linkcheck_ignore = [
+ "https://istio-release.storage.googleapis.com/charts",
r'http://localhost:\d+/'
]
.. http://creativecommons.org/licenses/by/4.0
.. Copyright (C) 2022 Nordix Foundation
+.. Links
+.. _Kubernetes LoadBalancer: https://kubernetes.io/docs/concepts/services-networking/service/#loadbalancer
+.. _Kubernetes NodePort: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
+
.. _oom_access_info_guide:
OOM Access Info
----------------
+###############
.. figure:: ../../resources/images/oom_logo/oomLogoV2-medium.png
:align: right
+Access via NodePort/Loadbalancer
+********************************
+
+The ONAP deployment created by OOM operates in a private IP network that isn't
+publicly accessible (i.e. OpenStack VMs with private internal network) which
+blocks access to the ONAP User Interfaces.
+To enable direct access to a service from a user's own environment (a laptop etc.)
+the application's internal port is exposed through a `Kubernetes NodePort`_ or
+`Kubernetes LoadBalancer`_ object.
+
+Typically, to be able to access the Kubernetes nodes publicly a public address
+is assigned. In OpenStack this is a floating IP address.
+
+Most ONAP applications use the `NodePort` as predefined `service:type`,
+which opens allows access to the service through the the IP address of each
+Kubernetes node.
+When using the `Loadbalancer` as `service:type` `Kubernetes LoadBalancer`_ object
+which gets a separate IP address.
+
+.. note::
+ The following example uses the `ONAP Portal`, which is not actively maintained
+ in Kohn and will be replaced in the future
+
+When e.g. the `portal-app` chart is deployed a Kubernetes service is created that
+instantiates a load balancer. The LB chooses the private interface of one of
+the nodes as in the example below (10.0.0.4 is private to the K8s cluster only).
+Then to be able to access the portal on port 8989 from outside the K8s &
+OpenStack environment, the user needs to assign/get the floating IP address that
+corresponds to the private IP as follows::
+
+ > kubectl -n onap get services|grep "portal-app"
+ portal-app LoadBalancer 10.43.142.201 10.0.0.4 8989:30215/TCP,8006:30213/TCP,8010:30214/TCP 1d app=portal-app,release=dev
+
+
+In this example, use the 11.0.0.4 private address as a key find the
+corresponding public address which in this example is 10.12.6.155. If you're
+using OpenStack you'll do the lookup with the horizon GUI or the OpenStack CLI
+for your tenant (openstack server list). That IP is then used in your
+`/etc/hosts` to map the fixed DNS aliases required by the ONAP Portal as shown
+below::
+
+ 10.12.6.155 portal.api.simpledemo.onap.org
+ 10.12.6.155 vid.api.simpledemo.onap.org
+ 10.12.6.155 sdc.api.fe.simpledemo.onap.org
+ 10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
+ 10.12.6.155 sdc.dcae.plugin.simpledemo.onap.org
+ 10.12.6.155 portal-sdk.simpledemo.onap.org
+ 10.12.6.155 policy.api.simpledemo.onap.org
+ 10.12.6.155 aai.api.sparky.simpledemo.onap.org
+ 10.12.6.155 cli.api.simpledemo.onap.org
+ 10.12.6.155 msb.api.discovery.simpledemo.onap.org
+ 10.12.6.155 msb.api.simpledemo.onap.org
+ 10.12.6.155 clamp.api.simpledemo.onap.org
+ 10.12.6.155 so.api.simpledemo.onap.org
+ 10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
+
+Ensure you've disabled any proxy settings the browser you are using to access
+the portal and then simply access now the new ssl-encrypted URL:
+``https://portal.api.simpledemo.onap.org:30225/ONAPPORTAL/login.htm``
+
+.. note::
+ Using the HTTPS based Portal URL the Browser needs to be configured to accept
+ unsecure credentials.
+ Additionally when opening an Application inside the Portal, the Browser
+ might block the content, which requires to disable the blocking and reloading
+ of the page
+
+.. note::
+ Besides the ONAP Portal the Components can deliver additional user interfaces,
+ please check the Component specific documentation.
