auth/sample/bin/service.sh

   1 #!/bin/bash
   2 #########
   3 #  ============LICENSE_START====================================================
   4 #  org.onap.aaf
   5 #  ===========================================================================
   6 #  Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
   7 #  ===========================================================================
   8 #  Licensed under the Apache License, Version 2.0 (the "License");
   9 #  you may not use this file except in compliance with the License.
  10 #  You may obtain a copy of the License at
  11 #
  12 #       http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 #  Unless required by applicable law or agreed to in writing, software
  15 #  distributed under the License is distributed on an "AS IS" BASIS,
  16 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  17 #  See the License for the specific language governing permissions and
  18 #  limitations under the License.
  19 #  ============LICENSE_END====================================================
  20 #
  21 # This script is run when starting aaf_config Container.
  22 #  It needs to cover the cases where the initial data doesn't exist, and when it has already been configured (don't overwrite)
  23 #
  24
  25 echo "# Properties passed in"
  26     for P in `env`; do
  27       if [[ "$P" == cadi* ]] || [[ "$P" == aaf* ]] || [[ "$P" == HOSTNAME* ]]; then
  28         S="${P/_helm/.helm}"
  29         S="${S/_oom/.oom}"
  30         echo "$S"
  31       fi
  32     done
  33
  34 # Set from CAP Based PROPS, if necessary
  35 aaf_env=${aaf_env:-"${AAF_ENV}"}
  36 aaf_release=${aaf_release:-"${VERSION}"}
  37 cadi_latitude=${cadi_latitude:-"${LATITUDE}"}
  38 cadi_longitude=${cadi_longitude:-"${LONGITUDE}"}
  39 cadi_x509_issuers=${cadi_x509_issuers:-"${CADI_X509_ISSUERS}"}
  40 aaf_locate_url=${aaf_locate_url:-"https://${HOSTNAME}:8095"}
  41
  42 JAVA=/usr/bin/java
  43
  44 OSAAF=/opt/app/osaaf
  45 LOCAL=$OSAAF/local
  46 DATA=$OSAAF/data
  47 PUBLIC=$OSAAF/public
  48 CONFIG=/opt/app/aaf_config
  49
  50 JAVA_CADI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar org.onap.aaf.cadi.CmdLine"
  51 JAVA_AGENT="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.cadi.configure.Agent"
  52 JAVA_AAFCLI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.auth.cmd.AAFcli"
  53 JAVA_AAFBATCH="$JAVA -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.batch.props -jar $CONFIG/bin/aaf-auth-batch-*-full.jar"
  54
  55 # If doesn't exist... still create
  56 mkdir -p $OSAAF
  57
  58 # If not created by separate PV, create
  59 mkdir -p /opt/app/aaf/status
  60
  61 # Temp use for clarity of code
  62 FILE=
  63
  64 # Setup Bash, first time only
  65 if [ ! -e "$HOME/.bashrc" ] || [ -z "$(grep cadi $HOME/.bashrc)" ]; then
  66   echo "alias cadi='$JAVA_CADI \$*'" >>$HOME/.bashrc
  67   echo "alias agent='$CONFIG/bin/agent.sh \$*'" >>$HOME/.bashrc
  68   echo "alias aafcli='$JAVA_AAFCLI \$*'" >>$HOME/.bashrc
  69   echo "alias batch='$JAVA_AAFBATCH \$*'" >>$HOME/.bashrc
  70   chmod a+x $CONFIG/bin/agent.sh
  71   . $HOME/.bashrc
  72 fi
  73
  74 # Only load Identities once
  75 # echo "Check Identities"
  76 FILE="$DATA/identities.dat"
  77 if [ ! -e $FILE ]; then
  78     mkdir -p $DATA
  79     cp $CONFIG/data/sample.identities.dat $FILE
  80     echo "Set Identities"
  81     INITIALIZED="true"
  82 fi
  83
  84 # Load up Cert/X509 Artifacts
  85 # echo "Check Signer Keyfile"
  86 FILE="$LOCAL/org.osaaf.aaf.signer.p12"
  87 if [ ! -e $FILE ]; then
  88     mkdir -p $LOCAL
  89     mkdir -p $PUBLIC
  90     if [ -e $CONFIG/cert/org.osaaf.aaf.signer.p12 ]; then
  91         cp $CONFIG/cert/org.osaaf.aaf.signer.p12 $FILE
  92         echo "Installed Signer P12"
  93         INITIALIZED="true"
  94     else
  95         echo "Decode"
  96         base64 -d $CONFIG/cert/demoONAPsigner.p12.b64 > $FILE
  97         base64 -d $CONFIG/cert/truststoreONAP.p12.b64 > $PUBLIC/truststoreONAP.p12
  98         base64 -d $CONFIG/cert/truststoreONAPall.jks.b64 > $PUBLIC/truststoreONAPall.jks
  99         ln -s $PUBLIC/truststoreONAPall.jks $LOCAL
 100         cp $CONFIG/cert/AAF_RootCA.cer $PUBLIC
 101         CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
 102         echo "cadi_keystore_password=something easy" >> $CONFIG/local/aaf.props
 103         echo "Setup ONAP Test CAs and Signers"
 104         INITIALIZED="true"
 105     fi
 106 fi
 107
