-<service-logic xmlns='http://www.onap.org/sdnc/svclogic'\r
- xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'\r
- xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd'\r
- module='LCM' version='${project.version}'>\r
- <method rpc='upgrade-pre-check' mode='sync'>\r
- <block>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode'\r
- method='readProperties'>\r
- <parameter name='fileName'\r
- value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />\r
- <parameter name='contextPrefix' value='prop' />\r
- </execute>\r
- <set>\r
- <parameter name='status.code' value='200' />\r
- <parameter name='status.message'\r
- value='unexpected return from DG' />\r
- </set>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'\r
- method='reqExec'>\r
- <parameter name='AgentUrl'\r
- value='`$prop.ansible.agenturl`' />\r
- <parameter name='User' value='`$prop.ansible.user`' />\r
- <parameter name='Password' value='`prop.ansible.password`' />\r
- <parameter name='LocalParameters'\r
- value='`$prop.ansible.lcm.localparameters`' />\r
- <parameter name='EnvParameters'\r
- value='`$upgrade-pre-check-input.payload`' />\r
- <parameter name='NodeList'\r
- value='`$prop.ansible.nodelist`' />\r
- <parameter name='Timeout' value='`$prop.ansible.timeout`' />\r
- <parameter name='Version' value='`$prop.ansible.version`' />\r
- <parameter name='Id'\r
- value='`$upgrade-pre-check-input.common-header.request-id`' />\r
- <parameter name='PlaybookName'\r
- value='`$prop.lcm.upgrade-pre-check.playbookname`' />\r
- <outcome value='not-found'>\r
- <block>\r
- <set>\r
- <parameter\r
- name='org.onap.appc.adapter.ansible.result.code' value='401' />\r
- <parameter name='org.onap.appc.adapter.ansible.message'\r
- value='Ansible Adapter was not found' />\r
- </set>\r
- <block>\r
- <set>\r
- <parameter name='lcm-dmaap.version'\r
- value='`$prop.lcm.dmaap.version`' />\r
- <parameter name='lcm-dmaap.correlation-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.partition'\r
- value='`$prop.lcm.dmaap.partition`' />\r
- <parameter name='lcm-dmaap.rpc-name'\r
- value='upgrade-pre-check' />\r
- <parameter name='lcm-dmaap.type'\r
- value='`$prop.lcm.dmaap.type`' />\r
- <parameter name='lcm-dmaap.timestamp'\r
- value='`$upgrade-pre-check-input.common-header.timestamp`' />\r
- <parameter name='lcm-dmaap.api-ver'\r
- value='`$upgrade-pre-check-input.common-header.api-ver`' />\r
- <parameter name='lcm-dmaap.originator-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.request-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.sub-request-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.flags.mode'\r
- value='`$upgrade-pre-check-input.common-header.flags.mode`' />\r
- <parameter name='lcm-dmaap.flags.force'\r
- value='`$upgrade-pre-check-input.common-header.flags.force`' />\r
- <parameter name='lcm-dmaap.flags.ttl'\r
- value='`$upgrade-pre-check-input.common-header.flags.ttl`' />\r
- <parameter name='lcm-dmaap.payload'\r
- value='`$org.onap.appc.adapter.ansible.results`' />\r
- <parameter name='lcm-dmaap.status.code'\r
- value='`$org.onap.appc.adapter.ansible.result.code`' />\r
- <parameter name='lcm-dmaap.status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </set>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'\r
- method='sendRequest'>\r
- <parameter name='templateFileName'\r
- value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
- <parameter name='restapiUrl'\r
- value='`$prop.lcm.dmaap.url`' />\r
- <parameter name='restapiUser'\r
- value='`$prop.lcm.dmaap.user`' />\r
- <parameter name='restapiPassword'\r
- value='`$prop.lcm.dmaap.password`' />\r
- <parameter name='format' value='json' />\r
- <parameter name='httpMethod' value='POST' />\r
- <parameter name='contentType' value='application/json' />\r
- <parameter name="responsePrefix" value="lcm" />\r
- <outcome value='failure'>\r
- <record\r
- plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log" />\r
- <parameter name="field1"\r
- value='Failed to Publish to DMaap' />\r
- </record>\r
- </outcome>\r
- </execute>\r
- <return status='failure'>\r
- <parameter name='status.code' value='401' />\r
