Code Review / ccsdk / distribution.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
[CCSDK-28] populated the seed code for dgbuilder
[ccsdk/distribution.git] / dgbuilder / core_nodes / hardware / 36-rpi-gpio.html
diff --git a/dgbuilder/core_nodes/hardware/36-rpi-gpio.html b/dgbuilder/core_nodes/hardware/36-rpi-gpio.html
new file mode 100644 (file)
index 0000000..9e705c2
--- /dev/null
+++ b/dgbuilder/core_nodes/hardware/36-rpi-gpio.html
@@ -0,0 +1,182 @@
+<!--
+  Copyright 2013,2014 IBM Corp.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+  http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+-->
+
+<script type="text/x-red" data-template-name="rpi-gpio in">
+    <div class="form-row">
+        <label for="node-input-pin"><i class="fa fa-circle"></i> GPIO Pin</label>
+        <select type="text" id="node-input-pin" style="width: 200px;">
+            <option value="-" disabled>select pin </option>
+            <option value="3">3 - SDA1 </option>
+            <option value="5">5 - SCL1 </option>
+            <option value="7">7 - GPIO7</option>
+            <option value="8">8 - TxD </option>
+            <option value="10">10 - RxD </option>
+            <option value="11">11 - GPIO0</option>
+            <option value="12">12 - GPIO1</option>
+            <option value="13">13 - GPIO2</option>
+            <option value="15">15 - GPIO3</option>
+            <option value="16">16 - GPIO4</option>
+            <option value="18">18 - GPIO5</option>
+            <option value="19">19 - MOSI </option>
+            <option value="21">21 - MISO </option>
+            <option value="22">22 - GPIO6</option>
+            <option value="23">23 - SCLK </option>
+            <option value="24">24 - CE0 </option>
+            <option value="26">26 - CE1 </option>
+         </select>
+         &nbsp;<span id="pitype"></span>
+    </div>
+    <div class="form-row">
+        <label for="node-input-intype"><i class="fa fa-long-arrow-up"></i> Resistor?</label>
+        <select type="text" id="node-input-intype" style="width: 150px;">
+        <option value="tri">none</option>
+        <option value="up">pullup</option>
+        <option value="down">pulldown</option>
+        <!--<option value="tri">tristate</option>-->
+        </select>
+    </div>
+    <div class="form-row">
+        <label for="node-input-name"><i class="fa fa-tag"></i> Name</label>
+        <input type="text" id="node-input-name" placeholder="Name">
+    </div>
+    <div class="form-tips">Tip: Only Digital I/O is supported - input must be 0 or 1.</div>
+</script>
+
+<script type="text/x-red" data-help-name="rpi-gpio in">
+    <p>Raspberry Pi input node. Generates a <b>msg.payload</b> with either a 0 or 1 depending on the state of the input pin. Requires the gpio command to work.</p>
+    <p>You may also enable the input pullup resitor or the pulldown resistor.</p>
+    <p>The <b>msg.topic</b> is set to <i>pi/{the pin number}</i></p>
+    <p><b>Note:</b> we are using the actual physical pin numbers on connector P1 as they are easier to locate.</p>
+    <p><b>Note:</b> This node currently polls the pin every 250mS. This is not ideal as it loads the cpu, and will be rewritten shortly to try to use interrupts.</p>
+
+</script>
+
+<script type="text/javascript">
+    RED.nodes.registerType('rpi-gpio in',{
+        category: 'advanced-input',
+        color:"#c6dbef",
+        defaults: {
+            name: { value:"" },
+            intype: { value: "in" },
+            pin: { value:"",required:true,validate:RED.validators.number() },
+        },
+        inputs:0,
+        outputs:1,
+        icon: "rpi.png",
+        label: function() {
+            return this.name||"Pin: "+this.pin ;
+        },
+        labelStyle: function() {
+            return this.name?"node_label_italic":"";
+        },
+        oneditprepare: function() {
+            $.getJSON('rpi-gpio/'+this.id,function(data) {
+                $('#pitype').text(data.type);
+                if (data.type === "Model B+") {