+
+.. note::
+
+ | Alternatives Considered:
+
+ - Kubernetes port forwarding was considered but discarded as it would
+ require the end user to run a script that opens up port forwarding tunnels
+ to each of the pods that provides a portal application widget.
+
+ - Reverting to a VNC server similar to what was deployed in the Amsterdam
+ release was also considered but there were many issues with resolution,
+ lack of volume mount, /etc/hosts dynamic update, file upload that were
+ a tall order to solve in time for the Beijing release.
+
+ Observations:
+
+ - If you are not using floating IPs in your Kubernetes deployment and
+ directly attaching a public IP address (i.e. by using your public provider
+ network) to your K8S Node VMs' network interface, then the output of
+ 'kubectl -n onap get services | grep "portal-app"'
+ will show your public IP instead of the private network's IP. Therefore,
+ you can grab this public IP directly (as compared to trying to find the
+ floating IP first) and map this IP in /etc/hosts.
+
Some relevant information regarding accessing OOM from outside the cluster etc
+ONAP Nodeports
+==============
+
+NodePorts are used to allow client applications, that run outside of
+Kubernetes, access to ONAP components deployed by OOM.
+A NodePort maps an externally reachable port to an internal port of an ONAP
+microservice.
+It should be noted that the use of NodePorts is temporary.
+An alternative solution based on Ingress Controller, which initial support is
+already in place. It is planned to become a default deployment option in the
+London release.
+
+More information from official Kubernetes documentation about
+`Kubernetes NodePort`_.
+
+The following table lists all the NodePorts used by ONAP.
+
+.. csv-table:: NodePorts table
+ :file: ../../resources/csv/nodeports.csv
+ :widths: 20,20,20,20,20
+ :header-rows: 1
+
+
+This table retrieves information from the ONAP deployment using the following
+Kubernetes command:
+
+.. code-block:: bash
+
+ kubectl get svc -n onap -o go-template='{{range .items}}{{range.spec.ports}}{{if .nodePort}}{{.nodePort}}{{.}}{{"\n"}}{{end}}{{end}}{{end}}'
+
+
+(Optional) Access via Ingress
+*****************************
+
+Using Ingress as access method requires the installation of an Ingress
+controller and the configuration of the ONAP deployment to use it.
+
+For "ONAP on ServiceMesh" you can find the instructions in:
+
+- :ref:`oom_base_optional_addons`
+- :ref:`oom_customize_overrides`
+
+In the ServiceMesh deployment the Istio IngressGateway is the only access point
+for ONAP component interfaces.
+Usually the Ingress is accessed via a LoadBalancer IP (<ingress-IP>),
+which is used as central address.
+All APIs/UIs are provided via separate URLs which are routed to the component service.
+To use these URLs they need to be resolvable via DNS or via /etc/hosts.
+
+The domain name is usually defined in the `global` section of the ONAP helm-charts,
+`virtualhost.baseurl` (here "simpledemo.onap.org") whereas the hostname of
+the service (e.g. "sdc-fe-ui") is defined in the component's chart.
+
+.. code-block:: none
-.. toctree::
- :maxdepth: 1
+ <ingress-IP> kiali.simpledemo.onap.org
+ <ingress-IP> cds-ui.simpledemo.onap.org
+ <ingress-IP> sdc-fe-ui.simpledemo.onap.org
+ ...
- oom_ingress_access.rst
+To access e.g. the SDC UI now the new ssl-encrypted URL:
+``https://sdc-fe-ui.simpledemo.onap.org/sdc1``
+++ /dev/null
-.. This work is licensed under a Creative Commons Attribution 4.0
-.. International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. Copyright (C) 2022 Nordix Foundation
-
-.. Links
-
-
-.. figure:: ../../resources/images/oom_logo/oomLogoV2-medium.png
- :align: right
-
-.. _oom_ingress_access:
-
-
-Ingress access to OOM
-#####################
-
-TBD
Enabling/Disabling Components
------------------------------
+*****************************
Here is an example of the nominal entries that need to be provided.