 108 # echo "Check keyfile"
 109 FILE="$LOCAL/org.osaaf.aaf.p12"
 110 if [ ! -e $FILE ]; then
 111     if [ -e $CONFIG/cert/org.osaaf.aaf.p12 ]; then
 112         cp $CONFIG/cert/org.osaaf.aaf.p12 $FILE
 113         echo "Installed AAF P12"
 114         INITIALIZED="true"
 115     else
 116         echo "Bootstrap Creation of Keystore from Signer"
 117         cd $CONFIG/CA
 118
 119         # Remove this after Casablanca
 120         CADI_X509_ISSUERS="CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US"
 121         bash bootstrap.sh $LOCAL/org.osaaf.aaf.signer.p12 'something easy'
 122         cp aaf.bootstrap.p12 $FILE
 123         if [ -n "$CADI_X509_ISSUERS" ]; then
 124             CADI_X509_ISSUERS="$CADI_X509_ISSUERS:"
 125         fi
 126         BOOT_ISSUER="$(cat aaf.bootstrap.issuer)"
 127         CADI_X509_ISSUERS="$CADI_X509_ISSUERS$BOOT_ISSUER"
 128
 129         I=${BOOT_ISSUER##CN=};I=${I%%,*}
 130         CM_CA_PASS="something easy"
 131         CM_CA_LOCAL="org.onap.aaf.auth.cm.ca.LocalCA,$LOCAL/org.osaaf.aaf.signer.p12;aaf_intermediate_9;enc:"
 132         CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
 133         echo "Generated ONAP Test AAF certs"
 134         INITIALIZED="true"
 135     fi
 136 fi
 137
 138 # Only initialize once, automatically...
 139 if [ ! -e $LOCAL/org.osaaf.aaf.props ]; then
 140     cp  $CONFIG/local/org.osaaf.aaf* $LOCAL
 141     for D in public etc logs; do
 142         mkdir -p $OSAAF/$D
 143         cp $CONFIG/$D/* $OSAAF/$D
 144     done
 145
 146     TMP=$(mktemp)
 147     for P in `env`; do
 148       if [[ "$P" == aaf_* ]] || [[ "$P" == cadi_* ]]; then
 149         S="${P/_helm/.helm}"
 150         S="${S/_oom/.oom}"
 151         echo "$S" >> ${TMP}
 152       fi
 153     done
 154
 155     cat $TMP
 156
 157     $JAVA_AGENT config \
 158         aaf@aaf.osaaf.org \
 159         cadi_etc_dir=$LOCAL \
 160         cadi_prop_files=$CONFIG/local/initialConfig.props:$CONFIG/local/aaf.props:${TMP}
 161     rm ${TMP}
 162
 163     # Cassandra Config stuff
 164     # Default is expect a Cassandra on same Node
 165     CASS_HOST=${CASS_HOST:="aaf-cass"}
 166     CASS_PASS=$($JAVA_CADI digest "${CASSANDRA_PASSWORD:-cassandra}" $LOCAL/org.osaaf.aaf.keyfile)
 167     CASS_NAME=${CASS_HOST/:*/}
 168     sed -i.backup -e "s/\\(cassandra.clusters=\\).*/\\1${CASSANDRA_CLUSTER:=$CASS_HOST}/" \
 169                   -e "s/\\(cassandra.clusters.user=\\).*/\\1${CASSANDRA_USER:=cassandra}/" \
 170                   -e "s/\\(cassandra.clusters.password=enc:\\).*/\\1$CASS_PASS/" \
 171                   -e "s/\\(cassandra.clusters.port=\\).*/\\1${CASSANDRA_PORT:=9042}/" \
 172                   $LOCAL/org.osaaf.aaf.cassandra.props
 173
 174     if [ -n "$CM_CA_LOCAL" ]; then
 175       if [ -n "$CM_CA_PASS" ]; then
 176           CM_CA_LOCAL=$CM_CA_LOCAL$($JAVA_CADI digest "$CM_CA_PASS" $LOCAL/org.osaaf.aaf.keyfile)
 177       fi
 178       # Move and copy method, rather than sed, because of slashes in CM_CA_LOCAL makes too complex
 179       FILE=$LOCAL/org.osaaf.aaf.cm.ca.props
 180       mv $FILE $FILE.backup
 181       grep -v "cm_ca.local=" $FILE.backup > $FILE
 182       echo "cm_ca.local=$CM_CA_LOCAL" >> $FILE
 183       echo "cm_trust_cas=$CM_TRUST_CAS" >> $FILE
 184     fi
 185     echo "Created AAF Initial Configurations"
 186     INITIALIZED="true"
 187 fi
 188
 189
 190 # Now run a command
 191 CMD=$1
 192 if [ -z "$CMD"  ]; then
 193     if [ -n "$INITIALIZED" ]; then
 194         echo "Initialization Complete"
 195     else
 196         echo "No Additional Initialization required"
 197     fi
 198 else
 199     shift
 200     case "$CMD" in
 201     ls)
 202         echo ls requested
 203         find $OSAAF -depth
 204         ;;
 205     cat)
 206         if [ "$1" = "" ]; then
 207             echo "usage: cat <file... ONLY files ending in .props>"
 208         else
 209             if [[ $1 == *.props ]]; then
 210                 echo
 211                 echo "## CONTENTS OF $3"
 212                 echo
 213                 cat "$1"
 214             else
 215                 echo "### ERROR ####"
 216                 echo "   \"cat\" may only be used with files ending with \".props\""
 217             fi
 218         fi
 219         ;;
 220     validate)
 221         echo "## validate requested"
 222         $JAVA_AAFCLI perm list user aaf@aaf.osaaf.org
 223         ;;
 224     onap)
 225         #echo Initializing ONAP configurations.