- <parameter name='status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </return>\r
- </block>\r
- </block>\r
- </outcome>\r
- <outcome value='failure'>\r
- <block>\r
- <set>\r
- <parameter name='lcm-dmaap.version'\r
- value='`$prop.lcm.dmaap.version`' />\r
- <parameter name='lcm-dmaap.correlation-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.partition'\r
- value='`$prop.lcm.dmaap.partition`' />\r
- <parameter name='lcm-dmaap.rpc-name'\r
- value='upgrade-pre-check' />\r
- <parameter name='lcm-dmaap.type'\r
- value='`$prop.lcm.dmaap.type`' />\r
- <parameter name='lcm-dmaap.timestamp'\r
- value='`$upgrade-pre-check-input.common-header.timestamp`' />\r
- <parameter name='lcm-dmaap.api-ver'\r
- value='`$upgrade-pre-check-input.common-header.api-ver`' />\r
- <parameter name='lcm-dmaap.originator-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.request-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.sub-request-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.flags.mode'\r
- value='`$upgrade-pre-check-input.common-header.flags.mode`' />\r
- <parameter name='lcm-dmaap.flags.force'\r
- value='`$upgrade-pre-check-input.common-header.flags.force`' />\r
- <parameter name='lcm-dmaap.flags.ttl'\r
- value='`$upgrade-pre-check-input.common-header.flags.ttl`' />\r
- <parameter name='lcm-dmaap.payload'\r
- value='`$org.onap.appc.adapter.ansible.results`' />\r
- <parameter name='lcm-dmaap.status.code'\r
- value='`$org.onap.appc.adapter.ansible.result.code`' />\r
- <parameter name='lcm-dmaap.status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </set>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'\r
- method='sendRequest'>\r
- <parameter name='templateFileName'\r
- value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
- <parameter name='restapiUrl'\r
- value='`$prop.lcm.dmaap.url`' />\r
- <parameter name='restapiUser'\r
- value='`$prop.lcm.dmaap.user`' />\r
- <parameter name='restapiPassword'\r
- value='`$prop.lcm.dmaap.password`' />\r
- <parameter name='format' value='json' />\r
- <parameter name='httpMethod' value='POST' />\r
- <parameter name='contentType' value='application/json' />\r
- <parameter name="responsePrefix" value="lcm" />\r
- <outcome value='failure'>\r
- <record\r
- plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log" />\r
- <parameter name="field1"\r
- value='Failed to Publish to DMaap' />\r
- </record>\r
- </outcome>\r
- </execute>\r
- <return status='failure'>\r
- <parameter name='status.code' value='401' />\r
- <parameter name='status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </return>\r
- </block>\r
- </outcome>\r
- <outcome value='Other'>\r
- <switch test="`$org.onap.appc.adapter.ansible.result.code`">\r
- <outcome value='101'>\r
- <block>\r
- <set>\r
- <parameter name='lcm-dmaap.version'\r
- value='`$prop.lcm.dmaap.version`' />\r
- <parameter name='lcm-dmaap.correlation-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.partition'\r
- value='`$prop.lcm.dmaap.partition`' />\r
- <parameter name='lcm-dmaap.rpc-name'\r
- value='upgrade-pre-check' />\r
- <parameter name='lcm-dmaap.type'\r
- value='`$prop.lcm.dmaap.type`' />\r
- <parameter name='lcm-dmaap.timestamp'\r
- value='`$upgrade-pre-check-input.common-header.timestamp`' />\r
- <parameter name='lcm-dmaap.api-ver'\r
- value='`$upgrade-pre-check-input.common-header.api-ver`' />\r
- <parameter name='lcm-dmaap.originator-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.request-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.sub-request-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.flags.mode'\r
- value='`$upgrade-pre-check-input.common-header.flags.mode`' />\r
- <parameter name='lcm-dmaap.flags.force'\r
- value='`$upgrade-pre-check-input.common-header.flags.force`' />\r
- <parameter name='lcm-dmaap.flags.ttl'\r
- value='`$upgrade-pre-check-input.common-header.flags.ttl`' />\r
- <parameter name='lcm-dmaap.payload'\r
- value='`$org.onap.appc.adapter.ansible.results`' />\r
- <parameter name='lcm-dmaap.status.code'\r
- value='`$org.onap.appc.adapter.ansible.result.code`' />\r
