFILE_NAME"
 364     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
 365       rm -f "$NEWFILENAME"
 366     fi
 367   done
 368 }
 369 upload_files_of_extension()
 370 {
 371   FILES=$(ls -1 ./*."$1")
 372   for F in $FILES ; do
 373     upload_raw_file "$F" "$2"
 374   done
 375 }
 376 upload_files_of_extension_recursively()
 377 {
 378   FILES=$(find . -name "*.$1")
 379   for F in $FILES ; do
 380     upload_raw_file "$F" "$2"
 381   done
 382 }
 383 generate_pypirc_then_publish()
 384 {
 385   set +x
 386   USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
 387   PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
 388   if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
 389     MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
 390   fi
 391
 392   cat > ~/.pypirc <<EOL
 393 [distutils]
 394 index-servers =
 395   $MVN_PYPISERVER_SERVERID
 396
 397 [$MVN_PYPISERVER_SERVERID]
 398 repository: $MVN_PYPISERVER_BASEURL
 399 username: $USER
 400 password: $PASS
 401 EOL
 402   # this may fail if a package of same version exists
 403   python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
 404   set -x
 405 }
 406 # following the https://wiki.onap.org/display/DW/Independent+Versioning+and+Release+Process
 407 #IndependentVersioningandReleaseProcess-StandardizedDockerTagging
 408 build_and_push_docker()
 409 {
 410   # Old tagging
 411   #IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
 412   # new tagging
 413   ENDID=$(echo $FQDN | rev | cut -f1 -d '.' |rev)
 414   if [ "$ENDID" == "${MVN_PROJECT_MODULEID}" ]; then
 415     #IMAGENAME="onap/${FQDN/org.onap./}"
 416     IMAGENAME="onap/${FQDN}"
 417   else
 418     #IMAGENAME="onap/${FQDN/org.onap./}.${MVN_PROJECT_MODULEID}"
 419     IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
 420   fi
 421   IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
 422   IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
 423   # use the major and minor version of the MVN artifact version as docker image version
 424   VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
 425   VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
 426   LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
 427   # build a docker image
 428   docker build --rm -f ./Dockerfile -t "${LFQI}" ./
 429   # all local builds push to SNAPSHOT repo
 430   REPO=""
 431   if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
 432      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 433   elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
 434      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 435   else
 436      echo "Fail to determine DEPLOYMENT_TYPE"
 437      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 438   fi
 439   echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
 440   if [ ! -z "$REPO" ]; then
 441     USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
 442     PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
 443     if [ -z "$USER" ]; then
 444       echo "Error: no user provided"
 445     fi
 446     if [ -z "$PASS" ]; then
 447       echo "Error: no password provided"
 448     fi
 449     [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
 450     echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
 451     set +x
 452     docker login "$REPO" -u "$USER" -p "$PASS"
 453     set -x
 454     # local tag is imagename:version-timestamp
 455     OLDTAG="${LFQI}"
 456     # three tags are pushed:
 457     #   {imagename}:{semver}-SNAPSHOT-{timestamp}Z       this is what CIMAN-132 asks
 458     #   {imagename}:{semver}                             latest of current version, for testing
 459     #   {imagename}:latest                               latest of all, used mainly by csit
 460     # LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
 461     # Updating tags for ${REPO}/${IMAGENAME}:${VERSION} to include STAGING-latest; and adding new tag for major:minor-STAGING-latest
 462     PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION}-SNAPSHOT-${TIMESTAMP}Z ${REPO}/${IMAGENAME}:${VERSION2}-STAGING-latest ${REPO}/${IMAGENAME}:${VERSION}-STAGING-latest ${REPO}/${IMAGENAME}:latest"
 463     for NEWTAG in ${PUSHTAGS}
 464     do
 465       echo "tagging ${OLDTAG} to ${NEWTAG}"
 466       docker tag "${OLDTAG}" "${NEWTAG}"
 467       echo "pushing ${NEWTAG}"
 468       docker push "${NEWTAG}"
 469       OLDTAG="${NEWTAG}"
 470     done
 471   fi
 472 }
 473