auth/sample/bin/service.sh

   1 #!/bin/bash
   2 #########
   3 #  ============LICENSE_START====================================================
   4 #  org.onap.aaf
   5 #  ===========================================================================
   6 #  Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
   7 #  ===========================================================================
   8 #  Licensed under the Apache License, Version 2.0 (the "License");
   9 #  you may not use this file except in compliance with the License.
  10 #  You may obtain a copy of the License at
  11 #
  12 #       http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 #  Unless required by applicable law or agreed to in writing, software
  15 #  distributed under the License is distributed on an "AS IS" BASIS,
  16 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  17 #  See the License for the specific language governing permissions and
  18 #  limitations under the License.
  19 #  ============LICENSE_END====================================================
  20 #
  21 # This script is run when starting aaf_config Container.
  22 #  It needs to cover the cases where the initial data doesn't exist, and when it has already been configured (don't overwrite)
  23 #
  24
  25 echo "# Properties passed in"
  26     for P in `env`; do
  27       if [[ "$P" == cadi* ]] || [[ "$P" == aaf* ]] || [[ "$P" == HOSTNAME* ]]; then
  28         S="${P/_helm/.helm}"
  29         S="${S/_oom/.oom}"
  30         echo "$S"
  31       fi
  32     done
  33
  34 # Set from CAP Based PROPS, if necessary
  35 aaf_env=${aaf_env:-"${AAF_ENV}"}
  36 aaf_release=${aaf_release:-"${VERSION}"}
  37 cadi_latitude=${cadi_latitude:-"${LATITUDE}"}
  38 cadi_longitude=${cadi_longitude:-"${LONGITUDE}"}
  39 cadi_x509_issuers=${cadi_x509_issuers:-"${CADI_X509_ISSUERS}"}
  40 aaf_locate_url=${aaf_locate_url:-"https://${HOSTNAME}:8095"}
  41
  42 JAVA=/usr/bin/java
  43
  44 OSAAF=/opt/app/osaaf
  45 LOCAL=$OSAAF/local
  46 DATA=$OSAAF/data
  47 PUBLIC=$OSAAF/public
  48 CONFIG=/opt/app/aaf_config
  49
  50 JAVA_CADI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar org.onap.aaf.cadi.CmdLine"
  51 JAVA_AGENT="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.cadi.configure.Agent"
  52 JAVA_AAFCLI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.auth.cmd.AAFcli"
  53 JAVA_AAFBATCH="$JAVA -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.batch.props -jar $CONFIG/bin/aaf-auth-batch-*-full.jar"
  54
  55 # If doesn't exist... still create
  56 mkdir -p $OSAAF
  57
  58 # If not created by separate PV, create
  59 mkdir -p /opt/app/aaf/status
  60
  61 # Temp use for clarity of code
  62 FILE=
  63
  64 # Setup Bash, first time only
  65 if [ ! -e "$HOME/.bashrc" ] || [ -z "$(grep cadi $HOME/.bashrc)" ]; then
  66   echo "alias cadi='$JAVA_CADI \$*'" >>$HOME/.bashrc
  67   echo "alias agent='$CONFIG/bin/agent.sh \$*'" >>$HOME/.bashrc
  68   echo "alias aafcli='$JAVA_AAFCLI \$*'" >>$HOME/.bashrc
  69   echo "alias batch='$JAVA_AAFBATCH \$*'" >>$HOME/.bashrc
  70   chmod a+x $CONFIG/bin/agent.sh
  71   . $HOME/.bashrc
  72 fi
  73
  74 # Only load Identities once
  75 # echo "Check Identities"
  76 FILE="$DATA/identities.dat"
  77 if [ ! -e $FILE ]; then
  78     mkdir -p $DATA
  79     cp $CONFIG/data/sample.identities.dat $FILE
  80     echo "Set Identities"
  81     INITIALIZED="true"
  82 fi
  83
  84 # Load up Cert/X509 Artifacts
  85 # echo "Check Signer Keyfile"
  86 FILE="$LOCAL/org.osaaf.aaf.signer.p12"
  87 if [ ! -e $FILE ]; then
  88     mkdir -p $LOCAL
  89     mkdir -p $PUBLIC
  90     if [ -e $CONFIG/cert/org.osaaf.aaf.signer.p12 ]; then
  91         cp $CONFIG/cert/org.osaaf.aaf.signer.p12 $FILE
  92         echo "Installed Signer P12"
  93         INITIALIZED="true"
  94     else
  95         echo "Decode"
  96         base64 -d $CONFIG/cert/demoONAPsigner.p12.b64 > $FILE
  97         base64 -d $CONFIG/cert/truststoreONAP.p12.b64 > $PUBLIC/truststoreONAP.p12
  98         base64 -d $CONFIG/cert/truststoreONAPall.jks.b64 > $PUBLIC/truststoreONAPall.jks
  99         ln -s $PUBLIC/truststoreONAPall.jks $LOCAL
 100         cp $CONFIG/cert/AAF_RootCA.cer $PUBLIC
 101         CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
 102         echo "cadi_keystore_password=something easy" >> $CONFIG/local/aaf.props
 103         echo "Setup ONAP Test CAs and Signers"
 104         INITIALIZED="true"
 105     fi
 106 fi
 107
 108 # Should we clean up?
