.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
-Installation
-------------
+Standalone Quick Start Installation
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. contents::
- :depth: 3
+ :depth: 2
The installation of ONAP Policy is **automated** by design and can be done via Docker as a standalone system.
Various tools, including healthcheck, logs, and Swagger can be used to ensure proper operation.
-ONAP Policy Framework: Standalone Quick Start
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-This procedure explains how build the ONAP Policy Framework and get it running in Docker as a standalone system.
-This procedure assumes that:
+This article explains how to build the ONAP Policy Framework and get it running in Docker as a standalone system.
+This article assumes that:
* You are using a *\*nix* operating system such as linux or macOS.
* You are using a directory called *git* off your home directory *(~/git)* for your git repositories
* Your local maven repository is in the location *~/.m2/repository*
+* You have added settings to access the ONAP Nexus to your M2 configuration, see `Maven Settings Example <https://wiki.onap.org/display/DW/Setting+Up+Your+Development+Environment>`_ (bottom of the linked page)
-The procedure documented here has been verified to work on a MacBook laptop running macOS Sierra Version 10.12.6 and a HP Z600 desktop running Ubuntu 16.04.3 LTS.
+The procedure documented in this article has been verified to work on a MacBook laptop running macOS Sierra Version 10.12.6 and a HP Z600 desktop running Ubuntu 16.04.3 LTS.
+Cloning the ONAP repositories
+-----------------------------
-**Typical ONAP Policy Framework Clone Script**
+Run a script such as the script below to clone the required modules from the `ONAP git repository <https://gerrit.onap.org/r/#/admin/projects/?filter=policy>`_. This script clones the ONAP policy code and also clones some modules that ONAP Policy is dependent on.
-.. code-block:: none
+ONAP Policy requires all the *policy* modules from the ONAP repository. It also requires the ONAP Parent *oparent* module and the ONAP ECOMP SDK *ecompsdkos* module.
+
+
+.. code-block:: bash
+ :caption: Typical ONAP Policy Framework Clone Script
+ :linenos:
#!/usr/bin/env bash
-
+
## script name for output
MOD_SCRIPT_NAME=`basename $0`
-
+
## the ONAP clone directory, defaults to "onap"
clone_dir="onap"
-
+
## the ONAP repos to clone
onap_repos="\
- oparent \
- ecompsdkos \
policy/api \
policy/common \
policy/docker \
policy/gui \
policy/pap \
policy/pdp"
-
+
##
## Help screen and exit condition (i.e. too few arguments)
##
echo ""
exit 255;
}
-
+
##
## read command line
##
clone_dir=$1
shift
;;
-
+
#-h prints help and exists
-h)
Help;exit 0;;
-
+
*) echo "$MOD_SCRIPT_NAME: undefined CLI option - $1"; exit 255;;
esac
done
-
+
if [ -f "$clone_dir" ]; then
echo "$MOD_SCRIPT_NAME: requested clone directory '$clone_dir' exists as file"
exit 2
echo "$MOD_SCRIPT_NAME: requested clone directory '$clone_dir' exists as directory"
exit 2
fi
-
+
mkdir $clone_dir
if [ $? != 0 ]
then
echo cannot clone ONAP repositories, could not create directory '"'$clone_dir'"'
exit 3
fi
-
+
for repo in $onap_repos
do
repoDir=`dirname "$repo"`
repoName=`basename "$repo"`
-
+
if [ ! -z $dirName ]
then
- mkdir "$clone_dir/$repoDir"
- if [ $? != 0 ]
- then
- echo cannot clone ONAP repositories, could not create directory '"'$clone_dir/repoDir'"'
- exit 4
+ mkdir "$clone_dir/$repoDir"
+ if [ $? != 0 ]
+ then
+ echo cannot clone ONAP repositories, could not create directory '"'$clone_dir/repoDir'"'
+ exit 4
+ fi
fi
- fi
-
+
git clone https://gerrit.onap.org/r/${repo} $clone_dir/$repo
done
-
+
echo ONAP has been cloned into '"'$clone_dir'"'
+
Execution of the script above results in the following directory hierarchy in your *~/git* directory:
* ~/git/onap
- * ~/git/onap/ecompsdkos
- * ~/git/onap/oparent
* ~/git/onap/policy
* ~/git/onap/policy/api
* ~/git/onap/policy/common
* ~/git/onap/policy/pdp
-
Building ONAP
-^^^^^^^^^^^^^
+-------------
-**Step 1.** Optionally, for a completely clean build, remove the ONAP built modules from your local repository.
