-<service-logic xmlns='http://www.onap.org/sdnc/svclogic' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='SUBNET-API' version='${project.version}'><method rpc='subnet-allocated-notification' mode='sync'>\r
-<block><record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
-<parameter name="logger" value="message-log"/>\r
-<parameter name="field1" value="__TIMESTAMP__"/>\r
-<parameter name="field2" value="subnet-allocated-notification"/>\r
-<parameter name="field3" value="`$eipam-ip-block.request-id`"/>\r
-<parameter name="field4" value="`$eipam-ip-block.entity-id`"/>\r
-<parameter name="field5" value="`$eipam-ip-block.ptnii-name`"/>\r
-<parameter name="field6" value="`$eipam-ip-block.ip-address`"/>\r
-<parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>\r
-<parameter name="field8" value="`$eipam-ip-block.status`"/>\r
-<parameter name="field9" value="`$tmp.key-value`"/></record><!--Need to know which ipv version to get the plan name from the network-model.--><switch test="`$eipam-ip-block.ptnii-name`"><!--If there's ptnii-name, then it's Gamma service--><outcome value='Other'><configure adaptor="com.att.sdnctl.sli.adaptor.ncs.ncsAdaptor" key="SNIIR" activate="true">\r
- <parameter name="input.request-id" value="`$eipam-ip-block.request-id`" />\r
- <parameter name="input.source" value="SDNC" />\r
- <parameter name="input.ptnii-name" value="`$eipam-ip-block.ptnii-name`" />\r
- <parameter name="input.ip-address" value="`$eipam-ip-block.ip-address`" />\r
- <parameter name="input.mask" value="`$eipam-ip-block.prefix-length`" /><outcome value="success">\r
-<block><save \r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' \r
- resource='SQL'\r
- key="UPDATE EIPAM_IP_SUBNETS\r
- SET status = 'PENDING-ACTIVE'\r
- WHERE entity_id = $eipam-ip-block.entity-id ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-row'>\r
-</save><set>\r
- <parameter name="eipam-ip-block.status" value="PENDING-ACTIVE" /></set><save plugin="org.onap.ccsdk.sli.adaptors.resource.mdsal.ConfigResource" resource="eipam-ip-block">\r
- <parameter name="eipam-ip-block.status" value="PENDING-ACTIVE" /></save> <return status="success">\r
- \r
-</return></block></outcome><outcome value="Other"> \r
-\r
-<!--subnet and subnet_keys are deleted in the EIPAMPlugin--><execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="deletePool">\r
-\r
-<outcome value="success">\r
-<block><set>\r
- <parameter name="eipam-ip-block.status" value="DELETED" /></set><execute plugin='org.onap.ccsdk.sli.adaptors.aai.AAIService' method='setStatusMethod' >\r
-<parameter name="key1" value="IpBlockInstall failure and pool deleted in EIPAM."/>\r
-</execute><update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="vpe" key="vnf-id = $data-change-notification-input.key-data[0].key-value" pfx="vpe-after">\r
- <parameter name="operational-state" value="NCS_IP_SUBNET_INSTALL_ERROR" />\r
- <parameter name="summary-status" value="`$aai-summary-status-message`" />\r
- <parameter name="prov-status" value="PREPROV" />\r
-</update> <return status="failure">\r
- <parameter name="error-code" value="1000" />\r
- <parameter name="error-message" value="IpBlockInstall failure and deletePool deleted in EIPAM" />\r
-</return></block></outcome><outcome value="Other"> \r
-\r
-<block><save \r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' \r
- resource='SQL'\r
- key="UPDATE EIPAM_IP_SUBNETS\r
- SET status = 'ERROR'\r
- WHERE entity_id = $eipam-ip-block.entity-id ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-row'>\r
-</save><set>\r
- <parameter name="eipam-ip-block.status" value="ERROR" /></set><save plugin="org.onap.ccsdk.sli.adaptors.resource.mdsal.ConfigResource" resource="eipam-ip-block">\r
- <parameter name="eipam-ip-block.status" value="ERROR" /></save><execute plugin='org.onap.ccsdk.sli.adaptors.aai.AAIService' method='setStatusMethod' >\r
-<parameter name="key1" value="IpBlockInstall failure and pool deletion failed in EIPAM, need to manually delete."/></execute><update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="vpe" key="vnf-id = $data-change-notification-input.key-data[0].key-value" pfx="vpe-after">\r
- <parameter name="operational-state" value="NCS_IP_SUBNET_INSTALL_ERROR" />\r
- <parameter name="summary-status" value="`$aai-summary-status-message`" />\r
- <parameter name="prov-status" value="PREPROV" />\r
-</update> <return status="failure">\r
- <parameter name="error-code" value="1000" />\r
- <parameter name="error-message" value="IpBlockInstall failure and deletePool failed in EIPAM, need to manually delete" />\r
-</return></block></outcome></execute></outcome></configure></outcome><!--If no ptnii-name, check if VIPR or SRIOV--><outcome value=''><execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="startsWith" emitsOutcome='true' >\r
-<parameter name="source" value="`toUpperCase($eipam-ip-block.plan-name)`" />\r
-<parameter name="target" value="AIC_" />\r
-\r
-<outcome value='false'>\r
- <return status="failure">\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Unknown Address Plan - not supported!" />\r
-</return></outcome><outcome value='true'>\r
-<block atomic='true'><get-resource\r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'\r
- resource='SQL'\r
- key="SELECT * FROM EIPAM_IP_POOLS where plan_name = $eipam-ip-block.plan-name and level = 2 and key_value = $tmp.level2-key-value ;"\r
- pfx='tmp.eipam-pool-row'>\r
-\r
-<outcome value='failure'>\r
-<block atomic='true'><record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
-<parameter name="logger" value="message-log"/>\r
-<parameter name="field1" value="__TIMESTAMP__"/>\r
-<parameter name="field2" value="subnet-allocated-notification"/>\r
