--- /dev/null
+.project
+Dockerfile
+.vscode
+bootstrap-container.code-workspace
+target
\ No newline at end of file
--- /dev/null
+# ============LICENSE_START=======================================================
+# org.onap.dcae
+# ================================================================================
+# Copyright (c) 2018-2020 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+FROM centos:7.4.1708
+LABEL maintainer="maintainer"
+
+ENV DCAE_REPO {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}
+ENV CCSDK_REPO {{ ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases }}
+ENV BP_REPO {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases }}
+
+# Install gcc
+RUN yum install -y gcc python-devel
+
+# Install Consul
+RUN yum install -y unzip \
+ && mkdir -p /opt/consul/bin \
+ && mkdir -p /opt/consul/data \
+ && mkdir -p /opt/consul/config \
+ && curl -Ssf https://releases.hashicorp.com/consul/1.2.1/consul_1.2.1_linux_amd64.zip > /tmp/consul.zip \
+ && unzip -pj /tmp/consul.zip > /opt/consul/bin/consul \
+ && chmod +x /opt/consul/bin/consul
+COPY config/00-consul.json /opt/consul/config/
+
+# Install jq
+RUN curl -Ssf -L "https://github.com/stedolan/jq/releases/download/jq-1.5/jq-linux64" > /bin/jq \
+&& chmod +x /bin/jq
+
+# Install pip and Cloudify CLI (stay at version 4.2 because of changes in higher versions)
+RUN curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py \
+ && python get-pip.py \
+ && rm get-pip.py \
+ && pip install cloudify==4.2
+
+# Copy scripts
+RUN mkdir scripts
+COPY scripts/ /scripts
+
+# Get plugins from raw repos
+RUN scripts/load-plugins.sh ${DCAE_REPO} ${CCSDK_REPO} \
+ && rm scripts/load-plugins.sh \
+# Make sure scripts are executable
+ && chmod +x /scripts/*.sh
+
+# Load blueprints and input templates
+COPY blueprints/ /blueprints
+
+# Set up runtime script
+ENTRYPOINT exec "/scripts/bootstrap.sh"
--- /dev/null
+# DCAE Blueprints and Bootstrap Container
+This repository holds the source code needed to build the
+Docker image for the DCAE bootstrap container. The bootstrap
+container runs at DCAE deployment time (via a Helm chart) and
+does initial setup of the DCAE environment. This includes
+deploying several service components using Cloudify Manager.
+
+This repository also holds Cloudify blueprints for service components.
+The Docker build process copies these blueprints into the Docker image
+for the bootstrap container.
+
+_Note: Prior to the Frankfurt release (R6), this repository held blueprint templates
+for components deployed using Cloudify Manager. The build process for this
+repository expanded the templates and pushed them to the Nexus raw
+repository. The DCAE bootstrap container was hosted in the `dcaegen2.deployments` repository. The Docker build process for the bootstrap containter image pulled the blueprints it needed from the Nexus raw repository._
+
+## DCAE Bootstrap Container
+This container is responsible for loading plugins and wagons onto the
+DCAE Cloudify Manager instance and for launching DCAE components.
+
+The Docker image build process loads plugins and blueprints into the
+image's file system. The plugins are pulled from the Nexus raw repository. The
+blueprints are copied from the `blueprints` directory in this repository. At run time, the main script in the container
+(`bootstrap.sh`) uploads the plugins to Cloudify Manager, then installs
+components using the blueprints.
+
+The container expects to be started with two environment variables:
+ - `CMADDR` -- the address of the target Cloudify Manager
+ - `CMPASS` -- the password for Cloudify Manager
+
+The container expects input files to use when deploying the blueprints.
+It expects to find them in /inputs. The normal method for launching
+the container is via a Helm Chart launched by OOM. That chart creates
+a Kubernetes ConfigMap containing the input files. The ConfigMap is
+mounted as a volume at /inputs.
+
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases }}/type_files/helm/4.0.0/helm-type.yaml"
+ - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/helm/4.0.0/helm-type.yaml"
inputs:
tiller-server-ip:
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases }}/type_files/helm/4.0.0/helm-type.yaml"
+ - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/helm/4.0.0/helm-type.yaml"
inputs:
tiller-server-ip:
tosca_definitions_version: cloudify_dsl_1_3
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
-- "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml"
-- "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/dcaepolicyplugin/2.4.0/dcaepolicyplugin_types.yaml"
-- "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases }}/type_files/pgaas/1.1.0/pgaas_types.yaml"
+- "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml"
+- "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/dcaepolicyplugin/2.4.0/dcaepolicyplugin_types.yaml"
+- "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/pgaas/1.1.0/pgaas_types.yaml"
inputs:
dcae_CL_publish_url:
type: string
default: holmes
he_image:
type: string
- default: "{{ ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases }}/onap/holmes/engine-management:v1.0.0"
+ default: "nexus3.onap.org:10001/onap/holmes/engine-management:v1.0.0"
node_templates:
pgaasvm:
tosca_definitions_version: cloudify_dsl_1_3
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
-- "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml"
-- "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/dcaepolicyplugin/2.4.0/dcaepolicyplugin_types.yaml"
-- "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases }}/type_files/pgaas/1.1.0/pgaas_types.yaml"
+- "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml"
+- "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/dcaepolicyplugin/2.4.0/dcaepolicyplugin_types.yaml"
+- "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/pgaas/1.1.0/pgaas_types.yaml"
inputs:
msb_hostname:
type: string
default: holmes
hr_image:
type: string
- default: "{{ ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases }}/onap/holmes/rule-management:v1.0.0"
+ default: "nexus3.onap.org:10001/onap/holmes/rule-management:v1.0.0"
node_templates:
pgaasvm:
type: dcae.nodes.pgaas.database
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml
+ - https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml
inputs:
tag_version:
type: string
- default: '{{ ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases }}/onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.3.0'
+ default: 'nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.3.0'
hv_ves_name:
type: string
default: 'dcae-hv-ves-collector'
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/relationshipplugin/1.1.0/relationshipplugin_types.yaml"
- - "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases }}/type_files/sshkeyshare/sshkey_types.yaml"
- - "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases }}/type_files/pgaas/1.1.0/pgaas_types.yaml"
+ - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/relationshipplugin/1.1.0/relationshipplugin_types.yaml"
+ - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/sshkeyshare/sshkey_types.yaml"
+ - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/pgaas/1.1.0/pgaas_types.yaml"
inputs:
blueprint_version:
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml
+ - https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml
inputs:
pnfUrl:
default: "admin"
tag_version:
type: string
- default: "{{ ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases }}/onap/org.onap.dcaegen2.services.prh.prh-app-server:1.4.0"
+ default: "nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.prh.prh-app-server:1.4.0"
replicas:
type: integer
description: number of instances
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml
+ - https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml
inputs:
tag_version:
type: string
- default: "{{ ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases }}/onap/org.onap.dcaegen2.collectors.snmptrap:1.4.0"
+ default: "nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.snmptrap:1.4.0"
cache:
type: string
default:
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml"
- - "{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/clamppolicyplugin/1.1.0/clamppolicyplugin_types.yaml"
+ - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml"
+ - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/clamppolicyplugin/1.1.0/clamppolicyplugin_types.yaml"
inputs:
aaiEnrichmentHost:
type: string
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml
- - {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/dcaepolicyplugin/2.4.0/dcaepolicyplugin_types.yaml
+ - https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml
+ - https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/dcaepolicyplugin/2.4.0/dcaepolicyplugin_types.yaml
inputs:
aaiEnrichmentHost:
type: string
default: dcae-redis.onap.svc.cluster.local:6379
tag_version:
type: string
- default: "{{ ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases }}/onap/org.onap.dcaegen2.deployments.tca-cdap-container:1.0.0"
+ default: "nexus3.onap.org:10001/onap/org.onap.dcaegen2.deployments.tca-cdap-container:1.0.0"
consul_host:
type: string
default: consul-server.onap.svc.cluster.local
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml
+ - https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml
inputs:
aaiEnrichmentHost:
type: string
default: dcae-redis.onap.svc.cluster.local:6379
tag_version:
type: string
- default: "{{ ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases }}/onap/org.onap.dcaegen2.deployments.tca-cdap-container:1.2.2"
+ default: "nexus3.onap.org:10001/onap/org.onap.dcaegen2.deployments.tca-cdap-container:1.2.2"
consul_host:
type: string
default: consul-server.onap.svc.cluster.local
imports:
- https://www.getcloudify.org/spec/cloudify/4.5.5/types.yaml
- - {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}/k8splugin/1.7.2/k8splugin_types.yaml
+ - https://nexus.onap.org/service/local/repositories/raw/content/org.onap.dcaegen2.platform.plugins/R6/k8splugin/1.7.2/k8splugin_types.yaml
inputs:
ves_other_publish_url:
+++ /dev/null
-<?xml version="1.0"?>
-<!--
-================================================================================
-Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
-================================================================================
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-============LICENSE_END=========================================================
-
-ECOMP is a trademark and service mark of AT&T Intellectual Property.