- <parameter name='lcm-dmaap.status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </set>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'\r
- method='sendRequest'>\r
- <parameter name='templateFileName'\r
- value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
- <parameter name='restapiUrl'\r
- value='`$prop.lcm.dmaap.url`' />\r
- <parameter name='restapiUser'\r
- value='`$prop.lcm.dmaap.user`' />\r
- <parameter name='restapiPassword'\r
- value='`$prop.lcm.dmaap.password`' />\r
- <parameter name='format' value='json' />\r
- <parameter name='httpMethod' value='POST' />\r
- <parameter name='contentType'\r
- value='application/json' />\r
- <parameter name="responsePrefix" value="lcm" />\r
- <outcome value='failure'>\r
- <record\r
- plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log" />\r
- <parameter name="field1"\r
- value='Failed to Publish to DMaap' />\r
- </record>\r
- </outcome>\r
- </execute>\r
- <return status='failure'>\r
- <parameter name='status.code' value='401' />\r
- <parameter name='status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </return>\r
- </block>\r
- </outcome>\r
- <outcome value='500'>\r
- <block>\r
- <set>\r
- <parameter name='lcm-dmaap.version'\r
- value='`$prop.lcm.dmaap.version`' />\r
- <parameter name='lcm-dmaap.correlation-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.partition'\r
- value='`$prop.lcm.dmaap.partition`' />\r
- <parameter name='lcm-dmaap.rpc-name'\r
- value='upgrade-pre-check' />\r
- <parameter name='lcm-dmaap.type'\r
- value='`$prop.lcm.dmaap.type`' />\r
- <parameter name='lcm-dmaap.timestamp'\r
- value='`$upgrade-pre-check-input.common-header.timestamp`' />\r
- <parameter name='lcm-dmaap.api-ver'\r
- value='`$upgrade-pre-check-input.common-header.api-ver`' />\r
- <parameter name='lcm-dmaap.originator-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.request-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.sub-request-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.flags.mode'\r
- value='`$upgrade-pre-check-input.common-header.flags.mode`' />\r
- <parameter name='lcm-dmaap.flags.force'\r
- value='`$upgrade-pre-check-input.common-header.flags.force`' />\r
- <parameter name='lcm-dmaap.flags.ttl'\r
- value='`$upgrade-pre-check-input.common-header.flags.ttl`' />\r
- <parameter name='lcm-dmaap.payload'\r
- value='`$org.onap.appc.adapter.ansible.results`' />\r
- <parameter name='lcm-dmaap.status.code'\r
- value='`$org.onap.appc.adapter.ansible.result.code`' />\r
- <parameter name='lcm-dmaap.status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </set>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'\r
- method='sendRequest'>\r
- <parameter name='templateFileName'\r
- value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
- <parameter name='restapiUrl'\r
- value='`$prop.lcm.dmaap.url`' />\r
- <parameter name='restapiUser'\r
- value='`$prop.lcm.dmaap.user`' />\r
- <parameter name='restapiPassword'\r
- value='`$prop.lcm.dmaap.password`' />\r
- <parameter name='format' value='json' />\r
- <parameter name='httpMethod' value='POST' />\r
- <parameter name='contentType'\r
- value='application/json' />\r
- <parameter name="responsePrefix" value="lcm" />\r
- <outcome value='failure'>\r
- <record\r
- plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log" />\r
- <parameter name="field1"\r
- value='Failed to Publish to DMaap' />\r
- </record>\r
- </outcome>\r
- </execute>\r
- <return status='failure'>\r
- <parameter name='status.code' value='401' />\r
- <parameter name='status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </return>\r
- </block>\r
- </outcome>\r
- <outcome value='100'>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'\r
- method='reqExecResult'>\r
- <parameter name='AgentUrl'\r
- value='`$prop.ansible.agenturl`' />\r
- <parameter name='User' value='`$prop.ansible.user`' />\r
- <parameter name='Password'\r
- value='`$prop.ansible.password`' />\r
- <parameter name='Id'\r
- value='`$org.onap.appc.adapter.ansible.Id`' />\r
- <parameter name='PlaybookName'\r
- value='`$prop.lcm.upgrade-pre-check.playbookname`' />\r
-\r
-\r
-\r
-\r
-\r
- <outcome value='failure'>\r
- <block>\r
- <set>\r
- <parameter name='lcm-dmaap.version'\r