 226         ;;
 227     bash)
 228         shift
 229         cd $LOCAL || exit
 230         exec /bin/bash -c "$@"
 231         ;;
 232     setProp)
 233         cd $LOCAL || exit
 234         FILES=$(grep -l "$1" ./*.props)
 235         if [ -z "$FILES" ]; then
 236             if [ -z "$3" ]; then
 237                FILES=org.osaaf.aaf.props
 238             else
 239                FILES="$3"
 240             fi
 241             ADD=Y
 242         fi
 243         for F in $FILES; do
 244             if [ "$ADD" = "Y" ]; then
 245                 echo "Changing $1 for $F"
 246                 echo "$1=$2" >> $F
 247             else
 248                echo "Changing $1 in $F"
 249                sed -i.backup -e "s/\\(${1}=\\).*/\\1${2}/" $F
 250             fi
 251             cat $F
 252         done
 253         ;;
 254     encrypt)
 255         cd $LOCAL || exit
 256         echo $1
 257         FILES=$(grep -l "$1" ./*.props)
 258         if [ "$FILES" = "" ]; then
 259              FILES=$LOCAL/org.osaaf.aaf.cred.props
 260              ADD=Y
 261         fi
 262         for F in $FILES; do
 263             echo "Changing $1 in $F"
 264             if [ "$2" = "" ]; then
 265                 read -r -p "Password (leave blank to cancel): " -s ORIG_PW
 266                 echo " "
 267                 if [ "$ORIG_PW" = "" ]; then
 268                     echo canceling...
 269                     break
 270                 fi
 271             else
 272                 ORIG_PW="$2"
 273             fi
 274             PWD=$($JAVA_CADI digest "$ORIG_PW" $LOCAL/org.osaaf.aaf.keyfile)
 275             if [ "$ADD" = "Y" ]; then
 276                   echo "$1=enc:$PWD" >> $F
 277             else
 278                 sed -i.backup -e "s/\\($1.*enc:\\).*/\\1$PWD/" $F
 279            fi
 280             cat $F
 281         done
 282         ;;
 283     taillog)
 284         sh $OSAAF/logs/taillog
 285         ;;
 286     wait)
 287         bash $CONFIG/bin/pod_wait.sh wait $1
 288         ;;
 289     --help | -?)
 290         case "$1" in
 291         "")
 292             echo "--- Agent Container Comands ---"
 293             echo "  ls                      - Lists all files in Configuration"
 294             echo "  cat <file.props>>       - Shows the contents (Prop files only)"
 295             echo "  validate                - Runs a test using Configuration"
 296             echo "  setProp <tag> [<value>] - set value on 'tag' (if no value, it will be queried from config)"
 297             echo "  encrypt <tag> [<pass>]  - set passwords on Configuration (if no pass, it will be queried)"
 298             echo "  bash                    - run bash in Container"
 299             echo "     Note: the following aliases are preset"
 300             echo "       cadi               - CADI CmdLine tool"
 301             echo "       agent              - Agent Java tool (see above help)"
 302             echo ""
 303             echo " --help|-? [cadi|agent]   - This help, cadi help or agent help"
 304             ;;
 305         cadi)
 306             echo "--- cadi Tool Comands ---"
 307             $JAVA_CADI
 308             ;;
 309         agent)
 310             echo "--- agent Tool Comands ---"
 311             $JAVA_AGENT
 312             ;;
 313         aafcli)
 314             echo "--- aafcli Tool Comands ---"
 315             $JAVA_AAFCLI
 316             ;;
 317         esac
 318         echo ""
 319         ;;
 320     *)
 321         $JAVA_AGENT "$CMD" "$@" cadi_prop_files=$LOCAL/org.osaaf.aaf.props
 322         ;;
 323     esac
 324 fi