Different values files are available for different contexts.
|
-Some other heading
-------------------
-adva
\ No newline at end of file
+(Optional) "ONAP on Service Mesh"
+*********************************
+
+To enable "ONAP on Service Mesh" both "ServiceMesh" and "Ingress"
+configuration entries need to be configured before deployment.
+
+Global settings relevant for ServiceMesh:
+
+.. code-block:: yaml
+
+ global:
+ ingress:
+ # generally enable ingress for ONAP components
+ enabled: false
+ # enable all component's Ingress interfaces
+ enable_all: false
+ # default Ingress base URL
+ # can be overwritten in component by setting ingress.baseurlOverride
+ virtualhost:
+ baseurl: "simpledemo.onap.org"
+ # All http requests via ingress will be redirected on Ingress controller
+ # only valid for Istio Gateway (ServiceMesh enabled)
+ config:
+ ssl: "redirect"
+ # you can set an own Secret containing a certificate
+ # only valid for Istio Gateway (ServiceMesh enabled)
+ # tls:
+ # secret: 'my-ingress-cert'
+ # optional: Namespace of the Istio IngressGateway
+ # only valid for Istio Gateway (ServiceMesh enabled)
+ namespace: istio-ingress
+ ...
+ serviceMesh:
+ enabled: true
+ tls: true
+ # be aware that linkerd is not well tested
+ engine: "istio" # valid value: istio or linkerd
+ aafEnabled: false
+ cmpv2Enabled: false
+ tlsEnabled: false
+ msbEnabled: false
+
+ServiceMesh settings:
+
+- enabled: true → enables ServiceMesh functionality in the ONAP Namespace (Istio: enables Sidecar deployment)
+- tls: true → enables mTLS encryption in Sidecar communication
+- engine: istio → sets the SM engine (currently only Istio is supported)
+- aafEnabled: false → disables AAF usage for TLS interfaces
+- tlsEnabled: false → disables creation of TLS in component services
+- cmpv2Enabled: false → disable cmpv2 feature
+- msbEnabled: false → MSB is not used in Istio setup (Open, if all components are MSB independend)
+
+Ingress settings:
+
+- enabled: true → enables Ingress using: Nginx (when SM disabled), Istio IngressGateway (when SM enabled)
+- enable_all: true → enables Ingress configuration in each component
+- virtualhost.baseurl: "simpledemo.onap.org" → sets globally the URL for all Interfaces set by the components,
+ resulting in e.g. "aai-api.simpledemo.onap.org", can be overwritten in the component via: ingress.baseurlOverride
+- config.ssl: redirect → sets in the Ingress globally the redirection of all Interfaces from http (port 80) to https (port 443)
+- config.tls.secret: "..." → (optional) overrides the default selfsigned SSL certificate with a certificate stored in the specified secret
+- namespace: istio-ingress → (optional) overrides the namespace of the ingress gateway which is used for the created SSL certificate
+
+.. note::
+ For "ONAP on Istio" an example override file (`onap-all-ingress-istio.yaml`)
+ can be found in the `oom/kubernetes/onap/resources/overrides/` directory.
.. Links
.. _Prometheus stack README: https://github.com/prometheus-community/helm-charts/tree/main/charts/kube-prometheus-stack#readme
+.. _ONAP Next Generation Security & Logging Structure: https://wiki.onap.org/pages/viewpage.action?pageId=103417456
+.. _Istio best practices: https://docs.solo.io/gloo-mesh-enterprise/latest/setup/prod/namespaces/
+.. _Istio setup guide: https://istio.io/latest/docs/setup/install/helm/
+.. _Kiali setup guide: https://kiali.io/docs/installation/installation-guide/example-install/
.. _oom_base_optional_addons:
- To install prometheus, execute the following, replacing the <recommended-pm-version> with the version defined in the :ref:`versions_table` table::
> helm install prometheus prometheus-community/kube-prometheus-stack --namespace=prometheus --create-namespace --version=<recommended-pm-version>
+
+ONAP on Service Mesh
+********************
+
+.. warning::
+ "ONAP on Service Mesh" is not fully supported in "Kohn". Full support is
+ planned for London release to support the
+ `ONAP Next Generation Security & Logging Structure`_
+
+.. figure:: ../../resources/images/servicemesh/ServiceMesh.png
+ :align: center
+
+ONAP is currenty planned to support Istio as default ServiceMesh platform.
