.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 Distribution User Manual ************************ .. contents:: :depth: 3 Installation ^^^^^^^^^^^^ Requirements ------------ .. container:: paragraph Distribution is 100% written in Java and runs on any platform that supports a JVM, e.g. Windows, Unix, Cygwin. Installation Requirements ######################### .. container:: ulist - Downloaded distribution: JAVA runtime environment (JRE, Java 8 or later, Distribution is tested with the OpenJDK) - Building from source: JAVA development kit (JDK, Java 8 or later, Distribution is tested with the OpenJDK) - Sufficient rights to install Distribution on the system - Installation tools .. container:: ulist - TAR and GZ to extract from that TAR.GZ distribution .. container:: ulist - Windows for instance `7Zip `__ - `Docker `__ to run Distribution inside a Docker container Build (Install from Source) Requirements ######################################## .. container:: paragraph Installation from source requires a few development tools .. container:: ulist - GIT to retrieve the source code - Java SDK, Java version 8 or later - Apache Maven 3 (the Distribution build environment) Get the Distribution Source Code -------------------------------- .. container:: paragraph The Distribution source code is hosted in ONAP as project distribution. The current stable version is in the master branch. Simply clone the master branch from ONAP using HTTPS. .. container:: listingblock .. container:: content .. code:: text git clone https://gerrit.onap.org/r/policy/distribution Build Distribution ------------------ .. container:: paragraph The examples in this document assume that the distribution source repositories are cloned to: .. container:: ulist - Unix, Cygwin: ``/usr/local/src/distribution`` - Windows: ``C:\dev\distribution`` - Cygwin: ``/cygdrive/c/dev/distribution`` .. important:: A Build requires ONAP Nexus Distribution has a dependency to ONAP parent projects. You might need to adjust your Maven M2 settings. The most current settings can be found in the ONAP oparent repo: `Settings `__. .. important:: A Build needs Space Building distribution requires approximately 1-2 GB of hard disc space, 100 MB for the actual build with full distribution and around 1 GB for the downloaded dependencies. .. important:: A Build requires Internet (for first build) During the build, several (a lot) of Maven dependencies will be downloaded and stored in the configured local Maven repository. The first standard build (and any first specific build) requires Internet access to download those dependencies. .. container:: paragraph Use Maven for a standard build without any tests. +-------------------------------------------------------+--------------------------------------------------------+ | Unix, Cygwin | Windows | +=======================================================+========================================================+ | .. container:: | .. container:: | | | | | .. container:: content | .. container:: content | | | | | .. code:: text | .. code:: text | | | | | # cd /usr/local/src/distribution | >c: | | # mvn clean install -DskipTest | >cd \dev\distribution | | | >mvn clean install -DskipTests | +-------------------------------------------------------+--------------------------------------------------------+ .. container:: paragraph The build takes 2-3 minutes on a standard development laptop. It should run through without errors, but with a lot of messages from the build process. | .. container:: paragraph When Maven is finished with the build, the final screen should look similar to this (omitting some ``success`` lines): .. container:: listingblock .. container:: content .. code:: text [INFO] ------------------------------------------------------------------------ [INFO] Reactor Summary: [INFO] [INFO] policy-distribution ................................ SUCCESS [ 3.666 s] [INFO] distribution-model ................................. SUCCESS [ 11.234 s] [INFO] forwarding ......................................... SUCCESS [ 7.611 s] [INFO] reception .......................................... SUCCESS [ 7.072 s] [INFO] main ............................................... SUCCESS [ 21.017 s] [INFO] plugins ............................................ SUCCESS [ 0.453 s] [INFO] forwarding-plugins ................................. SUCCESS [01:20 min] [INFO] reception-plugins .................................. SUCCESS [ 18.545 s] [INFO] Policy Distribution Packages ....................... SUCCESS [ 0.419 s] [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESS [INFO] ------------------------------------------------------------------------ [INFO] Total time: 02:39 min [INFO] Finished at: 2018-11-15T13:59:09Z [INFO] Final Memory: 73M/1207M [INFO] ------------------------------------------------------------------------ .. container:: paragraph The build will have created all artifacts required for distribution installation. The following example show how to change to the target directory and how it should look. +----------------------------------------------------------------------------------------------------------------------------+ | Unix, Cygwin | +============================================================================================================================+ | .. container:: | | | | .. container:: listingblock | | | | .. container:: content | | | | .. code:: text | | | | -rw-r--r-- 1 user 1049089 10616 Oct 31 13:35 checkstyle-checker.xml | | -rw-r--r-- 1 user 1049089 609 Oct 31 13:35 checkstyle-header.txt | | -rw-r--r-- 1 user 1049089 245 Oct 31 13:35 checkstyle-result.xml | | -rw-r--r-- 1 user 1049089 89 Oct 31 13:35 checkstyle-cachefile | | drwxr-xr-x 1 user 1049089 0 Oct 31 13:35 maven-archiver/ | | -rw-r--r-- 1 user 1049089 7171 Oct 31 13:35 policy-distribution-tarball-2.0.1-SNAPSHOT.jar | | drwxr-xr-x 1 user 1049089 0 Oct 31 13:35 archive-tmp/ | | -rw-r--r-- 1 user 1049089 66296012 Oct 31 13:35 policy-distribution-tarball-2.0.1-SNAPSHOT-tarball.tar.gz | | drwxr-xr-x 1 user 1049089 0 Nov 12 10:56 test-classes/ | | drwxr-xr-x 1 user 1049089 0 Nov 20 14:31 classes/ | +----------------------------------------------------------------------------------------------------------------------------+ +-------------------------------------------------------------------------------------------------------------------+ | Windows | +===================================================================================================================+ | .. container:: | | | | .. container:: listingblock | | | | .. container:: content | | | | .. code:: text | | | | 11/12/2018 10:56 AM . | | 11/12/2018 10:56 AM .. | | 10/31/2018 01:35 PM archive-tmp | | 10/31/2018 01:35 PM 89 checkstyle-cachefile | | 10/31/2018 01:35 PM 10,616 checkstyle-checker.xml | | 10/31/2018 01:35 PM 609 checkstyle-header.txt | | 10/31/2018 01:35 PM 245 checkstyle-result.xml | | 11/20/2018 02:31 PM classes | | 10/31/2018 01:35 PM maven-archiver | | 10/31/2018 01:35 PM 66,296,012 policy-distribution-tarball-2.0.1-SNAPSHOT-tarball.tar.gz | | 10/31/2018 01:35 PM 7,171 policy-distribution-tarball-2.0.1-SNAPSHOT.jar | | 11/12/2018 10:56 AM test-classes | +-------------------------------------------------------------------------------------------------------------------+ Install Distribution -------------------- .. container:: paragraph Distribution can be installed in different ways: .. container:: ulist - Windows, Unix, Cygwin: manually from a ``.tar.gz`` archive - Windows, Unix, Cygwin: build from source using Maven, then install manually Install Manually from Archive (Windows, 7Zip, GUI) ################################################## .. container:: paragraph Download a ``tar.gz`` archive and copy the file into the install folder (in this example ``C:\distribution``). Assuming you are using 7Zip, right click on the file and extract the ``tar`` archive. | .. container:: content Extract the TAR archive .. container:: paragraph Then right-click on the new created TAR file and extract the actual distribution. | .. container:: content Extract the distribution .. container:: paragraph Inside the new distribution folder you see the main directories: ``bin``, ``etc``and ``lib`` | .. container:: paragraph Once extracted, please rename the created folder to ``distribution-full-2.0.2-SNAPSHOT``. This will keep the directory name in line with the rest of this documentation. Build from Source ----------------- Build and Install Manually (Unix, Windows, Cygwin) ################################################## .. container:: paragraph Clone the Distribution GIT