</parent>
<groupId>org.onap.dcaegen2.deployments</groupId>
<artifactId>bootstrap</artifactId>
- <name>bootstrap</name>
+ <name>dcaegen2-deployments-bootstrap</name>
<version>1.0.0-SNAPSHOT</version>
<url>http://maven.apache.org</url>
<properties>
--- /dev/null
+#!/bin/bash
+
+# ================================================================================
+# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+
+clean_templated_files()
+{
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ rm -f "$F2"
+ done
+}
+clean_tox_files()
+{
+ TOX_FILES=$(find . -name ".tox")
+ TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
+ for F in $TOX_FILES; do
+ rm -rf "$F"
+ done
+}
+
+expand_templates()
+{
+ # set up env variables, get ready for template resolution
+ # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
+
+ export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_NEXUSPROXY}/content/sites/pypi"
+
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY"
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots"
+
+
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ cp "$F" "$F2"
+ MOD=$(stat --format '%a' "$F")
+ chmod "$MOD" "$F2"
+ done
+
+
+ TEMPLATES=$(env |grep ONAPTEMPLATE)
+ if [ -z "$TEMPLATES" ]; then
+ return 0
+ fi
+
+ echo "====> Resolving the following temaplate from environment variables "
+ echo "[$TEMPLATES]"
+ SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
+ for TEMPLATE in $TEMPLATES; do
+ KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
+ VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
+ VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
+ set +e
+ FILES=$(grep -rl "$KEY")
+ set -e
+
+ if [ -z "$FILES" ]; then
+ continue
+ fi
+
+ # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
+ for F in $FILES; do
+ if [[ $F == *"$SELFFILE" ]]; then
+ continue
+ fi
+ if [[ "$F" == *-template ]]; then
+ continue
+ fi
+
+ echo "======> Resolving template $KEY to value $VALUE for file $F"
+ sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
+ #cat "$F"
+ done
+
+ #if [ ! -z "$FILES" ]; then
+ # echo "====> Resolving template $VALUE to value $VALUE"
+ # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
+ # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
+ # #echo $CMD
+ # #eval $CMD
+ #fi
+ done
+ echo "====> Done template reolving"
+}
+
+
+run_tox_test()
+{
+ set -x
+ CURDIR=$(pwd)
+ TOXINIS=$(find . -name "tox.ini")
+ for TOXINI in "${TOXINIS[@]}"; do
+ DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
+ cd "${CURDIR}/${DIR}"
+ rm -rf ./venv-tox ./.tox
+ virtualenv ./venv-tox
+ source ./venv-tox/bin/activate
+ pip install --upgrade pip
+ pip install --upgrade tox argparse
+ pip freeze
+ tox
+ deactivate
+ rm -rf ./venv-tox ./.tox
+ done
+}
+
+build_wagons()
+{
+ rm -rf ./*.wgn venv-pkg
+
+ SETUPFILES=$(find . -name "setup.py")
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev)
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+
+ echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION"
+
+ virtualenv ./venv-pkg
+ source ./venv-pkg/bin/activate
+ pip install --upgrade pip
+ pip install wagon
+ wagon create --format tar.gz "$PLUGIN_DIR"
+ deactivate
+ rm -rf venv-pkg
+
+ PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
+ echo Built package: "${PKG_FILE_NAMES[@]}"
+ done
+}
+
+
+upload_raw_file()
+{
+ # Extract the username and password to the nexus repo from the settings file
+ USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
+ NETRC=$(mktemp)
+ echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
+
+ REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
+
+ OUTPUT_FILE=$1
+ EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
+ if [ "$EXT" == 'yaml' ]; then
+ OUTPUT_FILE_TYPE='text/x-yaml'
+ elif [ "$EXT" == 'sh' ]; then
+ OUTPUT_FILE_TYPE='text/x-shellscript'
+ elif [ "$EXT" == 'gz' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ elif [ "$EXT" == 'wgn' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ else
+ OUTPUT_FILE_TYPE='application/octet-stream'
+ fi
+
+
+ if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
+ SEND_TO="${REPO}/${FQDN}/snapshots"
+ elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
+ SEND_TO="${REPO}/${FQDN}/releases"
+ else
+ echo "Unreconfnized deployment type, quit"
+ exit
+ fi
+ if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
+ SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
+ fi
+
+ echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
+}
+
+
+
+upload_wagons_and_type_yamls()
+{
+ WAGONS=$(ls -1 ./*.wgn)
+ for WAGON in $WAGONS ; do
+ WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-')
+ WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-')
+ WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1)
+
+ upload_raw_file "$WAGON"
+ upload_raw_file "$WAGON_TYPEFILE"
+ done
+}
+
+upload_files_of_extension()
+{
+ FILES=$(ls -1 ./*."$1")
+ for F in $FILES ; do
+ upload_raw_file "$F"
+ done
+}
+
+
+
+build_and_push_docker()
+{
+ IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
+ IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
+
+ # use the major and minor version of the MVN artifact version as docker image version
+ VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
+ VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
+
+ LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
+ BUILD_PATH="${WORKSPACE}"
+ # build a docker image
+ docker build --rm -f "${WORKSPACE}"/Dockerfile -t "${LFQI}" "${BUILD_PATH}"
+
+ REPO=""
+ if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+ REPO=$MVN_DOCKERREGISTRY_DAILY
+ elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+ # there seems to be no staging docker registry? set to use SNAPSHOT also
+ #REPO=$MVN_DOCKERREGISTRY_RELEASE
+ REPO=$MVN_DOCKERREGISTRY_DAILY
+ else
+ echo "Fail to determine DEPLOYMENT_TYPE"
+ REPO=$MVN_DOCKERREGISTRY_DAILY
+ fi
+ echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
+
+ if [ ! -z "$REPO" ]; then
+ USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
+ if [ -z "$USER" ]; then
+ echo "Error: no user provided"
+ fi
+ if [ -z "$PASS" ]; then
+ echo "Error: no password provided"
+ fi
+ [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
+ echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
+ docker login "$REPO" -u "$USER" -p "$PASS"
+
+ if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+ REPO="$REPO/snapshots"
+ elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+ # there seems to be no staging docker registry? set to use SNAPSHOT also
+ #REPO=$MVN_DOCKERREGISTRY_RELEASE
+ REPO="$REPO"
+ else
+ echo "Fail to determine DEPLOYMENT_TYPE"
+ REPO="$REPO/unknown"
+ fi
+
+ OLDTAG="${LFQI}"
+ PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
+ for NEWTAG in ${PUSHTAGS}
+ do
+ echo "tagging ${OLDTAG} to ${NEWTAG}"
+ docker tag "${OLDTAG}" "${NEWTAG}"
+ echo "pushing ${NEWTAG}"
+ docker push "${NEWTAG}"
+ OLDTAG="${NEWTAG}"
+ done
+ fi
+
+}
+
+
+
MVN_PROJECT_MODULEID="$1"
MVN_PHASE="$2"
+PROJECT_ROOT=$(dirname $0)
FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
echo "MVN_DOCKERREGISTRY_DAILY is [$MVN_DOCKERREGISTRY_DAILY]"
echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]"
-clean_templated_files()
-{
- TEMPLATE_FILES=$(find . -name "*-template")
- for F in $TEMPLATE_FILES; do
- F2=$(echo "$F" | sed 's/-template$//')
- rm -f "$F2"
- done
-}
-
-
-expand_templates()
-{
- # set up env variables, get ready for template resolution
- # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
-
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
-
- export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_NEXUSPROXY}/content/sites/pypi"
-
- export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY"
- export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots"
-
-
- TEMPLATE_FILES=$(find . -name "*-template")
- for F in $TEMPLATE_FILES; do
- F2=$(echo "$F" | sed 's/-template$//')
- cp "$F" "$F2"
- MOD=$(stat --format '%a' "$F")
- chmod "$MOD" "$F2"
- done
-
-
- TEMPLATES=$(env |grep ONAPTEMPLATE)
- if [ -z "$TEMPLATES" ]; then
- return 0
- fi
-
- echo "====> Resolving the following temaplate from environment variables "
- echo "[$TEMPLATES]"
- SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
- for TEMPLATE in $TEMPLATES; do
- KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
- VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
- VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
- FILES=$(grep -rlv "$KEY")
-
- if [ -z "$FILES" ]; then
- continue
- fi
-
- # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
- for F in $FILES; do
- if [[ $F == *"$SELFFILE" ]]; then
- continue
- fi
- if [[ "$F" == *-template ]]; then
- continue
- fi
-
- echo "======> Resolving template $KEY to value $VALUE for file $F"
- sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
- #cat "$F"
- done
-
- #if [ ! -z "$FILES" ]; then
- # echo "====> Resolving template $VALUE to value $VALUE"
- # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
- # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
- # #echo $CMD
- # #eval $CMD
- #fi
- done
- echo "====> Done template reolving"
-}
-
-
-run_tox_test()
-{
- set -x
- CURDIR=$(pwd)
- TOXINIS=$(find . -name "tox.ini")
- for TOXINI in "${TOXINIS[@]}"; do
- DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
- cd "${CURDIR}/${DIR}"
- rm -rf ./venv-tox ./.tox
- virtualenv ./venv-tox
- source ./venv-tox/bin/activate
- pip install --upgrade pip
- pip install --upgrade tox argparse
- pip freeze
- tox
- deactivate
- rm -rf ./venv-tox ./.tox
- done
-}
-
-build_wagons()
-{
- rm -rf ./*.wgn venv-pkg
-
- SETUPFILES=$(find . -name "setup.py")
- for SETUPFILE in $SETUPFILES; do
- PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev)
- PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
- PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
- echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION"
-
- virtualenv ./venv-pkg
- source ./venv-pkg/bin/activate
- pip install --upgrade pip
- pip install wagon