-<parameter name="field3" value="`$eipam-ip-block.request-id`"/>\r
-<parameter name="field4" value="`$eipam-ip-block.entity-id`"/>\r
-<parameter name="field5" value="`$eipam-ip-block.ptnii-name`"/>\r
-<parameter name="field6" value="`$eipam-ip-block.ip-address`"/>\r
-<parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>\r
-<parameter name="field8" value="`$eipam-ip-block.status`"/>\r
-<parameter name="field9" value="Failed to find this record in DB!"/>\r
-\r
-</record> <return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Unknown EIPAM pool - not found in DB!" />\r
-</return></block></outcome><outcome value="not-found"><block atomic='true'><record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
-<parameter name="logger" value="message-log"/>\r
-<parameter name="field1" value="__TIMESTAMP__"/>\r
-<parameter name="field2" value="subnet-allocated-notification"/>\r
-<parameter name="field3" value="`$eipam-ip-block.request-id`"/>\r
-<parameter name="field4" value="`$eipam-ip-block.entity-id`"/>\r
-<parameter name="field5" value="`$eipam-ip-block.ptnii-name`"/>\r
-<parameter name="field6" value="`$eipam-ip-block.ip-address`"/>\r
-<parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>\r
-<parameter name="field8" value="`$eipam-ip-block.status`"/>\r
-<parameter name="field9" value="This record is not found in DB!"/></record> <return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Unknown EIPAM pool - not found in DB!" />\r
-</return></block></outcome></get-resource><!--initial subnet should exists--><get-resource\r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'\r
- resource='SQL'\r
- key="SELECT * from EIPAM_IP_SUBNETS s, EIPAM_IP_SUBNET_KEYS k WHERE s.plan_name = $eipam-ip-block.plan-name and s.entity_id = k.entity_id and k.level = 2 and k.key_value = $tmp.level2-key-value and s.address_family = $tmp.version ; "\r
- pfx='pfx.eipam-initial-subnet'>\r
-\r
-<outcome value='failure'>\r
-<return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Query to DB table EIPAM_IP_SUBNET_KEYS and EIPAM_IP_SUBNETS failed." />\r
- </return></outcome><outcome value="not-found"><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Initial subnet not found, cannot auto extend." />\r
- </return></outcome></get-resource><!--check if new subnet already exists, possibly from previous attempt.--><get-resource\r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'\r
- resource='SQL'\r
- key="SELECT * from EIPAM_IP_SUBNETS s WHERE s.plan_name = $eipam-ip-block.plan-name and s.entity_id = $eipam-ip-block.entity-id and s.ip_address = $eipam-ip-block.ip-address ; "\r
- pfx='pfx.eipam-subnet-with-same-ip'>\r
-\r
-<outcome value='failure'>\r
-<return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Query to DB table EIPAM_IP_SUBNET_KEYS and EIPAM_IP_SUBNETS failed." />\r
- </return></outcome><outcome value="not-found"></outcome></get-resource><get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" \r
- resource="l3-network" \r
- key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id" \r
- local-only="false" \r
- pfx="aai.l3-network">\r
-<outcome value='not-found'>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="404" />\r
- <parameter name="error-message" value="'l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + 'Not found in AnAI'" /></return></outcome><outcome value='failure'>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="'Error retrieving l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + 'from AnAI'" /></return></outcome></get-resource><set>\r
-<parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
-</set><save\r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'\r
- resource='SQL'\r
- key="INSERT EIPAM_IP_SUBNETS\r
- SET\r
- entity_id = $eipam-ip-block.entity-id ,\r
- service_type = $pfx.eipam-initial-subnet.service-type ,\r
- ip_address = $eipam-ip-block.ip-prefix ,\r
- prefix_length = $eipam-ip-block.mask ,\r
- plan_name = $eipam-ip-block.plan-name ,\r
- status = 'PENDING_ACTIVE' ,\r
- pool_id = $pfx.eipam-initial-subnet.pool-id ,\r
- address_family = $pfx.eipam-initial-subnet.address-family ,\r
- network_id = $pfx.eipam-initial-subnet.network-id ; "\r
- force='true'\r
- pfx='pfx.eipam-new-subnet'>\r
-<outcome value='failure'><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Insert to DB table EIPAM_IP_SUBNETS failed." />\r
- </return></outcome><outcome value='success'>\r
-</outcome></save><save\r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'\r
- resource='SQL'\r
- key="INSERT EIPAM_IP_SUBNET_KEYS\r
- SET\r
- entity_id = $eipam-ip-block.entity-id ,\r
- key_name = $tmp.level1-key-name ,\r
- key_value = $tmp.level1-key-value ,\r
- level = 1 ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-level1'>\r
-<outcome value='success'>\r
-</outcome><outcome value='failure'><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Insert to DB table EIPAM_IP_SUBNET_KEYS failed." />\r
- </return></outcome></save><save\r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'\r
- resource='SQL'\r
- key="INSERT EIPAM_IP_SUBNET_KEYS\r
- SET\r
- entity_id = $eipam-ip-block.entity-id ,\r
- key_name = $tmp.level2-key-name ,\r
- key_value = $tmp.level2-key-value ,\r
- level = 2 ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-level2'>\r
-<outcome value='success'>\r
-</outcome><outcome value='failure'><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Insert to DB table EIPAM_IP_SUBNET_KEYS failed." />\r
- </return></outcome></save><record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
-<parameter name="logger" value="message-log"/>\r
-<parameter name="field1" value="__TIMESTAMP__"/>\r
-<parameter name="field2" value="Added an entry for subnet-allocated-notification in EIPAM_IP_SUBNETS and EIPAM_IP_SUBNET_KEYS"/>\r