--->
-<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
- <modelVersion>4.0.0</modelVersion>
- <parent>
- <groupId>org.onap.dcaegen2.platform</groupId>
- <artifactId>blueprints</artifactId>
- <version>1.2.0-SNAPSHOT</version>
- </parent>
- <groupId>org.onap.dcaegen2.platform.blueprints</groupId>
- <artifactId>blueprints</artifactId>
- <name>blueprints</name>
- <version>1.0.0-SNAPSHOT</version>
- <url>http://maven.apache.org</url>
-
- <properties>
- <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
- <sonar.skip>true</sonar.skip>
- <sonar.sources>.</sonar.sources>
- <!-- customize the SONARQUBE URL -->
- <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
- <!-- below are language dependent -->
- <!-- for Python -->
- <sonar.language>py</sonar.language>
- <sonar.pluginName>Python</sonar.pluginName>
- <sonar.inclusions>**/*.py</sonar.inclusions>
- <!-- for JavaScaript -->
- <!--
- <sonar.language>js</sonar.language>
- <sonar.pluginName>JS</sonar.pluginName>
- <sonar.inclusions>**/*.js</sonar.inclusions>
- -->
- </properties>
- <build>
- <finalName>${project.artifactId}-${project.version}</finalName>
- <plugins>
- <!-- plugin>
- <artifactId>maven-assembly-plugin</artifactId>
- <version>2.4.1</version>
- <configuration>
- <descriptors>
- <descriptor>assembly/dep.xml</descriptor>
- </descriptors>
- </configuration>
- <executions>
- <execution>
- <id>make-assembly</id>
- <phase>package</phase>
- <goals>
- <goal>single</goal>
- </goals>
- </execution>
- </executions>
- </plugin -->
- <!-- now we configure custom action (calling a script) at various lifecycle phases -->
- <plugin>
- <groupId>org.codehaus.mojo</groupId>
- <artifactId>exec-maven-plugin</artifactId>
- <version>1.2.1</version>
- <executions>
- <execution>
- <id>clean phase script</id>
- <phase>clean</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>clean</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>generate-sources script</id>
- <phase>generate-sources</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>generate-sources</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>compile script</id>
- <phase>compile</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>compile</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>package script</id>
- <phase>package</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>package</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>test script</id>
- <phase>test</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>test</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>install script</id>
- <phase>install</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>install</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>deploy script</id>
- <phase>deploy</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>deploy</argument>
- </arguments>
- </configuration>
- </execution>
- </executions>
- </plugin>
- </plugins>
- </build>
-</project>
+++ /dev/null
-#!/usr/bin/env python3
-# -*- indent-tabs-mode: nil -*-
-# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this code except in compliance
-# with the License. You may obtain a copy of the License
-# at http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# permissions and limitations under the License.
-
-from __future__ import print_function
-
-"""
-
- NAME
- check-blueprint-vs-input - given a blueprint and inputs file pair, validate them against each other
-
- USAGE
- check-blueprint-vs-input [-v] [-t] -b BLUEPRINT [-B exclusion-list] -i INPUTS [-B exclusion-list]
-
- DESCRIPTION
-"""
-description = """
- Validate a blueprint and inputs file against each other. This looks for the inputs: node of the blueprint
- file, the inputs used by {get_input} within the blueprint, and the values found in the inputs file. The
- files may be in either YAML or JSON formats. The names default to blueprint.yaml and inputs.yaml. If
- a blueprint inputs name has a default value, it is not considered an error if it is not in the inputs file.
-
- If using a template inputs file, add the -t/--template option. This will look for the inputs under
- an "inputs:" node instead of at the top level.
-
- If there are blueprint nodes or inputs nodes that should not be considered an error, specify them
- using the -B/--blueprint-exclusion-list and -I/inputs-exclusion-list parameters.
-
- "check-blueprint-vs-input --help" will list all of the available options.
-"""
-
-import sys, argparse, json, yaml
-from yaml.composer import Composer
-from yaml.constructor import Constructor
-from yaml.constructor import SafeConstructor
-from yaml.constructor import ScalarNode
-
-def main():
- DEF_BLUEPRINT_NAME = "blueprint.yaml"
- DEF_INPUTS_NAME = "inputs.yaml"
- parser = argparse.ArgumentParser(description=description)
- parser.add_argument("-b", "--blueprint", type=str, help="Path to blueprint file, defaults to '%s'" % DEF_BLUEPRINT_NAME,
- default=DEF_BLUEPRINT_NAME)
- parser.add_argument("-i", "--inputs", type=str, help="Port to listen on, defaults to '%s'" % DEF_INPUTS_NAME,
- default=DEF_INPUTS_NAME)
- parser.add_argument("-B", "--blueprint-exclusion-list", type=str, help="Comma-separated list of names not to warn about not being in the blueprint file", default="")
- parser.add_argument("-I", "--inputs-exclusion-list", type=str, help="Comma-separated list of names not to warn about not being in the inputs file", default="")
- parser.add_argument("-t", "--inputs-template", help="Treat inputs file as coming from template area", action="store_true")
- parser.add_argument("-v", "--verbose", help="Verbose, may be specified multiple times", action="count", default=0)
- args = parser.parse_args()
-
- blueprintExclusionList = args.blueprint_exclusion_list.split(",")
- if args.verbose: print("blueprintExclusionList=%s" % blueprintExclusionList)
-
- inputsExclusionList = args.inputs_exclusion_list.split(",")
- if args.verbose: print("inputsExclusionList=%s" % inputsExclusionList)
-
- def loadYaml(filename, where):
- """
- Load a YAML file
-
- Line number manipulation is inspired by:
- https://stackoverflow.com/questions/13319067/parsing-yaml-return-with-line-number
-
- The YAML loader parses the file first into a set of nodes. Capture the
- line numbers and column numbers during that parsing pass.
- The YAML object is then created from those objects.