- value='`$prop.lcm.dmaap.version`' />\r
- <parameter name='lcm-dmaap.correlation-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.partition'\r
- value='`$prop.lcm.dmaap.partition`' />\r
- <parameter name='lcm-dmaap.rpc-name'\r
- value='upgrade-pre-check' />\r
- <parameter name='lcm-dmaap.type'\r
- value='`$prop.lcm.dmaap.type`' />\r
- <parameter name='lcm-dmaap.timestamp'\r
- value='`$upgrade-pre-check-input.common-header.timestamp`' />\r
- <parameter name='lcm-dmaap.api-ver'\r
- value='`$upgrade-pre-check-input.common-header.api-ver`' />\r
- <parameter name='lcm-dmaap.originator-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.request-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.sub-request-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.flags.mode'\r
- value='`$upgrade-pre-check-input.common-header.flags.mode`' />\r
- <parameter name='lcm-dmaap.flags.force'\r
- value='`$upgrade-pre-check-input.common-header.flags.force`' />\r
- <parameter name='lcm-dmaap.flags.ttl'\r
- value='`$upgrade-pre-check-input.common-header.flags.ttl`' />\r
- <parameter name='lcm-dmaap.payload'\r
- value='`$org.onap.appc.adapter.ansible.results`' />\r
- <parameter name='lcm-dmaap.status.code'\r
- value='`$org.onap.appc.adapter.ansible.result.code`' />\r
- <parameter name='lcm-dmaap.status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </set>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'\r
- method='sendRequest'>\r
- <parameter name='templateFileName'\r
- value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
- <parameter name='restapiUrl'\r
- value='`$prop.lcm.dmaap.url`' />\r
- <parameter name='restapiUser'\r
- value='`$prop.lcm.dmaap.user`' />\r
- <parameter name='restapiPassword'\r
- value='`$prop.lcm.dmaap.password`' />\r
- <parameter name='format' value='json' />\r
- <parameter name='httpMethod' value='POST' />\r
- <parameter name='contentType'\r
- value='application/json' />\r
- <parameter name="responsePrefix" value="lcm" />\r
- <outcome value='failure'>\r
- <record\r
- plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log" />\r
- <parameter name="field1"\r
- value='Failed to Publish to DMaap' />\r
- </record>\r
- </outcome>\r
- </execute>\r
- <return status='failure'>\r
- <parameter name='status.code' value='401' />\r
- <parameter name='status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </return>\r
- </block>\r
- </outcome>\r
- <outcome value='success'>\r
- <block>\r
- <set>\r
- <parameter name='lcm-dmaap.version'\r
- value='`$prop.lcm.dmaap.version`' />\r
- <parameter name='lcm-dmaap.correlation-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.partition'\r
- value='`$prop.lcm.dmaap.partition`' />\r
- <parameter name='lcm-dmaap.rpc-name'\r
- value='upgrade-pre-check' />\r
- <parameter name='lcm-dmaap.type'\r
- value='`$prop.lcm.dmaap.type`' />\r
- <parameter name='lcm-dmaap.timestamp'\r
- value='`$upgrade-pre-check-input.common-header.timestamp`' />\r
- <parameter name='lcm-dmaap.api-ver'\r
- value='`$upgrade-pre-check-input.common-header.api-ver`' />\r
- <parameter name='lcm-dmaap.originator-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.request-id'\r
- value='`$upgrade-pre-check-input.common-header.originator-id`' />\r
- <parameter name='lcm-dmaap.sub-request-id'\r
- value='`$upgrade-pre-check-input.common-header.sub-request-id`' />\r
- <parameter name='lcm-dmaap.flags.mode'\r
- value='`$upgrade-pre-check-input.common-header.flags.mode`' />\r
- <parameter name='lcm-dmaap.flags.force'\r
- value='`$upgrade-pre-check-input.common-header.flags.force`' />\r
- <parameter name='lcm-dmaap.flags.ttl'\r
- value='`$upgrade-pre-check-input.common-header.flags.ttl`' />\r
- <parameter name='lcm-dmaap.payload'\r
- value='`$org.onap.appc.adapter.ansible.results`' />\r
- <parameter name='lcm-dmaap.status.code'\r
- value='`$org.onap.appc.adapter.ansible.result.code`' />\r
- <parameter name='lcm-dmaap.status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </set>\r
- <execute\r
- plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'\r
- method='sendRequest'>\r
- <parameter name='templateFileName'\r