-<parameter name="field3" value="`$eipam-ip-block.request-id`"/>\r
-<parameter name="field4" value="`$eipam-ip-block.entity-id`"/>\r
-<parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>\r
-<parameter name="field6" value="`$eipam-ip-block.ip-address`"/>\r
-<parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>\r
-<parameter name="field8" value="`$eipam-ip-block.status`"/>\r
-<parameter name="field9" value="`$tmp.key-value`"/></record><get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" \r
- resource="subnet" \r
- key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id\r
- AND subnet.subnet-id = $eipam-ip-block.entity-id"\r
- local-only="false" \r
- pfx="tmp.aai-initial-subnet">\r
-<outcome value='not-found'>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="404" />\r
- <parameter name="error-message" value="'l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' is Not found in AnAI'" /></return></outcome><outcome value='failure'>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="'Error retrieving l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' from AnAI'" /></return></outcome></get-resource><switch test='`$aai.l3-network.subnets.subnet_length`'>\r
-<outcome value=''>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="404" />\r
- <parameter name="error-message" value="'No subnets found in AAI for network-id=' + $pfx.eipam-initial-subnet.network-id" /></return></outcome><outcome value='Other'>\r
-<set>\r
-<parameter name='tmp.l3-network.subnet.subnet-name' value="`$aai.l3-network.network-name + '_S' + $aai.l3-network.subnets.subnet_length`" />\r
-</set></outcome></switch><execute plugin="com.att.sdnctl.sli.plugin.ipAddressTools.IpAddressTool" method="getSubnetAddresses">\r
- <parameter name="ipAddress" value="`$eipam-ip-block.ip-prefix`" />\r
- <parameter name="ipVersion" value="`tmp.version`" />\r
- <parameter name="subnet" value="`$eipam-ip-block.prefix-length`" />\r
- <parameter name="ctxGateway" value="tmp.return.generate.gateway-address" />\r
- <parameter name="ctxDhcpStart" value="tmp.return.generate.dhcp-start-address" />\r
- <parameter name="ctxDhcpEnd" value="tmp.return.generate.dhcp-end-address" />\r
-\r
-<outcome value='failure'>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Failed to generate gateway addresses using IpAddressTools" /></return></outcome></execute><switch test='`$tmp.aai-initial-subnet.dhcp-enabled`'>\r
-<outcome value='Y'>\r
-<block atomic="true"><set>\r
-<parameter name='tmp.l3-network.subnet.dhcp-enabled' value='true' />\r
-<parameter name='tmp.l3-network.subnet.dhcp-start' value='`$tmp.return.generate.dhcp-start-address`' />\r
-<parameter name='tmp.l3-network.subnet.dhcp-end' value='`$tmp.return.generate.dhcp-end-address`' />\r
-\r
-\r
-</set></block></outcome><outcome value='N'>\r
-<block atomic="true"><set>\r
-<parameter name='tmp.l3-network.subnet.dhcp-enabled' value='false' />\r
-<parameter name='tmp.l3-network.subnet.dhcp-start' value='' />\r
-<parameter name='tmp.l3-network.subnet.dhcp-end' value='' />\r
-\r
-\r
-</set></block></outcome></switch><save plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" \r
- resource="subnet" \r
- key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id \r
- AND subnet.subnet-id = $eipam-ip-block.entity-id" >\r
-<!-- Create l3-network object -->\r
-<parameter name="network-id" value="`$pfx.eipam-initial-subnet.network-id`" />\r
-<parameter name="subnet-id" value="`$eipam-ip-block.entity-id`" />\r
-<parameter name="subnet-name" value="`$tmp.l3-network.subnet.subnet-name`" />\r
-<parameter name="gateway-address" value="`$tmp.return.generate.gateway-address`" />\r
-<parameter name="network-start-address" value="`$eipam-ip-block.ip-prefix`" />\r
-<parameter name="cidr-mask" value="`$eipam-ip-block.prefix-length`" />\r
-<parameter name="ip-version" value="`$tmp.version`" />\r
-<parameter name="dhcp-start" value="`$tmp.l3-network.subnet.dhcp-start`" />\r
-<parameter name="dhcp-end" value="`$tmp.l3-network.subnet.dhcp-end`" />\r
-<parameter name="dhcp-enabled" value="`$tmp.l3-network.subnet.dhcp-enabled`" />\r
-<parameter name="orchestration-status" value="PendingCreate" /><outcome value='failure'>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="'Cannot save subnet with l3 network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' in AnAI'" /></return></outcome><outcome value='not-found'>\r
-</outcome></save><record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
-<parameter name="logger" value="message-log"/>\r
-<parameter name="field1" value="__TIMESTAMP__"/>\r
-<parameter name="field2" value="Added a subnetin AAI"/>\r
-<parameter name="field3" value="`$eipam-ip-block.request-id`"/>\r
-<parameter name="field4" value="`$eipam-ip-block.entity-id`"/>\r
-<parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>\r
-<parameter name="field6" value="`$eipam-ip-block.ip-address`"/>\r
-<parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>\r
-<parameter name="field8" value="`$eipam-ip-block.status`"/>\r
-<parameter name="field9" value="`$tmp.key-value`"/></record><execute plugin='org.onap.ccsdk.sli.plugins.contrail.ContrailAdaptor' method='sendContrailRequest' emitsOutcome='true' >\r
-<parameter name='api-name' value='subnet' />\r
-<parameter name='api-action' value='add' />\r
-<parameter name='resp-prefix' value='contrailResp' />\r
-<parameter name='contrail-virtual-network-id' value='`$pfx.eipam-initial-subnet.network-id`' />\r
-<parameter name='ip-prefix' value='`$eipam-ip-block.ip-prefix`' />\r
-<parameter name='ip-prefix-len' value='`$eipam-ip-block.prefix-length`' />\r
-<parameter name='dns-server-address' value='0.0.0.0' />\r
-<parameter name='enable-dhcp' value='`$tmp.l3-network.subnet.dhcp-enabled`' />\r