- """
-
- def compose_node(parent, index):
- lineno = loader.line # the line number where the previous token has ended (plus empty lines)
- # column = loader.column
- node = Composer.compose_node(loader, parent, index)
- node.__lineno__ = lineno + 1
- # node.__column__ = column + 1
- return node
-
- def construct_scalar(node):
- where[node.value] = str(node.__lineno__) # + ":" + str(node.__column__)
- return SafeConstructor.construct_scalar(loader, node)
-
- def construct_mapping(node, deep=False):
- mapping = SafeConstructor.construct_mapping(loader, node, deep=deep)
- mapping['__lineno__'] = str(node.__lineno__) # + ":" + str(node.__column__)
- return mapping
-
- yread = None
- try:
- with open(filename, "r") as fd:
- yread = fd.read()
- except:
- type, value, traceback = sys.exc_info()
- sys.exit(value)
-
- loader = yaml.SafeLoader(yread)
- loader.compose_node = compose_node
- loader.construct_mapping = construct_mapping
- loader.construct_scalar = construct_scalar
- data = loader.get_single_data()
- if args.verbose > 2:
- print("================ %s ================" % filename)
- yaml.dump(data, sys.stdout)
- print("================================")
- return data
-
- blueprint = loadYaml(args.blueprint, {})
- inputsWhere = { }
- inputs = loadYaml(args.inputs, inputsWhere)
-
- # if inputs file is empty, provide an empty dictionary
- if inputs is None: inputs = { }
-
- # blueprint file has inputs under the inputs: node
- blueprintInputs = blueprint['inputs']
-
- # inputs file normally has inputs at the top level,
- # but templated inputs files have themunder the inputs: node
- if args.inputs_template: inputs = inputs['inputs']
-
-
- exitval = 0
-
- def check_blueprint_inputs(blueprintInputs, inputs, inputsExclusionList):
- """
- check the blueprint inputs against the inputs file
- """
- foundone = False
- for input in blueprintInputs:
- if input == '__lineno__': continue
- if args.verbose: print("blueprint input=%s\n%s" % (input, blueprintInputs[input]))
- if input in inputs:
- if args.verbose: print("\tIS in inputs file")
- else:
- # print("blueprintInputs.get(input)=%s and blueprintInputs[input].get('default')=%s" % (blueprintInputs.get(input), blueprintInputs[input].get('default')))
- if blueprintInputs.get(input) and blueprintInputs[input].get('default'):
- if args.verbose: print("\tHAS a default value")
- elif input not in inputsExclusionList:
- print("<<<<<<<<<<<<<<<< %s (blueprint line %s) not in inputs file" % (input, blueprintInputs[input].get('__lineno__')))
- foundone = True
- else:
- if args.verbose: print("<<<<<<<<<<<<<<<< %s not in inputs file, but being ignored" % input)
- return foundone
-
- # check the blueprint inputs: against the inputs file
- if args.verbose: print("================ check the blueprint inputs: against the inputs file")
- foundone = check_blueprint_inputs(blueprintInputs, inputs, inputsExclusionList)
- if foundone: print("")
- if foundone: exitval = 1
-
- def prettyprint(msg,j):
- print(msg)
- json.dump(j, sys.stdout, indent=4, sort_keys=True)
- print("")
-
- def check_get_inputs(blueprint, blueprintInputs, inputs, inputsExclusionList):
- """
- check the blueprint get_input values against the inputs file
- """
-
- def findInputs(d, where):
- if args.verbose > 2: print("check_get_inputs(): d=%s" % d)
- ret = [ ]
- if isinstance(d, dict):
- if args.verbose: print("type(d) is dict")
- for key,val in d.items():
- linecol = d.get('__lineno__')
- if args.verbose: print("looking at d[key=%s], line=%s" % (key, linecol))
- if key == '__lineno__': continue
- if key == "get_input":
- if args.verbose: print("found get_input, adding '%s'" % val)
- ret += [ val ]
- if not where.get(val): where[val] = str(linecol)
- else: where[val] += "," + str(linecol)
- return ret
- else:
- if args.verbose: print("going recursive on '%s'" % val)
- ret += findInputs(val, where)
- elif isinstance(d, list):
- if args.verbose: print("type(d) is list")
- for val in d:
- if args.verbose: print("going recursive on '%s'" % val)
- ret += findInputs(val, where)
- else:
- if args.verbose: print("type(d) is scalar: %s" % d)
- return ret
-
- foundone = False
- where = {}
- inputList = findInputs(blueprint, where)
- if args.verbose:
- print("done looking for get_input, found:\n%s" % inputList)
- prettyprint("where=",where)
- alreadySeen = { }
- for input in inputList:
- if input not in alreadySeen:
- alreadySeen[input] = True
- if args.verbose: print("checking input %s" % input)
- if input in inputs:
- if args.verbose: print("\tIS in input file")
- else:
- if blueprintInputs.get(input) and blueprintInputs[input].get('default'):
- if args.verbose: print("\tHAS a default value")
- elif input not in inputsExclusionList:
- line = where[input]
- s = "s" if line.find(",") >= 0 else ""
- print(":::::::::::::::: get_input: {0} is NOT in input file (blueprint line{1} {2})".format(input, s, line))
- foundone = True
- else:
- if args.verbose:
- line = where[input]
- s = "s" if line.find(",") >= 0 else ""
- print(":::::::::::::::: get_input: %s is NOT in input file (blueprint line{1} {2}), but being ignored" % (input, s, line))
-
- return foundone
-
-
-
- # check the blueprint's get_input calls against the inputs file
- if args.verbose: print("================ check the blueprint's get_input calls against the inputs file ================")
- foundone = check_get_inputs(blueprint, blueprintInputs, inputs, inputsExclusionList)
- if foundone: print("")
- if foundone: exitval = 1
-
- def check_inputs(blueprintInputs, inputs, blueprintExclusionList):
- """
- check the inputs file against the blueprints inputs list
- """
- foundone = False
- # prettyprint("inputs=", inputs)
- for key,val in inputs.items():
- if key == '__lineno__': continue
- if args.verbose: print("inputs key=%s" % key)
- # print("inputs key=%s, line=%s, val=%s" % (key,inputsWhere[key],val)) # DELETE
- if key in blueprintInputs:
- if args.verbose: print("\tIS in blueprint")
- else:
- if key not in blueprintExclusionList:
- print(">>>>>>>>>>>>>>>> %s is in inputs file (around line %s) but not in blueprint file" % (key, inputsWhere[key]))
- foundone = True
- else:
- if args.verbose: print(">>>>>>>>>>>>>>>> %s is in inputs file (around line %s), but not in blueprint file and being ignored" % (key, inputsWhere[key]))
- return foundone
-
- # check the inputs file against the blueprints input: section
- if args.verbose: print("================ check the inputs file against the blueprints input: section ================")
- foundone = check_inputs(blueprintInputs, inputs, blueprintExclusionList)
- if foundone: exitval = 1
- sys.exit(exitval)
-
-if __name__ == "__main__":
- main()
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-centos7image_id: 'some-value-in-guid-format'
-ubuntu1604image_id: 'another-value-in-guid-format'
-flavor_id: '4'
-security_group: '55a11193-6559-4f6c-b2d2-0119a9817062'
-public_net: 'admin_floating_228_net'
-private_net: 'onap-f-net'
-openstack:
- username: 'MY_LOGIN'
- password: 'MY_PASSWORD'
- tenant_name: 'TENANT_NAME'
- auth_url: 'KEYSTONE_AUTH_URL'
- region: 'RegionOne'
-keypair: 'KEYNME'
-key_filename: '/opt/dcae/key'
-location_prefix: 'onapr1'
-location_domain: 'onapdevlab.onap.org'
-codesource_url: 'https://nexus.onap.org/service/local/repositories/raw/content'
-codesource_version: 'org.onap.dcaegen2.deployments/releases/scripts'
+++ /dev/null
-check-blueprint-vs-input(1UTIL) ONAP check-blueprint-vs-input(1UTIL)
-
-
-
-N\bNA\bAM\bME\bE
- check-blueprint-vs-input
-
-S\bSY\bYN\bNO\bOP\bPS\bSI\bIS\bS
- check-blueprint-vs-input [-h] [-b BLUEPRINT] [-i INPUTS]
- [-B BLUEPRINT_EXCLUSION_LIST]
- [-I INPUTS_EXCLUSION_LIST] [-t] [-v]
-
-D\bDE\bES\bSC\bCR\bRI\bIP\bPT\bTI\bIO\bON\bN
- Validate a blueprint and inputs file against each other. This looks for
- the inputs: node of the blueprint file, the inputs used by {get_input}
- within the blueprint, and the values found in the inputs file. The
- files may be in either YAML or JSON formats. The names default to blue‐
- print.yaml and inputs.yaml. If a blueprint inputs name has a default
- value, it is not considered an error if it is not in the inputs file.
- If using a template inputs file, add the -t/--template option. This
- will look for the inputs under an "inputs:" node instead of at the top
- level. If there are blueprint nodes or inputs nodes that should not be
- considered an error, specify them using the -B/--blueprint- exclusion-
- list and -I/inputs-exclusion-list parameters. "check-blueprint-vs-
- input --help" will list all of the available options.