- value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
- <parameter name='restapiUrl'\r
- value='`$prop.lcm.dmaap.url`' />\r
- <parameter name='restapiUser'\r
- value='`$prop.lcm.dmaap.user`' />\r
- <parameter name='restapiPassword'\r
- value='`$prop.lcm.dmaap.password`' />\r
- <parameter name='format' value='json' />\r
- <parameter name='httpMethod' value='POST' />\r
- <parameter name='contentType'\r
- value='application/json' />\r
- <parameter name="responsePrefix" value="lcm" />\r
- <outcome value='failure'>\r
- <record\r
- plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log" />\r
- <parameter name="field1"\r
- value='Failed to Publish to DMaap' />\r
- </record>\r
- </outcome>\r
- </execute>\r
- <return status='success'>\r
- <parameter name='status.code'\r
- value='`$org.onap.appc.adapter.ansible.result.code`' />\r
- <parameter name='status.message'\r
- value='`$org.onap.appc.adapter.ansible.message`' />\r
- </return>\r
- </block>\r
- </outcome>\r
- </execute>\r
- </outcome>\r
- </switch>\r
- </outcome>\r
- </execute>\r
- </block>\r
- </method>\r
+<service-logic\r
+ xmlns='http://www.onap.org/sdnc/svclogic'\r
+ xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='LCM' version='${project.version}'>\r
+ <method rpc='upgrade-pre-check' mode='sync'>\r
+ <block>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode' method='readProperties' >\r
+ <parameter name='fileName' value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />\r
+ <parameter name='contextPrefix' value='prop' />\r
+ </execute>\r
+ <set>\r
+ <parameter name='status.code' value='200' />\r
+ <parameter name='status.message' value='unexpected return from DG' />\r
+ </set>\r
+ <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExec' >\r
+ <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>\r
+ <parameter name='User' value='`$prop.ansible.user`'/>\r
+ <parameter name='Password' value='`prop.ansible.password`'/>\r
+ <parameter name='LocalParameters' value='`$prop.ansible.lcm.localparameters`'/>\r
+ <parameter name='EnvParameters' value='`$upgrade-pre-check-input.payload`'/>\r
+ <parameter name='NodeList' value='`$prop.ansible.nodelist`'/>\r
+ <parameter name='Timeout' value='`$prop.ansible.timeout`'/>\r
+ <parameter name='Version' value='`$prop.ansible.version`'/>\r
+ <parameter name='Id' value='`$upgrade-pre-check-input.common-header.request-id`'/>\r
+ <parameter name='PlaybookName' value='`$prop.lcm.upgrade-pre-check.playbookname`'/>\r
+ <outcome value='not-found'>\r
+ <block>\r
+ <set>\r
+ <parameter name='org.onap.appc.adapter.ansible.result.code' value='401'/>\r
+ <parameter name='org.onap.appc.adapter.ansible.message' value='Ansible Adapter was not found'/>\r
+ </set>\r
+ <block>\r
+ <set>\r
+ <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>\r
+ <parameter name='lcm-dmaap.correlation-id' value="`$upgrade-pre-check-input.common-header.request-id + '-' + $upgrade-pre-check-input.common-header.sub-request-id`"/>\r
+ <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>\r
+ <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>\r
+ <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>\r
+ <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>\r
+ <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>\r
+ <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>\r
+ <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.request-id`'/>\r
+ <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>\r
+ <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>\r
+ <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>\r
+ <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>\r
+ <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>\r
+ <parameter name='lcm-dmaap.status.code' value='`$org.onap.appc.adapter.ansible.result.code`' />\r
+ <parameter name='lcm-dmaap.status.message' value='`$org.onap.appc.adapter.ansible.message`'/>\r
+ </set>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >\r
+ <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
+ <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />\r
+ <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />\r