-<parameter name='default-gateway' value='`$tmp.return.generate.gateway-address`' />\r
-<parameter name='subnet-name' value='`$tmp.l3-network.subnet.subnet-name`' />\r
-<parameter name='start' value='`$tmp.l3-network.subnet.dhcp-start`' />\r
-<parameter name='end' value='`$tmp.l3-network.subnet.dhcp-end`' />\r
-<outcome value='success'>\r
-<block>\r
-</block></outcome><outcome value='failure'>\r
-<block>\r
-<set>\r
- <parameter name="eipam-ip-block.status" value="ERROR" /></set><save \r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' \r
- resource='SQL'\r
- key="UPDATE EIPAM_IP_SUBNETS\r
- SET status = 'ERROR'\r
- WHERE entity_id = $eipam-ip-block.entity-id ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-row'>\r
-<outcome value='failure'>\r
-<return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />\r
- </return></outcome><outcome value="not-found"><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />\r
- </return></outcome></save><delete plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" \r
- resource="subnet" \r
- key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id\r
- AND subnet.subnet-id = $eipam-ip-block.entity-id"></delete><save plugin="org.onap.ccsdk.sli.adaptors.resource.mdsal.ConfigResource" resource="eipam-ip-block">\r
- <parameter name="eipam-ip-block.status" value="ERROR" /></save><return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'Failed to create subnet in Contrail. '+ $contrailResp.resp-code + ':' +$contrailResp.resp-message `" />\r
-</return></block></outcome></execute><record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
-<parameter name="logger" value="message-log"/>\r
-<parameter name="field1" value="__TIMESTAMP__"/>\r
-<parameter name="field2" value="Added a subnet in Contrail"/>\r
-<parameter name="field3" value="`$eipam-ip-block.request-id`"/>\r
-<parameter name="field4" value="`$eipam-ip-block.entity-id`"/>\r
-<parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>\r
-<parameter name="field6" value="`$eipam-ip-block.ip-address`"/>\r
-<parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>\r
-<parameter name="field8" value="`$eipam-ip-block.status`"/>\r
-<parameter name="field9" value="`$tmp.key-value`"/></record><update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" \r
- resource="subnet" \r
- key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id \r
- AND subnet.subnet-id = $eipam-ip-block.entity-id" >\r
- <parameter name="orchestration-status" value="Created" />\r
- <outcome value='not-found'>\r
-</outcome><outcome value='failure'>\r
-<block>\r
-<record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
-<parameter name="logger" value="message-log"/>\r
-<parameter name="field1" value="__TIMESTAMP__"/>\r
-<parameter name="field2" value="Update status to Created failed in AAI"/>\r
-<parameter name="field3" value="`$eipam-ip-block.request-id`"/>\r
-<parameter name="field4" value="`$eipam-ip-block.entity-id`"/>\r
-<parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>\r
-<parameter name="field6" value="`$eipam-ip-block.ip-address`"/>\r
-<parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>\r
-<parameter name="field8" value="`$eipam-ip-block.status`"/>\r
-<parameter name="field9" value="`$tmp.key-value`"/></record><save \r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' \r
- resource='SQL'\r
- key="UPDATE EIPAM_IP_SUBNETS\r
- SET status = 'ERROR'\r
- WHERE entity_id = $eipam-ip-block.entity-id ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-row'>\r
-<outcome value='failure'>\r
-<return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />\r
- </return></outcome><outcome value="not-found"><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />\r
- </return></outcome></save><delete plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" \r
- resource="subnet" \r
- key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id\r
- AND subnet.subnet-id = $eipam-ip-block.entity-id"></delete><execute plugin='org.onap.ccsdk.sli.plugins.contrail.ContrailAdaptor' method='sendContrailRequest' emitsOutcome='true' >\r
-<parameter name='api-name' value='subnet' />\r
-<parameter name='api-action' value='delete' />\r
-<parameter name='resp-prefix' value='contrailResp' />\r
-<parameter name='contrail-virtual-network-id' value='`$pfx.eipam-initial-subnet.network-id`' />\r
-<parameter name='ip-prefix' value='`$eipam-ip-block.ip-prefix`' />\r
-<outcome value='failure'>\r
-<return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'Failed to delete subnet in Contrail. '+ $contrailResp.resp-code + ':' +$contrailResp.resp-message `" />\r
-</return></outcome></execute><set>\r
- <parameter name="eipam-ip-block.status" value="ERROR" /></set><return status='failure'>\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="'Cannot save subnet status to Created with l3 network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' in AnAI'" /></return></block></outcome></update><save \r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' \r
- resource='SQL'\r
- key="UPDATE EIPAM_IP_SUBNETS\r
- SET status = 'CREATED'\r
- WHERE entity_id = $eipam-ip-block.entity-id ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-row'>\r
-<outcome value='failure'>\r
-<return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to CREATED in mysql." />\r
- </return></outcome><outcome value="not-found"><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to CREATED in mysql." />\r
- </return></outcome></save><!--subnet and subnet_keys are deleted in the EIPAMPlugin--><execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="activateSubnet">\r
-<outcome value='failure'><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while activating subnet in EIPAM." />\r