+                    $('#node-input-pin').append($("<option></option>").attr("value",27).text("27 - SDA0"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",28).text("28 - SCL0"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",29).text("29 - GPIO21"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",31).text("31 - GPIO22"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",32).text("32 - GPIO26"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",33).text("33 - GPIO23"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",35).text("35 - GPIO24"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",36).text("36 - GPIO27"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",37).text("37 - GPIO25"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",38).text("38 - GPIO28"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",40).text("40 - GPIO29"));
+                }
+            });
+        }
+    });
+</script>
+
+
+<script type="text/x-red" data-template-name="rpi-gpio out">
+    <div class="form-row">
+        <label for="node-input-pin"><i class="fa fa-circle"></i> GPIO Pin</label>
+        <select type="text" id="node-input-pin" style="width: 200px;">
+            <option value="-">select pin </option>
+            <option value="3">3 - SDA1 </option>
+            <option value="5">5 - SCL1 </option>
+            <option value="7">7 - GPIO7</option>
+            <option value="8">8 - TxD </option>
+            <option value="10">10 - RxD </option>
+            <option value="11">11 - GPIO0</option>
+            <option value="12">12 - GPIO1</option>
+            <option value="13">13 - GPIO2</option>
+            <option value="15">15 - GPIO3</option>
+            <option value="16">16 - GPIO4</option>
+            <option value="18">18 - GPIO5</option>
+            <option value="19">19 - MOSI </option>
+            <option value="21">21 - MISO </option>
+            <option value="22">22 - GPIO6</option>
+            <option value="23">23 - SCLK </option>
+            <option value="24">24 - CE0 </option>
+            <option value="26">26 - CE1 </option>
+         </select>
+         &nbsp;<span id="pitype"></span>
+    </div>
+    <div class="form-row">
+        <label for="node-input-name"><i class="fa fa-tag"></i> Name</label>
+        <input type="text" id="node-input-name" placeholder="Name">
+    </div>
+    <div class="form-tips">Tip: Only Digital I/O is supported - input must be 0 or 1.</div>
+</script>
+
+<script type="text/x-red" data-help-name="rpi-gpio out">
+    <p>Raspberry Pi output node. Expects a <b>msg.payload</b> with either a 0 or 1 (or true or false). Requires the gpio command to work.</p>
+    <p>Will set the selected physical pin high or low depending on the value passed in.</p>
+    <p><b>Note:</b> we are using the actual physical pin numbers on connector P1 as they are easier to locate.</p>
+</script>
+
+<script type="text/javascript">
+    RED.nodes.registerType('rpi-gpio out',{
+        category: 'advanced-output',
+        color:"#c6dbef",
+        defaults: {
+            name: { value:"" },
+            pin: { value:"",required:true,validate:RED.validators.number() },
+        },
+        inputs:1,
+        outputs:0,
+        icon: "rpi.png",
+        align: "right",
+        label: function() {
+            return this.name||"Pin: "+this.pin;
+        },
+        labelStyle: function() {
+            return this.name?"node_label_italic":"";
+        },
+        oneditprepare: function() {
+            $.getJSON('rpi-gpio/'+this.id,function(data) {
+                $('#pitype').text(data.type);
+                if (data.type === "Model B+") {
+                    $('#node-input-pin').append($("<option></option>").attr("value",27).text("27 - SDA0"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",28).text("28 - SCL0"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",29).text("29 - GPIO21"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",31).text("31 - GPIO22"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",32).text("32 - GPIO26"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",33).text("33 - GPIO23"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",35).text("35 - GPIO24"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",36).text("36 - GPIO27"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",37).text("37 - GPIO25"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",38).text("38 - GPIO28"));
+                    $('#node-input-pin').append($("<option></option>").attr("value",40).text("40 - GPIO29"));
+                }
+            });
+        }
+    });
+</script>
CCSDK distribution packaging (e.g. docker containers)