+ <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />\r
+ <parameter name='format' value='json' />\r
+ <parameter name='httpMethod' value='POST' />\r
+ <parameter name='contentType' value='application/json' />\r
+ <parameter name="responsePrefix" value="lcm" />\r
+ <outcome value='failure'>\r
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
+ <parameter name="logger" value="message-log"/>\r
+ <parameter name="field1" value='Failed to Publish to DMaap'/>\r
+ </record>\r
+ </outcome>\r
+ </execute>\r
+ <return status='failure'>\r
+ <parameter name='status.code' value='401' />\r
+ <parameter name='status.message' value='`$org.onap.appc.adapter.ansible.message`' />\r
+ </return>\r
+ </block>\r
+ </block>\r
+ </outcome>\r
+ <outcome value='failure'>\r
+ <block>\r
+ <set>\r
+ <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>\r
+ <parameter name='lcm-dmaap.correlation-id' value="`$upgrade-pre-check-input.common-header.request-id + '-' + $upgrade-pre-check-input.common-header.sub-request-id`"/>\r
+ <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>\r
+ <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>\r
+ <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>\r
+ <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>\r
+ <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>\r
+ <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>\r
+ <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.request-id`'/>\r
+ <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>\r
+ <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>\r
+ <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>\r
+ <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>\r
+ <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>\r
+ <parameter name='lcm-dmaap.status.code' value='`$org.onap.appc.adapter.ansible.result.code`' />\r
+ <parameter name='lcm-dmaap.status.message' value='`$org.onap.appc.adapter.ansible.message`'/>\r
+ </set>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >\r
+ <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
+ <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />\r
+ <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />\r
+ <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />\r
+ <parameter name='format' value='json' />\r
+ <parameter name='httpMethod' value='POST' />\r
+ <parameter name='contentType' value='application/json' />\r
+ <parameter name="responsePrefix" value="lcm" />\r
+ <outcome value='failure'>\r
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
+ <parameter name="logger" value="message-log"/>\r
+ <parameter name="field1" value='Failed to Publish to DMaap'/>\r
+ </record>\r
+ </outcome>\r
+ </execute>\r
+ <return status='failure'>\r
+ <parameter name='status.code' value='401' />\r
+ <parameter name='status.message' value='`$org.onap.appc.adapter.ansible.message`' />\r
+ </return>\r
+ </block>\r
+ </outcome>\r
+ <outcome value='Other'>\r
+ <switch test="`$org.onap.appc.adapter.ansible.result.code`">\r
+ <outcome value='101'>\r
+ <block>\r
+ <set>\r
+ <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>\r
+ <parameter name='lcm-dmaap.correlation-id' value="`$upgrade-pre-check-input.common-header.request-id + '-' + $upgrade-pre-check-input.common-header.sub-request-id`"/>\r
+ <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>\r
+ <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>\r
+ <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>\r
+ <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>\r
+ <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>\r
+ <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>\r
+ <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.request-id`'/>\r
+ <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>\r
+ <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>\r
+ <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>\r
+ <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>\r
+ <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>\r
+ <parameter name='lcm-dmaap.status.code' value='`$org.onap.appc.adapter.ansible.result.code`' />\r