-
- O\bOP\bPT\bTI\bIO\bON\bNS\bS
- -h, --help show this help message and exit
-
- -b BLUEPRINT, --blueprint BLUEPRINT Path to blueprint file, defaults to
- 'blueprint.yaml'
-
- -i INPUTS, --inputs INPUTS Port to listen on, defaults to 'inputs.yaml'
-
- -B BLUEPRINT_EXCLUSION_LIST, --blueprint-exclusion-list BLUE‐
- PRINT_EXCLUSION_LIST Comma-separated list of names
- not to warn about not
- being in the blueprint file
-
- -I INPUTS_EXCLUSION_LIST, --inputs-exclusion-list INPUTS_EXCLUSION_LIST
- Comma-separated list of names not to warn about not
- being in the inputs file
-
- -t, --inputs-template Treat inputs file as coming from template area
-
- -v, --verbose Verbose, may be specified multiple times
-
-
-
-ONAP {{DATE}} check-blueprint-vs-input(1UTIL)
+++ /dev/null
-'\" Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
-'\"
-'\" Licensed under the Apache License, Version 2.0 (the "License");
-'\" you may not use this code except in compliance
-'\" with the License. You may obtain a copy of the License
-'\" at http://www.apache.org/licenses/LICENSE-2.0
-'\"
-'\" Unless required by applicable law or agreed to in writing, software
-'\" distributed under the License is distributed on an "AS IS" BASIS,
-'\" WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-'\" implied. See the License for the specific language governing
-'\" permissions and limitations under the License.
-.TH check-blueprint-vs-input 1UTIL {{DATE}} ONAP ONAP
-.SH NAME
-check-blueprint-vs-input
-.SH SYNOPSIS
-check-blueprint-vs-input [-h] [-b BLUEPRINT] [-i INPUTS]
- [-B BLUEPRINT_EXCLUSION_LIST]
- [-I INPUTS_EXCLUSION_LIST] [-t] [-v]
-.SH DESCRIPTION
-Validate a blueprint and inputs file against each other. This looks for the
-inputs: node of the blueprint file, the inputs used by {get_input} within the
-blueprint, and the values found in the inputs file. The files may be in either
-YAML or JSON formats. The names default to blueprint.yaml and inputs.yaml. If
-a blueprint inputs name has a default value, it is not considered an error if
-it is not in the inputs file. If using a template inputs file, add the
--t/--template option. This will look for the inputs under an "inputs:" node
-instead of at the top level. If there are blueprint nodes or inputs nodes that
-should not be considered an error, specify them using the -B/--blueprint-
-exclusion-list and -I/inputs-exclusion-list parameters. "check-blueprint-vs-
-input --help" will list all of the available options.
-.SS OPTIONS
-.HP 20
--h, --help
-show this help message and exit
-.HP 20
--b BLUEPRINT, --blueprint BLUEPRINT
-Path to blueprint file, defaults to 'blueprint.yaml'
-.HP 20
--i INPUTS, --inputs INPUTS
-Port to listen on, defaults to 'inputs.yaml'
-.HP 20
--B BLUEPRINT_EXCLUSION_LIST, --blueprint-exclusion-list BLUEPRINT_EXCLUSION_LIST
-Comma-separated list of names not to warn about not
- being in the blueprint file
-.HP 20
--I INPUTS_EXCLUSION_LIST, --inputs-exclusion-list INPUTS_EXCLUSION_LIST
-Comma-separated list of names not to warn about not
- being in the inputs file
-.HP 20
--t, --inputs-template
-Treat inputs file as coming from template area
-.HP 20
--v, --verbose
-Verbose, may be specified multiple times
+++ /dev/null
-<?xml version="1.0"?>
-<!--
-================================================================================
-Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
-================================================================================
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-============LICENSE_END=========================================================
-
-ECOMP is a trademark and service mark of AT&T Intellectual Property.
--->
-<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
- <modelVersion>4.0.0</modelVersion>
- <parent>
- <groupId>org.onap.dcaegen2.platform.blueprints</groupId>
- <artifactId>blueprints</artifactId>
- <version>1.2.0-SNAPSHOT</version>
- </parent>
- <groupId>org.onap.dcaegen2.plaform.blueprints</groupId>
- <artifactId>check-blueprint-vs-input</artifactId>
- <name>dcaegen2-plaform-blueprints-check-blueprint-vs-input</name>
- <version>1.0.0-SNAPSHOT</version>
- <url>http://maven.apache.org</url>
-
- <properties>
- <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
- <sonar.skip>true</sonar.skip>
- <sonar.sources>.</sonar.sources>
- <!-- customize the SONARQUBE URL -->
- <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
- <!-- below are language dependent -->
- <!-- for Python -->
- <sonar.language>py</sonar.language>
- <sonar.pluginName>Python</sonar.pluginName>
- <sonar.inclusions>**/*.py</sonar.inclusions>
- <!-- for JavaScaript -->
- <!--
- <sonar.language>js</sonar.language>
- <sonar.pluginName>JS</sonar.pluginName>
- <sonar.inclusions>**/*.js</sonar.inclusions>
- -->
- </properties>
- <build>
- <finalName>${project.artifactId}-${project.version}</finalName>
- <pluginManagement>
- <plugins>
- <!-- the following plugins are invoked from oparent, we do not need them -->
- <plugin>
- <groupId>org.sonatype.plugins</groupId>
- <artifactId>nexus-staging-maven-plugin</artifactId>
- <version>1.6.7</version>
- <configuration>
- <skipNexusStagingDeployMojo>true</skipNexusStagingDeployMojo>
- </configuration>
- </plugin>
- <plugin>
- <groupId>org.apache.maven.plugins</groupId>
- <artifactId>maven-deploy-plugin</artifactId>
- <!-- This version supports the "deployAtEnd" parameter -->
- <version>2.8</version>
- <configuration>
- <skip>true</skip>
- </configuration>
- </plugin>
- <!-- first disable the default Java plugins at various stages -->
- <!-- maven-resources-plugin is called during "*resource" phases by default behavior. it prepares
- the resources dir. we do not need it -->
- <plugin>
- <groupId>org.apache.maven.plugins</groupId>
- <artifactId>maven-resources-plugin</artifactId>
- <version>2.6</version>
- <configuration>
- <skip>true</skip>
- </configuration>
- </plugin>
- <!-- maven-compiler-plugin is called during "compile" phases by default behavior. we do not need it -->
- <plugin>
- <groupId>org.apache.maven.plugins</groupId>
- <artifactId>maven-compiler-plugin</artifactId>
- <version>3.1</version>
- <configuration>
- <skip>true</skip>
- </configuration>
- </plugin>
- <!-- maven-jar-plugin is called during "compile" phase by default behavior. we do not need it -->
- <plugin>
- <groupId>org.apache.maven.plugins</groupId>
- <artifactId>maven-jar-plugin</artifactId>
- <version>2.4</version>
- <executions>
- <execution>
- <id>default-jar</id>
- <phase/>
- </execution>
- </executions>
- </plugin>
- <!-- maven-install-plugin is called during "install" phase by default behavior. it tries to copy stuff under
- target dir to ~/.m2. we do not need it -->
- <plugin>
- <groupId>org.apache.maven.plugins</groupId>
- <artifactId>maven-install-plugin</artifactId>
- <version>2.4</version>
- <configuration>
- <skip>true</skip>
- </configuration>
- </plugin>
- <!-- maven-surefire-plugin is called during "test" phase by default behavior. it triggers junit test.