+**Step 1:** Optionally, for a completely clean build, remove the ONAP built modules from your local repository.
- * rm -fr ~/.m2/repository/org/onap
- * rm -fr ~/.m2/repository/org/openecomp
+ .. code-block:: bash
+
+ rm -fr ~/.m2/repository/org/onap
+ rm -fr ~/.m2/repository/org/openecomp
+ rm -fr ~/.m2/repisotory/com/att
-**Step 2**. A pom such as the one below can be used to build all the ONAP policy modules and their dependencies. Create the *pom.xml* file in the directory *~/git/onap*.
-**Typical pom.xml to build the ONAP Policy Framework**
+**Step 2:** A pom such as the one below can be used to build the ONAP Policy Framework modules. Create the *pom.xml* file in the directory *~/git/onap/policy*.
-.. code-block:: none
-
- <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
- <modelVersion>4.0.0</modelVersion>
- <groupId>org.onap</groupId>
- <artifactId>onap-policy_standalone</artifactId>
- <version>1.0.0-SNAPSHOT</version>
- <packaging>pom</packaging>
- <name>${project.artifactId}</name>
- <inceptionYear>2017</inceptionYear>
- <organization>
- <name>ONAP</name>
- </organization>
-
- <profiles>
- <profile>
- <id>policy-dependencies</id>
- <activation>
- <property>
- <name>policyDeps</name>
- </property>
- </activation>
- <modules>
- <module>oparent</module>
- <module>ecompsdkos/ecomp-sdk</module>
- </modules>
- </profile>
- <profile>
- <id>policy</id>
- <activation>
- <activeByDefault>true</activeByDefault>
- </activation>
- <modules>
- <module>oparent</module>
- <module>ecompsdkos/ecomp-sdk</module>
- <module>policy</module>
- </modules>
- </profile>
- </profiles>
- </project>
-
-
-
-**Step 3**. A pom such as the one below can be used to build the ONAP Policy Framework modules. Create the *pom.xml* file in the directory *~/git/onap/policy*
-
-**Typical pom.xml to build the ONAP Policy Framework Policy Modules**
-
-.. code-block:: none
+.. code-block:: xml
+ :caption: Typical pom.xml to build the ONAP Policy Framework
+ :linenos:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<organization>
<name>ONAP</name>
</organization>
-
+
<modules>
<module>common</module>
<module>engine</module>
</modules>
</project>
-**Step 4**. The build cannot currently find the *org.onap.oparent:version-check-maven-plugin* plugin so, for now, comment that plugin out in the POMs *policy/drools-pdp/pom.xml* and *policy/drools-applications/pom.xml*.
-**Step 5**. Build the ONAP dependencies that are required for the ONAP policy framework and which must be built first to be available to the ONAP Policy Framework proper.
+**Step 3:** You can now build the ONAP framework
- * cd ~/git/onap
- * mvn clean install -DpolicyDeps
+ .. code-block:: bash
-**Step 6**. You can now build the ONAP framework
-
- * On *Ubuntu*, just build the Policy Framework tests and all
-
- - cd ~/git/onap
- - mvn clean install
-
- * On *macOS*, you must build build the ONAP framework with tests turned off first. Then rebuild the framework with tests turned on and all tests will pass. Note: The reason for this behaviour will be explored later.
-
- - cd ~/git/onap
- - mvn clean install -DskipTests
- - mvn install
+ cd ~/git/onap
+ mvn clean install
Building the ONAP Policy Framework Docker Images
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-The instructions here are based on the instructions in the file *~/git/onap/policy/docker/README*.
+------------------------------------------------
+The instructions here are based on the instructions in the file *~/git/onap/policy/docker/README.md*.