+ <parameter name='lcm-dmaap.status.message' value='`$org.onap.appc.adapter.ansible.message`'/>\r
+ </set>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >\r
+ <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
+ <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />\r
+ <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />\r
+ <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />\r
+ <parameter name='format' value='json' />\r
+ <parameter name='httpMethod' value='POST' />\r
+ <parameter name='contentType' value='application/json' />\r
+ <parameter name="responsePrefix" value="lcm" />\r
+ <outcome value='failure'>\r
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
+ <parameter name="logger" value="message-log"/>\r
+ <parameter name="field1" value='Failed to Publish to DMaap'/>\r
+ </record>\r
+ </outcome>\r
+ </execute>\r
+ <return status='failure'>\r
+ <parameter name='status.code' value='401' />\r
+ <parameter name='status.message' value='`$org.onap.appc.adapter.ansible.message`' />\r
+ </return>\r
+ </block>\r
+ </outcome>\r
+ <outcome value='500'>\r
+ <block>\r
+ <set>\r
+ <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>\r
+ <parameter name='lcm-dmaap.correlation-id' value="`$upgrade-pre-check-input.common-header.request-id + '-' + $upgrade-pre-check-input.common-header.sub-request-id`"/>\r
+ <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>\r
+ <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>\r
+ <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>\r
+ <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>\r
+ <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>\r
+ <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>\r
+ <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.request-id`'/>\r
+ <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>\r
+ <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>\r
+ <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>\r
+ <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>\r
+ <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>\r
+ <parameter name='lcm-dmaap.status.code' value='`$org.onap.appc.adapter.ansible.result.code`' />\r
+ <parameter name='lcm-dmaap.status.message' value='`$org.onap.appc.adapter.ansible.message`'/>\r
+ </set>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >\r
+ <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
+ <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />\r
+ <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />\r
+ <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />\r
+ <parameter name='format' value='json' />\r
+ <parameter name='httpMethod' value='POST' />\r
+ <parameter name='contentType' value='application/json' />\r
+ <parameter name="responsePrefix" value="lcm" />\r
+ <outcome value='failure'>\r
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
+ <parameter name="logger" value="message-log"/>\r
+ <parameter name="field1" value='Failed to Publish to DMaap'/>\r
+ </record>\r
+ </outcome>\r
+ </execute>\r
+ <return status='failure'>\r
+ <parameter name='status.code' value='401' />\r
+ <parameter name='status.message' value='`$org.onap.appc.adapter.ansible.message`' />\r
+ </return>\r
+ </block>\r
+ </outcome>\r
+ <outcome value='100'>\r
+ <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExecResult' >\r
+ <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>\r
+ <parameter name='User' value='`$prop.ansible.user`'/>\r
+ <parameter name='Password' value='`$prop.ansible.password`'/>\r
+ <parameter name='Id' value='`$org.onap.appc.adapter.ansible.Id`'/>\r
+ <parameter name='PlaybookName' value='`$prop.lcm.upgrade-pre-check.playbookname`'/>\r
+ <outcome value='failure'>\r
+ <block>\r
+ <set>\r
+ <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>\r
+ <parameter name='lcm-dmaap.correlation-id' value="`$upgrade-pre-check-input.common-header.request-id + '-' + $upgrade-pre-check-input.common-header.sub-request-id`"/>\r
+ <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>\r
+ <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>\r
+ <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>\r