- we do not need it -->
- <plugin>
- <groupId>org.apache.maven.plugins</groupId>
- <artifactId>maven-surefire-plugin</artifactId>
- <version>2.12.4</version>
- <configuration>
- <skipTests>true</skipTests>
- </configuration>
- </plugin>
- </plugins>
- </pluginManagement>
- <plugins>
- <!-- plugin>
- <artifactId>maven-assembly-plugin</artifactId>
- <version>2.4.1</version>
- <configuration>
- <descriptors>
- <descriptor>assembly/dep.xml</descriptor>
- </descriptors>
- </configuration>
- <executions>
- <execution>
- <id>make-assembly</id>
- <phase>package</phase>
- <goals>
- <goal>single</goal>
- </goals>
- </execution>
- </executions>
- </plugin -->
- <!-- now we configure custom action (calling a script) at various lifecycle phases -->
- <plugin>
- <groupId>org.codehaus.mojo</groupId>
- <artifactId>exec-maven-plugin</artifactId>
- <version>1.2.1</version>
- <executions>
- <execution>
- <id>clean phase script</id>
- <phase>clean</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>clean</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>generate-sources script</id>
- <phase>generate-sources</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>generate-sources</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>compile script</id>
- <phase>compile</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>compile</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>package script</id>
- <phase>package</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>package</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>test script</id>
- <phase>test</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>test</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>install script</id>
- <phase>install</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>install</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>deploy script</id>
- <phase>deploy</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>deploy</argument>
- <argument>bin/check-blueprint-vs-input</argument>
- <argument>man/check-blueprint-vs-input.1</argument>
- </arguments>
- </configuration>
- </execution>
- </executions>
- </plugin>
- </plugins>
- </build>
-</project>
--- /dev/null
+{
+ "datacenter": "dc1",
+ "data_dir": "/opt/consul",
+ "log_level": "INFO",
+ "server": false,
+ "retry_join": ["consul"],
+ "node_name": "dcae-bootstrap",
+ "disable_update_check": true
+ }
\ No newline at end of file
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-ubuntu1604image_id: '{{ ubuntu_1604_image }}'
-centos7image_id: '{{ centos_7_image }}'
-flavor_id: '{{ flavor_id_cdap }}'
-security_group: '{{ security_group }}'
-public_net: '{{ public_net_id }}'
-private_net: '{{ openstack_private_network_name }}'
-openstack:
- username: '{{ openstack_user }}'
- password: '{{ openstack_password }}'
- tenant_name: '{{ tenant_name }}'
- auth_url: '{{ keystone_url }}'
- region: '{{ openstack_region }}'
-keypair: '{{ key_name }}'
-key_filename: '/opt/dcae/key'
-location_prefix: 'dcae'
-location_domain: '{{ dcae_zone }}.{{ dcae_domain }}'
-codesource_url: 'https://nexus.onap.org/service/local/repositories/raw/content'
-codesource_version: 'org.onap.dcaegen2.deployments/releases'
+++ /dev/null
-# ================================================================================\r
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.\r
-# ================================================================================\r
-# Licensed under the Apache License, Version 2.0 (the "License");\r
-# you may not use this file except in compliance with the License.\r
-# You may obtain a copy of the License at\r
-#\r
-# http://www.apache.org/licenses/LICENSE-2.0\r
-#\r
-# Unless required by applicable law or agreed to in writing, software\r
-# distributed under the License is distributed on an "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-# See the License for the specific language governing permissions and\r
-# limitations under the License.\r
-# ============LICENSE_END=========================================================\r
-\r
-#dmaap_host: '{{ dmaap_host }}'\r
-#dmaap_port: '{{ dmaap_port }}'\r
-#dmaap_user: '{{ dmaap_user }}'\r
-#dmaap_passwd: '{{ dmaap_passwd }}'\r
-#tag_version: '{{ tag_version }}'\r
-#replicas: '{{ replicas }}'
\ No newline at end of file
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-application_config:
- cloudify:
- protocol: "http"
- inventory:
- protocol: "http"
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-{
- "dh_location_id": "{{ dcae_zone }}",
- "docker_host_override": "component_dockerhost",
- "msb_hostname": "{{ openo_ip_addr }}",
- "dcae_CL_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.DCAE_CL_OUTPUT",
- "ves_fault_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.SEC_FAULT_OUTPUT",
- "location_domain" : "{{ dcae_zone }}.{{ dcae_domain }}",
- "location_prefix" : "dcae",
- "pgaas_cluster_name" : "pgvm",
- "database_name":"holmes"
-}
+++ /dev/null
-{
- "dh_location_id": "{{ dcae_zone }}",
- "docker_host_override": "component_dockerhost",
- "dcae_CL_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.DCAE_CL_OUTPUT/",
- "ves_heartbeat_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.SEC_HEARTBEAT_OUTPUT/",
- "tag_version": "nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.heartbeat:2.0"
-}
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-{
- "dh_location_id": "{{ dcae_zone }}",
- "docker_host_override": "component_dockerhost",
- "msb_hostname": "{{ openo_ip_addr }}",
- "location_domain" : "{{ dcae_zone }}.{{ dcae_domain }}",
- "location_prefix" : "dcae",
- "pgaas_cluster_name" : "pgvm",
- "database_name":"holmes"
-}
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-ubuntu1604image_id: '{{ ubuntu_1604_image }}'
-centos7image_id: '{{ centos_7_image }}'
-flavor_id: '{{ flavor_id }}'
-security_group: '{{ security_group }}'
-public_net: '{{ public_net_id }}'
-private_net: '{{ openstack_private_network_name }}'
-openstack:
- username: '{{ openstack_user }}'
- password: '{{ openstack_password }}'
- tenant_name: '{{ tenant_name }}'
- auth_url: '{{ keystone_url }}'
- region: '{{ openstack_region }}'
-keypair: '{{ key_name }}'
-key_filename: '/opt/dcae/key'
-location_prefix: 'dcae'
-location_domain: '{{ dcae_zone }}.{{ dcae_domain }}'
-codesource_url: 'https://nexus.onap.org/service/local/repositories/raw/content'
-codesource_version: 'org.onap.dcaegen2.deployments/releases'
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-docker_host_override: "platform_dockerhost"
-asdc_address: '{{ sdc_ip_addr }}:8443'
-asdc_uri: 'https://{{ sdc_ip_addr }}:8443'
-asdc_user: "dcae"
-asdc_password: !!str Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
-asdc_environment_name: "AUTO"
-postgres_user_inventory: "postgres"
-postgres_password_inventory: "onap123"
-service_change_handler_image: "{{ nexus_docker_repo }}/onap/org.onap.dcaegen2.platform.servicechange-handler:v1.0.0"
-inventory_image: "{{ nexus_docker_repo }}/onap/org.onap.dcaegen2.platform.inventory-api:v1.2.0"
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-
-application_config:
- policy_handler :
- # parallelize the getConfig queries to policy-engine on each policy-update notification
- thread_pool_size : 4
-
- # parallelize requests to policy-engine and keep them alive
- pool_connections : 20
-
- # retry to getConfig from policy-engine on policy-update notification
- policy_retry_count : 5
- policy_retry_sleep : 5
-
- # mode of operation for the policy-handler
- # either active or passive
- # in passive mode the policy-hanlder will not listen to
- # and will not bring the policy-updates from policy-engine
- mode_of_operation : "active"
-
- # config of automatic catch_up for resiliency
- catch_up :
- # interval in seconds on how often to call automatic catch_up
- # example: 1200 is 20*60 seconds that is 20 minutes
- interval : 1200
-
- # config of periodic reconfigure-rediscover for adaptability
- reconfigure:
- # interval in seconds on how often to call automatic reconfigure
- # example: 600 is 10*60 seconds that is 10 minutes
- interval : 600
-
- # policy-engine config
- # These are the url of and the auth for the external system, namely the policy-engine (PDP).
- # We obtain that info manually from PDP folks at the moment.
- # In long run we should figure out a way of bringing that info into consul record
- # related to policy-engine itself.
- policy_engine :
- url : "http://{{ policy_ip_addr }}:8081"
- path_decision : "/decision/v1"
- path_notifications : "/pdp/notifications"
- path_api : "/pdp/api/"
- headers :
- Accept : "application/json"
- "Content-Type" : "application/json"
- ClientAuth : "cHl0aG9uOnRlc3Q="
- Authorization : "Basic dGVzdHBkcDphbHBoYTEyMw=="
- Environment : "TEST"
- target_entity : "policy_engine"
- # optional tls_ca_mode specifies where to find the cacert.pem for tls
- # can be one of these:
- # "cert_directory" - use the cacert.pem stored locally in cert_directory.