+
-**Step 1.** Prepare the Docker packages. This will pull the installation zip files needed for building the policy-pe and policy-drools Docker images into the target directory. It will not actually build the docker images; the additional steps below must be followed to actually build the Docker images.
+**Step 1:** Build the policy engine docker image:
- * cd ~/git/onap/policy/docker
- * mvn prepare-package
+ .. code-block:: bash
-**Step 2**. Copy the files under *policy-pe* to *target/policy-pe*.
+ cd ~/git/onap/policy/engine/packages/docker/target
+ docker build -t onap/policy-pe policy-pe
- * cp policy-pe/* target/policy-pe
-**Step 3**. Copy the files under *policy-drools* to *target/policy-drools*.
+**Step 2:** Build the Drools PDP docker image:
- * cp policy-drools/* target/policy-drools
+ .. code-block:: bash
-**Step 4**. Run the *docker build* command on the following directories in the order below.
-Note that on some systems you may have to run the *docker* command as root or using *sudo*.
+ cd ~/git/onap/policy/drools-pdp/packages/docker/target
+ docker build -t onap/policy-drools policy-drools
- * docker build -t onap/policy/policy-os policy-os
- * docker build -t onap/policy/policy-db policy-db
- * docker build -t onap/policy/policy-nexus policy-nexus
- * docker build -t onap/policy/policy-base policy-base
- * docker build -t onap/policy/policy-pe target/policy-pe
- * docker build -t onap/policy/policy-drools target/policy-drools
Starting the ONAP Policy Framework Docker Images
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+------------------------------------------------
+
In order to run the containers, you can use *docker-compose*. This uses the *docker-compose.yml* yaml file to bring up the ONAP Policy Framework.
-**Step 1.** Make the file *config/drools/drools-tweaks.sh* executable
+**Step 1:** Make the file config/drools/drools-tweaks.sh executable.
+
+ .. code-block:: bash
+
+ chmod +x config/drools/drools-tweaks.sh
+
+
+**Step 2:** Set the IP address to use to be an IP address of a suitable interface on your machine. Save the IP address into the file *config/pe/ip_addr.txt*.
+
+
+**Step 3:** Set the environment variable *MTU* to be a suitable MTU size for the application.
+
+ .. code-block:: bash
+
+ export MTU=9126
- * chmod +x config/drools/drools-tweaks.sh
-**Step 2**. Set the IP address to use to be an IP address of a suitable interface on your machine. Save the IP address into the file *config/pe/ip_addr.txt*.
+**Step 4:** Determine if you want policies pre-loaded or not. By default, all the configuration and operational policies will be pre-loaded by the docker compose script. If you do not wish for that to happen, then export this variable:
-**Step 3**. Set the environment variable *MTU* to be a suitable MTU size for the application.
+ .. code-block:: bash
- * export MTU=9126
+ export PRELOAD_POLICIES=false
-**Step 4**. Run the system using *docker-compose*. Note that on some systems you may have to run the *docker-compose* command as root or using *sudo*. Note that this command takes a number of minutes to execute on a laptop or desktop computer.
- * docker-compose up
+**Step 5:** Run the system using *docker-compose*. Note that on some systems you may have to run the *docker-compose* command as root or using *sudo*. Note that this command takes a number of minutes to execute on a laptop or desktop computer.
+ .. code-block:: bash
+
+ docker-compose up
-Installation Complete
-^^^^^^^^^^^^^^^^^^^^^
**You now have a full standalone ONAP Policy framework up and running!**
+Installation of Controllers and Policies
+----------------------------------------
+
+You may now install a controller and policies on the ONAP Policy Framework. Follow either of the HowTos below to install either the Amsterdam or Beijing controller and policies.
+
+ * `Installation of Amsterdam Controller and vCPE Policy <installAmsterController.html>`_
+ * `Installation of Beijing Controller and Policies <installBeijingController.html>`_
+
+
+
.. _Standalone Quick Start : https://wiki.onap.org/display/DW/ONAP+Policy+Framework%3A+Standalone+Quick+Start
+
+End of Document
+
Code Review / policy / engine.git / blobdiff