 109 if [ "${VERSION}" != "$(cat ${LOCAL}/VERSION)" ]; then
 110   echo "Clean up directory ${LOCAL}"
 111   rm -Rf ${LOCAL}/*
 112 fi
 113 echo "${VERSION}" > $LOCAL/VERSION
 114
 115 FILE="$LOCAL/org.osaaf.aaf.p12"
 116 if [ ! -e $FILE ]; then
 117     if [ -e $CONFIG/cert/org.osaaf.aaf.p12 ]; then
 118         cp $CONFIG/cert/org.osaaf.aaf.p12 $FILE
 119         echo "Installed AAF P12"
 120         INITIALIZED="true"
 121     else
 122         echo "Bootstrap Creation of Keystore from Signer"
 123         cd $CONFIG/CA
 124
 125         # Remove this after Casablanca
 126         CADI_X509_ISSUERS="CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US"
 127         bash bootstrap.sh $LOCAL/org.osaaf.aaf.signer.p12 'something easy'
 128         cp aaf.bootstrap.p12 $FILE
 129         if [ -n "$CADI_X509_ISSUERS" ]; then
 130             CADI_X509_ISSUERS="$CADI_X509_ISSUERS:"
 131         fi
 132         BOOT_ISSUER="$(cat aaf.bootstrap.issuer)"
 133         CADI_X509_ISSUERS="$CADI_X509_ISSUERS$BOOT_ISSUER"
 134
 135         I=${BOOT_ISSUER##CN=};I=${I%%,*}
 136         CM_CA_PASS="something easy"
 137         CM_CA_LOCAL="org.onap.aaf.auth.cm.ca.LocalCA,$LOCAL/org.osaaf.aaf.signer.p12;aaf_intermediate_9;enc:"
 138         CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
 139         echo "Generated ONAP Test AAF certs"
 140         INITIALIZED="true"
 141     fi
 142 fi
 143
 144 # Only initialize once, automatically...
 145 if [ ! -e $LOCAL/org.osaaf.aaf.props ]; then
 146     cp  $CONFIG/local/org.osaaf.aaf* $LOCAL
 147     for D in public etc logs; do
 148         mkdir -p $OSAAF/$D
 149         cp $CONFIG/$D/* $OSAAF/$D
 150     done
 151
 152     TMP=$(mktemp)
 153     for P in `env`; do
 154       if [[ "$P" == aaf_* ]] || [[ "$P" == cadi_* ]]; then
 155         S="${P/_helm/.helm}"
 156         S="${S/_oom/.oom}"
 157         echo "$S" >> ${TMP}
 158       fi
 159     done
 160
 161     cat $TMP
 162
 163     $JAVA_AGENT config \
 164         aaf@aaf.osaaf.org \
 165         cadi_etc_dir=$LOCAL \
 166         cadi_latitude=${cadi_latitude} \
 167         cadi_longitude=${cadi_longitude} \
 168         cadi_prop_files=$CONFIG/local/initialConfig.props:$CONFIG/local/aaf.props:${TMP}
 169     rm ${TMP}
 170
 171     # Cassandra Config stuff
 172     # Default is expect a Cassandra on same Node
 173     CASS_HOST=${CASS_HOST:="aaf-cass"}
 174     CASS_PASS=$($JAVA_CADI digest "${CASSANDRA_PASSWORD:-cassandra}" $LOCAL/org.osaaf.aaf.keyfile)
 175     CASS_NAME=${CASS_HOST/:*/}
 176     sed -i.backup -e "s/\\(cassandra.clusters=\\).*/\\1${CASSANDRA_CLUSTER:=$CASS_HOST}/" \
 177                   -e "s/\\(cassandra.clusters.user=\\).*/\\1${CASSANDRA_USER:=cassandra}/" \
 178                   -e "s/\\(cassandra.clusters.password=enc:\\).*/\\1$CASS_PASS/" \
 179                   -e "s/\\(cassandra.clusters.port=\\).*/\\1${CASSANDRA_PORT:=9042}/" \
 180                   $LOCAL/org.osaaf.aaf.cassandra.props
 181
 182     if [ -n "$CM_CA_LOCAL" ]; then
 183       if [ -n "$CM_CA_PASS" ]; then
 184           CM_CA_LOCAL=$CM_CA_LOCAL$($JAVA_CADI digest "$CM_CA_PASS" $LOCAL/org.osaaf.aaf.keyfile)
 185       fi
 186       # Move and copy method, rather than sed, because of slashes in CM_CA_LOCAL makes too complex
 187       FILE=$LOCAL/org.osaaf.aaf.cm.ca.props
 188       mv $FILE $FILE.backup
 189       grep -v "cm_ca.local=" $FILE.backup > $FILE
 190       echo "cm_ca.local=$CM_CA_LOCAL" >> $FILE
 191       echo "cm_trust_cas=$CM_TRUST_CAS" >> $FILE
 192     fi
 193     echo "Created AAF Initial Configurations"
 194     INITIALIZED="true"
 195 fi
 196
 197
 198 # Now run a command
 199 CMD=$1
 200 if [ -z "$CMD"  ]; then
 201     if [ -n "$INITIALIZED" ]; then
 202         echo "Initialization Complete"
 203     else
 204         echo "No Additional Initialization required"
 205     fi
 206 else
 207     shift
 208     case "$CMD" in
 209     ls)
 210         echo ls requested
 211         find $OSAAF -depth
 212         ;;
 213     cat)
 214         if [ "$1" = "" ]; then
 215             echo "usage: cat <file... ONLY files ending in .props>"
 216         else
 217             if [[ $1 == *.props ]]; then
 218                 echo
 219                 echo "## CONTENTS OF $3"
 220                 echo
 221                 cat "$1"
 222             else
 223                 echo "### ERROR ####"
 224                 echo "   \"cat\" may only be used with files ending with \".props\""
 225             fi
 226         fi
 227         ;;
 228     validate)
 229         echo "## validate requested"
 230         $JAVA_AAFCLI perm list user aaf@aaf.osaaf.org
 231         ;;
 232     onap)
 233         #echo Initializing ONAP configurations.