- # this is the default if cacert.pem file is found
- #
- # "os_ca_bundle" - use the public ca_bundle provided by linux system.
- # this is the default if cacert.pem file not found
- #
- # "do_not_verify" - special hack to turn off the verification by cacert and hostname
- tls_ca_mode : "cert_directory"
- # optional tls_wss_ca_mode specifies the same for the tls based web-socket
- tls_wss_ca_mode : "cert_directory"
- # optional timeout_in_secs specifies the timeout for the http requests
- timeout_in_secs: 60
- # optional ws_ping_interval_in_secs specifies the ping interval for the web-socket connection
- ws_ping_interval_in_secs: 30
- # deploy_handler config
- # changed from string "deployment_handler" in 2.3.1 to structure in 2.4.0
- deploy_handler :
- # name of deployment-handler service used by policy-handler for logging
- target_entity : "deployment_handler"
- # url of the deployment-handler service for policy-handler to direct the policy-updates to
- # - expecting dns to resolve the hostname deployment-handler to ip address
- url : "http://deployment-handler:8188"
- # limit the size of a single data segment for policy-update messages
- # from policy-handler to deployment-handler in megabytes
- max_msg_length_mb : 5
- query :
- # optionally specify the tenant name for the cloudify under deployment-handler
- # if not specified the "default_tenant" is used by the deployment-handler
- cfy_tenant_name : "default_tenant"
- # optional tls_ca_mode specifies where to find the cacert.pem or skip tls verification
- # can be one of these:
- # "cert_directory" - use the cacert.pem stored locally in cert_directory.
- # this is the default if cacert.pem file is found
- #
- # "os_ca_bundle" - use the public ca_bundle provided by linux system.
- # this is the default if cacert.pem file not found
- #
- # "do_not_verify" - special hack to turn off the verification by cacert and hostname
- tls_ca_mode : "cert_directory"
- # optional timeout_in_secs specifies the timeout for the http requests
- timeout_in_secs: 60
+++ /dev/null
-<?xml version="1.0"?>
-<!--
-================================================================================
-Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
-================================================================================
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-============LICENSE_END=========================================================
-
-ECOMP is a trademark and service mark of AT&T Intellectual Property.
--->
-<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
- <modelVersion>4.0.0</modelVersion>
- <parent>
- <groupId>org.onap.dcaegen2.platform</groupId>
- <artifactId>blueprints</artifactId>
- <version>1.2.0-SNAPSHOT</version>
- </parent>
- <groupId>org.onap.dcaegen2.platform.blueprints</groupId>
- <artifactId>input-templates</artifactId>
- <name>dcaegen2-platform-blueprints-input-templates</name>
- <version>1.0.0-SNAPSHOT</version>
- <url>http://maven.apache.org</url>
-
- <properties>
- <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
- <sonar.skip>true</sonar.skip>
- <sonar.sources>.</sonar.sources>
- <!-- customize the SONARQUBE URL -->
- <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
- <!-- below are language dependent -->
- <!-- for Python -->
- <sonar.language>py</sonar.language>
- <sonar.pluginName>Python</sonar.pluginName>
- <sonar.inclusions>**/*.py</sonar.inclusions>
- <!-- for JavaScaript -->
- <!--
- <sonar.language>js</sonar.language>
- <sonar.pluginName>JS</sonar.pluginName>
- <sonar.inclusions>**/*.js</sonar.inclusions>
- -->
- </properties>
- <build>
- <finalName>${project.artifactId}-${project.version}</finalName>
- <plugins>
- <!-- plugin>
- <artifactId>maven-assembly-plugin</artifactId>
- <version>2.4.1</version>
- <configuration>
- <descriptors>
- <descriptor>assembly/dep.xml</descriptor>
- </descriptors>
- </configuration>
- <executions>
- <execution>
- <id>make-assembly</id>
- <phase>package</phase>
- <goals>
- <goal>single</goal>
- </goals>
- </execution>
- </executions>
- </plugin -->
- <!-- now we configure custom action (calling a script) at various lifecycle phases -->
- <plugin>
- <groupId>org.codehaus.mojo</groupId>
- <artifactId>exec-maven-plugin</artifactId>
- <version>1.2.1</version>
- <executions>
- <execution>
- <id>clean phase script</id>
- <phase>clean</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>clean</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>generate-sources script</id>
- <phase>generate-sources</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>generate-sources</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>compile script</id>
- <phase>compile</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>compile</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>package script</id>
- <phase>package</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>package</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>test script</id>
- <phase>test</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>test</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>install script</id>
- <phase>install</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>install</argument>
- </arguments>
- </configuration>
- </execution>
- <execution>
- <id>deploy script</id>
- <phase>deploy</phase>
- <goals>
- <goal>exec</goal>
- </goals>
- <configuration>
- <arguments>
- <argument>${project.artifactId}</argument>
- <argument>deploy</argument>
- </arguments>
- </configuration>
- </execution>
- </executions>
- </plugin>
- </plugins>
- </build>
-</project>
+++ /dev/null
-{
- "dh_location_id": "{{ dcae_zone }}",
- "docker_host_override": "component_dockerhost",
- "prh_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.unauthenticated.PNF_READY/",
- "prh_subscribe_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.VES_PNFREG_OUTPUT/",
- "tag_version": "nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.prh:1.2.2"
-}
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-#aaiEnrichmentHost: '{{ aaiEnrichmentHost }}'
-#aaiEnrichmentPort: '{{ aaiEnrichmentPort }}'
-#aaiEnrichmentUser: '{{ aaiEnrichmentUser }}'
-#aaiEnrichmentPasswd: '{{ aaiEnrichmentPasswd }}'
-#dmaap_host: '{{ dmaap_host }}'
-#dmaap_port: '{{ dmaap_port }}'
-#dmaap_user: '{{ dmaap_user }}'
-#dmaap_passwd: '{{ dmaap_passwd }}'
-#tag_version: '{{ tag_version }}'
-#replicas: '{{ replicas }}'
\ No newline at end of file
+++ /dev/null
-
-{
- "dh_location_id": "{{ dcae_zone }}",
- "docker_host_override": "component_dockerhost",
- "snmp_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.ONAP-COLLECTOR-SNMPTRAP/",
- "tag_version": "nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.snmptrap:1.3"
-}
+++ /dev/null
-{
- "aaiEnrichmentHost": "{{ aai1_ip_addr }}",
- "enableAAIEnrichment": true,
- "subscriberHostName": "{{ mr_ip_addr }}",
- "publisherHostName": "{{ mr_ip_addr }}",
- "dh_location_id": "{{ dcae_zone }}",
- "dh_override": "component_dockerhost",
- "redisHosts": "{{ redis_ip_port_addr }}",
- "enableRedisCaching": true,
- "tag_version": "nexus3.onap.org:10001/onap/tca-cdap-container:1.0"
-}
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-aaiEnrichmentHost: '{{ aai1_ip_addr }}'
-enableAAIEnrichment: true
-subscriberHostName: '{{ mr_ip_addr }}'
-publisherHostName: '{{ mr_ip_addr }}'
+++ /dev/null
-# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-{
- "dh_location_id": "{{ dcae_zone }}",
- "dh_override": "component_dockerhost",
- "ves_other_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.SEC_OTHER_OUTPUT/",
- "ves_heartbeat_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.SEC_HEARTBEAT_OUTPUT/",
- "ves_fault_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.SEC_FAULT_OUTPUT/",
- "ves_measurement_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.SEC_MEASUREMENT_OUTPUT/",
- "ves_pnfRegistration_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.VES_PNFREG_OUTPUT/",
- "ves_notification_publish_url": "http://{{ mr_ip_addr }}:3904/events/unauthenticated.VES_NOTIFICATION_OUTPUT/"
-}
#!/bin/bash
# ================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# Copyright (c) 2017-2020 AT&T Intellectual Property. All rights reserved.