+Therefor the following instructions describe the setup of Istio and required tools.
+Used `Istio best practices`_ and `Istio setup guide`_
+
+Istio Platform Installation
+===========================
+
+Install Istio Basic Platform
+----------------------------
+
+- Configure the Helm repository::
+
+ > helm repo add istio https://istio-release.storage.googleapis.com/charts
+
+ > helm repo update
+
+- Create a namespace for "mesh-level" configurations::
+
+ > kubectl create namespace istio-config
+
+- Create a namespace istio-system for Istio components::
+
+ > kubectl create namespace istio-system
+
+- Install the Istio Base chart which contains cluster-wide resources used by the
+ Istio control plane, replacing the <recommended-istio-version> with the version
+ defined in the :ref:`versions_table` table::
+
+ > helm upgrade -i istio-base istio/base -n istio-system --version <recommended-istio-version>
+
+- Install the Istio Base Istio Discovery chart which deploys the istiod service, replacing the
+ <recommended-istio-version> with the version defined in the :ref:`versions_table` table
+ (enable the variable to enforce the (sidecar) proxy startup before the container start)::
+
+ > helm upgrade -i istiod istio/istiod -n istio-system --version <recommended-istio-version>
+ --wait --set global.proxy.holdApplicationUntilProxyStarts=true --set meshConfig.rootNamespace=istio-config
+
+Add an EnvoyFilter for HTTP header case
+---------------------------------------
+
+When handling HTTP/1.1, Envoy will normalize the header keys to be all lowercase.
+While this is compliant with the HTTP/1.1 spec, in practice this can result in issues
+when migrating existing systems that might rely on specific header casing.
+In our case a problem was detected in the SDC client implementation, which relies on
+uppercase header values. To solve this problem in general we add a EnvoyFilter to keep
+the uppercase header in the istio-config namespace to apply for all namespaces, but
+set the context to SIDECAR_INBOUND to avoid problems in the connection between Istio-Gateway and Services
+
+- Create a EnvoyFilter file (e.g. envoyfilter-case.yaml)
+
+ .. collapse:: envoyfilter-case.yaml
+
+ .. include:: ../../resources/yaml/envoyfilter-case.yaml
+ :code: yaml
+
+- Apply the change to Istio::
+
+ > kubectl apply -f envoyfilter-case.yaml
+
+Install Istio Gateway
+---------------------
+
+- Create a namespace istio-ingress for the Istio Ingress gateway
+ and enable istio-injection::
+
+ > kubectl create namespace istio-ingress
+
+ > kubectl label namespace istio-ingress istio-injection=enabled
+
+- Install the Istio Gateway chart,replacing the
+ <recommended-istio-version> with the version defined in
+ the :ref:`versions_table` table::
+
+ > helm upgrade -i istio-ingressgateway istio/gateway -n istio-ingress
+ --version <recommended-istio-version> --wait
+
+Kiali Installation
+==================
+
+Kiali is used to visualize the Network traffic in a ServiceMesh enabled cluster
+For setup the kiali operator is used, see `Kiali setup guide`_
+
+- Install kiali-operator namespace::
+
+ > kubectl create namespace kiali-operator
+
+ > kubectl label namespace kiali-operator istio-injection=enabled
+
+- Install the kiali-operator::
+
+ > helm repo add kiali https://kiali.org/helm-charts
+
+ > helm repo update kiali
+
+ > helm install --namespace kiali-operator kiali/kiali-operator
+
+- Create Kiali CR file (e.g. kiali.yaml)
+
+ .. collapse:: kiali.yaml
+
+ .. include:: ../../resources/yaml/kiali.yaml
+ :code: yaml
+
+- Install kiali::
+
+ > kubectl apply -f kiali.yaml
+
+- Create Ingress gateway entry for the kiali web interface
+ using the configured Ingress <base-url> (here "simpledemo.onap.org")
+ as described in :ref:`oom_customize_overrides`
+
+ .. collapse:: kiali-ingress.yaml
+
+ .. include:: ../../resources/yaml/kiali-ingress.yaml
+ :code: yaml
+
+- Add the Ingress entry for Kiali::
+
+ > kubectl -n istio-system apply -f kiali-ingress.yaml
+
+
+Jaeger Installation
+===================
+
+To be done...