+ <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>\r
+ <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>\r
+ <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>\r
+ <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.request-id`'/>\r
+ <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>\r
+ <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>\r
+ <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>\r
+ <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>\r
+ <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>\r
+ <parameter name='lcm-dmaap.status.code' value='`$org.onap.appc.adapter.ansible.result.code`' />\r
+ <parameter name='lcm-dmaap.status.message' value='`$org.onap.appc.adapter.ansible.message`'/>\r
+ </set>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >\r
+ <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
+ <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />\r
+ <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />\r
+ <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />\r
+ <parameter name='format' value='json' />\r
+ <parameter name='httpMethod' value='POST' />\r
+ <parameter name='contentType' value='application/json' />\r
+ <parameter name="responsePrefix" value="lcm" />\r
+ <outcome value='failure'>\r
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
+ <parameter name="logger" value="message-log"/>\r
+ <parameter name="field1" value='Failed to Publish to DMaap'/>\r
+ </record>\r
+ </outcome>\r
+ </execute>\r
+ <return status='failure'>\r
+ <parameter name='status.code' value='401' />\r
+ <parameter name='status.message' value='`$org.onap.appc.adapter.ansible.message`' />\r
+ </return>\r
+ </block>\r
+ </outcome>\r
+ <outcome value='success'>\r
+ <block>\r
+ <set>\r
+ <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>\r
+ <parameter name='lcm-dmaap.correlation-id' value="`$upgrade-pre-check-input.common-header.request-id + '-' + $upgrade-pre-check-input.common-header.sub-request-id`"/>\r
+ <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>\r
+ <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>\r
+ <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>\r
+ <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>\r
+ <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>\r
+ <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>\r
+ <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.request-id`'/>\r
+ <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>\r
+ <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>\r
+ <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>\r
+ <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>\r
+ <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>\r
+ <parameter name='lcm-dmaap.status.code' value='`$org.onap.appc.adapter.ansible.result.code`' />\r
+ <parameter name='lcm-dmaap.status.message' value='`$org.onap.appc.adapter.ansible.message`'/>\r
+ </set>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >\r
+ <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />\r
+ <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />\r
+ <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />\r
+ <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />\r
+ <parameter name='format' value='json' />\r
+ <parameter name='httpMethod' value='POST' />\r
+ <parameter name='contentType' value='application/json' />\r
+ <parameter name="responsePrefix" value="lcm" />\r
+ <outcome value='failure'>\r
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
+ <parameter name="logger" value="message-log"/>\r
+ <parameter name="field1" value='Failed to Publish to DMaap'/>\r
+ </record>\r
+ </outcome>\r
+ </execute>\r
+ <return status='success'>\r
+ <parameter name='status.code' value='`$org.onap.appc.adapter.ansible.result.code`' />\r
+ <parameter name='status.message' value='`$org.onap.appc.adapter.ansible.message`'/>\r
+ </return>\r
+ </block>\r
+ </outcome>\r
+ </execute>\r
+ </outcome>\r
+ </switch>\r
+ </outcome>\r
+ </execute>\r
+ </block>\r
+ </method>\r
</service-logic>
\ No newline at end of file
Code Review / sdnc / oam.git / blobdiff