- wagon create --format tar.gz "$PLUGIN_DIR"
- deactivate
- rm -rf venv-pkg
-
- PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
- echo Built package: "${PKG_FILE_NAMES[@]}"
- done
-}
-
-
-upload_raw_file()
-{
- # Extract the username and password to the nexus repo from the settings file
- USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
- NETRC=$(mktemp)
- echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
-
- REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
-
- OUTPUT_FILE=$1
- EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
- if [ "$EXT" == 'yaml' ]; then
- OUTPUT_FILE_TYPE='text/x-yaml'
- elif [ "$EXT" == 'sh' ]; then
- OUTPUT_FILE_TYPE='text/x-shellscript'
- elif [ "$EXT" == 'gz' ]; then
- OUTPUT_FILE_TYPE='application/gzip'
- elif [ "$EXT" == 'wgn' ]; then
- OUTPUT_FILE_TYPE='application/gzip'
- else
- OUTPUT_FILE_TYPE='application/octet-stream'
- fi
-
-
- if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
- SEND_TO="${REPO}/${FQDN}/snapshots"
- elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
- SEND_TO="${REPO}/${FQDN}/releases"
- else
- echo "Unreconfnized deployment type, quit"
- exit
- fi
- if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
- SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
- fi
-
- echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
-}
-
-
-
-upload_wagons_and_type_yamls()
-{
- WAGONS=$(ls -1 ./*.wgn)
- for WAGON in $WAGONS ; do
- WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-')
- WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-')
- WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1)
-
- upload_raw_file "$WAGON"
- upload_raw_file "$WAGON_TYPEFILE"
- done
-}
-
-upload_files_of_extension()
-{
- FILES=$(ls -1 ./*."$1")
- for F in $FILES ; do
- upload_raw_file "$F"
- done
-}
-
-
-
-build_and_push_docker()
-{
- IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
- IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
-
- # use the major and minor version of the MVN artifact version as docker image version
- VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
- VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
-
- LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
- BUILD_PATH="${WORKSPACE}"
- # build a docker image
- docker build --rm -f "${WORKSPACE}"/Dockerfile -t "${LFQI}" "${BUILD_PATH}"
-
- REPO=""
- if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
- REPO=$MVN_DOCKERREGISTRY_DAILY
- elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
- # there seems to be no staging docker registry? set to use SNAPSHOT also
- #REPO=$MVN_DOCKERREGISTRY_RELEASE
- REPO=$MVN_DOCKERREGISTRY_DAILY
- else
- echo "Fail to determine DEPLOYMENT_TYPE"
- REPO=$MVN_DOCKERREGISTRY_DAILY
- fi
- echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
-
- if [ ! -z "$REPO" ]; then
- USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
- if [ -z "$USER" ]; then
- echo "Error: no user provided"
- fi
- if [ -z "$PASS" ]; then
- echo "Error: no password provided"
- fi
- [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
- echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
- docker login "$REPO" -u "$USER" -p "$PASS"
-
- if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
- REPO="$REPO/snapshots"
- elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
- # there seems to be no staging docker registry? set to use SNAPSHOT also
- #REPO=$MVN_DOCKERREGISTRY_RELEASE
- REPO="$REPO"
- else
- echo "Fail to determine DEPLOYMENT_TYPE"
- REPO="$REPO/unknown"
- fi
-
- OLDTAG="${LFQI}"
- PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
- for NEWTAG in ${PUSHTAGS}
- do
- echo "tagging ${OLDTAG} to ${NEWTAG}"
- docker tag "${OLDTAG}" "${NEWTAG}"
- echo "pushing ${NEWTAG}"
- docker push "${NEWTAG}"
- OLDTAG="${NEWTAG}"
- done
- fi
-
-}
-
+source "${PROJECT_ROOT}"/mvn-phase-lib.sh
# Customize the section below for each project
case $MVN_PHASE in
clean)
echo "==> clean phase script"
clean_templated_files
+ clean_tox_files
rm -rf ./venv-* ./*.wgn
;;
generate-sources)
;;
deploy)
echo "==> deploy phase script"
+
case $MVN_PROJECT_MODULEID in
bootstrap)
+ # build docker image from Docker file (under module dir) and push to registry
build_and_push_docker
;;
scripts)
+ # upload all sh file under the root of module
upload_files_of_extension sh
;;
*)
echo "====> unknown mvn project module"
;;
esac
+
;;
*)
echo "==> unprocessed phase"
<!--- CHANGE THE FOLLOWING 3 OBJECTS for your own repo -->
<groupId>org.onap.dcaegen2</groupId>
<artifactId>deployments</artifactId>
- <name>deployments</name>
+ <name>dcaegen2-deployments</name>
<version>1.0.0-SNAPSHOT</version>
<url>http://maven.apache.org</url>
<version>1.0.0-SNAPSHOT</version>
</parent>
<groupId>org.onap.dcaegen2.deployments</groupId>
- <artifactId>scripts</artifactId>
+ <artifactId>dcaegen2-deployments-scripts</artifactId>
<name>scripts</name>
<version>1.0.0-SNAPSHOT</version>
<url>http://maven.apache.org</url>
Code Review / dcaegen2 / deployments.git / commitdiff