\ No newline at end of file
.. _versions_table:
-.. table:: OOM Software Requirements
-
- ============== =========== ======= ======== ======== ============ ================= =======
- Release Kubernetes Helm kubectl Docker Cert-Manager Prometheus Stack Strimzi
- ============== =========== ======= ======== ======== ============ ================= =======
- Jakarta 1.22.4 3.6.3 1.22.4 20.10.x 1.8.0 35.x 0.28.0
- Kohn 1.23.8 3.8.2 1.23.8 20.10.x 1.8.0 35.x 0.32.0
- ============== =========== ======= ======== ======== ============ ================= =======
+.. table:: OOM Software Requirements (base)
+
+ ============== =========== ======= ======== ======== ============ =======
+ Release Kubernetes Helm kubectl Docker Cert-Manager Strimzi
+ ============== =========== ======= ======== ======== ============ =======
+ Jakarta 1.22.4 3.6.3 1.22.4 20.10.x 1.8.0 0.28.0
+ Kohn 1.23.8 3.8.2 1.23.8 20.10.x 1.8.0 0.32.0
+ ============== =========== ======= ======== ======== ============ =======
+
+.. table:: OOM Software Requirements (optional)
+
+ ============== ================= ======
+ Release Prometheus Stack Istio
+ ============== ================= ======
+ Jakarta 35.x ---
+ Kohn 35.x 1.15.1
+ ============== ================= ======
.. toctree::
<...>
-Accessing the ONAP Portal using OOM and a Kubernetes Cluster
-------------------------------------------------------------
-
-The ONAP deployment created by OOM operates in a private IP network that isn't
-publicly accessible (i.e. OpenStack VMs with private internal network) which
-blocks access to the ONAP Portal. To enable direct access to this Portal from a
-user's own environment (a laptop etc.) the portal application's port 8989 is
-exposed through a `Kubernetes LoadBalancer`_ object.
-
-Typically, to be able to access the Kubernetes nodes publicly a public address
-is assigned. In OpenStack this is a floating IP address.
-
-When the `portal-app` chart is deployed a Kubernetes service is created that
-instantiates a load balancer. The LB chooses the private interface of one of
-the nodes as in the example below (10.0.0.4 is private to the K8s cluster only).
-Then to be able to access the portal on port 8989 from outside the K8s &
-OpenStack environment, the user needs to assign/get the floating IP address that
-corresponds to the private IP as follows::
-
- > kubectl -n onap get services|grep "portal-app"
- portal-app LoadBalancer 10.43.142.201 10.0.0.4 8989:30215/TCP,8006:30213/TCP,8010:30214/TCP 1d app=portal-app,release=dev
-
-
-In this example, use the 11.0.0.4 private address as a key find the
-corresponding public address which in this example is 10.12.6.155. If you're
-using OpenStack you'll do the lookup with the horizon GUI or the OpenStack CLI
-for your tenant (openstack server list). That IP is then used in your
-`/etc/hosts` to map the fixed DNS aliases required by the ONAP Portal as shown
-below::
-
- 10.12.6.155 portal.api.simpledemo.onap.org
- 10.12.6.155 vid.api.simpledemo.onap.org
- 10.12.6.155 sdc.api.fe.simpledemo.onap.org
- 10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
- 10.12.6.155 sdc.dcae.plugin.simpledemo.onap.org
- 10.12.6.155 portal-sdk.simpledemo.onap.org
- 10.12.6.155 policy.api.simpledemo.onap.org
- 10.12.6.155 aai.api.sparky.simpledemo.onap.org
- 10.12.6.155 cli.api.simpledemo.onap.org
- 10.12.6.155 msb.api.discovery.simpledemo.onap.org
- 10.12.6.155 msb.api.simpledemo.onap.org
- 10.12.6.155 clamp.api.simpledemo.onap.org
- 10.12.6.155 so.api.simpledemo.onap.org
- 10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
-
-Ensure you've disabled any proxy settings the browser you are using to access
-the portal and then simply access now the new ssl-encrypted URL:
-``https://portal.api.simpledemo.onap.org:30225/ONAPPORTAL/login.htm``
-
-.. note::
- Using the HTTPS based Portal URL the Browser needs to be configured to accept
- unsecure credentials.