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
echo "SETTINGS_FILE environment variable not set. Cannot proceed"
exit
fi
-
+
# mvn phase in life cycle
echo "==> install phase script"
;;
deploy)
- echo "==> deploy phase script"
- if [ -z "$MVN_PROJECT_MODULEID" ]; then
- upload_files_of_extension yaml
- else
- upload_files_of_extension yaml "$MVN_PROJECT_MODULEID"
- fi
+ build_and_push_docker
;;
*)
echo "==> unprocessed phase"
<artifactId>oparent</artifactId>
<version>1.2.0</version>
</parent>
- <groupId>org.onap.dcaegen2.platform</groupId>
- <artifactId>blueprints</artifactId>
- <name>dcaegen2-platform-blueprints</name>
- <version>1.2.0-SNAPSHOT</version>
+ <groupId>org.onap.dcaegen2.deployments</groupId>
+ <artifactId>k8s-bootstrap-container</artifactId>
+ <name>dcaegen2-deployments-k8s-bootstrap-container</name>
+ <version>1.9.0-SNAPSHOT</version>
<url>http://maven.apache.org</url>
<packaging>pom</packaging>
- <modules>
- <module>blueprints</module>
- <module>input-templates</module>
- </modules>
<properties>
<onap.nexus.url>https://nexus.onap.org</onap.nexus.url>
</configuration>
</plugin>
<!-- first disable the default Java plugins at various stages -->
- <!-- maven-resources-plugin is called during "*resource" phases by default behavior. it prepares
+ <!-- maven-resources-plugin is called during "*resource" phases by default behavior. it prepares
the resources dir. we do not need it -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
</execution>
</executions>
</plugin>
- <!-- maven-install-plugin is called during "install" phase by default behavior. it tries to copy stuff under
+ <!-- maven-install-plugin is called during "install" phase by default behavior. it tries to copy stuff under
target dir to ~/.m2. we do not need it -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
</plugin>
</plugins>
</pluginManagement>
+ <plugins>
+ <!-- now we configure custom action (calling a script) at various lifecycle phases -->
+ <plugin>
+ <groupId>org.codehaus.mojo</groupId>
+ <artifactId>exec-maven-plugin</artifactId>
+ <version>1.2.1</version>
+ <executions>
+ <execution>
+ <id>clean phase script</id>
+ <phase>clean</phase>
+ <goals>
+ <goal>exec</goal>
+ </goals>
+ <configuration>
+ <arguments>
+ <argument>${project.artifactId}</argument>
+ <argument>clean</argument>
+ </arguments>
+ </configuration>
+ </execution>
+ <execution>
+ <id>generate-sources script</id>
+ <phase>generate-sources</phase>
+ <goals>
+ <goal>exec</goal>
+ </goals>
+ <configuration>
+ <arguments>
+ <argument>${project.artifactId}</argument>
+ <argument>generate-sources</argument>
+ </arguments>
+ </configuration>
+ </execution>
+ <execution>
+ <id>compile script</id>
+ <phase>compile</phase>
+ <goals>
+ <goal>exec</goal>
+ </goals>
+ <configuration>
+ <arguments>
+ <argument>${project.artifactId}</argument>
+ <argument>compile</argument>
+ </arguments>
+ </configuration>
+ </execution>
+ <execution>
+ <id>package script</id>
+ <phase>package</phase>
+ <goals>
+ <goal>exec</goal>
+ </goals>
+ <configuration>
+ <arguments>
+ <argument>${project.artifactId}</argument>
+ <argument>package</argument>
+ </arguments>
+ </configuration>
+ </execution>
+ <execution>
+ <id>test script</id>
+ <phase>test</phase>
+ <goals>
+ <goal>exec</goal>
+ </goals>
+ <configuration>
+ <arguments>
+ <argument>${project.artifactId}</argument>
+ <argument>test</argument>
+ </arguments>
+ </configuration>
+ </execution>
+ <execution>
+ <id>install script</id>
+ <phase>install</phase>
+ <goals>
+ <goal>exec</goal>
+ </goals>
+ <configuration>
+ <arguments>
+ <argument>${project.artifactId}</argument>
+ <argument>install</argument>
+ </arguments>
+ </configuration>
+ </execution>
+ <execution>
+ <id>deploy script</id>
+ <phase>deploy</phase>
+ <goals>
+ <goal>exec</goal>
+ </goals>
+ <configuration>
+ <arguments>
+ <argument>${project.artifactId}</argument>
+ <argument>deploy</argument>
+ </arguments>
+ </configuration>
+ </execution>
+ </executions>
+ </plugin>
+ </plugins>
</build>
</project>
--- /dev/null
+#!/bin/bash
+# ================================================================================
+# Copyright (c) 2018-2020 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+# Install DCAE via Cloudify Manager
+# Expects:
+# CM address (IP or DNS) in CMADDR environment variable
+# CM password in CMPASS environment variable (assumes user is "admin")
+# ONAP common Kubernetes namespace in ONAP_NAMESPACE environment variable
+# If DCAE components are deployed in a separate Kubernetes namespace, that namespace in DCAE_NAMESPACE variable.
+# Consul address with port in CONSUL variable
+# Plugin wagon files in /wagons
+# Blueprints for components to be installed in /blueprints
+# Input files for components to be installed in /inputs
+# Configuration JSON files that need to be loaded into Consul in /dcae-configs
+# Consul is installed in /opt/consul/bin/consul, with base config in /opt/consul/config/00consul.json
+# Optionally, allows:
+# CM protocol in CMPROTO environment variable (defaults to HTTP)
+# CM port in CMPORT environment variable (defaults to 80)
+# If CMPROTO is set to "https", bootstrap will use HTTPS to communicate with CM. Otherwise,
+# it will use HTTP.
+# If CMPROTO is set to "https", the script assumes the CA cert needed to verify the cert
+# presented by CM is mounted at /certs/cacert.pem.
+
+# Set defaults for CM protocol and port
+CMPROTO=${CMPROTO:-http}
+CMPORT=${CMPORT:-80}
+
+# Set up additional parameters for using HTTPS
+CFYTLS=""
+CURLTLS=""
+if [ $CMPROTO = "https" ]
+then
+ CFYTLS="--rest-certificate /certs/cacert.pem --ssl"
+ CURLTLS="--cacert /certs/cacert.pem"
+fi
+
+### FUNCTION DEFINITIONS ###
+
+# keep_running: Keep running after bootstrap finishes or after error
+keep_running() {
+ echo $1
+ sleep infinity &
+ wait
+}
+
+# cm_hasany: Query Cloudify Manager and return 0 (true) if there are any entities matching the query
+# Used to see if something is already present on CM
+# $1 -- query fragment, for instance "plugins?archive_name=xyz.wgn" to get
+# the number of plugins that came from the archive file "xyz.wgn"
+function cm_hasany {
+ # We use _include=id to limit the amount of data the CM sends back
+ # We rely on the "metadata.pagination.total" field in the response
+ # for the total number of matching entities
+ COUNT=$(curl -Ss -H "Tenant: default_tenant" --user admin:${CMPASS} ${CURLTLS} "${CMPROTO}://${CMADDR}:${CMPORT}/api/v3.1/$1&_include=id" \
+ | /bin/jq .metadata.pagination.total)
+ if (( $COUNT > 0 ))
+ then
+ return 0
+ else
+ return 1
+ fi
+}
+
+# deploy: Deploy components if they're not already deployed
+# $1 -- name (for bp and deployment)
+# $2 -- blueprint file name
+# $3 -- inputs file name (optional)
+function deploy {
+ # Don't crash the script on error
+ set +e
+
+ # Upload blueprint if it's not already there
+ if cm_hasany "blueprints?id=$1"
+ then
+ echo blueprint $1 is already installed on ${CMADDR}
+ else
+ cfy blueprints upload -b $1 /blueprints/$2
+ fi
+
+ # Create deployment if it doesn't already exist
+ if cm_hasany "deployments?id=$1"
+ then
+ echo deployment $1 has already been created on ${CMADDR}
+ else
+ INPUTS=
+ if [ -n "$3" ]
+ then
+ INPUTS="-i/inputs/$3"
+ fi
+ cfy deployments create -b $1 ${INPUTS} $1
+ fi
+
+ # Run the install workflow if it hasn't been run already
+ # We don't have a completely certain way of determining this.
