+++ /dev/null
-#!/bin/bash
-#############################################################################
-#
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#############################################################################
-
-
-
-
-################################## start of vm_init #####################################
-
-set -ex
-
-URL_ROOT='nexus.onap.org/service/local/repositories/raw/content'
-REPO_BLUEPRINTS='org.onap.dcaegen2.platform.blueprints'
-REPO_DEPLOYMENTS='org.onap.dcaegen2.deployments'
-if [ -e /opt/config/dcae_deployment_profile.txt ]; then
- DEPLOYMENT_PROFILE=$(cat /opt/config/dcae_deployment_profile.txt)
-fi
-DEPLOYMENT_PROFILE=${DEPLOYMENT_PROFILE:-R3}
-
-NEXUS_USER=$(cat /opt/config/nexus_username.txt)
-NEXUS_PASSWORD=$(cat /opt/config/nexus_password.txt)
-NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt)
-DOCKER_VERSION=$(cat /opt/config/docker_version.txt)
-
-MYFLOATIP=$(cat /opt/config/dcae_float_ip.txt)
-MYLOCALIP=$(cat /opt/config/dcae_ip_addr.txt)
-HTTP_PROXY=$(cat /opt/config/http_proxy.txt)
-HTTPS_PROXY=$(cat /opt/config/https_proxy.txt)
-
-if [ $HTTP_PROXY != "no_proxy" ]
-then
- export http_proxy=$HTTP_PROXY
- export https_proxy=$HTTPS_PROXY
-fi
-
-# clean up old network configuration in docker engine
-set +e
-if [ -n "$(docker ps -q -a)" ]; then
- docker stop $(docker ps -q -a)
- docker update --restart=no $(docker ps -a -q)
- systemctl restart docker
- docker rm $(docker ps -q -a)
- if [ -n "$(docker network ls | grep 'config_default')" ]; then
- docker network rm config_default
- fi
-fi
-set -e
-
-
-docker login -u "$NEXUS_USER" -p "$NEXUS_PASSWORD" "$NEXUS_DOCKER_REPO"
-
-if [[ $DEPLOYMENT_PROFILE == R1* || $DEPLOYMENT_PROFILE == R2* ]]; then
- echo "R1 and R2 deployment profiles are not supported in Casablanca Heat deployment"
-elif [[ $DEPLOYMENT_PROFILE == R3* ]]; then
- RELEASE_TAG='R3'
-
- set +e
- rm -rf /opt/app/inputs-templates
- mkdir -p /opt/app/inputs-templates
- wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-1.yaml
- wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-2.yaml
- wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-3.yaml
- wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-4.yaml
- wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/register.sh
- wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/setup.sh
- wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/teardown.sh
-
- pip install --upgrade jinja2
- wget https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/scripts/detemplate-bpinputs.py \
- && \
- (python detemplate-bpinputs.py /opt/config /opt/app/inputs-templates /opt/app/config; \
- rm detemplate-bpinputs.py)
-
- if [ -e /opt/app/config/register.sh ]; then
- chmod +x /opt/app/config/register.sh
- fi
- if [ -e /opt/app/config/setup.sh ]; then
- chmod +x /opt/app/config/setup.sh
- fi
- if [ -e /opt/app/config/build-plugins.sh ]; then
- chmod +x /opt/app/config/build-plugins.sh
- fi
- set -e
-
- cd /opt/app/config
- # deploy essentials
- /opt/docker/docker-compose -f docker-compose-1.yaml up -d
-
- # wait for essentials to become ready
- echo "Waiting for Consul to come up ready"
- while ! nc -z localhost 8500; do sleep 1; done
- echo "Waiting for Postgres DB to come up ready"
- while ! nc -z localhost 5432; do sleep 1; done
- echo "Waiting for CBS to come up ready"
- while ! nc -z localhost 10000; do sleep 1; done
- echo "All dependencies are up, proceed to the next phase"
- sleep 30
-
- echo "Setup CloudifyManager and Registrator"
- ./setup.sh
- sleep 10
-
- export http_proxy=""
- export https_proxy=""
-
- ./register.sh
-
- echo "Bring up DCAE MIN service components for R2 use cases"
- /opt/docker/docker-compose -f docker-compose-2.yaml up -d
-
- if [[ "$DEPLOYMENT_PROFILE" == "R3" || "$DEPLOYMENT_PROFILE" == "R3PLUS" ]]; then
- echo "Bring up DCAE platform components"
- /opt/docker/docker-compose -f docker-compose-3.yaml up -d
-
- if [[ "$DEPLOYMENT_PROFILE" == "R3PLUS" ]]; then