- </return></outcome></execute><save \r
- plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' \r
- resource='SQL'\r
- key="UPDATE EIPAM_IP_SUBNETS\r
- SET status = 'ACTIVE'\r
- WHERE entity_id = $eipam-ip-block.entity-id ; "\r
- force='true'\r
- pfx='pfx.eipam-subnet-row'>\r
-<outcome value='failure'>\r
-<return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to active in mysql." />\r
- </return></outcome><outcome value="not-found"><return status="failure">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while updating subnet to active in mysql." />\r
- </return></outcome><outcome value='success'>\r
-</outcome></save><update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" \r
- resource="subnet" \r
- key="l3-network.network-id = $aai.l3-network.network-id \r
- AND subnet.subnet-id = $eipam-ip-block.entity-id" >\r
-<parameter name="orchestration-status" value="Created" />\r
- <outcome value='failure'>\r
-<return status="failure">\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Failure updating orchestration-status in AAI for subnet." />\r
- </return></outcome><outcome value="not-found"><return status="failure">\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="Failure updating orchestration-status in AAI for subnet. Subnet not found." />\r
- </return></outcome></update> <return status="success">\r
- <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />\r
-</return></block></outcome></execute></outcome></switch></block></method></service-logic>
+<service-logic
+ xmlns='http://www.onap.org/sdnc/svclogic'
+ xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='SUBNET-API' version='${project.version}'>
+ <method rpc='subnet-allocated-notification' mode='sync'>
+ <block>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="subnet-allocated-notification"/>
+ <parameter name="field3" value="`$eipam-ip-block.request-id`"/>
+ <parameter name="field4" value="`$eipam-ip-block.entity-id`"/>
+ <parameter name="field5" value="`$eipam-ip-block.ptnii-name`"/>
+ <parameter name="field6" value="`$eipam-ip-block.ip-address`"/>
+ <parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>
+ <parameter name="field8" value="`$eipam-ip-block.status`"/>
+ <parameter name="field9" value="`$tmp.key-value`"/>
+ </record>
+ <!--Need to know which ipv version to get the plan name from the network-model.-->
+ <switch test="`$eipam-ip-block.ptnii-name`">
+ <!--If there's ptnii-name, then it's Gamma service-->
+ <outcome value='Other'>
+ <block>
+ <configure adaptor="com.att.sdnctl.sli.adaptor.ncs.ncsAdaptor" key="SNIIR" activate="true">
+ <parameter name="input.request-id" value="`$eipam-ip-block.request-id`" />
+ <parameter name="input.source" value="SDNC" />
+ <parameter name="input.ptnii-name" value="`$eipam-ip-block.ptnii-name`" />
+ <parameter name="input.ip-address" value="`$eipam-ip-block.ip-address`" />
+ <parameter name="input.mask" value="`$eipam-ip-block.prefix-length`" />
+ <outcome value="success">
+ <block>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="UPDATE EIPAM_IP_SUBNETS
+ SET status = 'PENDING-ACTIVE'
+ WHERE entity_id = $eipam-ip-block.entity-id ; "
+ force='true'
+ pfx='pfx.eipam-subnet-row'></save>
+ <set>
+ <parameter name="eipam-ip-block.status" value="PENDING-ACTIVE" />
+ </set>
+ <save plugin="org.onap.ccsdk.sli.adaptors.resource.mdsal.ConfigResource" resource="eipam-ip-block">
+ <parameter name="eipam-ip-block.status" value="PENDING-ACTIVE" />
+ </save>
+ <return status="success"></return>
+ </block>
+ </outcome>
+ <outcome value="Other">
+ <!--subnet and subnet_keys are deleted in the EIPAMPlugin-->
+ <execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="deletePool">
+ <outcome value="success">
+ <block>
+ <set>
+ <parameter name="eipam-ip-block.status" value="DELETED" />
+ </set>
+ <return status="failure">
+ <parameter name="error-code" value="1000" />
+ <parameter name="error-message" value="IpBlockInstall failure and deletePool deleted in EIPAM" />
+ </return>
+ </block>
+ </outcome>
+ <outcome value="Other">
+ <block>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="UPDATE EIPAM_IP_SUBNETS
+ SET
+ status = 'ERROR',
+ dealloc_failure = 'deletePool failed in response to NCS_IP_SUBNET_INSTALL_ERROR'
+ WHERE entity_id = $eipam-ip-block.entity-id ; "
+ force='true'
+ pfx='pfx.eipam-subnet-row'></save>
+ <set>
+ <parameter name="eipam-ip-block.status" value="NCS_IP_SUBNET_INSTALL_ERROR" />
+ </set>
+ <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="generic-vnf" key="generic-vnf.vnf-id = $tmp.vpe-pool.vpe-id" pfx="vpe-after">
+ <parameter name="operational-status" value="NCS_IP_SUBNET_INSTALL_ERROR" />
+ <parameter name="summary-status" value="`$aai-summary-status-message`" />
+ <parameter name="prov-status" value="PREPROV" />
+ </update>
+ <return status="failure">
+ <parameter name="error-code" value="1000" />
+ <parameter name="error-message" value="IpBlockInstall failure and deletePool failed in EIPAM, need to manually delete" />
+ </return>
+ </block>
+ </outcome>
+ </execute>
+ </outcome>
+ </configure>
+ </block>
+ </outcome>
+ <!--If no ptnii-name, check if VIPR or SRIOV-->
+ <outcome value=''>
+ <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="startsWith" emitsOutcome='true' >
+ <parameter name="source" value="`toUpperCase($eipam-ip-block.plan-name)`" />
+ <parameter name="target" value="AIC_" />
+ <outcome value='false'>
+ <return status="failure">
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="Unknown Address Plan - not supported!" />
+ </return>
+ </outcome>
+ <outcome value='true'>
+ <block atomic='true'>
+ <get-resource