+ # We check to see if the deployment has any node instances
+ # that are in the 'uninitialized' or 'deleted' states. (Note that
+ # the & in the query acts as a logical OR for the multiple state values.)
+ # We'll try to install when a deployment has node instances in those states
+ if cm_hasany "node-instances?deployment_id=$1&state=uninitialized&state=deleted"
+ then
+ cfy executions start -d $1 install
+ else
+ echo deployment $1 appears to have had an install workflow executed already or is not ready for an install
+ fi
+}
+
+# Install plugin if it's not already installed
+# $1 -- path to wagon file for plugin
+function install_plugin {
+ ARCHIVE=$(basename $1)
+ # See if it's already installed
+ if cm_hasany "plugins?archive_name=$ARCHIVE"
+ then
+ echo plugin $1 already installed on ${CMADDR}
+ else
+ cfy plugin upload $1
+ fi
+}
+
+### END FUNCTION DEFINTIONS ###
+
+set -x
+
+# Make sure we keep the container alive after an error
+trap keep_running ERR
+
+set -e
+
+# Consul service registration data
+CBS_REG='{"ID": "dcae-cbs0", "Name": "config_binding_service", "Address": "config-binding-service", "Port": 10000}'
+CBS_REG1='{"ID": "dcae-cbs1", "Name": "config-binding-service", "Address": "config-binding-service", "Port": 10000}'
+
+# Set up profile to access Cloudify Manager
+cfy profiles use -u admin -t default_tenant -p "${CMPASS}" ${CFYTLS} "${CMADDR}"
+
+# Output status, for debugging purposes
+cfy status
+
+# Check Consul readiness
+# The readiness container waits for a "consul-server" container to be ready,
+# but this isn't always enough. We need the Consul API to be up and for
+# the cluster to be formed, otherwise our Consul accesses might fail.
+# (Note in ONAP R2, we never saw a problem, but occasionally in R3 we
+# have seen Consul not be fully ready, so we add these checks, originally
+# used in the R1 HEAT-based deployment.)
+# Wait for Consul API to come up
+until curl http://${CONSUL}/v1/agent/services
+do
+ echo Waiting for Consul API
+ sleep 60
+done
+# Wait for a leader to be elected
+until [[ "$(curl -Ss http://{$CONSUL}/v1/status/leader)" != '""' ]]
+do
+ echo Waiting for leader
+ sleep 30
+done
+
+# Load configurations into Consul KV store
+for config in /dcae-configs/*.json
+do
+ # The basename of the file is the Consul key
+ key=$(basename ${config} .json)
+ # Strip out comments, empty lines
+ egrep -v "^#|^$" ${config} > /tmp/dcae-upload
+ curl -v -X PUT -H "Content-Type: application/json" --data-binary @/tmp/dcae-upload ${CONSUL}/v1/kv/${key}
+done
+
+# Put service registrations into the local Consul configuration directory
+for sr in CBS_REG CBS_REG1
+do
+ echo '{"service" : ' ${!sr} ' }'> /opt/consul/config/${sr}.json
+done
+
+# Start the local consul agent instance
+/opt/consul/bin/consul agent --config-dir /opt/consul/config 2>&1 | tee /opt/consul/consul.log &
+
+# Store the CM password into a Cloudify secret
+cfy secret create -s ${CMPASS} cmpass
+
+# Load plugins onto CM
+for wagon in /wagons/*.wgn
+do
+ install_plugin ${wagon}
+done
+
+# In some oversubscribed cloud environments, we have
+# observed that even though the plugin installations appear
+# to have completed, there are background installation tasks
+# that might still be running. So we check for running system workflows
+while cm_hasany "executions?is_system_workflow=true&status=pending&status=started&status=queued&status=scheduled"
+do
+ echo "Waiting for running system workflows to complete"
+ sleep 15
+done
+
+# After this point, failures should not stop the script or block later commands
+trap - ERR
+set +e
+
+# Initialize the DCAE postgres instance
+deploy pgaas_initdb k8s-pgaas-initdb.yaml k8s-pgaas-initdb-inputs.yaml
+
+# Deploy service components
+# tca, ves, prh, hv-ves, datafile-collector can be deployed simultaneously
+deploy tca k8s-tca.yaml k8s-tca-inputs.yaml &
+deploy ves k8s-ves.yaml k8s-ves-inputs.yaml &
+deploy prh k8s-prh.yaml k8s-prh-inputs.yaml &
+deploy hv-ves k8s-hv-ves.yaml k8s-hv_ves-inputs.yaml &
+# holmes_rules must be deployed before holmes_engine, but holmes_rules can go in parallel with other service components
+deploy holmes_rules k8s-holmes-rules.yaml k8s-holmes_rules-inputs.yaml
+deploy holmes_engine k8s-holmes-engine.yaml k8s-holmes_engine-inputs.yaml
+
+# Display deployments, for debugging purposes
+cfy deployments list
+
+# Continue running
+keep_running "Finished bootstrap steps."
+echo "Exiting!"
--- /dev/null
+#!/bin/bash
+# ============LICENSE_START=======================================================
+# org.onap.dcae
+# ================================================================================
+# Copyright (c) 2018-2020 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+# Pull plugin archives from repos
+# $1 is the DCAE repo URL
+# $2 is the CCSDK repo URL
+# (This script runs at Docker image build time)
+#
+set -x
+set -e
+DEST=wagons
+
+# For DCAE, starting in R5, we pull down wagons directly
+DCAEPLUGINFILES=\
+"\
+k8splugin/1.7.2/k8splugin-1.7.2-py27-none-linux_x86_64.wgn
+relationshipplugin/1.1.0/relationshipplugin-1.1.0-py27-none-linux_x86_64.wgn
+clamppolicyplugin/1.1.0/clamppolicyplugin-1.1.0-py27-none-linux_x86_64.wgn
+dcaepolicyplugin/2.4.0/dcaepolicyplugin-2.4.0-py27-none-linux_x86_64.wgn \
+"
+
+# For CCSDK, we pull down the wagon files directly
+CCSDKPLUGINFILES=\
+"\
+plugins/pgaas-1.1.0-py27-none-any.wgn
+plugins/dmaap-1.3.5-py27-none-any.wgn
+plugins/sshkeyshare-1.0.0-py27-none-any.wgn
+plugins/helm-4.0.0-py27-none-linux_x86_64.wgn
+"
+
+# Copy a set of wagons from a repo
+# $1 -- repo baseURL
+# $2 -- list of paths to wagons in the repo
+function get_wagons {
+ for wagon in $2
+ do
+ target=$(basename ${wagon})
+ curl -Ssf $1/${wagon} > ${DEST}/${target}
+ done
+}
+
+mkdir ${DEST}
+get_wagons $1 "${DCAEPLUGINFILES}"
+get_wagons $2 "${CCSDKPLUGINFILES}"
+#!/bin/bash
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
# ================================================================================
# See the License for the specific language governing permissions and
# limitations under the License.
# ============LICENSE_END=========================================================
+
+# Clean up DCAE during ONAP uninstall
+
+set -x
+set +e
+
+# Leave the Consul cluster
+/opt/consul/bin/consul leave
+
+# Uninstall components managed by Cloudify
+# Get the list of deployment ids known to Cloudify via curl to Cloudify API.
+# The output of the curl is JSON that looks like {"items" :[{"id": "config_binding_service"}, ...], "metadata" :{...}}
#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-{
- "dh_location_id": "{{ dcae_zone }}",
- "dh_override": "component_dockerhost",
- "cdap_cluster_name": "cdap"
-}
+# jq gives us the just the deployment ids (e.g., "config_binding_service"), one per line
+#
+# xargs -I lets us run the cfy uninstall command once for each deployment id extracted by jq
+
+curl -Ss --user admin:$CMPASS -H "Tenant: default_tenant" "$CMADDR/api/v3.1/deployments?_include=id" \
+| /bin/jq .items[].id \
+| xargs -I % sh -c 'cfy uninstall %'
Code Review / dcaegen2 / platform / blueprints.git / commitdiff