- Additionally when opening an Application inside the Portal, the Browser
- might block the content, which requires to disable the blocking and reloading
- of the page
-
-.. note::
- Besides the ONAP Portal the Components can deliver additional user interfaces,
- please check the Component specific documentation.
-
-.. note::
-
- | Alternatives Considered:
-
- - Kubernetes port forwarding was considered but discarded as it would
- require the end user to run a script that opens up port forwarding tunnels
- to each of the pods that provides a portal application widget.
-
- - Reverting to a VNC server similar to what was deployed in the Amsterdam
- release was also considered but there were many issues with resolution,
- lack of volume mount, /etc/hosts dynamic update, file upload that were
- a tall order to solve in time for the Beijing release.
-
- Observations:
-
- - If you are not using floating IPs in your Kubernetes deployment and
- directly attaching a public IP address (i.e. by using your public provider
- network) to your K8S Node VMs' network interface, then the output of
- 'kubectl -n onap get services | grep "portal-app"'
- will show your public IP instead of the private network's IP. Therefore,
- you can grab this public IP directly (as compared to trying to find the
- floating IP first) and map this IP in /etc/hosts.
.. figure:: ../../resources/images/oom_logo/oomLogoV2-Monitor.png
:align: right
--- /dev/null
+NodePort,Component,Service name,targetPort,Port
+30200,VID,vid,8443,8443
+30201,SDNC,sdnc-portal,8443,8443
+30203,SDNC,sdnc-dgbuilder,3100,3000
+30204,SDC,sdc-be-external,8443,8443
+30207,SDC,sdc-fe,9443,9443
+30209,ROBOT,robot,443,443
+30210,AAI,aai-modelloader,8080,8080
+30211,APPC,appc,9191,9090
+30212,PORTAL,portal-sdk,8443,8443
+30218,POLICY,pap,9091,9091
+30219,POLICY,pap,8443,8443
+30220,AAI,aai-sparky-be,8000,8000
+30222,DCAE,xdcae-hv-ves-collector,6061,6061
+30225,PORTAL,portal-app,8443,8443
+30226,DMAAP,message-router-external,3905,3905
+30228,APPC,appc-dgbuilder,3100,3000
+30229,AAI,aai-modelloader,8443,8443
+30230,APPC,appc,8443,8443
+30231,APPC,appc,1830,1830
+30233,AAI,aai,8443,8443
+30234,POMBA*),pomba-kibana,5601,5601
+30242,DMAAP,dmaap-bc,8443,8443
+30248,OOF,oof-osdf,8699,8698
+30249,POMBA*),pomba-data-router,9502,9502
+30251,AAF,aaf-gui,8200,8200
+30253,LOG*),log-kibana,5601,5601
+30254,LOG*),log-es,9200,9200
+30255,LOG*),log-ls,5044,5044
+30256,SDC,sdc-wfd-fe,8443,8443
+30257,SDC,sdc-wfd-be,8443,8443
+30258,CLAMP,clamp-external,2443,2443
+30260,CLI,cli,443,443
+30264,DCAE,sdc-dcae-fe,9444,9444
+30266,DCAE,sdc-dcae-dt,9446,9446
+30267,SDNC,sdnc,8443,8443
+30269,DMAAP,dmaapr-prov,443,8443
+30271,CLI,cli,9090,9090
+30274,EXTAPI,nbi,8443,8443
+30275,OOF,oof-has-api,8091,8091
+30277,SO,so,8080,8080
+30279,AAI,aai-babel,9516,9516
+30283,MSB,msb-iag,443,443
+30284,MSB,msb-eag,443,443
+30288,SNIRO*),sniro-emulator,9999,80
+30289,APPC,appc-cdt,18080,18080
+30290,CLAMP,cdash-kibana,5601,5601