 234         ;;
 235     bash)
 236         shift
 237         cd $LOCAL || exit
 238         exec /bin/bash -c "$@"
 239         ;;
 240     setProp)
 241         cd $LOCAL || exit
 242         FILES=$(grep -l "$1" ./*.props)
 243         if [ -z "$FILES" ]; then
 244             if [ -z "$3" ]; then
 245                FILES=org.osaaf.aaf.props
 246             else
 247                FILES="$3"
 248             fi
 249             ADD=Y
 250         fi
 251         for F in $FILES; do
 252             if [ "$ADD" = "Y" ]; then
 253                 echo "Changing $1 for $F"
 254                 echo "$1=$2" >> $F
 255             else
 256                echo "Changing $1 in $F"
 257                sed -i.backup -e "s/\\(${1}=\\).*/\\1${2}/" $F
 258             fi
 259             cat $F
 260         done
 261         ;;
 262     encrypt)
 263         cd $LOCAL || exit
 264         echo $1
 265         FILES=$(grep -l "$1" ./*.props)
 266         if [ "$FILES" = "" ]; then
 267              FILES=$LOCAL/org.osaaf.aaf.cred.props
 268              ADD=Y
 269         fi
 270         for F in $FILES; do
 271             echo "Changing $1 in $F"
 272             if [ "$2" = "" ]; then
 273                 read -r -p "Password (leave blank to cancel): " -s ORIG_PW
 274                 echo " "
 275                 if [ "$ORIG_PW" = "" ]; then
 276                     echo canceling...
 277                     break
 278                 fi
 279             else
 280                 ORIG_PW="$2"
 281             fi
 282             PWD=$($JAVA_CADI digest "$ORIG_PW" $LOCAL/org.osaaf.aaf.keyfile)
 283             if [ "$ADD" = "Y" ]; then
 284                   echo "$1=enc:$PWD" >> $F
 285             else
 286                 sed -i.backup -e "s/\\($1.*enc:\\).*/\\1$PWD/" $F
 287            fi
 288             cat $F
 289         done
 290         ;;
 291     taillog)
 292         sh $OSAAF/logs/taillog
 293         ;;
 294     wait)
 295         bash $CONFIG/bin/pod_wait.sh wait $1
 296         ;;
 297     --help | -?)
 298         case "$1" in
 299         "")
 300             echo "--- Agent Container Comands ---"
 301             echo "  ls                      - Lists all files in Configuration"
 302             echo "  cat <file.props>>       - Shows the contents (Prop files only)"
 303             echo "  validate                - Runs a test using Configuration"
 304             echo "  setProp <tag> [<value>] - set value on 'tag' (if no value, it will be queried from config)"
 305             echo "  encrypt <tag> [<pass>]  - set passwords on Configuration (if no pass, it will be queried)"
 306             echo "  bash                    - run bash in Container"
 307             echo "     Note: the following aliases are preset"
 308             echo "       cadi               - CADI CmdLine tool"
 309             echo "       agent              - Agent Java tool (see above help)"
 310             echo ""
 311             echo " --help|-? [cadi|agent]   - This help, cadi help or agent help"
 312             ;;
 313         cadi)
 314             echo "--- cadi Tool Comands ---"
 315             $JAVA_CADI
 316             ;;
 317         agent)
 318             echo "--- agent Tool Comands ---"
 319             $JAVA_AGENT
 320             ;;
 321         aafcli)
 322             echo "--- aafcli Tool Comands ---"
 323             $JAVA_AAFCLI
 324             ;;
 325         esac
 326         echo ""
 327         ;;
 328     *)
 329         $JAVA_AGENT "$CMD" "$@" cadi_prop_files=$LOCAL/org.osaaf.aaf.props
 330         ;;
 331     esac
 332 fi