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="SELECT * FROM EIPAM_IP_POOLS where plan_name = $eipam-ip-block.plan-name and level = 2 and key_value = $tmp.level2-key-value ;"
+ pfx='tmp.eipam-pool-row'>
+ <outcome value='failure'>
+ <block atomic='true'>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="subnet-allocated-notification"/>
+ <parameter name="field3" value="`$eipam-ip-block.request-id`"/>
+ <parameter name="field4" value="`$eipam-ip-block.entity-id`"/>
+ <parameter name="field5" value="`$eipam-ip-block.ptnii-name`"/>
+ <parameter name="field6" value="`$eipam-ip-block.ip-address`"/>
+ <parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>
+ <parameter name="field8" value="`$eipam-ip-block.status`"/>
+ <parameter name="field9" value="Failed to find this record in DB!"/>
+ </record>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="Unknown EIPAM pool - not found in DB!" />
+ </return>
+ </block>
+ </outcome>
+ <outcome value="not-found">
+ <block atomic='true'>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="subnet-allocated-notification"/>
+ <parameter name="field3" value="`$eipam-ip-block.request-id`"/>
+ <parameter name="field4" value="`$eipam-ip-block.entity-id`"/>
+ <parameter name="field5" value="`$eipam-ip-block.ptnii-name`"/>
+ <parameter name="field6" value="`$eipam-ip-block.ip-address`"/>
+ <parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>
+ <parameter name="field8" value="`$eipam-ip-block.status`"/>
+ <parameter name="field9" value="This record is not found in DB!"/>
+ </record>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="Unknown EIPAM pool - not found in DB!" />
+ </return>
+ </block>
+ </outcome>
+ </get-resource>
+ <!--initial subnet should exists-->
+ <get-resource
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="SELECT * from EIPAM_IP_SUBNETS s, EIPAM_IP_SUBNET_KEYS k WHERE s.plan_name = $eipam-ip-block.plan-name and s.entity_id = k.entity_id and k.level = 2 and k.key_value = $tmp.level2-key-value and s.address_family = $tmp.version ; "
+ pfx='pfx.eipam-initial-subnet'>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Query to DB table EIPAM_IP_SUBNET_KEYS and EIPAM_IP_SUBNETS failed." />
+ </return>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Initial subnet not found, cannot auto extend." />
+ </return>
+ </outcome>
+ </get-resource>
+ <!--check if new subnet already exists, possibly from previous attempt.-->
+ <get-resource
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="SELECT * from EIPAM_IP_SUBNETS s WHERE s.plan_name = $eipam-ip-block.plan-name and s.entity_id = $eipam-ip-block.entity-id and s.ip_address = $eipam-ip-block.ip-address ; "
+ pfx='pfx.eipam-subnet-with-same-ip'>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Query to DB table EIPAM_IP_SUBNET_KEYS and EIPAM_IP_SUBNETS failed." />
+ </return>
+ </outcome>
+ <outcome value="not-found"></outcome>
+ </get-resource>
+ <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+ resource="l3-network"
+ key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id"
+ local-only="false"
+ pfx="aai.l3-network">
+ <outcome value='not-found'>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="'l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + 'Not found in AnAI'" />
+ </return>
+ </outcome>
+ <outcome value='failure'>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="'Error retrieving l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + 'from AnAI'" />
+ </return>
+ </outcome>
+ </get-resource>
+ <set>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ </set>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="INSERT EIPAM_IP_SUBNETS
+ SET
+ entity_id = $eipam-ip-block.entity-id ,
+ service_type = $pfx.eipam-initial-subnet.service-type ,
+ ip_address = $eipam-ip-block.ip-prefix ,
+ prefix_length = $eipam-ip-block.mask ,
+ plan_name = $eipam-ip-block.plan-name ,
+ status = 'PENDING_ACTIVE' ,
+ pool_id = $pfx.eipam-initial-subnet.pool-id ,
+ address_family = $pfx.eipam-initial-subnet.address-family ,
+ network_id = $pfx.eipam-initial-subnet.network-id ; "
+ force='true'
+ pfx='pfx.eipam-new-subnet'>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Insert to DB table EIPAM_IP_SUBNETS failed." />
+ </return>
+ </outcome>
+ <outcome value='success'></outcome>
+ </save>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="INSERT EIPAM_IP_SUBNET_KEYS
+ SET
+ entity_id = $eipam-ip-block.entity-id ,
+ key_name = $tmp.level1-key-name ,
+ key_value = $tmp.level1-key-value ,
+ level = 1 ; "
+ force='true'
+ pfx='pfx.eipam-subnet-level1'>
+ <outcome value='success'></outcome>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Insert to DB table EIPAM_IP_SUBNET_KEYS failed." />
+ </return>
+ </outcome>
+ </save>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="INSERT EIPAM_IP_SUBNET_KEYS
+ SET
+ entity_id = $eipam-ip-block.entity-id ,
+ key_name = $tmp.level2-key-name ,
+ key_value = $tmp.level2-key-value ,
+ level = 2 ; "
+ force='true'
+ pfx='pfx.eipam-subnet-level2'>
+ <outcome value='success'></outcome>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Insert to DB table EIPAM_IP_SUBNET_KEYS failed." />
+ </return>
+ </outcome>
+ </save>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="Added an entry for subnet-allocated-notification in EIPAM_IP_SUBNETS and EIPAM_IP_SUBNET_KEYS"/>
+ <parameter name="field3" value="`$eipam-ip-block.request-id`"/>
+ <parameter name="field4" value="`$eipam-ip-block.entity-id`"/>
+ <parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>
+ <parameter name="field6" value="`$eipam-ip-block.ip-address`"/>
+ <parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>
+ <parameter name="field8" value="`$eipam-ip-block.status`"/>
+ <parameter name="field9" value="`$tmp.key-value`"/>