- echo "Bring up additional (plus) DCAE service components"
- /opt/docker/docker-compose -f docker-compose-4.yaml up -d
- fi
- fi
-
- # start proxy for consul's health check
- CONSULIP=$(cat /opt/config/dcae_ip_addr.txt)
- echo "Consul is available at $CONSULIP"
-fi
-
-cat >./nginx.conf <<EOL
-server {
- listen 80;
- server_name dcae.simpledemo.onap.org;
- root /www/healthcheck;
-
- location /healthcheck {
- try_files /services.yaml =404;
- }
- location /R3MIN{
- try_files /r3mvp_healthy.yaml =404;
- }
- location /R3 {
- try_files /r3_healthy.yaml =404;
- }
- location /R3PLUS {
- try_files /r3plus_healthy.yaml =404;
- }
-}
-EOL
-
-HEALTHPORT=8000
-docker run -d \
---name dcae-health \
--p ${HEALTHPORT}:80 \
--v "$(pwd)/nginx.conf:/etc/nginx/conf.d/default.conf" \
--v "/tmp/healthcheck:/www/healthcheck" \
---label "SERVICE_80_NAME=dcae-health" \
---label "SERVICE_80_CHECK_HTTP=/healthcheck" \
---label "SERVICE_80_CHECK_INTERVAL=15s" \
---label "SERVICE_80_CHECK_INITIAL_STATUS=passing" \
- nginx
-
-echo "Healthcheck API available at http://${MYFLOATIP}:${HEALTHPORT}/healthcheck"
-echo " http://${MYFLOATIP}:${HEALTHPORT}/R3"
-echo " http://${MYFLOATIP}:${HEALTHPORT}/R3MIN"
-echo " http://${MYFLOATIP}:${HEALTHPORT}/R3PLUS"
-
-# run forever for updating health status based on consul
-set +e
-while :
-do
- rm -rf /tmp/healthcheck/*
- # all registered services
- SERVICES=$(curl -s http://consul:8500/v1/agent/services |jq '. | to_entries[] | .value.Service')
- # passing services
- SERVICES=$(curl -s http://consul:8500/v1/health/state/passing | jq '.[] | .ServiceName')
-
- # remove empty lines/entries
- SERVICES=$(echo "$SERVICES" | sed '/^\s*\"\"\s*$/d' |sed '/^\s*$/d')
-
- SERVICES_JSON=$(echo "$SERVICES" | sed 's/\"$/\",/g' | sed '$ s/.$//')
-
- echo "$(date): running healthy services:"
- echo ">>> $SERVICES"
- PLT_CONSUL=$(echo "$SERVICES" |grep "consul")
- PLT_CBS=$(echo "$SERVICES" |grep "config_binding_service")
- MVP_PG_HOLMES=$(echo "$SERVICES" |grep "pgHolmes")
- MVP_VES=$(echo "$SERVICES" |grep "mvp.*ves")
- MVP_TCA=$(echo "$SERVICES" |grep "mvp.*tca")
- MVP_HR=$(echo "$SERVICES" |grep "mvp.*holmes-rule")
- MVP_HE=$(echo "$SERVICES" |grep "mvp.*holmes-engine")
-
- PLT_CM=$(echo "$SERVICES" |grep "cloudify.*manager")
- PLT_DH=$(echo "$SERVICES" |grep "deployment.*handler")
- PLT_PH=$(echo "$SERVICES" |grep "policy.*handler")
- PLT_SCH=$(echo "$SERVICES" |grep "service.*change.*handler")
- PLT_INV=$(echo "$SERVICES" |grep "inventory")
- PLT_PG_INVENTORY=$(echo "$SERVICES" |grep "pgInventory")
-
- PLUS_MHB=$(echo "$SERVICES" |grep "heartbeat")
- PLUS_PRH=$(echo "$SERVICES" |grep "prh")
- PLUS_MPR=$(echo "$SERVICES" |grep "mapper")
- PLUS_TRAP=$(echo "$SERVICES" |grep "snmptrap")
-
- DATA="{\"healthy\" : \"$(date)\", \"healthy_services\": [${SERVICES_JSON}]}"
- if [[ -n "$PLT_CONSUL" && -n "$PLT_CBS" && -n "$MVP_PG_HOLMES" && -n "$MVP_VES" && \
- -n "$MVP_TCA" ]]; then
- echo "${DATA}" > /tmp/healthcheck/r3mvp_healthy.yaml
- echo "${DATA}" > /tmp/healthcheck/services.yaml
- echo ">>>>>> enough services satisfying R3MIN service deployment"
- else
- echo ">>>>>> not enough services satisfying R3MIN service deployment"
- fi
-
- if [[ -n "$PLT_CONSUL" && -n "$PLT_CBS" && -n "$PLT_CM" && -n "$PLT_DH" && \
- -n "$PLT_PH" && -n "$PLT_SCH" && -n "$PLT_INV" && -n "$PLT_PG_INVENTORY" ]]; then
- echo ">>>>>> enough services satisfying R3 platform deployment"
- echo "${DATA}" > /tmp/healthcheck/r3_healthy.yaml
-
- if [[ -n "$PLUS_MHB" && -n "$PLUS_PRH" && -n "$PLUS_MPR" && -n "$PLUS_TRAP" && -n "$MVP_HR" && -n "$MVP_HE" ]]; then
- echo ">>>>>> enough services satisfying R3PLUS deployment"
- echo "${DATA}" > /tmp/healthcheck/r3plus_healthy.yaml
- else
- echo ">>>>>> not enough services satisfying R3PLUS service deployment"
- fi
- else
- echo ">>>>>> not enough services satisfying R3 platform or R3PLUS service deployment"
- fi
-
- sleep 60
-done
-
Code Review / demo.git / blobdiff