repositories into a directory. Go to that directory. Use Maven to build Distribution (all details on building Distribution from source can be found in *Distribution HowTo: Build*). .. container:: paragraph Now, take the ``.tar.gz`` file and install distribution. Installation Layout ------------------- .. container:: paragraph A full installation of distribution comes with the following layout. .. container:: listingblock .. container:: content - bin - etc - lib Running Distribution in Docker ------------------------------ Run in ONAP ########### .. container:: paragraph Running distribution from the ONAP docker repository only requires 2 commands: .. container:: olist arabic #. Log into the ONAP docker repo .. container:: listingblock .. container:: content :: docker login -u docker -p docker nexus3.onap.org:10003 .. container:: olist arabic #. Run the distribution docker image .. container:: listingblock .. container:: content :: docker run -it --rm nexus3.onap.org:10003/onap/policy-distribution:latest Build a Docker Image #################### .. container:: paragraph Alternatively, one can use the Dockerfile defined in the Docker package to build an image. Distribution Configurations Explained ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Introduction to Distribution Configuration ------------------------------------------ .. container:: paragraph A distribution engine can be configured to use various combinations of policy reception handlers, policy decoders and policy forwarders. The system is built using a plugin architecture. Each configuration option is realized by a plugin, which can be loaded and configured when the engine is started. New plugins can be added to the system at any time, though to benefit from a new plugin, an engine will need to be restarted. | .. container:: paragraph The distribution already comes with sdc reception handler, file reception handler, xacml policy decoder, file in csar policy decoder, xacml policy forwarder, apex policy forwarder. General Configuration Format ---------------------------- .. container:: paragraph The distribution configuration file is a JSON file containing a few main blocks for different parts of the configuration. Each block then holds the configuration details. The following code shows the main blocks: .. container:: listingblock .. container:: content .. code:: text { "restServerParameters":{ ... (1) }, "receptionHandlerParameters":{ (2) "pluginHandlerParameters":{ (3) "policyDecoders":{...}, (4) "policyForwarders":{...} (5) } }, "receptionHandlerConfigurationParameters":{ ... (6) } , "policyForwarderConfigurationParameters":{ ... (7) } , "policyDecoderConfigurationParameters":{ ... (8) } } .. container:: colist arabic +-----------------------------------+-----------------------------------+ | **1** | rest server configuration | +-----------------------------------+-----------------------------------+ | **2** | reception handler plugin | | | configurations | +-----------------------------------+-----------------------------------+ | **3** | plugin handler parameters | | | configuration | +-----------------------------------+-----------------------------------+ | **4** | policy decoder plugin | | | configuration | +-----------------------------------+-----------------------------------+ | **5** | policy forwarder plugin | | | configuration | +-----------------------------------+-----------------------------------+ | **6** | reception handler plugin | | | parameters | +-----------------------------------+-----------------------------------+ | **7** | policy forwarder plugin | | | parameters | +-----------------------------------+-----------------------------------+ | **8** | policy decoder plugin | | | parameters | +-----------------------------------+-----------------------------------+ A configuration example ----------------------- .. container:: paragraph The following example loads HPA use case related plug-ins. .. container:: paragraph Notifications are consumed from SDC through SDC client. Consumed artifacts format is CSAR. .. container:: paragraph Generated policies are forwarded to XACML policy engine. .. container:: listingblock .. container:: content .. code:: text { "name":"SDCDistributionGroup", "restServerParameters":{ "host":"0.0.0.0", "port":6969, "userName":"healthcheck", "password":"zb!XztG34" }, "receptionHandlerParameters":{ "SDCReceptionHandler":{ "receptionHandlerType":"SDC", "receptionHandlerClassName":"org.onap.policy.distribution.reception.handling.sdc.SdcReceptionHandler", "receptionHandlerConfigurationName":"sdcConfiguration", "pluginHandlerParameters":{ "policyDecoders":{ "CsarDecoder":{ "decoderType":"CsarDecoder", "decoderClassName":"org.onap.policy.distribution.reception.decoding.pdpx.PolicyDecoderCsarPdpx", "decoderConfigurationName": "csarToOptimizationPolicyConfiguration" } }, "policyForwarders":{ "PAPEngineForwarder":{ "forwarderType":"PAPEngine", "forwarderClassName":"org.onap.policy.distribution.forwarding.xacml.pdp.XacmlPdpPolicyForwarder", "forwarderConfigurationName": "xacmlPdpConfiguration" } } } } }, "receptionHandlerConfigurationParameters":{ "sdcConfiguration":{ "parameterClassName":"org.onap.policy.distribution.reception.handling.sdc.SdcReceptionHandlerConfigurationParameterGroup", "parameters":{ "asdcAddress": "sdc-be.onap:8443", "messageBusAddress": [ "message-router.onap" ], "user": "policy", "password": "Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U", "pollingInterval":20, "pollingTimeout":30, "consumerId": "policy-id", "artifactTypes": [ "TOSCA_CSAR", "HEAT" ], "consumerGroup": "policy-group", "environmentName": "AUTO", "keystorePath": "null", "keystorePassword": "null", "activeserverTlsAuth": false, "isFilterinEmptyResources": true, "isUseHttpsWithDmaap": false } } }, "policyDecoderConfigurationParameters":{ "csarToOptimizationPolicyConfiguration":{ "parameterClassName":"org.onap.policy.distribution.reception.decoding.pdpx.PolicyDecoderCsarPdpxConfigurationParameterGroup", "parameters":{ "policyNamePrefix": "oofCasablanca", "onapName": "OOF", "version": "1.0", "priority": "3", "riskType": "Test", "riskLevel": "2" } } }, "policyForwarderConfigurationParameters":{ "xacmlPdpConfiguration":{ "parameterClassName":"org.onap.policy.distribution.forwarding.xacml.pdp.XacmlPdpPolicyForwarderParameterGroup", "parameters":{ "useHttps": false, "hostname": "pdp", "port": 8081, "userName": "testpdp", "password": "alpha123", "clientAuth": "cHl0aG9uOnRlc3Q=", "isManaged": true, "pdpGroup": "pdpGroup" } } } } The Distribution Engine ^^^^^^^^^^^^^^^^^^^^^^^ .. container:: paragraph The Distribution engine can be started using ``policy-dist.sh`` script. The script is located in the source code at *distribution/packages/policy-distribution-docker/src/main/docker* directory | .. container:: paragraph On UNIX and Cygwin systems use ``policy-dist.sh`` script. | .. container:: paragraph On Windows systems navigate to the distribution installation directory. Run the following command ``java -cp "etc:lib\*" org.onap.policy.distribution.main.startstop.Main -c `` | .. container:: paragraph The Distribution engine comes with CLI arguments for setting configuration. The configuration file is always required. The option ``-h`` prints a help screen. .. container:: listingblock .. container:: content .. code:: text usage: org.onap.policy.distribution.main.startstop.Main [options...] options -c,--config-file the full path to the configuration file to use, the configuration file must be a Json file containing the distribution configuration parameters -h,--help outputs the usage of this command -v,--version outputs the version of distribution system The Distribution REST End-points ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. container:: paragraph The distribution engine comes with built-in REST based endpoints for fetching health check status & statistical data of running distribution system. .. container:: listingblock .. container:: content .. code:: text # Example Output from curl http -a '{user}:{password}' :6969/healthcheck HTTP/1.1 200 OK Content-Length: XXX Content-Type: application/json Date: Tue, 17 Apr 2018 10:51:14 GMT Server: Jetty(9.3.20.v20170531) { "code":200, "healthy":true, "message":"alive", "name":"Policy SSD", "url":"self" } # Example Output from curl http -a '{user}:{password}' :6969/statistics HTTP/1.1 200 OK Content-Length: XXX Content-Type: application/json Date: Tue, 17 Apr 2018 10:51:14 GMT Server: Jetty(9.3.20.v20170531) { "code":200, "distributions":10, "distribution_complete_ok":8, "distribution_complete_fail":2, "downloads":15, "downloads_ok"; 10, "downloads_error": 5 }