+30297,VNFSDK,refrepo,8703,8703
+30299,POMBA*),pomba-networkdiscovery,8443,9531
+30398,UUI,uui,8443,8443
+30399,UUI,uui-server,8082,8082
+30406,SO,so-vnfm-adapter,9092,9092
+30407,MUSIC,music,8443,8443
+30417,DCAE,xdcae-ves-collector,8443,8443
+30418,DCAE,dashboard,8443,8443
+30420,NETBOX,netbox-nginx,8080,8080
+30478,AWX,awx-web,8080,80
+30490,DMAAP,message-router-kafka-0,9091,9091
+30491,DMAAP,message-router-kafka-1,9091,9091
+30492,DMAAP,message-router-kafka-2,9091,9091
+30494,DMAAP,dmaap-dr-node-external,8443,8443
+30497,CDS,cds-ui,3000,3000
\ No newline at end of file
--- /dev/null
+apiVersion: networking.istio.io/v1alpha3
+kind: EnvoyFilter
+metadata:
+ name: header-casing
+ namespace: istio-config
+spec:
+ configPatches:
+ - applyTo: CLUSTER
+ match:
+ context: SIDECAR_INBOUND
+ patch:
+ operation: MERGE
+ value:
+ typed_extension_protocol_options:
+ envoy.extensions.upstreams.http.v3.HttpProtocolOptions:
+ '@type': type.googleapis.com/envoy.extensions.upstreams.http.v3.HttpProtocolOptions
+ use_downstream_protocol_config:
+ http_protocol_options:
+ header_key_format:
+ stateful_formatter:
+ name: preserve_case
+ typed_config:
+ '@type': type.googleapis.com/envoy.extensions.http.header_formatters.preserve_case.v3.PreserveCaseFormatterConfig
+ - applyTo: NETWORK_FILTER
+ match:
+ listener:
+ filterChain:
+ filter:
+ name: envoy.filters.network.http_connection_manager
+ patch:
+ operation: MERGE
+ value:
+ typed_config:
+ '@type': type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager
+ http_protocol_options:
+ header_key_format:
+ stateful_formatter:
+ name: preserve_case
+ typed_config:
+ '@type': type.googleapis.com/envoy.extensions.http.header_formatters.preserve_case.v3.PreserveCaseFormatterConfig
\ No newline at end of file
--- /dev/null
+apiVersion: networking.istio.io/v1beta1
+kind: Gateway
+metadata:
+ name: kiali-gateway
+spec:
+ selector:
+ istio: ingressgateway
+ servers:
+ - hosts:
+ - kiali.simpledemo.onap.org
+ port:
+ name: http
+ number: 80
+ protocol: HTTP
+---
+apiVersion: networking.istio.io/v1beta1
+kind: VirtualService
+metadata:
+ name: kiali-service
+spec:
+ hosts:
+ - kiali.simpledemo.onap.org
+ gateways:
+ - kiali-gateway
+ http:
+ - route:
+ - destination:
+ port:
+ number: 20001
+ host: kiali
\ No newline at end of file
--- /dev/null
+apiVersion: kiali.io/v1alpha1
+kind: Kiali
+metadata:
+ name: kiali
+ namespace: istio-system
+ annotations:
+ ansible.operator-sdk/verbosity: "1"
+spec:
+ auth:
+ strategy: anonymous
+ istio_component_namespaces:
+ prometheus: monitoring
+ external_services:
+ grafana:
+ in_cluster_url: http://prometheus-stack-grafana.monitoring
+ prometheus:
+ url: http://prometheus-stack-kube-prom-prometheus.monitoring:9090
+ tracing:
+ in_cluster_url: http://istio-query.observability:16686
+ deployment:
+ accessible_namespaces: ["**"]
+ view_only_mode: false
+ server:
+ web_root: "/kiali"
\ No newline at end of file
Code Review / oom.git / commitdiff