+ </record>
+ <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id
+ AND subnet.subnet-id = $eipam-ip-block.entity-id"
+ local-only="false"
+ pfx="tmp.aai-initial-subnet">
+ <outcome value='not-found'>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="'l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' is Not found in AnAI'" />
+ </return>
+ </outcome>
+ <outcome value='failure'>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="'Error retrieving l3-network with network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' from AnAI'" />
+ </return>
+ </outcome>
+ </get-resource>
+ <switch test='`$aai.l3-network.subnets.subnet_length`'>
+ <outcome value=''>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="'No subnets found in AAI for network-id=' + $pfx.eipam-initial-subnet.network-id" />
+ </return>
+ </outcome>
+ <outcome value='Other'>
+ <set>
+ <parameter name='tmp.l3-network.subnet.subnet-name' value="`$aai.l3-network.network-name + '_S' + $aai.l3-network.subnets.subnet_length`" />
+ </set>
+ </outcome>
+ </switch>
+ <execute plugin="com.att.sdnctl.sli.plugin.ipAddressTools.IpAddressTool" method="getSubnetAddresses">
+ <parameter name="ipAddress" value="`$eipam-ip-block.ip-prefix`" />
+ <parameter name="ipVersion" value="`tmp.version`" />
+ <parameter name="subnet" value="`$eipam-ip-block.prefix-length`" />
+ <parameter name="ctxGateway" value="tmp.return.generate.gateway-address" />
+ <parameter name="ctxDhcpStart" value="tmp.return.generate.dhcp-start-address" />
+ <parameter name="ctxDhcpEnd" value="tmp.return.generate.dhcp-end-address" />
+ <outcome value='failure'>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name='ack-final' value='Y'/>
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="Failed to generate gateway addresses using IpAddressTools" />
+ </return>
+ </outcome>
+ </execute>
+ <switch test='`$tmp.aai-initial-subnet.dhcp-enabled`'>
+ <outcome value='Y'>
+ <block atomic="true">
+ <set>
+ <parameter name='tmp.l3-network.subnet.dhcp-enabled' value='true' />
+ <parameter name='tmp.l3-network.subnet.dhcp-start' value='`$tmp.return.generate.dhcp-start-address`' />
+ <parameter name='tmp.l3-network.subnet.dhcp-end' value='`$tmp.return.generate.dhcp-end-address`' />
+ </set>
+ </block>
+ </outcome>
+ <outcome value='N'>
+ <block atomic="true">
+ <set>
+ <parameter name='tmp.l3-network.subnet.dhcp-enabled' value='false' />
+ <parameter name='tmp.l3-network.subnet.dhcp-start' value='' />
+ <parameter name='tmp.l3-network.subnet.dhcp-end' value='' />
+ </set>
+ </block>
+ </outcome>
+ </switch>
+ <save plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id
+ AND subnet.subnet-id = $eipam-ip-block.entity-id" >
+ <!-- Create l3-network object -->
+ <parameter name="network-id" value="`$pfx.eipam-initial-subnet.network-id`" />
+ <parameter name="subnet-id" value="`$eipam-ip-block.entity-id`" />
+ <parameter name="subnet-name" value="`$tmp.l3-network.subnet.subnet-name`" />
+ <parameter name="gateway-address" value="`$tmp.return.generate.gateway-address`" />
+ <parameter name="network-start-address" value="`$eipam-ip-block.ip-prefix`" />
+ <parameter name="cidr-mask" value="`$eipam-ip-block.prefix-length`" />
+ <parameter name="ip-version" value="`$tmp.version`" />
+ <parameter name="dhcp-start" value="`$tmp.l3-network.subnet.dhcp-start`" />
+ <parameter name="dhcp-end" value="`$tmp.l3-network.subnet.dhcp-end`" />
+ <parameter name="dhcp-enabled" value="`$tmp.l3-network.subnet.dhcp-enabled`" />
+ <parameter name="orchestration-status" value="PendingCreate" />
+ <outcome value='failure'>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="'Cannot save subnet with l3 network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' in AnAI'" />
+ </return>
+ </outcome>
+ <outcome value='not-found'></outcome>
+ </save>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="Added a subnetin AAI"/>
+ <parameter name="field3" value="`$eipam-ip-block.request-id`"/>
+ <parameter name="field4" value="`$eipam-ip-block.entity-id`"/>
+ <parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>
+ <parameter name="field6" value="`$eipam-ip-block.ip-address`"/>
+ <parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>
+ <parameter name="field8" value="`$eipam-ip-block.status`"/>
+ <parameter name="field9" value="`$tmp.key-value`"/>
+ </record>
+ <execute plugin='org.onap.ccsdk.sli.plugins.contrail.ContrailAdaptor' method='sendContrailRequest' emitsOutcome='true' >
+ <parameter name='api-name' value='subnet' />
+ <parameter name='api-action' value='add' />
+ <parameter name='resp-prefix' value='contrailResp' />
+ <parameter name='contrail-virtual-network-id' value='`$pfx.eipam-initial-subnet.network-id`' />
+ <parameter name='ip-prefix' value='`$eipam-ip-block.ip-prefix`' />
+ <parameter name='ip-prefix-len' value='`$eipam-ip-block.prefix-length`' />
+ <parameter name='dns-server-address' value='0.0.0.0' />
+ <parameter name='enable-dhcp' value='`$tmp.l3-network.subnet.dhcp-enabled`' />
+ <parameter name='default-gateway' value='`$tmp.return.generate.gateway-address`' />
+ <parameter name='subnet-name' value='`$tmp.l3-network.subnet.subnet-name`' />
+ <parameter name='start' value='`$tmp.l3-network.subnet.dhcp-start`' />
+ <parameter name='end' value='`$tmp.l3-network.subnet.dhcp-end`' />
+ <outcome value='success'>
+ <block></block>
+ </outcome>
+ <outcome value='failure'>
+ <block>
+ <set>
+ <parameter name="eipam-ip-block.status" value="ERROR" />
+ </set>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="UPDATE EIPAM_IP_SUBNETS
+ SET status = 'ERROR'
+ WHERE entity_id = $eipam-ip-block.entity-id ; "
+ force='true'
+ pfx='pfx.eipam-subnet-row'>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />
+ </return>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />
+ </return>
+ </outcome>
+ </save>
+ <delete plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id
+ AND subnet.subnet-id = $eipam-ip-block.entity-id"></delete>
+ <save plugin="org.onap.ccsdk.sli.adaptors.resource.mdsal.ConfigResource" resource="eipam-ip-block">
+ <parameter name="eipam-ip-block.status" value="ERROR" />
+ </save>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="`'Failed to create subnet in Contrail. '+ $contrailResp.resp-code + ':' +$contrailResp.resp-message `" />
+ </return>
+ </block>
+ </outcome>
+ </execute>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="Added a subnet in Contrail"/>
+ <parameter name="field3" value="`$eipam-ip-block.request-id`"/>
+ <parameter name="field4" value="`$eipam-ip-block.entity-id`"/>
+ <parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>
+ <parameter name="field6" value="`$eipam-ip-block.ip-address`"/>
+ <parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>
+ <parameter name="field8" value="`$eipam-ip-block.status`"/>
+ <parameter name="field9" value="`$tmp.key-value`"/>
+ </record>
+ <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id
+ AND subnet.subnet-id = $eipam-ip-block.entity-id" >
+ <parameter name="orchestration-status" value="Created" />
+ <outcome value='not-found'></outcome>
+ <outcome value='failure'>
+ <block>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="Update status to Created failed in AAI"/>
+ <parameter name="field3" value="`$eipam-ip-block.request-id`"/>
+ <parameter name="field4" value="`$eipam-ip-block.entity-id`"/>
+ <parameter name="field5" value="`$pfx.eipam-initial-subnet.network-id`"/>
+ <parameter name="field6" value="`$eipam-ip-block.ip-address`"/>
+ <parameter name="field7" value="`$eipam-ip-block.prefix-length`"/>
+ <parameter name="field8" value="`$eipam-ip-block.status`"/>
+ <parameter name="field9" value="`$tmp.key-value`"/>
+ </record>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="UPDATE EIPAM_IP_SUBNETS
+ SET status = 'ERROR'
+ WHERE entity_id = $eipam-ip-block.entity-id ; "
+ force='true'
+ pfx='pfx.eipam-subnet-row'>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />
+ </return>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to ERROR in mysql." />
+ </return>
+ </outcome>
+ </save>
+ <delete plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $pfx.eipam-initial-subnet.network-id
+ AND subnet.subnet-id = $eipam-ip-block.entity-id"></delete>
+ <execute plugin='org.onap.ccsdk.sli.plugins.contrail.ContrailAdaptor' method='sendContrailRequest' emitsOutcome='true' >
+ <parameter name='api-name' value='subnet' />
+ <parameter name='api-action' value='delete' />
+ <parameter name='resp-prefix' value='contrailResp' />
+ <parameter name='contrail-virtual-network-id' value='`$pfx.eipam-initial-subnet.network-id`' />
+ <parameter name='ip-prefix' value='`$eipam-ip-block.ip-prefix`' />
+ <outcome value='failure'>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="`'Failed to delete subnet in Contrail. '+ $contrailResp.resp-code + ':' +$contrailResp.resp-message `" />
+ </return>
+ </outcome>
+ </execute>
+ <set>
+ <parameter name="eipam-ip-block.status" value="ERROR" />
+ </set>
+ <return status='failure'>
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="'Cannot save subnet status to Created with l3 network-id=' + $pfx.eipam-initial-subnet.network-id + ' And subnet-id=' + $eipam-ip-block.entity-id + ' in AnAI'" />
+ </return>
+ </block>
+ </outcome>
+ </update>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="UPDATE EIPAM_IP_SUBNETS
+ SET status = 'CREATED'
+ WHERE entity_id = $eipam-ip-block.entity-id ; "
+ force='true'
+ pfx='pfx.eipam-subnet-row'>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to CREATED in mysql." />
+ </return>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to CREATED in mysql." />
+ </return>
+ </outcome>
+ </save>
+ <!--subnet and subnet_keys are deleted in the EIPAMPlugin-->
+ <execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="activateSubnet">
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while activating subnet in EIPAM." />
+ </return>
+ </outcome>
+ </execute>
+ <save
+ plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource'
+ resource='SQL'
+ key="UPDATE EIPAM_IP_SUBNETS
+ SET status = 'ACTIVE'
+ WHERE entity_id = $eipam-ip-block.entity-id ; "
+ force='true'
+ pfx='pfx.eipam-subnet-row'>
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to active in mysql." />
+ </return>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="An error occured while updating subnet to active in mysql." />
+ </return>
+ </outcome>
+ <outcome value='success'></outcome>
+ </save>
+ <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $aai.l3-network.network-id
+ AND subnet.subnet-id = $eipam-ip-block.entity-id" >
+ <parameter name="orchestration-status" value="Created" />
+ <outcome value='failure'>
+ <return status="failure">
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Failure updating orchestration-status in AAI for subnet." />
+ </return>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure">
+ <parameter name="error-code" value="500"/>
+ <parameter name="error-message" value="Failure updating orchestration-status in AAI for subnet. Subnet not found." />
+ </return>
+ </outcome>
+ </update>
+ <return status="success">
+ <parameter name='eipam-ip-block.request-id' value="`$eipam-ip-block.entity-id + '-' + $aai.l3-network.contrail-network-fqdn`" />
+ </return>
+ </block>
+ </outcome>
+ </execute>
+ </outcome>
+ </switch>
+ </block>
+ </method>
+</service-logic>
\ No newline at end of file
Code Review / sdnc / oam.git / blobdiff